Sei sulla pagina 1di 2

04

CABLE TERMINATION & ACCESSORIES


LL2I L5,LeI LLL.
4-34
FOSC-100B2/H
INTEGRATED FIBRE OPTIC SPLICE CLOSURE

This is a compact closure suitable for a variety of cable
constructions and is designed for aerial, buried and manhole use.
The high performance moulded parts are easy to install and have
a high split resistance.
FOSC-400
FIBRE OPTIC SPLICE CLOSURE

FOSC 400 is a fibre optic slice closure with excellence in sealing, fibre management, ease of
use and design flexibility.
1) Capacity is 16 with standard 65 mm fusion splice protectors, 32 with Raychem 45 mm SMOUV fusion splice
protectors.
2) Varies with splice type. Cpacity is 16 for most commonly used mechanical splices.
PedCap GTM
COLDAPPLIED PEDESTAL SPLICE CLOSURE

PedCap GTM is a cold applied, rugged, rectangular cap made of high-performance material
that offers mechanical protection and fits neatly into all pedestals.

It consists of a tough aluminium-laminate bag with preapplied gel sealing tape which fits inside
the plastic cap and prevents moisture ingress into the splice
INTEGRATED FIBRE OPTIC SPLICE CLOSURE
CABLE TERMINATION & ACCESSORIES
LL2I L5,LeI LLL.
04
4-35
TDUX
INFLATABLE SEALING SYSTEM

TDUX is unique inflatable wraparound duct seal system for
underground application.
It is meant to permanently seal telephone cable ducts and
preventing leakage of water from the duct into exchange
vaults or manholes.
Installation tools

TDUX duct seals can be installed
with a wide variety of inflation tools,
having the capability to inflate TDUX
to 3.0 0.2 bar of pressure.
Following tools are available from
Raychem.
TDUX-IT-16

Inflation tools using CO@ gas cylin-
ders. The tools is designed with an
ON/OFF switch and has an auto-
matic pressure monitoring system to
guarantee the required inflation
pressure of 3.0 0.2 bar
TDUX-IG-SR-AS

Inflation gun to be connected to a
pressurised air bottle, pump or
compressor, having an outlet pres-
sure of 4 to 10 bar to feed the inflat-
ing gun. The inflating gun is de-
signed with a safety relieve valve
and audio signal device to facilitate
the installation.
* To seal duct occupied with more
than 2 cables, TDUX-CL clips are
available as separate items. Con-
tact Raychem for more specific
information on TDUX-CL clips.
SMOUV
FIBRE OPTIC FUSION SPLICE PROTECTION
AND SUPPORT SLEEVE

The SMOUV solution is used to reinstate the protective buff-
ering around the bare fibre and adequately support the fin-
ished splice when Optical Fibres are spliced by fusion tech-
nique.

Potrebbero piacerti anche