Sei sulla pagina 1di 71

ATM Transport RAN13.

Feature Parameter Description

Issue Date

01 2011-03-30

HUAWEI TECHNOLOGIES CO., LTD.

Copyright Huawei Technologies Co., Ltd. 2011. All rights reserved.


No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions


and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.


Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: Email: http://www.huawei.com support@huawei.com

WCDMA RAN ATM Transport

Contents

Contents
1 Introduction ................................................................................................................................1-1
1.1 Scope ............................................................................................................................................ 1-1 1.2 Intended Audience ........................................................................................................................ 1-1 1.3 Change History.............................................................................................................................. 1-1

2 Overview of ATM Transport ....................................................................................................2-2 3 Protocol Stacks .........................................................................................................................3-1


3.1 Iub Over ATM ................................................................................................................................ 3-1 3.1.1 Protocol Stack ....................................................................................................................... 3-1 3.1.2 Links on the Iub Interface ..................................................................................................... 3-2 3.1.3 OM IPoA Data Configuration on the Iub Interface ................................................................ 3-2 3.2 Iu-CS over ATM ............................................................................................................................. 3-3 3.2.1 Protocol Stack ....................................................................................................................... 3-3 3.2.2 Links on the Iu-CS Interface ................................................................................................. 3-4 3.2.3 Differences of the Iu-CS Interface Between R99 and R4/R5/R6/R7/R8 .............................. 3-4 3.3 Iu-PS over ATM ............................................................................................................................. 3-6 3.3.1 Protocol Stack ....................................................................................................................... 3-6 3.3.2 Links on the Iu-PS Interface ................................................................................................. 3-7 3.3.3 IPoA Data Configuration on the Iu-PS User Plane ............................................................... 3-7 3.4 Iur over ATM .................................................................................................................................. 3-8 3.4.1 Protocol Stack ....................................................................................................................... 3-8 3.4.2 Links on the Iur Interface ...................................................................................................... 3-9 3.4.3 Configuration Principles for Static Relocation Routes over Iur........................................... 3-10 3.5 ATM Transport Modes ................................................................................................................. 3-11 3.5.1 UNI Mode ........................................................................................................................... 3-11 3.5.2 Fractional Mode .................................................................................................................. 3-13 3.5.3 IMA Mode ........................................................................................................................... 3-15 3.6 Timeslot Cross Connection ......................................................................................................... 3-16 3.6.1 Principles of Timeslot Cross Connection ............................................................................ 3-16 3.6.2 Function of Timeslot Cross Connection.............................................................................. 3-17 3.7 PVC Parameters of the ATM Layer ............................................................................................. 3-18 3.7.1 VPI and VCI ........................................................................................................................ 3-18 3.7.2 Service Type ....................................................................................................................... 3-18 3.7.3 ATM Traffic Records ........................................................................................................... 3-19 3.8 AAL5 ............................................................................................................................................ 3-21 3.9 AAL2 Path ................................................................................................................................... 3-21 3.9.1 AAL2 Connections and AAL2 Path ..................................................................................... 3-21 3.9.2 AAL2 Route ........................................................................................................................ 3-22 3.10 MTP3 ......................................................................................................................................... 3-23 3.10.1 MTP3 Links ....................................................................................................................... 3-23

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

WCDMA RAN ATM Transport

Contents

3.10.2 Types of MTP3 DSPs ....................................................................................................... 3-24 3.10.3 Signaling Route Mask and Signaling Link Mask .............................................................. 3-24 3.11 IPOA PVC .................................................................................................................................. 3-25 3.12 F5 .............................................................................................................................................. 3-25

4 ATM Transmission Resources...............................................................................................4-1 5 ATM Transmission Resource Management .......................................................................5-1 6 Parameters .................................................................................................................................6-1 7 Counters ......................................................................................................................................7-1 8 Glossary ......................................................................................................................................8-1 9 Reference Documents .............................................................................................................9-1

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

ii

WCDMA RAN ATM Transport

1 Introduction

1 Introduction
1.1 Scope
This document merges the basic ATM transport principle. It describes protocol stacks, transmission resources, transmission resource management (TRM), and associated parameters.

1.2 Intended Audience


This document is intended for:

Personnel who are familiar with WCDMA basics Personnel who need to understand ATM transport Personnel who work with Huawei products

1.3 Change History


This section provides information on the changes in different document versions. There are two types of changes, which are defined as follows:

Feature change: refers to the change in the ATM transport feature. Editorial change: refers to the change in wording or the addition of the information that was not described in the earlier version.

Document Issues
The document issues are as follows:

01 (2011-03-30) Draft A (2010-12-30)

01 (2011-03-30)
This is the document for the first commercial release of RAN13.0. Compared with issue Draft A (2010-12-30) of RAN13.0, this issue optimizes the description.

Draft A (2010-12-30)
This is the draft of the document for RAN13.0. Compared with issue 01 (2010-10-15) of RAN12.0, this issue incorporates the changes described in the following table. Change Type Change Description Parameter Change None

Feature change None

Editorial change The characteristic of line coding method None of E1/T1 link is added. For details, see section Line Coding Method. The description of ATM transport modes None is optimized. For details, see 3.5 ATM Transport Modes.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

1-1

WCDMA RAN ATM Transport

2 Overview of ATM Transport

2 Overview of ATM Transport


Huawei radio access network (RAN) provides ATM-based Iub/Iu(Iu-CS and Iu-PS)/Iur interfaces and ATM TRM, such as admission control based on AAL2 path bandwidth; transmission resource mapping based on ATM QoS classes, and Iub overbooking.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

2-2

WCDMA RAN ATM Transport

3 Protocol Stacks

3 Protocol Stacks
3.1 Iub Over ATM
3.1.1 Protocol Stack
Figure 3-1 shows the protocol stack for the ATM-based Iub interface. Figure 3-1 Protocol stack for the ATM-based Iub interface

The transport network layer of the Iub interface consists of the transport network layer user plane (area A), transport network layer control plane (area B), and transport network layer user plane (area C).

Areas A, B, and C share the physical layer and ATM layer. Therefore, all links in the three areas can be carried on common physical links. Links in areas A and B are carried on SAAL links. Based on the type of carried information, the upper layer of area A is classified into the NodeB Control Port (NCP) and the Communication Control Port (CCP). Only Q.AAL2 links are carried in area B.

In area C, the user plane data is carried on AAL2 paths. The bearer at the lower layer is the ATM PVC. Under the control of Q.AAL2, AAL2 connections can be dynamically set up or released for upper-layer services. Therefore, each AAL2 path must have its corresponding controlling Q.AAL2.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-1

WCDMA RAN ATM Transport

3 Protocol Stacks

3.1.2 Links on the Iub Interface


The links on the ATM-based Iub interface are of three types: SAAL link of User-Network Interface (UNI) type, AAL2 path, and IPoA PVC. The SAAL link of UNI type is used to carry NCP, CCP, and ALCAP, as shown in Figure 3-2. Figure 3-2 Links on the Iub interface

The RINT shown in Figure 3-2 refers to ATM interface boards UOIa/UOIc, AOUa/AOUc, and AEUa.

3.1.3 OM IPoA Data Configuration on the Iub Interface


On the ATM-based Iub interface, the IPoA PVC functions as the Operation and Maintenance (OM) channel.

OM IPoA PVC on the Iub Interface


Figure 3-3 shows the IPoA PVCs from the BSC6900 to NodeBs. Figure 3-3 IPoA PVCs from the BSC6900 to NodeBs

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-2

WCDMA RAN ATM Transport

3 Protocol Stacks

The RINT shown in Figure 3-3 refers to ATM interface boards UOIa/UOIc, AOUa/AOUc, and AEUa.

Network Segments
Each IPoA PVC travels through the following network segments before reaching the NodeB:

The 80.168.3.0 segment (with network mask of 255.0.0.0) between the OM board and the ATM interface board. This network segment is set before delivery of the BSC6900. The 12.13.1.0 segment (with network mask of 255.255.255.0) between the ATM interface board and the NodeBs. When setting this network segment, you need to take field conditions into consideration.

3.2 Iu-CS over ATM


3.2.1 Protocol Stack
Figure 3-4 shows the protocol stack for the Iu-CS interface. Figure 3-4 Protocol stack for the ATM-based Iu-CS interface

The transport network layer of the Iu-CS interface consists of the following areas:

Transport network layer user plane (area A) Transport network layer control plane (area B) Transport network layer user plane (area C)

Areas A, B, and C share the physical layer and ATM layer. Therefore, all links in the three areas can be carried on common physical links.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-3

WCDMA RAN ATM Transport

3 Protocol Stacks

The MSC in an R99 network implements the functions in areas A, B, and C of the protocol stack. The MSC server and MGW in an R4/R5/R6/R7/R8 network implement their functions as follows:

The MSC server implements the functions in area A. The MGW implements the functions in areas B and C.

3.2.2 Links on the Iu-CS Interface


The Iu-CS links on the CN side are of two types: MTP3 link and AAL2 path. Figure 3-5 shows the links on the ATM-based Iu-CS interface. Figure 3-5 Links on the Iu-CS Interface

The RINT shown in Figure 3-5 refers to ATM interface boards of the BSC6900. The UOIa/UOIc board is recommended when ATM transport is applied to the Iu-CS interface.

3.2.3 Differences of the Iu-CS Interface Between R99 and R4/R5/R6/R7/R8


In the 3GPP R99, the MSC connects to the BSC6900 as one entity. In the 3GPP R4/R5/R6/R7/R8, the MSC connects to the BSC6900 after being split into two entities, namely, MSC server and MGW.

Iu-CS Interface Defined in the 3GPP R4/R5/R6/R7/R8


Figure 3-6 shows the Iu-CS interface in the 3GPP R4/R5/R6/R7/R8.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-4

WCDMA RAN ATM Transport

3 Protocol Stacks

Figure 3-6 Iu-CS interface in the 3GPP R4/R5/R6/R7/R8

The network may require multiple MGWs depending on the traffic volume. In practice, the MSC server is often not directly connected to the BSC6900. Data is forwarded between the MSC server and the BSC6900 through the routes configured on the MGW. Figure 3-7 shows an example of the network structure on the Iu-CS interface in the 3GPP R4/R5/R6/R7/R8. Figure 3-7 Example of the network structure on the Iu-CS interface in the 3GPP R4/R5/R6/R7/R8

Data Configuration on the BSC6900


In the 3GPP R99, the BSC6900 needs to be configured with only one type of Iu-CS signaling point, that is, the MSC. In the 3GPP R4/R5/R6/R7/R8, the BSC6900 needs to be configured with the following two types of Iu-CS signaling point:

MSC server (also called Iu-CS RANAP signaling point) MGW (also called Iu-CS ALCAP signaling point)

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-5

WCDMA RAN ATM Transport

3 Protocol Stacks

Table 3-1 describes the differences between signaling point configuration in R99 and that in R4/R5/R6/R7/R8. Table 3-1 Differences between signaling point configuration in R99 and that in R4/R5/R6/R7/R8 Item Type Quantity R4/R5/R6/R7/R8 Iu-CS RANAP signaling point and Iu-CS ALCAP signaling point More than one R99 Iu-CS signaling point One

3.3 Iu-PS over ATM


3.3.1 Protocol Stack
Figure 3-8 shows the protocol stack for the Iu-PS interface. Figure 3-8 Protocol stack for the ATM-based Iu-PS interface

The transport network layer of the Iu-PS interface consists of the transport network layer user plane (area A) and the transport network layer user plane (area C). Areas A and C share the physical layer and ATM layer. Therefore, all links in the two areas can be carried on common physical links.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-6

WCDMA RAN ATM Transport

3 Protocol Stacks

3.3.2 Links on the Iu-PS Interface


The Iu-PS links on the CN side are of two types: MTP3 link and IPoA PVC. Figure 3-9 shows the links on the ATM-based Iu-PS interface. Figure 3-9 Links on the ATM-based Iu-PS interface

The RINT shown in Figure 3-9 refers to the UOIa/UOIc board.

3.3.3 IPoA Data Configuration on the Iu-PS User Plane


On the ATM-based Iu-PS interface, the IPoA PVC is implemented on the user plane.

IPoA PVC on the Iu-PS User Plane


Figure 3-10 shows the IPoA PVC on the Iu-PS user plane. Figure 3-10 IPoA PVC on the Iu-PS interface

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-7

WCDMA RAN ATM Transport

3 Protocol Stacks

The RINT shown in Figure 3-10 refers to ATM interface boards UOIa/UOIc, AOUa/AOUc, and AEUa.

IPoA Data on the Iu-PS User Plane


Table 3-2 describes the IPoA data to be configured on the user plane of the ATM-based Iu-PS interface. Table 3-2 IPoA data on the user plane of the ATM-based Iu-PS interface Item Description

Local IP address of the IPoA PVC (IPADDR) Device IP address on the ATM interface board of the BSC6900 Peer IP address of the IPoA PVC (PEERIPADDR) IP address of the gateway on the SGSN side

PVC between the interface board carrying the IPoA data and the gateway on the SGSN side Route between the interface board carrying If the IP address of the interface board carrying the IPoA the IPoA data and the network segment of data and the IP address of the peer SGSN are located on the peer SGSN different subnets, routes to the destination IP address need to be configured at the BSC6900. DSTIP is the IP address of the SGSN, and NEXTHOP is the IP address of the gateway on the SGSN side.

On the Iu-PS interface, the SGSN must be configured with routes to the network segment to which the IP address of the BSC6900 interface board belongs. The next hop is the gateway on the BSC6900 side. Otherwise, PS services cannot be provided.

3.4 Iur over ATM


3.4.1 Protocol Stack
Figure 3-11 shows the protocol stack for the Iur interface.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-8

WCDMA RAN ATM Transport

3 Protocol Stacks

Figure 3-11 Protocol stack for the ATM-based Iur interface

The transport network layer of the ATM-based Iur interface consists of the following areas:

Transport network layer user plane (area A) Transport network layer control plane (area B) Transport network layer user plane (area C)

3.4.2 Links on the Iur Interface


The Iur links are of two types: MTP3 link and AAL2 path. Figure 3-12 shows the links on the ATM-based Iur interface.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-9

WCDMA RAN ATM Transport

3 Protocol Stacks

Figure 3-12 Links on the Iur interface

The RINT shown in Figure 3-12 refers to ATM interface boards UOIa/UOIc, AOUa/AOUc, and AEUa.

3.4.3 Configuration Principles for Static Relocation Routes over Iur


The IP routes on the Iur interface are used to forward the PS data during Serving Radio Network Subsystem (SRNS) relocation. During the SRNS relocation, the PS data is transferred from the local BSC6900 to the SGSN and then to the neighboring BSC6900. Therefore, the prerequisites for configuring IP routes on the Iur interface are that the IP paths between the local BSC6900 and the SGSN, between the neighboring BSC6900 and the SGSN, and between the serving BSC6900 and the drift BSC6900 are configured. Figure 3-13 shows the configuration of IP routes on the Iur interface. The IP routes configured in multiple subsystems are similar.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-10

WCDMA RAN ATM Transport

3 Protocol Stacks

Figure 3-13 IP route configuration on the Iur interface

The RINT shown in Figure 3-13 refers to IP interface boards PEUa, POUa/POUc, UOIa (UOIa_IP), FG2a/FG2c, and GOUa/GOUc.

3.5 ATM Transport Modes


ATM transport has three modes: UNI, fractional, and IMA.

3.5.1 UNI Mode


Principles of UNI Mode
The UNI mode is a transport mode at the Transmission Convergence (TC) sublayer of the physical layer. In UNI mode, an ATM cell is directly carried on an E1/T1 frame and the bits of the ATM cell are sequentially mapped to the valid timeslots on the E1/T1 frame. Figure 3-14 shows the mapping between the ATM cell and the E1 timeslots in UNI mode. The 53 bytes of the ATM cell are sequentially carried on E1 timeslots. Each E1 frame provides 31 timeslots (with slot 0 unavailable) for carrying the ATM cell.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-11

WCDMA RAN ATM Transport

3 Protocol Stacks

Figure 3-14 Mapping between the ATM cell and the E1 timeslots in UNI mode

The UNI mode has the characteristics of scrambling, line coding, 16-timeslot enabling, and clock mode. The related parameters are as follows:

Scrambling switch: specifies whether to enable scrambling. Line coding method: specifies the line coding method. 16-timeslot switch: specifies whether to use timeslot 16 or not.

The settings of scrambling switch, line coding method, and 16-timeslot switch at both ends of E1/T1 must be identical. The parameters corresponding to UNI mode are shown in Table 3-3. Table 3-3 Parameters correspond to UNI mode NE RNC NodeB Scrambling Switch SCRAMBLESW SCRAM Line Coding Method PTCODE LNCODE 16-Timeslot Switch
TS16ENABLE

TS16

Clock Mode
There are two clock modes on the RNC side:

Common Transmit Clock (CTC): In CTC clock mode, all links in an IMA group share one clock source. The clock source may be extracted from the same external clock or from a link. Independent Transmit Clock (ITC): In ITC mode, the clocks used by the links within an IMA group are derived from at least two clock sources. The loopback clock mode is a special case of the ITC mode.

The clock mode on the RNC is not configurable, and the default clock mode on the RNC side is CTC.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-12

WCDMA RAN ATM Transport

3 Protocol Stacks

The clock mode on the NodeB side is specified by the parameter CLKM(UNI mode/fractional mode)/CLKM(IMA mode). The clock mode settings at both ends of E1/T1 must be identical.

Line Coding Method


There are four line coding method:

HDB3 (for E1 port) AMI (for E1/T1 port) AMI_ZCS (for E1/T1 port) B8ZS (for T1 port)

The coding methods of E1 port are HDB3 and AMI, and the HDB3 is recommended. HDB3 represents high-density bipolar code. It is not easy to be interfered, and the transmission distance is about several kilometers. The coding methods of T1 port are B8ZS and AMI, and B8ZS is recommended. It helps prevent clock signals from being lost, while AMI cannot perform this function.

3.5.2 Fractional Mode


Fractional mode (WRFD-050302 Fractional ATM Function on Iub Interface) is applicable to the Transmission Convergence (TC) sublayer of the physical layer. This section describes the principles and functions of fractional ATM, introduces the two implementation modes (that is, fractional IMA and fractional ATM), and provides the principles for configuring fractional IMA links and fractional ATM links.

Principles of Fractional ATM


In the case of fractional ATM, multiple timeslots out of the 32 timeslots on an E1 (or 24 timeslots on a T1) are used to transmit an ATM cell. At the transmission end, an ATM cell is mapped to multiple timeslots among the 31 timeslots on an E1 (or 24 timeslots on a T1). At the reception end, the ATM cell is restored from the associated timeslots on the E1/T1. Figure 3-15 shows the fractional ATM mode. An E1 frame has timeslots numbered from 0 to 31. All the timeslots except timeslot 0 are available for service data transmission. A T1 frame has timeslots numbered from 1 to 24. All the timeslots are available for service data transmission. The timeslots to which the ATM cell is not mapped can transmit other data. Figure 3-15 Fractional ATM mode

If multiple E1/T1 trunks exist between the transmission end and the reception end and work in IMA mode, such an IMA mode is called fractional IMA. In fractional IMA mode, an IMA group contains multiple fractional ATM links. The fractional ATM mode has the characteristics of scrambling, line coding, and clock mode. For details about clock mode, see Clock Mode. The related parameters are as follows:

Scrambling switch: specifies whether to enable scrambling. Line coding method: specifies the line coding method.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-13

WCDMA RAN ATM Transport

3 Protocol Stacks

E1/T1 timeslot: specifies the timeslot used to transmit the ATM cell.

The setting of scrambling switch, line coding method, and E1/T1 timeslot at both ends of E1/T1 must be identical. The parameters corresponding to fractional mode are shown in Table 3-4. Table 3-4 Parameters correspond to fractional mode NE RNC NodeB Scrambling Switch SCRAMBLESW SCRAM Line Coding Method PTCODE LNCODE E1/T1 Timeslot TSBITMAP TSN

Function of Fractional ATM


After the fractional ATM function is enabled, the ATM cells of a 3G network can be transmitted over an existing 2G network, as shown in Figure 3-16. Figure 3-16 Fractional ATM function

Two Modes of the Fractional ATM Function


There are two implementation modes of the fractional ATM function on the Iub interface:

Fractional ATM In fractional ATM mode, multiple idle timeslots can be used for transmission. Fractional IMA In fractional IMA mode, multiple fractional IMA links are logically gathered into a group with each fractional IMA link occupying the same number of idle timeslots.

The parameter FRALNKT is used to specify the fractional link mode on the RNC side.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-14

WCDMA RAN ATM Transport

3 Protocol Stacks

The fractional ATM/IMA mode are applicable only to the AEUa/AOUc board.

3.5.3 IMA Mode


Overview
IMA mode (WRFD-050304 IMA Transmission for E1T1 or Channelized STM-1/OC-3 on Iub Interface) is applicable to the Transmission Convergence (TC) sublayer of the physical layer. The IMA function is implemented by the IMA group, which is composed of either IMA links or fractional IMA links. All IMA links within an IMA group must be of the same type, either common IMA link or fractional IMA link. If an IMA group is composed of fractional IMA links, the quantity of timeslots carrying each fractional IMA link must be identical.

Principles of IMA Mode


Figure 3-17 shows the principles of the IMA mode based on the assumption that each IMA group contains three E1/T1 links.

At the transmission end, the IMA group receives the ATM cell stream from the ATM layer and distributes the cells among the E1/T1 links. At the reception end, the IMA group reassembles the cells to restore the original ATM cell stream, and then transfers the cell stream to the ATM layer.

The physical layer provides high-speed transport channels for ATM cells from the perspective of the ATM layer. Figure 3-17 Principles of the IMA mode

In IMA mode, ATM cells, IMA Control Protocol (ICP) cells, and filler cells form an IMA frame to implement necessary controlling functions. The length of an IMA frame, m, is defined during the setup of an IMA group. The parameter FRMLEN (at the RNC)/FRMLEN (at the NodeB) is used to specify the length of an IMA frame. Figure 3-18 shows an IMA frame. The mapping between the ATM cell and the physical link (that is, the E1/T1 link) is similar to that in UNI mode.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-15

WCDMA RAN ATM Transport

3 Protocol Stacks

Figure 3-18 IMA frame

The IMA mode has the characteristics of scrambling, line coding, 16-timeslot enabling, and clock mode. The clock mode of an IMA group is defined from the perspective of an IMA group rather than a single link. For details about clock mode, see Clock Mode. The related parameters are as follows:

Scrambling switch: specifies whether to enable scrambling. Line coding method: specifies the line coding method. 16-timeslot switch: specifies whether to use timeslot 16 or not.

The setting of scrambling switch, line coding method, and 16-timeslot switch at both ends of E1/T1 must be identical. The parameters corresponding to IMA mode are shown in Table 3-3. Table 3-5 Parameters correspond to IMA mode NE RNC NodeB Scrambling Switch SCRAMBLESW SCRAM Line Coding Method PTCODE LNCODE 16-Timeslot Switch
TS16ENABLE

TS16

3.6 Timeslot Cross Connection


The timeslot cross connection function implements cross connections between timeslots on two E1/T1s at the physical medium (PM) sublayer of the physical layer.

3.6.1 Principles of Timeslot Cross Connection


Figure 3-19 shows an example of timeslot cross connection. The timeslot cross connection device cross-connects the timeslots on one E1/T1 to the timeslots on the other E1/T1. In the example shown in the following figure, the device cross-connects slots 2 and 3 on one E1/T1 to slots 4 and 8 on another E1/T1 respectively.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-16

WCDMA RAN ATM Transport

3 Protocol Stacks

Figure 3-19 Example of timeslot cross connection

3.6.2 Function of Timeslot Cross Connection


The AEUa/PEUa/POUc board supports timeslot cross connection. Through the configured timeslot cross connection, the E1 data in TS A of the source port is transmitted to TS B of the destination port. Therefore, the timeslot cross connection helps provide a transparent data transmission channel for the 2G equipment or NodeB monitoring equipment. Figure 3-20 shows implementation of timeslot cross connection. Figure 3-20 Implementation of timeslot cross connection

Neither the source timeslot nor the target timeslot of a timeslot cross connection can be used by other applications, such as fractional ATM, IMA, and UNI. If an E1 link is configured with a timeslot cross connection, the E1 link cannot carry any IMA or UNI link. The other timeslots on this E1 link can carry fractional ATM or fractional IMA links.

The related parameters of the timeslot-cross connection function are as follows:

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-17

WCDMA RAN ATM Transport


3 Protocol Stacks

SRCPORTNO: specifies the source port to perform the timeslot-cross connection function. SRCTSMASK: specifies the timeslots occupied by the source port. DSTPORTNO: specifies the destination port to perform the timeslot-cross connection function. DSTTSMASK: specifies the timeslots occupied by the destination port.

3.7 PVC Parameters of the ATM Layer


For configuring the IPoA PVCs, AAL2 paths, SAAL links, or VPCLCX links, the PVC parameters need to be set.

3.7.1 VPI and VCI


The main characteristics of the ATM technology are multiplexing, switching, and transmitting of ATM cells. All these operations are performed over Virtual Channels (VCs). A VC and a Virtual Path (VP) are identified by Virtual Channel Identifier (VCI) and Virtual Path Identifier (VPI) respectively. Figure 3-21 shows the relation between VC and VP.

A VC is identified by a VCI. It is a logical connection between ATM nodes and is the channel for transmitting ATM cells between two or more nodes. The VC is used for the data transmission between mobile terminals, between networks, or between mobile terminal and network. A VP is a group of VCs at a given reference point. The VCs in the group have the same VPI.

Figure 3-21 Relation between VC and VP

3.7.2 Service Type


The ATM services are of five types (WRFD-05030107 CBR, RT-VBR, NRT-VBR, UBR ATM QoS Classes, WRFD-050305 UBR+ ATM QoS Class): Constant Bit Rate (CBR), Real-Time Variable Bit Rate (RT-VBR), Non-Real-Time Variable Bit Rate (NRT-VBR), Unspecified Bit Rate (UBR), and UBR_PLUS (UBR+). Table 3-6 describes the types of service. Table 3-6 Types of service Type of Service CBR RT-VBR NRT-VBR Description No error check, flow control, or other processing Rate of a service with variable-rate data streams and strict real-time requirements, for example, interactive compressed video (video telephony). Rate of a service that is applicable to timing transmission. A service of this type, for example, e-mail, is relatively insensitive to delivery time or delay.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-18

WCDMA RAN ATM Transport

3 Protocol Stacks

Type of Service UBR

Description Rate of a service with no commitment to transmission and no feedback on congestion. This type of service is ideal for the transmission of IP datagrams. In congestion, UBR cells are discarded, and no feedback or request for slowing down the data rate is delivered to the transmission end. UBR+ is an enhancement of UBR with minimum desired cell rate (MDCR) indication. UBR+ is the most suitable for Iub OAM channel. The MCR of UBR+ ensures the connectivity of OAM connection in the case of Iub transmission resource congestion, and the best effort service of UBR+ uses the transmission bandwidth completely.

UBR+

Table 3-7 describes the characteristics of different ATM services. Table 3-7 Characteristics of different ATM services Characteristic Bandwidth guarantee Applicability to real-time communication Applicability to bursts of communication Feedback on congestion CBR Yes Yes No No RT-VBR Yes Yes Yes No NRT-VBR Yes No Yes No UBR No No No No UBR+ Yes No No No

The ATM service type is also called ATM QoS class. The CBR, RT-VBR, NRT-VBR, or UBR ATM QoS classes can be configured for AAL2 path, and the UBR+ ATM QoS class is generally used for Iub OAM connection. The service types carried on the AAL2 paths can be determined by running the ADD ATMTRF command, and then the mapping between the service types and the transmission resources for the adjacent node can be configured by running the ADD TRMMAP command.

3.7.3 ATM Traffic Records


The ATM traffic records are public resources, which can be used by the IPoA PVCs, AAL2 paths, SAAL links, and VPCLCX links. You need to add the traffic record at the BSC6900 based on the traffic model of the link on the Iub/Iu-CS/Iu-PS/Iur interface. The ATM traffic records can be configured by the ADD ATMTRF command.

Traffic Parameters
Traffic parameters refer to the parameters used by each PVC for flow control. Table 3-8 describes the ATM traffic parameters. Table 3-8 ATM traffic parameters Parameter ID TRFX Description Identifies a traffic record.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-19

WCDMA RAN ATM Transport

3 Protocol Stacks

Parameter ID ST

Description Indicates the type of service carried over ATM. CBR and RT-VBR indicate real-time services, which are usually carried on the user planes of the Iur, Iub, and Iu-CS interfaces. NRT-VBR and UBR indicate non-real-time services, which are usually carried on the user plane of the Iu-PS interface. Indicates the unit of PCR, SCR, and MCR. Indicates the maximum rate of transmitting ATM cells. The value of PCR must be greater than that of SCR. Indicates the average rate of transmitting ATM cells over a long time. Indicates the minimum rate of transmitting ATM cells. Indicates the maximum number of continuous ATM cells. Generally, the value of MBS cannot be greater than PCR x CDVT. The value of CDVT can be set as large as possible within the permission of the delay and delay variation. Indicates the maximum tolerable variation in the unit of 0.1 s. Describes the usage of the ATM traffic record.

UT PCR SCR MCR MBS

CDVT REMARK

The traffic rate is indicated in the following ways:


PCR: applicable when ST is set to CBR and the traffic rate is a constant value. Combination of PCR and SCR: applicable when ST is set to RTVBR or NRTVBR. MCR: applicable when ST is set to UBR_PLUS.

ATM Traffic Record Configuration Principles


Table 3-9 provides suggestions for configuring service types during configuration of ATM traffic records for links. Table 3-9 Recommended service types for links Link NCP/CCP AAL2 path IPoA PVC (user plane) IPoA PVC (management plane) MTP3 link Preferred Service Type (In Descending Order) CBR, RTVBR RTVBR, NRTVBR, CBR, UBR UBR UBR_PLUS, RTVBR, NRTVBR, CBR, UBR RTVBR, NRTVBR, CBR

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-20

WCDMA RAN ATM Transport

3 Protocol Stacks

In practice, ATM traffic records should be negotiated between the local and the peer equipment. The ATM traffic parameters, such as PCR and SCR, should be configured depending on the traffic model in use. When configuring ATM traffic records for links, you need to consider the traffic on the interface boards of the BSC6900.

3.8 AAL5
In ATM transport mode, AAL5 connections are used to carry the signaling on the Iub/Iur/Iu interface (WRFD-05030105 permanent AAL5 connections for control plane traffic). As defined in 3GPP specifications, UNI-SAAL is used for control plane connections on the Iub interface, and NNI-SAAL is used for control plane connections on the Iur and Iu interfaces. The AAL5 connections for Iub/Iu-CS/Iur are set up by configuring the SAAL links. You can run the ADD SAALLNK command to configure the AAL5 connections on the Iub/Iur/Iu-CS interface. On the RNC side, when an AAL5 connection is configured, the TXTRFX and RXTRFX parameters need to be set. The TXTRFX and RXTRFX parameters record the ATM traffic, and they can be configured through the ADD ATMTRF command. An SAAL link is carried on an ATM PVC. The parameters CARRYVPI and CARRYVCI are used to identify the PVCs on the RNC side, and the parameters VPI and VCI are used to identify the PVCs on the NodeB side. The PVC identifier and other PVC attributes must be negotiated between the BSC6900 and the peer end. The signaling messages carried on the UNI-SAAL links are classified into NCP, CCP, and ALCAP, and the signaling messages carried on the NNI-SAAL links are MTP3, as described in Table 3-10. Table 3-10 Data carried on SAAL links Data Type NCP CCP ALCAP MTP3 Description The NCP carries common process messages of NBAP over the Iub interface. An Iub interface has only one NCP. A CCP carries dedicated process messages of NBAP over the Iub interface. An Iub interface may have multiple CCPs. The number of CCPs depends on network planning. ALCAP is also called Q.AAL2. Typically, an Iub interface has one ALCAP. MTP3 links are contained in an MTP3 link set. MTP3 links are carried on the SAAL links of Network-to-Network Interface (NNI) type.

3.9 AAL2 Path


3.9.1 AAL2 Connections and AAL2 Path
The Q.AAL2 module is responsible for dynamically setting up and releasing AAL2 connections between the BSC6900 and the peer end. The peer end can be a NodeB, a CS CN node, or a neighboring BSC6900. PATHID specifies the ID of an AAL2 path, and the PATHID of the same AAL2 path configured between two AAL2 nodes must be the same. An AAL2 path contains multiple AAl2 connections. CID specifies the ID of an AAL2 connection on the path. The CID state can be Busy or Idle. If the CID is in the busy state, the CID carries traffic; if the CID is in the idle state, no traffic is carried on it. The AAL2 paths can be configured for the Iub/Iu-CS/Iur interface (WRFD-05030104 Dynamic AAL2 Connections on Iub/IuCS/Iur Interface). Figure 3-22 shows the relation between an AAL2 path and AAL2 connections on the Iub interface.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-21

WCDMA RAN ATM Transport

3 Protocol Stacks

Figure 3-22 Relation between an AAL2 path and AAL2 connections

According to different traffic classes (conversational, streaming, interactive, and background), the following types of AAL2 path can be configured:

CBR RT-VBR NRT-VBR UBR

According to different types of service (R99, HSDPA, and HDUPA), the following types of AAL2 path can be configured:

R99 HSPA SHARE

The AAL2 path can be configured through the ADD AAL2PATH command. On the RNC side, when an AAL2 path is configured, the TXTRFX and RXTRFX parameters need to be set. They determine the type of path. The TXTRFX and RXTRFX parameters record the ATM traffic, and they can be configured through the ADD ATMTRF command. For details, see section 3.7.3 "ATM Traffic Records." An AAL2 path is carried on a PVC. The parameters VPI and VCI are used to identify the PVCs. The PVC identifier and other PVC attributes must be negotiated between the BSC6900 and the peer end.

3.9.2 AAL2 Route


An AAL2 path may reach not the destination node but an adjacent node. In this case, AAL2 routes can be configured to reach the destination node. The AAL2 route to an ATM node can be configured through the ADD AAL2RT command. Figure 3-23 shows an example of the AAL2 route. Figure 3-23 Example of the AAL2 route

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-22

WCDMA RAN ATM Transport

3 Protocol Stacks

Even if the destination node and the adjacent node are the same, an AAL2 route needs to be configured. The AAL2 route cannot be configured for the adjacent node of the IUPS type.

3.10 MTP3
3.10.1 MTP3 Links
MTP3 links are contained in an MTP3 link set. MTP3 links are carried on the SAAL links of Network-to-Network Interface (NNI) type. You can run the command ADD MTP3LKS to specify an MTP3 link set, and then run the command ADD MTP3LNK to add the MTP3 links by using the parameter SIGLKSX.

MTP3 Links for Iu-CS Interface


The configuration of MTP3 links between the BSC6900 and the MSC server depends on the networking between the MSC server and the BSC6900:

If the MSC server is directly connected to the BSC6900, at least one MTP3 link is required for the MSC server (IUCS_RANAP signaling point). It is recommended that more than one MTP3 link be configured. If the MSC server is connected to the BSC6900 through the MGW, the MSC server (IUCS_RANAP signaling point) does not require any MTP3 link. If the MSC server is connected to the BSC6900 not only directly but also through the MGW, as shown in Figure 3-24, the MSC server (IUCS-RANAP) requires at least one MTP3 link. It is recommended that more than one MTP3 link be configured.

Figure 3-24 Example of connections between the MSC server and the BSC6900

MTP3 Links for Iu-PS Interface


An Iu-PS interface requires at least one MTP3 link. It is recommended that more than one MTP3 link be configured.

MTP3 Links for Iur Interface


The configuration of MTP3 links depends on the networking between the BSC6900 and the neighboring BSC6900:

If the BSC6900 is directly connected to the neighboring BSC6900, the Iur interface requires at least one MTP3 link. It is recommended that more than one MTP3 link be configured.
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 3-23

Issue 01 (2011-03-30)

WCDMA RAN ATM Transport

3 Protocol Stacks

If the BSC6900 is connected to the neighboring BSC6900 through a Signaling Transfer Point (STP), no MTP3 link is required.

It is recommended that the SAAL links of NNI type be evenly distributed to the SPU subsystems in the MPS/EPS so that the signaling exchange can be reduced between the SPU subsystems.

3.10.2 Types of MTP3 DSPs


The BSC6900 supports seven types of Destination Signaling Point (DSP): IUCS, IUCS_ALCAP, IUCS_RANAP, IUPS, IUR, STP, and AAL2SWITCH. DSPs of different types have different meanings. Table 3-11 describes the types of DSP. Table 3-11 Types of DSP DSP Type IUCS IUCS_ALCAP IUCS_RANAP IUPS IUR STP AAL2SWITCH Description R99 MSC DSP. The IUCS DSP has the control plane functions of both radio network layer and transport network layer on the Iu-CS interface. R4 MGW DSP. The IUCS_ALCAP DSP has the control plane functions of the transport network layer on the Iu-CS interface. R4 MSC server DSP. The IUCS_RANAP DSP has the control plane functions of the radio network layer on the Iu-CS interface. Signaling point in the Iu-PS control plane Other BSC6900 signaling points Signaling transfer point AAL2 transfer point

3.10.3 Signaling Route Mask and Signaling Link Mask


The number (represented by n) of 1s in a signaling route mask determines the maximum number of routes (2n). For example, B0000 indicates that there is at most one route. B0001 or B1000 indicates that there are at most two routes. The number (represented by n) of 1s in a signaling link mask determines the maximum number of links (2n). For example, B0000 indicates that there is at most one link. B0001 or B1000 indicates that there are at most two links. The result of the logical AND operation on the signaling link mask and the signaling route mask must be 0, as shown in Figure 3-18. Figure 3-25 Relation between signaling link mask and signaling route mask

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-24

WCDMA RAN ATM Transport

3 Protocol Stacks

3.11 IPOA PVC


IPOA is a technology in which IP packets are transmitted over the ATM transport network. Essentially, the ATM links over each interface are carried over PVCs. The IPoA PVCs on the Iub interface are used to transmit the OM information of a NodeB. In this case, the IPoA PVC is called the management plane IPoA PVC. The IPoA PVC on the Iu-PS interface is a PVC to the SGSN gateway. The IPOA PVC can be configured through the ADD IPOAPVC command. If the parameter PEERT is set to IUB, the IPOA link can only be used as an OM channel. The parameters CARRYVPI and CARRYVCI are used to identify the PVCs. When an IPOA PVC is configured, the TXTRFX and RXTRFX parameters need to be set. The TXTRFX and RXTRFX parameters record the ATM traffic, and they can be configured through the ADD ATMTRF command.

3.12 F5
Huawei supports operations on ATM OAM F5 end-to-end flows specified in ITU I.610 (WRFD-05030110 F5):

Fault management
AIS: RDI: CC:

alarm indication signal remote defect indication continuity check and loopback monitoring reporting

Performance management
Forward Backward

Activation and deactivation

The CC can be activated to monitor the end-to-end AAL2 path virtual connect link (VCL) and Iu-PS user plane VCL. When one VCL for AAL2 path or Iu-PS GTPU is loss of continuity (LOC), AIS, or RDI, this VCL is blocked. Then the service is established on other alternative VCLs to prevent the failure of the call. You can run the SET VCLLOP command to activate or deactivate the CC function. When the parameter LOPT is set to LOCAL_LOOP, and the LOP VCL command is executed, the CC function is activated. When the parameter LOPT is set to NO_LOOP, the CC function is deactivated. Huawei also supports proprietary delay detection function. When an NE receives a detection start command from the NMS, it starts detecting delay on the current AAL2 link or AAL5 link and periodically reports the delay to the NMS. The 8-byte reserved IE (LB IE) in the loopback message is used to store the message transmission time. When an NE receives the loopback message, it calculates the delay based on the time difference between transmission and reception.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

3-25

WCDMA RAN ATM Transport

4 ATM Transmission Resources

4 ATM Transmission Resources


ATM transmission resources can be classified into physical resources, logical ports, resource groups, and paths. The transmission resources for Iub/Iu/Iur interfaces vary according to different networking. Huawei supports the following types of ATM transmission:

ATM over E1T1 on Iub interface (WRFD-05030101 ATM over E1T1 on Iub interface) ATM over channelized STM-1/OC-3 on Iub interface (WRFD-05030102 ATM over channelized STM-1/OC-3 on Iub interface) ATM over non-channelized STM-1/OC-3c on Iub/Iu/Iur interface (WRFD-05030103 ATM over non-channelized STM-1/OC-3c on Iub/Iu/Iur interface)

For details about the ATM transmission resources, see "Transmission Resources" in the Transmission Resource Management Feature Parameter Description.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

4-1

WCDMA RAN ATM Transport

5 ATM Transmission Resource Management

5 ATM Transmission Resource Management


For ATM transport, Huawei provides the following transmission resource management:

Admission control (WRFD-05030106 Call Admission Based on Used AAL2 Path Bandwidth), which is used to allow more users to be admitted with the QoS guaranteed. Transmission resource mapping, in which the CBR, RT-VBR, NRT-VBR, and UBR ATM QoS classes are used to implement differentiated services. Iub overbooking (WRFD-050405 Overbooking on ATM Transmission, WRFD-050406 ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission)), which is used to improve the usage efficiency on ATM transport scenario

For details about admission control, transmission resource mapping, and Iub overbooking, see the Transmission Resource Management Feature Parameter Description.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

5-1

WCDMA RAN ATM Transport

6 Parameters

6 Parameters
Table 6-1 Parameter description Parameter ID CARRYVCI NE BSC6900 MML Command ADD SAALLNK(Mandatory) Description Meaning: VCI value of the SAAL out BSC6900

MOD SAALLNK(Optional) GUI Value Range: 32~65535 Actual Value Range: 32~65535 Default Value: None CARRYVCI BSC6900 ADD IPOAPVC(Optional) Meaning: VCI value of the MOD IPOAPVC(Optional) VCL of the bearer network GUI Value Range: 32~65535 Actual Value Range: 32~65535 Default Value: None CARRYVPI BSC6900 ADD IPOAPVC(Optional) Meaning: VPI value of the MOD IPOAPVC(Optional) VCL of the bearer network GUI Value Range: 0~4095 Actual Value Range: 0~4095 Default Value: None CARRYVPI BSC6900 ADD SAALLNK(Mandatory) Meaning: VPI value of the SAAL out BSC6900

MOD SAALLNK(Optional) GUI Value Range: 0~4095 Actual Value Range: 0~4095 Default Value: None CDVT BSC6900 ADD ATMTRF(Optional) Meaning: Tolerable delay jitter GUI Value Range: 1024~212000 Actual Value Range: 1024~212000 Default Value: 1024 CLKM NodeB ADD IMAGRP MOD IMAGRP Meaning: Indicates the clock mode of the IMA group. Links in an IMA group may pass through different transport

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-1

WCDMA RAN ATM Transport

6 Parameters

Parameter ID

NE

MML Command

Description networks. As a result, links in the IMA group may use different clock sources for synchronization. It is recommended that the IMA group work in Independent Transmit Clock (ITC) mode. GUI Value Range: CTC(Common Transmit Clock), ITC(Independent Transmit Clock) Actual Value Range: CTC, ITC Default Value: ITC(Independent Transmit Clock)

CLKM

NodeB

ADD E1T1 SET E1T1

Meaning: Indicates the clock mode of the E1/T1 port. 1. If the BS extracts the line clock from the E1/T1 port, the clock mode of the E1/T1 port must be set to SLAVE. If the BS provides the line clock for the lower-level equipment through the E1/T1 port, the clock mode of the E1/T1 port must be set to MASTER. Otherwise, the line clock may fail to work properly. 2. When the E1/T1 port provides an 8K clock reference for the transmission interface board, the clock mode of the E1/T1 port must be set to SLAVE. 3. The clock modes of E1/T1 ports used by an inter-board MLPPP group cannot be all set to SLAVE. GUI Value Range: MASTER(Master Mode), SLAVE(Slave Mode) Actual Value Range:

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-2

WCDMA RAN ATM Transport

6 Parameters

Parameter ID

NE

MML Command

Description MASTER, SLAVE Default Value: SLAVE(Slave Mode)

DSTIP

BSC6900

ADD IPRT(Mandatory) RMV IPRT(Mandatory) MOD IPRT(Mandatory)

Meaning: Destination IP address GUI Value Range: None Actual Value Range: 0.0.0.0~255.255.255.255 Default Value: None

DSTPORTNO

BSC6900

ADD TSCROSS(Mandatory)

Meaning: Destination of the timeslot cross connection GUI Value Range: 0~335 Actual Value Range: 0~335 Default Value: None

DSTTSMASK

BSC6900

ADD TSCROSS(Mandatory)

Meaning: Target timeslot mask GUI Value Range: TS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), TS4(Time_slot_4), TS5(Time_slot_5), TS6(Time_slot_6), TS7(Time_slot_7), TS8(Time_slot_8), TS9(Time_slot_9), TS10(Time_slot_10), TS11(Time_slot_11), TS12(Time_slot_12), TS13(Time_slot_13), TS14(Time_slot_14), TS15(Time_slot_15), TS16(Time_slot_16), TS17(Time_slot_17), TS18(Time_slot_18), TS19(Time_slot_19), TS20(Time_slot_20), TS21(Time_slot_21), TS22(Time_slot_22), TS23(Time_slot_23), TS24(Time_slot_24), TS25(Time_slot_25), TS26(Time_slot_26), TS27(Time_slot_27), TS28(Time_slot_28), TS29(Time_slot_29),

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-3

WCDMA RAN ATM Transport

6 Parameters

Parameter ID

NE

MML Command

Description TS30(Time_slot_30), TS31(Time_slot_31) Actual Value Range: TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31 Default Value: None

FRALNKT

BSC6900

ADD FRALNK(Mandatory)

Meaning: Fractional link type GUI Value Range: FRAATM, FRAIMA Actual Value Range: FRAATM, FRAIMA Default Value: None

FRMLEN

BSC6900

ADD IMAGRP(Optional) Meaning: Frame length. A MOD IMAGRP(Optional) longer frame improves the transmission efficiency, but at the same time reduces the sensitivity to errors. GUI Value Range: D32, D64, D128, D256 Actual Value Range: D32, D64, D128, D256 Default Value: D128

IPADDR

BSC6900

ADD IPOAPVC(Mandatory) RMV IPOAPVC(Mandatory) MOD IPOAPVC(Mandatory)

Meaning: Local IP address GUI Value Range: None Actual Value Range: 0.0.0.0~255.255.255.255 Default Value: None Meaning: Indicates the line coding mode of an E1/T1 port. GUI Value Range: HDB3(E1 HDB3 Code), AMI(E1/T1 AMI Code), B8ZS(T1 B8ZS Code), UNKNOWN(Unknown) Actual Value Range: HDB3, AMI, B8ZS,

LNCODE

NodeB

ADD E1T1 SET E1T1

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-4

WCDMA RAN ATM Transport

6 Parameters

Parameter ID

NE

MML Command

Description UNKNOWN Default Value: None

LOPT

BSC6900

SET VCLLOP(Mandatory) Meaning: This parameter specifies the loopback type. GUI Value Range: NO_LOOP(No loop), LOCAL_LOOP(Local loop) Actual Value Range: NO_LOOP, LOCAL_LOOP Default Value: None

MBS

BSC6900

ADD ATMTRF(Optional) Meaning: Maximum burst size (MBS) GUI Value Range: 3~10000 Actual Value Range: 3~10000 Default Value: None

MCR

BSC6900

ADD ATMTRF(Optional) Meaning: Minimum guarantee rate of the ATM traffic GUI Value Range: 30~70754 Actual Value Range: 30~70754 Default Value: None

NEXTHOP

BSC6900

ADD IPRT(Mandatory) RMV IPRT(Mandatory) MOD IPRT(Mandatory)

Meaning: IP address of the next hop GUI Value Range: None Actual Value Range: 0.0.0.0~255.255.255.255 Default Value: None

PATHID

BSC6900

ADD AAL2PATH(Mandatory) MOD AAL2PATH(Mandatory) RMV AAL2PATH(Mandatory)

Meaning: ID of one AAL2 path between two AAL2 nodes. The PATHID of the same AAL2 path configured between two AAL2 nodes must be the same. The value should not be equal to 0. GUI Value Range: 1~4294967295 Actual Value Range:

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-5

WCDMA RAN ATM Transport

6 Parameters

Parameter ID

NE

MML Command

Description 1~4294967295 Default Value: None

PCR

BSC6900

ADD ATMTRF(Optional) Meaning: Peak rate of the ATM traffic GUI Value Range: 30~353207 Actual Value Range: 30~353207 Default Value: None

PEERIPADDR

BSC6900

ADD IPOAPVC(Mandatory) RMV IPOAPVC(Mandatory) MOD IPOAPVC(Mandatory)

Meaning: Peer IP address GUI Value Range: None Actual Value Range: 0.0.0.0~255.255.255.255 Default Value: None Meaning: IPoA PVC peer type GUI Value Range: IUB, IUPS, OTHER Actual Value Range: IUB, IUPS, OTHER Default Value: None

PEERT

BSC6900

ADD IPOAPVC(Mandatory)

PTCODE

BSC6900

SET E1T1(Optional)

Meaning: Line coding method GUI Value Range: B8ZS(B8ZS), HDB3(HDB3), AMI(AMI), AMI_ZCS(AMI_ZCS) Actual Value Range: B8ZS, HDB3, AMI, AMI_ZCS Default Value: None

REMARK

BSC6900

ADD ATMTRF(Optional) Meaning: Purpose description of the ATM MOD traffic record ATMTRF(Mandatory) GUI Value Range: None Actual Value Range: 1~250 characters Default Value: None

RXTRFX

BSC6900

ADD SAALLNK(Mandatory)

Meaning: RX traffic record index of the SAAL link

MOD SAALLNK(Optional) GUI Value Range: 100~1999

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-6

WCDMA RAN ATM Transport

6 Parameters

Parameter ID

NE

MML Command

Description Actual Value Range: 100~1999 Default Value: None

RXTRFX

BSC6900

ADD IPOAPVC(Optional) Meaning: Receiving traffic MOD IPOAPVC(Optional) index GUI Value Range: 100~1999 Actual Value Range: 100~1999 Default Value: None

RXTRFX

BSC6900

ADD AAL2PATH(Mandatory) MOD AAL2PATH(Optional)

Meaning: RX traffic record index of the AAL2 Path on the out BSC6900 port (ATM layer PVC traffic). The traffic index is configured in the ATM traffic table (see "LST ATMTRF"). GUI Value Range: 100~1999 Actual Value Range: 100~1999 Default Value: None

SCR

BSC6900

ADD ATMTRF(Optional) Meaning: Average rate of the ATM traffic GUI Value Range: 30~353207 Actual Value Range: 30~353207 Default Value: None

SCRAM

NodeB

ADD UNILNK

Meaning: Indicates whether scrambling is applied to the UNI link. If LNCODE in an E1T1 MO is set to AMI, the UNI link must be scrambled. GUI Value Range: DISABLE(Disable), ENABLE(Enable) Actual Value Range: DISABLE, ENABLE Default Value: ENABLE(Enable)

SCRAM

NodeB

ADD FRAATM

Meaning: Indicates whether scrambling is

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-7

WCDMA RAN ATM Transport

6 Parameters

Parameter ID

NE

MML Command

Description applied to the fractional ATM link. GUI Value Range: DISABLE(Disable), ENABLE(Enable) Actual Value Range: DISABLE, ENABLE Default Value: ENABLE(Enable)

SCRAM

NodeB

ADD IMAGRP MOD IMAGRP

Meaning: Indicates whether scrambling is applied to the IMA group. GUI Value Range: DISABLE(Disable), ENABLE(Enable) Actual Value Range: DISABLE, ENABLE Default Value: ENABLE(Enable)

SCRAMBLESW

BSC6900

SET E1T1(Optional)

Meaning: Scramble switch GUI Value Range: OFF(OFF), ON(ON) Actual Value Range: OFF, ON Default Value: None

SIGLKSX

BSC6900

ADD MTP3LNK(Mandatory) MOD MTP3LNK(Mandatory) RMV MTP3LNK(Mandatory)

Meaning: Uniquely identifies a signaling link set. In a BSC6900, the number of the MTP3 signaling link set ranges from 0 to 186. MTP3 signaling link sets are uniquely but not necessarily consecutively numbered within a BSC6900 by using the signaling link set index. For example, you can set the number of an MTP3 signaling link set towards a neighboring MGW to 10 and the number of an MTP3 signaling link set towards another neighboring MGW to 12. GUI Value Range: 0~186 Actual Value Range:

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-8

WCDMA RAN ATM Transport

6 Parameters

Parameter ID

NE

MML Command

Description 0~186 Default Value: None

SRCPORTNO

BSC6900

ADD TSCROSS(Mandatory)

Meaning: Source of timeslot cross GUI Value Range: 0~335 Actual Value Range: 0~335 Default Value: None

SRCTSMASK

BSC6900

ADD TSCROSS(Mandatory)

Meaning: Source timeslot mask GUI Value Range: TS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), TS4(Time_slot_4), TS5(Time_slot_5), TS6(Time_slot_6), TS7(Time_slot_7), TS8(Time_slot_8), TS9(Time_slot_9), TS10(Time_slot_10), TS11(Time_slot_11), TS12(Time_slot_12), TS13(Time_slot_13), TS14(Time_slot_14), TS15(Time_slot_15), TS16(Time_slot_16), TS17(Time_slot_17), TS18(Time_slot_18), TS19(Time_slot_19), TS20(Time_slot_20), TS21(Time_slot_21), TS22(Time_slot_22), TS23(Time_slot_23), TS24(Time_slot_24), TS25(Time_slot_25), TS26(Time_slot_26), TS27(Time_slot_27), TS28(Time_slot_28), TS29(Time_slot_29), TS30(Time_slot_30), TS31(Time_slot_31) Actual Value Range: TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30,

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-9

WCDMA RAN ATM Transport

6 Parameters

Parameter ID

NE

MML Command

Description TS31 Default Value: None

ST

BSC6900

ADD ATMTRF(Mandatory)

Meaning: Service type of the ATM GUI Value Range: UBR, CBR, RTVBR, NRTVBR, UBR_PLUS Actual Value Range: UBR, CBR, RTVBR, NRTVBR, UBR_PLUS Default Value: None

TRFX

BSC6900

ADD ATMTRF(Mandatory) RMV ATMTRF(Mandatory) MOD ATMTRF(Mandatory)

Meaning: Traffic index. ATM traffic record indexes are used by the upper layers of the ATM layer. The upper layers consist of the SAAL link, AAL2 path, and IPoA PVC. Each ATM traffic record is uniquely numbered within a BSC6900 by using an ATM traffic record index. An ATM traffic record index ranges from 100 to 1999 (1 to 99 are reserved for internal use). The numbering is not necessarily consecutive. Specify different number ranges for different interfaces. For example, specify the range of 100 to 199 for ATM traffic record indexes over Iub, the range of 200 to 299 for ATM traffic record indexes over Iur, the range of 300 to 399 for ATM traffic record indexes over Iu-CS, and the range of 400 to 499 for ATM traffic record indexes over Iu-PS. Specify different ranges of ATM traffic record indexes for different links over an interface. For example, over the Iub interface, specify the range of 100

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-10

WCDMA RAN ATM Transport

6 Parameters

Parameter ID

NE

MML Command

Description to 149 for ATM traffic record indexes of SAAL links, the range of 150 to 179 for ATM traffic record indexes of AAL2 paths, and the range of 180 to 189 for ATM traffic record indexes of IPoA PVCs. GUI Value Range: 100~1999 Actual Value Range: 100~1999 Default Value: None

TS16

NodeB

ADD IMAGRP MOD IMAGRP

Meaning: Indicates whether to enable E1 timeslot 16. GUI Value Range: DISABLE(Disable), ENABLE(Enable) Actual Value Range: DISABLE, ENABLE Default Value: DISABLE(Disable)

TS16

NodeB

ADD UNILNK

Meaning: Indicates whether the UNI link can use timeslot 16 of an E1 port. GUI Value Range: DISABLE(Disable), ENABLE(Enable) Actual Value Range: DISABLE, ENABLE Default Value: DISABLE(Disable)

TS16ENABLE

BSC6900

SET E1T1(Optional)

Meaning: This parameter specifies whether to use timeslot 16, or not. GUI Value Range: OFF(OFF), ON(ON) Actual Value Range: OFF, ON Default Value: None

TSBITMAP

BSC6900

ADD FRALNK(Mandatory)

Meaning: Bearer timeslot

GUI Value Range: MOD FRALNK(Optional) TS1(Time_slot_1), TS2(Time_slot_2),

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-11

WCDMA RAN ATM Transport

6 Parameters

Parameter ID

NE

MML Command

Description TS3(Time_slot_3), TS4(Time_slot_4), TS5(Time_slot_5), TS6(Time_slot_6), TS7(Time_slot_7), TS8(Time_slot_8), TS9(Time_slot_9), TS10(Time_slot_10), TS11(Time_slot_11), TS12(Time_slot_12), TS13(Time_slot_13), TS14(Time_slot_14), TS15(Time_slot_15), TS16(Time_slot_16), TS17(Time_slot_17), TS18(Time_slot_18), TS19(Time_slot_19), TS20(Time_slot_20), TS21(Time_slot_21), TS22(Time_slot_22), TS23(Time_slot_23), TS24(Time_slot_24), TS25(Time_slot_25), TS26(Time_slot_26), TS27(Time_slot_27), TS28(Time_slot_28), TS29(Time_slot_29), TS30(Time_slot_30), TS31(Time_slot_31) Actual Value Range: TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31 Default Value: None

TSN

NodeB

ADD FRAATM

Meaning: Indicates the number of the ET/T1 timeslot that carries the fractional ATM link. GUI Value Range: TS1(Time Slot 1), TS2(Time Slot 2), TS3(Time Slot 3), TS4(Time Slot 4), TS5(Time Slot 5), TS6(Time Slot 6), TS7(Time Slot 7), TS8(Time Slot 8),

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-12

WCDMA RAN ATM Transport

6 Parameters

Parameter ID

NE

MML Command

Description TS9(Time Slot 9), TS10(Time Slot10), TS11(Time Slot11), TS12(Time Slot12), TS13(Time Slot13), TS14(Time Slot14), TS15(Time Slot15), TS16(Time Slot16), TS17(Time Slot17), TS18(Time Slot18), TS19(Time Slot19), TS20(Time Slot20), TS21(Time Slot21), TS22(Time Slot22), TS23(Time Slot23), TS24(Time Slot24), TS25(Time Slot25), TS26(Time Slot26), TS27(Time Slot27), TS28(Time Slot28), TS29(Time Slot29), TS30(Time Slot30), TS31(Time Slot31) Actual Value Range: TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31 Default Value: None

TXTRFX

BSC6900

ADD IPOAPVC(Optional) Meaning: Sending traffic MOD IPOAPVC(Optional) index GUI Value Range: 100~1999 Actual Value Range: 100~1999 Default Value: None

TXTRFX

BSC6900

ADD AAL2PATH(Mandatory) MOD AAL2PATH(Optional)

Meaning: TX traffic record index of the AAL2 Path on the out BSC6900 port (ATM layer PVC traffic). The traffic index is configured in the ATM traffic table (see "LST ATMTRF"). GUI Value Range: 100~1999

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-13

WCDMA RAN ATM Transport

6 Parameters

Parameter ID

NE

MML Command

Description Actual Value Range: 100~1999 Default Value: None

TXTRFX

BSC6900

ADD SAALLNK(Mandatory)

Meaning: TX traffic record index of the SAAL link

MOD SAALLNK(Optional) GUI Value Range: 100~1999 Actual Value Range: 100~1999 Default Value: None UT BSC6900 ADD ATMTRF(Optional) Meaning: Rate unit GUI Value Range: CELL/S, KBIT/S Actual Value Range: CELL/S, KBIT/S Default Value: None VCI BSC6900 ADD AAL2PATH(Mandatory) MOD AAL2PATH(Optional) Meaning: VCI of the AAL2 path out BSC6900 GUI Value Range: 32~65535 Actual Value Range: 32~65535 Default Value: None VCI NodeB ADD SAALLNK Meaning: Indicates the Virtual Channel Identifier (VCI), which is used for VC routing. GUI Value Range: 32~511 Actual Value Range: 32~511 Default Value: None VPI NodeB ADD SAALLNK Meaning: Indicates the Virtual Path Identifier (VPI), which is used for VP routing. A virtual path contains multiple virtual channels. GUI Value Range: 0~255 Actual Value Range: 0~255 Default Value: None VPI BSC6900 ADD Meaning: VPI of the AAL2

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-14

WCDMA RAN ATM Transport

6 Parameters

Parameter ID

NE

MML Command AAL2PATH(Mandatory) MOD AAL2PATH(Optional)

Description path out BSC6900 GUI Value Range: 0~4095 Actual Value Range: 0~4095 Default Value: None

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

6-15

WCDMA RAN ATM Transport

7 Counters

7 Counters
Table 7-1 Counter description Counter Counter Name ID Counter Description Feature ID WRFD-05030101 WRFD-05030101 WRFD-05030101 Feature Name ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface

50332673 VS.ATMUlTotal.1 ATM physical port_1 uplink total bandwidth 50332674 VS.ATMUlMaxUs ATM physical port_1 uplink ed.1 maximum used bandwidth 50332675 VS.ATMUlAvgUs ATM physical port_1 uplink ed.1 average used bandwidth

50332676 VS.ATMDlTotal.1 ATM physical port_1 downlink WRFD-05030101 total bandwidth 50332677 VS.ATMDlMaxUs ATM physical port_1 downlink WRFD-05030101 ed.1 maximum used bandwidth 50332678 VS.ATMDlAvgUs ATM physical port_1 downlink WRFD-05030101 ed.1 average used bandwidth 50332685 VS.ATMUlTotal.2 ATM physical port_2 uplink total bandwidth 50332686 VS.ATMUlMaxUs ATM physical port_2 uplink ed.2 maximum used bandwidth 50332687 VS.ATMUlAvgUs ATM physical port_2 uplink ed.2 average used bandwidth WRFD-05030101 WRFD-05030101 WRFD-05030101

50332688 VS.ATMDlTotal.2 ATM physical port_2 downlink WRFD-05030101 total bandwidth 50332689 VS.ATMDlMaxUs ATM physical port_2 downlink WRFD-05030101 ed.2 maximum used bandwidth 50332690 VS.ATMDlAvgUs ATM physical port_2 downlink WRFD-05030101 ed.2 average used bandwidth 50332697 VS.ATMUlTotal.3 ATM physical port_3 uplink total bandwidth 50332698 VS.ATMUlMaxUs ATM physical port_3 uplink ed.3 maximum used bandwidth 50332699 VS.ATMUlAvgUs ATM physical port_3 uplink ed.3 average used bandwidth WRFD-05030101 WRFD-05030101 WRFD-05030101

50332700 VS.ATMDlTotal.3 ATM physical port_3 downlink WRFD-05030101 total bandwidth 50332701 VS.ATMDlMaxUs ATM physical port_3 downlink WRFD-05030101 ed.3 maximum used bandwidth

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-1

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID

Feature Name ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic

50332702 VS.ATMDlAvgUs ATM physical port_3 downlink WRFD-05030101 ed.3 average used bandwidth 50332709 VS.ATMUlTotal.4 ATM physical port uplink total WRFD-05030101 bandwidth 50332710 VS.ATMUlMaxUs ATM physical port_4 uplink ed.4 maximum used bandwidth 50332711 VS.ATMUlAvgUs ATM physical port_4 uplink ed.4 average used bandwidth WRFD-05030101 WRFD-05030101

50332712 VS.ATMDlTotal.4 ATM physical port_4 downlink WRFD-05030101 total bandwidth 50332713 VS.ATMDlMaxUs ATM physical port_4 downlink WRFD-05030101 ed.4 maximum used bandwidth 50332714 VS.ATMDlAvgUs ATM physical port_4 downlink WRFD-05030101 ed.4 average used bandwidth 67182593 VS.SAAL.LnkSer In-Service Duration of SAAL vDur.Time Link WRFD-05030105

67182594 VS.SAAL.FailLnk Number of SAAL Link Failures WRFD-05030105 .AllReasons (All Causes) 67182595 VS.SAAL.FailLnk Number of SAAL Failures .NoRspTimExp (Timer Expires) 67182596 VS.SAAL.FailLnk Number of SAAL Failures .ExcesErr.Rat (Over-High BER) WRFD-05030105

WRFD-05030105

67182597 VS.SAAL.FailLnk Number of SAAL Link Failures WRFD-05030105 .ExcesNoCred (Congestion) 67182598 VS.SAAL.FailLnk Number of SAAL Link .AlignFail Alignment Failures 67182599 VS.SAAL.LnkErr. Number of SAAL Link SDRetransTx MAA-ERROR Indications (SDLOSS_TX) 67182600 VS.SAAL.LnkErr. Number of SAAL Link PDUInval MAA-ERROR Indications (Invalid PDU) 67182601 VS.SAAL.LnkErr. Number of SAAL Link OthReasons MAA-ERROR Indications (Others) WRFD-05030105

WRFD-05030105

WRFD-05030105

WRFD-05030105

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-2

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID WRFD-05030105

Feature Name Permanent AAL5 Connections for Control Plane Traffic Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface

67182602 VS.SAAL.LnkErr. Number of SAAL Link RetransFail MAA-ERROR Indications Received (Unsuccessful Retransmission)

67183361 VS.QAAL2.ERQ. Number of AAL2 Connection WRFD-05030104 Tx Establishment Requests Sent by the QAAL2 67183362 VS.QAAL2.ERQ. Number of AAL2 Connection Rx Establishment Requests Received by the QAAL2 WRFD-05030104

67183363 VS.QAAL2.Est.R Number of AAL2 Connection WRFD-05030104 LC.Rx Release Confirmations (RLCs) Received by the QAAL2 After the QAAL2 Sends the ERQ Message 67183364 VS.QAAL2.Est.E Number of ECF Messages WRFD-05030104 CF.Rx Received by the QAAL2 After the QAAL2 Sends the ERQ Message 67183365 VS.QAAL2.Est.E Number of ECF Messages CF.Tx Sent by the QAAL2 After the QAAL2 Receives the ERQ Message 67183366 VS.QAAL2.Est.R Number of RLC Messages LC.Tx Sent by the QAAL2 After the QAAL2 Receives the ERQ Message WRFD-05030104

Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface

WRFD-05030104

67183367 VS.QAAL2.Rel.T Number of AAL2 Connection WRFD-05030104 x Release Requests (RELs) Sent by the QAAL2 67183368 VS.QAAL2.Rel.R Number of AAL2 Connection x Release Requests (RELs) Received by the QAAL2 WRFD-05030104

67183369 VS.QAAL2.Rel.R Number of AAL2 Connection WRFD-05030104 LC.Rx Release Confirmations (RLCs) Received by the QAAL2 After the QAAL2 Sends the REL Message 67183370 VS.QAAL2.Rel.R Number of RLC Messages LC.Tx Sent by the QAAL2 After the QAAL2 Receives the REL Message WRFD-05030104

Dynamic AAL2 Connections in Iub/IuCS/Iur Interface

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-3

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID WRFD-05030106

Feature Name Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface

67190053 VS.AAL2.CAC.At Number of AAL2 Path t Resource Admissions 67190054 VS.AAL2.CAC.S Number of Successful AAL2 ucc Path Admissions

WRFD-05030106

67190055 VS.QAAL2.Est.R Number of RLC Messages WRFD-05030104 LC.NoRoute.Rx Received by the QAAL2 Due to No Route at the Remote End 67190056 VS.QAAL2.Est.R Number of RLC Messages WRFD-05030104 LC.NoPath.Rx Received by QAAL2 Due to No AAL2 Path Configued at the Remote End 67190057 VS.QAAL2.Est.R Number of RLC Messages WRFD-05030104 LC.NoCID.Rx Received by QAAL2 Due to No CID Available at the Remote End 67190058 VS.QAAL2.Est.R Number of RLC Messages WRFD-05030104 LC.Fail.Rx Received by QAAL2 Due to Remote Network Fault, Remote Temporary Failure, or Remote Normal Releases 67190059 VS.QAAL2.Est.R Number of RLC Messages LC.Cong.Rx Received by QAAL2 Due to Switch Congestion at the Remote End 67190060 VS.QAAL2.Est.R Number of RLC Messages LC.RecovOut.Rx Received by QAAL2 Due to Timer Expiry at the Remote End WRFD-05030104

Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface

WRFD-05030104

67190061 VS.QAAL2.Est.R Number of RLC Messages WRFD-05030104 LC.NoRoute.Tx Sent by the QAAL2 Due to No Route at the Remote End 67190062 VS.QAAL2.Est.R Number of RLC Messages WRFD-05030104 LC.NoPath.Tx Sent by the QAAL2 Due to No AAL2 Path Configured 67190063 VS.QAAL2.Est.R Number of RLC Messages WRFD-05030104 LC.NoCID.Tx Sent by the QAAL2 Due to No CID Available 67190064 VS.QAAL2.Est.R Number of RLC Messages WRFD-05030104 LC.Fail.Tx Sent by the QAAL2 Due to Network Failure, Unspecified Reason, or Temporary Failure

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-4

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID

Feature Name Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic

67190065 VS.QAAL2.Est.R Number of RLC Messages WRFD-05030104 LC.Cong.Tx Sent by QAAL2 Due to Switch Congestion 67190066 VS.QAAL2.Est.R Number of RLC Messages LC.RecovOut.Tx Sent by QAAL2 Due to Timer Expiry 67190067 VS.QAAL2.RxMo Number of AAL2 Connection dRej Modification Rejections (MORs) Received by the QAAL2 67190068 VS.QAAL2.TxMo Number of MOR Messages dRej Sent by the QAAL2 After the QAAL2 Receives the MOD Message WRFD-05030104

WRFD-05030104

WRFD-05030104

67190490 VS.UNILNK.RXC Number of Cells Received on a WRFD-05030101 ELLS UNI Link 67190491 VS.UNILNK.TXC Number of Cells Transmitted ELLS on a UNI Link WRFD-05030101

67190553 VS.QAAL2.TxMo Number of AAL2 Connection WRFD-05030104 d Modification Requests (MODs) Sent by the QAAL2 67190554 VS.QAAL2.RxMo Number of AAL2 Connection WRFD-05030104 d Modification Requests (MODs) Received by the QAAL2 67190555 VS.QAAL2.Alloce Mean Forward Bandwidth of dFwd.AAL2BitRat AAL2 Path Allocated to an e Adjacent Node WRFD-05030106

67190558 VS.QAAL2.Alloce Mean Backward Bandwidth of WRFD-05030106 dBwd.AAL2BitRa AAL2 Path Allocated to an te Adjacent Node 67190562 VS.QAAL2.Alloce Maximum Value of AAL2 Path WRFD-05030106 dMaxFwd.AAL2B Forward Bandwidth Allocated itRate.Value to an Adjacent Node 67190565 VS.QAAL2.Alloce Maximum Value of AAL2 Path WRFD-05030106 dMaxBwd.AAL2B Backward Bandwidth Allocated itRate.Value to an Adjacent Node 67190615 VS.AAL5.SAALL Number of Bytes Received by WRFD-05030105 nk.BytesRx SAAL Link 67190616 VS.AAL5.SAALL Number of Bytes Sent by SAAL WRFD-05030105 nk.BytesTx Link

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-5

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID WRFD-05030106

Feature Name Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface

67193215 VS.IMAGRP.Allo Maximum Occupied Forward ced.Max.Fwd Bandwidth of an IMA Group

67193216 VS.IMAGRP.Allo Maximum Occupied Backward WRFD-05030106 ced.Max.Bwd Bandwidth of an IMA Group 67193217 VS.IMAGRP.Fwd Number of Forward WRFD-05030106 .Cong Congestions on an IMA Group 67193218 VS.IMAGRP.Fwd Duration of Forward WRFD-05030106 .Cong.Dur Congestions on an IMA Group 67193219 VS.IMAGRP.Bwd Number of Backward WRFD-05030106 .Cong Congestions on an IMA Group 67193220 VS.IMAGRP.Bwd Duration of Backward WRFD-05030106 .Cong.Dur Congestions on an IMA Group 67193235 VS.UNILNK.Alloc Maximum Forward Bandwidth WRFD-05030106 ed.Max.Fwd Allocated for UNI Link 67193236 VS.UNILNK.Alloc Maximum Backward Bandwidth WRFD-05030106 ed.Max.Bwd Allocated for UNI Link 67193237 VS.UNILNK.Fwd. Number of UNI Link Forward Cong Congestions 67193238 VS.UNILNK.Fwd. Duration of UNI Link Forward Cong.Dur Congestions WRFD-05030106

WRFD-05030106

67193239 VS.UNILNK.Bwd. Number of UNI Link Backward WRFD-05030106 Cong Congestions 67193240 VS.UNILNK.Bwd. Duration of UNI Link Backward WRFD-05030106 Cong.Dur Congestions 67193989 VS.FRACATMLN Number of Cells Transmitted K.TXCELLS on an Fractional ATM Link 67193991 VS.FRACATMLN Number of Cells Received on K.RXCELLS an Fractional ATM Link WRFD-050302

WRFD-050302

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-6

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID

Feature Name Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface

67193993 VS.FRACATMLN Number of Error Cells WRFD-050302 K.RXHCSERRC Received on an Fractional ATM ELLS Link 67193994 VS.FRACATMLN Number of Cells Discarded on WRFD-050302 K.RXDROPPED an Fractional ATM Link CELLS 67193995 VS.FRACATMLN Maximum Transmit Rate of an WRFD-050302 K.TXMAXSPEED Fractional ATM Link 67193996 VS.FRACATMLN Minimum Transmit Rate of an WRFD-050302 K.TXMINSPEED Fractional ATM Link 67193997 VS.FRACATMLN Mean Transmit Rate of an K.TXMEANSPEE Fractional ATM Link D WRFD-050302

67193998 VS.FRACATMLN Maximum Receive Rate of an WRFD-050302 K.RXMAXSPEED Fractional ATM Link 67193999 VS.FRACATMLN Minimum Receive Rate of an K.RXMINSPEED Fractional ATM Link 67194000 VS.FRACATMLN Mean Receive Rate of an K.RXMEANSPEE Fractional ATM Link D 67194002 VS.FRACIMALN Number of User Cells K.TXUSERCELL Transmitted on an Fractional S IMA Link 67194003 VS.FRACIMALN Number of Filling Cells K.TXSTUFFCEL Transmitted on an Fractional LS IMA Link 67194005 VS.FRACIMALN Number of Cells Received on K.RXUSERCELL an Fractional IMA Link S WRFD-050302

WRFD-050302

WRFD-050302

WRFD-050302

WRFD-050302

67194006 VS.FRACIMALN Number of Filling Cells WRFD-050302 K.RXSTUFFCEL Received on an Fractional IMA LS Link 67194008 VS.FRACIMALN Number of Cells Discarded on WRFD-050302 K.RXDROPPED an Fractional IMA Link CELLS 67194009 VS.FRACIMALN Number of Error Cells WRFD-050302 K.RXHCSERRC Received on an Fractional IMA ELLS Link

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-7

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID

Feature Name Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface

67194010 VS.FRACIMALN Maximum Transmit Rate of an WRFD-050302 K.TXMAXSPEED Fractional IMA Link 67194011 VS.FRACIMALN Minimum Transmit Rate of an WRFD-050302 K.TXMINSPEED Fractional IMA Link 67194012 VS.FRACIMALN Mean Transmit Rate of an K.TXMEANSPEE Fractional IMA Link D WRFD-050302

67194013 VS.FRACIMALN Maximum Receive Rate of an WRFD-050302 K.RXMAXSPEED Fractional IMA Link 67194014 VS.FRACIMALN Minimum Receive Rate of an K.RXMINSPEED Fractional IMA Link 67194015 VS.FRACIMALN Mean Receive Rate of an K.RXMEANSPEE Fractional IMA Link D WRFD-050302

WRFD-050302

67194017 VS.IMAGROUP. Number of User Cells Received WRFD-050304 RXUSERCELLS on an IMA Group

67194018 VS.IMAGROUP. Number of Filling Cells RXSTUFFCELLS Received on an IMA Group

WRFD-050304

67194020 VS.IMAGROUP. Number of decoupling WRFD-050304 RXFILLERCELL Cells(Idle Cells Received when S There Is No Cell to Transmit) Received on an IMA Group 67194021 VS.IMAGROUP. Number of User Cells WRFD-050304 TXUSERCELLS Transmitted on an IMA Group

67194022 VS.IMAGROUP. Number of Filling Cells WRFD-050304 TXSTUFFCELLS Transmitted on an IMA Group

67194024 VS.IMAGROUP. Number of Decoupling WRFD-050304 TXFILLERCELLS Cells(Idle Cells Received when There Is No Cell to Transmit) Transmitted on an IMA Group

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-8

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID

Feature Name IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface

67194025 VS.IMAGROUP. Number of Cells Discarded in WRFD-050304 TXDISCARD Transmission on an IMA Group

67194026 VS.IMAGROUP. Number of Cells Discarded in WRFD-050304 RXDROP Reception on an IMA Group

67194027 VS.IMAGROUP. Number of Error Cells WRFD-050304 TXERRORCELL Transmitted on an IMA Group S 67194028 VS.IMAGROUP. Number of Error Cells RXERRORCELL Received on an IMA Group S WRFD-050304

67194029 VS.IMALNK.RXU Number of User Cells Received WRFD-050304 SERCELLS on an IMA Link

67194030 VS.IMALNK.RXU Number of Filling Cells STUFFCELLS Received on an IMA Link

WRFD-050304

67194032 VS.IMALNK.RXI Number of idle Cells Received WRFD-050304 DLECELLS on an IMA Link

67194033 VS.IMALNK.TXU Number of User Cells SERCELLS Transmitted on an IMA Link

WRFD-050304

67194034 VS.IMALNK.TXU Number of Filling Cells STUFFCELLS Transmitted on an IMA Link

WRFD-050304

67194036 VS.IMALNK.RXFI Number of User Cells WRFD-050304 LTERCELLS Discarded on an IMA Link Due to Errors in the Link 67194037 VS.IMALNK.RXA Number of Cells with Frame NOMALY synchronization Error on an IMA Link WRFD-050304

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-9

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID WRFD-050304

Feature Name IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic

67194038 VS.IMALNK.RXI Number of Cells with Error CPVIOLATE ICP(IMA Control Protocol) Received on an IMA Link 67194039 VS.IMALNK.RXI Number of Cells with valid CPCELLS ICP(IMA Control Protocol) Received on an IMA Link

WRFD-050304

67194040 VS.IMALNK.RXH Number of Cells with WRFD-050304 CSERROR HCS(Header Check Sum) Error Received on an IMA Link 67194041 VS.IMALNK.RXFI Number of decoupling WRFD-050304 LLERCELLS Cells(Idle Cells Received when There Is No Cell to Transmit) Received on an IMA Link 67194042 VS.IMALNK.FAU Number of Times that a Fault LTEMIT Occurs in an IMA Link WRFD-050304

67194043 VS.IMALNK.FAU Number of Times that a Fault is WRFD-050304 LTCLEAR Cleared in an IMA Link

67194044 VS.IMALNK.FAU Duration of Faults in an IMA LTTIME Link

WRFD-050304

67194049 VS.UNILNK.RXH Number of Error Cells CSERRCELLS Received on a UNI Link

WRFD-05030101

67194050 VS.UNILNK.RXD Number of Cells Discarded on WRFD-05030101 ROPS a UNI Link 67194073 VS.IPOALNK.RX Number of Correct Cells CORRECTCELL Received on the IPoA Link S WRFD-05030105

67194074 VS.IPOALNK.RX Number of Bytes Received on WRFD-05030105 BYTES an IPoA Link 67194076 VS.IPOALNK.TX Number of Correct Cells CORRECTCELL Transmitted on an IPoA Link S WRFD-05030105

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-10

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID

Feature Name Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface

67194077 VS.IPOALNK.TX Number of Bytes Transmitted WRFD-05030105 BYTES on an IPoA Link 67194079 VS.IPOALNK.DR Number of Cells Discarded on WRFD-05030105 OPFORHEADCE an IPoA Link Due to Packet LLS Header Error 67194080 VS.IPOALNK.DR Number of Cells Discarded on WRFD-05030105 OPFORRXOVER an IPoA Link Due to the FLOWCELLS Overflow of the input Buffer 67194081 VS.IPOALNK.DR Number of Cells Discarded on WRFD-05030105 OPFORTXOVER an IPoA Link Due to the FLOWCELLS Overflow of the output Buffer 67194097 VS.AAL2PATH.P Number of Cells Received on VCLAYER.RXCO the ATM Layer of the AAL2 RRECTCELLS Path WRFD-05030104

67194098 VS.AAL2PATH.P Number of Bytes Received on WRFD-05030104 VCLAYER.RXBY the ATM Layer of the AAL2 TES Path 67194099 VS.AAL2PATH.P Peak Number of Bytes WRFD-05030104 VCLAYER.PEAK. Received on the ATM Layer of RXBYTES the AAL2 Path 67194100 VS.AAL2PATH.P Number of Cells Transmitted WRFD-05030104 VCLAYER.TXCO on the ATM Layer of the AAL2 RRECTCELLS Path 67194101 VS.AAL2PATH.P Number of Bytes Transmitted WRFD-05030104 VCLAYER.TXBY on the ATM Layer of the AAL2 TES Path 67194102 VS.AAL2PATH.P Peak Number of Bytes WRFD-05030104 VCLAYER.PEAK. Transmitted on the ATM Layer TXBYTES of the AAL2 Path 67194103 VS.AAL2PATH.P Number of Bytes of AAL2 WRFD-05030104 VCLAYER.RXBY CPS(Common Part Sublayer) TESOFAAL2CPS Packets Received on the ATM PKTS Layer of the AAL2 Path 67194104 VS.AAL2PATH.P Number of Bytes of AAL2 WRFD-05030104 VCLAYER.TXBY CPS(Common Part Sublayer) TESOFAAL2CPS Packets Transmitted on the PKTS ATM Layer of the AAL2 Path 67194105 VS.AAL2PATH.P Number of Cells Discarded on WRFD-05030104 VCLAYER.DROP the ATM Layer of the AAL2 FORHEADCELL Path Due to Incorrect Header S

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-11

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID

Feature Name Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface

67194106 VS.AAL2PATH.P Number of Cells Discarded on WRFD-05030104 VCLAYER.DROP the ATM Layer of the AAL2 FORRXOVERFL Path Due to Overflow of OWCELLS Receive Buffer 67194107 VS.AAL2PATH.P Number of Cells Discarded on WRFD-05030104 VCLAYER.DROP the ATM Layer of the AAL2 FORTXOVERFL Path Due to Overflow of OWCELLS Transmit Buffer 67194334 VS.ELECT.COD T7016:Number of Cells with EVIOLATE Error Codes in the E1/T1 Electronical Port GBFD-111203 WRFD-05030101

67194335 VS.ELECT.FRA T7020:Number of Cells with GBFD-111203 MINGERROR Error Frame Delimitation in the WRFD-05030101 E1/T1 Electronical Port 67194336 VS.ELECT.CRC T7024:Number of Cells with ERROR CRC Error in the E1/T1 Electronical Port 67194337 VS.ELECT.EBIT T7028:Number of Cells with ERROR Ebit Error in the E1/T1 Electronical Port 67194338 VS.ELECT.SA6E T7032:Number of Cells with RROR Sa6 Error in the E1/T1 Electronical Port GBFD-111203 WRFD-05030101 GBFD-111203 WRFD-05030101 GBFD-111203 WRFD-05030101

67194341 VS.ELECT.FAUL T7035:Duration of Faults in the GBFD-111203 TTIME E1/T1 Electronical Port WRFD-05030101 67194342 VS.ELECT.MULT T7036:Number of Multiframes GBFD-111203 IFRAME on the E1/T1 Electronical Port WRFD-05030101 67194343 VS.ELECT.RXFL T7037:Traffic Received on the GBFD-111203 OWCAPACITY E1/T1 Electronical Port WRFD-05030101 67194344 VS.ELECT.TXFL T7038:Traffic Transmitted on OWCAPACITY the E1/T1 Electronical Port GBFD-111203 WRFD-05030101 GBFD-111203 WRFD-05030101

67194347 VS.ELECT.FRA T7039:Number of Frame MEALIGNCHAN Alignment Changes of the GED E1/T1 Electronical Port

67194494 VS.VCCROSS.R Number of Bytes Received on WRFD-05030101 XBYTES a VC Cross Connection

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-12

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID

Feature Name ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface

67194495 VS.VCCROSS.T Number of Bytes Transmitted WRFD-05030101 XBYTES on a VC Cross Connection 67194496 VS.VCCROSS.R Number of Cells Received on a WRFD-05030101 XCELLS VC Cross Connection 67194497 VS.VCCROSS.T Number of Cells Transmitted XCELLS on a VC Cross Connection WRFD-05030101

67194498 VS.VCCROSS.R Number of Cells with WRFD-05030101 XHCSERRCELL HCS(Header Check Sum) S Errors Received on a VC Cross Connection 67194499 VS.VCCROSS.R Number of Cells Discarded in WRFD-05030101 XDROPCELLS the Receiving Direction of a VC Cross Connection Due to the Congestion of the ATM Layer 67194500 VS.VCCROSS.R Number of Cells Discarded on WRFD-05030101 XOVERFLOWDR a VC Cross Connection Due to OPCELLS the Overflow of the Receiving Buffer 67194501 VS.VCCROSS.R Number of Cells with rectifiable WRFD-05030101 XRECTIFIABLEH HEC Errors Received on a VC ECERRCELLS Cross Connection 67194502 VS.VCCROSS.R Number of Cells with XUNRECTIFIABL Unrectifiable HEC Errors EHECERRCELL Received on a VC Cross S Connection 67194503 VS.VCCROSS.T Number of Cells Discarded XOVERFLOWDR Because of Sending Buffer OPCELLS Overflow on a VC Cross Connection 67194504 VS.VCCROSS.T Number of Cells Abnormally XDROPCELLS Discarded on a VC Cross Connection WRFD-05030101

ATM over E1T1 on Iub Interface

ATM over E1T1 on Iub Interface

ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface

WRFD-05030101

ATM over E1T1 on Iub Interface

WRFD-05030101

ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface

67194505 VS.VCCROSS.T Number of Overflow Cells on a WRFD-05030101 XOVERFLOWCE VC Cross Connection LLS 67194506 VS.VCCROSS.T Maximum Transmit Rate of a XMAXSPEED VC Cross Connection 67194507 VS.VCCROSS.T Minimum Transmit Rate of a XMINSPEED VC Cross Connection WRFD-05030101 WRFD-05030101

67194508 VS.VCCROSS.T Average Transmit Rate of a VC WRFD-05030101 XMEANSPEED Cross Connection

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-13

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID WRFD-05030101

Feature Name ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface

67194509 VS.VCCROSS.R Maximum Receive Rate of a XMAXSPEED VC Cross Connection

67194510 VS.VCCROSS.R Minimum Receive Rate of a VC WRFD-05030101 XMINSPEED Cross Connection 67194511 VS.VCCROSS.R Average Receive Rate of a VC WRFD-05030101 XMEANSPEED Cross Connection 67194612 VS.QAAL2PART. Number of AAL2 Connection WRFD-05030104 Est.RLC.Fail.Rx Release Confirmations Received by QAAL2 on Dual-Stack Adjacent Node Due to Remote Network Fault, Remote Temporary Failure, or Remote Normal Releases 67194771 VS.SAALLNK.PV Number of Bytes Transmitted WRFD-05030105 CLAYER.TXBYT on an SAAL Link ATM Layer ES 67194773 VS.SAALLNK.PV Number of Bytes Received on WRFD-05030105 CLAYER.RXBYT an SAAL Link ATM Layer ES 67194775 VS.SAALLNK.PV Number of Correct Packets CLAYER.RXCOR Received on an SAAL Link RECTPKTS ATM Layer 67194776 VS.SAALLNK.PV Number of Correct Packets CLAYER.TXCOR Transmitted on an SAAL Link RECTPKTS ATM Layer WRFD-05030105

Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic

WRFD-05030105

67194777 VS.SAALLNK.PV Number of Cells Discarded on WRFD-05030105 CLAYER.DROPF an SAAL Link ATM Layer Due ORCNTERRCEL to Incorrect content LS 67194778 VS.SAALLNK.PV Number of Cells Discarded on WRFD-05030105 CLAYER.DROPF an SAAL Link ATM Layer Due ORLENERRCEL to Incorrect Packet length LS 67194779 VS.SAALLNK.PV Number of Bytes in Correct WRFD-05030105 CLAYER.RXBYT AAL2 CPS Packets Received ESOFAAL5CPSP on an SAAL Link ATM Layer KTS 67194780 VS.SAALLNK.PV Number of Bytes in Correct CLAYER.TXBYT AAL2 CPS Packets ESOFAAL5CPSP Transmitted on an SAAL Link KTS ATM Layer WRFD-05030105

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-14

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID

Feature Name Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Call Admission Based on Used AAL2 Path Bandwidth

67194781 VS.SAALLNK.PV Number of Cells Discarded on WRFD-05030105 CLAYER.RXOVE an SAAL Link ATM Layer Due RFLOWDROPPE to the Overflow of the DCELLS Receiving Buffer 67194782 VS.SAALLNK.PV Number of Cells Discarded on WRFD-05030105 CLAYER.TXOVE an SAAL Link ATM Layer Due RFLOWDROPPE to the Overflow of the DCELLS Transmitting Buffer 67195595 VS.AAL2PATH.F Number of Forward WRFD-05030106 wd.Cong Congestions on the AAL2 Path 67195596 VS.AAL2PATH.F Duration of Forward WRFD-05030106 wd.Cong.Dur Congestions on the AAL2 Path 67195597 VS.AAL2PATH.B Number of Backward WRFD-05030106 wd.Cong Congestions on the AAL2 Path 67195598 VS.AAL2PATH.B Duration of Backward WRFD-05030106 wd.Cong.Dur Congestions on the AAL2 Path 67195938 VS.FRACATMLN Maximum Occupied Forward WRFD-050302 K.Alloced.Max.F Bandwidth of an FRA ATM Link wd 67195939 VS.FRACATMLN Maximum Occupied Backward WRFD-050302 K.Alloced.Max.B Bandwidth of an FRA ATM Link wd 67195940 VS.FRACATMLN Number of Forward K.Fwd.Cong Congestions on an FRA ATM Link 67195941 VS.FRACATMLN Duration of Forward K.Fwd.Cong.Dur Congestions on an FRA ATM Link 67195942 VS.FRACATMLN Number of Backward K.Bwd.Cong Congestions on an FRA ATM Link 67195943 VS.FRACATMLN Duration of Backward K.Bwd.Cong.Dur Congestions on an FRA ATM Link WRFD-050302

WRFD-050302

WRFD-050302

WRFD-050302

67196149 VS.QAAL2.Est.R Number of RLC Messages WRFD-05030106 LC.NoBitRate.Tx Sent by the QAAL2 Due to No Bandwidth Available

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-15

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID

Feature Name Permanent AAL5 Connections for Control Plane Traffic Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface ATM over E1T1 on Iub Interface

67196153 VS.SAAL.LnkErr. Number of Packets Discarded WRFD-05030105 BufferLoss by SAAL Link Due to Buffer Congestion 67196319 VS.ATMLGCPRT Maximum Forward Bandwidth WRFD-05030104 .Alloced.Max.Fwd Assigned to the ATM Logical Port 67196320 VS.ATMLGCPRT Maximum Backward Bandwidth WRFD-05030104 .Alloced.Max.Bw Assigned to the ATM Logical d Port 67196321 VS.ATMLGCPRT Number of Forward .Fwd.Cong Congestions on the ATM Logical Port 67196322 VS.ATMLGCPRT Duration of Forward .Fwd.Cong.Dur Congestions on the ATM Logical Port 67196323 VS.ATMLGCPRT Number of Backward .Bwd.Cong Congestions on the ATM Logical Port 67196324 VS.ATMLGCPRT Duration of Backward .Bwd.Cong.Dur Congestions on the ATM Logical Port 67199677 VS.QAAL2.Act.C Number of Active AAL2 on Connections to an QAAL2 Adjacent Node WRFD-05030104

WRFD-05030104

WRFD-05030104

WRFD-05030104

WRFD-05030104

67202907 VS.IMA.Grp.Mea Mean Receive Rate of an IMA WRFD-050304 nKbps.Rx Group

67202908 VS.IMA.Grp.Mea Mean Transmit Rate of an IMA WRFD-050304 nKbps.Tx Group

67202909 VS.IMA.Lnk.Mea Mean Receive Rate of an IMA WRFD-050304 nKbps.Rx Link

67202910 VS.IMA.Lnk.Mea Mean Transmit Rate of an IMA WRFD-050304 nKbps.Tx Link

67202915 VS.UNI.Lnk.Mea Average Rate of Receiving nKbps.Rx Cells a UNI Link

WRFD-05030101

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-16

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID

Feature Name ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface ATM over E1T1 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth Call Admission Based on Used AAL2 Path Bandwidth IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface Permanent AAL5 Connections for Control Plane Traffic

67202916 VS.UNI.Lnk.Mea Average Rate of Transmitting WRFD-05030101 nKbps.Tx Cells on a UNI Link 67202976 VS.UNILNK.PEA Maximum Rate of Receiving K.RXRATE Cells on a UNI Link WRFD-05030101

67202977 VS.UNILNK.PEA Maximum Rate of Transmitting WRFD-05030101 K.TXRATE Cells on a UNI Link 67203408 VS.IMALNK.PEA Maximum Cell Receive Rate of WRFD-050304 K.RXRATE an IMA Link

67203409 VS.IMALNK.PEA Maximum Cell Transmit Rate of WRFD-050304 K.TXRATE an IMA Link

67204192 VS.IMAGRP.Allo Mean Occupied Forward ced.Ave.Fwd Bandwidth of an IMA Group 67204193 VS.IMAGRP.Allo Mean Occupied Backward ced.Ave.Bwd Bandwidth of an IMA Group 67204196 VS.UNILNK.Alloc Mean Forward Bandwidth ed.Ave.Fwd Allocated for UNI Link 67204197 VS.UNILNK.Alloc Mean Backward Bandwidth ed.Ave.Bwd Allocated for UNI Link 67204206 VS.AAL2PATH.A Number of Active AAL2 ct.Con Connections to an Adjacent Node

WRFD-05030106

WRFD-05030106

WRFD-05030106

WRFD-05030106

WRFD-05030106

67204457 VS.IMAGROUP. Maximum Receive Rate of an WRFD-050304 PEAK.RXRATE IMA GROUP

67204458 VS.IMAGROUP. Maximum Transmit Rate of an WRFD-050304 PEAK.TXRATE IMA Group

67204471 VS.IPOALNK.PE Maximum Receive Rate of an WRFD-05030105 AK.RXRATE IPoA Link

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-17

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID

Feature Name Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic Permanent AAL5 Connections for Control Plane Traffic O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface Fractional ATM Function on Iub Interface Fractional ATM Function on Iub Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Dynamic AAL2 Connections in Iub/IuCS/Iur Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface

67204472 VS.IPOALNK.PE Maximum Transmit Rate of an WRFD-05030105 AK.TXRATE IPoA Link 67204473 VS.SAALLNK.PV Maximum Transmit Rate of CLAYER.PEAK.T SAAL Link ATM Layer XRATE WRFD-05030105

67204474 VS.SAALLNK.PV Maximum Receive Rate of an WRFD-05030105 CLAYER.PEAK. SAAL Link ATM Layer RXRATE 67204488 VS.ELECT.COD T7017:Rate of Cells with Error GBFD-111203 EVIOLATE.Rate. Codes in the E1/T1 Electronical WRFD-05030101 Mean Port 67204489 VS.ELECT.FRA T7021:Rate of Cells with GBFD-111203 MINGERROR.Ra Frame Delimitation Error in the WRFD-05030101 te.Mean E1/T1 Electronical Port 67204490 VS.ELECT.CRC T7025:Rate of Cells with CRC GBFD-111203 ERROR.Rate.Me Error in the E1/T1 Electronical WRFD-05030101 an Port 67204491 VS.ELECT.EBIT T7029:Rate of Cells with Ebit GBFD-111203 ERROR.Rate.Me Error in the E1/T1 Electronical WRFD-05030101 an Port 67204779 VS.FRACATMLN Mean Occupied Forward WRFD-050302 K.Alloced.Ave.Fw Bandwidth of an FRA ATM Link d 67204780 VS.FRACATMLN Mean Occupied Backward WRFD-050302 K.Alloced.Ave.Bw Bandwidth of an FRA ATM Link d 67204858 VS.ATMLGCPRT Mean Backward Bandwidth .Alloced.Ave.Bwd Assigned to the ATM Logical Port 67204859 VS.ATMLGCPRT Mean Forward Bandwidth .Alloced.Ave.Fwd Assigned to the ATM Logical Port 73403242 VS.E1T1.ES.ES T7001:E1/T1 Error Seconds WRFD-05030104

WRFD-05030104

GBFD-111203 WRFD-05030101

73403243 VS.E1T1.ES.SES T7002:E1/T1 Severely Error Seconds

GBFD-111203 WRFD-05030101

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-18

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID GBFD-111203 WRFD-05030101 GBFD-111203 WRFD-05030101

Feature Name O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface ATM over Non-channelized STM-1/OC-3c on Iub/Iu/Iur Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface

73403244 VS.E1T1.ES.UA T7003:E1/T1 Unavailable S Seconds

73403245 VS.E1T1.ES.BBE T7004:Number of E1/T1 Background Error Blocks

73403645 VS.E1T1.ES.TES T7010:Number of Seconds with GBFD-111203 Error Codes Transmitted over WRFD-05030101 E1/T1 73403646 VS.E1T1.ES.TSE T7011:Number of Seconds with GBFD-111203 S Severely Error Codes WRFD-05030101 Transmitted over E1/T1 73403647 VS.E1T1.ES.TBB T7012:Number of Background GBFD-111203 E Error Blocks Transmitted over WRFD-05030101 E1/T1 73404129 VS.CHANNELIZ T7247:Duration of Faults on ED.FAULTTIME the Channelized Optical Port GBFD-111203 WRFD-050304

73404139 VS.NONCHANN T7222:Duration of Faults on ELIZED.FAULTTI the Optical Port ME 73415654 VS.E1T1.ES.ES T7005:E1/T1 Error Second R Rate

WRFD-05030103

GBFD-111203 WRFD-05030101 GBFD-111203 WRFD-05030101 GBFD-111203 WRFD-05030101 GBFD-111203 WRFD-05030101

73415655 VS.E1T1.ES.SES T7006:E1/T1 Severely Error R Second Rate

73415656 VS.E1T1.ES.UA T7007:E1/T1 Unavailable SR Second Rate

73415657 VS.E1T1.ES.BBE T7008:E1/T1 Background R Block Error Rate

73415827 VS.E1T1.ES.TES T7013:Second Rate with Error GBFD-111203 R Codes Transmitted over E1/T1 WRFD-05030101

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-19

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID GBFD-111203 WRFD-05030101

Feature Name O&M of BSC ATM over E1T1 on Iub Interface O&M of BSC ATM over E1T1 on Iub Interface ATM over Non-channelized STM-1/OC-3c on Iub/Iu/Iur Interface ATM over Non-channelized STM-1/OC-3c on Iub/Iu/Iur Interface ATM over Non-channelized STM-1/OC-3c on Iub/Iu/Iur Interface ATM over Non-channelized STM-1/OC-3c on Iub/Iu/Iur Interface ATM over Non-channelized STM-1/OC-3c on Iub/Iu/Iur Interface ATM over Non-channelized STM-1/OC-3c on Iub/Iu/Iur Interface ATM over Non-channelized STM-1/OC-3c on Iub/Iu/Iur Interface ATM over Non-channelized STM-1/OC-3c on Iub/Iu/Iur Interface ATM over Non-channelized STM-1/OC-3c on Iub/Iu/Iur Interface

73415828 VS.E1T1.ES.TSE T7014:Second Rate with SR Severely Error Codes Transmitted over E1/T1

73415829 VS.E1T1.ES.TBB T7015:Error Rate of GBFD-111203 ER Background Block Transmitted WRFD-05030101 over E1/T1 73416121 VS.NONCHANN T7214:Number of Cells ELIZED.RXCELL Received on the Optical Port S WRFD-05030103

73416122 VS.NONCHANN T7217:Number of Cells WRFD-05030103 ELIZED.TXCELL Transmitted on the Optical Port S 73416123 VS.NONCHANN T7225:Highest Transmit Rate WRFD-05030103 ELIZED.TXMAXS over the Optical Port PEED 73416124 VS.NONCHANN T7226:Lowest Transmit Rate ELIZED.TXMINS over the Optical Port PEED 73416125 VS.NONCHANN T7227:Mean Transmit Rate ELIZED.TXMEA over the Optical Port NSPEED 73416126 VS.NONCHANN T7230:Highest Receive Rate ELIZED.RXMAX over the Optical Port SPEED 73416127 VS.NONCHANN T7231:Lowest Receive Rate ELIZED.RXMINS over the Optical Port PEED 73416128 VS.NONCHANN T7232:Mean Receive Rate ELIZED.RXMEA over the Optical Port NSPEED WRFD-05030103

WRFD-05030103

WRFD-05030103

WRFD-05030103

WRFD-05030103

73416129 VS.UOI.RXMAXS T7236:Maximum Receive Rate WRFD-05030103 PEED of UOI board

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-20

WCDMA RAN ATM Transport

7 Counters

Counter Counter Name ID

Counter Description

Feature ID WRFD-05030103

Feature Name ATM over Non-channelized STM-1/OC-3c on Iub/Iu/Iur Interface Permanent AAL5 Connections for Control Plane Traffic

73416130 VS.UOI.TXMAXS T7237:Maximum Transmit PEED Rate of UOI board

73421684 VS.SAAL.LnkErr. Number of SAAL Link SDRetransRx MAA-ERROR Indications (SDLOSS_RX)

WRFD-05030105

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

7-21

WCDMA RAN ATM Transport

8 Glossary

8 Glossary
For the acronyms, abbreviations, terms, and definitions, see the Glossary.

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

8-1

WCDMA RAN ATM Transport

9 Reference Documents

9 Reference Documents
[1] Transmission Resource Management Feature Parameter Description

Issue 01 (2011-03-30)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd

9-1

Potrebbero piacerti anche