Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
V E N T I L A T I O N
VENTS - CLAMSHELL/LOUVERED
COLLECTOR BOXES
For use with Venturi, Flush Louvered or Trimline Vents. Corrosion-resistant plastic.
ORDER NO. Mfr. No. 101-13411 1341-1
COLLECTOR BOXES
Description Depth For two 3" I.D. hoses 3-7/8" For use with 1494 - 101-14941, 1423, 1424, 1425, 1426, 1496A 101-13421 1342-1 For one 4" I.D. hose 5" For use with 1494 - 101-14941, 1423, 1424, 1496A
COLLECTOR BOXES
For use with plastic louvered vent, with two 3" I.D. wire-supported ventilation hoses. Box fastens to vent with screws or pop rivets, then vent fastens to the deck. Corrosion-resistant plastic.
ORDER NO. Mfr. No. 101-13451 1345-1
Description For two 3" I.D. hoses For use with 1495 - 101-14950, 101-14951
Depth 4"
ORDER NO.106-66399
331290-3
3-5/8"
12"
4-1/2"
12-7/8" 13/16"
1"
11.65 in2
# 6 RH
# 6 RH # 6 RH # 6 RH
530
VENTS
CLAMSHELL VENTILATOR
Chrome Plated Brass Height Base ORDER NO. Dimensions Overall 621-03151 1-5/8" x 1-1/2" 7/16" 621-03152 2" x 2" 9/16" 621-03390 4" x 3-3/4" 1-5/8" Width Overall 7/8" 1-7/8" 2-1/2" Screw Size 4 6 6
LOUVERED VENT
Stamped 304 Stainless (Not Shown)
ORDER NO.
MFR. NO.
(OVERALL) C
VENT AREA
FASTENER
423-37410
337410
3-9/16"
1-3/8"
4-15/16"
4.05 in2
#8 FH
9-1/8"
B 3.24 in2
4-5/8"
HOSE/HOLE SIZE
FASTENER
# 6 RH 331400-1
423-31400
2-15/16" 1-3/4"
4-5/8"
4"
#10 FH
MIDGET VENT
Stamped 304 Stainless
ORDER NO. MFR. NO. A 423-31360 331360-1 1-5/8" 423-31370 331370-1 2-1/4"
B C VENT AREA FASTENER
1-3/4" 2-1/8"
1/2" 5/8"
# 6 RH # 6 RH
1/2"
.75 in2
# 6 RH
VENT AREA
FASTENER
4" 5"
3-1/4" 4-1/8"
3-5/8" 4-1/2"
# 6 RH # 6 RH
DRAIN COVER
Stamped 304 Stainless
ORDER NO. MFR. NO. A 423-31600 331600-1 3-1/4" 423-31601 331601-1 2-1/2"
B VENT AREA FASTENER
2-3/4" 2-1/8"
# 6 RH # 6 RH
531
VENTS - COWL/TRANSOM
COWL VENTILATOR WITH FLANGE
For use with 3" I.D. wire-supported ventilation hose. Comes with flexible hose flange for simple, secure insertion into the deck hole. Flange is screwed onto hose, then the vent snaps easily onto the flange. Vent constructed of chrome-plated die-cast Perma- Plate ZAMAK. Flange is non-corrosive plastic. Dimensions: 5-5/16" wide x 6" long x 2-1/4" high (neck extends 1" below deck) Installation hole size: 3-1/4" to 3-1/2" diameter Pre-drilled with three holes for #8 screws
COWL VENTILATOR
Chrome Plated Zinc Alloy Cowl with Black Polymer Base. 3" Duct Threads into Neck, Hose Clamps Not Required. Overall Length: 5-3/4" / Overall Width: 4-3/8" Overall Height: 2-5/8" / Mouth Opening: 8 sq. ins. Screw Size: #8
ORDER NO. 621-13120
Drain/Vent short, white nylon Knock-in-Barb, fits " hole. Dimensions: 1.25" H x 1.1" W x 1.25" L
ORDER NO. 615-09033
THRU VENT
Injection Molded Polypropylene
(OVERALL)
A 2-13/16" 2-13/16"
B 5/8" 5/8"
C 3-5/8" 3-5/8"
FASTENER #8 FH #8 FH
FASTENER: #8 FH
532
SOLAR VENTS
A B 9-1/8" 4-5/8"
Fastener #6 RH
LOCKER VENTILATOR
Chrome Plated Brass Screw Size: #6 R.H. ORDER NO. 621-03301 621-03302 Size / O.D. 2-1/2" 3-1/4"
All MiniVent 1000 models come complete with white plastic interior trim ring, mounting hardware and an easy-to-understand installation manual.
he MiniVent 1000 is the smallest and most economical solar vent in the Nicro line. At just 7" in diameter and approximately 1-3/4" high, the MiniVent 1000 is compact yet effective. The solar powered model is an exhaust vent only, but it will keep the boat cabin cool when you need it most during the hot sunlight hours. Under solar power, the Mini Vent 1000 will move 700 cubic feet of air an hour. At night, even a light breeze will continue to ventilate the boat passively. Built-in shut-off damper prevents water intrusion in rough seas. Fits a 3-3/4" installation hole. Mfr. No. N20020 3" White ORDER NO. 113-20020
Solar powered exhaust ventilation during daylight -passive exhaust at night No batteries or wiring required Whisper-quiet fan operation Durable white ABS construction Shut-off damper to prevent water intrusion in rough seas 2-year limited warranty and 5-year qualified warranty Mounting hardware included Optional stainless steel cover available Dimensions: 7" diameter x 1-3/4" high
MINIVENT 1000
icro offers the AirVent 500 as a non-solar ventilation option that can passively move 600 to 1,000 cubic feet of air per hour in a 15 knot breeze. Nicros engineering expertise created this vent to be strong, compact and effective. The AirVent 500 is an economical way to provide ventilation in your boat or it can be used in conjunction with other solar powered or 12V vents to create cross flow air circulation.
Compact size: 7" diameter x 1-3/4" high High Air Flow volume 600-1,000 cu. ft./hour in a 15 knot breeze Strong U.V. stabilized white ABS construction Center panel is translucent plastic allowing light to pass through it below deck Center damper shuts vent off from below Easy installation- attaches directly to deck in compact 3-3/4" diameter hole
AIRVENT 500
533
apphire suspension bearing, 10" Vane (25cm) and adjustable tacking arms with tabs. Vane and tabs feature reflectors for high visibility day and night. Includes glass reinforced polycarbonate J-Base for side, top or front of mast mounting on most dinghies, smaller boats and sport boats. Stands just 9.25" (23.5cm) tall and weighs 1.2 ounces (31g). ORDER NO. Description 510-03120 Windex 10. Sport 510-03101 Spare Vane Only
he 15" (38.1cm) vane can be through bolted or tapped into the masthead. The mounting socket has a 5/16"-18 thread. The entire unit weighs only 3.6 ounces (101g). Sapphire suspension system and reflector tabs on the bottom surfaces make Windex 15 highly sensitive and visible, even at night! Bird-proof spike extends above vane to keep birds off your mast. Can be equipped with Windex Light #3200.
ORDER NO. 510-03150 510-03151
his unique lighting system makes it as easy to "read the wind" at night as during the day, from anywhere on deck. The Windex Light is mounted directly to the masthead fitting of the Windex 10 and 15. The non-dazzling light from the 12-volt bulb illuminates the reflecting surfaces of the reference tabs and vanes. Completely waterproof with non-corroding, silver parts. Low battery drain: Current draw of Windex Light is 120ma.
index AV lets you mount the time tested Windex 15" wind vane onto standard Metz or Shakespeare brand VHF or AM/FM whip antennas. Keeps masthead uncluttered, reduces weight and windage aloft. Rides on low-friction Teflon bearings in place of sapphire suspension. Complete with 15" (38cm) vane, reflective tabs, stainless arms, and all components needed for easy installation.
ORDER NO. Mfr. No. Description 510-03160 3160 Windex AV
WINDEX ACCESSORIES
tandard with the Windex 10.Sport, J-Base can be ordered as an option for Windex 15. Allows for side, top or front mounting on most masts, on big boats or dinghies alike. J-Base is made of glass filled polycarbonate, 2" (5cm) long. Includes stainless steel set screw ORDER NO. Mfr. No. Description and (2) #10 self-tapping screws. Reduces overall weight by 15 grams 510-03155 3155 J-Base for Windex 15 510-03125 3125 J-Base for Windex 10.Sport when substituted for standard mounting base on Windex 15.
534
lack Max is a versatile, high performance wind direction indicator that attaches quickly to masts and booms on most small boats such as Lasers and Sunfish. The tough, high impact plastic vane is designed to withstand years of punishment and the abuse of small boat sailing. The stainless steel mounting arm and set screw, as well as a tough plastic mounting base, add to the system's durability. Wind vane length 8" (20 cm).
ORDER NO. 510-01295
Unique adjusting system fits masts OR booms from 1.5 to 2.5" (38 to 64 mm)
Attached to a boom
Attached to a mast
ightweight, ripstop nylon Air-Flow TelsTM attach to sails with waterproof adhesive locator discs. No holes required. Tels show the air flow across the sails - allowing you to trim sails for maximum performance. Each kit includes 14 Tels and full instructions on where to apply them and how to read them. #950 Air-Flow TelsTM
ORDER NO.510-00950
xtend your Windex 10.Sport or Windex 15 vane away from masthead obstructions. The 13" (33cm) arm comes with hardware to allow for side or top mounting and offset angles up to 20 degrees. Mount on the back of the mast for easier viewing from the cockpit. Can be used with Windex Light # 510-03200. Length 13 inches (33cm) Weight 3.2 oz (90g)
ORDER NO.510-01705
535
RADAR REFLECTORS
SAIL TRACK STOPS
When it's time to lower your sail you can rely on Davis' Round and Flat SAIL TRACK STOPS to hold your sail and its slides in place on the mast and boom. Large knurled wheels are released with ease. Made of heavy-duty, black anodized aluminum and marine grade nickel plated brass. Flat stops come with lanyard holes. #2350 ROUND .50" dia. x 875" (13 x 22mm) ORDER NO. 510-02350 #2351 FLAT .42" x 1 x .125" (11 x 25 x 3mm) ORDER NO. 510-02351 #2352 FLAT .75" x 1 x .125" (19 x 25 x 3mm) ORDER NO. 510-02352
he Windscoop Ventilating Sail puts an end to hot, stuffy cabins and sleepless nights. The Windscoop is aerodynamically designed to force the slightest breeze down into your cabin to keep you cool and comfortable. All seams are double-stitched. Two battens are sewn in place. The versatile Windscoop can be hung from a halyard boom or roller furling sheet. Fits any hatch or companion-way up to 4 feet (1.2m) wide. Nothing to install. Since the Windscoop has no tie-downs, once you put it up, it will follow a variable wind. Works with most screens. Windscoop is packed in its own protective nylon storage bag. Colours vary. Mfr. No. 291
ORDER NO. 510-00291
Added material & strengthening in stress areas. Two battens are sewn in place. All seams are double-stitched.
POWERBOATERS! Its easy and inexpensive to adapt WINDSCOOPS for powerboat use. Write for details.
RADAR REFLECTORS
Giving ships a chance to see you in fog and low visibility conditions is a must for serious boaters. Proven Superiority. Ranked "the best radar reflector" and one of the top ten sailing products by Practical Sailor. Rated "superior" by SRI after the most rigorous tests ever conducted on radar reflectors, some costing 10 times as much.
chomaster's full 12.5" (32cm) diameter circular reflector plates provide 13.2 square yards (12 sq. meters) of maximum effective radar cross section in the X or 3 cm band (9-9.6 GHz frequency), based on optimum orientation between the reflector and radar. Offers equivalent radar cross section of conventional triangular plate reflector with approximate 17" (43cm) diagonal dimension. Robust 0.05" (1.3mm) marine grade aluminum circular plates; sufficient thickness to minimize flexing; dimpled to minimize angular distortion. Tough injection-molded, captive corner latches assure minimum angle error. Has 1-1/4" (32mm) windage holes for reduced aerodynamic drag. These holes also allow assembly of the reflector around a backstay. Quickly and easily assembled and demounted. Stows flat. Full booklet on radar reflectors and detailed instructions provided. PATENTED.
536