Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
partial or total reproduction in any way is forbidden without explicit owner authorization. System features can change without notification, due to our innovation and improvement policy. Information shown is only for consultation.
Compaa Europea del Agua S.A. Polgono Industrial Rosanes C/ Alemania R.F. 21-25 08769 Castellv de Rosanes Barcelona - Spain Tel: +34 937 766 344 Fax: +34 937 741 104
DOMESTIC
COMMERCIAL
INDUSTRIAL
VALVE CONTROL
Softening
ELECTRONIC
Regeneration Samples
ELECTROMECHANICAL
REGENERATION
CHRONOMETRIC CONTROL
VOLUMETRIC
SEMIAUTOMATIC DIRECTION
DOWN FLOW
UP FLOW
DELAYED
IMMEDIATE START
VARIABLE BRINING
SALT
RESIN
WEIGHT
WHAT IS WATER SOFTENING? Softening is a process used to remove undesired minerals from water, mainly Calcium and Magnesium. For this process to occur, water must flow through a resin bed, where the ion exchange takes place.
SOFTENING CYCLE
During the softening cycle, calcium and magnesium ions contained in the water adhere to the resin causing sodium ions to be released in order to restore equilibrium. The degree of efficiency during the process depends on the type of resin applied.
STANDARD RESIN During the ion exchange process, the resin retains calcium and magnesium ions temporarily, releasing sodium ions in return. The spheres of the standard resin have an average diameter of 0,6 mm with great size differences between spheres. Standard resin has limited performance.
VALVE
Regenerated resin
SOFT WATER
HARD WATER HIGH FLOW RESIN The latest innovation is the HIGH FLOW RESIN that allows maximun efficiency and performance. Its average diameter of 0,3 mm and its homogenous size create a greater contact surface.
RESIN TANK
The peak flow rate of the system increases fourfold generating water and salt savings of up to 20% and 15% respectively.
BRINE TANK
The water intake is driven towards the resin tank were it softens as it flows downward through the resin. The water then ascends from the bottom of the resin tank and is driven to the outlet valve.
REGENERATION EXPLAINED The softening cycle saturates the resin with Calcium and Magnesium ions. In order to restore initial properties a regeneration cycle must be performed.
REGENERATION CYCLE
During the regeneration cycle, brine flows through the resin bed exchanging calcium and magnesium ions for sodium ions.The resin recovers its softening capacity. This process will be more or less efficient depending on the chosen regeneration type.
Saturated resin
VALVE
DOWN FLOW
(1) BACKWASH
(2) BRINING
Regeneration
The flow direction in the softening cycle is downward, so the upper part of the resin bed is the most saturated. The regenerant circulates throught the resin bed in the same direction at the service flow, from top to bottom, thereby dragging the highest concentration of impurities from the upper resin bed throughout the tank. This makes the quantity of water, brine and time needed to complete the process effectively very high.
The brine is suctioned and driven through the valve towards the bottom of the tank, where it flows through the resin bed until it reaches the outlet.
UP FLOW
(1) BRINING
(2) BACKWASH
The flow directions during the service cycle and regeneration cycle are the opposite: The flow direction in the regeneration cycle is upward, so it produces a back wash that spands the resin bed, removes the upper level impurities in a direct way and regenerates the resin in an effective way. With this process, savings of up to 60% in water and up to 50% in regenerant can be obtained.
RESIN TANK BRINE TANK
The combination of both high flow resin and up flow regeneration increases performance of the system and reduces water and salt consumption during the regeneration cycle.
SYSTEM
RESIN
SYSTEM CAPACITY SYSTEM FLOW RATE
EQUIPMENT FEATURES
SOFTENER
SIZE savings savings savings savings REG. CYCLE
REGENERATION
REGENERATION CYCLE
TYPE
TYPE
WATER CONSUMPTION
SALT CONSUMPTION
TIME REGENERATION
STANDARD
30 L
4 DAYS
0%
2250 L
0%
45 Kg
0%
1h 30min
0%
10 x 35
STANDARD
35 L
5 DAYS
0%
1050 L
53 %
21 Kg
53 %
1h 5min
19 %
10 x 35
15 L
10 x 17
2 DAYS
50 %
787 L
65 %
15 Kg
67 %
32min
60 %
Compact domestic softener *Resin tank outside the softeners cabinet, independent brine tank with removable lid. *UF models include Up-Flow regeneration piston resulting in savings in water and regenerant. *Electronic display.
Power supply 230V/50Hz (110V/60Hz Opt.) Connections 1 G Operating pressure 1,8 - 8 bar Water temperature 5-45C Dimensions (A x B x C) 1150 x 430 x 480 680 x 430 x 480 By- pass Optional
200 E-DF
A-403232 MODEL FORUM
220 E-UF
A-403203 FORUM
300 E-DF
A-403332 FORUM
VALVE
CONTROL
1000
1100
1500
1750
1500
2250
CONTROL
REGENERATION
DIRECTION
START
2,2
5,4
3,5
0,9
1,35
(Litres) CAPACITY
20
22
30
35
10
15
RESIN
120
132
180
210
66
99
WEIGHT (Kg)
39,5
41,5
48
53
20
25
Compact domestic softener *Resin tank outside the softeners cabinet, independent brine tank with removable lid. *UF models include Up-Flow regeneration piston resulting in savings in water and regenerant. *Electronic display.
VALVE
Power supply 120V/50Hz (110V/60Hz Opt.) Connections 1 G Operating pressure 1,5 - 6 bar Water temperature 5-45C Dimensions (A x B x C) 1100 x 350 x 620 710 x 350 x 620 By- pass Optional
200 DF
A-404232 MODEL OLYMPIA
220 UF
A-404202 OLYMPIA
300 DF
A-404332 OLYMPIA
350 UF
A-404302 OLYMPIA
CONTROL
1000
1100
1500
1750
1500
2250
CONTROL
REGENERATION
DIRECTION
START
2,2
5,4
3,5
0,9
1,35
(Litres) CAPACITY
20
22
30
35
10
15
RESIN
120
132
180
210
66
99
WEIGHT (Kg)
39
41
46
51
23,5
28,5
Compact domestic softener *Resin tank outside the softeners cabinet, independent brine tank with removable lid. *UF models include Up-Flow regeneration piston resulting in savings in water and regenerant. *Electronic display.
Power supply 230V/50Hz (110V/60Hz Opt.) Connections 1 G Operating pressure 1,8 - 8 bar Water temperature 5-45C Dimensions (A x B x C) 1170 x 430 x 480 700 x 430 x 480 By- pass Optional
200 DF
A-714003 MODEL VK DF
220 UF
A-714002 VK UF
300 DF
A-714001 VK DF
350 UF
A-714000 VK UF
VALVE
CONTROL
1000
1100
1500
1750
1500
2250
CONTROL
REGENERATION
DIRECTION
START
2,2
5,4
3,5
0,9
1,35
(Litres) CAPACITY
20
22
30
35
10
15
RESIN
120
132
180
210
66
99
WEIGHT (Kg)
40
42
48,5
53,5
20
25
Compact domestic softener *Resin tank integrated in the softeners cabinet, brine tank with removable lid. *SE models come with white softener cover. *LOG models allow automatic regeneration interval calculation according to water hadness and resin volume. *The Keramis valve models incorporate a hydraulic distribution system with ceramic core.
200C
Power supply 100-240Vac / 50-60 Hz (Keramis) 230Vac / 50-60Hz (110V/60Hz Opt.) Connections 1 3/4 (85C y 120C Keramis) Operating pressure 1,5 - 6 bar Water temperature 5-45C Dimensions (A x B x C) 1174 x 378 x 515 By- pass Optional FLECK AUTOTROL KERAMIS
K63B-1 DF A-400212
200V
5600 DF* A-400203 5000 SE DF A-400210 LOGIX 255/760 A-400204 K63B-3 VOL DF A-400211
220V UF
5000 SE UF A-400214
300C
300V
5600 DF* A-400303 5000 SE DF A-400311 LOGIX 255/760 A-400305 K63B-1 VOL DF A-400313
350V UF
5000 SE UF A-400315
K63B-1 DF A-400312
VALVE
CONTROL
1000
1000
1100
1500
1500
1750
CONTROL
REGENERATION
DIRECTION
START
3,6
2,2
5,4
5,4
3,5
(Litres) CAPACITY
20
20
22
30
30
35
RESIN
120
120
132
180
180
210
WEIGHT (Kg)
35
35
37
42
42
47
Compact domestic softener *Resin tank integrated in the softeners cabinet, brine tank with removable lid. *SE models come with white softener hood. *LOG models allow automatic regeneration interval calculation according to water hadness and resin volume. *The Keramis valve models incorporate a hydraulic distribution system whith ceramic core.
85C
FLECK AUTOTROL KERAMIS Power supply 100-240Vac / 50-60 Hz (Keramis) 230Vac / 50-60Hz (110V/60Hz Opt.) Connections 1 3/4 (85C y 120C Keramis) Operating pressure 1,5 - 6 bar Water temperature 5-45C Dimensions (A x B x C) 680 x 378 x 515 By- pass Optional
K65B-1 DF A-714203
SE 85V
5600 DF* A-714010 5000 SE DF A-400001 LOGIX 255/760 V A-714013
100V UF
5000 SE UF A-400006
SE 120V
5600 DF* A-400158 5000 SE DF A-400003 LOGIX 255/760 V A-400157 K65B-1 VOL DF A-400154
120C
150V UF
5000 SE UF A-400004
K65B-1 DF A-400156
K68A-3 UF A-400153
VALVE
CONTROL
450
450
500
600
600
750
CONTROL
REGENERATION
DIRECTION
START
1,5
2,1
2,1
1,5
(Litres) CAPACITY
8,5
8,5
10
12
12
15
RESIN
51
51
60
72
72
90
WEIGHT (Kg)
18
18
19,5
21,5
21,5
24,5
Compact domestic softener *Resin tank integrated in the softeners cabinet, independent brine tank with rotating lid. *Keramis valve with hydraulic distribution system and ceramic core. *Electronic multi-colour display. *Auxiliary voltage free contact.
Power supply 280-110V / 50-60Hz Connections 1 G Operating pressure 1,5 - 6 bar Water temperature 5-45C Dimensions (A x B x C) 635 x 310 x 625 By- pass Included
85 V
A-406400 MODEL K63B-3K
100 V
A-406401 K63B-3K
120 V
A-406403 K63B-3K
VALVE
CONTROL
425
500
600
750
1500
2250
CONTROL
REGENERATION
DIRECTION
START
1,8
2,1
1,5
0,9
1,35
(Litres) CAPACITY
8,5
10
12
15
10
15
RESIN
51
60
72
90
66
99
WEIGHT (Kg)
18
19,5
21,5
24,5
19,5
24,5
Compact domestic softener *Resin tank integrated in the softeners cabinet, brine tank with removable lid. *SE models incorporate electronic programmer.
Power supply 250V/150Hz (110V/60Hz Opt.) Connections E/S 1 G Operating pressure 1,8 - 8 bar Water temperature 5-40C Dimensions (A x B x C) 1150 x 300 x 430 660 x 300 x 430 By- pass Optional
85 VOL 100 VOL UF 200 VOL 220 VOL UF 300 VOL 350 VOL UF
A-409101 MODEL FLECK 5000 SE A-409132 FLECK 5000 SE A-409201 FLECK 5000 SE A-409232 FLECK 5000 SE A-409301 FLECK 5000 SE A-409332 FLECK 5000 SE
VALVE
CONTROL
425
500
1000
1100
1500
1750
CONTROL
REGENERATION
DIRECTION
START
3,6
2,2
5,4
3,5
(Litres) CAPACITY
8,5
10
20
22
30
35
RESIN
51
60
120
132
180
210
WEIGHT (Kg)
20
21
30
32
40
45
Compact domestic softener *Resin tank integrated in the softeners cabinet, brine tank with swinging lid. *Integrated mixing valve. *LCD display.
110 VOL
A-714015 MODEL Power supply 230V/50Hz (110V/60Hz Opt.) Connections E/S 3/4 G Operating pressure 1,8 - 8 bar Water temperature 5-30C Dimensions (A x B x C) 590 x 370 x 180 490 x 370 x 180 By- pass Optional 110 VOL
PLUS VOL
A-714195 110 PLUS VOL
VALVE
CONTROL
750
1100
CONTROL
REGENERATION
DIRECTION
START
0,6
(Litres) CAPACITY
RESIN
26
40
WEIGHT (Kg)
9,5
12
Compact softener for commercial use *Resin tank integrated in the softeners cabinet, independent pull-out brine tank. *Hydraulic distribution Keramis valve with ceramic core. *Multi-colour display. *Auxiliary voltage free contact.
Power supply 230-110V/50-60Hz Connections 3/4 G Operating pressure 1,5 - 6 bar Water temperature 5-45C Dimensions (A x B x C) 585 x 282 x 510 By- pass Included in VOL models Optional in CR models
85 C
A-406452 MODEL K65B-1
85 V
A-406451 K65B-3
85 SA
A-406453 K65C
VALVE
CONTROL
425
425
425
500
500
CONTROL
REGENERATION
DIRECTION
START
1,5
1,5
(Litres) CAPACITY
8,5
8,5
8,5
10
10
RESIN
51
51
51
60
60
WEIGHT (Kg)
16
16
16
19,5
19,5
MODEL
Keramis K63B-3
Keramis K68A-3
Keramis K74A
Power supply 100-240Vac / 50-60Hz Connections 1 Operating pressure 1,5-6 bar Water temperature 5-45C Dimensions (A x B x C) From 640 x 205 x 440 Up to 1870 x 405 x 1670 Tank From 540 x 410 Up to 1140 x 750
VALVE
CONTROL
0,5 - 6
0,5 - 6
CONTROL
DIRECTION
REGENERATION
START
0,9 - 12,5
13,5 - 36
50 - 300
300 - 750
8,5 - 125
75 - 200
RESIN
51 - 600
51 - 750
450 - 1200
WEIGHT (Kg)
15 - 110
15 - 140
170 - 460
MODEL Power supply 230Vac / 50Hz Connections 1 up to 3 Operating pressure 2-8 bar Water temperature 5-45C Dimensions (A x B x C) From 640 x 205 x 440 Up to 2530 x 1100 x 2130 Tank From 540 x 410 Up to 1650 x 1100
VALVE
CONTROL
0,42 - 50
0,9 - 30
CONTROL
DIRECTION
REGENERATION
START
1,5 - 180 (Kg/REG) SALT CONSUMPTION 50 - 1100 (Litres) BRINE TANK VOLUME
1,5 - 180
1,8 - 60
50 - 1100
80 - 500
8,5 - 1000
18 - 600
RESIN
51 - 6000
51 - 6000
108 - 3600
WEIGHT (Kg)
15 - 1200
15 - 1200
25 - 680
MODEL
Power supply 100-240Vac / 50-60Hz Connections 1 Operating pressure 1,5-6 bar Water temperature 5-45C Dimensions (A x B x C) From 640 x 205 x 440 Up to 1870 x 405 x 1670 Tank From 540 x 410 Up to 1140 x 750
VALVE
CONTROL
CONTROL
DIRECTION
REGENERATION
START
RESIN
120 - 600
WEIGHT (Kg)
60 -220
VALVE
1 - 60
CONTROL
DIRECTION
REGENERATION
START
3,6 - 216
80 - 1500
20 - 1200
RESIN
120 - 1800
120 - 7200
WEIGHT (Kg)
60 - 660
60 - 1900