Sei sulla pagina 1di 3

SC:1920-02

starting

formulation
No. 1019* White Tile-like Coating
EPON Resin 828/EPIKURE Curing Agent 3192
Material Part A EPON Resin 828 Rutile Titanium Dioxide Magnesium Silicate Diatomaceous Silica Thixatrol ST Thixotrope (Rheox Inc.) Toluene (Shell Chemical Co.) Pounds Gallons 369.0 100.0 100.0 50.0 20.0 119.3 758.3 38.00 2.86 4.26 2.61 2.36 16.58 66.67

Formula

Grind above in Cowles Dissolver to 150 F, cool and let down with:

Part B EPIKURE Curing Agent 3192 Composite Blend Part A Part B Parts A and B Viscosity (initial mixed)

260.0

33.33

758.3 260.0 1,018.3

66.67 33.33 100.00 107 K.U.

*Formerly 24-270 White Tile-like Coating Using EPIKURE Curing Agent 892 and EPI-REZ Resin 510.

E P I KOT E

EPON

E P I KUR E

EPI-REZ

H E LOX Y

C A R D U R A

V E O VA

SC:1920-02 / Starting Formulation No. 1019

Page 2

Formula Notes

(A) This system may be readily applied with conventional spray equipment. A Binks Model 62 pressure gun equipped with fluid nozzle 63B, air nozzle 66 PE and needle No. 363A may be used maintaining a line pressure of 45 psi and a cup pressure of 15 psi. The same gun equipped with fluid nozzle 68, air nozzle 68B and needle No. 368 may be used maintaining a line pressure of 35-40 psi and a cup pressure of 7-10 psi. (B) For the ultimate protection of metal substrates, a corrosion resistant primer should be used under the high solids coating. This provides insurance that the entire system will stand up even though the film may be cut through to the metal surface.

Table 1/ Typical Coating Properties


Total Weight Solids, % Total Volume Solids, % PVC, % Pot Life (1 gallon) Volatile Organic Compounds (VOC) Pounds/Gallon Grams/Liter 88.4 84.0 14.5 2 hours 1.19 143

These are starting point formulations and are not proven for use in the users particular application but are simply meant to demonstrate the efficacy of the products and to assist in the development of the users own formulations. It is the users responsibility to fully test and qualify the formulation, along with the ingredients, methods, applications, or equipment identified herein (Information), by the users knowledgeable formulator or scientist, and to determine the appropriate use conditions and legal restrictions, prior to use of any Information.

Resolution Performance Products P.O. Box 4500 Houston, Texas 77210-4500 For product prices, availability, or order placement, call our toll-free customer service number at:

1.877.859.2800
For sales in North and South America outside the United States, call:

1.832.366.2365

For literature and technical assistance, visit our website at:

www.resins.com
SAFETY & HANDLING These products are capable of producing adverse health effects ranging from minor skin irritation to serious systemic effects. Exposure to these materials should be minimized and avoided, if feasible, through the observance of proper precautions, use of appropriate engineering controls and proper personal protective clothing and equipment, and adherence to proper handling procedures. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheet (MSDS) or Preliminary Safety Information Sheet (PSIS) for these and all other products being used are understood by all persons who will work with them. Questions and requests for information on Resolution Performance Products LLC (RPPLLC) products should be directed to your RPPLLC sales representative, or the nearest RPPLLC sales office. Information and MSDSs or PSISs on non-RPPLLC products should be obtained from the respective manufacturer. NOTICE Any of the formulations or the ingredients in the formulations may present an unknown health or safety hazard. These are starting point formulations and are not proven for use in a users particular application. It is the users responsibility to fully test and qualify the formulation, its ingredients, methods, applications, or equipment identified herein (Information), by the users knowledgeable formulator or scientist, and to determine the appropriate use conditions and legal restrictions, prior to use of any Information. Reference to any commercial ingredient, process, or service by trade name, trademark, or manufacturer does not constitute or imply its endorsement, recommendation or favor in the formulation or for use in the users application. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY EXCLUDED AND DISCLAIMED. WITHOUT LIMITATION, NO REPRESENTATION IS MADE AND NO WARRANTY, EXPRESS OR IMPLIED, IS EXTENDED WITH RESPECT TO THE ACCURACY, REPRODUCIBILITY, COMPLETENESS, OR USEFULNESS OF THE INFORMATION TO MEET YOUR REQUIREMENTS, OR WITH RESPECT TO THE TITLE OR MERCHANTIBILITY OF THE INFORMATION PROVIDED, OR THE FITNESS OF THE INFORMATION PROVIDED FOR A PARTICULAR PURPOSE, OR THAT THE USE OF THE INFORMATION IS FREE FROM INFRINGEMENT OF ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHT, AND EACH OF THESE ARE THE SOLE AND EXCLUSIVE RESPONSIBILITY OF THE USER. Use of the Information is at your own risk. No opinion, advice or Information, whether oral or written, obtained by you in any manner from us pertaining to the Information shall create any warranty of any kind. Your reliance on the Information presented herein for use in a particular application shall indicate your consent that in no event will Resolution Performance Products LLC or any of its affiliates be responsible for any damages of any nature whatsoever resulting from the use of or reliance upon the Information.
2002 Resolution Performance Products LLC. All rights reserved. Printed in the U.S.A. SC:1920-02 08/02

E P I KOT E

EPON

E P I KUR E

EPI-REZ

H E LOX Y

C A R D U R A

V E O VA

Potrebbero piacerti anche