Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Now type " program ldram 9fc00000 200000 " The software will first erase the flash
and then it will program it. MAKE SURE you WAIT until it finishes erasing and
programming before you proceed to the next step.
After it has finished;
Type " program 9fc10000 100000 " again it will erase and then program. MAKE
SURE YOU WAIT before proceeding.
After it has finished;
type " program boot " again it will erase the bootloader and then program it. MAKE
SURE YOU WAIT UNTIL IT FINISHES erasing and programming before you proceed.
Now you can reboot your modem, and if all went well; you will be able to access
the webpage by opening an internet browser (firefox Iexplorer etc.) and typing
http://192.168.100.1:666 (666 can be changed within the settings)
That's all folks!!! You now have a nice fresh firmware with tons of features that
pwns sigma (imo)
cd halif
cm_tuner xx (xx its share)
write
cd /
-------------------------------------------To change the annex as our area
-------------------------------------------cd non-vol
cd halif
annex_ # (# = A -> EuroDOCSIS, B -> DOCSIS, C -> more)
cm_annex @ (@ = 1 -> Annex A, 0 -> Annex B, 2 - Annex C, 3 hybrid)
Write
CD /
It is necessary to change the cm_annex if we change the annex.
---------------Activating DOCSIS11
---------------cd non-vol
cd docsis
enable docsis11 true
write
cd /
----------------------------------Set the frequency and channel
----------------------------------cd non-vol
cd docsis
ds_frecuency xxx <- your weightings in mhz
us_channel x <- your number of channel
write
cd /
--------------------------------------------------------------------------------------------------------------------- -----------------turns Off filters modem local subnet to the internal network
--------------------------------------------------------------------------------------------------------------------- -----------------cd snmp
filters off
yes
cd ..
logout
-----------------------del BPI/BPI+ Off BIS / BPI +
------------------------
cd non-vol
cd docsis
enable bpi false
write
cd /
--------------Activating the BPI +
--------------cd non-vol
cd docsis
enable bpi false
bpi_version 1
enable bpi true
write
cd /
-------------BPI Activating the BIS
-------------cd non-vol
cd docsis
enable bpi false
bpi_version 0
enable bpi true
write
cd /
-------------------Change Ethernet MAC
-------------------cd non-vol
cd halif
mac_address 2 aa:bb:cc:dd:ee:ff
-------------Change USB MAC
-------------cd non_vol
cd halif
usb_mac_address aa:bb:cc:dd:ee:ff
UpdateSettings
------------------------------Stop Scanning Frequency
------------------------------cd docsis_ctl
scan_stop
cd /
or
cd cm_hal
scan_stop
cd /
-----------------------------Start Scanning Frequency
-----------------------------cd docsis_ctl
goto_ds 327 (will be 327 Mhz, and if not hitch continues scanning)
cd /
-------------------------diable external TELNET Off
-------------------------cd non-vol
cd msg-log
telnet_ipstacks 2
write
cd /
-----------------Hide System OID
-----------------cd snmp
delete sysDescr
write
cd ..
logout
----------------Clear Log Modems
----------------cd event _log
flush
cd /
----------------------Hide IP Modem
----------------------cd non-vol
cd snmp
hide_ipstack_ifentries true
write
cd /
---------------------------------------------------------------------------------------------------- -SNMP Off to read your modem commands using SNMP
---------------------------------------------------
cd snmp
n2m
y
-----------------------------change the hfc mac 11:22:33:44:55:66
-----------------------------cd \
write_memory 2155776876 0x11
write_memory 2155776877 0x22
write_memory 2155776878 0x33
write_memory 2155776879 0x44
write_memory 2155776880 0x55
write_memory 2155776881 0x66
cd non-vol
write
or
Assuming our MAC address is AA:BB:CC:DD:EE:FF, enter:
write_memory -s 4 0x807e8b98 0xAABBCCDD
write_memory -s 2 0x807e8b9c 0xEEFF
or
cd n/h
mac_address 1 aa:bb:cc:dd:ee:ff
cd ..
write
-------------------------------------change the start up downstream frequence
faster load time
-------------------------------------cd n /d
startup_dsfreq xxxxxx <- mhz u are on ex 711000000
cd ..
write
-----------------------------------------change tftp info
-----------------------------------------cd n/d
enable force_cfgfile true
dhcp_settings
My IP Address: [192.168.100.1] {hit enter}
Subnet Mask: [255.255.255.0] {hit enter}
Router IP Address: [192.168.100.254] {hit enter}
Those are the only 3 that really need to be changed.
Do you want to change the other settings? [no] (hit Y}
TFTP Server IP Address: [10.10.10.254] type in the IP of your TFTP server here
Config file name: [cm.bin] {type config file}