Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Record Of Release Versio n No. 1.0 Created / Modified By Mugdha Sawant Reviewed By Sachin Tamhane Release Date Modifications Done
03/01/2011
Project ID:
E6806
Project Name:
FSS BW Operation
Scope of Document: This document helps us understand the steps to be followed incase we encounter a failure in the daily load monitoring process. Steps: Step1: The Identification of a chain failure would be done through the program /SSA/BWT through which we monitor all the chains. Step2: If the chain fails, go to the process chain and identify the failed process type Step3: Right Click on the failed process type and read the error message. Incase of load failures, if the display messages is not comprehensible, then go to the process monitor of that particular failed load and try to analyze the issue in the details tab. Given below are a few examples of failures that are commonly encountered on daily basis: 1) Changerun Failure: If you receive any of the below errors:
Page 2 of 13
Page 3 of 13
From this error message it is not clear what the error is, hence we have to go to the process monitor for understanding in detail
Page 4 of 13
Page 5 of 13
3) Datasource replication:
Page 6 of 13
Page 7 of 13
Error 7 in update.doc
After taking the corrective action if you have repeated the process chain then the Chain would move ahead once the failed process type is successfully completed. However if you have taken manual action on the failed process type then you have to force green the failed process type by following the below steps Step1: Right click on the failed process type and go to the display messages
Page 8 of 13
Page 9 of 13
Incase if either of the two(Instance/variant) are missing then note down the Job count number.
Page 10 of 13
Step3: Go to table rspcprocesslog in SE16 and enter the instance and variant taken from the previous step
Page 11 of 13
Page 12 of 13
Step6: Enter the Login ID, Type, Variant and instance obtained from SE16 and make the state as G
Step7: Execute the function Module The chain would be moved ahead successfully
Page 13 of 13