Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
WKM
WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
TABLE OF CONTENTS
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
WKM
TABLE OF CONTENTS
WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
Ville Platte, LA
Camerons Valves & Measurement (V&M) group is a leading provider of valves and
measurement systems to the oil and gas industry. The groups products are primarily used to
control, direct and measure the flow of oil and gas as it is moved from individual wellheads
through flow lines, gathering lines and transmission systems to refineries, petrochemical
plants and industrial centers for processing.
The Engineered & Process Valves division provides a wide range of valves for use in natural
gas, LNG, crude oil and refined products transmission lines. The traditional CAMERON
fully-welded ball valve product line has been combined with the GROVE, RING-O, TOM
WHEATLEY, ENTECH and TK product lines. This broad offering has significantly
strengthened Camerons ability to serve as a single source for a wide scope of customer
requirements. The division also provides critical service valves for refinery, chemical and
petrochemical processing businesses and for associated storage terminal applications,
particularly through the ORBIT and GENERAL VALVE. These brands are complimented by
WKM, TBV and Texsteam valve products and considerably expand the scope of this
divisions product offerings.
The WKM Saf-T-Seal gate valves smooth continuous bore minimizes turbulence. In full
bore valves pressure drop is no more than through an equal length of the same size pipe.
Seat faces are outside the flow stream and thus protected from contact with the lading
whether the valve is open or closed. The WKM Sat-T-Seal gate valves full round bore
makes it possible to run pigs, scrapers or hot tap cutters through the valves without
danger of damaging the valve, lodging the scraper, or jamming it with metal cutting.
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
WKM
Smooth, Continuous
Conduit for Flow
estructive turbulence is
D
eliminated. In a full bore valve,
pressure drop through the valve is
no greater than that through an
equal length of equal diameter
pipe.
Block-and-Bleed Capability
WKM Saf-T-Seal Valve Model C6B 6 in. - 12 in. (150 mm - 300 mm) Class 600 - 900
WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
WKM
Extensions
For valves which are to be buried,
operated from a catwalk, or
otherwise difficult to reach, stem and
body fitting extensions can be
supplied in virtually any desired length
in 6 in. increments from the minimum
extension length that can be
furnished. Extensions come as original
equipment or can be field-installed on
valves already in service.
WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
Peripheral
groove and
sealant
injection
port
Plastic
insert
WKM
Peripheral
groove and
sealant
injection
port
Plastic
insert
10 WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
WKM 11
MAX. WP @ 100F
Class 600:
Class 900:
Class 1500:
PRINCIPAL DIMENSIONS
Model M - CLASS 600
Size in.
(mm)
FE
WE
11 1/2
2 1/16
4 13/16
17 3/4
12
15 3/4
90
72
FxW
84
(50)
(292)
(52)
(122)
(451)
(305)
15 3/4
(41)
(33)
(38)
14
3 3/16
6 15/16
24 3/8
12
20 1/4
180
144
155
(80)
(356)
(81)
(176)
(619)
(305)
20 1/4
(82)
1(65)
(70)
17
4 1/8
8 5/8
29
14
19 1/2
345
259
245
(100)
(432)
(105)
(219)
(737)
(356)
19 1/2
(156)
(117)
(111)
2 1/16
5 1/16
17 3/4
12
15 3/4
150
72
105
(48)
14 1/2
(50)
(368)
(52)
(129)
(451)
(305)
15 3/4
(68)
(33)
15
3 3/16
7 5/16
24 3/8
12
20 1/4
265
193
247
(80)
(381)
(81)
(186)
(619)
(305)
20 1/4
(120)
(88)
(112)
18
4 1/8
9 1/16
29
18
19 1/2
515
390
417
(100)
(457)
(105)
(230)
(737)
(457)
19 1/2
(234)
(177)
(189)
14 1/2
2 1/16
5 1/16
17 3/4
12
15 3/4
220
150
154
(50)
(368)
(52)
(129)
(451)
(305)
15 3/4
(100)
(68)
(70)
18 1/2
3 3/16
7 5/16
24 3/8
12
20 1/4
450
328
370
(80)
(470)
3(81)
(186)
(619)
(305)
20 1/4
(204)
(149)
(168)
21 1/2
4 1/8
9 1/16
29
18
19 1/2
720
547
583
(100)
(546)
(105)
(230)
(737)
(457)
19 1/2
(327)
(248)
(264)
12 WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
Class 300:
Class 600:
Class 900:
G
K
PRINCIPAL DIMENSIONS
N
SN = Stem nut
BGO = Bevel Gear Operator
Bevel Gear-Operated
Handwheel-Operated
G
(HWO)
G
(BGO)
*
H
N
SN
N
BGO
FE
6
(150)
8
(200)
10
(250)
12
(300)
10 1/2
(267)
11 1/2
(292)
13
(330)
14
(356)
6
(152)
8
(203)
10
(254)
12
(305)
13 1/2
(343)
16 1/2
(419)
19 1/2
(495)
22 3/4
(578)
45 3/8
(1153)
52 3/8
(1330)
59 1/2
(1511)
68 5/8
(1743)
46 3/8
(1178)
55 3/8
(1407)
60 1/2
(1537)
69 5/8
(1768)
24
(610)
24
(610)
24
(610)
24
(610)
30 3/4
(781)
35 7/8
(911)
40 7/8
(1038)
46 1/8
(1172)
29
29
37
37
45
45
53
53
116
116
148
148
180
180
212
212
245
(111)
365
(166)
515
(234)
677
(307)
215
(98)
320
(145)
459
(208)
594
(269)
230
(104)
342
(155)
488
(221)
635
(288)
13 1/2
(343)
16 1/2
(419)
19 1/2
(495)
22 5/8
(578)
45 3/8
(1153)
54 3/8
(1381)
59 1/2
(1511)
68 5/8
(1743)
46 3/8
(1178)
55 3/8
(1407)
60 1/2
(1537)
69 5/8
(1768)
24
(610)
24
(610)
24
(610)
24
(610)
30 3/4
(781)
35 7/8
(911)
40 7/8
(1038)
46 1/8
(1172)
29
29
37
37
45
45
53
53
116
116
148
148
180
180
212
212
316
(143)
520
(236)
773
(351)
1035
(469)
271
(123)
459
(208)
695
(315)
930
(422)
294
(133)
489
(222)
731
(332)
983
(446)
13 5/8
(346)
16 3/4
(425)
20
(508)
23 1/4
(591)
45 3/8
(1153)
56 3/8
(1432)
59 1/2
(1511)
68 7/8
(1743)
46 3/8
(1178)
57 3/8
(1457)
61 1/2
(1562)
70 1/2
(1791)
24
(610)
24
(610)
24
(610)
30
(762)
30 3/4
(781)
37 13/16
(960)
40 7/8
(1038)
47 1/4
(1200)
29
29
37
37
45
45
53
53
116
116
148
148
180
180
318
318
600
(272)
970
(440)
1736
(787)
2374
(1077)
439
(199)
737
(334)
1584
(718)
2010
(912)
650
(295)
853
(387)
1656
(751)
2156
(9143)
13 7/8
(352)
17 1/8
(435)
20 1/2
(521)
23 3/4
(603)
45 1/8
(1146)
56 1/8
(1426)
59 1/2
(1511)
71 3/4
(1822)
461/8
(1222)
57 1/8
(14510
60 3/4
(1543)
73 1/8
(1857)
24
(610)
24
(610)
30
(762)
30
(762)
30 3/4
(781)
37 13/16
(960)
42 1/16
(1068)
48 1/2
(1232)
29
29
37
37
45
45
53
53
116
116
148
148
180
180
318
318
650
(295)
1200
(544)
2150
(975)
3250
(1474)
500
(227)
950
(431)
1830
(830)
2500
(1134)
575
(261)
1050
(476)
1980
(898
2650
(1202)
15 7/8
(403)
16 1/2
(419)
18
(457)
19 3/4
(502)
6
(152)
8
(203)
10
(254)
12
(305)
22
(559)
26
(660)
31
(787)
33
(838)
6
(152)
8
(203)
10
(254)
12
(305)
24
(610)
29
(737)
33
(838)
38
(965)
6
152)
8
(203)
10
(254)
12
(305)
WKM 13
MAX. WP @ 100F
Class 150:
Class 300:
PRINCIPAL DIMENSIONS
N
G
K
SN = Stem nut
150 Class
300 Class
SIZE
(in.)
N
SN
N
BGO
FE
14
(350)
16
(400)
18
(450)
20
(500)
24
(600)
26
(650)
28
(700)
30
(750)
36
(900)
15
(381)
16
(406)
17
(432)
18
(457)
20
(508)
22
(559)
24
(610)
26
(660)
32
(813)
13 1/4
(337)
15 1/4
(387)
17 1/4
(438)
19 1/4
(489)
23 1/4
(591)
25
(635)
27
(686)
29
(737)
34 1/2
(876)
25 1/4
(641)
28 3/8
(721)
31 3/8
(797)
34 1/2
(876)
41 1/8
(1045)
43 13/16
(1113)
46 7/8
(1191)
50
(1270)
59
(1499)
76
(1930)
82 7/8
(2105)
90
(2286)
98 1/4
(2496)
113
(2870)
120 1/4
(3054)
127 1/4
(3232)
136 1/4
(3461)
157
(3988)
24
(610)
24
(610)
24
(610)
24
(610)
24
(610)
24
(610)
24
(610)
24
(610)
36
(914)
51 3/4
(1314)
56 7/8
(1445)
62
(1575)
67 1/4
(1708)
78
(1981)
84 5/8
(2149)
90 1/8
(2289)
95 1/2
(2426)
113 3/8
(2880)
36 3/4
36 3/4
41 3/4
41 3/4
46 1/16
46 1/16
41 1/2
41 1/2
50 1/4
50 1/4
57 7/8
57 7/8
62 1/2
62 1/2
46 1/8
46 1/8
146 7/8
146 7/8
166 7/8
166 7/8
184 3/8
184 3/8
166
166
301 1/2
301 1/2
347 1/4
347 1/4
500
500
368 3/4
368 3/4
872
(396)
1309
(594)
1781
(808)
2351
(1066)
2892
(1312)
3521
(1597)
4098
(1859)
4916
(2230)
5842
(2650)
817
(371)
1235
(560)
1690
(767)
2235
(1014)
2703
(1226)
3327
(1509)
3802
(1725)
4573
(2074)
5521
(2504)
Flange dimensions on valves through 24 in. (600 mm) conform to American National Standards Institute Standard 816.5, 1974.
Larger sizes conform to MSS-SP-44.
30
(762)
33
(838)
36
(914)
39
(991)
45
(1143)
49
(1245)
53
(1346)
55
(1397)
68
(1727)
13 1/4
(337)
15 1/4
(387)
17 1/4
(438)
19 1/4
(489)
23 1/4
(591)
25
(635)
27
(686)
29
(737)
34 1/2
(876)
25 1/2
(648)
28 1/8
(714)
31
(787)
34 1/2
(876)
41 1/8
(1045)
43 3/4
(1111)
47
(1194)
50 5/8
(1286)
59 1/4
(1505)
75 5/8
(1921)
80 5/8
(2048)
88
(2235)
97 3/4
(2483)
114 1/8
(2899)
120 1/4
(3054)
129 3/4
(3296)
139 1/8
(3534)
161
(4089)
24
(610)
24
(610)
24
(610)
24
(610)
24
(610)
24
(610)
24
(610)
36
(914)
36
(914)
49 1/2
(1257)
54 1/2
(1384)
60 3/4
(1543)
67
(1702)
78 3/4
(2000)
83 1/4
(2115)
90 1/4
(2292)
96 3/4
(2457)
112 3/4
(2864)
14 WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
29 3/8
29 3/8
41 3/4
41 3/4
37 3/8
37 3/8
41 1/2
41 1/2
50 1/4
50 1/4
39 1/16
39 1/16
46 1/8
46 1/8
117 1/2
117 1/2
166 7/8
166 7/8
224 1/4
224 1/4
249
249
402
402
312 1/2
312 1/2
368 3/4
368 3/4
1454
(660)
2182
(990)
2969
(1347)
3919
(1778)
5868
(2662)
6830
(3098)
8194
(3717)
9736
(4416)
15441
(7004)
1266
(574)
1939
(880)
2672
(1212)
3532
(1602)
5287
(2398)
5844
(2651)
7051
(3198)
8773
(3979)
13607
(6172)
1361
(617)
2058
(933)
2816
(1277)
3725
(1690)
5545
(2515)
6337
(2874)
7623
(3458)
9201
(4174)
14524
(6588)
Class 900:
PRINCIPAL DIMENSIONS
N
SN = Stem nut
BGO = Bevel Gear Operator
SIZE
(in.)
N
SN
N
BGO
FE
14
(350)
16
(400)
18
(450)
20
(500)
24
(600)
26
(650)
28
(700)
30
(750)
36
(900)
35
(889)
39
(991)
43
(1092)
47
(1194)
55
(1397)
57
(1448)
61
(1549)
65
(1651)
82
(2083)
13 1/4
(337)
15 1/4
(387)
17 1/4
(438)
19 1/4
(489)
23 1/4
(591)
25
(635)
27
(686)
29
(737)
34 1/2
(876)
26
(660)
29 1/8
(740)
32 3/8
(822)
35 7/8
(911)
42 1/4
(1073)
46
(1168)
49 1/4
(1251)
52 3/4
(1340)
61 3/4
(1568)
75 3/8
(1915)
83 1/2
(2121)
91 1/2
(2324)
100 1/2
(2553)
118
(2997)
124 5/8
(3165)
134
(3404)
142 3/4
(3626)
171 1/4
(4350)
24
(610)
24
(610)
24
(610)
24
(610)
36
(914)
36
(914)
36
(914)
36
(914)
36
(914)
51 1/2
(1308)
56 3/4
(1441)
62 1/2
(1588)
69 3/8
(1762)
83
(2108)
87 1/2
(2223)
93 1/2
(2375)
100 1/2
(2553)
117 1/2
(2985)
29 3/8
29 3/8
33 3/8
33 3/8
37 3/8
37 3/8
26
26
31 3/8
31 3/8
33 9/16
33 9/16
36 3/16
36 3/16
39 1/16
39 1/16
46 1/8
46 1/8
176 1/4
176 1/4
200 1/4
200 1/4
224 1/4
224 1/4
208
208
251 1/4
251 1/4
268 3/4
268 3/4
434
434
468 3/4
468 3/4
553 1/8
553 1/8
3232
(1466)
4023
(1825)
5617
(2548)
6984
(3168)
11447
(5192)
13124
(5953)
14293
(6483)
14457
(6558)
26377
(11964)
2828
(1283)
3515
(1594)
4110
(1864)
6070
(2753)
10014
(4542)
11494
(5214)
12232
(5548)
12724
(5772)
23967
(10871)
3030
(1374)
3767
(1709)
5252
(2382)
6449
(2925)
10730
(4867)
10024
(4547)
12624
(5726)
13591
(6165)
25172
(11418)
25 9/16
(649)
30 7/16
(773)
33 7/8
(860)
37 1/4
(946)
46 1/4
(1175)
79 5/8
(2022)
87 3/8
(2219)
56 15/16
(1446)
103 3/8
(2626)
123 1/8
(3127)
24
(610)
24
(610)
24
(610)
36
(914)
36
(914)
55 13/16
(1418)
60 3/16
(1529)
64 11/16
(1643)
71 1/8
(1807)
86 3/8
(2194)
20 7/8
20 7/8
20 7/8
20 7/8
23 3/8
23 3/8
26
26
-
166 7/8
166 7/8
166 7/8
166 7/8
187
187
208
208
-
40 1/2
(1029)
44 1/2
(1130)
48
(1219)
52
(1321)
61
(1549)
12 3/4
(324)
15 1/4
(387)
17 1/4
(438)
19 1/4
(489)
23 1/4
(591)
WKM 15
Valve type: Saf-T-Seal
Size: pipe size x bore size
Pressure Class
Top mounted or side mounted
Closing time: Number of seconds
Maximum differential pressure: psi
Type and make of actuator required
Voltage:
3-phase 60-cycle 220V/440V?
3-phase 50-cvcle 220V/440V?
Control voltage
Motor connection voltage
Any special requirements
Enclosure:
Weatherproof?
Explosion proof class 1, Group D, Div. 2?
Any special requirements
ATEX?
Certification required?
Accessories:
Reversing starter?
Any special requirements
Control transformer?
Any special requirements
Push button station:
3 pushbuttons?
2 lights?
Any special requirements
Limit switches:
2-train geared limit switch (8 contacts)?
4-train geared limit switch (16 contacts)?
Special requirements
16 WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
Description
The new Cameron Saf-T-Gard diaphragm actuator product line has been developed
by using the superior features of field proven products and then combining them
with innovative technology. Particular attention has been given to safety, ease of
maintenance and cost of manufacturing.
The Cameron pneumatic diaphragm actuator series is designed to be used with all
manufacturers gate valves in nominal sizes of 2 in. to 6 in. (50 mm to 150 mm). Its
simple design and operating principle make this diaphragm actuator inherently
trouble free, avoiding most of the problems such as galling, misalignment, distortion
and O-ring failures commonly associated with piston type actuators.
Design Advantages
Stronger Actuator
Mounting Arrangement
Unlike other designs, the mounting bolts
on Cameron actuators are positioned
parallel to the center line of the
actuator, which loads the mounting
bolts in tension. This design is not
subject to bending and shear forces;
hence, withstanding greater separation
forces than other actuators on the
market.
The Saf-T-Gard diaphragm actuators are interchangeable with other models in the
product line, which minimizes the amount of spare parts necessary for maintenance.
Top shaft
Seal retainer
Rod wiper
Snap ring
Polypak seal
Wear bearing
Diaphragm nut
Diaphragm retainer plate
Pressure
relief
device
Pressure inlet
Diaphragm
Downstop
Spring
Spacer
Breather plug
Packing retainer
Lower ring
Stem packing
Stem
Metal-to-metal backseat
Bonnet
WKM 17
Top shaft
Seal retainer
Rod wiper
Snap ring
Polypak seal
Wear bearing
Diaphragm nut
Diaphragm retainer plate
Pressure inlet
Diaphragm
Downstop
Spring
Spacer
Breather plug
Packing retainer
Lower ring
Stem packing
Stem
Metal-to-metal backseat
Bonnet
MA 20 SERIES
For use with 2 in., 3 in., 4 in., 5 in. and
6 in. (50 mm, 80 mm, 100 mm, 125
mm and 150 mm) nominal gate
valves (Family Group Code Y55020).
Top shaft
Seal retainer
Rod wiper
Snap ring
Polypak seal
Wear bearing
Diaphragm nut
Diaphragm retainer plate
Pressure
relief
device
Pressure inlet
Diaphragm
Downstop
Spring
Spacer
Breather plug
Packing retainer
Lower ring
Stem packing
Stem
Bonnet
18 WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
Pressure
relief
device
Top shaft
Seal retainer
Rod wiper
Snap ring
Polypak seal
Wear bearing
Diaphragm nut
Pressure inlet
Stem extension
Diaphragm retainer plate
Pressure inlet
Diaphragm
Downstop
Spring
Spacer
Breather plug
Packing retainer
Lower ring
Stem packing
Stem
Metal-to-metal backseat
Bonnet
MA 2012 SERIES
For use with 2 in., 3 in. and 4 in. (50
mm, 80 mm and 100 mm) nominal
gate valves (Family Group Code
Y55020).
The MA 2012 series increases the area
affected by applied control pressure.
Pressure
relief
device
Top shaft
Seal retainer
Rod wiper
Snap ring
Polypak seal
Wear bearing
Diaphragm nut
Pressure inlet
Stem extension
Diaphragm retainer plate
Pressure inlet
Diaphragm
Downstop
Spring
Breather plug
Packing retainer
Lower ring
Stem
Bonnet
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
WKM 19
Pressure
relief device
Top shaft
Seal retainer
Rod wiper
Snap ring
Polypak seal
Wear bearing
Diaphragm nut
Pressure inlet
Stem extensions
Diaphragm retainer plate
Pressure inlet
Diaphragm
Downstop
Spring
Breather plug
Packing retainer
Lower ring
Stem
Bonnet
MA 2020 SERIES
For use with 2 in., 3 in., 4 in., 5 in.,
6 in. and 8 in. (50 mm, 80 mm, 100
mm, 125 mm, 150 mm and 200 mm)
nominal gate valves (Family Group
Code Y55020).
The MA 2020 series increases the
area affected by applied control
pressure.
Pressure
relief device
Top shaft
Seal retainer
Rod wiper
Snap ring
Polypak seal
Wear bearing
Diaphragm nut
Pressure inlet
Stem extensions
Diaphragm retainer plate
Pressure inlet
Diaphragm
Downstop
Spring
Breather plug
Packing retainer
Lower ring
Stem
Bonnet
20 WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
Description
The Cameron pneumatic piston actuator product line has been developed by using
the superior features of field proven products and then combining them with
innovative technology. Particular attention has been given to safety, ease of
maintenance and cost of manufacturing. The Cameron pneumatic piston actuator
series is designed to be used will all manufacturers gate valves in nominal sizes of
2 in. to 4 in. (50 mm to 100 mm). Its remarkably simple design and operating
principle make this piston actuator suitable for all types of applications. The
Cameron piston actuators are interchangeable and very versatile because they
operate with many types of supply gas, compressed air, nitrogen or well gas.
Design Advantages
Stronger Actuator
Mounting Arrangement
Unlike other designs, the mounting bolts
on Cameron actuators are positioned
parallel to the center line of the
actuator, which loads the mounting
bolts in tension. This design is not
subject to bending and shear forces;
hence, withstanding greater separation
forces than other actuators on the
market.
Pressure relief
device
Pressure inlet
Top cap
Diaphragm nut
Piston seal
Piston
Upper spring retainer
Top shaft
Seal retainer
Rod wiper
Snap ring
Polypak seal
Downstop
Housing
Spring
Breather plug
Snap ring
Lock ring
Lower housing
Packing retainer
Lower ring
Stem
Bonnet
WKM 21
Maximum
Total
Stem Nut
Allowable
Stem
Turns to
Torque
Travel
Open
(ft-lbf)
in. (mm)
Valve
2 (50)
150
290
457
535
12597
93
2.63 (67)
15.8
2 (50)
300
750
1183
1383
10
12597
93
2.63 (67)
15.8
2 (50)
600
1500
2366
17
2766
20
12597
93
2.63 (67)
15.8
2 (50)
900
2250
3549
26
4149
30
12597
93
2.63 (67)
15.8
2 (50)
1500
3750
5914
43
6915
51
12597
93
2.63 (67)
15.8
3 (80)
150
290
803
1115
16027
136
4.03 (102)
20.2
3 (80)
300
750
2078
18
2884
25
16027
136
4.03 (102)
20.2
3 (80)
600
1500
4155
35
5769
49
16027
136
4.03 (102)
20.2
3 (80)
900
2250
6233
53
8653
74
16027
136
4.03 (102)
20.2
3 (80)
1500
3750
10388
88
14422
123
16027
136
4.03 (102)
20.2
4 (100)
150
290
1327
14
1783
19
25442
271
4.88 (124)
19.5
4 (100)
300
750
3432
37
4610
49
25442
271
4.88 (124)
19.5
4 (100)
600
1500
6864
73
9221
98
25442
271
4.88 (124)
19.5
4 (100)
900
2250
10297
110
13831
147
25442
271
4.88 (124)
19.5
4 (100) 1500
3750
17161
183
23052
245
25442
271
4.88 (124)
19.5
Maximum
Allowable
Torque
Total
Stem
Travel
Stem Nut
Turns to
Open
Model C6B, 6 in. - 12 in. (150 mm - 300 mm) ASME CLASS 600-900
Valve
ASME
Recommended Recommended Block- Block- Maximum
Stem Thread
Size ASME Working
Operating
&-Bleed &-Bleed Allowable
Operating
Pressure Size Pitch Lead
Torque
Thrust Torque
Thrust
Thrust
in.
(mm)
Class
(psig)
in.
in.
in.
(lbf)
(ft-lbf)
(lbf)
(ft-lbf)
(lbf)
(ft-lbf)
in. (mm)
Valve
6 (150)
600
1500
9839
105
14307
152
26783
283
7.25 (184)
29
6 (150)
900
2250
14758
157
21460
228
27685
335
7.25 (184)
29
8 (200)
600
1500
17099
237
21507
298
45807
557
9.25 (235)
37
8 (200)
900
2250
25649
355
32261
447
49637
604
9.25 (235)
37
10 (250)
600
1500
23859
330
29078
403
46726
569
11.25 (286)
45
10 (250)
900
2250
35789
495
43617
604
57297
697
11.25 (286)
45
12 (300)
600
1500
32032
443
41381
573
69033
840
13.31 (338)
53
12 (300)
900
2250
49816
770
62072
959
80522
1109
13.31 (338)
53
14 (350)
150
290
7149
104
16674
242
9053
131
14.75 (375)
36.875
14 (350)
600
1500
39183
741
64831
1226
46824
886
14.75 (375)
29.50
16 (400)
150
290
9177
133
27543
399
11448
166
16.75 (425)
41.875
16 (400)
600
1500
49676
940
69091
1307
59215
1120
16.75 (425)
33.50
18 (450)
150
290
11594
168
22596
327
13960
202
18.50 (470)
46.25
18 (450)
600
1500
63501
1303
98175
2014
72208
1481
18.75 (470)
37.50
20 (500)
150
290
14380
249
31621
548
17230
298
20.75 (527)
41.50
20 (500)
600
1500
79986
1858
145272
3375
89122
2070
20.75 (527)
41.50
24 (600)
150
290
20606
390
21390
405
26347
498
25.125 (638)
50.25
24 (600)
600
1500
114674
3510
219495
6718
136279
4171
25.00 (635)
31.25
NOTE: 1. Recommended operating thrust and torque are the loads required to open or close the valve with full differential pressure
across the gate. The operator should be sized for these values.
2. Maximum allowable thrust and torque values are maximum allowable loads of the valve.
3. When block-and-bleed or double block-and-bleed service is specified, operators should be sized for these values.
4. Unless otherwise stated, handwheel rim pull for manual and motor operators shall not exceed 120 lbs.
5. All torque and thrust values are based on maximum working pressure at ambient temperature.
22 WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
Total
Stem Nut
Stem
Turns to
Travel
Open
in. (mm)
Valve
6 (150)
150
290
1902
18
31785
307
2762
27
7.25 (184)
29
6 (150)
300
750
4919
47
31785
307
7143
69
7.25 (184)
29
6 (150)
600
1500
9836
95
31785
307
14285
138
7.25 (184)
29
6 (150)
900
2250
14757
142
31785
307
21428
207
7.25 (184)
29
8 (200)
150
290
3106
34
52036
574
4153
46
9.25 (235)
37
8 (200)
300
750
8033
89
52036
574
10740
119
9.25 (235)
37
8 (200)
600
1500
16067
177
52036
574
21481
237
9.25 (235)
37
8 (200)
900
2250
24100
266
52036
574
32221
356
9.25 (235)
37
10 (250)
150
290
4413
49
52036
574
5817
64
11.25 (286)
45
10 (250)
300
750
11413
126
52036
574
15045
168
11.25 (286)
45
10 (250)
600
1500
22828
252
52036
574
30090
332
11.25 (286)
45
10 (250)
900
2250
34239
378
52036
574
45135
498
11.25 (286)
45
12 (300)
150
290
5993
66
52036
574
7755
86
13.25 (337)
53
12 (300)
300
750
15500
171
52036
574
20056
221
13.25 (337)
53
12 (300)
600
1500
30999
342
52036
574
40113
443
13.25 (337)
53
12 (300)
900
2250
48045
597
77223
960
60169
748
13.25 (337)
53
14 (350)
150
290
7149
95
54521
722
9063
120
14.69 (373)
36.73
14 (350)
300
750
19594
338
101611
1754
23439
405
14.69 (373)
29.38
14 (350)
600
1500
39187
676
101611
1754
46878
809
14.69 (373)
29.38
14 (350)
900
2250
60540
1129
135875
2533
70547
1315
14.69 (373)
29.38
16 (400)
150
290
9178
122
54521
722
11439
152
16.69 (424)
41.73
16 (400)
300
750
23735
314
54521
722
29584
392
16.69 (424)
41.73
16 (400)
600
1500
49680
857
101611
1754
59168
1021
16.69 (424)
33.38
16 (400)
900
2250
81146
2040
180794
4546
88752
2232
16.69 (424)
20.86
18 (450)
150
290
11594
154
54521
722
13974
185
18.44 (468)
46.10
18 (450)
300
750
30500
484
72304
1148
36139
574
18.69 (475)
37.38
18 (450)
600
1500
63504
1184
135875
2533
72278
1347
18.69 (475)
37.38
18 (450)
900
2250
99884
2512
180794
4546
108418
2726
18.69 (475)
23.36
20 (500)
150
290
14381
228
72304
1148
17245
274
20.75 (527)
41.50
20 (500)
300
750
37782
652
101611
1754
44600
770
20.75 (527)
41.50
20 (500)
600
1500
79982
2011
180794
4546
89200
2243
20.75 (527)
25.94
20 (500)
900
2250
122624
3252
225696
5986
133801
3549
20.75 (527)
25.94
22 (550)
150
290
17243
274
72304
1148
21470
341
22.94 (583)
45.88
22 (550)
300
750
45845
855
135875
2533
55526
1035
22.94 (583)
45.88
22 (550)
600
1500
96549
2561
225696
5986
111051
2945
22.94 (583)
28.68
24 (600)
150
290
20605
356
101611
1754
26366
455
25.13 (638)
50.26
24 (600)
300
750
53952
1006
135875
2533
68188
1271
25.13 (638)
50.26
24 (600)
600
1500
114677
3200
275560
7689
138375
3806
25.13 (638)
31.41
24 (600)
900
2250
178422
5474
390393
11977
204563
6276
25.13 (638)
31.41
30 (750)
150
290
31396
585
135875
2533
42018
783
31.25 (794)
62.50
30 (750)
300
750
83626
2218
225698
5986
108866
2882
31.25 (794)
39.06
30 (750)
600
1500
173437
5321
390393
11877
217333
6668
31.25 (794)
39.06
36 (900)
150
290
44184
1111
180794
4546
57303
1441
36.88 (937)
46.10
36 (900)
300
750
116110
3240
275560
7889
148199
4135
36.88 (937)
46.10
36 (900)
600
1500
241350
8075
525088
17568
296397
9317
36.88 (937)
46.10
NOTE: 1. Use RECOMMENDED OPERATING THRUST AND TORQUES for sizing bevel gear operators.
2. Use BLOCK-&-BLEED THRUSTS AND TORQUES for sizing power operators (electric, gas, hydraulic, etc.).
3. MAXIMUM OPERATING THRUST AND TORQUES are the maximum allowable for the valve.
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
WKM 23
2 - 0.875-6NA-2G LH
3 - 1.000-5NA-2G LH
4 - 1.25-4NA-2G LH
G
.005
1/4-18 NPT
F
4.25
G
4 Holes
Model M
Size
ASME
Open
Closed
in.
Class
600/1500
9.25
6.56
6.44
2.808
0.63
0.120
5.00
4.00
150/1500
12.00
7.97
7.75
2.808
0.63
0.120
5.00
4.00
150/600
15.00
10.12
9.95
3.308
0.625
0.120
5.25
4.25
900/1500
13.63
8.75
9.95
3.308
1.00
0.120
6.00
5.00
24 WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
Total
Stem Travel
n
p
Model C6
Size
ISO
A -NA-2G-L.H.
FLG
150/3C F14
8.50
15.75
7.25
150/3C F14
10.19
19.44
9.25
10
150/3C F14
12
150/3C F14
in.
Series
Closed Open
E
6.88
5.50
4 - 0.658
3.942
3.952
2.62
1.00
0.169
0.183
6.88
5.50
4 - 0.688
3.942
3.952
2.62
1.00
0.169
0.183
8.19
6.88
5.50
4 - 0.688
3.942
3.952
2.62
1.00
0.169
0.183
9.69
6.88
5.50
4 - 0.688
3.942
3.952
2.62
1.00
0.169
0.183
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
WKM 25
Total
Stem Travel
G
n
p
k=
Model C6B
Size
in.
Class
ISO
ACME STEM
FLG
Closed Open
B
7.83
10.02
7.19
16.69
16.25
28.06
10.17
19.37
9.20
20.44
20.00
35.41
10
600
8.17
20.00
38.47
10
900
8.17
20.00
38.47
12
600
9.61
23.62
43.91
12
900
F16
9.55
23.62
44.47
14
150
10.68
25.69
46.50
6.89 5.512
4 - .688
14
600
FA16
10.68
26.69
49.75
8.25 6.500
4 - .812
16
150
10.38
27.56
51.37
6.89 5.512
4 - .688
16
600
FA25
10.19
2769
18
150
11.68
27.56
57.00
18
600
11.93
31.81
20
150
10.97
32.25
62.28
20
600
12.57
34.31
24
150
FA14
11.03
36.44
75.61
24
600
13.12
39.38
26 WKM
2 - .250P - .250L
2 - .250P - .500L
2 - .250P - .500L
2 - .250P - .500L
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
6.89 5.512
6.89 5.512
6.89 5.512
4 - .688
4 - .688
4 - .688
L
3.945
3.955
3.945
3.955
3.945
3.955
5.240
5.260
5.240
5.260
5.240
5.260
3.945
3.995
5.010
5.020
3.945
3.955
6.010
6.020
3.945
3.955
6.010
6.020
3.945
3.955
7.010
7.020
3.945
3.955
8.510
8.520
2.50 1.03
2.50 1.03
2.50 1.03
2.50 1.50
2.50 1.50
3.25 1.50
2.50 1.03
2.88 1.50
2.50 1.03
3.12 2.00
2.50 1.03
3.00 2.36
2.50 1.03
3.50 2.75
2.50 1.03
4.50 3.00
P
0.168
0.188
0.168
0.188
0.168
0.188
0.220
0.240
0.220
0.240
0.220
0.240
.168
.188
.220
.240
.168
.188
.220
.240
.168
.188
.220
.240
.168
.188
.220
.240
.168
.188
.223
.237
150
300
400
600
900
1500
2500
476
432
378
378
337
337
218
3x2
165
165
203
239
2 1/2
682
682
558
558
305
1358
1155
1053
1109
1072
966
474
4x3
534
529
597
677
624
2508
2176
1925
1944
1890
1730
725
6x4
886
944
943
1231
5402
5300
4860
4577
4383
3622
2510
8x6
2583
2499
3240
3588
2137
11261
11054
9345
8886
8416
6879
5227
10 x 8
5218
5036
7975
4859
12 x 8
3302
3892
10
19181
18856
15771
14533
14087
11283
8313
12
29435
28980
23834
22729
21025
16843
12282
12 x 10
7875
12799
7299
14
35605
30883
29921
28837
23846
20336
16 x 14
21096
16
49979
42224
41022
39144
33358
27548
21396
20 x 16
13060
15761
18
66156
55740
54277
51368
45004
20
83865
70386
68680
64559
56871
22
86869
85422
80279
24
127916
106835
103504
97240
84836
26
149428
123222
120829
114905
28
176798
144355
142391
135267
30
212313
170229
163776
157401
133706
36
322548
245362
236147
224424
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
WKM 27
150
300
400
600
900
1500
2500
412
373
327
327
291
291
188
3x2
142
142
175
207
2 1/2
590
590
483
483
264
1175
999
911
959
927
835
410
4x3
462
458
516
585
540
2170
1882
1665
1682
1635
1496
627
6x4
766
817
816
1065
4673
4585
4204
3959
3792
3133
2172
8x6
2234
2162
2803
3103
1849
9742
9562
8084
7687
7280
5951
4522
10 x 8
4514
4356
6898
4204
12 x 8
2857
3367
10
16592
16312
13643
12572
12186
9761
7191
12
25463
25070
20617
19662
18188
14570
10624
12 x 10
6812
11072
6314
14
30800
26715
25883
24945
20628
17591
16 x 14
18249
16
43234
36526
35486
33862
28856
23831
18509
20 x 16
11298
13634
18
57228
48218
46953
44436
38930
20
72547
60888
59412
55847
49196
22
75147
73894
69445
24
110654
92417
89536
84117
73388
26
129263
106593
104523
99399
28
152939
124874
123175
117013
30
183661
147257
141674
136160
115662
36
279021
212251
204279
194138
28 WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
100%
80%
60%
% of Total
Flow Area
% of CV
40%
20%
0%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
WKM 29
T-11 Model M - 2 in., 3 in. and 4 in. (50 mm, 80 mm and 100 mm)
ASME Class 600 - 1500 Standard Trim
For non-corrosive aromatic service with concentration of MTBE to 100 percent.
Temperature ratings: -20F to +250F (-29C to +121C).
T-102 High Aromatic (To 100% MTBE) 6 in. - 24 in. (150 mm - 600 mm)
ASME Class 300 - 900
For non-corrosive aromatic service with concentration of MTBE to 100 percent.
Temperature ratings: -20F to +250F (-29C to +121C). Other Trims Available on Request.
30 WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
Body &
Bonnet
Gate
Seat
Stem
Seal
Stem
Bolting
Fittings
Waterflood,
Corrosive
-20F to 250F
-29C to 121C
T-10
WCC
Carbon Steel,
Internally
Coated
Carbon Steel,
Nickel Plated
PTFE Insert
PTFE
Low Alloy
Steel, Nickel
Plated
Alloy
Steel
NACE
Stainless
Steel
Standard
-20F to 250F
-29C to 121C
T-11
2 - 4 in.
only
WCC
Carbon
Steel
Carbon Steel,
Low Alloy Steel,
Nickel Plated
Carbon Steel,
Nickel Plated
PTFE Insert
FKM
Viton
Low Alloy
Steel, Nickel
Plated
Alloy
Steel
Carbon
Steel
Corrosive
Service
-20F to 250F
-29C to 121C
T-22
WCC
Carbon
Steel
410
Stainless
Steel
410
Stainless
Steel
PTFE
17-4 PH
Stainless
Steel
Alloy
Steel
Stainless
Steel
Sour, Mildly
Corrosive
-20F to 250F
-29C to 121C
T-24
2 in. &
larger
WCC
Carbon
Steel
Carbon Steel,
Nickel Plated
PTFE Insert
PTFE
Low Alloy
Steel, Nickel
Plated
Alloy
Steel
NACE
Stainless
Steel
T-36
LCC
Carbon
Steel
Impact
Tested
Nickel Plated
Carbon Steel
300-600 Class
Low Alloy Steel
900 Class
Carbon Steel,
Nickel Plated
PTFE Insert
PTFE
Low Alloy
Steel,
Impact
Nickel
Plated
Alloy
Steel,
Impact
Tested
Stainless
Steel
Low
Temperature,
Sour
-50F to 250F
-46C to 121C
T-37
LCC
Carbon
Steel
Impact
Tested
Nickel Plated
Carbon Steel
300-600 Class
Low Alloy Steel
900 Class
Carbon Steel,
Nickel Plated
PTFE Insert
PTFE
Low Alloy
Steel,
Impact
Nickel
Plated
Alloy
Steel,
NACE,
Impact
Tested
Stainless
Steel
Anhydrous
Ammonia
-20F to 250F
-29C to 121C
T-88
WCC / A36
Carbon
Steel
Carbon Steel
Low Alloy Steel
Nickel Plated
Carbon Steel,
Nickel Plated
PTFE Insert
Low Alloy
Steel, Nickel
Plated
Alloy
Steel,
NACE
Stainless
Steel
Standard
-20F to 350F
-29C to 177C
T-94
WCC
Carbon
Steel
Carbon Steel,
Nickel Plated
PTFE Insert
Special
Low Alloy
Steel, Nickel
Plated
Alloy
Steel
Carbon
Steel
Standard
-20F to 250F
-29C to 121C
T-102
6 in. &
larger
WCC
Carbon
Steel
Carbon Steel,
Nickel Plated
PTFE Insert
PTFE
Low Alloy
Steel, Nickel
Plated
Alloy
Steel
Carbon
Steel
Service
Low
Temperature,
Non-Sour
-50F to 250F
-46C to 121C
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
WKM 31
Aftermarket Services
other valves
Field Service & Technical Support
Remanufactured Products
packages
32 WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
TRADEMARK INFORMATION
WKM is a registered trademark which is owned by Cameron.
This document contains references to registered trademarks or product designations,
which are not owned by Cameron.
Trademark
Owner
Inconel
Monel
Stellite
Teflon
Viton
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M
WKM 33
NOTES
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
_____________________________________________________________________________________________________________
34 WKM
CT-WKM-GATE-SAF-T-SEAL-01
01/11-SWP-3M