Sei sulla pagina 1di 1

13.06.

13

Strainers, Filters, Basket Strainers, Y Type Strainer, T Type Strainers, Conical Strainers, Candle Filters, Cartridge Filters, Mumbai, India

Home | Profile | Products | Quality Management Systems | Reference | Mesh - Micron Relation | Application | Certification | Contact | Enquiry

Basket Strainers ( Simplex / Duplex type ) 'Y' Type Strainer 'T' Type Strainers Conical Strainers Candle Filters / Cartridge Filters Pleated Filters

An official definition adopted by the Fluid Controls Institute is : "A closed vessel with cleanable screen element designed to remove and retain foreign particles. Note the term "foreign particles". Strainers do not necessarily remove only dirt. They take out material which is not wanted in the fluid and this can sometime be a valuable product which may be saved.

WHY STRAINERS & FILTERS ?


The problem of unwanted material in pipelines is a never ending one. Whether the flowing material as seawater, oil, paint or a variety of food or chemical products, there is often something present that can cause trouble. Dirt, foreign matter, or even clumps of the product itself can clog or damage pumps, spray nozzles, condensers, and similar equipment. Sometime a finished product has to be rejected because of the presence of undesirable solid matter.

OPEN AREA RATIO


It is the ratio of the open area through the strainer basket to the cross sectional area of the pipeline. A well designed \ basket strainer should have an open ratio of at least 4 to 1. Anything less may cause excessive pressure drop. The ratio is calculated with a clean basket and as the basket begins to clog the ratio will drop. Unless there is a wide safety margin the area through the basket may quickly become smaller than the pipe area. This will reduce flow through the strainer and necessitate very frequent cleaning. A small open area ratio also means the holding capacity of the basket is small - an important consideration if the amount of solid matter to be removed is large.

Resin Trap

1, Mhatre Comp., Behind Lalit Weigh Bridge, Sonarpada, Dombivli (E), Thane - 421204. Tel.No : (0251) 2871170 / 9930003873 Fax No : (0251) 2871170 E-Mail :

CRITERIA FOR SELECTION OF PROPER STRAINER


The material of construction The design and working pressures The design and working temperatures The service (liquid or vapor) The flow rate and viscosity (if a liquid) The particle size to be retained The debris loading The seal material (o-ring or gasket) Whether the line flow can be interrupted or not for basket,screen cleaning The clean start up pressure The location of the strainer

MSME certificate

Home | Profile | Products | Quality Management Systems | Reference | Mesh - Micron Relation | Application | Certification | Contact | Enquiry
Designed & Hosted by : MID Promoted by : GID

www.virastrainers.com

1/1

Potrebbero piacerti anche