Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
TECHNICAL DATA 1
DIN 7504 SELF-DRILLING SCREWS DIN 7500 THREAD ROLLING SCREWS ROLLED THREAD MACHINE SCREWS SCREWS FOR PLASTIC FASTENERS FOR SHEET METAL CD WELD STUDS
DEPTH REF
Self-Tapping Screws
Manufacturing Standards for Head Tolerances
Gimlet point self-tapping screws have various references depending on the standard. BS 4174 referred to as Type AB DIN 7970 referred to as Type B ISO 1478 referred to as Type C
* Max countersunk head diameters are theoretical diameters of head to sharp corners and are the diameter to which holes should be countersunk to enable the screwheads to fit flush with the surface.
Tolerances to BS 4174
158
Tel Fax
TECHNICAL DATA 1
Self Tapping Screws Gimlet Point Self Tapping Screws Blunt Point
Blunt point self-tapping screws have various references depending on the standard. BS 4174 referred to as Type B DIN 7970 referred to as Type BZ ISO 1478 referred to as Type F Gimlet point self-tapping screws have various references depending on the standard. BS 4174 referred to as Type AB DIN 7970 referred to as Type B ISO 1478 referred to as Type C
Self-Tapping Screws
Dimensions in Millimetres
Tel Fax
159
TECHNICAL DATA
CD WELD STUDS
SELF-TAPPING SCREWS
SELF-TAPPING SCREWS
TECHNICAL DATA 1
DIN 7504 SELF-DRILLING SCREWS DIN 7500 THREAD ROLLING SCREWS ROLLED THREAD MACHINE SCREWS SCREWS FOR PLASTIC FASTENERS FOR SHEET METAL CD WELD STUDS BRASS INSERTS FOR PLASTIC TECHNICAL DATA
Self-Tapping Screws
Due to the variety of the hardness of metals and the different operating conditions, it may be found necessary to vary these dimensions which should be used only as a guide.
160
Tel Fax
TECHNICAL DATA 2
DIN 7504 SELF-DRILLING SCREWS
Dimensions in Inches
Dimensions in Millimetres
Tel Fax
161
TECHNICAL DATA
CD WELD STUDS
SELF-TAPPING SCREWS