Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Type IH15A
1/88
Component series 1X Maximum operating pressure 500 bar Maximum flow 14 l/min
upe2_1x_d
Overview of contents
Contents Features Description, general Technical data Module overview Basic module Modules Connection module Pressure relief module Pressure maintaining module Lifting/lowering module Directional valve module Modules Connection module with electrical unloading Pressure relief module with a valve station Cooler module Sandwich module For information regarding the available spare parts see: www.boschrexroth.com/spc Page 2 3 4 5 to 7 Contents Poppet valve module Modules 19 Pressure filter module with pressure relief valve NS6 24 Pressure sequence module 28 Pressure relief module 25 Pressure relief module NS6 26 Pressure relief module with circulation valve 27 Pressure reducing module 31 End module 57 End module with pressure switch 58 to 60 End module with pressure switch and isolator valve 61 to 63 End module with accumulator and isolator valve 64 to 66 Filter module 20 Filter module with pressure relief valve 21 to 22 Filter modul with pressure relief valve and circulation valve 23 Module with pressure switch 54 to 55 Module with check valve 52 to 53 Page
8 9 10 12 to 13 11
14 15 16 17 18
Continued on page 2
2/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Overview of contents
Contents Module P Module SAB4 Module SAT2 Module SBAT2 with pressure relief valve Module SPA2 Module SPA3 Module SPAT2 Module SPAT2 with pressure relief valve Module SPAT3 with pressure relief valve Module SPBAT2 with pressure relief valve Proportional pressure relief module Proportional pressure reducing module Accumulator safety module Circulation module Circulation module with isolator valve Sandwich module with P1 - port blocked Module for separate mounting Modules with application examples Connection module Connection module with pressure relief valve End module Sandwich module Page 34 49 to 51 36 40 to 41 35 44 to 46 37 to 38 39 47 to 48 42 to 43 29 30 67 to 68 33 32 56 Contents Reducing module Reservoir connection module with reduction to the IH15A Reducing module IH15B to IH15A (right) Module with threaded connections, for line mounting Pressure reducing module Module SPA2G Module SPA3G Page 74 74
75 76 77
Type codes Type codes details 78 to 84 86 Type codes for modules with vertical stacking assemblies Accessories Filter element Assembly tools Dimensions Unit dimensions Reservoir cut-out
87 87
69 70 71 73 72
3 87
Features
Compact design No piping of the controls Few separation points Variable assembly Can be individually combined Can be directly mounted onto the clamping and drive module, can also be separately mounted Can be directly mounted onto the power units reservoir cover Ready for connection
RE 51144/09.05
IH15A
3/88
Description, general
The control module IH15A for the UPE2 / UPE3 (RE 51142 / RE 51147) clamping and drive modules are used to form complete hydraulic controls. They can be individually designed and assembled. The directional valve modules and poppet valve modules can be combined. It is possible to mount these control modules directly onto the UPE2 / UPE3 clamping and drive modules. It is possible, by using the appropriate modules, to separately fit the hydraulic controls into any system. The reducing module type RBAIH15A makes it possible to directly mount the IH15A module onto the reservoir cover of a conventional power unit. With the type RIH15AR reducing module it is possible to mount the hydraulic control onto the control of the IH15B control module family. The modules are designed for use with hydraulic controls which have actuators that have low flow requirements up to 14 l/min. They are joined together via two tie rods.
Type
NS 3 4 5 7 7 9
C 85 85 98 98 135 135
UPE2
Ref. axis X
UPE3
Ref. axis Y 1)
Ref. axis Z
X, Y and Z are the reference axes for determining the installation dimensions when mounting a control block. For calculating the installation heights the dimensions of the utilised control blocks, the height dimensions X on pages 15 to 18 and 20 to 67 have to be added together.
10
1) 2)
Ref. axis Y 2)
4/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Technical data (for applicatons outside these parameters, please consult us!)
Hydraulic
Installation Pressure fluid Pressure fluid temperature range C Optional 1) Mineral oil (HL, HLP) to DIN 51524 part 2 other pressure fluids on request 20 to +80 (with FKM seals) (the permissible viscosity range of the pump and valves have to be taken into account!) 30 to +50 2.8 to 500 1) Class 20/18/15 1) See the associated RE sheet 20 (2/2-directional poppet valve) qv l/min 12 (3/2-directional poppet valve)
C mm2/s
Maximum permissible degree of pressure fluid contamination. Cleanliness class to ISO 4406 (c) Valve pressure stage Directional poppet valve maximum flow Type: KSER1...
Electrical
Voltage type Available voltages 2) Voltage tolerance (nominal voltage) Power consumption Switching time to ISO 6403 Switching frequency Protection to DIN 40050 3) Coil temperature
1) 2) 3) 4) 4)
Valve details to be taken into account Special voltages on request With mounted and fixed plug-in connector Due to the surface temperatures of the solenoids, the European standards EN563 and EN982 have to be taken into account!
RE 51144/09.05
IH15A
5/88
Module overview
Basic module G Basic module with integrated pressure relief valve for simple lifting/lowering or pressure maintaining functions When using the basic module G is it not possible to fit further stacking units. For further details see page 8
UPE2_G
Basic module G Directional valve module W Makes it possible to design controls using valves with a porting pattern to DIN 24340 form A The number of directional valve modules is dependent on the draw-off volume (usable volume) and the pump flow For further details see page 14
UPE2_W
Directional valve module W Poppet valve module S The poppet valve modules basically comprise of: A pressure relief module One or more control blocks One end block The design of the control is dependent on the application The number of poppet valve modules is dependent on the draw-off volume (usable volume) and the pump flow For further details see page 19
UPE2_S
6/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Module overview
Module for separate mounting Makes it possible to fit directional valves and poppet valve modules to a hydraulic system or machine For further details see page 69
ST_LOSE
Module overview
Short code GA GDB GDH GHS Short code WAE WDB WSK WSKY WZ WZP1 Short code DF30DB6 F06 F06DB F30DB F30DBU SAB4 SAB4P1 SAT2 SBAT2DB SD SDA SDB SDB6 SDBU SDP1 SDR SDRP1 SESA SESAP1 Basic module, type: G Connection module Pressure relief module Pressure maintaing module Lifting/lowering module Directional valve module, type: W Connection module with electrical unloading Pressure relief module with a valve station Cooler module Cooler module with Y - port Sandwich module Sandwich module with P1 - port Poppet valve module, type: S Pressure filter module with pressure relief valve NS6 Filter module Filter module with pressure relief valve Filter module with pressure relief valve Filter module with pressure relief valve and circulation valve Module SAB4 Module SAB4 with P1 - port Module SAT2 Module SAT2 with pressure relief module Module with pressure switch Pressure sequence module (see characteristic curves on page 84, application range for flows q 2 l/min) Pressure relief module Pressure relief module NS6 Pressure relief module with circulation valve Module with pressure switch and P1 - port Pressure reducing module Pressure reducing module with P1 - port End module with accumulator and isolator valve End module with accumulator, isolator valve and P1 - port (P - line pmax = 250 bar) (flow qvmax = 6 l/min) (flow qvmax = 6 l/min) (T - line pmax = 7 bar) (T - line pmax = 7 bar) Page 9 10 12 11 Page 15 16 17 17 18 18 Page 24 20 21 22 23 49 50 36 40 54 28 25 26 27 54 31 31 64 65
RE 51144/09.05
IH15A
7/88
Module overview
Short code SP SPA2 SPA3 SPA3P1 SPAT2 SPAT2DB SPAT3DB SPBAT2DB SPDB SPDR SPP1 SR SSB SSBP1 SU SUA SUAP1 SUP1 SZP1 WSE WSED WSEDA WSEDAP1 WSEDP1 WSEP1 Short code A ADB E EP1 Z ZP1 Short code RBAIH15A RIH15AR Short code SDRG SPA2G SPA3G Poppet valve module, type: S Module SP Module SPA2 Module SPA3 Module SPA3 with P1 - port Module SPAT2 Module SPAT2 with pressure relief valve Module SBPAT3 with pressure relief valve Module SPBAT2 with pressure relief valve Module with proportional pressure relief valve Module with proportional pressure reducing valve Module P with P1 - port Module with check valve Accumulator saftey module Accumulator saftey module with P1 - port Circulation module Circulation module with isolator valve Circulation module with isolator valve and P1 - port Circulation module with P1 - port Sandwich module with P1 - port blocked Directional poppet valve module End module with pressure switch End module with pressure switch and isolator valve End module with pressure switch, isolator valve and P1 - port End module with pressure switch and P1 - port End module with P1 - port Module for separate mounting Connection module Connection module with pressure relief valve End module End module with P1 - port Sandwich module Sandwich module with P1 - port Reducing module, type: R Reservoir connection module with reducer to suit IH15A Reducer module IH15B on IH15A (right) Module with threads for line mounting Pressure reducing module with threaded connections Module SPA2 with thread connection Module SPA3 with thread connection Page 34 35 44 45 37 39 47 42 29 30 34 52 67 67 33 32 32 33 56 57 58 61 62 59 57 Page 70 71 73 73 72 72 Page 74 74 Page 75 76 77
8/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
RE 51144/09.05
IH15A
9/88
29 39
Material No.
Type code
26
IH15MA-1X/GAIH15MA-1X/GA-V
26
Seal
Seal material
=V
10/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Dim. Z = 30 mm
P M 22,5 54,5 X
58,5 109
Material No.
Grub screw with internal hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 350 bar 500 bar
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
14
Pressure monitoring
26
With NS63 pressure gauge With test point Without pressure monitoring Seal material FKM
Seal
=V
RE 51144/09.05
IH15A
11/88
P P T
22,5
55,5
Material No.
Type code
1 2 14 4 8 26
Grub screw with internal hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 350 bar 500 bar
166,5
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
4
Normally closed Normally open Volt With pressure gauge NG63 With test point With pressure monitoring Seal material FKM 24 V DC
= G24 =D =M =O =V
Pressure monitoring
26
Seal
12/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
P P T T
T 166,5 HED5 55,5 22,5 M A 4,5 41,5 58,5 148 X Dim. Z = 45 mm Y M 22,5 55,5 A 8,5 42,5 148 198 X 175 HED8
RE 51144/09.05
IH15A
13/88
Grub screw with internal hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 350 bar 500 bar
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
4
Normally closed Normally open Volt Without pressure switch HED 5 OP1X/K14 HED 8 OP1X/K14 With NS63 pressure gauge With test point Without pressure monitoring Seal material FKM 24 V DC
Pressure switch
14
Pressure monitoring
26
Seal
14/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
RE 51144/09.05
IH15A
15/88
Y P b T P T 150 201,5
Material No. Component description Connection module with electrical unloading R904100245 R900992207 Type code
1 2 4 8 26
a
49,5
IH15EA-1X/WAEIH15EA-1X/WAE-S350/NG24/V IH15EA-1X/WAE-S350/PG24/V
Grub screw with internal hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 350 bar 500 bar
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
4
= G24 =V
Seal
16/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Dim. Z = 50 mm Y
T G1/4 A B G1/4
T P A B T
X total
B 51,5
P A B T
19,5
36,5
A a P
B b T
45,5 58,5 109 Component description Pressure relief module with a valve station Type code
1 2 14 26
Material No.
Grub screw with internal hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 350 bar 500 bar
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
14
See page 79
Pressure monitoring
26
With NS63 pressure gauge With test point Without pressure monitoring Seal material FKM
Seal
RE 51144/09.05
IH15A
17/88
58,5 70 P T T Material No. TK Component description Cooler module R904100535 Type code
26
IH15EA-1X/WSKIH15EA-1X/WSK-V
26
Seal
Seal material
FKM
=V
Cooler module with Y - port, type WSKY Symbol Unit dimensions Y TK T 17,5 36,5 49,5 Dim. Z = 45 mm
58,5 Y P T T Material No. TK Component description Cooler module with Y - port R901107072 Type code
26
70
IH15EA-1X/WSKYIH15EA-1X/WSKY-V
26
Seal
Seal material
FKM
=V
18/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
P T P A B T
58,5 70
Sandwich module with P1-port, type WZP1 Symbol A G1/4 B G1/4 A 42 55 Unit dimensions Y Dim. Z = 45 mm
58,5 70
26
IH15EA-1X/WZIH15EA-1X/WZ-V
R900991532 Material No. Component description Sandwich module with P1 - port R904100110
Type code
26
IH15EA-1X/WZP1IH15EA-1X/WZP1-V
26
Seal
Seal material
13
13
FKM
=V
RE 51144/09.05
IH15A
19/88
20/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
40 119 P T Spare part: Filter element, see page 87 Material No. Component description Filter module R900260940 R900242844 R900992204 Type code
19 20 26
19
Filter rating
20
06 m 10 m Without clogging indicator Optical clogging indicator Electrical clogging indicator Seal material FKM
50
= 06 = 10 =A =O =E =V
Clogging indicator
26
Seal
RE 51144/09.05
IH15A
21/88
Unit dimensions
Y
Dim. Z = 55 mm
22,5
74,5
104,5
X
26
58,5
P T
118,9 150
Spare part: Filter element, see page 87 Material No. Component description Filter module with pressure relief valve R900993488 R900702053 R904100676 Type code
1 2 19 20
Grub screw with internal hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 350 bar 500 bar
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
19
Filter rating
20
06 m 10 m Without clogging indicator Optical clogging indicator Electrical clogging indicator Seal material FKM
= 06 = 10 =A =O =E =V
Clogging indicator
26
Seal
22/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Unit dimensions
Y T
Dim. Z = 140 mm
22,5
88,5
P T
114,5
X
26
Spare part: Filter element, see page 87 Assembly tool: Strap wrench, Material No. R904001048 Material No. Component description Filter module with pressure relief valve R901099541 R901099029 R904100109 Type code
1 2 19 20
Grub screw with hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 350 bar 500 bar
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
19
Filter rating
20
06 m 10 m Without clogging indicator Optical clogging indicator Electrical clogging indicator Seal material FKM
= 06 = 10 =A =O =E =V
Clogging indicator
26
Seal
RE 51144/09.05
IH15A
23/88
Unit dimensions
Y
Dim. Z = 140 mm
119,5
P T
Spare part: Filter element, see page 87 Assembly tool: strap wrench, Material No. R904001048 Component description Filter module with pressure relief valve and circulation valve Type code
1 2 4 19 20 26
Material No.
Grub screw with internal hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 350 bar 500 bar
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
4
Normally closed Normally open Volt 24 V DC 06 m 10 m Without clogging indicator Optical clogging indicator Electrical clogging indicator Seal material FKM
= G24 = 06 = 10 =A =O =E =V
Filter rating
20
Clogging indicator
26
Seal
24/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
P 119,5
X P T 100 172 Spare part: Filter element, see page 87 Material No. Component description Pressure filter module with pressure relief valve NS6 R901099527 R901099528 R901099524 Type code
1 2 19 20 26
58,5
Grub screw with internal hexagon and protective cap Rotary knob Lockable rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 315 bar
45,5
87,5
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 6../..E Design tested in accordance with the pressure component directive 97/23/EC
19
Filter ratings
20
10 m Without clogging indicator Optical clogging indicator Electrical clogging indicator Seal material FKM
= 10 =A =O =E =V
Clogging indicator
26
Seal
RE 51144/09.05
IH15A
25/88
58,5 P T P T 109
Material No.
Type code
1 2 26
Grub screw with internal hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 350 bar 500 bar
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
26
Seal
Seal material
FKM
=V
26/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
P T
Material No.
Type code
1 2 26
Grub screw with internal hexagon and protective cap Rotary knob Lockable rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 315 bar
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 6../..E Design tested in accordance with the pressure component directive 97/23/EC
26
Seal
Seal material
FKM
RE 51144/09.05
IH15A
27/88
Unit dimensions Y
Dim. Z = 45 mm
79,5 X
162 b P T Material No. Component description Pressure relief module with circulation valve R901099615 R904101274 Type code
1 2 4 8
IH15EA-1X/SDBUIH15EA-1X/SDBU-S350/NG24/V IH15EA-1X/SDBU-S350/PG24/V
Grub screw with internal hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 350 bar 500 bar
22,5
58,5 70
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
4
= G24 =V
Seal
28/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
41,5
74,5 X
26
Material No.
Type code
23 24 25 14
14
Pressure monitoring
23
With pressure gauge NS63 With test point Without pressure monitoring Rotary knob Sleeve with hexagon and protective cap Lockable rotary knob with scale Rotary knob with scale Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Switching pressure differential Switching pressure differential Seal material 50 bar 100 bar 200 bar 315 bar 10% 17% FKM
24
25
Seal
RE 51144/09.05
IH15A
29/88
58,5 70 132
P T Material No. Component description Proportional pressure relief module R904101391 R900993538 Type code
24 8 26
IH15EA-1X/SPDBIH15EA-1X/SPDB-100G24/V IH15EA-1X/SPDB-315G24/V
Volt Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Seal material
35
26
Seal
30/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
58,5 70 169
P T Material No. Component description Proportional pressure reducing module R904101209 Type code
24 14 8 26
IH15EA-1X/SPDRIH15EA-1X/SPDR-315/DG24/V
Volt With pressure gauge NS63 With test point Without pressure monitoring Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Seal maerial
24 V DC
35
= G24 =D =M =O 50 bar 100 bar 200 bar 315 bar FKM = 50 = 100 = 200 = 315 =V Pressure monitoring
24
26
Seal
RE 51144/09.05
IH15A
31/88
75,5 176,5
P T
P1 P T
Material No.
Type code
16 17 14 26
R904101712 R904100719 R904102202 Material No. Component description Pressure reducing module with P1 - port R904100561 R904100659 R901099714
14
Type code
16 17 14 26
IH15EA-1X/SDRP1IH15EA-1X/SDRP1-2/210/D/V IH15EA-1X/SDRP1-2/210/M/V IH15EA-1X/SDRP1-2/210/O/V With pressure gauge NS63 With test point Without pressure monitoring Grub screw with internal hexagon and protective cap Max. secondary pressure Max. secondary pressure Max. secondary pressure Max. secondary pressure Seal material 25 bar 75 bar 150 bar 210 bar FKM =D =M =O =2 = 25 = 75 = 150 = 210 =V
Pressure monitoring
16
Adjustment element
17
Secondary prressure
26
Seal
22,5
45
32/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
58,5 112,5
P T
Circulation module with isolator valve and P1 - port, type SUAP1 Symbol
P1 P T
Material No.
Type code
26
IH15EA-1X/SUAIH15EA-1X/SUA-V
R900992137 Material No. Component desciption Circulation module with isolator valve and P1 - port R901099721
Type code
26
IH15EA-1X/SUAP1IH15EA-1X/SUAP1-V
26
Seal
Seal material
40
FKM
=V
RE 51144/09.05
IH15A
33/88
Dim. Z = 45 mm
IH15EA-1X/SUP1IH15EA-1X/SUP1-PG24/350/V
Normally closed Normally open pmax pmax Volt Seal material = 350 bar = 500 bar 24 V DC FKM
Seal
34/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Dim. Z = 45 mm
IH15EA-1X/SPP1IH15EA-1X/SPP1-PG24/350/V
Normally closed Normally open pmax pmax Volt Seal material = 350 bar = 500 bar 24 V DC FKM
Seal
RE 51144/09.05
IH15A
35/88
Dim. Z = 45 mm
Type code
4 10 12 8 7 26
IH15EA-1X/SPA2IH15EA-1X/SPA2-N/G24/350/V IH15EA-1X/SPA2-N/G24/500/V IH15EA-1X/SPA2-NHED5/100G24/V IH15EA-1X/SPA2-P/G24/350/V IH15EA-1X/SPA2-P/G24/500/V IH15EA-1X/SPA2-PHED5/210G24V Normally closed Normally open pmax pmax Volt Without pressure switch HED 5 OP1X/K14 Without pressure switch Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Seal material 50 bar 100 bar 210 bar 350 bar 630 bar FKM = 350 bar = 500 bar 24 V DC =N =P = 350 1) = 500 1) = G24 = No code = HED 5 = No code = 50 = 100 = 210 = 350 = 630 =V
Pressure switch
12
26
Seal
1)
Details are only required, when the module does not have any pressure switches fitted.
40
36/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Unit dimensions Y A
Dim. Z = 45 mm
a 162 P T
43,5 58,5
P T
Material No.
Type code
4 8 7
Normally closed Normally open pmax pmax Volt Seal material = 350 bar = 500 bar 24 V DC FKM
14
Seal
RE 51144/09.05
IH15A
37/88
P T
240 M A G1/4 G1/4 2 1 a 2 a 43 1 M 13 P T P T 25,5 P T b b 43,5 272 168,5 Y 2 A HED8 M 13 25,5 43,5 Y 136,5
13 HED5
43
80 80
43
38/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Normally closed Normally open pmax pmax Volt Without pressure switch HED 5 OP1X/K14 HED 8 OP1X/K15 Without pressure switch Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure With pressure gauge NS63 With test point Without pressure monitoring Seal material FKM 50 bar 100 bar 200 bar 210 bar 350 bar 630 bar = 350 bar = 500 bar 24 V DC
=N =P = 350 1) = 500 1) = G24 = No code = HED5 = HED8 = No code = 50 = 100 = 200 2) = 210 3) = 350 = 630 =D =M =O =V
Pressure switch
12
14
Pressure monitoring
26
Seal
1)
Details are only required, when the module does not have any pressure switches fitted. Only valid for HED 8 Only valid for HED 5
2) 3)
RE 51144/09.05
IH15A
39/88
Unit dimensions Y
Dim. Z = 45 mm
A 80 IH15EA-1X/SPAT2DBIH15EA-1X/SPAT2DB-S 50/MPG24/V IH15EA-1X/SPAT2DB-S100/MNG24/V IH15EA-1X/SPAT2DB-S200/OPG24/V Grub screw with internal hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 350 bar 500 bar 43 =S =H = 50 = 100 = 200 = 350 = 500 210 bar 250 bar 400 bar 500 bar = 210E = 250E = 400E = 500E See page 79 =N =P 24 V DC = G24 =D =M =O FKM =V M Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Normally closed Normally open Volt With pressure gauge NS63 With test point Without pressure monitoring Seal material
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request!
Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
4
Pressure monitoring
26
Seal
40/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
RE 51144/09.05
IH15A
41/88
IH15EA-1X/SBAT2DBIH15EA-1X/SBAT2DB-S100/N/G24/V IH15EA-1X/SBAT2DB-S200/P/HED5G24/V
Grub screw with internal hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 350 bar 500 bar
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
4
stromlos geschlossen stromlos offen Volt Without pressure switch HED 5 OP1X/K14 Seal material FKM 24 V DC
Pressure switch
26
Seal
42/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
RE 51144/09.05
IH15A
43/88
Grub screw with internal hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 350 bar 500 bar
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
4
Normally closed Normally open Volt Without pressure switch HED 5 OP1X/K14 Seal material FKM 24 V DC
Pressure switch
26
Seal
44/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
A G1/4 G1/4
Y A HED5 M 13 70
P T P T b
49
RE 51144/09.05
IH15A
45/88
P T P1 P T b
A G1/4 G1/4 a
P T P1 P T b
46/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
A =U P A =C P T = 350 bar = 500 bar 24 V DC = 350 1) = 500 1) = G24 = No code = HED 5 = HED 8 50 bar 100 bar 200 bar 210 bar 350 bar 630 bar = No code = 50 = 100 = 200 2) = 210 3) = 350 = 630 =D =M =O FKM =V T
pmax pmax Volt Without pressure switch HED 5 OP1X/K14 HED 8 OP1X/K15 Without pressure switch Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure With pressure gauge NS63 With test point Without pressure monitoring Seal material
Pressure switch
12
14
Pressure monitoring
26
Seal
1)
Details are only required, when the module does not have any pressure switches fitted. Only valid for HED 8 Only valid for HED 5
2) 3)
RE 51144/09.05
IH15A
47/88
Y M A G1/4 G1/4 A HED5 85 a M A P T 25,5 T P T b 240 43,5 136,5 13 P Y A HED8 85 M 13 25,5 43,5 58,5 162 270 56 56
48/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Grub screw with internal hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. 50 bar 100 bar 200 bar 350 bar 500 bar
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
5
Volt Without pressure switch HED 5 OP1X/K14 HED 8 OP1X/K15 With pressure gauge NS63 With test point Without pressure monitoring Seal material
Pressure switch
14
Pressure monitoring
26
Seal
RE 51144/09.05
IH15A
49/88
A a P P T
B b Ta+b
A G1/4
HED8 A a b P P T Ta+b 1,5 162,5 266 A G1/4 B G1/4 b 68 85 Y B 17 A a 1,5 P T 69 172,5 Y A G1/4 B G1/4 b HED8 A a b P P T Ta+b 1,5 162,5 266 17 HED8 68 85 A a B B 17 b P Ta+b HED8 68 85 A a B A a B
50/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
A a P P1 P T
B b Ta+b
A G1/4
B G1/4
A a P P1 P T A G1/4
B b Ta+b
B G1/4
A a P P1 P T
B b Ta+b
A G1/4
B G1/4
A a P P1 P T
B b Ta+b
RE 51144/09.05
IH15A
51/88
B b =K
P A a P
7
T B
a+b
b T a+b = 350 bar = 500 bar 24 V DC 50 bar 100 bar 200 bar 210 bar 350 bar 630 bar
=L
pmax pmax Volt Without pressure swicth Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Without pressure switch A B A and B Seal material
= 350 1) = 500 1) = G24 = No code = 50 = 100 = 200 2) = 210 3) = 350 = 630 = No code =A =B = AB
13
26
Seal
1)
FKM
=V
Details are only required when the module does not have any pressure switches fitted. Only valid for HED 8 Only valid for HED 5
2) 3)
52/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
43,5 58,5 70
P T
P T
P T
G1/4
G1/4
G1/4
Y 45 M
HED5
RE 51144/09.05
IH15A
53/88
10
Pressure switch
12
Without pressure switch HED 5 OP1X/K14 HED 8 OP1X/K15 Without pressue switch Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure With pressure gauge NS63 With test point Without pressure monitoring Without pressure monitoring Display range Display range Display range Display range Display range In port P In port T In ports P and T Seal material FKM 60 bar 100 bar 250 bar 400 bar 600 bar 50 bar 100 bar 200 bar 210 bar 350 bar 630 bar
= No code = HED 5 = HED 8 = No code = 50 = 100 = 200 2) = 210 3) = 350 = 630 =D =M =O = No code = 60 1) = 100 1) = 250 1) = 400 1) = 600 1) =P =T = PT =V
14
Pressure monitoring
15
21
Check valve
26
Seal
1)
Details are only required when the module does not have any pressure switches fitted. Only valid for HED 8 Only valid for HED 5
2) 3)
54/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
G1/4
P1 P T
RE 51144/09.05
IH15A
55/88
IH15MA-1X/SDIH15MA-1X/SD-0/D100/V IH15MA-1X/SD-1HED5/100/D/V IH15MA-1X/SD-1HED5/210/D/V IH15MA-1X/SD-1HED5/210/M/V IH15MA-1X/SD-1HED5/210/O/V IH15MA-1X/SD-1HED8/200/D/V IH15MA-1X/SD-2HED5/210/D/V IH15MA-1X/SD-2HED5/210/O/V IH15MA-1X/SD-2HED8/200/O/V Type code
9 11 12 14 15 26
IH15MA-1X/SDP1IH15MA-1X/SDP1-1HED5/100/D/V
Without pressure switch One pressure switch Two pressure switches Without pressure switch HED 5 OP1X/K14 HED 8 OP1X/K15 Without pressure switch Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure With pressure gauge NS63 With test point Without pressure monitoring Without pressure monitoring Display range Display range Display range Display range Display range Seal material 60 bar 100 bar 250 bar 400 bar 600 bar FKM 50 bar 100 bar 200 bar 210 bar 350 bar 630 bar
=0 =1 =2 = No code = HED 5 = HED 8 = No code = 50 = 100 = 200 2) = 210 3) = 350 = 630 =D =M =O = No code = 60 1) = 100 1) = 250 1) = 400 1) = 600 1) =V
Pressure switch
12
14
Pressure monitoring
15
26
Seal
1)
Details are only required when the modul does not have any pressure switches fitted. Only valid for HED 8 Only valid for HED 5
2) 3)
56/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
58,5 70
P1 P T Material No. Component description Sandwich modul with P1 - port blocked R901103710 Type code
26
IH15MA-1X/SZP1IH15MA-1X/SZP1-V
26
Seal
Seal material
FKM
=V
RE 51144/09.05
IH15A
57/88
58,5 70
P1 P T
P1 P T T G1/4
Material No.
Type code
22 26
IH15MA-1X/WSEIH15MA-1X/WSE-PT/V IH15MA-1X/WSE-V
R900334850 R900992158 Material No. Component description End module with P1 - port R904101255
Type code
22 26
IH15MA-1X/WSEP1IH15MA-1X/WSEP1-V
22
Ports
26
Seal
30 = No code = PT =V
58/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
136,5
P T
P T
P T
P T
136,5 226
40
HED5
HED5
136,5
153,5
HED8
HED8
RE 51144/09.05
IH15A
59/88
G1/4
P1 P T
P1 P T
G1/4
P1 P T
P1 P T
P1 P T
60/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
IH15MA-1X/WSEDIH15MA-1X/WSED-0/D100/V IH15MA-1X/WSED-0/D250/V IH15MA-1X/WSED-0/D400/V IH15MA-1X/WSED-0/D600/V IH15MA-1X/WSED-1HED5/350/D/V IH15MA-1X/WSED-1HED5/350/O/V IH15MA-1X/WSED-1HED8/350/D/V IH15MA-1X/WSED-1HED8/350/O/V IH15MA-1X/WSED-2HED5/350/D/V IH15MA-1X/WSED-2HED8/350/D/V Type code
9 11 12 14 15 26
IH15MA-1X/WSEDP1IH15MA-1X/WSEDP1-0/D/400/V IH15MA-1X/WSEDP1-2HED5/210/D/V
Without pressure switch One pressure switch Two pressure switches Without pressure switch HED 5 OP1X/K14 HED 8 OP1X/K15 Without pressure switch Display range Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure With pressure gauge NS63 With test point Without pressure monitoring Without pressure monitoring Display range Display range Display range Display range Display range Seal material 60 bar 100 bar 250 bar 400 bar 600 bar FKM 50 bar 100 bar 200 bar 210 bar 350 bar 630 bar
=0 =1 =2 = No code = HED 5 = HED 8 = No code = 50 = 100 = 200 2) = 210 3) = 350 = 630 =D =M =O = No code = 60 1) = 100 1) = 250 1) = 400 1) = 600 1) =V
Pressure switch
12
14
Pressure monitoring
15
26
Seal
1)
Details are only required with the modul does not have any pressure switches fitted. Only valid for HED 8 Only valid for HED 5
2) 3)
RE 51144/09.05
IH15A
61/88
141,5
P T
P T
P T
P T
40
163,5
141,5
163,5
62/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
G1/4
P1 P T
P1 P T
G1/4
P1 P T
P1 P T
P1 P T
RE 51144/09.05
IH15A
63/88
IH15MA-1X/WSEDAIH15MA-1X/WSEDA-0/D/100/V IH15MA-1X/WSEDA-0/D/400/V IH15MA-1X/WSEDA-1HED5/100/D/V IH15MA-1X/WSEDA-1HED5/210/D/V IH15MA-1X/WSEDA-1HED5/210/O/V IH15MA-1X/WSEDA-1HED8/200/O/V IH15MA-1X/WSEDA-1HED8/350/D/V IH15MA-1X/WSEDA-2HED5/210/D/V IH15MA-1X/WSEDA-2HED8/200/D/V Type code
9 11 12 14 15 26
IH15MA-1X/WSEDAP1IH15MA-1X/WSEDAP1-0/D/400/V IH15MA-1X/WSEDA-2HED5/210/D/V
Without pressure switch One pressure switch Two pressure switches Without pressure switch HED 5 OP1X/K14 HED 8 OP1X/K15 Without pressure switch Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure With pressure gauge NS63 With test point Without pressure monitoring Without pressure monitoring Display range Display range Display range Display range Display range Seal material 60 bar 100 bar 250 bar 400 bar 600 bar FKM 50 bar 100 bar 200 bar 210 bar 350 bar 630 bar
=0 =1 =2 = No code = HED 5 = HED 8 = No code = 50 = 100 = 200 2) = 210 3) = 350 = 630 =D =M =O = No code = 60 1) = 100 1) = 250 1) = 400 1) = 600 1) =V
Pressure switch
12
14
Pressure monitoring
15
26
Seal
1)
Details are only required when the modul does not have any pressrue switches fitted. Only valid for HED 8 Only valid for HED 5
2) 3)
64/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
P T 193,5
58,5 93
40
max. 177
P T 226
136,5
40
max. 177
RE 51144/09.05
IH15A
65/88
P1 P T
P1 P T
66/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
IH15MA-1X/SESAP1IH15MA-1X/SESAP1-1HED5/100/0,32/V IH15MA-1X/SESAP1-2HED5/350/0,50/V
Without pressure switch One pressure switch Two pressure switches Without pressure switch HED 5 OP1X/K14 HED 8 OP1X/K15 Without pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Nom. flow in L without accumulator 0,075 0,10 0,16 0,32 0,50 Seal material 50 bar 100 bar 200 bar 210 bar 350 bar 630 bar Max. pressure in bar 250 500 250 210 400 FKM
=0 =1 =2 = No code = HED 5 = HED 8 = No code = 50 = 100 = 200 2) = 210 3) = 350 = 630 = No code = 0,075 = 0,10 = 0,16 = 0,32 = 0,50 =V
Pressure switch
12
18
Membrane accumulator
Bladder accumulator
26
Seal
2) 3)
RE 51144/09.05
IH15A
67/88
G1/4
1 2 1
P T 65
P T
50,5
93
G1/4
2 1
P P1 P T T
max. 192
68/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
IH15MA-1X/SSBP1IH15MA-1X/SSBP1-S210E/O/0,32/V
=S =H
Pressure stage of the design tested pressure relief valve to directive 97/23/EC (pressure component directive) Further pressue stage on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC 210 bar 250 bar 400 bar 500 bar = 210E = 250E = 400E = 500E See page 79 =D =M =O = No code = 0,075 = 0,10 = 0,16 = 0,32 = 0,50 FKM =V
14
Pressure monitoring
18
With pressure gauge NS63 With test point Without pressure monitoring Nom. flow in L without accumulator 0,075 0,10 0,16 0,32 0,50 Seal material Max. pressure in bar 250 500 250 210 400
Membrane accumulator
Bladder accumulator
26
Seal
RE 51144/09.05
IH15A
69/88
2
M M a P P T T P b T P b A a T P T b M a A P b A a T P b A B a
4
A M a T P T P b T P b P T A a T
1
A a P P T b T P b A a T P b a T P b A a T P b a T A A B P T B
3
B a P T b P T P T A
1 Connection module type A (see page 70) 2 Connection module with pressure relief valve type ADB (see page 71) 3 End module type E (see page 73)
4 Sandwich module type Z (page 72) The sandwich module can be combined with the connection module Pos. 1 or with the end module Pos. 3. The length dimension is obtained by the addition of dim. X of the directional valve modules (see pages 17 to 18) and the poppe valve modules (see pages 29 to 68).
70/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
T 90 G1/4 P T G1/4 10 Material No. Component description Connection module R900993200 Type code
26
65
P 25 6,8 12 22 FKM M8
IH15MA-1X/AIH15MA-1X/A-V
26
Seal
Seal material
10
=V
RE 51144/09.05
IH15A
71/88
109
M8
70
T P 13 13 32 45 54 =S =H 50 bar 100 bar 200 bar 350 bar 500 bar = 50 = 100 = 200 = 350 = 500 = 210E = 250E = 400E = 500E See page 79 =D =M =O FKM =V
P M G1/4 P T G1/4 T 5 14 40
Material No.
Type code
1 2 14 26
Grub screw with internal hexagon Rotary knob Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max.
Pressure stage of the design tested pressrue relief valve to directive 97/23/EC (pressure component directive) further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC
14
35
Pressure monitoring
26
With pressrue gauge NS63 With test point Without pressure monitoring Seal material
Seal
72/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
90
P T
10
10
12 22
P1 P T
Material No.
Type code
26
IH15MA-1X/ZIH15MA-1X/Z-V
R900992147 Material No. Component description Sandwich module with P1 - port R904100358
Type code
26
IH15MA-1X/ZP1IH15MA-1X/ZP1-V
26
Seal
Seal material
FKM
6,8
M8
=V
RE 51144/09.05
IH15A
73/88
90
P T
10
10
12 22
P1 P T
Material no.
Type code
26
IH15MA-1X/EIH15MA-1X/E-V
R900993201 Material No. Component description End module with P1 - port R900262117
Type code
26
IH15MA-1X/EP1IH15MA-1X/EP1-V
26
Seal
Seal material
FKM
6,8
M8
=V
74/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Seal material
FKM
69 85
=V
Unit dimensions
Y(UPE2)
Y 20 40
Dim. Z = 70 mm X
Z(UPE2)
105 81,5 23
Y Z 12,5 70
P T
... 45
Y(UPE2) 70 Material No. Component description Reducing module IH15B to IH15A R904101836
26
Type code
27 26
IH15MA-1X/RIH15ARIH15MA-1X/RIH15AR-V
Seal
27
Throttle
RE 51144/09.05
IH15A
75/88
Module with threaded connections, for line mounting (nominal dimensions in mm)
Pressure reducing module with threaded connections, type SDRG Symbol M T P 36 50 M 20,5 Unit dimensions P1 Dim. Z = 65 mm
G1/4
20,5
14,3
33,8
5,3 65,3 Material No. Component description Pressure reducing module R901105958 R901105959 R901105960 Type code
16 17 14 26
14
Pressure monitoring
16
Pressrue monitoring with pressure gauge NS63 With test point With pressure monitoring Grub screw with internal hexagon and protective cap Max. secondary pressure 25 bar Max. secondary pressure 75 bar Max. secondary pressure 150 bar Max. secondary pressure 210 bar Seal material FKM
10
55
=D =M =O =2 = 25 = 75 = 150 = 210 =V
Adjustment element
17
Secondary pressure
26
Seal
76/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Module with threaded connections, for line mounting (nominal dimensions in mm)
Module SPA2 with threaded connections, typeSPA2G Symbol Unit dimensions Dim. Z = 55 mm
2x 6,6
IH15EA-1X/SPA2GIH15EA-1X/SPA2G-NG24/350/V
Normally closed Normally open pmax pmax Volt Seal material = 350 bar = 500 bar 24 V DC FKM
7,5
Seal
RE 51144/09.05
IH15A
77/88
Module with threaded connections, for line mounting (nominal dimensions in mm)
Module P A with threaded connections, type SPA3G Symbol Unit dimensions Dim. Z = 55 mm
a 3
55
1 20 40
2 20 32
P T G1/4 1 2 G1/4 b
A G1/4 3 162
12,5 56 70
2x 6,6
IH15EA-1X/SPA3GIH15EA-1X/SPA3G-CG24/350/V
47,5
7,5
55
Seal
78/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Grub screw with internal hexagon Y =S 50,5 Rotary knob Y =H 67,5 Grub screw with hexagon and protective cap 34
=S
72 Rotary knob
60
=H
83
=A
28
2
11
83 50 bar 100 bar 200 bar 350 bar 500 bar = 50 = 100 = 200 = 350 = 500
Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max.
Pressure stage of the design tested pressure relief valve to directive NG4 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC 140 bar 210 bar 250 bar 330 bar 400 bar 500 bar = 140E = 210E = 250E = 330E = 400E = 500E See page 79
RE 51144/09.05
IH15A
79/88
Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max.
25 bar 50 bar 100 bar 200 bar 315 bar 400 bar
Pressure stage of the design tested pressure relief valve NS6 to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Kennlinie fr baumustergeprfte Druckbegrenzungsventile Typ: DBD 6../..E Baumusterprfung nach Druckgerte-Richtlinie 97/23/EG
3
Pressure stage of the design tested pressure relief valve NS4 to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 4../..E Design tested in accordance with the pressure component directive 97/23/EC NS4 Operating pressure in bar 500 400 315 300 200 100 60 5 (10) (17) 140 bar 210 bar 250 bar 330 bar 400 bar 500 bar = 140E = 210E = 250E = 330E = 400E = 500E
Values which are below the characteristic curve in the dark area cannot be achieved with this valve. 10 Flow in l/min 15 20
80/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Pressure stage of the design tested pressrue relief valve NS6 to directive 97/23/EC (pressure component directive) Further pressure stages on request! Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Characteristic curve for the design tested pressure relief valve type: DBD 6../..E Design tested in accordance with the pressure component directive 97/23/EC NS6 Operating pressure in bar 400 300 200 50 bar 100 bar 140 bar 210 bar 330 bar = 50E = 100E = 140E = 210E = 330E
111 100 80 60 50 40 30 0 12
Values which are below the characteristic curve in the dark area cannot be achieved with this valve. 20 28 36 Flow in l/min 44 52
RE 51144/09.05
IH15A
81/88
A =U P A =C P T T
B b =K
P A a P
7
T B
a+b
=L
pmax pmax Volt Without pressure switch One pressure switch Two pressure switches Without pressure switch HED 5 OP1X/K14 Without pressure switch HED 5 OP1X/K14 HED 8 OP1X/K15
Pressure switch
11
Pressure switch
1)
Details are only required when the module does not have any pressure switches fitted. Only valid for HED 5
3)
82/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Without pressure switch Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Max. settable pressure Without pressure switch A B A and B With pressure gauge NS63 With test point Without pressure monitoring Without pressure monitoring Display range Display range Display range Display range Display range
50 bar 100 bar 200 bar 210 bar 350 bar 630 bar
13
14
Pressure monitoring
15
= No code = 60 1) = 100 1) = 250 1) = 400 1) = 600 1) =1 =2 =3 =7 = 25 = 75 = 150 = 210 = 315 = No code = 0,075 = 0,10 = 0,16 = 0,32 = 0,50
16
Adjustment element
Rotary knob Grub screw with hexagon and protective cap Lockable rotary knob with scale Rotary knob with scale Max. secondary pressure Max. secondary pressure Max. secondary pressure Max. secondary pressure Max. secondary pressure Nom. flow in L without accumulator 0,075 0,10 0,16 0,32 0,50 25 bar 75 bar 150 bar 210 bar 315 bar
17
Secondary pressure
18
Membrane accumulator
Bladder accumulator
1)
Details are only required when the module does not have any pressrue switches fitted. Only valid for HED 8 Only valid for HED 5
2) 3)
RE 51144/09.05
IH15A
83/88
Filter rating
20
= 06 4) = 10 =A
Clogging indicator
=O
36,5
=E
72
Electrical clogging indicator technical data Maximum voltage Switching capacity Protection with protective cap Contact type Pin allocation V VA 42 100 IP 65 NC
Check valve
22
Ports
4)
Not available for pressure filter module with pressure relief valve NS6, type DF30DB6.
84/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Rotary knob
Y
=1
205
=2
199
=3
254
=7
232
24
Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Pressure settable up to max. Switching pressure differential Switching pressure differential Seal material Without throttle Throttle diameter Throttle diameter
50 bar 100 bar 200 bar 315 bar 10% 17% FKM 1,0 mm 2,5 mm
25
Seal
27
Throttle
RE 51144/09.05
IH15A
85/88
20
20
16
16
12
12
8 30
50
8 50
100
20
20
16
16
12
12
8 100
200 210
8 200
320
86/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
AB COC
Power units/ manifolds Customer orientated controls = COC Branch orientated controls = BOC Component type IH15A Customer or branch name e.g. Examples or presses
IH15A
MUSTER SCHUTZGITTER
06 AA 07
Consecutive number e.g. Number 7
07 =
Variant identification Depicts the component variations fitted Valve NS Function description (to customer or branch description) e.g. Clamping Small hatch Revolver Guard grill
IH 15
Industrial hydraulics Module series 15 Assembly from module series Nominal size Nom. size A qV to 30 l/min NS of the largest valve NS6
=A
Electrical connection type Built-on components Version Hand override built-on components Valve voltage E.g. 24 V DC 220 V AC Variant identification Depicts the component variations fitted Consecutive number E.g. Number 24
= 006
Component series 10 to 19 = 1X 10 to 19 unchanged installation and connection dimensions No. of modules E.g. 7 Modules
G24 = W220 = = 07
Example: IH15BA006-1X/07024AA/W220N9K4M01 Nominal size A IH15B assembly up to 14 l/min. with NS6 valves, 7 modules, consecutive n. 24, variant AA, 220 V AC, N9 hand override, K4 connection type, seal material Perbunan, connection type with pipe threads to ISO 228 part 1 024 =
RE 51144/09.05
IH15A
87/88
Accessories
Filter element Material No. R901039452 R900992672 R904001261 R904001262 R904500023 Module F06 F06 F30 F30 DF30 Designation Filter element Filter element Filter cartridge Filter cartridge Filter element NS 06 06 30 30 30 Material FKM FKM FKM FKM FKM Filter rating 06 m 10 m 06 m 10 m 10 m
Assembly tool for a filter catridge Strap wrench, Material No.: R904001048
Dimension details: Reservoir cut-out for module RBAIH15A (nominal dimensions in mm)
1240,3 M8 (3x)
20
280,3
10 80 R5
690,3
50
88/88
Bosch Rexroth AG
Hydraulics
IH15A
RE 51144/09.05
Notes
Bosch Rexroth AG Hydraulics Zum Eisengieer 1 97816 Lohr am Main, Germany Telefon +49 (0) 93 52 / 18-0 Telefax +49 (0) 93 52 / 18-23 58 documentation@boschrexroth.de www.boschrexroth.de
This document, as well as the data, specifications and other informations set forth in it, are the exclusive property of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties. The data specified above only serves to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The details stated do not release you from the responsibility for carrying out your own assessment and verification. It must be remembered that our products are subject to a natural process of wear and ageing.