Sei sulla pagina 1di 67

DBS3800 V100

Product Description

Issue Date

08 2009-03-31

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company headquarters.

Huawei Technologies Co., Ltd.


Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China http://www.huawei.com support@huawei.com

Website: Email:

Copyright Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions


and other Huawei trademarks are the property of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice
The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but the statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

DBS3800 Product Description

Contents

Contents
About This Document.....................................................................................................................1 1 Changes in the DBS3800 Product Description.....................................................................1-1 2 DBS3800 Product Family..........................................................................................................2-1 3 Introduction to the DBS3800....................................................................................................3-1
3.1 System Architecture of the DBS3800.............................................................................................................3-2 3.2 Logical Structure of the DBS3800..................................................................................................................3-2 3.2.1 Logical Structure of the BBU3806.........................................................................................................3-3 3.2.2 Logical Structure of the BBU3806C......................................................................................................3-4 3.2.3 Logical Structure of the RRU.................................................................................................................3-5 3.3 Software Structure of the DBS3800................................................................................................................3-7

4 Topologies of the DBS3800......................................................................................................4-1


4.1 Network Topologies of the BBU....................................................................................................................4-2 4.1.1 Star Topology ........................................................................................................................................4-2 4.1.2 Chain Topology .....................................................................................................................................4-3 4.1.3 Tree Topology .......................................................................................................................................4-4 4.2 Topologies of the RRU...................................................................................................................................4-5

5 Clock Synchronization Modes of the DBS3800...................................................................5-1 6 Configurations of the DBS3800...............................................................................................6-1 7 Operation and Maintenance of the DBS3800.......................................................................7-1
7.1 OM Modes of the DBS3800............................................................................................................................7-2 7.2 OM Functions of the DBS3800.......................................................................................................................7-3

8 DBS3800 Specifications ............................................................................................................8-1


8.1 Capacity Specifications of the DBS3800........................................................................................................8-2 8.2 RF Specifications of the DBS3800.................................................................................................................8-3 8.3 Engineering Specifications for the DBS3800.................................................................................................8-5 8.3.1 Engineering Specifications of the BBU3806.........................................................................................8-5 8.3.2 Engineering Specifications of the BBU3806C.......................................................................................8-6 8.3.3 Engineering Specifications for the RRU3801C.....................................................................................8-7 8.3.4 Engineering Specifications of the RRU3804.........................................................................................8-8 8.4 Surge Protection Specifications for Ports on the DBS3800............................................................................8-9 Issue 08 (2009-03-31) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. i

Contents

DBS3800 Product Description

8.5 Ports on the DBS3800...................................................................................................................................8-10 8.5.1 Ports on the BBU3806..........................................................................................................................8-11 8.5.2 Ports on the BBU3806C.......................................................................................................................8-13 8.5.3 Ports on the RRU3801C.......................................................................................................................8-14 8.5.4 Ports on the RRU3804..........................................................................................................................8-16 8.6 Compliance Standards of the DBS3800........................................................................................................8-17 8.7 Environment Conditions of the DBS3800....................................................................................................8-18 8.7.1 Working Environment Requirements of the DBS3800........................................................................8-18 8.7.2 Transportation Requirements of the DBS3800....................................................................................8-21 8.7.3 Storage Requirements of the DBS3800...............................................................................................8-24

Index.................................................................................................................................................i-1

ii

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

Figures

Figures
Figure 2-1 Function modules of the DBS3800....................................................................................................2-1 Figure 3-1 System architecture of the DBS3800 .................................................................................................3-2 Figure 3-2 Logical structure of the BBU3806......................................................................................................3-3 Figure 3-3 Logical structure of the BBU3806C...................................................................................................3-4 Figure 3-4 Logical structure of the RRU..............................................................................................................3-6 Figure 3-5 Software structure of the DBS3800....................................................................................................3-7 Figure 4-1 Typical topologies between the RNC and the BBUs.........................................................................4-2 Figure 4-2 Star topology ......................................................................................................................................4-3 Figure 4-3 Chain topology ..................................................................................................................................4-4 Figure 4-4 Tree topology .....................................................................................................................................4-4 Figure 4-5 Typical topologies between the BBU and the RRU3801Cs...............................................................4-5 Figure 7-1 OM subsystem of the NodeB..............................................................................................................7-2

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

iii

DBS3800 Product Description

Tables

Tables
Table 6-1 Typical configurations of the BBU3806 and the RRU3804................................................................6-1 Table 6-2 Typical configurations of the BBU3806 and the RRU3801C.............................................................6-2 Table 8-1 Capacity of the BBU3806....................................................................................................................8-2 Table 8-2 Capacity of the BBU3806 with the EBBC...........................................................................................8-2 Table 8-3 Capacity of the BBU3806C.................................................................................................................8-2 Table 8-4 Capacity of the BBU3806C with the EBBM.......................................................................................8-2 Table 8-5 Capacity of the RRU3801C.................................................................................................................8-3 Table 8-6 Capacity of the RRU3804....................................................................................................................8-3 Table 8-7 Working frequency bands of the DBS3800.........................................................................................8-3 Table 8-8 Output power of each sector configured with a single RRU3801C.....................................................8-4 Table 8-9 Output power of each sector configured with a single RRU3804........................................................8-4 Table 8-10 Receiver sensitivity (configured with RRU3801C, band I)...............................................................8-4 Table 8-11 Receiver sensitivity (configured with RRU3804, band I)..................................................................8-4 Table 8-12 Receiver sensitivity (configured with RRU3804, band //).....................................................8-5 Table 8-13 Receiver sensitivity (configured with RRU3801C, other bands).......................................................8-5 Table 8-14 Power input to the BBU3806.............................................................................................................8-6 Table 8-15 Reliability of the BBU3806...............................................................................................................8-6 Table 8-16 Power input to the BBU3806C..........................................................................................................8-6 Table 8-17 Power input to the RRU3801C..........................................................................................................8-7 Table 8-18 Reliability specifications of the RRU3801C......................................................................................8-8 Table 8-19 Power input to the RRU3804.............................................................................................................8-8 Table 8-20 Reliability specifications of the RRU3804........................................................................................8-8 Table 8-21 Power supply port on the BBU3806................................................................................................8-11 Table 8-22 Transmission ports on the BBU3806...............................................................................................8-11 Table 8-23 Alarm ports on the BBU3806..........................................................................................................8-12 Table 8-24 Specifications of the alarm ports on the BBU3806..........................................................................8-12 Table 8-25 Other ports on the BBU3806............................................................................................................8-12 Table 8-26 Power supply ports on the BBU3806C............................................................................................8-13 Table 8-27 Transmission ports on the BBU3806C............................................................................................8-13 Table 8-28 Alarm ports on the BBU3806C........................................................................................................8-14 Table 8-29 Specifications for the alarm ports on the BBU3806C......................................................................8-14 Table 8-30 Other ports on the BBU3806C.........................................................................................................8-14 Table 8-31 Power supply port on the RRU3801C..............................................................................................8-15 Issue 08 (2009-03-31) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. v

Tables

DBS3800 Product Description Table 8-32 Transmission ports on the RRU3801C............................................................................................8-15 Table 8-33 Alarm port on the RRU3801C.........................................................................................................8-15 Table 8-34 Specifications for the alarm port on the RRU3801C.......................................................................8-15 Table 8-35 Other ports on the RRU3801C.........................................................................................................8-15 Table 8-36 Power supply port on the RRU3804................................................................................................8-16 Table 8-37 Transmission ports on the RRU3804...............................................................................................8-16 Table 8-38 Alarm port on the RRU3804............................................................................................................8-16 Table 8-39 Specifications of the alarm port on the RRU3804...........................................................................8-16 Table 8-40 Other ports on the RRU3804............................................................................................................8-17 Table 8-41 Climatic requirements......................................................................................................................8-18 Table 8-42 Requirements for the density of physically active materials............................................................8-20 Table 8-43 Requirements for the density of chemically active materials..........................................................8-20 Table 8-44 Mechanical stress requirements.......................................................................................................8-20 Table 8-45 Climatic requirements......................................................................................................................8-21 Table 8-46 Requirements for the density of physically active materials............................................................8-22 Table 8-47 Requirements for the density of chemically active materials..........................................................8-22 Table 8-48 Mechanical stress requirements.......................................................................................................8-23 Table 8-49 Climatic requirements......................................................................................................................8-24 Table 8-50 Requirements for the density of physically active materials............................................................8-25 Table 8-51 Requirements for the density of chemically active materials..........................................................8-25 Table 8-52 Mechanical stress requirements.......................................................................................................8-26

vi

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

About This Document

About This Document


Purpose
This document describes the software and hardware structure, subsystems, configuration types, clock synchronization, and topology of the DBS3800. This document also lists the technical specifications of the DBS3800 such as the capacity specifications, RF specifications, engineering specifications, surge protection specifications, and physical interface specifications.

Product Version
The following table lists the product version related to this document. Product Name DBS3800 Product Version V100R008 V100R009 V100R010 V100R011

Intended Audience
This document is intended for:
l l l

Network planners Field engineers System engineers

Change History
For changes in the document, refer to 1 Changes in the DBS3800 Product Description.

Organization
1 Changes in the DBS3800 Product Description This describes the changes in the DBS3800 Product Description. 2 DBS3800 Product Family This describes the function modules and auxiliary facilities in the DBS3800 product family.
Issue 08 (2009-03-31) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 1

About This Document

DBS3800 Product Description

3 Introduction to the DBS3800 The DBS3800 is developed by Huawei Technologies Co., Ltd and is a distributed NodeB in compliance with the protocols of 3GPP R99/R4/R5/R6 FDD. 4 Topologies of the DBS3800 This describes the topologies of the BBU and RRU. 5 Clock Synchronization Modes of the DBS3800 The DBS3800 supports five clock synchronization modes: line clock, GPS clock, BITS clock, IP clock, and internal clock. 6 Configurations of the DBS3800 The DBS3800 supports omni-directional, two-sector, and three-sector configurations. The operator chooses different configurations based on actual conditions such as locations and the number of users. 7 Operation and Maintenance of the DBS3800 The software, hardware, and configuration of the DBS3800 is managed, monitored, and maintained through the DBS3800 Operation and Maintenance (OM). Various modes and platforms are available for the DBS3800 OM and meet different maintenance requirements. 8 DBS3800 Specifications This part describes the specifications for the DBS3800 such as capacity specifications, RF specifications, engineering specifications, surge protection specifications, physical interface specifications, compliance standards, and environment conditions.

Conventions
Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazard with a high level of risk, which if not avoided,will result in death or serious injury. Indicates a hazard with a medium or low level of risk, which if not avoided, could result in minor or moderate injury. Indicates a potentially hazardous situation, which if not avoided,could result in equipment damage, data loss, performance degradation, or unexpected results. Indicates a tip that may help you solve a problem or save time. Provides additional information to emphasize or supplement important points of the main text.

General Conventions
2 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue 08 (2009-03-31)

DBS3800 Product Description

About This Document

The general conventions that may be found in this document are defined as follows. Convention Times New Roman Boldface Italic Courier New Description Normal paragraphs are in Times New Roman. Names of files, directories, folders, and users are in boldface. For example, log in as user root. Book titles are in italics. Examples of information displayed on the screen are in Courier New.

Command Conventions The command conventions that may be found in this document are defined as follows. Convention Boldface Italic [] { x | y | ... } [ x | y | ... ] { x | y | ... }* Description The keywords of a command line are in boldface. Command arguments are in italics. Items (keywords or arguments) in brackets [ ] are optional. Optional items are grouped in braces and separated by vertical bars. One item is selected. Optional items are grouped in brackets and separated by vertical bars. One item is selected or no item is selected. Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected. Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected.

[ x | y | ... ]*

GUI Conventions The GUI conventions that may be found in this document are defined as follows. Convention Boldface > Description Buttons, menus, parameters, tabs, window, and dialog titles are in boldface. For example, click OK. Multi-level menus are in boldface and separated by the ">" signs. For example, choose File > Create > Folder .

Keyboard Operations The keyboard operations that may be found in this document are defined as follows.
Issue 08 (2009-03-31) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 3

About This Document

DBS3800 Product Description

Format Key Key 1+Key 2 Key 1, Key 2

Description Press the key. For example, press Enter and press Tab. Press the keys concurrently. For example, pressing Ctrl+Alt +A means the three keys should be pressed concurrently. Press the keys in turn. For example, pressing Alt, A means the two keys should be pressed in turn.

Mouse Operations The mouse operations that may be found in this document are defined as follows. Action Click Double-click Drag Description Select and release the primary mouse button without moving the pointer. Press the primary mouse button twice continuously and quickly without moving the pointer. Press and hold the primary mouse button and move the pointer to a certain position.

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

1 Changes in the DBS3800 Product Description

1
08 (2009-03-31) 07 (2009-01-23)

Changes in the DBS3800 Product Description

This describes the changes in the DBS3800 Product Description.

This is the seventh commercial release.

This is the sixth commercial release. Compared with issue 06 (2008-10-15), the testing problems are solved.

06 (2008-10-15)
This is the fifth commercial release. Compared with issue 05 (2008-03-17), this issue incorporates the following changes: Topic 8.1 Capacity Specifications of the DBS3800 8.3.2 Engineering Specifications of the BBU3806C Change Description The capacity specifications of the DBS3800 are modified. The engineering specifications of the BBU3806C are modified.

05 (2008-03-17)
This is the fourth commercial release. Compared with issue 04 (2008-01-18), this issue incorporates the following changes: Topic 8.1 Capacity Specifications of the DBS3800 Change Description The capacity specifications of the DBS3800 are modified.
1-1

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

1 Changes in the DBS3800 Product Description

DBS3800 Product Description

Topic 8.2 RF Specifications of the DBS3800

Change Description The RF specifications of the DBS3800 are modified.

04 (2008-01-18)
This is the third commercial release. Compared with issue 03 (2008-01-15), this issue incorporates the following changes: Topic 2 DBS3800 Product Family Change Description A function module, RRU3804, is added to the DBS3800 product family.

03 (2008-01-15)
This is the second commercial release. Compared with issue 02 (2007-09-30), this issue incorporates the following changes: Topic 8.7.1 Working Environment Requirements of the DBS3800 Change Description The Climatic requirements for the operation of the DBS3800 are modified.

02 (2007-09-30)
This is the first commercial release.

01 (2007-08-25)
This is the field trial release.

1-2

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

2 DBS3800 Product Family

2
Function Modules of the DBS3800

DBS3800 Product Family

This describes the function modules and auxiliary facilities in the DBS3800 product family.

The BBU3806, BBU3806C, RRU3801C, and RRU3804 are referred to as the function modules of the DBS3800. Figure 2-1 Function modules of the DBS3800

Function Module BBU3806 BBU3806C RRU3801C RRU3804

Description Indoor baseband unit that processes baseband signals Outdoor baseband unit that processes baseband signals Outdoor remote radio unit. It is responsible for signal processing and transmission between the antenna system and the BBU. Outdoor remote radio unit. It is responsible for signal processing and transmission between the antenna system and the BBU.

The BBU3806, BBU3806C, RRU3801C, and RRU3804 can be combined into a BTS3803 or BTS3803C.
Issue 08 (2009-03-31) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 2-1

2 DBS3800 Product Family


l

DBS3800 Product Description

BTS3803: consists of one BBU3806, one RRU3801C or RRU3804, and the power system. It processes RF and baseband signals and applies to indoor environment. BTS3803C: consists of one BBU3806C and one to three RRU3801Cs or RRU3804s. It processes RF and baseband signals and applies to outdoor environment.

Auxiliary Facilities of the DBS3800


Auxiliary Facility APM30 Description Auxiliary power backup system for outdoor application. The APM30 provides the following functions:
l l l

-48 V DC power output Temperature control 2 U or 7 U space for your devices, depending on the configuration of batteries

For detailed functions of the APM30, refer to the APM30 User Guide. APM100 Auxiliary power backup system for outdoor application. The APM100 provides the following functions:
l l l

-48 V DC power output A maximum of 60 A output 4 U space for your devices

For detailed functions of the APM100, refer to the APM100 User Guide. AFB Auxiliary facility box for outdoor application. The AFB provides the following functions:
l l l l l

Four AC power outputs and four DC power outputs AC surge protection Temperature control Alarm reporting 5 U space for your devices

For detailed functions of the AFB, refer to the AFB User Guide. OFB Outdoor facility box for DC power distribution and transmission. The OFB provides the following functions:
l l l

11 U space for your devices Heat dissipation Alarm reporting

For detailed functions of the OFB, refer to the OFB User Guide.

2-2

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

2 DBS3800 Product Family

Auxiliary Facility SPD40R

Description Outdoor AC surge protection device. The SPD40R provides the following functions:
l l l l

AC surge protection Four AC power inputs Remote fault alarm reporting Local fault alarm reporting

For detailed functions of the SPD40R, refer to the SPD40R User Guide. DPD32-1-6 Indoor facility for DC power distribution. The DPD32-1-6 provides the following functions:
l l

One DC power input at a maximum current of 32 A Six DC power outputs

For detailed functions of the DPD32-1-6, refer to the DPD32-1-6 User Guide. EMUA Environment monitoring unit. The EMUA provides the following functions:
l l l

Environment monitoring Intrusion monitoring Power distribution monitoring

For detailed functions of the EMUA, refer to the EMUA User Guide. Surge Protection Box for Coaxial (SPBC) Surge Protection Box for TwistedPair (SPBT) A small box for indoor application, which provides surge protection for the coaxial cables of the BBU3806. For detailed functions of the SPBC, refer to SPBC. The surge protection unit in the SPBT is optional.
l

The SPBT without the surge protection unit works as a Digital Distribution Frame (DDF). The SPBT with the surge protection unit provides surge protection for twisted pair cables.

For detailed functions of the SPBT, refer to SPBT. Signal Lightning Protection Unit (SLPU) DDF The SLPU protects the E1/T1 signals and Ethernet signals over the BBU3806 from lightning surge. For detailed functions of the SLPU, refer to SLPU. The DDF is used for the E1/T1 cable connections between the BBU3806 and the transmission device. According to installation positions, the DDF falls into two types, namely external DDF and built-in DDF. For detailed functions of the DDF, refer to Built-in DDF.

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

2-3

2 DBS3800 Product Family

DBS3800 Product Description

Auxiliary Facility Indoor centralized mounting rack

Description The indoor centralized mounting rack provides the following functions:
l l

10 U space for 19-inch devices Space for three RRU3801Cs or RRU3804s

For detailed functions of the indoor centralized mounting rack, refer to the Indoor Centralized Mounting Rack Installation Guide.

2-4

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

3 Introduction to the DBS3800

3
About This Chapter

Introduction to the DBS3800

The DBS3800 is developed by Huawei Technologies Co., Ltd and is a distributed NodeB in compliance with the protocols of 3GPP R99/R4/R5/R6 FDD. 3.1 System Architecture of the DBS3800 The function modules in the DBS3800 system enable different WCDMA coverage solutions to meet the requirements in different scenarios. 3.2 Logical Structure of the DBS3800 This describes the logical structure of the BBU3806, BBU3806C, and RRU3801C. 3.3 Software Structure of the DBS3800 The DBS3800 software consists of the platform software, signaling protocol software, operation and maintenance software (OM software), and data center. The latter three are application software while the platform software serves as a support for the others.

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

3-1

3 Introduction to the DBS3800

DBS3800 Product Description

3.1 System Architecture of the DBS3800


The function modules in the DBS3800 system enable different WCDMA coverage solutions to meet the requirements in different scenarios. Figure 3-1 shows the system architecture of the DBS3800 by taking BBU3806 as an example. Figure 3-1 System architecture of the DBS3800

l l

Optical cables are used to connect the BBU3806/BBU3806C to the RRU3801C. A DBS3800 system can be maintained on the Local Maintenance Terminal (LMT) through the BBU3806/BBU3806C. The antenna system receives uplink (UL) signals and transmits downlink (DL) signals.

3.2 Logical Structure of the DBS3800


This describes the logical structure of the BBU3806, BBU3806C, and RRU3801C. 3.2.1 Logical Structure of the BBU3806 The BBU3806 consists of the transport subsystem, baseband subsystem, control subsystem, and interface module. 3.2.2 Logical Structure of the BBU3806C The BBU3806C consists of the transport subsystem, baseband subsystem, control subsystem, and interface module. 3.2.3 Logical Structure of the RRU The RRU consists of the interface module, TRX, Power Amplifier (PA), duplexer, Low Noise Amplifier (LNA), and extension interface.

3-2

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

3 Introduction to the DBS3800

3.2.1 Logical Structure of the BBU3806


The BBU3806 consists of the transport subsystem, baseband subsystem, control subsystem, and interface module. Figure 3-2 shows the logical structure of the BBU3806. Figure 3-2 Logical structure of the BBU3806

Transport Subsystem
The transport subsystem performs the following functions:
l l

Providing physical interfaces between the BBU3806 and the RNC for data communication Providing OM channels between the BBU3806 and the LMT or between the BBU3806 and the M2000

Baseband Subsystem
The baseband subsystem processes uplink and downlink baseband data. The functions of the baseband subsystem are performed by the following modules:
l

Uplink baseband data processing module: consists of the demodulation unit and the decoding unit. In this module, uplink baseband data is processed into despreading soft decision symbols after access channel searching, access channel demodulation, and dedicated channel demodulation. The symbols are then sent to the RNC through the transport subsystem after decoding and Frame Protocol (FP) processing. Downlink baseband data processing module: consists of the modulation unit and the encoding unit. The module receives the service data from the transport subsystem, and implements FP processing, encoding, transport channel mapping, physical channel generating, framing, spreading, modulation, and power control combination. Then the data is finally sent to the interface module.

Control Subsystem
The control subsystem manages the entire distributed NodeB. The control subsystem performs OM, processes signaling, and provides the system clock.
Issue 08 (2009-03-31) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 3-3

3 Introduction to the DBS3800


l

DBS3800 Product Description

The OM module performs functions such as equipment management, configuration management, alarm management, software management, and commissioning management. The signaling processor performs functions such as NBAP signaling processing, ALCAP processing, SCTP processing, and logical resource management. The clock module provides the system clock for the NodeB. The reference sources of the system clock are the Iub phase-lock line clock (obtained from the E1, optical port, or FE), the GPS clock, and the external clock (for instance, the BITS clock). The versions later than V100R009 support the function of extracting the clock from the FE.

Interface Module
The interface module performs the following functions:
l

Each CPRI port of the BBU3806 adopts the Enhanced Small Form-Factor Pluggable (ESFP) optical ports, and transports the uplink and downlink baseband data of the RRU/ pRRU3801/RHUB3808. Each BBU3806 provides an EIa port to share synchronization data, baseband data, power control data, and transmission data between BBU3806s.

3.2.2 Logical Structure of the BBU3806C


The BBU3806C consists of the transport subsystem, baseband subsystem, control subsystem, and interface module. Figure 3-3 shows the logical structure of the BBU3806C. Figure 3-3 Logical structure of the BBU3806C

Transport Subsystem
The functions of the transport subsystem are as follows:
l

Providing physical interfaces between the BBU3806C and the RNC for data communication
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue 08 (2009-03-31)

3-4

DBS3800 Product Description


l

3 Introduction to the DBS3800

Providing OM channels between the BBU3806C and the LMT or between the BBU3806C and the M2000

Baseband Subsystem
The baseband subsystem processes uplink and downlink baseband data. The functions of the baseband subsystem are performed by the following modules:
l

Uplink baseband data processing module: consists of the demodulation unit and the decoding unit. In this module, uplink baseband data is processed into despreading soft decision symbols after access channel searching, access channel demodulation, and dedicated channel demodulation. The symbols are then sent to the RNC through the transport subsystem after decoding and Frame Protocol (FP) processing. Downlink baseband data processing module: consists of the modulation unit and the coding unit. The module receives the service data from the transport subsystem, and implements FP processing, encoding, transport channel mapping, physical channel generating, framing, spreading, modulation, and power control combination. Then the data are finally sent to the interface module.

Control Subsystem
The control subsystem manages the entire distributed NodeB. The subsystem performs OM, processes signaling, and provides the system clock.
l

The OM module has functions such as equipment management, configuration management, alarm management, software management, and commissioning management. The signaling processor has functions such as NBAP signaling processing, ALCAP processing, SCTP processing, and logical resource management. The clock module provides the system clock for the NodeB. The reference sources of the system clock are: the Iub phase-lock line clock (obtained from the E1 link, optical port, or FE link), and the GPS clock. For all versions later than the V100R009, the function of extracting the clock information from the FE link is supported.

Interface Module
Each CPRI port of the BBU3806C adopts the Enhanced Small Form-Factor Pluggable (ESFP) connector, and transports the uplink and downlink baseband data of the RRU.

3.2.3 Logical Structure of the RRU


The RRU consists of the interface module, TRX, Power Amplifier (PA), duplexer, Low Noise Amplifier (LNA), and extension interface. Figure 3-4 shows the logical structure of the RRU.

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

3-5

3 Introduction to the DBS3800

DBS3800 Product Description

Figure 3-4 Logical structure of the RRU

High Speed Interface Module


The functions of the high speed interface module are as follows:
l

Receiving the downlink baseband data from the upper-level equipment such as a BBU or a macro NodeB Transmitting the uplink baseband data to the upper-level equipment such as a BBU or a macro NodeB and forwarding data of the cascaded RRU

TRX
The TRX has two uplink RX channels and one downlink TX channel. Each channel supports two carriers. The functions of uplink RX channels are as follows:
l l l l l l

Down-conversion of the RX signals to IF signals Amplification of the IF signals Analog-to-digital conversion Digital down-conversion Matched filtering Digital Automatic Gain Control (DAGC)

The functions of the downlink TX channel are as follows:


l l l

Shaping and filtering of downlink spreading signals Digital-to-analog conversion Up-conversion of RF signals to the transmitting band

PA
The PA amplifies RF signals of low power. The RF signals are from the RTRX.
3-6 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue 08 (2009-03-31)

DBS3800 Product Description

3 Introduction to the DBS3800

Duplexer
The functions of the duplexer are as follows:
l

Multiplexing RX signals and TX signals. This enables RX signals and TX signals to share the same antenna channel. Filtering RX signals and TX signals.

LNA
The LNA amplifies the signals received from antennas.

3.3 Software Structure of the DBS3800


The DBS3800 software consists of the platform software, signaling protocol software, operation and maintenance software (OM software), and data center. The latter three are application software while the platform software serves as a support for the others. Figure 3-5 shows the software structure of the DBS3800. Figure 3-5 Software structure of the DBS3800

Platform Software
The platform software provides the support for the signaling protocol software, OM software, and data center. The functions of the platform software are as follows:
l l l l l l l

Timing management Task management Memory management Module management Managing the loading and running of the application software Providing message forwarding mechanisms between modules Tracing massages between modules for troubleshooting
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 3-7

Issue 08 (2009-03-31)

3 Introduction to the DBS3800

DBS3800 Product Description

Signaling Protocol Software


The functions of the signaling protocol software are as follows:
l

Processing the radio network layer protocol: The radio network layer protocol mainly performs functions such as configuring the signaling data, processing the NBAP protocol, processing the RRC protocol over BCH, processing the outer loop power control frame and wireless parameter update frame in the FP protocol, mapping and managing the internal physical resources and logical resources of the NodeB. Processing the transport network layer protocol: The transport network layer protocol mainly performs transport data configuration, ALCAP processing, and SAAL processing. Managing the internal logical resources of the NodeB (for example, cells and channels) and the mapping between physical resources and logical resources.

OM Software
The OM software performs OM for the NodeB by working with the LMT or M2000. The functions of the OM software are as follows:
l l l l l l l l l l

Equipment management Data configuration Performance management Commissioning management Alarm management Software management Tracing management Security management Backup management Log management

Data Center
The data center stores the configuration data of each module in XML format.

3-8

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

4 Topologies of the DBS3800

4
About This Chapter

Topologies of the DBS3800

This describes the topologies of the BBU and RRU. 4.1 Network Topologies of the BBU When ATM transport is applied, multiple topologies such as star, chain, and tree are supported between the RNC and the BBUs. When IP transport is applied, the BBU supports the star topology. 4.2 Topologies of the RRU Multiple topologies such as star, chain, and ring are supported between the BBU and RRU3801Cs.

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

4-1

4 Topologies of the DBS3800

DBS3800 Product Description

4.1 Network Topologies of the BBU


When ATM transport is applied, multiple topologies such as star, chain, and tree are supported between the RNC and the BBUs. When IP transport is applied, the BBU supports the star topology. Figure 4-1 shows the typical topologies between the RNC and the BBUs. Figure 4-1 Typical topologies between the RNC and the BBUs

NOTE

l l

The previous figure takes BBU3806 as an example. In the chain and tree topologies, the BBU3806 can support up to five levels of cascading.

4.1.1 Star Topology As the most commonly used topology, the star topology applies to most areas, especially to densely populated areas. 4.1.2 Chain Topology The chain topology applies to the belt-shaped and sparsely populated areas, such as highways and railways. 4.1.3 Tree Topology The tree topology applies to complicated networks and sites such as a large area with concentrated hot spots.

4.1.1 Star Topology


As the most commonly used topology, the star topology applies to most areas, especially to densely populated areas. Figure 4-2 shows this topology.

4-2

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

4 Topologies of the DBS3800

Figure 4-2 Star topology

Advantages:
l

The NodeB is directly connected to the RNC. Therefore, the star topology features simplicity, convenience in maintenance, engineering, and capacity expansion. Direct data transmission is built between the NodeB and RNC and signals travel through fewer nodes, which gives higher transmission reliability.

Disadvantage: Compared with other topologies, the star topology requires more transmission resources.

4.1.2 Chain Topology


The chain topology applies to the belt-shaped and sparsely populated areas, such as highways and railways. Figure 4-3 shows this topology.

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

4-3

4 Topologies of the DBS3800

DBS3800 Product Description

Figure 4-3 Chain topology

Advantage: The chain topology can reduce costs in transmission equipment, engineering, construction, and transmission link lease. Disadvantages:
l l l

Signals travel through many nodes, so the transmission reliability is low. Faults in the upper-level NodeB may affect the lower-level NodeB(s). The number of levels in the chain topology cannot exceed five.

4.1.3 Tree Topology


The tree topology applies to complicated networks and sites such as a large area with concentrated hot spots. Figure 4-4 shows this topology. Figure 4-4 Tree topology

Advantage: The tree topology requires fewer transmission links than star topology. Disadvantages:
4-4 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue 08 (2009-03-31)

DBS3800 Product Description


l

4 Topologies of the DBS3800

Signals travel through many nodes, which causes low transmission reliability and construction and maintenance difficulties. Faults in the upper-level NodeB may affect the lower-level NodeB(s). Capacity expansion is difficult because it may involve major modification to the network architecture. The number of levels in the tree topology cannot exceed five.

l l

4.2 Topologies of the RRU


Multiple topologies such as star, chain, and ring are supported between the BBU and RRU3801Cs. Figure 4-5 shows the typical topologies between the BBU and the RRU3801C. Figure 4-5 Typical topologies between the BBU and the RRU3801Cs

NOTE

The previous figure takes BBU3806 as an example.

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

4-5

DBS3800 Product Description

5 Clock Synchronization Modes of the DBS3800

5
Line Clock

Clock Synchronization Modes of the DBS3800

The DBS3800 supports five clock synchronization modes: line clock, GPS clock, BITS clock, IP clock, and internal clock.

The BBU directly extracts clock signals from the Iub interface such as the E1/FE interface. Then, the BBU outputs the precise 2.048 MHz and 8 kHz clocks after frequency dividing, phase locking, and phase adjusting. The 2.048 MHz and 8 kHz clocks are used for frame synchronization and bit synchronization in the DBS3800.
NOTE

The BBU3806 V100R009 and later directly extracts the clock from the E1/FE port. The BBU3806 V100R008 and before can not directly extracts the clock from the FE port.

GPS Clock
The BBU provides the input port for the GPS clock and obtains the clock through the external GPS device. This enables the BBU to receive GPS clock signals when the upper-level clock is unstable or unavailable.

BITS Clock
The BBU3806 supports the BITS clock mode by providing a port for the 2.048 MHz BITS clock.
NOTE

The BBU3806C does not support the BITS clock mode.

IP Clock
Without requirements for additional hardware, the IP clock is supported through software upgrade, providing IP transport with cost-effective clock solutions.

Internal Clock
The clock module of the BBU uses high-performance Oven Controlled Crystal Oscillator (OCXO) and adopts advanced algorithms and software phase lock technologies. The
Issue 08 (2009-03-31) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 5-1

5 Clock Synchronization Modes of the DBS3800

DBS3800 Product Description

performance of the BBU clock system reaches and exceeds the stratum-3 clock standard and complies with the related protocols in ITU-T G.812 and G.823. In the absence of external clocks, the internal clock can ensure that the NodeB works normally for at least 90 days and its precision can be higher than 0.05 ppm.

5-2

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

6 Configurations of the DBS3800

6
l l
NOTE

Configurations of the DBS3800

The DBS3800 supports omni-directional, two-sector, and three-sector configurations. The operator chooses different configurations based on actual conditions such as locations and the number of users. The DBS3800 supports the following typical configurations: Omni-directional, 1 x 2, 2 x 1, 3 x 1, 3 x 2, 3 x 3, 3 x 4, 6 x 1, and 6 x 2. Six cells. The DBS3800 supports a maximum of 12 cells if the EBBC is configured.
N x M = sector x carrier. For example, 3 x 1 indicates that each of the three sectors has one carrier.

Table 6-1 lists the typical configurations of the BBU3806 and the RRU3804. Table 6-1 Typical configurations of the BBU3806 and the RRU3804 Configuration 1x1 1x2 1x3 1x4 2x1 2x2 2x3 2x4 3x1 3x2 3x3 3x4
Issue 08 (2009-03-31)

Minimum Number of BBU3806s 1 1 1 1 BBU3806 with the EBBC 1 1 BBU3806 with the EBBC 1 BBU3806 with the EBBC 2 BBU3806s with the EBBCs 1 1 BBU3806 with the EBBC 2 BBU3806s with the EBBCs 2 BBU3806s with the EBBCs

Minimum Number of RRU3804s 1 1 1 1 2 2 2 2 3 3 3 3


6-1

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

6 Configurations of the DBS3800

DBS3800 Product Description

Configuration 6x1 6x2

Minimum Number of BBU3806s 1 BBU3806 with the EBBC 2 BBU3806s with the EBBCs

Minimum Number of RRU3804s 6 6

NOTE

In four-carrier configurations such as 1 x 4, 2 x 4, and 3 x 4, if the power required for each carrier is 30 W, the minimum number of RRU3804s doubles.

Table 6-2 lists the typical configurations of the BBU3806 and the RRU3801C. Table 6-2 Typical configurations of the BBU3806 and the RRU3801C Configuration 1x1 1x2 1x3 1x4 2x1 2x2 2x3 2x4 3x1 3x2 3x3 3x4 6x1 6x2 Minimum Number of BBU3806s 1 1 1 1 BBU3806 with the EBBC 1 1 BBU3806 with the EBBC 1 BBU3806 with the EBBC 2 BBU3806s with the EBBCs 1 1 BBU3806 with the EBBC 2 BBU3806s with the EBBCs 2 BBU3806s with the EBBCs 1 BBU3806 with the EBBC 2 BBU3806s with the EBBCs Minimum Number of RRU3801Cs 1 1 2 2 2 2 4 4 3 3 6 6 6 6

6-2

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

7 Operation and Maintenance of the DBS3800

Operation and Maintenance of the DBS3800

About This Chapter


The software, hardware, and configuration of the DBS3800 is managed, monitored, and maintained through the DBS3800 Operation and Maintenance (OM). Various modes and platforms are available for the DBS3800 OM and meet different maintenance requirements. 7.1 OM Modes of the DBS3800 The DBS3800 supports local maintenance, remote maintenance, and reverse maintenance. 7.2 OM Functions of the DBS3800 The DBS3800 provides OM functions such as commissioning management, equipment management, software management, and alarm management.

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

7-1

7 Operation and Maintenance of the DBS3800

DBS3800 Product Description

7.1 OM Modes of the DBS3800


The DBS3800 supports local maintenance, remote maintenance, and reverse maintenance. The OM subsystem provides the following three maintenance modes:
l

Local maintenance: The NodeB is maintained on the Local Maintenance Terminal (LMT) through the local Ethernet port of the NodeB. Remote maintenance: The NodeB is maintained through the IP route provided by the RNC. The maintenance is performed on the M2000 client or the LMT in an Network Management System (NMS) center or an RNC equipment room. Reverse maintenance: Another NodeB is maintained on the LMT through the local Ethernet port of a local NodeB, and the IP route is provided by the RNC.
NOTE

The OM subsystem of the NodeB supports the automatic setup of default maintenance channel. After hardware installation, the NodeB can automatically set up a maintenance channel to the RNC on the ATM network. Through this channel, the maintenance personnel can remotely download data and programs to the NodeB, which enhances the network maintainability.

Figure 7-1 shows the OM subsystem of the NodeB. Figure 7-1 OM subsystem of the NodeB

The OM subsystem of the NodeB consists of the following components:


l l l

LMT: used to maintain single NodeB. M2000: used to maintain multiple NodeBs. OM channel: provides channels between the NodeB and the LMT and between the NodeB and the M2000. NE: refers to the maintained object.

7-2

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

7 Operation and Maintenance of the DBS3800

7.2 OM Functions of the DBS3800


The DBS3800 provides OM functions such as commissioning management, equipment management, software management, and alarm management.

Commissioning Management
Commissioning management provides the following functions:
l

Equipment performance tests, such as CPU usage test, clock source quality test, and power test Routine tests, such as E1/T1 performance statistics and STM-1 performance statistics Service performance tests, such as 141 test, uplink channel scanning, and statistics for service resource usage

l l

Equipment Management
Equipment management involves equipment maintenance and data configuration.
l

Equipment maintenance provides maintenance of equipment or boards, for example, resetting boards, managing the status of equipment, performing self-check on the equipment, performing an active/standby switchover, and calibrating the clock. Data configuration provides configuration, query, and backup of equipment parameters, for example, configuring the parameters of the NodeB clock, algorithm parameters, and RF parameters.

Software Management
Software management provides the following functions:
l l l l

Activating the software Checking the compatibility of software and hardware versions Managing versions, for example, querying hardware and software versions Upgrading the software version

Alarm Management
Alarm management involves equipment alarm management and environment alarm management.
l

Equipment alarm management The alarm management system detects and reports information about faults in real time. The LMT or M2000 then displays the alarm information and provides appropriate handling suggestions. The alarm management system of the M2000 connects to an alarm box through a serial port and supports audible and visual alarms through the LEDs or the alarm box. The maintenance personnel can subscribe to specific alarms. When related alarms are generated, the alarm information is forwarded to their handsets or pagers of the maintenance personnel so that they can rectify the faults in time.

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

7-3

7 Operation and Maintenance of the DBS3800


l

DBS3800 Product Description

Environment alarm management Environment alarm management is intended for equipment rooms of NodeBs. Typically, the equipment rooms are unmanned and distributed over a vast area. The equipment works in a relatively adverse environment, and the fires, water immersion, or flood may incur. To help you handle such emergencies, the NodeB provides a complete alarm monitoring system.

Alarm management provides the following functions:


l l l l l l l

Alarm detecting Alarm reporting Alarm shielding Alarm acknowledgement Pre-processing alarms Alarm correlation processing Alarm processing help

Security Management
The operation rights for maintenance personnel are classified into multiple levels when both NodeB and M2000 are applied. This ensures that the running equipment is free from misoperation.

Environment Monitoring
To help you handle emergencies for normal operation of the equipment, the NodeB provides a complete environment monitoring system. The environment monitoring system provides customized solutions regarding door control, infrared, smoke, water immersion, humidity, and temperature.

7-4

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

8 DBS3800 Specifications

8
About This Chapter

DBS3800 Specifications

This part describes the specifications for the DBS3800 such as capacity specifications, RF specifications, engineering specifications, surge protection specifications, physical interface specifications, compliance standards, and environment conditions. 8.1 Capacity Specifications of the DBS3800 The capacity of the BBU3806/BBU3806C is represented by the number of cells and the number of CEs. The capacity of the RRU3804/RRU3801C is represented by the number of supported sectors and carriers. 8.2 RF Specifications of the DBS3800 The RF specifications of the DBS3800 consist of the working frequency bands, transmitter specifications, and receiver specifications. 8.3 Engineering Specifications for the DBS3800 This describes the engineering specifications for the DBS3800, which consist of the physical dimensions, weight, power input, and power consumption. 8.4 Surge Protection Specifications for Ports on the DBS3800 This describes the surge protection specifications for external ports on the BBU3806, BBU3806C, and RRU3801C. 8.5 Ports on the DBS3800 The ports on the DBS3800 consist of grounding ports, power supply ports, transmission ports, alarm ports, and other ports. 8.6 Compliance Standards of the DBS3800 The DBS3800 complies with the standards of EMC, acoustic noise, working environment, transportation, storage, and anti-seismic performance. 8.7 Environment Conditions of the DBS3800 The environment conditions of the DBS3800 consist of working environment requirements, transportation requirements, and storage requirements.

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

8-1

8 DBS3800 Specifications

DBS3800 Product Description

8.1 Capacity Specifications of the DBS3800


The capacity of the BBU3806/BBU3806C is represented by the number of cells and the number of CEs. The capacity of the RRU3804/RRU3801C is represented by the number of supported sectors and carriers.

Capacity of the BBU3806


Table 8-1 Capacity of the BBU3806 Item Cell Uplink CE Downlink CE Capacity 3 192 256

Table 8-2 Capacity of the BBU3806 with the EBBC Item Cell Uplink CE Downlink CE Capacity 6 384 512

Capacity of the BBU3806C


Table 8-3 Capacity of the BBU3806C Item Cell Uplink CE Downlink CE Capacity 3 128 256

Table 8-4 Capacity of the BBU3806C with the EBBM Item Cell Uplink CE Downlink CE Capacity 6 320 512

8-2

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

8 DBS3800 Specifications

Capacity of the RRU3801C


Table 8-5 Capacity of the RRU3801C Item Maximum sectors Maximum carriers Capacity 1 2

Capacity of the RRU3804


Table 8-6 Capacity of the RRU3804 Item Maximum sectors Maximum carriers Capacity 1 4

8.2 RF Specifications of the DBS3800


The RF specifications of the DBS3800 consist of the working frequency bands, transmitter specifications, and receiver specifications.

Working Frequency Bands


Table 8-7 Working frequency bands of the DBS3800 RRU
l l l l

Frequency Band Band I (2100 MHz)

Receiving Band (MHz) 1920 to 1980

Transmitting Band (MHz) 2110 to 2170

RRU3801C RRU3804 RRU3801C RRU3804

Band II (1900 MHz)

1850 to 1910

1930 to 1990

RRU3801C RRU3801C
l l

Band III/IX (1800 MHz) Band IV (1700 MHz and 2100 MHz) Band V/VI (850 MHz)

1710 to 1785 1710 to 1755 824 to 849

1805 to 1880 2110 to 2155 869 to 894

RRU3801C RRU3804

RRU3801C

Band VIII (900 MHz)

880 to 915

925 to 960

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

8-3

8 DBS3800 Specifications

DBS3800 Product Description

Transmitter Specifications
Table 8-8 Output power of each sector configured with a single RRU3801C Number of Carriers Single carrier Two carriers Output Power per Carrier (W) 40 20 Configuration 1x1 1x2

Table 8-9 Output power of each sector configured with a single RRU3804 Number of Carriers Single carrier Two carriers Three carriers Four carriers Output Power per Carrier (W) 60 30 (20 per carrier with configuration 1001) 20 15 Configuration 1x1 1x2 1x3 1x4

NOTE

The previously mentioned output power refers to the rated output power of each carrier at the TX antenna connector of the DBS3800.

Receiver Sensitivity
Table 8-10, Table 8-11,Table 8-12 and Table 8-13 describe receiver sensitivity of the DBS3800. Table 8-10 Receiver sensitivity (configured with RRU3801C, band I) RX Diversity Mode 1-way 2-way Receiver Sensitivity (dBm)1 -125.5 -128.3 Receiver Sensitivity (dBm)2 -126.2 -129.0

Table 8-11 Receiver sensitivity (configured with RRU3804, band I) RX Diversity Mode 1-way 2-way Receiver Sensitivity (dBm)1 -125.8 -128.6 Receiver Sensitivity (dBm)2 -126.5 -129.3

8-4

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

8 DBS3800 Specifications

Table 8-12 Receiver sensitivity (configured with RRU3804, band //) RX Diversity Mode 1-way 2-way Receiver Sensitivity (dBm)1 -125.3 -128.1 Receiver Sensitivity (dBm)2 -126.0 -129.1

Table 8-13 Receiver sensitivity (configured with RRU3801C, other bands) RX Diversity Mode 1-way 2-way Receiver Sensitivity (dBm)1 -125.3 -128.1 Receiver Sensitivity (dBm)2 -126.0 -128.8

NOTE

l l

1: Receiver sensitivity at the antenna connector of the DBS3800 that complies with 3GPP TS 25.104 and provides 12.2 kbit/s channels with BER less than 0.001 2: Receiver sensitivity (median performance over reception bandwidth) at the antenna connector of the DBS3800 that handles 12.2 kbit/s AMR services with BER less than 0.001

8.3 Engineering Specifications for the DBS3800


This describes the engineering specifications for the DBS3800, which consist of the physical dimensions, weight, power input, and power consumption. 8.3.1 Engineering Specifications of the BBU3806 This describes the engineering specifications of the BBU3806. 8.3.2 Engineering Specifications of the BBU3806C This describes the engineering specifications of the BBU3806C. 8.3.3 Engineering Specifications for the RRU3801C This describes the engineering specifications for the RRU3801C. 8.3.4 Engineering Specifications of the RRU3804 This describes the engineering specifications of the RRU3804.

8.3.1 Engineering Specifications of the BBU3806


This describes the engineering specifications of the BBU3806.

Dimensions
The dimensions of the BBU3806 are 436 mm x 300 mm x 42 mm (width x depth x height).

Weight
The maximum weight of the BBU3806 is 5 kg.
Issue 08 (2009-03-31) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 8-5

8 DBS3800 Specifications

DBS3800 Product Description

Power Input
Table 8-14 Power input to the BBU3806 Rated Voltage -48 V DC +24 V DC Operating Voltage Range -40 V DC to -60 V DC +19 V DC to +29 V DC

Power Consumption
l l

The maximum power consumption of the BBU3806 without the EBBC plugboard is 60 W. The maximum power consumption of the BBU3806 with the EBBC plugboard is 90 W.

Reliability
Table 8-15 Reliability of the BBU3806 MTTR (Mean Time To Repair) One hour MTBF (Mean Time Between Failure) 1.13105 hours AVAILABILIT Y (Availability) 99.9991% 4.7 minutes per year DOWN TIME (Downtime)

8.3.2 Engineering Specifications of the BBU3806C


This describes the engineering specifications of the BBU3806C.

Dimensions
l

The dimensions of the BBU3806C (without the mounting bracket and housing) are 340 mm x 135 mm x 480 mm (W x D x H). The dimensions of the BBU3806C (with the mounting bracket and housing) are 380 mm x 165 mm x 610 mm (W x D x H).

Weight
The maximum weight of the BBU3806C is 15 kg.

Power Input
Table 8-16 Power input to the BBU3806C Rated Voltage -48 V DC 220 V AC
8-6

Operating Voltage Range -40 V DC to -60 V DC 150 V AC to 300 V AC

Remarks 47 Hz to 63 Hz
Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

DBS3800 Product Description

8 DBS3800 Specifications

Power Consumption
l l

If -48 V DC power is used, the maximum power consumption of the BBU3806C is 100 W. If 220 V AC power is used, the maximum power consumption of the BBU3806C is 120 W.

Reliability
MTTR (Mean Time To Repair) One hour MTBF (Mean Time Between Failures) 1.13 x 105 hours AVAILABILITY 99.9991% DOWN TIME (Downtime) 4.7 minutes per year

8.3.3 Engineering Specifications for the RRU3801C


This describes the engineering specifications for the RRU3801C.

Physical Dimensions
l

The dimensions of the RRU3801C (without the bracket and housing) are 365 mm x 145 mm x 480 mm (W x D x H). The dimensions of the RRU3801C (with the bracket and housing) are 380 mm x 200 mm x 610 mm (W x D x H).

Weight
l l

The weight of the RRU3801C without the bracket and housing is 20 kg at most. The weight of the RRU3801C with the bracket and housing is 25 kg at most.

Power Input
Table 8-17 Power input to the RRU3801C Rated Voltage 48 V DC 220 V AC Operating Voltage Range 40 V DC to 60 V DC 150 V AC to 300 V AC Remarks 47 Hz to 63 Hz

Power Consumption
The maximum power consumption of the RRU3801C is 240 W.

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

8-7

8 DBS3800 Specifications

DBS3800 Product Description

Reliability
Table 8-18 Reliability specifications of the RRU3801C MTTR (Mean Time To Repair) One hour MTBF (Mean Time Between Failures) 1.13105hours AVAILABILIT Y 99.9991% DOWN TIME

4.7 minutes/year

8.3.4 Engineering Specifications of the RRU3804


This describes the engineering specifications of the RRU3804.

Dimensions
The dimensions of the RRU3804 (including the housing) are 280 mm x 155 mm x 490 mm (W x D x H).

Weight
The weight of the module is no more than 15 kg. The weight of the module and its housing is no more than 17 kg.

Power Input
Table 8-19 Power input to the RRU3804 Rated Voltage -48 V DC Operating Voltage Range -37 V DC to -60 V DC Remarks -

Power Consumption
The maximum power consumption of the RRU3804 is 280 W.

Reliability
Table 8-20 Reliability specifications of the RRU3804 MTTR (Mean Time To Repair) One hour MTBF (Mean Time Between Failures) 1.0105hours AVAILABILIT Y 99.9991% DOWN TIME

5.28 minutes/year

8-8

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

8 DBS3800 Specifications

8.4 Surge Protection Specifications for Ports on the DBS3800


This describes the surge protection specifications for external ports on the BBU3806, BBU3806C, and RRU3801C.

Surge Protection Specifications for the External Ports on the BBU3806


Application Power supply Surge Protection Mode Differential mode Common mode E1 Differential mode Common mode Differential mode (SPBC) Common mode (SPBC) Differential mode (SPBT) Common mode (SPBT) GPS signal input Differential mode (GPS surge protector) Common mode (GPS surge protector) Dry contact alarms Differential mode Common mode Surge Current 2 kA 4 kA 250 A 250 A 3 kA 5 kA 5 kA 8 kA 8 kA 20 kA 250 A 250 A

Surge Protection Specifications for the External Ports on the BBU3806C


Application 48 V DC power supply Surge Protection Mode Differential mode Common mode 220 V AC power supply Differential mode Common mode E1 Differential mode Common mode GPS signal input Differential mode (GPS surge protector) Common mode (GPS surge protector)
Issue 08 (2009-03-31) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Surge Current 10 kA 15 kA 5 kA 5 kA 3 kA 5 kA 8 kA 20 kA

8-9

8 DBS3800 Specifications

DBS3800 Product Description

Application Dry contact alarms

Surge Protection Mode Differential mode Common mode

Surge Current 250 A 250 A

Surge Protection Specifications for the External Ports on the RRU3801C


Application 48 V DC power supply Surge Protection Mode Differential mode Common mode 220 V AC power supply Differential mode Common mode Differential mode (external surge protector) Common mode (external surge protector) RF Differential mode Common mode Dry contact alarms Differential mode Common mode RET antenna Differential mode Common mode Surge Current 10 kA 15 kA 5 kA 5 kA 60 kA (maximum discharge current) 60 kA (maximum discharge current) 8 kA 5 kA 250 A 250 A 3 kA 5 kA

NOTE

l l

The surge protection specifications are based on the surge waveform of 8/20 s. The surge current, unless otherwise specified as the maximum discharge current, refers to a nominal discharge current.

8.5 Ports on the DBS3800


The ports on the DBS3800 consist of grounding ports, power supply ports, transmission ports, alarm ports, and other ports. 8.5.1 Ports on the BBU3806 The ports on the BBU3806 consist of the grounding screw, power supply port, transmission port, alarm port, and other ports. 8.5.2 Ports on the BBU3806C The ports on the BBU3806C consist of grounding ports, power supply ports, transmission ports, alarm ports, and other ports. 8.5.3 Ports on the RRU3801C
8-10 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue 08 (2009-03-31)

DBS3800 Product Description

8 DBS3800 Specifications

The ports on the RRU3801C consist of grounding ports, power supply ports, transmission ports, alarm ports, and other ports. 8.5.4 Ports on the RRU3804 The ports on the RRU3804 consist of grounding ports, power supply ports, transmission ports, alarm ports, and other ports.

8.5.1 Ports on the BBU3806


The ports on the BBU3806 consist of the grounding screw, power supply port, transmission port, alarm port, and other ports.

Grounding Screws
The BBU3806 has two grounding screws on the front panel.

Power Supply Port


Table 8-21 Power supply port on the BBU3806 Application Power supply port Port Type 48 V DC or +24 V DC power port Quantity 1 Connector Type 7W2 male connector, which shares the socket with the RS485 alarm port

Transmission Ports
Table 8-22 Transmission ports on the BBU3806 Application Iub interface Port Type E1 T1 Unchannelize d STM-1/ OC-3 port Channelized STM-1/OC-3 port Fast Ethernet Quantity 1 (8 E1s) 1 (8 T1s) 2 Data Rate 2.048 Mbit/s 1.544 Mbit/s 155 Mbit/s Connector Type DB44 female connector DB44 female connector ESFP socket

155 Mbit/s

ESFP socket

100 Mbit/s Full-duplex

RJ45 connector

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

8-11

8 DBS3800 Specifications

DBS3800 Product Description

Application Optical interfaces with the RRU3801C, pRRU3801, and RHUB3808 Inter-BBU3806 port

Port Type CPRI

Quantity 3

Data Rate 1.25 Gbit/s

Connector Type ESFP socket

EIa EIb

1 1

31.25 Gbit/s 31.25 Gbit/s

MDR36 connector MDR36 connector

NOTE

l l

The channelized STM-1/OC-3 port and unchannelized STM-1/OC-3 ports are provided by the optical sub-boards. The EIa port enables the high speed interconnection between the BBU3806s. Signals transmitted through the EIa port consist of three 2-way high speed electrical signals at 1.25 Gbit/s, clock signals, and active/standby switchover signals.

Alarms Ports
Table 8-23 Alarm ports on the BBU3806 Application Alarm ports Port Type RS485 alarm port Dry contact alarm port Quantity 1 1 Connector Type 7W2 male connector, which shares the socket with the power supply port RJ45 connector, supporting four dry contact alarm signals

Table 8-24 Specifications of the alarm ports on the BBU3806 Specification Closed-circuit impedance Open-circuit impedance Parameter < 0.2 kilohm > 51 kilohms

Other Ports
Table 8-25 Other ports on the BBU3806 Application GPS signal input Clock signal input/ output Port Type BITS signal input port 10 MHz clock signal output port Quantity 1 1 1 Connector Type SMA female connector SMA female connector SMB male connector

8-12

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

8 DBS3800 Specifications

Application Testing

Port Type 8 kHz Transmission Time Interval (TTI) testing port Serial or Ethernet port

Quantity 1

Connector Type SMB male connector

Commissioning

RJ45 connector

8.5.2 Ports on the BBU3806C


The ports on the BBU3806C consist of grounding ports, power supply ports, transmission ports, alarm ports, and other ports.

Grounding Ports
The BBU3806C has two grounding bolts at the bottom.

Power Supply Ports


Table 8-26 Power supply ports on the BBU3806C Application Power supply ports Port +220 V AC or 48 V DC power Quanti ty 1 Connector Type 9-pin, round, and waterproof

Transmission Ports
Table 8-27 Transmission ports on the BBU3806C Application Iub interface Port E1 T1 Fast Ethernet Quantity 1 (8 E1s) 1 (8 T1s) 1 Data Rate 2.048 Mbit/s 1.544 Mbit/s 100 Mbit/s Full-duplex Optical ports between BBU3806C and RRU InterBBU3806C port CPRI 3 1.25 Gbit/s Connector Type 32-pin, round, and waterproof 32-pin, round, and waterproof 8-pin, round, and waterproof ESFP socket

EIa

31.25 Gbit/s

MDR36 connector

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

8-13

8 DBS3800 Specifications

DBS3800 Product Description

Alarms Ports
Table 8-28 Alarm ports on the BBU3806C Application Alarms ports Port RS485 Four dry contacts Quantity 1 1 Connector Type DB15

Table 8-29 Specifications for the alarm ports on the BBU3806C Specification Closed resistance Open resistance Parameter < 0.2 k ohm >51 k ohm

Other Ports
Table 8-30 Other ports on the BBU3806C Application E1 grounding selection GPS signal input Clock signal input/ output Testing Commissioning Port Grounding connections for eight coaxial E1s 10 MHz clock signal output 8 kHz TTI Testing Serial or Ethernet Quanti ty 1 1 1 1 1 Connector Type 19-pin, round, and waterproof N-type SMB male SMB male RJ45

8.5.3 Ports on the RRU3801C


The ports on the RRU3801C consist of grounding ports, power supply ports, transmission ports, alarm ports, and other ports.

Grounding Ports
The RRU3801C has two grounding bolts at the bottom.

8-14

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

8 DBS3800 Specifications

Power Supply Ports


Table 8-31 Power supply port on the RRU3801C Application Power supply Port +220 V AC or 48 V DC power Quanti ty 1 Connector Type 9-pin, round, and waterproof

Transmission Ports
Table 8-32 Transmission ports on the RRU3801C Port Optical port Quantity 2 Data Rate 1.25 Gbit/s Connector Type ESFP socket

Alarms Ports
Table 8-33 Alarm port on the RRU3801C Application Alarm Port Four dry contacts Quantity 1 Connector Type DB15 connector (sharing the socket with the fan)

Table 8-34 Specifications for the alarm port on the RRU3801C Item Closed resistance Open resistance Specification < 0.2 kilohms > 51 kilohms

Other Ports
Table 8-35 Other ports on the RRU3801C Application RET antenna RF Port Main TX/RX RX diversity Interconnection between combined cabinets
Issue 08 (2009-03-31)

Quanti ty 1 1 1 1

Connector Type DB9 DIN, round, and waterproof DIN, round, and waterproof DB2W2

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

8-15

8 DBS3800 Specifications

DBS3800 Product Description

Application Commissioning

Port Serial Ethernet

Quanti ty 1 1

Connector Type RJ11 RJ45

8.5.4 Ports on the RRU3804


The ports on the RRU3804 consist of grounding ports, power supply ports, transmission ports, alarm ports, and other ports.

Grounding Ports
The RRU3804 has four grounding bolts at the bottom.

Power Supply Ports


Table 8-36 Power supply port on the RRU3804 Application Power supply Port Type -48 V DC power supply Quanti ty 1 Connector Type OT terminal

Transmission Ports
Table 8-37 Transmission ports on the RRU3804 Port Type Optical port Quantity 2 Data Rate 1.25 Gbit/s Connector Type ESFP socket

Alarm Ports
Table 8-38 Alarm port on the RRU3804 Application Alarms Port Type 2-channel dry contact alarms, 1-channel RS485 signals Quantity 1 Connector Type DB15

Table 8-39 Specifications of the alarm port on the RRU3804 Item Closed resistance
8-16

Specification < 0.2 kilohms


Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

DBS3800 Product Description

8 DBS3800 Specifications

Item Open resistance

Specification > 51 kilohms

Other Ports
Table 8-40 Other ports on the RRU3804 Application RET antenna RF Port Type Main TX/RX RX diversity Interconnection between combined modules Quanti ty 1 1 1 1 Connector Type DB9, waterproof DIN, round, and waterproof DIN, round, and waterproof 2W2

8.6 Compliance Standards of the DBS3800


The DBS3800 complies with the standards of EMC, acoustic noise, working environment, transportation, storage, and anti-seismic performance.

EMC
The DBS3800 meets the Electromagnetic Compatibility (EMC) requirements and complies with the following standards:
l l l l

R&TTE Directive 1999/5/EC 3GPP TS 25.113 V4.4.0 (2002-12) ETSI EN 301489-1 V1.2.1 (2000-08) ETSI EN 301908-1 V2.2.1 (2003-10)

Acoustic Noise
The Sound Power Level (SPL) of acoustic noise generated by indoor telecommunication equipment should be lower than 72 dBA, which complies with ETS300 753. The SPL of acoustic noise generated by DBS3800 components are as follows:
l l

The declared SPL of a running BBU3806 is 55 dBA. There is no fan in the BBU3806C and RRU3801C. Thus, there is no acoustic noise.

Working Environment
l

The working environment of the BBU3806 complies with the following standard: ETSI EN300019-1-3 V2.2.2 (2004-07) Class 3.1 Temperature-controlled locations The working environments of the RRU3801C, BBU3806C, and BTS3803C comply with the following standards:
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 8-17

Issue 08 (2009-03-31)

8 DBS3800 Specifications

DBS3800 Product Description

ETSI EN300019-1-4 V2.1.2 (2003-04) Class 4.1 Non-weatherprotected locations 3G TS25.141 V3.0.0

Transportation
The transportation of the DBS3800 complies with the following standard: ETSI EN300019-1-2 V2.1.4 (2003-04) Class 2.3 Public transportation

Storage
The storage of the DBS3800 complies with the following standard: ETSI EN300019-1-1 V2.1.4(2003-04) Class1.2 Weatherprotected, not temperature-controlled storage locations

Anti-Seismic Performance
l

The anti-seismic performance of the BBU3806 complies with the following standard: IEC 60068-2-57 (1999-11) Environmental testing Part 2-57: Tests - Test Ff: Vibration Time - history method

The anti-seismic performance of the RRU3801C, BBU3806C, and BTS3803C complies with the following standard: NEBS GR63 zone4

8.7 Environment Conditions of the DBS3800


The environment conditions of the DBS3800 consist of working environment requirements, transportation requirements, and storage requirements. 8.7.1 Working Environment Requirements of the DBS3800 This part describes the working environment requirements of the DBS3800. 8.7.2 Transportation Requirements of the DBS3800 This part describes the transportation requirements of the DBS3800. 8.7.3 Storage Requirements of the DBS3800 This describes the storage requirements of the DBS3800.

8.7.1 Working Environment Requirements of the DBS3800


This part describes the working environment requirements of the DBS3800.

Climatic Requirements
Table 8-41 lists the climatic requirements for the working environment of the DBS3800. Table 8-41 Climatic requirements Item Altitude
8-18

Specification 4,000 m
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue 08 (2009-03-31)

DBS3800 Product Description

8 DBS3800 Specifications

Item Air pressure Temperature

Specification 70 kPa to 106 kPa


l l l

BBU3806:-5 to +55 BBU3806C:-40 to +50 RRU3801C:


-40 to +50 (with solar) -40 to +55 (without solar) -40 to +50 (with solar) -40 to +55 (without solar)

RRU3804:

Temperature change rate Relative humidity Solar radiation

3/min 5% to 100% Outdoors: 1,120 W/m2 Indoors: 700 W/m2

Thermal radiation Wind speed Noise

600 W/m2 67 m/s Indoor noise pressure level 60 dBA Indoor sound power 7.2 bel Outdoor noise pressure level 65 dBA Outdoor sound power in daytime 6.1 bel; outdoor sound power at night 5.6 bel

Dustproof and waterproof capabilities

Indoors: IP20 Outdoors: IP65

Biological Requirements
The working environment of the DBS3800 should meet the following biological requirements:
l l

The environment is not conducive for the growth of fungus or mildew. There are no rodent animals such as rats.

Air Cleanliness Requirements


The working environment of the DBS3800 should meet the following air cleanness requirements:
l l

There is no explosive, conductive, magneto-conductive or corrosive dust in the air. The density of the physically active materials meets the requirements described in Table 8-42.

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

8-19

8 DBS3800 Specifications

DBS3800 Product Description

Table 8-42 Requirements for the density of physically active materials Physically Active Material Suspended dust Falling dust Sand Note:
l l l l

Unit mg/m3 mg/(m2h) mg/m3

Density 0.01 10 There is no visible sand.

Suspended dust: diameter 75 m Falling dust: 75 m diameter 150 m Sand: 150 m diameter 1,000 m

The density of the chemically active materials meets the requirements described in Table 8-43. Table 8-43 Requirements for the density of chemically active materials Chemically Active Material SO2 NH3 Cl2 Unit mg/m3 mg/m3 mg/m3 Density 1.50 0.15 0.30

Mechanical Stress Requirements


Table 8-44 lists the mechanical stress requirements for the working environment of the DBS3800. Table 8-44 Mechanical stress requirements Item Sinusoidal vibration (ETSI requirements) Sinusoidal vibration (GR63 requirements) Unsteady impact Impact response spectrum II Static payload
8-20

Sub-item Offset Accelerated speed Frequency range

Specification 3.5 mm 2 Hz to 9 Hz 10.0 m/s2 9 Hz to 200 Hz

Frequency range: 51005 Hz; accelerated speed: 1.0 x g; scanning frequency: 0.25 oct/min; triaxial test

100 m/s2 0
Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

DBS3800 Product Description

8 DBS3800 Specifications

Item Anti-seismic requirements

Sub-item Earthquake

Specification Frequency range: 0.3 Hz to 50 Hz Zero Period Acceleration (ZPA): 1.5 x g 30 s

Note:
l

Impact response spectrum refers to the maximum acceleration response curve generated by the equipment under the specified impact excitation. Impact response spectrum II means that the duration of semi-sine impact response spectrum is 6 ms. Static payload refers to the capability of the equipment in a packing case to bear the pressure from the top in normal pile-up method.

8.7.2 Transportation Requirements of the DBS3800


This part describes the transportation requirements of the DBS3800.

Climatic Requirements
Table 8-45 lists the climatic requirements for the transportation environment of the DBS3800. Table 8-45 Climatic requirements Item Altitude Air pressure Temperature Temperature change rate Relative humidity Solar radiation Thermal radiation Wind speed Specification 5,000 m 70 kPa to 106 kPa 40 to +70 3/min 5% to 100% 1,120 W/m2 600 W/m2 67 m/s

Waterproofing Requirements
The transportation environment of the DBS3800 should meet the following waterproofing requirements:
l l

The packing case is intact. The equipment is shaded from the rainwater. Measures are taken to prevent the rainwater from entering the packing case. There is no water on the floor of the transportation vehicle.

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

8-21

8 DBS3800 Specifications

DBS3800 Product Description

Biological Requirements
The transportation environment of the DBS3800 should meet the following biological requirements:
l l

The environment is not conducive for the growth of fungus or mildew. There are no rodent animals such as rats.

Air Cleanliness Requirements


The transportation environment of the DBS3800 should meet the following air cleanness requirements:
l l

There is no explosive, conductive, magneto-conductive or corrosive dust in the air. The density of the physically active materials meets the requirements described in Table 8-46. Table 8-46 Requirements for the density of physically active materials Physically Active Material Suspended dust Falling dust Sand Note:
l l l

Unit mg/m3 mg/(m2h) mg/m3

Density 3.0 100

Suspended dust: diameter 75 m Falling dust: 75 m diameter 150 m Sand: 150 m diameter 1,000 m

The density of the chemically active materials meets the requirements described in Table 8-47. Table 8-47 Requirements for the density of chemically active materials Chemically Active Material SO2 H2S NO2 NH3 Cl2 HCl Unit mg/m3 mg/m3 mg/m3 mg/m3 mg/m3 mg/m3
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Density 0.30 0.10 0.50 1.00 0.10 0.10


Issue 08 (2009-03-31)

8-22

DBS3800 Product Description

8 DBS3800 Specifications

Chemically Active Material HF O3

Unit mg/m3 mg/m3

Density 0.01 0.05

Mechanical Stress Requirements


The transportation environment of the DBS3800 should meet the mechanical stress requirements listed in Table 8-48. Table 8-48 Mechanical stress requirements Item Sinusoidal vibration Sub-item Offset Accelerated speed Frequency range Random vibration Spectral density of accelerated speed Frequency range Unsteady impact Impact response spectrum II Static payload Drop Drop Specification 7.5 mm 2 Hz to 9 Hz 1 m2/s3 20.0 m/s2 9 Hz to 200 Hz 3 dB 40.0 m/s2 200 Hz to 500 Hz Total mean square root accelerated speed: 0.781 Grms

5 Hz to 20 Hz 300 m/s2

20 Hz to 200 Hz

10 kPa When the mass is less than 20 kg, the free fall is less than 1.2 m. When the mass is within the range of 20 kg to 100 kg, the free fall is less than 1.0 m. When the mass is more than 100 kg, the free fall is less than 0.25 m.

Note:
l

Impact response spectrum refers to the maximum acceleration response curve generated by the equipment under the specified impact excitation. Impact response spectrum II means that the duration of semi-sine impact response spectrum is 6 ms. Static payload refers to the capability of the equipment in a packing case to bear the pressure from the top in normal pile-up method.

Issue 08 (2009-03-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

8-23

8 DBS3800 Specifications

DBS3800 Product Description

8.7.3 Storage Requirements of the DBS3800


This describes the storage requirements of the DBS3800.

Climatic Requirements
Table 8-49 lists the climatic requirements for the storage environment of the DBS3800. Table 8-49 Climatic requirements Item Altitude Air pressure Temperature Temperature change rate Relative humidity Solar radiation Thermal radiation Wind speed Specification 5,000 m 70 kPa to 106 kPa 40 to +70 1/min 10% to 100% 1,120 W/m2 600 W/m2 50 m/s

Waterproofing Requirements
The equipment is preferably stored indoors. The indoor storage environment should meet the following waterproofing requirements:
l

No water is on the ground of the room. And there is no probability of water entering the packing case. The equipment is stored far away from automatic fire fighting devices or heating facilities. This prevents water from leaking into the packing case.

If the equipment has to be stored outdoors, the outdoor storage environment should meet the following waterproofing requirements:
l l l l

The packing case is intact. The equipment is shielded from the rainwater. No water is on the ground. And there is no probability of water entering the packing case. The packing case is not exposed to direct sunlight.

Biological Requirements
The storage environment of the DBS3800 should meet the following biological requirements:
l l

The environment is not conducive for the growth of fungus or mildew. There are no rodent animals such as rats.
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue 08 (2009-03-31)

8-24

DBS3800 Product Description

8 DBS3800 Specifications

Air Cleanliness Requirements


The storage environment of the DBS3800 should meet the following air cleanness requirements:
l l

There is no explosive, conductive, magneto-conductive or corrosive dust in the air. The density of the physically active materials meets the requirements described in Table 8-50. Table 8-50 Requirements for the density of physically active materials Physically Active Material Suspended dust Falling dust Sand Note:
l l l

Unit mg/m3 mg/(m2h) mg/m3

Density 5.00 20.0 300

Suspended dust: diameter 75 m Falling dust: 75 m diameter 150 m Sand: 150 m diameter 1,000 m

The density of the chemically active materials meets the requirements described in Table 8-51. Table 8-51 Requirements for the density of chemically active materials Chemically Active Material SO2 H2S NO2 NH3 Cl2 HCl HF O3 Unit mg/m3 mg/m3 mg/m3 mg/m3 mg/m3 mg/m3 mg/m3 mg/m3 Density 0.30 0.10 0.05 1.00 0.10 0.10 0.01 0.05

Mechanical Stress Requirements


The storage environment of the DBS3800 should meet the mechanical stress requirements listed in Table 8-52.
Issue 08 (2009-03-31) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 8-25

8 DBS3800 Specifications

DBS3800 Product Description

Table 8-52 Mechanical stress requirements Item Sinusoidal vibration Sub-item Offset Accelerated speed Frequency range Unsteady impact Impact response spectrum II Static payload Note:
l

Specification 7.0 mm 2 Hz to 9 Hz 250 m/s2 5 kPa 20.0 m/s2 9 Hz to 200 Hz

Impact response spectrum refers to the maximum acceleration response curve generated by the equipment under the specified impact excitation. Impact response spectrum II means that the duration of semi-sine impact response spectrum is 6 ms. Static payload refers to the capability of the equipment in a packing case to bear the pressure from the top in normal pile-up method.

8-26

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Issue 08 (2009-03-31)

DBS3800 Product Description

Index

Index
B
BBU3806 logical structure, 3-3 physical dimension, 8-5 port, 8-11 power consumption, 8-5 power input, 8-5 weight, 8-5 BBU3806C logical structure, 3-4 physical dimension, 8-6 port, 8-13 power consumption, 8-6 power input, 8-6 weight, 8-6 power consumption, 8-7 power input, 8-7 weight, 8-7

S
software structure, 3-7 storage requirement, 8-24 surge protection specification, 8-9 system architecture, 3-2

T
topology, 4-2, 4-5 topology of Macro NodeB chain topology, 4-3 star topology, 4-2 tree topology, 4-4 transportation requirement, 8-21

C
clock synchronization mode, 5-1 compliance standard, 8-17

W
working environment requirement, 8-18

L
logical structure BBU3806, 3-3 BBU3806C, 3-4 RRU, 3-5

O
OM function, 7-3 OM mode, 7-2

P
product family, 2-1

R
RRU logical structure, 3-5 RRU3801C physical dimension, 8-7 port, 8-14
Issue 08 (2009-03-31) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. i-1

Potrebbero piacerti anche