Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CATALOG 15.001.50.006
HSM
Breather Plug
With integral sealing washer
and built-in non-return valve.
Gears
Helical, involute form, alloy steels,
gas carburized and hardened,
shaved and honed (profile ground
on selected sizes) insuring low
noise emission. The hunting tooth
principle adopted to insure
maximum working life.
Shafts
Machined from alloy steels and
precision ground on journals,
gear seatings and extensions.
Tolerances and keyways conform to international standards.
Drain Plugs
Self-sealing intermediate
cover plates, to standard ISO
housing dimensions.
Backstops
(anti-run back device)
Available on all units as an
add-on option.
www.sumitomodrive.com
HSM
Table of Contents
General Information......................................................................................2
Accessories.....................................................................................................4
Dimensions
Sizes 107307........................................................................................24
Sizes 315608.........................................................................................26
Motor Mounts.................................................................................................28
Extended Motor Mounts...............................................................................29
Belt Guards......................................................................................................30
Extended Belt Guards...................................................................................31
Installation.......................................................................................................32
Lubrication......................................................................................................33
HSM Shaft Mounted Speed Reducer
HSM
Higher ratings with a 25 pressure angle and wider gear tooth face for
maximum torque
Keyless shaft connection with Taper-Grip bushing for easy installation
and removal, simple replacement
Heavy duty roller bearings for maximum strength and extended life
AGMA standard bore sizes in both bushed and through-bore simplify
specification and retrofit
CEMA standard screw conveyor options
Optional Taconite sealing systems for effective protection in severe
applications and extended operation
Drop in replacement for all AGMA-style units
Flexible motor mounting capabilities
Backstops with centrifugal lift-off sprags to maximize reliability
Specifications
Shaft Mounted
Speed Reducer
Ratios:
HP:
Sizes:
Bore Sizes:
Mounts:
Applications
DESIGNED TO
CEMA
Specifications
Drive Shaft
HSM
CEMA
SCREW CONVEYOR DRIVE
Speed Reducer
Mounting Adapter
Taper-Grip Bushing
The HSM Shaft Mounted Speed Reducer is secured to the driven shaft by
means of a Taper-Grip bushing that transmits the torque and shock
overload capacity of the selected reducer.
Features
Accessories
Backstops
Belt Guards
Motor Mounts
Direct Drive
Outdoor service,
washdown duty and
taconite type systems
available.
Extends reducer life by
providing additional
barriers to contaminants.
Targeted to specific
application requirements.
Includes both seals and
breather elements.
HSM
CEMA
Screw Conveyor Drives
Page 20
How to Select
How to select an HSM Speed Reducer
Step 1: Collect data about your application
Before starting you need to know the:
Application (e.g. Conveyor, Mixer, etc.)
Hours of Operation per day
Motor Horsepower (HP)
Desired Output Speed
Use the AGMA Load Classification Tables on page 8, based on the application
and number of working hours per day.
Refer to the Speed Reducer Selection Tables for your Classification (I, II or
III). Select the Unit Size based on the applications Motor Horsepower (HP)
and Output Speed (RPM). Determine the Unit Size and the Nominal Ratio.
Note: The selection table ratings are based on a starting load or
momentary overload of:
2 times for Class I
2-3 times for Class II
4 times for Class III
If the application peak loads will exceed these values, select a Speed
Reducer from the next higher class of service, or consult Sumitomo
for exact Power Ratings data.
Refer to the Sheave Diameter Table on page 22. Based on the HSM Speed Reducer Unit Size selected, and the Output Speed RPM.
How to Select
Nomenclature
Reducer
2
Unit Size
Ratio
05
107 C
115 D
203 E
207 F
215 G
307 H
315 J
407 S
415 K
507 L
608 M
14
20
25
C
D
E
F
G
H
J
S
K
L
M
Bushing Code
Bushing
1
Output Shaft/Bore
CODE
Unit Size
Max.
Med.
Min.
107C
115D
1 16
11516
1 8
112
1 16
1716
203E
207F
215G
2316
2716
21516
11516
2316
2716
11116
11516
2316
307H
315J
407S
3716
31516
4716
21516
3716
31516
2716
21516
3716
415K
507L
608M
41516
5716
612
4716
41516
51516
31516
4716
41516
INCHES
107
1 716
115
203
207
1 15 16
2 316
2 716
215
307
2 15 16
3 716
315
407
3 15 16
4 716
415
507
608
4 15 16
5 716
6 12
CLASS NUMBERS
Up to 3 Hrs
per Day
3-10 Hrs
per Day
Over 10 Hrs
per Day
AGITATORS (Mixers)
Pure Liquids
Liquids and Solids
Liquids Variable Density
I
I
I
I
II
II
II
II
II
BLOWERS
Centrifugal
Lobe
Vane
I
I
I
I
II
II
II
II
II
I
II
II
II
II
I
II
II
II
II
II
II
II
II
II
II
CAR DUMPERS
III
III
CAR PULLERS
II
II
CLARIFIERS
II
CLASSIFIERS
II
II
II
II
I
III
III
III
II
III
III
III
II
III
I
I
II
III
I
II
II
III
II
II
III
III
I
I
I
II
II
II
II
III
III
2.50
2.50
2.50
2.50
3.00
2.50
2.50
2.50
2.50
3.00
2.50
3.00
3.00
3.00
3.00
3.00
2.00
3.00
2.00
3.00
2.00
3.00
2.00
3.00
2.00
3.00
2.00
3.50
3.50
2.50
2.50
3.50
3.50
3.00
3.00
3.50
3.50
3.00
3.00
2.50
2.50
2.50
2.50
2.50
2.50
3.00
3.00
3.00
3.00
3.00
3.00
APPLICATION
CRUSHER
Stone or Ore
DREDGES
Cable Reels
Conveyors
Cutter Head Drives
Pumps
Screen Drives
Stackers
Winches
CLASS NUMBERS
Up to 3 Hrs
per Day
3-10 Hrs
per Day
Over 10 Hrs
per Day
III
III
III
II
II
III
III
III
II
II
II
II
III
III
III
II
II
II
II
III
III
III
II
II
I
I
I
I
I
II
I
I
II
I
II
II
II
II
II
II
II
II
Plastics
Variable Speed Drive
Fixed Speed Drive
III
III
III
III
III
III
Rubber
Continuous Screw Operation
Intermittent Screw Operation
III
III
III
III
III
III
FANS
Centrifugal
Cooling Towers
Forced Draft
Induced Draft
Industrial & Mine
I
III
II
II
II
I
III
II
II
II
II
III
II
II
II
FEEDERS
Apron
Belt
Disc
Reciprocating
Screw
I
I
I
II
I
II
II
I
III
II
II
II
II
III
II
FOOD INDUSTRY
Cereal Cooker
Dough Mixer
Meat Grinders
Slicers
I
II
II
I
I
II
II
II
II
II
II
II
ELEVATORS
Bucket
Centrifugal Discharge
Escalators
Freight
Gravity Discharge
EXTRUDERS
General
II
II
II
HAMMER MILLS
III
III
III
HOISTS
Heavy
Medium Duty
Skip Hoist
III
II
II
III
II
II
III
II
II
LAUNDRY TUMBLERS
II
II
II
LAUNDRY WASHERS
II
II
III
Note: [1] Because crane drive selections may require a service factor greater than 2.0, Class Numbers are not applicable. Crane drives are to be selected based upon the gear tooth bending
strength using the numeric service factor shown in the table. In all cases, the pitting resistance service factor shall be a minimum of 1.0.
CLASS NUMBERS
Up to 3 Hrs
per Day
3-10 Hrs
per Day
Over 10 Hrs
per Day
II
III
II
III
II
III
Conveyors
Burner
Main or Heavy Duty
Main Log
Re-saw, Merry-Go-Round
Slab
Transfer
II
II
III
II
III
II
II
II
III
II
III
II
II
II
III
II
III
II
Chains
Floor
Green
II
II
II
II
II
III
Cut-Off Saws
Chain
Drag
II
II
II
II
III
III
III
III
III
Debarking Drums
APPLICATION
CLASS NUMBERS
Up to 3 Hrs
per Day
3-10 Hrs
per Day
Over 10 Hrs
per Day
III
II
III
II
II
III
II
III
II
II
III
II
III
II
II
MIXERS, CEMENT
II
II
II
PAPER MILLS
Agitator (Mixer)
Agitator for Pure Liquors
Barking Drums
Barkers Mechanical
Beater
Breaker Stack
Calender [1]
Chipper
Chip Feeder
Coating Rolls
II
II
III
III
II
II
II
III
II
II
II
II
III
III
II
II
II
III
II
II
II
II
III
III
II
II
II
III
II
II
Conveyors
Chip, Bark, Chemical
Log (including Slab)
II
III
II
III
II
III
[1]
Feeds
Edger
Gang
Trimmer
II
III
II
II
III
II
II
III
II
Couch Rolls
Cutter
Cylinder Molds
II
III
II
II
III
II
II
III
II
Log Deck
Log Hauls Incline Well Type
Log Turning Devices
Planer Feed
Planer Tilting Hoists
Rolls Live-off brg. Roll Cases
Sorting Table
Tipple Hoist
III
III
III
II
II
III
II
II
III
III
III
II
II
III
II
II
III
III
III
II
II
III
II
II
Dryers [1]
Paper Machine
Conveyor Type
II
II
II
II
II
II
Embosser
Extruder
II
II
II
II
II
II
Transfers
Chain
Craneway
II
II
II
II
III
III
Tray Drives
Veneer Lathe Drives
II
II
II
II
II
II
METAL MILLS
Draw Bench Carriage and
Main Drive
II
II
II
Runout Table
Non-reversing
Group Drives
Individual Drives
II
II
II
II
II
II
II
III
II
II
II
II
II
II
II
II
II
III
II
II
II
II
II
II
II
II
II
III
II
II
II
III
II
III
II
III
Reversing
Slab Pushers
Shears
Wire Drawing
Wire Winding Machine
III
II
III
II
II
III
II
III
II
II
III
II
III
II
II
METAL STRIP
PROCESSING MACHINERY
Bridles
Coilers & Uncoilers
Edge Trimmers
Flatteners
Loopers (Accumulators)
Pinch Rolls
Scrap Choppers
Shears
Slitters
II
I
I
II
I
II
II
III
I
II
I
II
II
I
II
II
III
II
II
II
II
II
I
II
II
III
II
II
II
III
II
II
II
II
II
II
I
II
II
II
II
III
II
II
II
II
II
II
I
II
II
II
II
III
II
II
II
II
II
II
I
II
II
Fourdrinier Rolls
(Includes Lump breaker,
dandy roll, wire turning, and
return rolls)
Jordan
Kiln Drive
Mt. Hope Roll
Paper Rolls
Platter
Presses Felt & Suction
Pulper
Pumps Vacuum
Reel (Surface Type)
Screens
Chip
Rotary
Vibrating
Size Press
Supercalender [2]
Thickener (AC Motor)
(DC Motor)
Washer (AC Motor)
(DC Motor)
Wind and Unwind Stand
Winders (Surface Type)
Yankee Dryers [1]
CLASS NUMBERS
Up to 3 Hrs
per Day
3-10 Hrs
per Day
Over 10 Hrs
per Day
PLASTIC INDUSTRY
PRIMARY PROCESSING
Intensive Internal Mixers
Batch Mixers
Continuous Mixers
III
II
III
II
III
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
PUMPS
Centrifugal
Proportioning
I
II
I
II
II
II
Reciprocating
Single Acting,
3 or more cyliners
Double Acting,
2 or more cylinders
II
II
II
II
II
II
I
I
I
I
I
I
II
II
II
III
II
III
II
III
II
II
III
II
II
III
II
II
III
II
III
III
III
III
III
III
II
II
II
II
II
II
II
II
II
Rotary
Gear Type
Lobe
Vane
RUBBER INDUSTRY
Intensive Internal Mixers
Batch Mixers
Continuous Mixers
Mixing Mill
2 smooth rolls
1 or 2 corrugated rolls
Batch Drop Mill 2 smooth rolls
Cracker Warmer
2 roll; 1 corrugated roll
Cracker 2 corrugated rolls
Holding, Feed & Blend
Mill 2 rolls
Refiner 2 rolls
Calenders
SAND MULLER
10
II
II
APPLICATION
CLASS NUMBERS
Up to 3 Hrs
per Day
3-10 Hrs
per Day
Over 10 Hrs
per Day
SEWAGE DISPOSAL
EQUIPMENT
Bar Screens
Chemical Feeders
Dewatering Screens
Scum Breakers
Slow or Rapid Mixers
Sludge Collectors
Thickener
Vacuum Filters
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
SCREENS
Air Washing
Rotary Stone or Gravel
Traveling Water Intake
I
II
I
I
II
I
II
II
I
SCREW CONVEYORS
Uniformly Loaded or Fed
Heavy Duty
I
I
I
II
II
II
SUGAR INDUSTRY
Beet Slicer
Cane Knives
Crushers
Mills (low speed end)
III
II
II
III
III
II
II
III
III
II
II
III
TEXTILE INDUSTRY
Batchers
Calenders
Cards
Dry Cans
Dyeing Machinery
Looms
Mangles
Nappers
Pads
Slashers
Soapers
Spinners
Tenter Frames
Washers
Winders
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
Notes
11
CLASS I
OUTPUT SPEED
RPM
REDUCER NOMINAL
SIZE
RATIO
OUTPUT SPEED
RPM
REDUCER NOMINAL
SIZE
RATIO
25
20
14
5
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
5
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
5
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
5
5
OUTPUT SPEED
RPM
REDUCER
SIZE
NOMINAL
RATIO
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
5
5
25
14
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
5
5
5
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
5
5
5
12
REDUCER NOMINAL
SIZE
RATIO
18 - 23
OUTPUT SPEED
RPM
REDUCER NOMINAL
SIZE
RATIO
OUTPUT SPEED
RPM
CLASS I
REDUCER
SIZE
NOMINAL
RATIO
407S
25
407S
20
407S
14
24 - 37
315J
25
315J
20
315J
14
125 HP (90 kW) Motor
38 - 85
307H
25
21 - 39
608M
307H
20
608M
307H
14
608M
86 - 100
307H
14
40 - 58
507L
101 - 129
215G
5
507L
130 - 239
207F
5
507L
240 - 400
203E
5
59 - 79
507L
30 HP (22 kW) Motor
80 - 100
415K
101 - 119
415K
10 - 15
507L
25
60 HP (45 kW) Motor
120 - 199
407S
507L
20
10
17
608M
25
200 - 370
315J
507L
14
608M
20
16 - 21
415K
25
371 - 400
315J
608M
14
415K
20
18 - 31
507L
25
150 HP (110 kW) Motor
415K
14
507L
20
26 - 48
608M
22 - 27
407S
25
507L
14
608M
407S
20
32 - 44
415K
25
608M
407S
14
415K
20
49 - 58
507L
28 - 45
315J
25
415K
14
507L
315J
20
45 - 65
407S
25
507L
407S
20
315J
14
59 - 100
507L
407S
14
46 - 76
307H
25
101 - 168
415K
66 - 74
315J
25
307H
20
315J
20
169 - 269
407S
307H
14
315J
14
270 - 295
315J
77 - 85
215G
25
75 - 100
315J
14
215G
20
200
HP
Motor
101
119
315J
5
215G
14
120 - 219
307H
5
36 - 54
608M
86 - 100
215G
14
220 - 400
215G
5
608M
101 - 179
215G
5
608M
180 - 309
207F
5
75 HP (55 kW) Motor
55 - 68
608M
310 - 400
203E
5
13 - 23
608M
25
69 - 78
507L
40 HP (30 kW) Motor
608M
20
79 - 82
507L
10 - 11
608M
25
608M
14
170 - 250
415K
608M
20
24 - 41
507L
25
251 - 257
415K
608M
14
507L
20
258 - 280
407S
12 - 21
507L
25
507L
14
281
320
407S
507L
20
42 - 57
415K
25
321 - 370
415K
507L
14
415K
20
22 - 27
415K
25
415K
14
250 HP Motor
415K
20
58 - 78
407S
25
47 - 54
608M
415K
14
407S
20
608M
28 - 39
407S
25
407S
14
608M
407S
20
79 - 84
407S
14
55
78
608M
85 - 100
315J
14
407S
14
79 - 95
608M
101 - 179
315J
5
40 - 69
315J
25
239 - 250
415K
180 - 309
307H
5
315J
20
251 - 270
415K
310 - 400
215G
5
315J
14
70 - 80
307H
25
300 HP Motor
100 HP (75 kW) Motor
307H
20
58 - 78
608M
17 - 30
608M
25
307H
14
79 - 83
608M
608M
20
81 - 100
307H
14
608M
14
101 - 109
307H
5
31 - 61
507L
25
110 - 279
215G
5
507L
20
280 - 400
207F
5
507L
14
50 HP (37 kW) Motor
10 - 15
608M
25
608M
20
Notes: Consult factory for delivery on units with 20:1 ratio.
*Indicates that power is constrained by thermal limitations. Please consult factory for ratings with cooling fans.
25
20
14
25
20
14
14
14
5
5
5
5*
25
20
14
25
20
14
14
5
5
5*
25
20
14
14
14
14*
5
5*
5
5*
5*
25
20
14
14
14*
5
5*
14
14*
CLASS II
OUTPUT SPEED
RPM
REDUCER NOMINAL
SIZE
RATIO
25
20
14
5
25
20
14
5
25
20
14
5
25
20
14
25
20
14
5
25
20
14
25
20
14
25
20
14
5
25
20
14
25
20
14
25
20
14
25
20
14
5
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
5
OUTPUT SPEED
RPM
REDUCER NOMINAL
SIZE
RATIO
OUTPUT SPEED
RPM
REDUCER
SIZE
NOMINAL
RATIO
25
14
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
14
25
20
14
5
5
5
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
14
5
5
5
14
REDUCER NOMINAL
SIZE
RATIO
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
14
14
5
5
5
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
14
5
5
5
25
20
14
25
20
14
25
20
14
OUTPUT SPEED
RPM
REDUCER NOMINAL
SIZE
RATIO
OUTPUT SPEED
RPM
CLASS II
REDUCER NOMINAL
SIZE
RATIO
CLASS III
OUTPUT SPEED
RPM
REDUCER NOMINAL
SIZE
RATIO
OUTPUT SPEED
RPM
REDUCER NOMINAL
SIZE
RATIO
25
20
14
25
20
14
25
20
14
5
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
5
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
5
5
5
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
OUTPUT SPEED
RPM
REDUCER
SIZE
NOMINAL
RATIO
16
REDUCER NOMINAL
SIZE
RATIO
OUTPUT SPEED
RPM
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
14
14
5
5
5
25
20
14
25
20
14
25
20
14
25
20
14
25
20
14
14
5
REDUCER NOMINAL
SIZE
RATIO
45 - 65
66 - 78
79 - 89
90 - 100
101 - 199
200 - 329
330 - 400
608M
608M
608M
507L
507L
507L
415K
415K
415K
407S
407S
407S
407S
315J
315J
307H
215G
25
20
14
25
20
14
25
20
14
25
20
14
14
14
5
5
5
25
20
14
25
20
14
25
20
14
14
14
5
5
5
25
20
14
25
20
14
OUTPUT SPEED
RPM
CLASS III
REDUCER NOMINAL
SIZE
RATIO
25
20
14
25
20
14
14
14
14*
5
5
5
5*
25
20
14
14
14
14*
5
5
5*
25
20
14
14
14*
5
5*
14
14*
17
107C
115D
203E
207F
215G
307H
315J
407S
415K
100
110
120
130
140
6.20
6.49
6.77
7.07
7.36
9.7
10.2
10.6
11.1
11.5
15.2
15.9
16.7
17.4
18.1
22.3
23.4
24.4
25.4
26.5
38.6
40.4
42.2
44.0
45.8
55.4
58.1
60.6
63.2
65.8
85.2
89.2
93.2
97.1
101.1
115.9
121.2
126.7
132.1
137.5
152.5
159.6
166.7
173.9
181.0
150
160
170
180
190
7.64
7.94
8.22
8.52
8.81
12.0
12.4
12.9
13.3
13.8
18.8
19.5
20.2
20.9
21.6
27.5
28.6
29.6
30.7
31.7
47.6
49.4
51.2
53.0
54.8
68.4
70.9
73.6
76.2
78.7
105.1
109.0
113.0
117.1
121.0
142.8
148.3
153.7
159.0
164.5
188.1
195.2
202.4
209.5
216.6
200
210
220
230
240
9.09
9.39
9.67
9.96
10.2
14.2
14.7
15.1
15.6
16.1
22.3
23.1
23.8
24.5
25.2
32.7
33.8
34.8
35.9
36.9
56.6
58.4
60.2
62.0
63.8
81.3
83.9
86.5
89.0
91.7
125.0
129.0
132.9
136.9
140.8
169.9
175.3
180.8
186.1
191.5
223.7
230.8
237.9
245.0
252.1
250
260
270
280
290
10.5
10.8
11.1
11.4
11.7
16.5
17.0
17.4
17.9
18.3
25.9
26.6
27.3
28.0
28.7
37.9
39.0
40.0
41.1
42.1
65.6
67.5
69.2
71.1
72.9
94.3
96.8
99.4
102.1
104.6
144.8
148.9
152.7
155.4
152.2
197.0
202.4
207.7
213.2
214.8
259.2
262.2
253.4
246.7
241.8
300
310
320
330
340
12.0
12.3
12.6
12.9
13.1
18.8
19.2
19.7
20.1
20.6
29.4
30.2
30.9
31.6
32.3
43.2
44.2
45.2
46.3
47.3
74.7
76.5
78.3
80.1
81.9
107.1
109.8
112.4
112.2
111.8
149.9
143.4
142.1
136.2
136.2
211.7
202.4
200.6
192.3
191.9
238.2
227.7
225.7
216.3
215.8
350
360
370
380
390
400
13.4
13.7
14.0
14.3
14.6
14.9
21.0
21.5
21.9
22.4
22.9
23.3
33.0
33.7
34.4
35.1
35.8
36.6
48.4
49.4
50.4
51.5
52.5
53.6
83.7
85.5
87.3
85.8
86.5
83.5
107.5
107.8
103.8
100.0
100.8
97.4
130.9
130.9
126.1
122.4
122.4
118.3
184.8
184.8
178.0
171.5
172.9
167.0
207.9
207.9
200.2
194.4
194.4
187.9
Torque
at 100 RPM
(ft*lb)
326
510
800
1172
2028
2913
4476
6085
8012
Note: [1] Those power ratings highlighted in bold indicate that the power is constrained by thermal limitations.
Please consult factory for ratings with cooling fans.
18
107C
115D
203E
207F
215G
307H
315J
407S
415K
507L
608M
10
12
14
16
18
0.72
0.90
1.06
1.22
1.39
1.14
1.39
1.66
1.92
2.17
1.80
2.20
2.60
3.00
3.42
2.63
3.22
3.81
4.41
5.00
4.55
5.58
6.60
7.63
8.66
6.52
8.01
9.48
11.0
12.4
10.1
12.3
14.6
16.9
19.0
13.7
16.8
19.8
22.9
26.0
18.0
22.0
26.0
30.2
34.2
35.4
42.1
48.7
55.4
61.8
61.8
73.6
85.2
96.7
108.0
20
22
24
26
28
1.56
1.72
1.89
2.05
2.21
2.44
2.70
2.95
3.20
3.47
3.82
4.22
4.64
5.04
5.44
5.61
6.20
6.79
7.39
7.98
9.68
10.7
11.7
12.8
13.8
13.9
15.4
16.9
18.3
19.8
21.3
23.6
25.9
28.2
30.4
29.1
32.2
35.3
38.4
41.4
38.2
42.4
46.4
50.4
54.6
68.4
74.7
81.0
87.3
93.5
119.2
130.2
141.2
151.5
161.7
30
32
34
38
40
2.39
2.55
2.71
2.88
3.04
3.73
3.98
4.25
4.51
4.76
5.85
6.26
6.66
7.07
7.47
8.57
9.17
9.76
10.4
11.0
14.8
15.9
16.9
17.9
18.9
21.3
22.8
24.2
25.7
27.2
32.7
35.0
37.3
39.6
41.8
44.5
47.6
50.7
53.8
56.9
58.6
62.6
66.6
70.8
74.8
99.8
105.7
111.8
124.0
129.8
171.6
181.3
191.1
210.5
220.2
42
46
50
52
54
3.20
3.37
3.54
3.70
3.86
5.02
5.28
5.54
5.79
6.06
7.89
8.29
8.69
9.09
9.51
11.5
12.1
12.7
13.3
13.9
20.0
21.0
22.0
23.1
24.1
28.7
30.2
31.6
33.1
34.6
44.1
46.4
48.7
50.8
53.1
59.9
63.0
66.1
69.2
72.3
78.9
83.0
87.0
91.1
95.2
135.6
146.7
157.6
162.0
168.4
230.0
249.4
267.1
276.9
286.6
58
62
66
70
74
4.04
4.20
4.36
4.53
4.69
6.32
6.57
6.83
7.09
7.35
9.91
10.3
10.7
11.1
11.5
14.5
15.1
15.7
16.3
16.9
25.1
26.1
27.2
28.2
29.2
36.1
37.5
39.0
40.5
42.0
55.4
57.7
59.9
62.2
64.5
75.4
78.4
81.5
84.6
87.7
99.2
103.3
107.3
111.4
115.5
178.1
187.9
197.5
207.3
210.5
302.8
319.0
333.5
348.1
362.7
78
80
85
90
95
100
4.99
5.30
5.59
5.90
6.20
6.20
7.82
8.29
8.77
9.24
9.71
9.71
12.3
13.0
13.8
14.5
15.2
15.2
18.0
19.1
20.2
21.2
22.3
22.3
31.1
33.0
34.9
36.7
38.6
38.6
44.7
47.4
50.1
52.8
55.5
55.5
68.7
72.8
77.0
81.1
85.2
81.7
93.3
99.0
104.6
110.2
115.9
115.9
122.8
130.3
137.7
145.1
152.3
142.8
225.0
207.7
187.9
168.0
159.2
150.3
375.6
330.6
298.1
265.5
250.5
235.5
Torque at
10 RPM
(ft*lb)
383
600
941
1379
2386
3426
5266
7159
9425
18627
32492
Notes:
[1] Those power ratings highlighted in bold indicate that the power is constrained by thermal limitations. Please consult factory
for ratings with cooling fans.
[2] Those power ratings in shaded cells indicate the limit of recommended output speed for 20:1 and 25:1 reducers.
19
Mounting Adapter
Selection Table
Drive Shaft Assembly and Mounting Adapter
Screw
Conveyor
Diameter
(inches)
Drive Shaft
Diameter
(inches)
PART NO.
PART NO.
Drive Shaft
Assembly
Mounting
Adapter
6 - 9[1]
1-1/2"
116C4108-C3
116C4041
9 - 12
12 - 14
12 - 20
2"
2-7/16"
3"
116C4200-C3
116C4207-C3
116C4300-C3
116C4040
6 - 9[1]
1-1/2"
116D4108-C3
116D4041
9 - 12
12 - 14
12 - 20
2"
2-7/16"
3"
116D4200-C3
116D4207-C3
116D4300-C3
116D4040
6 - 9[1]
1-1/12"
116E4108-C3
116E4041
9 - 12
12 - 14
12 - 20
2"
2-7/16"
3"
116E4200-C3
116E4207-C3
116E4300-C3
116E4040
6 - 9[1]
1-1/2"
116F4108-C3
116F4041
9 - 12
12 - 14
12 - 20
2"
2-7/16"
3"
116F4200-C3
116F4207-C3
116F4300-C3
116F4040
215G
9 - 12
12 - 14
12 - 20
18 - 24
2"
2-7/16"
3"
3-7/16"
116G4200-C3
116G4207-C3
116G4300-C3
116G4307-C3
307H
9 - 12
12 - 14
12 - 20
18 - 24
2"
2-7/16"
3"
3-7/16"
315J
12 - 14
12 - 20
18 - 24
407S
12 - 14
12 - 20
18 - 24
Reducer
Size
107C
115D
203E
207F
PART NO.
PART NO.
Top Mount
Belt Guard
(Optional)
PART NO.
Side Mount
Belt Guard
(Optional)
NEMA
Motor Frame
Range
Top Mount
56~184T
116C0220-X
116C6061-X
116C6161-X
56~215T
116D0220-X
116D6061-X
116D6161-X
56~215T
116E0220-X
116E6061-X
116E6161-X
56~215T
116F0220-X
116F6061-X
116F6161-X
116G4040
143T~286T
116G0220-X
116G6061-X
116G6161-X
116H4200-C3
116H4207-C3
116H4300-C3
116H4307-C3
116H4040
143T~286T
116H0220-X
116H6061-X
116H6161-X
2-7/16"
3"
3-7/16"
116J4207-C3
116J4300-C3
116J4307-C3
116J4040
143T~326T
116J0220-X
116J6061-X
116J6161-X
2-7/16"
3"
3-7/16"
116S4207-C3
116S4300-C3
116S4307-C3
116S4040
143T~326T
116S0220-X
116S6061-X
116S6161-X
Note: [1] See view on page 21 for Frame Sizes 107C, 115D, 203E, and 207F, 1-1/2 Shaft with 6-9 Screw Diameter.
20
Dimensions shown are for reference only and are subject to change
without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions (inches)
Unit
D2
Screw Dia.
D1
D3
D4
L1
L2
L3
L4
L5
L6
L7
L8
L10
L11
L12
Unit
D2
Screw Dia.
D1
D3
D4
L1
L2
L3
L4
L5
L6
L7
L8
L10
L11
L12
107C
1-1/2"
115D
1-1/2"
203E
1-1/2" 2" 2-7/16" 3"
3/4
17/32
6.89
9.00
3.00
2.13
3.22
4.65
2.87
1.41
19.74
3.50
6.02
9.52
307H
315J
3/4
21/32
11.42
9.00
3.00
2.13
3.22
4.65
2.87
1.41
19.74
5.71
6.02
11.73
3/4
21/32
11.42
9.69
3.00
2.76
3.22
4.65
2.87
1.41
20.43
5.71
6.02
11.73
3/4
25/32
11.42
9.88
3.00
2.87
3.22
4.65
2.87
1.41
20.61
5.71
6.02
11.73
215G
2" 2-7/16" 3" 3-7/16"
207F
1-1/2"
3" 3-7/16"
2-3/16
21/32
11.4
9.69
3.00
2.76
6.31
8.66
5.71
4.49
30.4
5.71
19.1
24.8
2-3/17
25/32
11.4
9.88
3.00
2.87
6.31
8.66
5.71
4.49
30.6
5.71
19.1
24.8
2-3/18
29/32
11.4
13.13
4.00
3.87
6.31
8.66
5.71
4.49
33.8
5.71
19.1
24.8
Note: [1] See view above for Frame Sizes 107C, 115D, 203E, and 207F, 1-1/2 Shaft with 6-9 Screw Diameter.
HSM Shaft Mounted Speed Reducer
21
Sheave Diameters
Minimum Sheave Diameters (cont.)
Unit
Size
Ratio
20:1
407S
(cont.)
25:1
5:1
415K
14:1
Output
Speed
RPM
10-22
23-28
29-32
33-70
71-78
79-85
86-100
10-18
19-24
25-28
29-38
39-74
75-78
79-90
91-100
100-109
110-119
120-129
130-149
150-229
230-269
270-279
280-289
290-299
300-309
310-319
320-329
330-339
340-349
350-369
370-379
380-400
10-14
15-26
27-37
38-40
41-45
46-50
51-74
75-78
79-80
81-100
3.75
4.00
4.25
4.50
4.75
5.00
5.25
3.00
3.25
3.50
3.75
4.00
4.25
4.50
4.75
15.75
15.50
15.25
15.00
14.75
14.50
13.50
13.00
12.50
12.00
11.25
11.00
10.25
10.00
9.50
9.00
8.50
6.75
7.00
7.25
7.00
7.25
7.00
7.25
7.50
7.75
8.00
Unit
Size
Ratio
20:1
415K
(cont.)
25:1
14:1
507L
20:1
25:1
Output
Speed
RPM
10-12
13-24
25-28
29-32
33-50
51-78
79-80
81-90
91-100
10-20
21-24
25-28
29-32
33-52
53-78
79-80
81-90
91-100
10-15
16-25
26-46
47-52
53-66
67-79
80-84
85-89
90-94
95-100
10-21
22-26
27-32
33-38
39-46
47-58
59-79
80-84
85-89
90-100
10-24
25-30
31-34
35-46
47-79
80-84
85-89
90-94
95-100
4.50
4.75
5.00
5.25
5.50
5.75
6.00
6.25
6.50
4.00
4.25
4.50
4.75
5.00
5.25
5.50
5.75
6.00
9.25
9.00
8.75
9.00
9.25
9.50
8.75
7.50
6.50
6.00
6.25
6.00
6.25
6.50
6.75
7.00
7.25
6.50
5.75
4.75
5.00
5.25
5.50
5.75
6.00
5.25
4.50
4.00
3.50
Unit
Size
Ratio
14:1
608M
20:1
25:1
Output
Speed
RPM
10-11
12-15
16-19
20-23
24-27
28-31
32-37
38-42
43-46
47-50
51-52
53-54
55-70
71-79
80-84
85-89
90-94
95-100
10-17
18-23
24-28
29-30
31-34
35-42
43-50
51-62
63-79
80-84
85-89
90-94
95-100
10-13
14-24
25-28
29-32
33-34
35-40
41-42
43-52
53-77
78-79
80-84
85-89
90-94
95-100
17.50
17.25
17.00
16.75
16.50
16.25
16.00
15.75
16.00
16.25
16.50
16.75
17.00
17.25
15.00
12.75
11.00
10.00
11.50
11.25
11.00
11.25
11.50
12.00
12.50
12.75
13.00
11.00
9.50
8.00
7.25
10.00
9.75
10.00
10.25
10.50
10.75
11.00
11.25
11.50
11.25
9.75
8.25
7.00
6.50
23
24
DIMENSION
A
B
C
D [1]
E
F (key)
G1
G2
H
J
K
L
M
N
O
P
Q
R1
R2
Min.
S
Max.
T
U
V
W
X
Y
AA
BB
CC
HH
JJ
KK
TT
Single Red. Wt. (lbs)
Double Red. Wt. (lbs)
107C
115D
6.38
6.69
2.87
3.23
3.23
3/4 (3/16 x 3/16)
0.16
1.46
4.65
5.45
3.01
0.94
0.79
2.56
0.20
0.39
7.87
11.8
6.57
18.4
24.3
7.32
9.21
3.19
2.95
1.00
3.11
4.72
45
90
4
M10
0.59
2.9
30.9
33.1
3.23
3.66
3.62
15/16 (1/4 x 1/4)
0.16
1.42
5.00
6.65
3.31
1.34
0.94
2.95
0.31
0.51
8.50
13.8
7.44
21.2
27.1
8.58
11.10
3.78
3.54
1.22
3.74
5.31
45
90
4
M10
0.59
3.2
48.5
52.9
203E
UNIT SIZE
207F
215G
307H
9.09
10.28
3.94
4.49
5.43
1-5/16 (5/16 x 5/16)
0.28
1.97
6.85
10.28
5.24
1.65
1.26
3.94
0.47
0.67
8.50
14.8
9.69
24.4
30.4
12.5
16.6
5.63
5.55
1.96
5.88
8.35
30
60
6
M16
0.83
4.4
141.1
152.1
4.53
5.00
5.98
1-11/16 (3/8 x 3/8)
0.28
2.01
7.99
11.57
5.98
2.76
1.97
4.72
0.71
0.63
8.74
14.8
10.4
25.1
31.0
14.4
18.8
6.38
6.14
2.20
6.54
10.04
0
60
5
M20
0.98
4.9
220.5
238.1
207F
215G
307H
5.047
13.587
20.455
25.235
5.047
13.395
20.455
25.235
5.047
13.587
20.455
25.235
7.24
7.91
Refer
Refer to
to Bore
Bore Size
Size table
table on
on page
page 72
3.43
3.74
3.74
4.25
4.09
4.49
1-1/16 (1/4 x 1/4)
1-1/8 (1/4 x 1/4)
0.16
0.28
1.65
1.54
5.31
6.10
7.91
9.35
4.02
4.76
1.34
1.65
0.94
1.26
2.95
3.94
0.31
0.47
0.51
0.67
8.50
8.50
13.8
14.8
7.44
9.69
21.2
24.4
27.1
30.4
10.16
10.9
12.99
15.2
4.61
5.08
4.33
4.94
1.46
1.71
4.57
5.24
6.10
6.89
30
30
60
60
6
6
M10
M12
0.59
0.71
3.6
3.8
68.4
99.2
75.0
108.0
Exact Ratio
Nominal Ratio
5:1
14:1
20:1
25:1
107C
115D
203E
4.941
13.410
20.421
23.544
5.050
13.596
20.466
25.250
5.047
13.587
20.455
25.235
Unit Size
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
25
26
315J
10.7
4.96
5.24
6.69
1-7/8 (1/2 x 1/2)
0.26
1.97
8.46
13.9
5.71
2.76
1.97
4.72
0.71
0.63
8.74
14.8
10.4
25.1
31.0
17.1
22.4
7.68
7.44
2.44
7.87
11.0
0
45
7
M20
0.94
5.62
324
342
407S
UNIT SIZE
415K
507L
10.9
11.4
14.0
Refer
to to
Bore
Size
table
onon
page
72
Refer
Bore
Size
table
page
5.71
7.09
8.50
5.28
5.55
7.99
7.32
8.15
9.37
2-3/16 (1/2 x 1/2)
2-7/16 (5/8 x 5/8)
2-9/16 (5/8 x 5/8)
0.28
0.30
0.87
2.01
2.32
2.17
8.66
8.82
10.6
18.0
20.4
23.2
6.18
6.30
6.30
2.76
2.76
4.33
1.97
1.97
2.99
4.72
4.72
7.09
0.71
0.71
1.02
0.63
0.63
M24
8.74
8.74
10.4
15.7
14.8
14.8
10.4
10.4
25.1
25.1
31.5
31.0
31.0
37.4
21.3
22.4
30.3
28.9
32.0
39.4
10.0
11.1
14.6
10.0
10.5
12.8
2.95
3.67
4.69
10.5
11.1
13.6
11.0
12.60
9.84
5.31
1.34
11.6
7.68
17.9
22.5
22.5
45
45
8
8
8
M20
M20
M16
1.18
0.94
1.06
5.12
5.24
6.50
443
567
483
622
1202
608M
16.0
9.49
8.86
10.9
3-3/8 (7/8 x 7/8)
0.87
2.17
12.5
26.7
7.48
4.33
2.99
7.09
1.02
M24
10.4
15.7
31.5
37.4
34.6
44.9
16.1
14.7
5.24
15.6
12.4
5.12
-1.57
11.0
8.46
21.1
8
M16
1.06
7.40
1632
Exact Ratio
Nominal Ratio
5:1
14:1
20:1
25:1
315J
407S
Unit Size
415K
507L
608M
5.047
13.587
20.455
25.235
5.047
13.587
20.455
25.235
13.270
19.970
24.000
13.260
19.580
24.733
12.850
19.330
22.601
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
27
HSM
CEMA
SCREW CONVEYOR DRIVE
Extended Motor Top-Mounted for use with CEMA Screw Conveyor Drive Option
Model
CD TOP MOUNT
NEMA
CD SIDE MOUNT
Input On Left
CD SIDE MOUNT
Input On Right
Dimensions (in)
CV
Weight
Max
(lb)
16.81
16.73
5.40
6.38
57
70
16.61
16.48
17.33
17.32
5.86
4.76
70
70
18.62
18.62
19.88
19.96
20.79
21.38
11.07
9.33
158
165
20.50
20.50
19.80
19.84
20.94
20.71
10.57
9.61
177
169
Frame Size
Min.
Max.
Min.
Max.
Min.
Max.
107C
115D
56~184T
56~215T
24.6
25.1
29.6
31.1
23.3
23.5
28.4
29.5
21.3
21.1
26.4
27.0
13.62
14.62
16.14
16.10
203E
207F
56~215T
56~215T
26.4
26.9
32.4
32.9
24.4
24.6
30.3
30.6
21.5
21.2
27.4
27.2
14.62
14.62
215G
307H
143T~286T
143T~286T
31.6
32.3
40.1
40.8
29.0
29.8
37.5
38.3
25.1
25.5
33.6
33.9
315J
407S
143T~326T
143T~326T
33.4
36.1
42.9
45.6
29.8
30.4
39.2
39.7
25.0
24.6
34.4
33.9
CH
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
HSM Shaft Mounted Speed Reducer
29
107C
115D
203E
207F
215G
307H
315J
407S
415K
11.0
14.5
25.5
15.9
53.0
6.0
10.9
23.0
17.8
23.0
11.0
14.5
25.5
15.0
53.0
6.0
11.6
23.0
20.5
25.5
11.0
14.5
25.5
14.5
53.0
6.0
12.4
23.0
22.3
27.3
12.0
18.0
30.0
19.2
61.0
8.0
15.2
27.0
24.5
32.0
12.0
18.0
30.0
18.6
61.0
8.0
16.4
27.0
25.0
32.3
12.0
18.0
30.0
17.3
61.0
8.0
16.8
27.0
27.8
36.0
12.0
18.0
30.0
14.8
61.0
8.0
17.0
27.0
30.8
39.0
12.0
18.0
30.0
14.3
71.0
9.0
18.3
27.0
38.3
47.8
203E
207F
215G
307H
315J
407S
415K
107C
115D
16.5
13.5
30.0
13.2
48.0
6.0
10.9
23.0
16.5
21.3
16.5
13.5
30.0
13.1
48.0
6.0
11.6
23.0
18.5
23.0
16.5
13.5
30.0
12.9
48.0
6.0
12.4
23.0
20.0
24.8
20.7
10.0
30.7
15.3
56.0
8.0
15.2
27.0
22.0
29.3
20.7
10.0
30.7
15.0
56.0
8.0
16.4
27.0
22.3
29.5
20.7
10.0
30.7
14.8
56.0
8.0
16.8
27.0
24.0
32.3
20.7
10.0
30.7
14.3
56.0
8.0
17.0
27.0
25.0
33.3
20.7
10.0
30.7
13.6
65.0
9.0
18.3
27.0
34.5
44.0
Note: [1] The belt guard should be selected based on the maximum sheave diameter (I Max) that will be used in the application.
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
30
HSM
CEMA
SCREW CONVEYOR DRIVE
107C
115D
203E
207F
215G
307H
315J
407S
11.3
14.2
25.5
13.9
53.0
6.0
11.3
23.0
25.1
31.1
11.3
14.2
25.5
13.1
53.0
6.0
11.5
23.0
26.4
32.4
11.3
14.2
25.5
12.5
53.0
6.0
12.4
23.0
26.9
32.9
13.2
16.8
30.0
19.4
68.4
8.0
15.3
27.0
31.6
40.1
13.2
16.8
30.0
18.8
68.4
8.0
16.4
27.0
32.3
40.8
12.2
17.8
30.0
17.5
68.4
8.0
16.9
27.0
33.4
42.9
12.2
17.8
30.0
14.9
68.4
8.0
17.1
27.0
36.1
45.6
107C
115D
203E
207F
215G
307H
116C6161-X
116D6161-X
116E6161-X
116F6161-X
116G6161-X
116H6161-X
AL
AR
BL
BR
10.3
7.7
7.7
10.3
18.0
7.4
9.4
40.0
5.0
10.0
13.0
23.3
21.3
28.4
26.4
16.6
13.4
13.4
16.6
30.0
12.6
15.2
48.0
6.0
11.4
23.0
23.5
21.1
29.5
27.0
16.9
13.1
13.1
16.9
30.0
12.3
15.2
48.0
6.0
11.6
23.0
24.4
21.5
30.3
27.4
17.4
12.6
12.6
17.4
30.0
12.2
15.6
48.0
6.0
12.5
23.0
24.6
21.2
30.6
27.2
20.0
15.0
15.0
20.0
35.0
14.5
18.5
58.3
8.0
15.3
27.0
29.0
25.1
37.5
33.6
20.4
14.6
14.6
20.4
35.0
14.3
18.7
58.3
8.0
16.4
27.0
29.8
25.5
38.3
33.9
C
DL
DR
E
F
H
I Max[1]
CDL MIN
CDR MIN
CDL MAX
CDR MAX
315J
407S
116J6161-X 116S6161-X
23.7
17.3
17.3
23.7
40.9
14.8
19.7
60.2
8.0
16.9
27.0
29.8
25.0
39.2
34.4
24.3
16.6
16.6
24.3
40.9
14.3
20.2
60.2
8.0
17.1
27.0
30.4
24.6
39.7
33.9
Notes:
[1] The belt guard should be selected based on the maximum sheave diameter (I Max) that will be used in the application.
[L] Input Shaft on left side.
[R] Input Shaft on right side.
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
HSM Shaft Mounted Speed Reducer
31
Installation
Gearbox Installation
Satisfactory performance depends
on proper installation, lubrication
and maintenance. Therefore it is
important that the instructions in
the Installation and Maintenance
leaflet, supplied with each
gearbox, are followed carefully.
Some of the important aspects of
belt and torque-arm installation
are listed below.
Install pulley on gearbox input
shaft as close to the reducer as
Fig 2
Fig 1
Belt drive may be
located to the
right if desired.
If output hub
rotates clockwise,
position Belt drive
and Torque arm in
opposite direction
to that shown in
the illustration.
This angle should
be a right angle
but may vary up to
a maximum of 15
either way.
Fig 4
Torque arm and
belt take up.
Fig 3
Lubrication
Unit
Size
107C
115D
203E
207F
215G
307H
315J
407S
415K
507L
608M
Ratio = 5:1
Mounting Position
Mounting Position
0.13
0.21
0.32
0.66
0.87
1.08
1.51
2.88
4.02
0.13
0.24
0.45
0.69
0.85
1.40
2.27
4.86
5.73
0.13
0.21
0.37
0.63
0.85
1.08
1.56
3.59
6.66
0.16
0.26
0.48
0.66
0.87
1.53
2.27
4.86
5.47
0.11
0.18
0.26
0.61
0.79
1.00
1.43
2.40
3.36
5.94
9.51
0.16
0.24
0.48
0.69
0.85
1.45
2.25
4.33
5.73
9.11
13.2
0.13
0.21
0.37
0.63
0.85
1.11
1.56
3.33
4.15
13.7
20.9
0.16
0.24
0.42
0.58
0.85
1.35
2.19
4.07
5.07
7.13
11.9
Filter plug
Level plug
Drain plug
Recommended Lubricants
Table 5. Mineral Oil
5:1 RATIO REDUCERS
Ambient
Temp.
F
0-100
RPM
101-200
RPM
201-400
RPM
107C-407S 107C-407S
I.S.O.
Viscosity
Grade
14 to 40
100
107C
100
0-20
RPM
21-50
RPM
51-120
RPM
0-50
RPM
100
68
150
150
150
100
100
51-80
RPM
415K-608M
100
100
41 to 80
460
320
320
220
680
680
460
460
320
320
220
81 to 105
800
680
680
460
800
800
800
680
460
460
320
CASTROL
ALPHAZN
ORSP
MOBIL
MOBILGEAR
& SHC
SHELL
OMALA
TEXACO
MEROPA
EXXON
SPARTAN
Note: Do not use E.P. mineral oils other than those recommended when using a backstop.
Taper-Grip Bushing
Table 1. Taper-Grip Bushing Screw Torques
SM-Shaft
Mount Size
107C
115D
203E
207F
215G
307H
315J
407S
415K
507L
608M
Original
Taper-Grip Bushing
Screw Torque
New STEEL
Taper-Grip Bushing
Screw Torque
Nm
lb. ft.
Nm
lb. ft.
31
31
51
51
128
245
245
245
245
245
245
23
23
37.5
37.5
94
180
180
180
180
180
180
50
55
75
140
250
250
250
250
300
300
330
37
41
56
104
185
185
185
185
223
223
223
Tolerance
3/4 - 1 1/8
1 3/16 - 2
2 1/16 - 3 1/8
3 3/16 - 4 3/4
4 13/16 - 6 1/2
+0 -.005
+0 -.006
+0 -.007
+0 -.008
+0 -.009
Standard
Taper-Grip
33
WORLDWIDE LOCATIONS
Mexico
Europe
Mid-West
Monterrey
Austria
Belgium
France
Germany
Italy
Netherlands
Spain
Sweden
West
Sumitomo Machinery Corporation of America
2375 Railroad Street
Corona, CA 92880-5411
Tel: 951-340-4100 Fax: 951-340-4108
Southwest
Sumitomo Machinery Corporation of America
1420 Halsey Way #130
Carrollton, TX 75007
Tel: 972-323-9600 Fax: 972-323-9308
Canada
Toronto (East)
SM-Cyclo of Canada, Ltd.
870 Equestrian Court
Oakville, Ontario, Canada L6L 6L7
Tel: 905-469-1050 Fax: 905-469-1055
Mexico City
SM-Cyclo de Mexico, S.A. de C.V.
Privada Ceylan No. 59-B Bis
Colonia Industrial Vallejo
Delegacion Azcapotzalco, DF Mexico 2300
Tel: 011-52-55-5368-7172 Fax: 011-52-55-5368-6699
South America
Brazil
SM-Cyclo Redutores do Brasil Ltda.
Av. Fagundes Filho, 191
Ed. Houston Office Centercj. H123
CEP: 04304-010So Paulo, Brazil
Tel: 011-55-11-5585-3600 Fax: 011-55-11-5585-9990
Asia
China
Hong Kong
Indonesia
Korea
Malaysia
Philippines
Taiwan
Thailand
Chile
Vancouver (West)
SM-Cyclo of Canada, Ltd.
740 Chester Road, Annacis Island, Delta
B.C., Canada V3M 6J1
Tel: 604-525-5403 Fax: 604-525-0879
Argentina
Montreal
SM-Cyclo of Canada, Ltd.
226 Migneron Street
St. Laurent, Quebec, Canada H4T 1Y7
Tel: 514-340-1300 Fax: 514-340-1343
World Headquarters
Japan
Sumitomo Heavy Industries, Ltd.
Power Transmission & Controls Group
5-9-11, KITA-Shinagawa, Shinagawa-Ku
Tokyo 141-8686 Japan
Tel: 011-813-5488-8363 Fax: 011-813-5488-8365
SM-Cyclo de Argentina SA
Manuel Montes de Oca 6719
B1606 BMG, Munro
Buenos Aires, Argentina
Tel: 011-54-11-4765-5332 Fax: 011-54-11-4765-5517
Other Locations
Australia
India
New Zealand
South Africa