Sei sulla pagina 1di 892

TM 55-1925-273-10-4

TECHNICAL MANUAL OPERATOR'S MANUAL FOR

INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG)

MG ANTHONY WAYNE

US ARMY LT - 803

18 17 16 15 14 13

15 14 13 12 11 10 9

DISTRIBUTION STATEMENT A - Approved for public release; distribution is unlimited.

HEADQUARTERS, DEPARTMENT OF THE ARMY 11 FEBRUARY 2013


03/15/2011 Rel(1.8) root(frntcover) wpno(F00001)

TM 55-1925-273-10-4

WARNING SUMMARY
This warning summary contains general safety warnings and hazardous materials warnings that must be understood and applied during operation and maintenance of this vessel and its equipment. Failure to observe these precautions could result in serious injury or death to personnel. Also included are explanations of safety and of hazardous materials used within the technical manual. FIRST AID Although the 128 ft Large Tug is normally assigned a medic, first aid is still an important skill for all crewmembers. The ability to promptly administer first aid to another crewmember could mean the difference between life and death for that crewmember. First aid procedures for soldiers are contained in FM 4-25.11. EXPLANATION OF SAFETY WARNING ICONS

EAR PROTECTION - Headphones over ears show that noise level will harm ears.

ELECTRICAL - Electrical wire to arm with electricity symbol running through hand shows that shock hazard is present.

ELECTRICAL - Electrical wire to hand with electricity symbol running through hand shows that shock hazard is present.

EXPLOSION - Rapidly expanding symbol shows that the material may explode if subjected to high temperatures, sources of ignition, or high pressure.

EYE PROTECTION - Person with goggles shows that the material will injure the eyes.

FIRE - Flame shows that a material may ignite and cause burns.

FALLING PARTS - Arrow bouncing off human shoulder and head shows that falling parts present a danger to life or limb.

03/15/2011 Rel(1.8) root(warnsum) wpno(F00002)

TM 55-1925-273-10-4

WARNING SUMMARY - Continued


EXPLANATION OF SAFETY WARNING ICONS - Continued

FLYING PARTICLES - Arrows bouncing off face show that particles flying through the air will harm face.

FLYING PARTICLES - Arrows bouncing off face shield show that particles flying through the air will harm face.

HEAVY OBJECT - Human figure stooping over heavy object shows physical injury potential from improper lifting technique.

HEAVY PARTS - Hand with heavy object on top shows that heavy parts can crush and harm.

HEAVY PARTS - Foot with heavy object on top shows that heavy parts can crush and harm.

HEAVY PARTS - Heavy object on human figure shows that heavy parts present a danger to life or limb.

HEAVY PARTS - Heavy object pinning human figure against wall shows that heavy, moving parts present a danger to life or limb.

HELMET PROTECTION - Arrow bouncing off head with helmet shows that falling parts present a danger.

HOT AREA - Hand over object radiating heat shows that part is hot and can burn.

03/15/2011 Rel(1.8) root(warnsum) wpno(F00002)

TM 55-1925-273-10-4

WARNING SUMMARY - Continued


EXPLANATION OF SAFETY WARNING ICONS - Continued

MOVING PARTS - Human figure with arm caught between gears shows that the moving parts of the equipment present a danger to life or limb.

MOVING PARTS - Hand with fingers caught between gears shows that the moving parts of the equipment present a danger to life or limb.

MOVING PARTS - Hand with fingers caught between rollers shows that the moving parts of the equipment present a danger to life or limb.

SHARP OBJECT - Pointed object in hand shows that a sharp object presents a danger to limb.

SHARP OBJECT - Pointed object in hand shows that a sharp object presents a danger to limb.

SHARP OBJECT - Pointed object in foot shows that a sharp object presents a danger to limb.

SLICK FLOOR - Wavy line on floor with legs prone shows that slick floor presents a danger for falling.

03/15/2011 Rel(1.8) root(warnsum) wpno(F00002)

TM 55-1925-273-10-4

WARNING SUMMARY - Continued


GENERAL SAFETY WARNINGS DESCRIPTION

WARNING

GALLEY NOISE HAZARD All crewmembers working in the galley must wear Army Hearing Protection Devices (HPDs) and ensure that the galley doors remain closed. Failure to comply could result in injury.

WARNING

MACHINE GUN NOISE HAZARD During the M2 caliber 0.50 weapons firing, all personnel standing outside on deck must wear Army Hearing Protection Devices (HPDs). Failure to comply with this warning could result in serious injury.

WARNING
SAFETY HARNESS Ensure that a safety harness is worn when inspecting antennas. Failure to comply could result in injury or death. EXPLANATION OF HAZARDOUS MATERIAL ICONS CHEMICAL - Drops of liquid on hand shows that the material will cause burns or irritation to human skin or tissue.

CRYOGENIC - Hand in block of ice shows that material is extremely cold and can injure human skin or tissue.

RADIATION - Three circular wedges show that the material emits radioactive energy and can injure human tissue.

VAPOR - Human figure in a cloud shows that material vapors present a danger to life or health.

03/15/2011 Rel(1.8) root(warnsum) wpno(F00002)

TM 55-1925-273-10-4

WARNING SUMMARY - Continued


EXPLANATION OF HAZARDOUS MATERIAL ICONS - Continued

HAZARDOUS MATERIALS DESCRIPTIONS

WARNING

CHLORINE AND BROMINE STORAGE AND HANDLING Chlorine and Water Demineralizer Cartridge (NSN-4610-01-002-9970) which contains the chemical Bromine may not be stored together. Both chemicals, Chlorine and Bromine, must follow the Federal HAZCOM standard (29 CFR 1910.1200) along with the Material Safety Data Sheet (MSDS) for each chemical. Failure to comply could result in injury or death.

WARNING

GAYLORD VENTILATION AND FIRE SUPPRESSION SYSTEM In the event that the Gaylord Ventilation and Fire Suppression system is activated and exposure to the fire suppressant occurs, all personnel exposed should immediately wash out the eyes and shower to remove residual material. Failure to comply could result in injury or death.

WARNING

RADIATION, RADIO ANTENNAS Inspecting antennas with the INSA, radars, transceivers and receiver-transmitters turned on presents a radiation hazard. Ensure all transceivers and receiver-transmitters are turned off prior to inspecting antennas. Ensure that the appropriate circuit breaker has been secured, locked out, and tagged out (see WP 0008) in accordance with FM 4-01-502. Failure to comply could result in injury or death.

03/15/2011 Rel(1.8) root(warnsum) wpno(F00002)

TM 55-1925-273-10-4

WARNING SUMMARY - Continued


HAZARDOUS MATERIALS DESCRIPTIONS - Continued

WARNING

SEWAGE Toxic and flammable vapors are generated in the sewage system. Provide ventilation from outside source. Avoid open flames and prolonged breathing of fumes. Failure to comply could result in injury or death.

03/15/2011 Rel(1.8) root(warnsum) wpno(F00002)

TM 55-1925-273-10-4

LIST OF EFFECTIVE PAGES/WORK PACKAGES


NOTE: Zero in the "Change No." column indicates an original page or work package. Date of issue for the original manual is: Original 11 February 2013

TOTAL NUMBER OF VOLUMES IS 4, TOTAL NUMBER OF PAGES FOR FRONT AND REAR MATTER IS 56 AND TOTAL NUMBER OF WORK PACKAGES IS 33, CONSISTING OF THE FOLLOWING: Page/WP No. VOLUME 4 Front Cover (2 pages) Warning Summary (6 pages) i-xxii (22 pages) Chapter 5 Title Page WP 0133 (4 pages) Chapter 6 Title Page WP 0134 (2 pages) WP 0135 (14 pages) Chapter 7 Title Page WP 0136 (4 pages) WP 0137 (70 pages) WP 0138 (68 pages) WP 0139 (14 pages) WP 0140 (22 pages) WP 0141 (46 pages) WP 0142 (6 pages) WP 0143 (6 pages) WP 0144 (4 pages) WP 0145 (6 pages) WP 0146 (8 pages) WP 0147 (18 pages) WP 0148 (10 pages) Change No. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Page/WP No. WP 0149 (18 pages) WP 0150 (46 pages) WP 0151 (4 pages) WP 0152 (12 pages) WP 0153 (14 pages) WP 0154 (2 pages) WP 0155 (6 pages) WP 0156 (18 pages) WP 0157 (10 pages) WP 0158 (6 pages) WP 0159 (28 pages) WP 0160 (18 pages) Chapter 8 Title Page WP 0161 (2 pages) Chapter 9 Title Page WP 0162 (6 pages) WP 0163 (312 pages) WP 0164 (4 pages) WP 0165 (18 pages) Glossary-1 - Glossary-4 Index-1 - Index-6 Back Cover Change No. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

A/B blank

03/15/2011 Rel(1.8) root(loepwp) wpno(F40003)

TM 55-1925-273-10-4 HEADQUARTERS, DEPARTMENT OF THE ARMY WASHINGTON, D.C., 11 FEBRUARY 2013

TECHNICAL MANUAL OPERATOR'S MANUAL FOR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG)
REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS You can help improve this publication. If you find any errors, or if you would like to recommend any improvements to the procedures in this publication, please let us know. The preferred method is to submit your DA Form 2028 (Recommended Changes to Publications and Blank Forms) through the Internet on the TACOM Unique Logistics Support Applications (TULSA) Web site. The Internet address is https://tulsa.tacom.army.mil. Access to all applications requires CAC authentication, and you must complete the Access Request form the first time you use it. The DA Form 2028 is located under the TULSA Applications on the left-hand navigation bar. Fill out the form and click on SUBMIT. Using this form on the TULSA Web site will enable us to respond more quickly to your comments and to better manage the DA Form 2028 program. You may also mail, e-mail, or fax your comments or DA Form 2028 directly to the U.S. Army TACOM Life Cycle Management Command. The postal mail address is U.S. Army TACOM Life Cycle Management Command, ATTN: AMSTA-LCL-MPP/ TECH PUBS, MS 727, 6501 E. 11 Mile Road, Warren, MI 48397-5000. The e-mail address is tacomlcmc.daform2028@us.army.mil. The fax number is DSN 786-1856 or Commercial (586) 282-1856. A reply will be furnished to you.

DISTRIBUTION STATEMENT A - Approved for public release; distribution is unlimited.

i/ii blank
03/15/2011 Rel(1.8) root(titleblk) wpno(F00004)

03/15/2011 Rel(1.8) root(titleblk) wpno(F00004)

TM 55-1925-273-10-4

TABLE OF CONTENTS
Page No. WP Sequence No. Volume 4 Chapter 5 - OPERATOR TROUBLESHOOTING MASTER INDEX FOR LT-800 SERIES OPERATOR TROUBLESHOOTING INDEX................................................................................................ WP 0133 Chapter 6 - OPERATOR TROUBLESHOOTING PROCEDURES FOR LT-800 SERIES OPERATIONAL CHECKOUT...................................................................................................................... WP 0134 TROUBLESHOOTING PROCEDURES...................................................................................................... WP 0135 Chapter 7 - OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) MAINTENANCE INSTRUCTIONS FOR LT-800 SERIES PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INTRODUCTION............................. WP 0136 PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION GENERAL........................................................................................................................... WP 0137 Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Figure 16. Preventative Maintenance Checks and Services (PMCS) Including Lubrication................. 0137-2 Life Lines and Stanchions.................................................................................................... 0137-2 Life Jackets.......................................................................................................................... 0137-3 Life Rings............................................................................................................................. 0137-4 Fire Detection, Suppression, and Alarm Systems................................................................ 0137-5 Fire Detection, Suppression, and Alarm Systems................................................................ 0137-5 Fire Stations......................................................................................................................... 0137-6 Portable Fire Extinguishers.................................................................................................. 0137-7 Intercom System.................................................................................................................. 0137-8 HVAC Equipment................................................................................................................. 0137-9 Air Conditioner Units.......................................................................................................... 0137-10 Unit Heaters....................................................................................................................... 0137-11 Piping Systems................................................................................................................... 0137-12 Pressure Reducing Valves................................................................................................. 0137-12 Sanitary Spaces................................................................................................................. 0137-13 Life Lines and Stanchions.................................................................................................. 0137-14 Lifesaving Equipment......................................................................................................... 0137-15

iii

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 17. Figure 18. Figure 19. Figure 20. Figure 21. Figure 22. Figure 23. Figure 24. Figure 25. Figure 26. Figure 27. Figure 28. Figure 29. Figure 30. Figure 31. Figure 32. Figure 33. Figure 34. Figure 35. Figure 36. Figure 37. Figure 38. Figure 39. Figure 40. Figure 41. Figure 42. Figure 43. Life Rings........................................................................................................................... 0137-16 Fire Detection, Suppression, and Alarm Systems.............................................................. 0137-17 Fire Detection, Suppression, and Alarm Systems.............................................................. 0137-17 Fire Stations....................................................................................................................... 0137-18 Portable Fire Extinguishers................................................................................................ 0137-19 Intercom System................................................................................................................ 0137-21 Sound Powered Telephones.............................................................................................. 0137-23 Exterior Handsets............................................................................................................... 0137-25 Power Distribution System (Including 24 V DC Panels)..................................................... 0137-27 HVAC Equipment............................................................................................................... 0137-28 Air Conditioner Units.......................................................................................................... 0137-29 Unit Heaters....................................................................................................................... 0137-30 Piping Systems................................................................................................................... 0137-31 Sanitary Spaces................................................................................................................. 0137-31 Safety Chains..................................................................................................................... 0137-32 Lifesaving Equipment......................................................................................................... 0137-33 Life Rings........................................................................................................................... 0137-34 Sanitary Spaces................................................................................................................. 0137-35 Fire Detection, Suppression, and Alarm Systems.............................................................. 0137-36 Fire Detection, Suppression, and Alarm Systems.............................................................. 0137-36 Fire Stations....................................................................................................................... 0137-37 Portable Fire Extinguishers................................................................................................ 0137-38 Safety Chains..................................................................................................................... 0137-39 Life Rings........................................................................................................................... 0137-40 Fire Alarm Pull System....................................................................................................... 0137-41 Portable Fire Extinguishers................................................................................................ 0137-42 Watertight Doors................................................................................................................ 0137-43

iv

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 44. Figure 45. Figure 46. Figure 47. Figure 48. Figure 49. Figure 50. Figure 51. Figure 52. Figure 53. Figure 54. Figure 55. Figure 56. Figure 57. Figure 58. Figure 59. Figure 60. Figure 61. Figure 62. Figure 63. Figure 64. Figure 65. Figure 66. Figure 67. Figure 68. Table 2. Manholes............................................................................................................................ 0137-44 Hatches.............................................................................................................................. 0137-45 Scuttles............................................................................................................................... 0137-46 Watertight Windows (Portholes)......................................................................................... 0137-47 Sound Powered Telephones.............................................................................................. 0137-48 Exterior Headsets............................................................................................................... 0137-49 Life Jackets........................................................................................................................ 0137-50 Fire Detection, Suppression and Alarm Systems............................................................... 0137-51 Fire Stations....................................................................................................................... 0137-52 Nozzle................................................................................................................................ 0137-53 Portable Fire Extinguishers................................................................................................ 0137-53 Intercom System................................................................................................................ 0137-54 Pushbuttons....................................................................................................................... 0137-55 Sound Powered Telephones.............................................................................................. 0137-57 Power Distribution System (Including 24 V DC Panels)..................................................... 0137-59 HVAC Equipment............................................................................................................... 0137-59 Air Conditioner Units.......................................................................................................... 0137-60 Unit Heaters....................................................................................................................... 0137-61 Drinking Fountains............................................................................................................. 0137-62 Watertight Doors................................................................................................................ 0137-63 Manholes............................................................................................................................ 0137-64 Hatches.............................................................................................................................. 0137-65 Scuttles............................................................................................................................... 0137-66 Watertight Windows (Portholes)......................................................................................... 0137-67 Fire Stations....................................................................................................................... 0137-68 Lubricant (Grease) Types................................................................................................... 0137-69

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION ENGINE ROOM.................................................................................................................. WP 0138

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Figure 16. Figure 17. Figure 18. Figure 19. Figure 20. Figure 21. Figure 22. Figure 23. Figure 24. Figure 25. Figure 26. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0138-2 Lube Oil Purifier.................................................................................................................... 0138-2 Tank Level Indicator (TLI) Panel and Receivers.................................................................. 0138-3 Lube Oil Manifold and Piping............................................................................................... 0138-4 Fuel Filter/Water Separators................................................................................................ 0138-5 Air Start Oiler (SSDG 2 Only)............................................................................................... 0138-6 Sewage Discharge Pumps................................................................................................... 0138-7 Shaft Brake........................................................................................................................... 0138-8 Lube Oil Hand Pump............................................................................................................ 0138-9 Main Propulsion Engines.................................................................................................... 0138-10 Main Engine Control Panel (Starboard or Port).................................................................. 0138-11 Governor............................................................................................................................ 0138-12 Main Engine Coolant Expansion Tank............................................................................... 0138-12 Main Engine Air Filter......................................................................................................... 0138-13 Prelube Pumps................................................................................................................... 0138-13 Fuel Oil Transfer Pumps.................................................................................................... 0138-14 Fuel Filter/Water Separator................................................................................................ 0138-15 Sump.................................................................................................................................. 0138-16 Fuel Oil System.................................................................................................................. 0138-17 Oily Bilge System............................................................................................................... 0138-18 Battery Chargers................................................................................................................ 0138-19 Battery Box. ....................................................................................................................... 0138-20 Batteries............................................................................................................................. 0138-21 Lube Oil Purifier.................................................................................................................. 0138-22 Tank Level Indicator (TLI) Panel and Receivers................................................................ 0138-23 Lube Oil Manifold and Piping,............................................................................................ 0138-24 Ships Service Diesel Generators....................................................................................... 0138-25

vi

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 27. Figure 28. Figure 29. Figure 30. Figure 31. Figure 32. Figure 33. Figure 34. Figure 35. Figure 36. Figure 37. Figure 38. Figure 39. Figure 40. Figure 41. Figure 42. Figure 43. Figure 44. Figure 45. Figure 46. Figure 47. Figure 48. Figure 49. Figure 50. Figure 51. Figure 52. Figure 53. Main Switchboard............................................................................................................... 0138-26 Sewage Discharge Pumps................................................................................................. 0138-27 Reduction Gears................................................................................................................ 0138-28 Reduction Gear Gages....................................................................................................... 0138-29 Lube Oil Hand Pump.......................................................................................................... 0138-30 Governor............................................................................................................................ 0138-31 Expansion Tank.................................................................................................................. 0138-32 Soak Back Pump................................................................................................................ 0138-32 Main Engine Control Panel (Starboard or Port).................................................................. 0138-33 Soak Back Pump................................................................................................................ 0138-34 Prelube Pump..................................................................................................................... 0138-35 Reduction Gear Cooling Pumps......................................................................................... 0138-36 Fuel Oil System.................................................................................................................. 0138-37 Oil Bilge System................................................................................................................. 0138-38 Battery Chargers................................................................................................................ 0138-39 Lube Oil Transfer Pump..................................................................................................... 0138-40 Ship's Service Diesel Generators....................................................................................... 0138-41 Sewage Discharge Pumps................................................................................................. 0138-42 Soak Back Pump................................................................................................................ 0138-43 Prelube Pump..................................................................................................................... 0138-44 Reduction Gear Cooling Pumps......................................................................................... 0138-45 Fuel Oil Transfers Pumps................................................................................................... 0138-46 Battery Chargers................................................................................................................ 0138-47 Batteries............................................................................................................................. 0138-49 Lube Oil Purifier.................................................................................................................. 0138-50 Lube Oil Transfer Pump..................................................................................................... 0138-51 Ships Service Diesel Generators....................................................................................... 0138-52

vii

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 54. Figure 55. Figure 56. Figure 57. Figure 58. Figure 59. Figure 60. Figure 61. Figure 62. Figure 63. Figure 64. Figure 65. Figure 66. Figure 67. Figure 68. Table 2. Ships Service Diesel Generators....................................................................................... 0138-53 Soak Back Pump................................................................................................................ 0138-55 Reduction Gear Cooling Pumps......................................................................................... 0138-56 Fuel Oil Transfer Pumps.................................................................................................... 0138-56 Fuel Oil System.................................................................................................................. 0138-57 Oily Bilge System............................................................................................................... 0138-58 Battery Chargers................................................................................................................ 0138-59 Battery Box......................................................................................................................... 0138-60 Batteries............................................................................................................................. 0138-61 Lube Oil Transfer Pump..................................................................................................... 0138-62 Sewage Discharge Pumps................................................................................................. 0138-63 Soak Back Pump................................................................................................................ 0138-64 Prelube Pump..................................................................................................................... 0138-65 Oily Bilge System............................................................................................................... 0138-65 Batteries............................................................................................................................. 0138-67 Lubricant and Coolant Specifications................................................................................. 0138-68

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION ENCLOSED OPERATING STATION (EOS)...................................................................... WP 0139 Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0139-2 EOS Console........................................................................................................................ 0139-2 Main Switchboard................................................................................................................. 0139-3 Tank Level Indicator (TLI) Transmitter and Receiver Panels............................................... 0139-4 EOS Console........................................................................................................................ 0139-5 Main Switchboard................................................................................................................. 0139-6 Tank level Indicator (TLI) Transmitter and Receiver Panels................................................ 0139-7 Marine Air Conditioner Unit.................................................................................................. 0139-8 EOS Console........................................................................................................................ 0139-9 EOS Console...................................................................................................................... 0139-10

viii

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 10. Figure 11. Figure 12. Main Switchboard............................................................................................................... 0139-11 Tank Level Indicator (TLI) Transmitter and Receiver Panels............................................. 0139-12 Marine Air Conditioner Unit................................................................................................ 0139-13

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION AMS 1................................................................................................................................. WP 0140 Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Figure 16. Figure 17. Table 2. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0140-2 Bow Thruster Engine and Marine Gear................................................................................ 0140-2 Bow Thruster Engine and Marine Gear................................................................................ 0140-3 Pump Drive Engine.............................................................................................................. 0140-5 Sliding Hydraulic Watertight Door........................................................................................ 0140-6 Hot Water Recirculating....................................................................................................... 0140-7 Bow Thruster Engine and Marine Gear................................................................................ 0140-8 Bow Thruster Engine and Marine Gear................................................................................ 0140-9 Pump Drive Engine............................................................................................................ 0140-10 Bow Thruster Engine and Marine Gear.............................................................................. 0140-11 Pump Drive Engine............................................................................................................ 0140-12 Hot Water Recirculating Pump........................................................................................... 0140-13 Bow Thruster Engine and Marine Gear.............................................................................. 0140-14 Bow Thruster Engine and Marine Gear.............................................................................. 0140-15 Pump Drive Engine............................................................................................................ 0140-17 Sliding Hydraulic Watertight Door...................................................................................... 0140-18 Bow Thruster and Marine Gear.......................................................................................... 0140-19 Pump Drive Engine............................................................................................................ 0140-20 Lubricant and Coolant Specifications................................................................................. 0140-21

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION AMS 2................................................................................................................................. WP 0141 Table 1. Figure 1. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0141-1 Potable Water Hydropneumatic Tank.................................................................................. 0141-1

ix

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Figure 16. Figure 17. Figure 18. Figure 19. Figure 20. Figure 21. Figure 22. Figure 23. Figure 24. Figure 25. Figure 26. Figure 27. Figure 28. Steering Gear Emergency Hand Pump................................................................................ 0141-2 Steering Hydraulic Power Pack............................................................................................ 0141-3 Tank Level Indicator Receivers............................................................................................ 0141-4 Potable Water Pumps.......................................................................................................... 0141-5 Air Conditioning Condensing Units....................................................................................... 0141-6 Fire and General Service Pumps......................................................................................... 0141-7 Bilge/Ballast Pump............................................................................................................... 0141-8 Ballast Manifold.................................................................................................................... 0141-8 Sliding Hydraulic Watertight Door........................................................................................ 0141-9 Workshop Tools and Associated Equipment...................................................................... 0141-11 Workshop Tools and Associated Equipment...................................................................... 0141-13 Workshop Tools and Associated Equipment...................................................................... 0141-14 Steering Hydraulic Power Pack Motor Controllers............................................................. 0141-15 Tank Level Indicator Receivers.......................................................................................... 0141-16 Potable Water Pumps........................................................................................................ 0141-17 Air Conditioning Condensing Units..................................................................................... 0141-18 Refrigeration Condensing Units......................................................................................... 0141-19 Bilge Manifold..................................................................................................................... 0141-20 Fire and General Service Pumps....................................................................................... 0141-21 Bilge/Ballast Pump............................................................................................................. 0141-22 Tank Level Indicator Receivers.......................................................................................... 0141-22 Ballast Manifold.................................................................................................................. 0141-23 Bromide Feeder.................................................................................................................. 0141-24 Steering Hydraulic Power Pack.......................................................................................... 0141-25 Refrigeration Condensing Units......................................................................................... 0141-27 Fire and General Service Pumps....................................................................................... 0141-28 Bilge/Ballast Pump............................................................................................................. 0141-29

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 29. Figure 30. Figure 31. Figure 32. Figure 33. Figure 34. Figure 35. Figure 36. Figure 37. Figure 38. Figure 39. Figure 40. Figure 41. Figure 42. Figure 43. Table 2. Rudder Angle Indicator....................................................................................................... 0141-30 Tank Level Indicator Receivers.......................................................................................... 0141-31 Potable Water Pumps........................................................................................................ 0141-32 Potable Water Hydropneumatic Tank................................................................................ 0141-33 Steering Hydraulic Power Pack Motor Controllers............................................................. 0141-34 Bilge Manifold..................................................................................................................... 0141-35 Fire and General Service Pumps....................................................................................... 0141-36 Bilge/Ballast Pump............................................................................................................. 0141-37 Tank Level Indicator Receivers.......................................................................................... 0141-37 Ballast Manifold.................................................................................................................. 0141-38 Sliding Hydraulic Watertight Door...................................................................................... 0141-39 Sliding Hydraulic Watertight Door...................................................................................... 0141-40 Workshop Tools and Associated Equipment...................................................................... 0141-42 Workshop Tools and Associated Equipment...................................................................... 0141-43 Workshop Tools and Associated Equipment...................................................................... 0141-44 Lubricant Specifications..................................................................................................... 0141-45

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION SHAFT ALLEYS................................................................................................................. WP 0142 Table 1. Figure 1. Figure 2. Figure 3. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0142-2 Starboard Propeller Shaft Seals........................................................................................... 0142-2 Starboard Propeller Shaft Seals........................................................................................... 0142-3 Starboard Propeller Shaft Seals........................................................................................... 0142-5

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION BOW THRUSTER COMPARTMENT................................................................................. WP 0143 Table 1. Figure 1. Figure 2. Figure 3. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0143-2 Bow Thruster........................................................................................................................ 0143-2 Eductor Pressure Gages...................................................................................................... 0143-3 Bow Thruster........................................................................................................................ 0143-4

xi

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Table 2. Lubricant Specifications....................................................................................................... 0143-5

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION TOWING GEAR LOCKER.................................................................................................. WP 0144 Table 1. Figure 1. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0144-2 Towing Gear Locker............................................................................................................. 0144-3

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION STEERING GEAR COMPARTMENT................................................................................. WP 0145 Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0145-2 Steering Gear Compartment................................................................................................ 0145-2 Steering Gear Compartment................................................................................................ 0145-3 Steering Gear Compartment................................................................................................ 0145-4 Steering Gear Compartment................................................................................................ 0145-5

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION FANTAIL............................................................................................................................. WP 0146 Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0146-2 External Structure................................................................................................................. 0146-2 Shore Power Cable.............................................................................................................. 0146-3 Shore Power Connector....................................................................................................... 0146-4 Hatch and Vent/Cover Gaskets............................................................................................ 0146-5 H-bitts................................................................................................................................... 0146-6 Shore Power Cable.............................................................................................................. 0146-7

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION FAN ROOM, MAIN DECK.................................................................................................. WP 0147 Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0147-2 Exhaust Fans / Preheater..................................................................................................... 0147-2 Room Door Alarm................................................................................................................. 0147-3 Fan Coil Unit......................................................................................................................... 0147-4 Refrigeration Piping.............................................................................................................. 0147-5 Steering Gear Head Tank.................................................................................................... 0147-6

xii

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Table 2. Supply and Exhaust Fans.................................................................................................... 0147-7 Fan Coil Unit......................................................................................................................... 0147-8 Refrigeration Piping.............................................................................................................. 0147-9 Steering Gear Head Tank.................................................................................................. 0147-10 Room Door Alarm............................................................................................................... 0147-11 Preheater............................................................................................................................ 0147-12 Fan Coil Unit....................................................................................................................... 0147-13 Refrigeration Piping............................................................................................................ 0147-14 Steering Gear Head Tank.................................................................................................. 0147-15 Supply and Exhaust Fans.................................................................................................. 0147-16 Lubrication Specifications................................................................................................... 0147-17

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION MAIN DECK VESTIBULE................................................................................................... WP 0148 Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Table 2. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0148-2 AMS 2 Watertight Door Remote Hand Pump Station........................................................... 0148-2 Emergency Stop Switches................................................................................................... 0148-3 AMS 2 Watertight Door Remote Hand Pump Station........................................................... 0148-4 Emergency Stop Switches................................................................................................... 0148-5 AMS 2 Watertight Door Remote Hand Pump Station........................................................... 0148-6 Emergency Stop Switches................................................................................................... 0148-7 Towing Machine Control Panel............................................................................................ 0148-8 AMS 2 Watertight Door Remote Hand Pump Station........................................................... 0148-9 Lubrication Specifications. ................................................................................................... 0148-9

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION MESS/RECREATION ROOM............................................................................................. WP 0149 Table 1. Figure 1. Figure 2. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0149-2 Toaster................................................................................................................................. 0149-2 Coffee Percolator................................................................................................................. 0149-3

xiii

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Figure 16. Beverage Dispenser............................................................................................................. 0149-4 Milk Dispenser...................................................................................................................... 0149-5 Mini Refrigerator................................................................................................................... 0149-6 Ice Maker.............................................................................................................................. 0149-7 Milk Dispenser...................................................................................................................... 0149-8 Toaster................................................................................................................................. 0149-9 Microwave Oven................................................................................................................. 0149-10 Microwave Oven................................................................................................................. 0149-11 Beverage Dispenser........................................................................................................... 0149-12 Milk Dispenser.................................................................................................................... 0149-13 Mini-Refrigerator................................................................................................................. 0149-14 Ice Maker............................................................................................................................ 0149-15 Coffee Percolator............................................................................................................... 0149-16 Ice Maker............................................................................................................................ 0149-17

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION GALLEY.............................................................................................................................. WP 0150 Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0150-1 Trash Compactor.................................................................................................................. 0150-1 Marine Freezer and Refrigerator.......................................................................................... 0150-2 Marine Freezer and Refrigerator.......................................................................................... 0150-3 Walk-In Freezer.................................................................................................................... 0150-4 Chill Box............................................................................................................................... 0150-5 Serving Line/Steam Table.................................................................................................... 0150-6 Coffee Percolator................................................................................................................. 0150-7 Coffee Percolator................................................................................................................. 0150-8 Toaster................................................................................................................................. 0150-9 Microwave Oven................................................................................................................... 0150-9 Range/Ventilator Hood....................................................................................................... 0150-10

xiv

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 12. Figure 13. Figure 14. Figure 15. Figure 16. Figure 17. Figure 18. Figure 19. Figure 20. Figure 21. Figure 22. Figure 23. Figure 24. Figure 25. Figure 26. Figure 27. Figure 28. Figure 29. Figure 30. Figure 31. Figure 32. Figure 33. Figure 34. Figure 35. Figure 36. Figure 37. Figure 38. Griddle/Fryer...................................................................................................................... 0150-11 Fryer................................................................................................................................... 0150-12 Mixer................................................................................................................................... 0150-13 Dishwasher......................................................................................................................... 0150-14 Peeler................................................................................................................................. 0150-15 Bakers Scale...................................................................................................................... 0150-15 Meat Slicer......................................................................................................................... 0150-16 Marine Freezer and Refrigerator........................................................................................ 0150-17 Serving Line/Steam Table.................................................................................................. 0150-18 Marine Freezer................................................................................................................... 0150-19 Serving Line/Steam Table.................................................................................................. 0150-20 Toaster............................................................................................................................... 0150-21 Oven................................................................................................................................... 0150-22 Oven................................................................................................................................... 0150-23 Microwave Oven................................................................................................................. 0150-24 Microwave Oven................................................................................................................. 0150-25 Ventilator Hood................................................................................................................... 0150-26 Fryer................................................................................................................................... 0150-27 Mixer................................................................................................................................... 0150-28 Dishwasher......................................................................................................................... 0150-29 Dishwasher......................................................................................................................... 0150-30 Peeler................................................................................................................................. 0150-31 Peeler................................................................................................................................. 0150-32 Meat Slicer......................................................................................................................... 0150-33 Marine Freezer and Refrigerator........................................................................................ 0150-34 Walk-In Freezer.................................................................................................................. 0150-35 Microwave Oven................................................................................................................. 0150-36

xv

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 39. Figure 40. Figure 41. Figure 42. Figure 43. Figure 44. Figure 45. Figure 46. Figure 47. Table 2. Ventilator Hood................................................................................................................... 0150-37 Ventilator Hood................................................................................................................... 0150-38 Dishwasher/Sanitizer.......................................................................................................... 0150-39 Peeler................................................................................................................................. 0150-40 Meat Slicer......................................................................................................................... 0150-41 Marine Freezer and Refrigerator........................................................................................ 0150-42 Marine Freezer and Refrigerator (Door)............................................................................. 0150-43 Coffee Percolator............................................................................................................... 0150-44 Peeler................................................................................................................................. 0150-45 Lubricant Specifications..................................................................................................... 0150-45

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION MAIN DECK STATEROOMS, SANITARY SPACES, AND PASSAGEWAY...................... WP 0151 Table 1. Figure 1. Figure 2. Figure 3. Table 2. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0151-2 Life Jacket Locker................................................................................................................ 0151-2 AMS 1 Watertight Door Remote Hand Pump Station........................................................... 0151-3 Life Jacket Locker................................................................................................................ 0151-4 Lubrication Specifications..................................................................................................... 0151-4

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION BOATSWAIN'S STORE, ARMS LOCKER, AND LAUNDRY ROOM.................................. WP 0152 Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0152-2 Laundry Room Washer........................................................................................................ 0152-2 Laundry Room Dryer............................................................................................................ 0152-3 Boatswain's Store................................................................................................................. 0152-4 Laundry Tub......................................................................................................................... 0152-5 Arms Stowage Room........................................................................................................... 0152-6 Storage Lockers................................................................................................................... 0152-7 Boatswain's Store................................................................................................................. 0152-8 Laundry Room Washer........................................................................................................ 0152-9

xvi

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 9. Figure 10. Laundry Room Dryer.......................................................................................................... 0152-10 Laundry Tub....................................................................................................................... 0152-11

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION 01 LEVEL WEATHER DECKS........................................................................................... WP 0153 Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0153-2 External Structures............................................................................................................... 0153-2 Floodlights............................................................................................................................ 0153-3 Aft Control Station................................................................................................................ 0153-4 AFT Control Station.............................................................................................................. 0153-5 Gun Mounts.......................................................................................................................... 0153-6 Floodlights............................................................................................................................ 0153-6 AFT Control Station.............................................................................................................. 0153-7 External Structures............................................................................................................... 0153-8 Ammo Locker....................................................................................................................... 0153-9 Vent Cover Gaskets............................................................................................................. 0153-9 AFT Control Station............................................................................................................ 0153-10 Double Bitts........................................................................................................................ 0153-11 Floodlights.......................................................................................................................... 0153-12 Gun Mounts........................................................................................................................ 0153-13

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION 01 LEVEL STATEROOMS AND SANITARY SPACES...................................................... WP 0154 Table 1. Figure 1. Table 2. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0154-2 Sanitary Spaces Exhaust Fan.............................................................................................. 0154-2 Lubrication Specifications..................................................................................................... 0154-2

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION 01 LEVEL FAN ROOMS..................................................................................................... WP 0155 Table 1. Figure 1. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0155-2 Fan Coil Unit......................................................................................................................... 0155-2

xvii

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 2. Figure 3. Figure 4. Figure 5. C41 Batteries........................................................................................................................ 0155-3 Preheater.............................................................................................................................. 0155-4 Refrigeration Piping.............................................................................................................. 0155-5 C41 Batteries........................................................................................................................ 0155-6

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION EMERGENCY DIESEL GENERATOR ROOM................................................................... WP 0156 Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Figure 16. Figure 17. Figure 18. Figure 19. Figure 20. Figure 21. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0156-2 Emergency Switchboard...................................................................................................... 0156-2 Battery Charger.................................................................................................................... 0156-2 Battery Box........................................................................................................................... 0156-3 EDG Starting Batteries......................................................................................................... 0156-4 EDG Starting Batteries......................................................................................................... 0156-5 Fuel Oil Day Tank................................................................................................................. 0156-5 Radiator Intake and Exhaust Louvers.................................................................................. 0156-6 Load Center.......................................................................................................................... 0156-7 Battery Charger.................................................................................................................... 0156-7 Engine Accessories and Connections.................................................................................. 0156-8 EDG Engine Control Monitor (ECM).................................................................................... 0156-9 Load Center.......................................................................................................................... 0156-9 EDG Starting Batteries....................................................................................................... 0156-10 Engine Accessories and Connections................................................................................ 0156-11 Emergency Switchboard.................................................................................................... 0156-12 Battery Box......................................................................................................................... 0156-12 EDG Starting Batteries....................................................................................................... 0156-13 Fuel Oil Day Tank............................................................................................................... 0156-14 Load Center........................................................................................................................ 0156-14 Transformers...................................................................................................................... 0156-15 Battery Charger.................................................................................................................. 0156-15

xviii

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 22. Figure 23. Batteries............................................................................................................................. 0156-16 Radiator Intake and Exhaust Louvers................................................................................ 0156-17

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION 02 LEVEL WEATHER DECKS........................................................................................... WP 0157 Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0157-2 Life Raft................................................................................................................................ 0157-2 Various Ordnance Stowage Lockers.................................................................................... 0157-3 AFT Mast.............................................................................................................................. 0157-4 Gun Mounts.......................................................................................................................... 0157-5 Life Raft................................................................................................................................ 0157-6 Various Ordnance Stowage Lockers.................................................................................... 0157-7 Vent Cover Gaskets............................................................................................................. 0157-8 Gun Mounts.......................................................................................................................... 0157-9

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION RADIO ROOM.................................................................................................................... WP 0158 Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0158-2 Radio Room Door Alarm...................................................................................................... 0158-2 Radio Room Door Alarm...................................................................................................... 0158-3 Radio Room Rooftop Air Conditioning Unit, Fan Unit, Air Filters, and Drain........................ 0158-4 Radio Room Rooftop Air Conditioning Unit, Remote........................................................... 0158-5

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION PILOTHOUSE..................................................................................................................... WP 0159 Table 1. Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0159-2 Chart Table........................................................................................................................... 0159-2 Navigation Lighting Panel..................................................................................................... 0159-3 General Alarm...................................................................................................................... 0159-4 Trim and Heel Clinometers................................................................................................... 0159-5 Ship Whistle Pull Valve........................................................................................................ 0159-6

xix

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Figure 16. Figure 17. Figure 18. Figure 19. Figure 20. Figure 21. Figure 22. Figure 23. Figure 24. Figure 25. Figure 26. Figure 27. Figure 28. Pilothouse Alarm Panel........................................................................................................ 0159-7 Pilothouse Console.............................................................................................................. 0159-8 Fire Pump START/STOP Panel........................................................................................... 0159-9 Searchlight Control Panel................................................................................................... 0159-10 Pilothouse Console and Clearview Screens...................................................................... 0159-11 Navigation Lighting Panel................................................................................................... 0159-12 Trim and Heel Clinometers................................................................................................. 0159-13 Ship Whistle Pull Valve and Pilothouse Console............................................................... 0159-14 Fire Pump START/STOP Panel......................................................................................... 0159-15 Searchlights........................................................................................................................ 0159-16 Control Air Pressure Gage and Command Transfer.......................................................... 0159-17 Clearview Screens............................................................................................................. 0159-18 Chart Table......................................................................................................................... 0159-19 Navigation Panel................................................................................................................ 0159-20 Navigation Lighting Panel................................................................................................... 0159-21 General Alarm and Emergency Stop Switches For Exhaust and Recirculation Fans........ 0159-22 Trim and Heel Clinometers................................................................................................. 0159-23 Pilothouse Alarm Panel...................................................................................................... 0159-23 Pilothouse Console............................................................................................................ 0159-24 Clearview Screens............................................................................................................. 0159-25 Clearview Screen Control Box........................................................................................... 0159-26 Searchlights........................................................................................................................ 0159-27 Pilothouse Console............................................................................................................ 0159-28

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION PILOTHOUSE TOP AND MASTS...................................................................................... WP 0160 Table 1. Figure 1. Figure 2. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.................... 0160-2 Magnetic Compass............................................................................................................... 0160-3 Mast and Yardarm................................................................................................................ 0160-4

xx

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Table 2. Fire Monitors........................................................................................................................ 0160-5 500 W Xenon Searchlights................................................................................................... 0160-6 Magnetic Compass............................................................................................................... 0160-7 Fire Monitor.......................................................................................................................... 0160-8 Magnetic Compass............................................................................................................... 0160-9 Magnetic Compass............................................................................................................. 0160-10 Mast and Yardarm.............................................................................................................. 0160-11 500 W Xenon Searchlights................................................................................................. 0160-13 Fire Monitors...................................................................................................................... 0160-13 Pilothouse and Radio Room Rooftop Air Conditioning Units............................................. 0160-14 Pilothouse and Radio Room Rooftop Air Conditioning Units, Air Filters............................ 0160-15 Pilothouse and Radio Room Rooftop Air Conditioning Units, Electrical Connections, Fan Blade..................................................................................................... 0160-16 Pilothouse and Radio Room Rooftop Air Conditioning Unit, Condenser Unit.................... 0160-17 Refrigerant Specifications.................................................................................................. 0160-18

Chapter 8 - MAINTENANCE INSTRUCTIONS FOR LT-800 SERIES INLAND AND COASTAL LARGE TUG (LT) MAINTENANCE..................................................................... WP 0161 Table 1. Large Tug Maintenance Publications. ................................................................................. 0161-1

Chapter 9 - SUPPORTING INFORMATION FOR LT-800 SERIES REFERENCES............................................................................................................................................ WP 0162 COMPONENTS OF END ITEM (COEI)/ON-BOARD SPARES LIST (OBSL) AND BASIC ISSUE ITEMS (BII) LISTS....................................................................................................................................... WP 0163 Table 1. Table 2. Components of End Item/On-Board Spares List.................................................................. 0163-2 Basic Issue Items (BII)..................................................................................................... 0163-125

ADDITIONAL AUTHORIZATION LIST (AAL).............................................................................................. WP 0164 Table 1. Additional Authorization List................................................................................................. 0164-2

EXPENDABLE AND DURABLE ITEMS LIST.............................................................................................. WP 0165 Table 1. Expendable and Durable Supplies and Materials List.......................................................... 0165-2

xxi

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

TABLE OF CONTENTS - Continued


Page No. WP Sequence No. GLOSSARY Index

xxii

03/15/2011 Rel(1.8) root(contents) wpno(F00005)

TM 55-1925-273-10-4

CHAPTER 5 OPERATOR TROUBLESHOOTING MASTER INDEX FOR LT-800 SERIES

TM 55-1925-273-10-4 OPERATOR MAINTENANCE OPERATOR TROUBLESHOOTING INDEX

0133

OPERATOR TROUBLESHOOTING SYMPTOM INDEX Malfunction/Symptom BILGE AND BALLAST SYSTEMS INOPERABLE 1. 2. Ballast tank(s) do not fill.................................................................................................................... WP 0135 Bilges will not pump.......................................................................................................................... WP 0135 Troubleshooting Procedure

BOW THRUSTER SYSTEM INOPERABLE 1. Bow thruster does not operate.......................................................................................................... WP 0135

COMPRESSED AIR SYSTEM INOPERABLE 1. 2. Air compressors do not run............................................................................................................... WP 0135 Receivers do not pressurize.............................................................................................................. WP 0135

CONTROL SYSTEM INOPERABLE 1. Propulsion system does not respond to controls............................................................................... WP 0135

ELECTRICAL SYSTEM INOPERABLE 1. Electrical system does not energize the vessel................................................................................. WP 0135

ENGINE ORDER TELEGRAPH (EOT) AND ALARM SYSTEMS INOPERABLE 1. EOT does not operate....................................................................................................................... WP 0135

FIRE MAIN, WASHDOWN, SPRINKLER SYSTEM INOPERABLE 1. 2. 3. 4. Fire main will not pressurize.............................................................................................................. WP 0135 General service water system will not pressurize............................................................................. WP 0135 Fire and general service pumps do not run....................................................................................... WP 0135 AFFF pump does not run.................................................................................................................. WP 0135

FUEL SYSTEM INOPERABLE 1. Fuel will not transfer between tanks.................................................................................................. WP 0135

HEATING, VENTILATION AND AIR CONDITIONING (HVAC) SYSTEMS INOPERABLE 1. Heating and/or air conditioning does not heat/cool the space.......................................................... WP 0135

0133-1

03/15/2011 Rel(1.8) root(tsindxwp) wpno(T00001)

TM 55-1925-273-10-4 OPERATOR TROUBLESHOOTING SYMPTOM INDEX - Continued Malfunction/Symptom 2.

0133

Troubleshooting Procedure

Ventilation fan will not run................................................................................................................. WP 0135

HYDRAULIC SYSTEMS INOPERABLE 1. 2. 3. 4. 5. Central HPU will not operate............................................................................................................. WP 0135 Anchor windlass will not operate....................................................................................................... WP 0135 Crane will not operate....................................................................................................................... WP 0135 Capstan will not operate.................................................................................................................... WP 0135 Towing machine will not operate....................................................................................................... WP 0135

INTERNAL COMMUNICATION SYSTEMS INOPERABLE 1. 2. 3. PA system does not operate............................................................................................................. WP 0135 Sound powered telephone will not operate....................................................................................... WP 0135 Intercom will not operate................................................................................................................... WP 0135

LUBRICATION AND HYDRAULIC OIL FILL AND TRANSFER SYSTEM INOPERABLE 1. Lube oil will not transfer.................................................................................................................... WP 0135

MAIN PROPULSION ENGINES INOPERABLE 1. 2. Main propulsion engine does not run................................................................................................ WP 0135 Main propulsion engine will not start................................................................................................. WP 0135

MARINE SANITATION DEVICE INOPERABLE 1. Marine sanitation device will not operate.......................................................................................... WP 0135

POTABLE WATER SYSTEM INOPERABLE 1. Potable water system will not pressurize.......................................................................................... WP 0135

POWER GENERATION SYSTEM INOPERABLE 1. Vessel receives no electrical power.................................................................................................. WP 0135

REFRIGERATION SYSTEM INOPERABLE 1. Refrigeration system will not cool refers............................................................................................ WP 0135

STEERING SYSTEM INOPERABLE 1. Steering system will not turn rudders................................................................................................ WP 0135

0133-2

03/15/2011 Rel(1.8) root(tsindxwp) wpno(T00001)

TM 55-1925-273-10-4 OPERATOR TROUBLESHOOTING SYMPTOM INDEX - Continued Malfunction/Symptom

0133

Troubleshooting Procedure

END OF WORK PACKAGE

0133-3/4 blank

03/15/2011 Rel(1.8) root(tsindxwp) wpno(T00001)

TM 55-1925-273-10-4

CHAPTER 6 OPERATOR TROUBLESHOOTING PROCEDURES FOR LT-800 SERIES

TM 55-1925-273-10-4 OPERATOR MAINTENANCE OPERATIONAL CHECKOUT

0134

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

To complete the operational checkout: 1. Perform all before PMCS items. 2. Perform all system startup procedures as detailed in the following work packages: Work Package (Volume 3, WP 0067) (Volume 3, WP 0068) (Volume 3, WP 0069) (Volume 3, WP 0070) (Volume 3, WP 0071) (Volume 3, WP 0072) (Volume 3, WP 0073) (Volume 3, WP 0074) (Volume 3, WP 0075) (Volume 3, WP 0076) Title Operation Under Usual Conditions: Preparation for Use Operation Under Usual Conditions: Power Generation Operation Under Usual Conditions: Compressed Air System Operation Under Usual Conditions: Fire Main, General Service, Aqueous Film Forming Foam (AFFF), and Washdown Countermeasure System Operation Under Usual Conditions: Main Propulsion System Operation Under Usual Conditions: Lube Oil Purification and Transfer Piping System Operation Under Usual Conditions: Fuel Oil Fill, Transfer, and Supply System Operation Under Usual Conditions: Bow Thruster Operation Under Usual Conditions: Hydraulic System Operation Under Usual Conditions: Steering System

0134-1

03/15/2011 Rel(1.8) root(opcheckwp) wpno(T00002)

TM 55-1925-273-10-4

0134

Work Package (Volume 3, WP 0077) (Volume 3, WP 0078) (Volume 3, WP 0079) (Volume 3, WP 0080) (Volume 3, WP 0081) (Volume 3, WP 0082) (Volume 3, WP 0083)

Title Operation Under Usual Conditions: Tank Level Indicator System Operation Under Usual Conditions: Bilge/Ballast Systems Operation Under Usual Conditions: Potable Water System Operation Under Usual Conditions: Marine Sanitation Device Operation Under Usual Conditions: Heating, Ventilation, Air Conditioning, and Refrigeration (HVACR) Systems Operation Under Usual Conditions: Intercommunication and sound Powered Telephone Systems Operation Under Usual Conditions: Engine Order Telegraph and General Alarm Systems

END OF WORK PACKAGE

0134-2

03/15/2011 Rel(1.8) root(opcheckwp) wpno(T00002)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE TROUBLESHOOTING PROCEDURES

0135

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required Watercraft Engineer 88L (1) Watercraft Operator 88K (1) References Volume 3, WP Volume 3, WP Volume 3, WP Volume 3, WP Volume 3, WP Volume 3, WP References (cont.) Volume 3, WP 0074 Volume 3, WP 0075 Volume 3, WP 0076 Volume 3, WP 0078 Volume 3, WP 0079 Volume 3, WP 0080 Volume 3, WP 0081 Volume 3, WP 0082 Volume 3, WP 0083 Volume 3, WP 0085 Volume 3, WP 0086 Volume 3, WP 0087 Volume 3, WP 0088 Equipment Condition N/A

0068 0069 0070 0071 0072 0073

INTRODUCTION 1. The procedures in this work package are organized in a step-by-step approach to isolate the problem. Tests, inspections, and actions should be performed in the order listed. 2. Before performing any troubleshooting procedure, read and follow all safety instructions found in the Warning Summary at the front of the manual. 3. The troubleshooting procedures in this work package cannot list all the probable causes or correct all symptoms and malfunctions encountered. However, if a symptom is not listed or the stated test, inspections, or corrective actions do not correct the problem, notify the maintenance supervisor.

0135-1

03/15/2011 Rel(1.8) root(tswp) wpno(T00003)

TM 55-1925-273-10-4 TROUBLESHOOTING PROCEDURE OPERATORS TROUBLESHOOOTING SYMPTOM BILGE AND BALLAST SYSTEMS INOPERABLE MALFUNCTION Ballast tank(s) do not fill. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0078)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0078). Do(es) the ballast tank(s) fill? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135

MALFUNCTION Bilges will not pump. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0078)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0078). Do the bilges pump? a. b. SYMPTOM BOW THRUSTER SYSTEM INOPERABLE MALFUNCTION Bow thruster does not operate. CORRECTIVE ACTION 1. 2. Was the proper operating procedure followed (Volume 3, WP 0074)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0074). If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135-2

03/15/2011 Rel(1.8) root(tswp) wpno(T00003)

TM 55-1925-273-10-4 OPERATORS TROUBLESHOOOTING - Continued CORRECTIVE ACTION - Continued 3. Does the bow thruster operate? a. b. SYMPTOM COMPRESSED AIR SYSTEM INOPERABLE MALFUNCTION Air compressors do not run. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0069)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0069). Do the air compressors run? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135

MALFUNCTION Receivers do not pressurize. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0069)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0069). Do the receivers pressurize? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135-3

03/15/2011 Rel(1.8) root(tswp) wpno(T00003)

TM 55-1925-273-10-4 OPERATORS TROUBLESHOOOTING - Continued SYMPTOM CONTROL SYSTEM INOPERABLE MALFUNCTION Propulsion system does not respond to controls. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0071)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0071). Does the propulsion system respond to controls? a. b. SYMPTOM ELECTRICAL SYSTEM INOPERABLE MALFUNCTION Electrical system does not energize the vessel. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0068)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0068). Does the electrical system energize the vessel? a. b. SYMPTOM ENGINE ORDER TELEGRAPH (EOT) AND ALARM SYSTEMS INOPERABLE MALFUNCTION EOT does not operate. CORRECTIVE ACTION 1. Was the proper operating procedure followed (Volume 3, WP 0083)? If yes, notify the maintenance supervisor of the defect. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135

0135-4

03/15/2011 Rel(1.8) root(tswp) wpno(T00003)

TM 55-1925-273-10-4 OPERATORS TROUBLESHOOOTING - Continued CORRECTIVE ACTION - Continued 2. 3. Follow the proper operating procedure (Volume 3, WP 0083). Does EOT operate? a. b. SYMPTOM FIRE MAIN, WASHDOWN, SPRINKLER SYSTEM INOPERABLE MALFUNCTION Fire main will not pressurize. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0070)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0070). Does the fire main pressurize? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135

MALFUNCTION General service water system will not pressurize. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0070)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0070). Does the general service water system pressurize? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

MALFUNCTION Fire and general service pumps do not run. CORRECTIVE ACTION 1. Was the proper operating procedure followed (Volume 3, WP 0070)? If yes, notify the maintenance supervisor of the defect.

0135-5

03/15/2011 Rel(1.8) root(tswp) wpno(T00003)

TM 55-1925-273-10-4 OPERATORS TROUBLESHOOOTING - Continued CORRECTIVE ACTION - Continued 2. 3. Follow the proper operating procedure (Volume 3, WP 0070). Do the fire and general service pumps run? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135

MALFUNCTION AFFF pump does not run. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0070)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0070). Does AFFF pump run? a. b. SYMPTOM FUEL SYSTEM INOPERABLE MALFUNCTION Fuel will not transfer between tanks. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0073)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0073). Does fuel transfer bewteen tanks? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135-6

03/15/2011 Rel(1.8) root(tswp) wpno(T00003)

TM 55-1925-273-10-4 OPERATORS TROUBLESHOOOTING - Continued SYMPTOM HEATING, VENTILATION, AND AIR CONDITIONING (HVAC) SYSTEM INOPERABLE MALFUNCTION Heating and/or air conditioning does not heat/cool the space. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0081)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0081). Does heating and/or air conditioning heat/cool the space? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135

MALFUNCTION Ventilation fan will not run. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0081)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0081). Does the ventilation fan run? a. b. SYMPTOM HYDRAULIC SYSTEM INOPERABLE MALFUNCTION Central HPU will not operate. CORRECTIVE ACTION 1. 2. Was the proper operating procedure followed (Volume 3, WP 0075)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0075). If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135-7

03/15/2011 Rel(1.8) root(tswp) wpno(T00003)

TM 55-1925-273-10-4 OPERATORS TROUBLESHOOOTING - Continued CORRECTIVE ACTION - Continued 3. Does the central HPU operate? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135

MALFUNCTION Anchor windlass will not operate. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0086)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0086). Does the anchor windlass operate? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

MALFUNCTION Crane will not operate. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0085)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0085). Does the crane operate? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

MALFUNCTION Capstan will not operate. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0087)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0087). Does the capstan operate? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135-8

03/15/2011 Rel(1.8) root(tswp) wpno(T00003)

TM 55-1925-273-10-4 OPERATORS TROUBLESHOOOTING - Continued MALFUNCTION Towing machine will not operate. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0088)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0088). Does the towing machine operate? a. b. SYMPTOM INTERNAL COMMUNICATION SYSTEMS INOPERABLE MALFUNCTION PA system does not operate. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0082)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0082). Does the PA system operate? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135

MALFUNCTION Sound powered telephone will not operate. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0082)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0082). Does the sound powered telephone operate? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135-9

03/15/2011 Rel(1.8) root(tswp) wpno(T00003)

TM 55-1925-273-10-4 OPERATORS TROUBLESHOOOTING - Continued MALFUNCTION Intercom will not operate. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0082)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0082). Does the intercom operate? a. b. SYMPTOM LUBRICATION AND HYDRAULIC OIL FILL AND TRANSFER SYSTEM INOPERABLE MALFUNCTION Lube oil will not transfer. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0072)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0072). Does the lube oil transfer? a. b. SYMPTOM MAIN PROPULSION ENGINES INOPERABLE MALFUNCTION Main propulsion engine does not run. CORRECTIVE ACTION 1. 2. Was the proper operating procedure followed (Volume 3, WP 0071)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0071). If yes, fault is corrected. If no, notify the maintenance supervisor of the defect. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135

0135-10

03/15/2011 Rel(1.8) root(tswp) wpno(T00003)

TM 55-1925-273-10-4 OPERATORS TROUBLESHOOOTING - Continued CORRECTIVE ACTION - Continued 3. Does the main propulsion engine run? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135

MALFUNCTION Main propulsion engine does not start. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0071)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0071). Does the main propulsion engine start? a. b. SYMPTOM MARINE SANITATION DEVICE INOPERABLE MALFUNCTION Marine sanitation device will not operate. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0080)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0080). Does the marine sanitation device operate? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135-11

03/15/2011 Rel(1.8) root(tswp) wpno(T00003)

TM 55-1925-273-10-4 OPERATORS TROUBLESHOOOTING - Continued SYMPTOM POTABLE WATER SYSTEM INOPERABLE MALFUNCTION Potable water system will not pressurize. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0079)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0079). Does the potable water system pressurize? a. b. SYMPTOM POWER GENERATION SYSTEM INOPERABLE MALFUNCTION Vessel receives no electrical power. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0068)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0068). Does the vessel receive electrical power? a. b. SYMPTOM REFRIGERATION SYSTEM INOPERABLE MALFUNCTION Refrigeration system will not cool refers. CORRECTIVE ACTION 1. Was the proper operating procedure followed (Volume 3, WP 0081)? If yes, notify the maintenance supervisor of the defect. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135

0135-12

03/15/2011 Rel(1.8) root(tswp) wpno(T00003)

TM 55-1925-273-10-4 OPERATORS TROUBLESHOOOTING - Continued CORRECTIVE ACTION - Continued 2. 3. Follow the proper operating procedure (Volume 3, WP 0081). Does the refrigeration system cool the refers? a. b. SYMPTOM STEERING SYSTEM INOPERABLE MALFUNCTION Steering system will not turn rudders. CORRECTIVE ACTION 1. 2. 3. Was the proper operating procedure followed (Volume 3, WP 0076)? If yes, notify the maintenance supervisor of the defect. Follow the proper operating procedure (Volume 3, WP 0076). Does the steering system turn the rudders? a. b. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect. If yes, fault is corrected. If no, notify the maintenance supervisor of the defect.

0135

END OF WORK PACKAGE

0135-13/14 blank

03/15/2011 Rel(1.8) root(tswp) wpno(T00003)

TM 55-1925-273-10-4

CHAPTER 7 OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) MAINTENANCE INSTRUCTIONS FOR LT-800 SERIES

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INTRODUCTION

0136

PURPOSE AND USE OF PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) DATA Preventive Maintenance Checks and Services (PMCS) is performed to keep the Large Tug (LT) in operating condition. The checks are used to find, correct, and report problems so that defects may be discovered and corrected. PMCS is to be accomplished each day the LT is operated using the appropriate work packages. Pay attention to all WARNINGS, CAUTIONS, and NOTES that precede individual steps. WARNINGS indicate possible danger to personnel. CAUTIONS indicate possible damage to equipment. NOTES are for clarification and additional information. An explanation is prepared for each PMCS check entry, and for any general checks and services common to an entire piece of equipment or system. An explanation of PMCS chart columns follows: ITEM NUMBER COLUMN The checks and services are numbered within a specific work package in chronological order. INTERVAL This column indicates the periodicity of the check or service. 1. Before LT operation, do Before PMCS. 2. During LT operation, do During PMCS. 3. After LT operation, do After PMCS. 4. Once a week do Weekly PMCS. 5. Do Monthly PMCS once a month. If equipment has not been operated in a month, also do During PMCS at the same time as Monthly PMCS. 6. Do Quarterly PMCS once a month. If equipment has not been operated in a quarter, also do After PMCS at the same time as Quarterly PMCS. 7. Do Semiannual PMCS once every six months. If the equipment has not been operated within the last six months, also do the Monthly PMCS at the same time as the Semiannual PMCS. 8. Do Annual PMCS once a year. 9. If a deficiency is noted when performing PMCS, fix it, if possible, using troubleshooting procedures and/or maintenance procedures. If the deficiency cannot be corrected, write up the items not fixed on DA Form 2404 for Field Maintenance. For further information on how to use this form, see DA PAM 750-8. MANHOUR This column indicates the projected amount of time that is expected to take to complete the check or service. Checks and services that require additional personnel include a cumulative amount of time. ITEM TO BE CHECKED OR SERVICED This column lists the equipment or item to be checked or serviced.

0136-1

03/15/2011 Rel(1.8) root(pmcsintrowp) wpno(I00001)

TM 55-1925-273-10-4 PROCEDURE COLUMN

0136

This column contains a brief description of how to perform the checks and services, or it contains the reference to the work package or technical manual that contains the procedural information. Carefully follow the instructions. If the necessary tools are not available, or if the procedure tells you to, have Field Maintenance do the work. EQUIPMENT NOT READY/AVAILABLE IF Lists the criteria that will limit the use of equipment, or make it not ready for use. Depending on the severity of the limitation, the LT may not be able to operate and perform its primary mission. The terms "ready/available" and "mission capable" refer to the same status: Equipment is on hand and can perform its combat mission. If tools required to perform PMCS are not listed in the work package, notify Field Maintenance. Write up items not fixed on DA Form 2404 for Field Maintenance. For further information on how to use this form, see DA PAM 750-8. DOCUMENTATION OF PMCS ITEM FAILURES PMCS item failures are to be recorded on DA Form 2404, Equipment Inspection, and Maintenance Worksheet, and forwarded to Field Maintenance via the vessel's Chief Engineer. Documentation of PMCS item failures must include the compartment location and item number within the work package to ensure proper dissemination. All corrected faults will be recorded on DA Form 4640 (Harbor Boat Deck Department Log for Class A&B Vessels) and DA Form 4993 (Harbor Boat Engine Department Log for Class A and C-1 vessels). All uncorrected faults will be transcribed to a DA Form 2407, Maintenance Request, and the appropriate log entry must be made. The crew will service the LT as outlined by the intervals contained in the PMCS tables. CORROSION PREVENTION AND CONTROL (CPC) Corrosion Prevention and Control (CPC) of Army materiel is a continuing concern. It is important that any corrosion problems be reported so that they can be corrected and improvements made to prevent future problems. Corrosion is typically associated with rusting of metals, but it can also include deterioration of other materials, such as rubber and plastic. Unusual cracking, softening, swelling, or breaking of materials may indicate a corrosion problem. Suspected corrosion problems should be reported using SF Form 368 (Product Quality Deficiency Report). Use of key words such as "corrosion," "rust," "deterioration," or "cracking" will ensure that the information is identified as a CPC problem. LEAKAGE DEFINITION

NOTE
Equipment operation is allowable with minor leakages (Class I or II) except for fuel leaks. Of course, consideration must be given to the fluid capacity of the item or system being checked. When in doubt, ask your supervisor. When operating with Class I or II leaks, continue to check fluid levels as required in your PMCS. Class III leaks should be reported immediately to your supervisor. It is necessary to know how fluid leakage affects the status of the LT. The following are definitions of the classes of leakage an operator or crewmember needs to know to be able to determine the condition of the leak. Learn and then be familiar with them. When in doubt, ask your supervisor.

0136-2

03/15/2011 Rel(1.8) root(pmcsintrowp) wpno(I00001)

TM 55-1925-273-10-4

0136

LEAKAGE CLASSIFICATIONS I, II, III Leakage classifications. Leakage definitions for operator/crew PMCS shall be classified as follows: 1. Class I: Seepage of fluid (as indicated by wetness or discoloration) not great enough to form drops. 2. Class II: Leakage of fluid great enough to form drops but not enough to cause drops to drip from the item being checked/inspected. 3. Class III: Leakage of fluid great enough to form drops that fall from the item being checked/inspected. INSPECTION Look for signs of a problem or trouble. Senses help here. You can feel, smell, hear, or see many problems. Be alert when on the vessel. Inspect to see if items are in good condition. Are they correctly assembled, stowed, secured, excessively worn, leaking, corroded, or properly lubricated? Correct any problems found or notify Field Maintenance. There are some common items to check all over the LT. These include the following: 1. Bolts, clamps, nuts, and screws: Continuously check for looseness. Look for chipped paint, bare metal, rust, or corrosion around bolt and screw heads and nuts. Tighten them when you find them loose. If tools are not available, notify Field Maintenance. 2. Welds: Many items on the LT are welded. To check these welds, look for chipped paint, rust, corrosion, or gaps. When these conditions exist, notify Field Maintenance on DA Form 2404. 3. Electrical wires, connectors and harnesses: Tighten loose connectors. Look for cracked or broken insulation, bare wires, and broken connectors. If any are found, notify Field Maintenance. 4. Hoses and fluid lines: Look for wear, damage, and leaks, and make sure clamps and fittings are tight. Wet spots mean a leak. A stain by a fitting or connector can also mean a leak. When you find a leak, notify Field Maintenance.

0136-3

03/15/2011 Rel(1.8) root(pmcsintrowp) wpno(I00001)

TM 55-1925-273-10-4

0136

GENERAL STATEMENT OF LUBRICATION REQUIREMENTS Any lubricants called out by PMCS in this manual are identified by standard military symbols (MIL-HDBK-113 C and MIL-HDBK-275 A). LUBRICATION SERVICE INTERVALS - NORMAL CONDITIONS For safer, more trouble free operations, make sure that your LT is serviced when it needs it. For the proper lubrication and service intervals, see (WP 0137) and (WP 0138). LUBRICATION SERVICE INTERVALS - UNUSUAL CONDITIONS The LT may require extra service and care when it is operated under unusual conditions. High or low temperatures, long periods of hard use, or continued use in a dirty environment will break down the lubricants and fluids, requiring more frequent service. LUBRICATION UNIVERSALS 1. Always clean fittings before lubricating them. Failure to do so can force contaminants into the bearing. 2. Always use the PMCS work packages as the guide for lubrication. 3. Never use the wrong type/grade of lubricant. 4. Never use too much lubricant. END OF WORK PACKAGE

0136-4

03/15/2011 Rel(1.8) root(pmcsintrowp) wpno(I00001)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION GENERAL

0137

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0137-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1. Preventive Maintenance Checks and Services (PMCS) Including Lubrication.
ITEM NO. 1 MAN HOURS 20.0 ITEM TO BE CHECKED OR SERVICED ENTIRE VESSEL GENERAL VESSEL CLEANLINESS EQUIPMENT NOT READY/ AVAILABLE IF:

0137

INTERVAL Before

PROCEDURE Inspect glass, frames, and brackets for damage. Clean all windows, vents and ports, and inspect the entire vessel for cleanliness.

Before

0.5

LIFE LINES AND Ensure that life lines are in good condition, STANCHIONS and are secured in place. Visually inspect Life Lines and safety chains for wear and corrosion. Stanchions Safety Chains Ensure that safety chains are utilized where required.

Before

0.2

LIFE LINE SAFETY CHAINS

WINDOWS

STANCHIONS

US ARMY LT - 803

18 17 16 15 14 13

15 14 13 12 11 10 9

I0001T73

Figure 1.

Life Lines and Stanchions.

0137-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 4

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.3 ITEM TO BE CHECKED OR SERVICED LIFE SAVING EQUIPMENT LIFE JACKETS Life Jacket Condition Life Jacket Light and Whistle EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Inspect jackets for rips, oil stains, broken Life jackets are straps, fiber deterioration, and hull marking unserviceable. of vessel. Ensure a sufficient number onboard for passengers and crew. Check that the chemical light is attached to the life jacket, that the case is not damaged, and that the expiration date has not passed. Check that the whistle is attached and not damaged. Chemical light is missing or case is damaged. Whistle is missing or damaged.

Before

0.3

CHEMICAL LIGHT

HULL MARKING

WHISTLE STRAPS STRAPS


Figure 2. Life Jackets.
I0002T73

0137-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 6

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Life Rings EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Inspect for damage and proper marking. Life ring damaged. Marker Check that the marker light functions when light inoperable. the casing is turned upright.

HULL MARKING

US

AV

MARKER LIGHT

LT

803
HULL MARKING

I0003T73

Figure 3. Life Rings.

0137-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 7

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: Damage or condition exists fire alarm pull station inoperable.

INTERVAL Before

PROCEDURE

FIRE Inspect box and pull handles for damage. DETECTION, Document all defects and discrepancies, SUPPRESSION, and refer to Field Maintenance. AND ALARM SYSTEMS Fire Alarm Pull Station

FIRE ALARM PULL STATION

BOX HANDLE

PULL

DOWN

I0004T73

Figure 4. 8 Before 3.0

Fire Detection, Suppression, and Alarm Systems. Damage or condition that makes the detector inoperable.

Thermal Heat Inspect thermal heat detectors and Detectors and ionization smoke detectors for damage. Ionization Smoke Detectors

IONIZATION SMOKE DETECTOR

THERMAL HEAT DETECTOR

I0005T73

Figure 5.

Fire Detection, Suppression, and Alarm Systems.

0137-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 9

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 2.0 ITEM TO BE CHECKED OR SERVICED FIRE STATIONS Hose and Connection EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING
During inspections, immediately report any defects to your supervisor and correct without delay, or refer to field maintenance. a. Inspect the fire hose in the hose rack for tears, fraying, or cuts. b. Check hose connections for tightness. Hose is unserviceable. Connections will not attach properly.

10

Before

0.7

Nozzle

Check nozzle and nozzle handle for proper Nozzle is unserviceable. operation.

HOSE RACK NOZZLE

FIRE HOSE

I0006T73

Figure 6. Fire Stations.

0137-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 11

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PORTABLE FIRE EXTINGUISHERS EQUIPMENT NOT READY/ AVAILABLE IF: Extinguisher discharged or damaged.

INTERVAL Before

PROCEDURE a. Inspect for tight mounting, full charge, corroded nozzles, and closed valves. b. Verify that certification information is correct and that the seals have not been tampered with. Direct particular attention to extinguisher lines and nozzles in the engine room, checking damage.

Extinguisher is damaged, the seal is broken, and/or the certification is out of date.

LINE

NOZZLE

PORTABLE FIRE EXTINGUISHER

I0007T73

Figure 7. Portable Fire Extinguishers.

0137-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 12

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED INTERCOM SYSTEM Exterior Hardware EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Visually inspect exterior for damage, water accumulation, or dirt buildup. Clean using a soft cloth. Inspect mounting hardware for tightness. Tighten as necessary.

13

Before

0.3

MOUNTING HARDWARE

INDICATOR LAMPS

OPERATING INSTRUCTIONS REL

CALL

BUSY

PRESS TO RELEASE

PUSHBUTTONS

CONTROL SWITCH

PRESS TO RELEASE

VOLUME
OFF

DIMMER

MIC OR

HANDS FREE MAL

ROTARY SWITCH

HANDSET

PRESS TO TALK

HANDS FREE SWITCH


I0008T73

Figure 8.

Intercom System.

0137-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 14

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED HVAC EQUIPMENT Supply and Exhaust Fans EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Check units for unusual noises or excessive If either fan fails to vibration and that intake/exhaust screens operate. are clean and free of debris.

EXHAUST FANS

SUPPLY FAN
I0009T73

Figure 9. HVAC Equipment.

0137-9

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 15 16

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 0.3 ITEM TO BE CHECKED OR SERVICED Thermostats Air Conditioner Units EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before Before

PROCEDURE Visually check thermostats for signs of wear, dirt buildup, damage, and corrosion. Check units for operation. Check oil level and state of charge. Check the moisture sight glass for bubbles.

If main deck A/C air handler fails to operate.

TO AIR HANDLING UNIT

MAIN AC PLANT THERMOSTAT

THERMOSTAT MOISTURE SIGHT GLASS

OIL LEVEL SIGHT GLASS


I0010T73

Figure 10. Air Conditioner Units.

0137-10

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 17

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.5 ITEM TO BE CHECKED OR SERVICED Unit Heaters EQUIPMENT NOT READY/ AVAILABLE IF: Heaters do not operate when turned on.

INTERVAL Before

PROCEDURE Check that heater mountings are secure. Check for obvious damage. Ensure that heaters operate when they are turned on.

UNIT HEATER

60

50

40

100

I0011T73

Figure 11. Unit Heaters.

0137-11

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 18

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 4.0 ITEM TO BE CHECKED OR SERVICED PIPING SYSTEMS Piping EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Visually inspect all piping for leaks. Pay Class III leaks. Any fuel, particular attention to all valves coolant, or oil leaks. connections, joints, etc. Correct all leaks or document and report discrepancies/ damage/Class III leakage to engineer on watch and Field Maintenance.

PIPING

I0012T73

Figure 12. 19 Before 1.0

Piping Systems. Pressure reducing valve inoperative.

Pressure Inspect all pressure reducing valves for Reducing Valves proper operation. Report discrepancies/ damage to engineer on watch and Field Maintenance.

PRESSURE REDUCING VALVE

I0013T73

Figure 13.

Pressure Reducing Valves.

0137-12

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 20

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED Sanitary Spaces EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Visually inspect all faucets on lavatories Class III leaks from the and showers for leaks. Inspect all water sewage system. closets for leaks and stoppage. Inspect the shower and lavatory drains to ensure that they are unstopped. If Class III leakage is observed, or if drains or commodes are stopped, refer to supervisor and to Field Maintenance.

SHOWER

FAUCETS

LAVATORY

LAVATORY DRAIN

WATER CLOSET
I0014T73

Figure 14.

Sanitary Spaces.

0137-13

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 21

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 20.0 ITEM TO BE CHECKED OR SERVICED ENTIRE VESSEL GENERAL VESSEL CLEANLINESS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE Inspect glass, frames, and brackets for damage. Clean all windows, vents and ports, and inspect the entire vessel for cleanliness.

22

During

0.5

LIFE LINES AND Ensure that life lines are in good condition, STANCHIONS and are secured in place. Visually inspect Life Lines and safety chains for wear and corrosion. Stanchions Safety Chains Ensure that safety chains are utilized where required.

23

During

0.2

LIFE LINE SAFETY CHAINS

WINDOWS STANCHIONS

US ARMY LT - 803

18 17 16 15 14 13

15 14 13 12 11 10 9

I0015T73

Figure 15.

Life Lines and Stanchions.

0137-14

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 24

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.3 ITEM TO BE CHECKED OR SERVICED LIFESAVING EQUIPMENT Life Jacket Condition Life Jacket Light and Whistle EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

Inspect jackets for rips, oil stains, broken Life jackets are straps, fiber deterioration, and hull marking unserviceable. of vessel. Ensure a sufficient number onboard for passengers and crew. Check that the chemical light is attached to the life jacket, that the case is not damaged, and that the expiration date has not passed. Check that the whistle is attached and not damaged. Chemical light is missing or case is damaged. Whistle is missing or damaged.

25

During

0.3

CHEMICAL LIGHT

HULL MARKING

WHISTLE STRAPS STRAPS


Figure 16. Lifesaving Equipment.
I0016T73

0137-15

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 26

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Life Rings EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

Inspect for damage and proper marking. Life ring damaged. Check that the marker light functions when Marked light inoperable. the casing is turned upright.

HULL MARKING

US

AV

MARKER LIGHT

LT

803
HULL MARKING

I0017T73

Figure 17. Life Rings.

0137-16

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 27

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: Damage or condition exists fire alarm pull inoperable.

INTERVAL During

PROCEDURE

FIRE Inspect box and pull handles for damage. DETECTION, Document all defects and discrepancies, SUPPRESSION, and refer to Field Maintenance. AND ALARM SYSTEMS Fire Alarm Pull Station

FIRE ALARM PULL STATION

BOX HANDLE

PULL

DOWN

I0018T73

Figure 18. 28 During 3.0

Fire Detection, Suppression, and Alarm Systems. Damage or condition that makes the detector inoperable.

Thermal Heat Inspect thermal heat detectors and Detectors and ionization smoke detectors for damage. Ionization Smoke Detectors

IONIZATION SMOKE DETECTOR

THERMAL HEAT DETECTOR

I0019T73

Figure 19.

Fire Detection, Suppression, and Alarm Systems.

0137-17

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 29

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 2.0 ITEM TO BE CHECKED OR SERVICED FIRE STATIONS Hose and Connection EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

WARNING
During inspections, immediately report any defects to your supervisor and correct without delay, or refer to field maintenance. a. Inspect the fire hose in the hose rack for tears, fraying, or cuts. b. Check hose connections for tightness. Hose is unserviceable. Connections will not attach properly.

30

During

0.7

Nozzle

Check nozzle and nozzle handle for proper Nozzle is unserviceable. operation.

HOSE RACK NOZZLE

FIRE HOSE

I0020T73

Figure 20. Fire Stations.

0137-18

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 31

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PORTABLE FIRE EXTINGUISHERS EQUIPMENT NOT READY/ AVAILABLE IF: Extinguisher discharged or damaged.

INTERVAL During

PROCEDURE a. Inspect for tight mounting, full charge, corroded nozzles, and closed valves. b. Verify that certification information is correct and that the seals have not been tampered with. Direct particular attention to extinguisher lines and nozzles in the engine room, checking damage.

Extinguisher is damaged, the seal is broken, and/or the certification is out of date.

LINE

NOZZLE

PORTABLE FIRE EXTINGUISHER

I0021T73

Figure 21. Portable Fire Extinguishers.

0137-19

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 32

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED INTERCOM SYSTEM Rotary switches Unit Performance EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

Check mechanical operation of each rotary Damaged or defective switch. Replace any worn or incorrectly parts. operating parts. Check the two-way voice capability of the master station. Select the other stations on the system and conduct a two-way conversation. Transmissions and receptions should be clear, undistorted and easily understood. The CALL lamps at the called station(s) should be lit. The REL lamp at the calling station should be lit. If the called station is busy, the BUSY light should be lit.

33

During

2.0

34

During

0.3

Indicator Lamps

35

During

0.3

Control Switches Check the control switches. Vary the position of the dimmer control switch and observe the intensity of the panel illumination. Vary the VOLUME control during reception, and verify that the intensity of received speech is controlled.

0137-20

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 36

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED Hands Free Operation EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

Check the hands free capability by One or more unit operating hands free with another station in malfunctions occur. the system.

MOUNTING HARDWARE

INDICATOR LAMPS

OPERATING INSTRUCTIONS REL

CALL

BUSY

PRESS TO RELEASE

PUSHBUTTONS

CONTROL SWITCH

PRESS TO RELEASE

VOLUME
OFF

DIMMER

MIC OR

HANDS FREE MAL

ROTARY SWITCH

HANDSET

PRESS TO TALK

HANDS FREE SWITCH


I0022T73

Figure 22. Intercom System.

0137-21

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 37

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED SOUND POWERED TELEPHONES Head Set-Chest Set EQUIPMENT NOT READY/ AVAILABLE IF: Any part of this system fails to operate.

INTERVAL During

PROCEDURE a. Visually inspect head set connections to the chest set for frayed wiring or loose connections.

b. Inspect ear cups for tears and cleanliness. c. Inspect neck straps for fraying or missing fasteners. d. Press pushbutton on the mouthpiece and release. Verify that the pushbutton goes in and out. e. Visually inspect the wire from chest set to jack plug for loose connections, cracks, or damaged insulation. 38 During 0.2 Transmission Reception Check the two-way voice capability of the headset. Select another station on the system and conduct a two-way conversation. Transmission and receptions should be clear, undistorted, and easily understood.

0137-22

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

HEADSET

EAR CUPS MOUTH PIECE PUSHBUTTON CHEST SET JACK PLUG WIRING
I0023T73

WIRING NECK STRAP

Figure 23. Sound Powered Telephones.

0137-23

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 39

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED Exterior Handsets Wiring Exterior EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE Visually inspect the handset and wiring for loose connections. Tighten as necessary. Visually inspect exterior for damage, water accumulation, or dirt buildup. Clean using a soft, clean cloth. Check mechanical operation for each rotary switch. Transmissions and receptions should be clear, undistorted and easily understood.

40

During

1.5

41 42

During During

0.5 1.0

Rotary Switches Operation

0137-24

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 43

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED Indicators EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE Check the audible alarms and indicators, where applicable. On model SWLR, the indicator light should light along with the calling signal. Document all observed Unit Malfunctions and refer to Field Maintenance.

EXTERIOR HANDSET

ROTARY SWITCH

HANDSET
Figure 24.

WIRING
I0024T73

Exterior Handsets.

0137-25

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 44

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 4.5 ITEM TO BE CHECKED OR SERVICED POWER DISTRIBUTION SYSTEM (INCLUDING 24 V DC PANELS) Panels EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

WARNING

Electrical wiring, panels, and components contain high voltages that can cause severe injury or death.

NOTE
Electrical wiring checks and services consists of visual inspections only. Observe all CAUTION and WARNING labels on electrical equipment. a. Inspect power and lighting panels, If any part of this system fails. motor controllers, and other electrical Panel is not securely panels for secure mounting. mounted. b. Visually inspect panel surfaces for Panel has damage that could affect its operation. damage.

0137-26

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 45

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED Interior and Exterior Lighting EQUIPMENT NOT READY/ AVAILABLE IF: Emergency lighting fixtures do not operate when turned on.

INTERVAL During

PROCEDURE Inspect lighting fixtures for secure mountings and obvious damage. Ensure that fixtures operate when turned on.

INTERIOR LIGHTING

120 V DISTRIBUTION PANEL No. 4 24 V MACHINERY DC DISTRIBUTION PANEL


Figure 25.

400 V POWER PANEL No. 1 LOAD CENTER DISTRIBUTION PANEL


I0025T73

Power Distribution System (Including 24 V DC Panels).

0137-27

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 46

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED HVAC EQUIPMENT Supply and Exhaust Fans Thermostats EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

Check units for unusual noises or excessive If either fan fails to vibration and that the intake/exhaust operate. screens are clean and free of debris. Visually check thermostats for signs of wear, dirt buildup, damage, and corrosion.

47

During

0.3

EXHAUST FANS

SUPPLY FAN
I0026T73

Figure 26. HVAC Equipment.

0137-28

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 48

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED Air Conditioner Units EQUIPMENT NOT READY/ AVAILABLE IF: If main deck A/C air handler fails to operate.

INTERVAL During

PROCEDURE Check units for operation.

TO AIR HANDLING UNIT

MAIN AC PLANT THERMOSTAT

THERMOSTAT MOISTURE SIGHT GLASS

OIL LEVEL SIGHT GLASS


I0027T73

Figure 27. Air Conditioner Units.

0137-29

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 49

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED Unit Heaters EQUIPMENT NOT READY/ AVAILABLE IF: Heaters do not operate when turned on.

INTERVAL During

PROCEDURE Check that heater mountings are secure. Check for obvious damage. Ensure that heaters operate when they are turned on.

UNIT HEATER

60

50

40

100

I0028T73

Figure 28. Unit Heaters.

0137-30

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 50

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: Pressure reducing valve inoperative.

INTERVAL During

PROCEDURE

Pressure Inspect all pressure reducing valves for Reducing Valves proper operation. Report discrepancies/ damage to engineer on watch and Field Maintenance.

PRESSURE REDUCING VALVE

I0029T73

Figure 29. 51 During 1.0 Sanitary Spaces

Piping Systems. Class III leaks from the sewage system.

Visually inspect all faucets on lavatories and showers for leaks. Inspect all water closets for leaks and stoppage. Inspect shower and lavatory drains to ensure that they are unstopped. If Class III leakage is observed, or if drains or commodes are stopped, refer to supervisor and to Field Maintenance.

SHOWER

FAUCETS

LAVATORY

LAVATORY DRAIN

WATER CLOSET
I0030T73

Figure 30.

Sanitary Spaces.

0137-31

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 52

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 20.0 ITEM TO BE CHECKED OR SERVICED ENTIRE VESSEL GENERAL VESSEL CLEANLINESS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE Inspect glass, frames, and brackets for damage. Clean all windows, vents ports, and inspect the entire vessel for cleanliness.

53

After

0.5

LIFE LINES AND Ensure that life lines are in good condition, STANCHIONS and are secured in place. Visually inspect Life Lines and safety chains for wear and corrosion. Stanchions Safety Chains Ensure that safety chains are utilized where required.

54

After

0.2

LIFE LINE SAFETY CHAINS

WINDOWS STANCHIONS

US ARMY LT - 803

18 17 16 15 14 13

15 14 13 12 11 10 9

I0031T73

Figure 31. Safety Chains.

0137-32

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 55

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.3 ITEM TO BE CHECKED OR SERVICED LIFESAVING EQUIPMENT LIFE JACKETS Life Jacket Condition Life Jacket Light and Whistle EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

Inspect jackets for rips, oil stains, broken Life jackets are straps, fiber deterioration, and hull marking unserviceable. of vessel. Ensure a sufficient number onboard for passengers and crew. Check that the chemical light is attached to Chemical light is missing the life jacket, that the case is not damaged, or case is damaged. and that the expiration date has not passed. Whistle is missing or damaged.

56

After

0.3

CHEMICAL LIGHT

HULL MARKING

WHISTLE STRAPS STRAPS


Figure 32. Lifesaving Equipment.
I0032T73

0137-33

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 57

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Life Rings EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

Inspect for damage and proper marking. Life ring damaged. Marker Check that the marker light functions when light is inoperable. the casing is turned upright.

HULL MARKING

US

AV

MARKER LIGHT

LT

803

HULL MARKING

I0033T73

Figure 33. Life Rings.

0137-34

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 58

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED PIPING SYSTEMS Sanitary Spaces EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks from the sewage system.

INTERVAL After

PROCEDURE Visually inspect all faucets on lavatories and showers for leaks. Inspect all water closets for leaks and stoppage. Inspect shower and lavatory drains to ensure that they are unstopped. If Class III leakage is observed, or if drains or commodes are stopped, refer to supervisor and to Field Maintenance.

SHOWER

FAUCET

LAVATORY

LAVATORY DRAIN

WATER CLOSET
I0034T73

Figure 34.

Sanitary Spaces.

0137-35

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 59

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: Damage or condition exists fire alarm pull station inoperable.

INTERVAL After

PROCEDURE

FIRE Inspect box and pull handles for damage. DETECTION, Document all defects and discrepancies, SUPPRESSION, and refer to Field Maintenance. AND ALARM SYSTEMS Fire Alarm Pull System

FIRE ALARM PULL STATION

BOX HANDLE

PULL

DOWN

I0035T73

Figure 35. 60 After 3.0

Fire Detection, Suppression, and Alarm Systems. Damage or condition that makes the detector inoperable.

Thermal Heat Inspect thermal heat detectors and Detectors and ionization smoke detectors for damage. Ionization Smoke Detectors

IONIZATION SMOKE DETECTOR

THERMAL HEAT DETECTOR

I0036T73

Figure 36.

Fire Detection, Suppression, and Alarm Systems.

0137-36

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 61

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 2.0 ITEM TO BE CHECKED OR SERVICED FIRE STATIONS Hose and Connection EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

WARNING
During inspections, immediately report any defects to your supervisor and correct without delay, or refer to field maintenance. a. Inspect the fire hose in the hose rack for tears, fraying, or cuts. b. Check hose connections for tightness. Hose is unserviceable. Connections will not attach properly.

62

After

0.7

Nozzle

Check nozzle and nozzle handle for proper Nozzle is unserviceable. operation.

HOSE RACK NOZZLE

FIRE HOSE

I0037T73

Figure 37. Fire Stations.

0137-37

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 63

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PORTABLE FIRE EXTINGUISHERS EQUIPMENT NOT READY/ AVAILABLE IF: Extinguisher discharged or damaged.

INTERVAL After

PROCEDURE a. Inspect for tight mounting, full charge, corroded nozzles, and closed valves. b. Verify that certification information is correct and that the seals have not been tampered with. Direct particular attention to extinguisher lines and nozzles in the engine room, checking damage.

Extinguisher is damaged, the seal is broken, and/or the certification is out of date.

LINE

NOZZLE

PORTABLE FIRE EXTINGUISHER

I0038T73

Figure 38. Portable Fire Extinguishers.

0137-38

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 64

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 20.0 ITEM TO BE CHECKED OR SERVICED ENTIRE VESSEL GENERAL VESSEL CLEANLINESS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Inspect glass, frames, and brackets for damage. Clean all windows, vents and ports, and inspect the entire vessel for cleanliness.

65

Weekly

0.5

LIFE LINES AND Ensure that life lines are in good condition, STANCHIONS and are secured in place. Visually inspect Life Lines and safety chains for wear and corrosion. Stanchions Safety Chains Ensure that safety chains are utilized where required.

66

Weekly

0.2

LIFE LINE SAFETY CHAINS

WINDOWS STANCHIONS

US ARMY LT - 803

18 17 16 15 14 13

15 14 13 12 11 10 9

I0039T73

Figure 39. Safety Chains.

0137-39

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 67

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED LIFE RINGS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Inspect for damage and proper marking. Check that the marker light functions when the casing is turned upright.

HULL MARKING

US

AV

MARKER LIGHT

LT

803
HULL MARKING

I0040T73

Figure 40. Life Rings.

0137-40

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 68

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED FIRE DETECTION, SUPPRESSION AND ALARM SYSTEMS Fire Alarm Pull Station EQUIPMENT NOT READY/ AVAILABLE IF: Damage or condition exists fire alarm pull station inoperable.

INTERVAL Weekly

PROCEDURE Inspect box and pull handles for damage. Document all defects and discrepancies, and refer to Field Maintenance.

FIRE ALARM PULL STATION

BOX HANDLE

PULL

DOWN

I0041T73

Figure 41. Fire Alarm Pull System.

0137-41

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 69

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PORTABLE FIRE EXTINGUISHERS EQUIPMENT NOT READY/ AVAILABLE IF: Extinguisher discharged or damaged.

INTERVAL Weekly

PROCEDURE a. Inspect for tight mounting, full charge, corroded nozzles, and closed valves. b. Verify that certification information is correct and that the seals have not been tampered with. Direct particular attention to extinguisher lines and nozzles in the engine room, checking damage.

Extinguisher is damaged, the seal is broken, and/or the certification is out of date.

LINE

NOZZLE

PORTABLE FIRE EXTINGUISHER

I0042T73

Figure 42. Portable Fire Extinguishers.

0137-42

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 70

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

WATERTIGHT Inspect for proper installation, and check for DOORS missing and/or defective fasteners. Overall Condition Gaskets Check to ensure that the gaskets properly seal. Perform chalk test. Chalk mark the knife edge. Wipe gasket clean and close the watertight door. Watertight integrity or operational capability is impaired.

71

Weekly

1.5

GASKET WATERTIGHT DOOR LUBRICATION POINT

KNIFE EDGE

DOGS

LUBRICATION POINT
I0309T73

Figure 43. Watertight Doors.

0137-43

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 72 73

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 0.5 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly Weekly

PROCEDURE

MANHOLES Inspect for proper installation, and check for Overall Condition missing and/or defective fasteners. Gaskets Check to ensure that the gaskets properly seal. Watertight integrity or operational capability is impaired.

MANHOLE

I0310T73

Figure 44.

Manholes.

0137-44

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 74 75

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 0.5 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly Weekly

PROCEDURE

HATCHES Inspect for proper installation, and check for Overall Condition missing and/or defective fasteners. Gaskets Check to ensure that the gaskets properly seal. Perform chalk test. Chalk mark the knife edge. Wipe the gasket clean and close the hatch. Watertight integrity or operational capability is impaired.

HATCH

GASKET

QUICK ACTING DOG

KNIFE EDGE

I0043T73

Figure 45. Hatches.

0137-45

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 76 77

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 1.0 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly Weekly

PROCEDURE

SCUTTLES Inspect for proper installation, and check for Overall Condition missing and/or defective fasteners. Gaskets Check to ensure that the gaskets properly Watertight integrity or seal. Perform chalk test. Chalk mark knife operational capability is edge. Wipe the gaskets clean and close the impaired. scuttle.

QUICK ACTING DOG

GASKET

KNIFE EDGE

SCUTTLE

I0044T73

Figure 46. Scuttles.

0137-46

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 78

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

WATERTIGHT Inspect for proper installation, and check for WINDOWS missing and/or defective fasteners. (PORTHOLES) Overall Condition Gaskets Check to ensure that the gaskets properly seal. Perform chalk test. Chalk mark the knife edge. Wipe the gasket clean and close the watertight window (porthole). Watertight integrity or operational capability is impaired.

79

Weekly

1.0

GASKET COVER HINGE

DOG

STUD
I0045T73

Figure 47.

Watertight Windows (Portholes).

0137-47

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 80

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED SOUND POWERED TELEPHONES Head Set-Chest Set Wiring Connections Operation EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

Visually inspect head set connections to the Any part of this system chest set for frayed wiring or loose fails to operate. connections.

81

Weekly

2.0

Check the two-way voice capability of each headset. Select another station on the system and conduct a two-way conversation. Transmission and receptions should be clear, undistorted and easily understood.

HEADSET

EAR CUPS MOUTH PIECE PUSHBUTTON WIRING NECK STRAP

CHEST SET JACK PLUG WIRING


Figure 48.
I0046T73

Sound Powered Telephones.

0137-48

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 82

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED Exterior Handsets Wiring Exterior EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Visually inspect the handset and wiring for loose connections. Tighten as necessary. Visually inspect exterior for damage, water accumulation, or dirt buildup. Clean using a soft, clean cloth.

83

Weekly

0.5

EXTERIOR HANDSET

ROTARY SWITCH

HANDSET

WIRING
I0047T73

Figure 49.

Exterior Headsets.

0137-49

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 84

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.3 ITEM TO BE CHECKED OR SERVICED LIFESAVING EQUIPMENT LIFE JACKETS Life Jacket Condition Life Jacket Light and Whistle EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

Inspect jackets for rips, oil stains, broken Life jackets are straps, fiber deterioration, and hull marking unserviceable. of vessel. Ensure a sufficient number onboard for passengers and crew. Check that the chemical light is attached to the life jacket, that the case is not damaged, and that the expiration date has not passed. Check that the whistle is attached and not damaged. Chemical light is missing or case is damaged. Whistle is missing or damaged.

85

Monthly

0.3

CHEMICAL LIGHT

HULL MARKING

WHISTLE STRAPS

STRAPS
I0048T73

Figure 50. Life Jackets.

0137-50

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 86

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 3.0 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: Damage or condition that makes the detector inoperable.

INTERVAL Monthly

PROCEDURE

FIRE Inspect thermal heat detectors and DETECTION, ionization smoke detectors for damage. SUPPRESSION, AND ALARM SYSTEMS Thermal Heat Detectors and Ionization Smoke Detectors

IONIZATION SMOKE DETECTOR

THERMAL HEAT DETECTOR

I0049T73

Figure 51.

Fire Detection, Suppression and Alarm Systems.

0137-51

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 87

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 2.0 ITEM TO BE CHECKED OR SERVICED FIRE STATIONS Hose and Connection EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

WARNING
During inspections, immediately report any defects to your supervisor and correct without delay, or refer to field maintenance. a. Inspect the fire hose in the hose rack for tears, fraying, or cuts. b. check hose connections for tightness. Hose is unserviceable. Connections will not attach properly.

HOSE RACK NOZZLE

FIRE HOSE

I0050T73

Figure 52. Fire Stations.

0137-52

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 88

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.7 ITEM TO BE CHECKED OR SERVICED Nozzle EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

Check nozzle and nozzle handle for proper Nozzle is unserviceable. operation.

HOSE RACK NOZZLE

FIRE HOSE

I0051T73

Figure 53. Nozzle. 89 Monthly 4.0 PORTABLE FIRE EXTINGUISHERS Weight Check Weigh the portable fire extinguishers. Any extinguisher weighs less than the rated weight.

LINE

NOZZLE

PORTABLE FIRE EXTINGUISHER

I0052T73

Figure 54. Portable Fire Extinguishers.

0137-53

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 90

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED INTERCOM SYSTEM Exterior Hardware Rotary Switches EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Visually inspect exterior for damage, water accumulation, or dirt buildup. Clean using a soft cloth. Inspect mounting hardware for tightness. Tighten as necessary. Check mechanical operation of each. Replace any worn or incorrectly operating parts. Check the two-way voice capability of the master station. Select the other stations on the system and conduct a two-way conversation. Transmissions and receptions should be clear, undistorted and easily understood.

91 92

Monthly Monthly

0.3 0.3

Damaged or defective parts.

93

Monthly

0.5

Unit Performance

MOUNTING HARDWARE

INDICATOR LAMPS

OPERATING INSTRUCTIONS REL

CALL

BUSY

PRESS TO RELEASE

PUSHBUTTONS

CONTROL SWITCH

PRESS TO RELEASE

VOLUME
OFF

DIMMER

MIC OR

HANDS FREE MAL

ROTARY SWITCH

HANDSET

PRESS TO TALK

HANDS FREE SWITCH


I0053T73

Figure 55.

Intercom System.

0137-54

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 94

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED Indicator Lamps EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Check all indicator lamps. The CALL lamps at the called station(s) should be lit. The REL lamp at the calling station should be lit. If the called station is busy, the BUSY light should be lit.

95

Monthly

0.3

Control Switches Check the control switches. Vary the position of the dimmer control switch and observe the intensity of the panel illumination. Vary the VOLUME control during reception, and verify that the intensity of received speech is controlled. Hands Free Check the hands free capability by One or more unit operating hands free with another station in malfunctions occur. the system. Lubricate pushbutton switches lightly with silicone compound.

96

Monthly

0.3

97

Monthly

0.3

Pushbuttons

MOUNTING HARDWARE

INDICATOR LAMPS

OPERATING INSTRUCTIONS REL

CALL

BUSY

PRESS TO RELEASE

PUSHBUTTONS

CONTROL SWITCH

PRESS TO RELEASE

VOLUME
OFF

DIMMER

MIC OR

HANDS FREE MAL

ROTARY SWITCH

HANDSET

PRESS TO TALK

HANDS FREE SWITCH


I0054T73

Figure 56.

Pushbuttons.

0137-55

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 98

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED SOUND POWERED TELEPHONES Hardware Rotary Switches EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Inspect mounting hardware for tightness. Tighten as necessary.

99

Monthly

0.5

Check mechanical operation for each rotary switch.

0137-56

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 100

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 2.0 ITEM TO BE CHECKED OR SERVICED Operation EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Check the two-way voice capability of each headset unit. Select other stations and conduct a two-way conversation.

HEADSET

EAR CUPS MOUTH PIECE PUSHBUTTON WIRING NECK STRAP

CHEST SET JACK PLUG WIRING


I0055T73

Figure 57. Sound Powered Telephones.

0137-57

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 101

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 8.0 ITEM TO BE CHECKED OR SERVICED POWER DISTRIBUTION SYSTEM (INCLUDING 24 V DC PANELS) Wiring EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

WARNING

Electrical wiring, panels, and components contain high voltages that can cause severe injury or death.

NOTE
Electrical wiring checks and services consist of visual inspections only. Observe all CAUTION and WARNING labels on electrical equipment. a. Visually inspect all accessible wiring, fuse terminal blocks, and connections. b. Ensure that hardware and connections are securely supported, clean and undamaged. c. Visually inspect cables and wiring insulations. Ensure that insulation is not worn, chafed, or damaged. d. Visually inspect conduits and shielding. Ensure that conduits are securely supported and undamaged. Ensure that all shielding is properly grounded and not frayed. 102 Monthly 5.0 Panels a. Inspect power and lighting panels, Panel is not securely mounted. motor controllers, and other electrical panels for secure mounting. b. Visually inspect panel surfaces for Panel has damage that could affect its operation. damages. 103 Monthly 0.5 Indicators and Ground Detection Interior and Exterior Lighting Check the main and auxiliary switchboards Indicators or ground for proper operation of indicators and detection circuits do not ground detection circuits. operate properly. Inspect lighting fixtures for secure mountings and obvious damage. Ensure that fixtures operate when turned on. Emergency lighting fixtures do not operate when turned on. If any part of this system fails.

104

Monthly

0.5

0137-58

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

INTERIOR LIGHTING

120 V DISTRIBUTION PANEL No. 4 24 V MACHINERY DC DISTRIBUTION PANEL


Figure 58. 105 Monthly 2.0

400 V POWER PANEL No. 1 LOAD CENTER DISTRIBUTION PANEL


I0056T73

Power Distribution System (Including 24 V DC Panels). Check units for unusual noises or excessive If either fan fails to vibration and that intake/exhaust screens operate. are clean and free of debris.

HVAC EQUIPMENT All Supply and Exhaust Fans

EXHAUST FANS

SUPPLY FAN
I0057T73

Figure 59. HVAC Equipment.

0137-59

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 106 107

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 0.3 ITEM TO BE CHECKED OR SERVICED Thermostats Air Conditioner Units EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly Monthly

PROCEDURE Visually check thermostats for signs of wear, dirt buildup, damage, and corrosion. Check units for operation.

If main deck A/C air handler fails to operate.

TO AIR HANDLING UNIT

MAIN AC PLANT THERMOSTAT

THERMOSTAT MOISTURE SIGHT GLASS

OIL LEVEL SIGHT GLASS


I0058T73

Figure 60. Air Conditioner Units.

0137-60

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 108

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED Unit Heaters EQUIPMENT NOT READY/ AVAILABLE IF: Heaters do not operate when turned on.

INTERVAL Monthly

PROCEDURE Check that heater mountings are secure. Check for obvious damage. Ensure that heaters operate when they are turned on.

UNIT HEATER

60

50

40

100

I0059T73

Figure 61. Unit Heaters.

0137-61

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 109

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED PIPING SYSTEMS Drinking Fountains EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Visually inspect fountains for damage or for missing parts. Operate the water valve and observe drain flow.

DRINKING FOUNTAIN

I0060T73

Figure 62. Drinking Fountains.

0137-62

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 110

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

Semi-Annual 2.0

WATERTIGHT Lubricate hinges, dogs, studs, and DOORS operating mechanisms as required with Hinges and Dogs general purpose grease. Refer to Table 2 for lubricant specifications. Gaskets Clean gaskets and lubricate with silicone lubricant as required. Refer to Table 2 for lubricant specifications.

111

Semi-Annual 2.0

GASKET WATERTIGHT DOOR LUBRICATION POINT

KNIFE EDGE

DOGS

LUBRICATION POINT
I0061T73

Figure 63. Watertight Doors.

0137-63

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 112

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

Semi-Annual 2.0

MANHOLES Lubricate hinges, dogs, studs, and Hinges and Dogs operating mechanisms as required with general purpose grease. Refer to Table 2 for lubricant specifications. Gaskets Clean gaskets and lubricate with silicone lubricant as required. Refer to Table 2 for lubricant specifications.

113

Semi-Annual 2.0

MANHOLE

I0062T73

Figure 64.

Manholes.

0137-64

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 114

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

Semi-Annual 2.0

HATCHES Lubricate hinges, dogs, studs, and Hinges and Dogs operating mechanisms as required with general purpose grease. Refer to Table 2 for lubricant specifications. Gaskets Clean gaskets and lubricate with silicone lubricant as required. Refer to Table 2 for lubricant specifications.

115

Semi-Annual 2.0

HATCH

GASKET

QUICK ACTING DOG

KNIFE EDGE

I0063T73

Figure 65. Hatches.

0137-65

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 116

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

Semi-Annual 2.0

SCUTTLES Lubricate hinges, dogs, studs, and Hinges and Dogs operating mechanisms as required with general purpose grease. Refer to Table 2 for lubricant specifications. Gaskets Clean gaskets and lubricate with silicone lubricant as required. Refer to Table 2 for lubricant specifications.

117

Semi-Annual 2.0

QUICK ACTING DOG GASKET KNIFE EDGE

SCUTTLE

I0064T73

Figure 66. Scuttles.

0137-66

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 118

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED WATERTIGHT WINDOWS (PORTHOLES) Hinges and Dogs Gaskets EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE Lubricate hinges, dogs, studs, and operating mechanisms as required with general purpose grease. Refer to Table 2 for lubricant specifications. Clean gaskets and lubricate with silicone lubricant as required. Refer to Table 2 for lubricant specifications.

Semi-Annual 2.0

119

Semi-Annual 2.0

GASKET COVER HINGE

DOG

STUD
Figure 67.

I0065T73

Watertight Windows (Portholes).

0137-67

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 120

0137

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 8.0 ITEM TO BE CHECKED OR SERVICED FIRE STATIONS Fire Hose EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Annual

PROCEDURE

WARNING
During inspections, immediately report any defects to your supervisor and correct without delay, or refer to field maintenance. Conduct hydrostatic pressure test (FM 55-502). Any hose fails.

HOSE RACK NOZZLE

FIRE HOSE

I0066T73

Figure 68. Fire Stations. 121 Annual 4.0 Portable Fire Extinguishers Turn in all portable fire extinguishers for certification or exchange. Any portable fire extinguisher certification is expired.

0137-68

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4

0137

Table 2. Item Watertight Door Hinges and Dogs Watertight Door Gaskets Watertight Hatch Hinges and Dogs Watertight Hatch Gaskets Scuttle Hinges and Dogs Scuttle Gaskets Method Pressure Brush Pressure Brush Pressure Brush

Lubricant (Grease) Types. Military Specification (NSN) MIL-PRF-24139 Frequency of Application Semi-Annual Semi-Annual MIL-PRF-24139 Semi-Annual Semi-Annual MIL-PRF-24139 Semi-Annual Semi-Annual MIL-PRF-24139 Semi-Annual Semi-Annual MIL-PRF-24139 Semi-Annual

Lubricant Grease, General Purpose Silicone Lubricant Grease, General Purpose Silicone Lubricant Grease, General Purpose Silicone Lubricant Grease, General Purpose Silicone Lubricant Grease, General Purpose Silicone Lubricant

Manhole Hinges and Pressure Dogs Manhole Gaskets Watertight Windows (Portholes) Hinges and Dogs Watertight Windows (Portholes) Gaskets END OF TASK END OF WORK PACKAGE Brush Pressure

Brush

Semi-Annual

0137-69/70 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00002)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION ENGINE ROOM

0138

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts Lubricating Oil, Engine (WP 0165, Table 1, Item 108) Personnel Required N/A References Volume 3, WP 0069 Volume 3, WP 0073 Equipment Condition N/A

0138-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 2.0 ITEM TO BE CHECKED OR SERVICED ENGINE ROOM AND INTERIOR STRUCTURES EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING
Operate the ventilators to ensure that hull compartments and engine room are clear of fuel fumes. Operate the blowers for at least 5 minutes before starting any engine. Failure to comply can result in injury or death. Inspect the engine room and interior structures for leaks. Engine room is taking on water or Class III leaks.

Before

1.0

LUBE OIL PURIFIER

a. Inspect the lubricating oil purifier for secure mountings and loose hardware.

CAUTION
During operation, oil level must not be below 1/2 full in sight glass or damage will result. b. Check that the oil level in the sight glass is at lease 2/3 full before operating. Add oil (OE/HDO-30) as required through the fill cap.

LUBE OIL PURIFIER

FILL CAP

DRAIN PLUG

GEAR OIL LEVEL SIGHTGLASS


I0067T73

Figure 1. Lube Oil Purifier.

0138-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 3

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED TANK LEVEL INDICATOR (TLI) PANEL AND RECEIVERS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Observe level at remote indicator. Compare reading with receiver panel in Enclosed Operating Space (EOS). Report any differences to Field Maintenance.

TLI REMOTE INDICATOR

I0068T73

Figure 2.

Tank Level Indicator (TLI) Panel and Receivers.

0138-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 4

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.9 ITEM TO BE CHECKED OR SERVICED LUBE OIL TRANSFER PUMP EQUIPMENT NOT READY/ AVAILABLE IF: Pump is damaged.

INTERVAL Before

PROCEDURE a. Visually inspect pump for leaks, loose connections, and damage. b. Check strainers for obstructions. c. Grease two motor fittings with 1 to 2 strokes of general purpose grease. d. Grease single pump fitting with 1 to 2 strokes of general purpose grease.

Before

2.0

LUBE OIL Visually inspect manifold for cracks, leaks, Class III leaks or lose MANIFOLD AND and secure mounting. Visually inspect all mounting. PIPING lube oil system piping for leaks and damage.

LUBE OIL TRANSFER PUMP DIFFERENTIAL PRESSURE

LUBE OIL TRANSFER PUMP DISCHARGE PRESSURE GAGE

LUBE OIL MANIFOLD AND PIPING STRAINER PIPING

PUMP

COUPLING

LUBE OIL TRANSFER PUMP

GREASE FITTING

ELECTRIC MOTOR
I0069T73

Figure 3.

Lube Oil Manifold and Piping.

0138-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 6

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED SHIP'S SERVICE DIESEL GENERATORS (SSDG) Expansion Tank EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Check the engine and generator for debris, foreign objects, leaks, loose or broken fittings, guards, and components.

Before

0.2

Check coolant level at the expansion tank sight glass. Coolant level should be at or above the 1/2 full level. Inspect tank cap for signs of leakage. Check that the indicator is in the GREEN range.

Class III leaks

8 9 10

Before Before Before

0.1 0.2 0.2

Tank Cap Air Cleaner Indicator

Class III leaks Indicator is in the RED range.

Oil Level (Engine With engine off, check oil dipstick. Oil level Off) should be between the ADD and FULL marks on the dipstick. Add oil as required (OE/HDO-30). Fuel Filter/Water Separators a. Drain the engine fuel filter/water separator by opening the drain fitting and permitting the accumulated water and sediment drain into a suitable drain pan. b. Check that the filter restriction gages are in the GREEN range. Reading in the RED range.

11

Before

0.4

AMMETER (SSDG 1 ONLY) COOLANT TEMPERATURE GAGE

SIGHT GLASS EXPANSION TANK

OIL PRESSURE GAGE SHIPS SERVICE DIESEL GENERATOR COOLANT TANK CAP

FUEL PRESSURE GAGE FILTER RESTRICTION GAGE FUEL FILTER WATER SEPARATOR

AIR START OILER (SSDG 2 ONLY)

DRAIN FITTING OIL DIPSTICK


I0070T73

Figure 4.

Fuel Filter/Water Separators.

0138-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 12

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED Gages EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

a. Check the condition of all the gages. Damaged or missing gages b. Check that the fuel pressure gage Reading in the RED range reads in the GREEN range. c. Check that the water temperature Reading above the GREEN range gage reads in the GREEN range.

13

Before

0.2

Air Start Oiler (SSDG 2 Only)

Check that the air start oiler is at least 1/2 full. Add oil (OE/HDO-10) as required.

AMMETER (SSDG 1 ONLY) COOLANT TEMPERATURE GAGE

SIGHT GLASS EXPANSION TANK

OIL PRESSURE GAGE SHIPS SERVICE DIESEL GENERATOR COOLANT TANK CAP

FUEL PRESSURE GAGE FILTER RESTRICTION GAGE FUEL FILTER WATER SEPARATOR

AIR START OILER (SSDG 2 ONLY)

DRAIN FITTING OIL DIPSTICK


I0070T73

Figure 5.

Air Start Oiler (SSDG 2 Only).

0138-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 14

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED SEWAGE DISCHARGE PUMPS Piping and Valves Motor Lubricate EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks

INTERVAL Before

PROCEDURE Visually inspect pump for leaks, loose connections and damage. Inspect piping and valves for leaks. Inspect motor for proper mounting and for exposed or frayed wiring. Grease pump fitting with 1 to 2 strokes of general purpose grease.

15 16 17

Before Before Before

0.5 0.5 0.5

Class III Leaks Pump or wiring damaged.

GREASE FITTING

SEWAGE DISCHARGE PIPING SEWAGE DISCHARGE PUMP

SEWAGE INLET PIPING


I0071T73

VALVE

Figure 6. Sewage Discharge Pumps. 18 19 20 Before Before Before 0.2 0.2 0.4 CONTROL AIR DRYER CONTROL AIR RECEIVER REDUCTION GEARS Oil Level Check dryer for loose connections and damage. Check receiver for loose connections and damage. Oil level should be between ADD and FULL. Add oil (OE/HDO-40) as required. Oil level below ADD or above FULL.

0138-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 21

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED SHAFT BRAKE Air Pressure Gage EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

NOTE
This gage is located inside No. 2 SHAFT BRAKE PANEL. The air compressor must be online (Volume 3, WP 0069) prior to this check. Air pressure gage should read 100 to 125 PSI (6.9 to 8.6 bar).

22

Before

0.5

Shaft Brake Operation

Inspect shaft brake for proper operation. Engage and disengage the shaft brake at the shaft brake panel.

Brake inoperative

SHAFT BRAKE ACTUATOR

SHAFT BRAKE PANEL

REDUCTION GEAR

No. 2 Shaft Brake Panel

DIPSTICK

I0072T73

Figure 7.

Shaft Brake.

0138-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 23

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.4 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

LUBE OIL HAND Inspect the pump for leaks, loose PUMP connections and damage.

LUBE OIL HAND LAMP

I0073T73

Figure 8. Lube Oil Hand Pump.

0138-9

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 24

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 2.0 ITEM TO BE CHECKED OR SERVICED MAIN PROPULSION ENGINES EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE a. Check the engine for debris, foreign objects, and loose or broken fittings. b. Inspect engine, fuel injection pumps, and cooling pumps for loose or damaged connections or mountings. c. Inspect fluid lines and joints for leaks. d. Check that the oil level in air line lubricator is over 1/2 full. Add oil (OE/ HDO-10) as required. e. Check the oil level. Oil level should be between the LOW and FULL marks. Add oil (MOBILGARD 450) as required.

Class III leaks

AIR BOX DRAIN

HANDHOLE COVERS

CYLINDER TEST VALVE

DIPSTICK

AIR LINE LUBRICATOR


I0074T73

Figure 9. Main Propulsion Engines. f. Press the CONTROL POWER ON switch and verify that ENGINE RPM reads 000. g. Press ALARM TEST switch and verify that the siren sounds, the blue rotating beacon is activated and the following warning lights are illuminated: LUBE OIL PRESSURE Any warning light is not illuminated, siren does not sound, or blue rotating beacon does not activate.

0138-10

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE LUBE OIL LEVEL OVERSPEED TRIPPED LOW TURBO OIL PRESSURE CRANKCASE PRESSURE WATER LEVEL HOT ENGINE HIGH OIL TEMPERATURE

NOTE
The air compressor must be online (Volume 3, WP 0069) prior to this check. h. Check that the starting air pressure gage reads 125 PSI (8.62 bar).

FUEL OIL PRESSURE LUBE OIL PRESSURE

TACHOMETER HOURMETER STARTING AIR PRESSURE START


ENGINE RPM

PYROMETER
LUBE OIL FUEL OIL START AIR

TOTAL HOURS

ELECTRO-MOTIVE DIVISION
La Grange Illinios U.S.A.

GM ELECTRO-MOTIVE POWER

DATE

IMMERSION HEATER ON IMMERSION HEATER OFF

ENGINE START ENGINE STOP

CONTROL POWER

MODEL

SERIAL NO.

ON

O F F

ANNUNCIATOR
TOTAL SOUND

ENGINE RPM

HIGH OIL TEMPERATURE ENGINE AIR FILTER


ANNUNCIATOR

HOT ENGINE LOW START AIR

CRANKCASE PRESSURE LOW CLUTCH AIR WATER LEVEL

OVERSPEED TRIPPED LOW TURBO OIL PRESSURE LOW FUEL PRESSURE *

LUBE OIL PRESSURE LUBE OIL LEVEL CIRCULATE OIL PRESSURE *

LOW OIL START TEMPERATURE FAILURE * *

CONTROL POWER ON SWITCH WARNING LIGHTS


Figure 10.
I0075T73

Main Engine Control Panel (Starboard or Port). i. Check the governor oil level in sight glass. Governor oil (OE/HDO-10) level should be at least 1/2 full in sight glass. Add oil through the oil fill cap as required. j. Check the cooling system coolant level at the expansion tank. Add coolant as required (50/50 mix of antifreeze and water). k. Check the fuel oil system for leaks. Class III leaks

0138-11

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: Air filter indicator is in the RED range

INTERVAL

PROCEDURE l. Check engine that the air filter indicator is in the GREEN range.

OIL FILLER CAP

OIL LEVEL SIGHT GLASS

I0076T73

Figure 11. Governor.

FILLER CAP

FULL

FULL

S T O P

CAUTION: REMOVE CAP SLOWLY DO NOT OVERFILL.


LOW

R U N

LOW

SIGHT GLASS
I0077T73

EXPANSION TANK

Figure 12.

Main Engine Coolant Expansion Tank.

0138-12

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

MAIN ENGINE AIR FILTER HOUSING

AIR FILTER RESTRICTION GAGE

I0078T73

Figure 13. Main Engine Air Filter. 25 Before 0.4 PRELUBE PUMPS Inspect pump for leaks, loose connections, Pump is defective. and damage. Service as necessary.

ELECTRIC MOTOR COUPLING PRELUBE PUMP

I0079T73

Figure 14. Prelube Pumps.

0138-13

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 26

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.9 ITEM TO BE CHECKED OR SERVICED FUEL OIL TRANSFER PUMPS EQUIPMENT NOT READY/ AVAILABLE IF: Pumps are defective

INTERVAL Before

PROCEDURE a. Visually inspect pumps for leaks, loose connections, and damage. b. Grease two motor fittings with 1 to 2 strokes of general purpose grease. c. Grease pump fitting with 1 to 2 strokes of general purpose grease.

FUEL OIL TRANSFER PUMP

COUPLING ELECTRIC MOTOR

GREASE FITTING GREASE FITTINGS


I0080T73

Figure 15.

Fuel Oil Transfer Pumps.

0138-14

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 27

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED FUEL FILTER/ WATER SEPARATOR Exterior EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks.

INTERVAL Before

PROCEDURE Visually inspect exterior for obvious damage or leaks.

FILTER RESTRICTION GAGE

15 10 5 0 30 20 25 10 5 0

15 20 25 10 5 0

15 20 25 10 5 0

15 20 25

30

30

30

FUEL FILTER/ WATER SEPARATION

DRAIN FITTING
Figure 16.

I0081T73

Fuel Filter/Water Separator

0138-15

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 28

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED Sump EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING
Diesel fuel is flammable and diesel fuel vapors can be explosive. Make sure all work is performed in a well ventilated area. Keep sparks, open flame, and excessive heat away from the work area. Failure to comply with this precaution can result in death or serious injury. Check for water and/or solid contaminants in the bowl. Drain the bowl by opening the drain fitting and allowing water and contaminants to drain into a suitable drain pan.

FILTER RESTRICTION GAGE

15 10 5 0 30 20 25 10 5 0

15 20 25 10 5 0

15 20 25 10 5 0

15 20 25

30

30

30

FUEL FILTER/ WATER SEPARATION

DRAIN FITTING

I0081T73

Figure 17. Sump.

0138-16

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 29

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED FUEL OIL DAY TANKS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE a. Check the amount of fuel in the day tanks. Sound the day tanks and compare the reading to the level indicated on the tank indicator. b. Check for any evidence of fuel leakage. c. Transfer fuel (Volume 3, WP 0073) as necessary to top off the tanks.

Any fuel leakage

30

Before

2.0

FUEL OIL SYSTEM

Visually inspect the fuel oil manifold, valves Any fuel leaks or and piping for cracks, leaks, and secure unserviceable mounting. mounting.

FUEL OIL TANK LEVEL INDICATORS

FUEL OIL MANIFOLD

I0082T73

Figure 18.

Fuel Oil System.

0138-17

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 31

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 3.0 ITEM TO BE CHECKED OR SERVICED OIL BILGE SYSTEM EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

a. Visually inspect the oily bilge pump Class III leaks. for leaks, loose connections and damage. Inspect the air filter. b. Visually inspect all piping and valves for leaks, loose connection and damage. Class III leaks, or unserviceable condition.

c. Visually inspect the oily waste drain Class III leaks, or unserviceable condition. and storage tank for leaks, loose connections, and damage. d. Check TLI and record level.

OILY BILGE PUMP

STRAINERS
I0083T73

Figure 19.

Oily Bilge System.

0138-18

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 32

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED BATTERY CHARGERS (SSDG 1, MACHINERY DC CONTROL, ROWPU) EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE a. At 120 V emergency distribution panel No.1, turn ON the SSDG No. 1 BATTERY CHARGER, and MACHINERY DC CONTROL BATTERY CHARGER, circuit breakers. b. At 120 V distribution panel No. 4, turn ON the ROWPU BATTERY CHARGER, circuit breaker. c. Check battery chargers for proper connections to battery.

NOTE
A high reading indicates that the batteries are weak and are being recharged or that one or more batteries are unserviceable. d. Check the ammeter reading. The Unit fails to operate and recharge the batteries ammeter should read near 0 for a trickle charge. If the reading is above 3 A, refer to Field Maintenance.

AMMETER

BATTERY CHARGER

I0084T73

Figure 20. Battery Chargers.

0138-19

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 33

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED BATTERY BOX EQUIPMENT NOT READY/ AVAILABLE IF: Batteries not secured for operation

INTERVAL Before

PROCEDURE Visually inspect battery box for obvious damage. Ensure that the vent is not obstructed.

WING NUTS

BATTERY BOX COVER

BATTERY BOX
Figure 21. 34 Before 1.0 Batteries

I0085T73

Battery Box.

WARNING
Do not smoke when observing battery electrolyte level. Batteries give off fumes that can explode. Electrolyte is an acid and can cause personal injury if it contacts skin or eyes. Wear approved goggles, gloves, and apron.

NOTE
Top cover of battery box must be removed to check batteries. a. Inspect batteries, terminals, connections, cables and vent caps for cleanliness and tightness. b. Clean or tighten terminal connections as required. c. Clean battery as required using a paste of baking soda and clear water. Rinse with clear water when finished. d. Check Electrolyte level and check specific gravity of electrolyte with a hydrometer. Electrolyte level should be at the bottom of the split rings and specific gravity should be 1.265. Connections badly damaged or excessively loose

0138-20

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

CABLE TERMINAL CONNECTION NEGATIVE TERMINAL

TERMINAL CONNECTION

CABLE

POSITIVE TERMINAL

VENT CAPS BATTERIES


I0086T73

Figure 22. Batteries.

0138-21

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 35

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 2.0 ITEM TO BE CHECKED OR SERVICED ENGINE ROOM AND INTERIOR STRUCTURES EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

WARNING
Operate the ventilators to ensure that hull compartments and engine room are clear of fuel fumes. Operate the blowers for at least 5 minutes before starting any engine. Failure to comply can result in injury or death. Inspect the engine room and interior structures for leaks. Engine room is taking on water or Class III leaks

36

During

1.0

LUBE OIL PURIFIER

a. Inspect the lubricating oil purifier for secure mountings and loose fasteners.

CAUTION
During operation, oil level must not be below 1/2 full in sight glass or damage will result. b. Ensure that the oil level in the sight glass remains at least 1/2 full during operation. Add oil (OE/HDO-30) as required through the fill cap.

LUBE OIL PURIFIER

FILL CAP DRAIN PLUG GEAR OIL LEVEL SIGHTGLASS


I0087T73

Figure 23.

Lube Oil Purifier.

0138-22

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 37

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED TANK LEVEL INDICATOR (TLI) PANEL AND RECEIVERS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE Observe level at remote indicator. Compare reading with panel in EOS. Report any differences to Field Maintenance.

TLI REMOTE INDICATOR

I0088T73

Figure 24. Tank Level Indicator (TLI) Panel and Receivers.

0138-23

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 38

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED LUBE OIL TRANSFER PUMP EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks

INTERVAL During

PROCEDURE a. Visually inspect pumps for leaks, loose connections, and damage. b. Check gages for normal readings (30 PSI [2.07 bar]). c. Grease two motor fittings with 1 to 2 strokes of general purpose grease. d. Grease pump fitting with 1 to 2 strokes of general purpose grease.

39

During

2.0

LUBE OIL Visually inspect manifold for cracks, leaks, Class III leaks or loose MANIFOLD AND and secure mounting. Visually inspect all mounting PIPING lube oil system piping for leaks and damage.

LUBE OIL TRANSFER PUMP DIFFERENTIAL PRESSURE

LUBE OIL TRANSFER PUMP DISCHARGE PRESSURE GAGE

STRAINER PIPING

LUBE OIL MANIFOLD AND PIPING

PUMP COUPLING

LUBE OIL TRANSFER PUMP

ELECTRIC MOTOR GREASE FITTING


I0089T73

Figure 25.

Lube Oil Manifold and Piping,

0138-24

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 40

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.4 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

SHIPS SERVICE a. With engine running, check oil level DIESEL on the dipstick. Oil level should be between GENERATORS the ADD and FULL marks on the dipstick. Add oil (MIL-PRF-2104) as required. b. Check the fuel pressure gage. The Reading in RED range gage should read in the GREEN range. c. Check the oil pressure gage. The gage should read in the GREEN range. d. Check for unusual noises. Reading in the RED range Unusual noises are heard

e. Check for fuel, oil, or coolant leaks. Class III leaks

AMMETER (SSDG 1 ONLY) COOLANT TEMPERATURE GAGE

SIGHT GLASS

OIL PRESSURE GAGE SHIPS SERVICE DIESEL GENERATOR COOLANT TANK CAP

EXPANSION TANK

FUEL PRESSURE GAGE FILTER RESTRICTION GAGE FUEL FILTER WATER SEPARATOR

AIR START OILER (SSDG 2 ONLY)

DRAIN FITTING OIL DIPSTICK


I0090T73

Figure 26.

Ships Service Diesel Generators.

0138-25

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 41

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: Meter is inoperative

INTERVAL During

PROCEDURE

Main The meter should read 60 Hz. Switchboard in EOS (SSDG 1 or SSDG 2 operating) Hertz Meters AC Ammeters AC V Meters AC W Meter Check that meter reading is free and proportional. The meter should read 440 V 5 V. Check that meter reading is free and proportional.

42 43 44

During During During

0.2 0.2 0.2

Meter is inoperative Meter is inoperative Meter is inoperative

MAIN SWITCHBOARD AC AMMETER AC AMMETER AC VOLTS HERTZ HERTZ AC VOLTS METER METER METER METER AC WATT AC WATT METER METER

I0091T73

Figure 27.

Main Switchboard.

0138-26

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 45

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED SEWAGE DISCHARGE PUMPS Piping and Valves Motor EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks

INTERVAL During

PROCEDURE Visually inspect for leaks, loose connections and damage, and service as necessary. Inspect piping and valves. Inspect motor for any unserviceable condition.

46 47

During During

0.5 0.5

Class III leaks Pump inoperative.

GREASE FITTING

SEWAGE DISCHARGE PIPING SEWAGE DISCHARGE PUMP

SEWAGE INLET PIPING VALVE


I0092T73

Figure 28. Sewage Discharge Pumps 48 49 During During 0.2 0.2 CONTROL AIR DRYER CONTROL AIR RECEIVER Check dryer for loose connections and damage. Check receiver for loose connections and damage.

0138-27

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 50

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED REDUCTION GEARS Oil Level Gages and Noise EQUIPMENT NOT READY/ AVAILABLE IF: Oil level below ADD or above FULL

INTERVAL During

PROCEDURE Oil level should be between ADD and FULL. Add oil (OE/HDO-40) as required.

51

During

0.2

NOTE
The gage is located inside No. 2 SHAFT BRAKE PANEL a. Shaft brake pressure gage should read 1,200 to 1,500 PSI (83 to 103 bar).

NOTE
The gage is located inside No. 2 SHAFT BRAKE PANEL b. Air pressure gage should read 100 to 125 PSI (6.9 to 8.6 bar).

SHAFT BRAKE ACTUATOR

REDUCTION GEAR

No. 2 Shaft Brake Panel

SHAFT BRAKE PANEL

DIPSTICK

I0093T73

Figure 29.

Reduction Gears.

c. Lube oil pressure gage should read Reading below 350 PSI (24.1) at least 350 PSI (24.1 bar) d. Oil temperature gage should read Reading not in range 120 to 150F (48.9 to 65.6C). Reading not in range e. Clutch oil pressure gage should read 170 to 175 PSI (11.72 to 12.07 bar) with clutch disengaged and 350 to 360 PSI (24.12 to 24.82 bar) with clutch engaged.

0138-28

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

Excessive vibration or f. Observe reduction gear for excessive vibration or unusual noise during unusual noise. operation.

REDUCTION GEAR AIR PRESSURE GAGE

25 30 35 20 15 10 5 0 60 40 45 50 55

25 30 35 20 15 10 5 0 60 40 45 50 55

25 30 35 20 15 10 5 0 60 40 45 50 55

REDUCTION GEAR

REDUCTION GEAR LUBE OIL PRESSURE AND TEMPERATURE GAGES


I0094T73

Figure 30.

Reduction Gear Gages.

0138-29

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 52

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

LUBE OIL HAND Inspect the pump for leaks, loose PUMP connections and damage.

LUBE OIL HAND LAMP

I0095T73

Figure 31.

Lube Oil Hand Pump.

0138-30

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 53

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 2.0 ITEM TO BE CHECKED OR SERVICED MAIN PROPULSION ENGINES EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE a. Inspect engine, fuel system, and cooling system for loose or damaged connections or mountings. b. Inspect fluid lines and joints for leaks. c. Check the governor oil level in sight glass. Governor oil level should be at least 1/2 full in sight glass. Add oil (OE/HDO-10) as required. d. Check the oil level with the engine at idle speed and the engine HOT. Oil level should be between the LOW and FULL marks. Add oil (MOBILGARD 450) as required.

Class III leaks

e. Check the cooling system coolant Class III leaks level at the expansion tank. Add coolant (50/50 mix of antifreeze and water) as required.

OIL FILLER CAP

OIL LEVEL SIGHT GLASS

I0096T73

Figure 32. Governor.

0138-31

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

FILLER CAP

FULL

FULL

S T O P

CAUTION: REMOVE CAP SLOWLY DO NOT OVERFILL.


LOW

R U N

LOW

SIGHT GLASS
I0097T73

EXPANSION TANK

Figure 33.

Expansion Tank.

AIR BOX DRAIN

HANDHOLE COVERS

CYLINDER TEST VALVE

DIPSTICK

AIR LINE LUBRICATOR


Figure 34. Soak Back Pump.

I0098T73

Tachometer is inoperative f. The tachometers on the control panel and at the remote stations should all read the same.

0138-32

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

g. The control panel should not display Any warning light is illuminated any warning lights. h. Check that lube oil pressure is not Oil pressure is less than 30 lower than 30 PSI (2.1 bar) at rated speed PSI (2.1 bar) at rated and not less than 14 PSI (0.9 bar) at idle. speed or 14 PSI (0.9 bar) at idle i. Check that the fuel oil pressure gage Fuel pressure less than 35 PSI (2.4 bar) or more than is between 35 to 50 PSI (2.4 to 3.5 bar). 50 PSI (3.5 bar) j. Check pyrometer for proper indication of temperature for the operating range of engine speed and load. k. Check that the air filter indicator is Air filter indicator is in the RED range in the GREEN range. l. Check that the engine hour meter is operating.

TACHOMETER FUEL OIL STARTING AIR PRESSURE PRESSURE LUBE OIL PRESSURE
ENGINE RPM

HOURMETER

START
TOTAL HOURS

PYROMETER
LUBE OIL FUEL OIL START AIR

ELECTRO-MOTIVE DIVISION
La Grange Illinios U.S.A.

GM ELECTRO-MOTIVE POWER

DATE

IMMERSION HEATER ON IMMERSION HEATER OFF

ENGINE START ENGINE STOP

CONTROL POWER

MODEL

SERIAL NO.

ON

O F F

ANNUNCIATOR
TOTAL SOUND

ENGINE RPM

HIGH OIL TEMPERATURE ENGINE AIR FILTER


ANNUNCIATOR

HOT ENGINE LOW START * AIR

CRANKCASE PRESSURE LOW CLUTCH * AIR WATER LEVEL

OVERSPEED TRIPPED LOW TURBO OIL PRESSURE LOW FUEL PRESSURE *

LUBE OIL PRESSURE LUBE OIL LEVEL CIRCULATE OIL PRESSURE *

LOW OIL START TEMPERATURE FAILURE * *

WARNING LIGHTS
Figure 35. 54 55 During During 0.2 0.2 Main Engine Control Panel (Starboard or Port).

CONTROL POWER ON SWITCH


I0099T73

Cylinder Test Valves

Check cylinder test valves for leakage, and An exhaust gas leak tighten if required. exists.

Handhole Covers Check handhole covers for leakage, and tighten if required.

0138-33

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 56

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Air Box Drains EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

NOTE
If air box drains are kept closed, drain after every 4 hours of operation. Check air box drains for proper operation and clean if necessary. Drains do not operate. Any unusual noise or sound.

57

During

0.2

Unusual Sounds

Check for unusual noises or sounds.

AIR BOX DRAIN

HANDHOLE COVERS

CYLINDER TEST VALVE

DIPSTICK

AIR LINE LUBRICATOR


Figure 36. Soak Back Pump.

I0100T73

0138-34

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 58

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PRELUBE PUMP EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

Inspect pump for leaks, loose connections, Pump is defective. and damage.

ELECTRIC MOTOR

COUPLING PRELUBE PUMP

I0101T73

Figure 37. Prelube Pump.

0138-35

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 59

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED PROPELLER SHAFTS EQUIPMENT NOT READY/ AVAILABLE IF: Shaft is misaligned or bent, or bearing is excessively worn. Class III leaks.

INTERVAL During

PROCEDURE Check for unusual vibrations. Visually inspect for leaks, loose connections, and damage.

60

During

1.0

REDUCTION Inspect reduction gear cooling pump for GEAR COOLING leaks, loose connections or loose PUMPS hardware. Check gages for a normal reading of approximately 30 PSI (2.1 bar).

STARBOARD REDUCTION GEAR

ELECTRIC MOTOR

ELECTRIC MOTOR

REDUCTION GEAR COOLING PUMPS


Figure 38.

I0102T73

Reduction Gear Cooling Pumps.

0138-36

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 61

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED FUEL OIL DAY TANKS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE a. Check the amount of fuel in the day tanks. Sound the day tanks and compare the reading to the level indicated on the TLI. b. Check for any evidence of fuel leakage. c. Transfer fuel (Volume 3, WP 0073) as necessary to top off the tanks.

Any fuel leakage

62

During

2.0

FUEL OIL SYSTEM

Visually inspect the fuel oil manifold, valves Any fuel leaks or and piping for cracks, leaks, and secure unserviceable mounting. mounting.

FUEL OIL TANK LEVEL INDICATORS

FUEL OIL MANIFOLD

I0103T73

Figure 39. Fuel Oil System

0138-37

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 63

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED OILY BILGE SYSTEM Pump Valves and Piping EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

Visually inspect pump for leaks, loose Class III leaks. connections, and damage. Inspect air filter. Visually inspect all piping and valves for leaks, loose connections, and damage. Class III leaks, or unserviceable condition. Class III leaks or unserviceable condition.

64 65

During During

1.0 1.0

Oily Waste Drain Visually inspect the oily waste drain and and Storage storage tank for leaks, loose connections Tank and damage.

OILY BILGE PUMP

STRAINERS
I0104T73

Figure 40.

Oil Bilge System.

0138-38

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 66

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED BATTERY CHARGERS (SSDG 1, MACHINERY DC CONTROL, ROWPU) EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE a. At 120 V emergency distribution panel No. 1, check that the SSDG No. 1 BATTERY CHARGER and MACHINERY DC CONTROL BATTERY CHARGER circuit breaker is set to ON. b. At 120 V distribution panel No. 4, check that the ROWPU BATTERY CHARGER circuit breaker is set to ON. c. Check battery chargers for proper connections to battery.

NOTE
A high reading indicates that the batteries are weak and are being recharged or that one or more batteries are unserviceable. d. Check the ammeter reading. The Unit fails to operate and recharge the batteries ammeter should read near 0 for a trickle charge. If the reading is above 3 A, refer to Field Maintenance.

AMMETER

BATTERY CHARGER

I0105T73

Figure 41. Battery Chargers.

0138-39

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 67

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED LUBE OIL TRANSFER PUMP EQUIPMENT NOT READY/ AVAILABLE IF: Pumps are defective.

INTERVAL After

PROCEDURE Visually inspect pumps for leaks, loose connections, and damage.

LUBE OIL TRANSFER PUMP DIFFERENTIAL PRESSURE

LUBE OIL TRANSFER PUMP DISCHARGE PRESSURE GAGE

STRAINER PIPING

LUBE OIL MANIFOLD AND PIPING

PUMP COUPLING

LUBE OIL TRANSFER PUMP

GREASE FITTING

ELECTRIC MOTOR
I0106T73

Figure 42.

Lube Oil Transfer Pump.

0138-40

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 68

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED SHIPS SERVICE DIESEL GENERATORS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

a. Check for oil, fuel, or coolant leaks. Class III leaks.

b. Check that the air start oiler jar is at least 1/2 full. Refill with oil (OE/HDO-10) as required.

AMMETER (SSDG 1 ONLY) COOLANT TEMPERATURE GAUGE

SIGHT GLASS EXPANSION TANK

OIL PRESSURE GAUGE SHIPS SERVICE DIESEL GENERATOR COOLANT TANK CAP

FUEL PRESSURE GAUGE FILTER RESTRICTION GAUGE FUEL FILTER WATER SEPARATOR

AIR START OILER (SSDG 2 ONLY)

DRAIN FITTING OIL DIPSTICK


I0107T73

Figure 43. Ship's Service Diesel Generators.

0138-41

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 69

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 3.0 ITEM TO BE CHECKED OR SERVICED SEWAGE DISCHARGE PUMPS EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks.

INTERVAL After

PROCEDURE Visually inspect pumps for leaks, loose connections and damage.

GREASE FITTING

SEWAGE DISCHARGE PIPING SEWAGE DISCHARGE PUMP

SEWAGE INLET PIPING VALVE


I0311T73

Figure 44. 70 71 72 After After After 0.2 0.2 0.2 CONTROL AIR DRYER CONTROL AIR RECEIVER MAIN PROPULSION ENGINES

Sewage Discharge Pumps. Check dryer for loose connections and damage. Check receiver for loose connections and damage. a. Inspect engine, fuel system, and cooling system for loose or damaged connections or mountings. b. Inspect fluid lines and joints for leaks. c. Check that the oil level in air line lubricator is over 1/2 full. Add oil (OE/ HDO-10) as required. Class III leaks.

0138-42

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 73

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

Soak Back Pump Verify that the soak back pump operates for Soak back system does 25 minutes when START switch is pushed. not operate.

AIR BOX DRAIN

HANDHOLE COVERS

CYLINDER TEST VALVE

DIPSTICK

AIR LINE LUBRICATOR


Figure 45. Soak Back Pump.

I0108T73

0138-43

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 74

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED PRELUBE PUMP EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

Inspect pump for leaks, loose connections, Pump is defective. and damage.

ELECTRIC MOTOR

COUPLING PRELUBE PUMP

I0109T73

Figure 46. Prelube Pump.

0138-44

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 75

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks.

INTERVAL After

PROCEDURE

REDUCTION Inspect reduction gear cooling pump for GEAR COOLING leaks, loose connections or loose PUMPS hardware.

STARBOARD REDUCTION GEAR

ELECTRIC MOTOR

ELECTRIC MOTOR

REDUCTION GEAR COOLING PUMPS


I0110T73

Figure 47.

Reduction Gear Cooling Pumps.

0138-45

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 76

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED FUEL OIL TRANSFER PUMPS EQUIPMENT NOT READY/ AVAILABLE IF: Pumps are defective.

INTERVAL After

PROCEDURE Visually inspect pumps for leaks, loose connections, and damage.

FUEL OIL TRANSFER PUMP

COUPLING ELECTRIC MOTOR

GREASE FITTING GREASE FITTINGS

I0111T73

Figure 48. Fuel Oil Transfers Pumps. 77 After 0.5 FUEL OIL DAY TANKS a. Check the amount of fuel in the day tanks. Sound the day tanks and compare the reading to the level indicated on the TLI. b. Check for any evidence of fuel leakage. c. Transfer fuel (Volume 3, WP 0073) as necessary to top off the tanks. Any fuel leakage

0138-46

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 78

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED BATTERY CHARGERS (SSDG 1, MACHINERY DC CONTROL, ROWPU) EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE a. At 120 V emergency distribution panel No. 1, check the SSDG No. 1 BATTERY CHARGER and MACHINERY DC CONTROL BATTERY CHARGER circuit breakers are set to ON. b. At 120 V distribution panel No. 4 check the ROWPU BATTERY CHARGER circuit breaker is set to ON. c. Check battery chargers for proper connections to battery.

NOTE
A high reading indicates that the batteries are weak and are being recharged or that one or more batteries are unserviceable. d. Check the ammeter reading. The Unit fails to operate and recharge the batteries ammeter should read near 0 for a trickle charge. If the reading is above 3 A, refer to Field Maintenance.

AMMETER

BATTERY CHARGER

I0112T73

Figure 49. Battery Chargers.

0138-47

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 79

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED BATTERIES EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

WARNING
Do not smoke when observing battery electrolyte level. Batteries give off fumes that can explode. Electrolyte is an acid and can cause personal injury if it contacts skin or eyes. Wear approved goggles, gloves, and apron.

NOTE
Top cover of battery box must be removed to check batteries. a. Inspect batteries, terminals, connections, cables and vent caps for cleanliness and tightness. b. Clean or tighten terminal connections as required. c. Clean battery as required using a paste of baking soda and clean water. Rinse with clean water when finished. d. Check electrolyte level and check specific gravity with a hydrometer. Electrolyte level should be at the bottom of the split rings and specific gravity should be 1.265. Connections badly damaged or excessively loose

0138-48

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

CABLE TERMINAL CONNECTION

TERMINAL CONNECTION

CABLE

NEGATIVE TERMINAL

POSITIVE TERMINAL

VENT CAPS BATTERIES


I0113T73

Figure 50. Batteries.

0138-49

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 80

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 2.0 ITEM TO BE CHECKED OR SERVICED ENGINE ROOM AND INTERIOR STRUCTURES EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

WARNING
Operate the ventilators to ensure that hull compartments and engine room are clear of fuel fumes. Operate the blowers for at least 5 minutes before starting any engine. Failure to comply can result in injury or death. Inspect the engine room and interior structures for leaks. Engine room is taking on water or Class III leaks.

81

Weekly

0.1

LUBE OIL PURIFIER

a. Inspect the lubricating oil purifier for secure mountings and loose hardware. b. Loosen the drain plug and allow a small amount of oil to drain. The oil should be clear.

LUBE OIL PURIFER

FILL CAP DRAIN PLUG

GEAR OIL LEVEL SIGHTGLASS


I0114T73

Figure 51.

Lube Oil Purifier.

0138-50

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 82

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED LUBE OIL TRANSFER PUMP EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

Visually inspect pumps for leaks, loose Pumps are defective. connections, and damage. Check gages for normal readings (30 PSI [2.1 bar]).

LUBE OIL TRANSFER PUMP DIFFERENTIAL PRESSURE

LUBE OIL TRANSFER PUMP DISCHARGE PRESSURE GAGE

LUBE OIL MANIFOLD AND PIPING STRAINER PIPING

PUMP COUPLING

LUBE OIL TRANSFER PUMP

GREASE FITTING

ELECTRIC MOTOR
I0115T73

Figure 52.

Lube Oil Transfer Pump.

0138-51

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 83

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

SHIPS SERVICE Check the engine and generator for debris, DIESEL foreign objects, leaks, loose or broken GENERATORS fittings, guards, and components. Expansion Tank Check coolant level at the expansion tank sight glass. Coolant level should be at or above the 1/2 full level. Class III leaks.

LUBE OIL PURIFER

FILL CAP DRAIN PLUG

GEAR OIL LEVEL SIGHTGLASS


I0114T73

Figure 53. 84 85 86 Weekly Weekly Weekly 0.1 0.2 0.2 Tank Cap Air Cleaner Indicator Oil Level (Engine Off)

Ships Service Diesel Generators. Inspect tank cap for signs of leakage. Check indicator is in the GREEN range. With the engine off, check the oil dipstick. Oil level should be between the ADD and FULL marks on the dipstick. Add oil as required (MIL-PRF-2104). a. Drain the engine fuel filter/water separator by opening the drain fitting and permitting the accumulated water and sediment drain into a suitable drain pan. b. Check that the filter restriction gages are in the GREEN range. Reading in the RED range. Class III leaks Indicator is in RED range

87

Weekly

0.4

Fuel Filter/Water Separators

0138-52

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 88

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED Gages EQUIPMENT NOT READY/ AVAILABLE IF: Damaged or missing gages.

INTERVAL Weekly

PROCEDURE a. Check the condition of all gages.

b. Check that the fuel pressure gage Reading in the RED range. reads in the GREEN range. c. Check that the water temperature Reading above the gage reads in or below the GREEN range. GREEN range. 89 Weekly 0.2 Air Start Oiler (SSDG 2 Only) Check that the air start oiler is at least 1/2 full. Add oil (OE/HDO-10) as required.

AMMETER (SSDG 1 ONLY)

SIGHT GLASS EXPANSION TANK

FUEL PRESSURE GAGE FILTER RESTRICTION GAGE FUEL FILTER WATER SEPARATOR

COOLANT TEMPERATURE GAGE

OIL PRESSURE GAGE SHIPS SERVICE DIESEL GENERATOR COOLANT TANK CAP

AIR START OILER (SSDG 2 ONLY)

DRAIN FITTING OIL DIPSTICK


I0116T73

Figure 54.

Ships Service Diesel Generators.

0138-53

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 90

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED MAIN PROPULSION ENGINES EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE a. Check the engine for debris, foreign objects, and loose or broken fittings. b. Inspect engine, fuel injection pumps, and cooling pumps for loose or damaged connections or mountings. c. Inspect fluid lines and joints for leaks. d. Check that the oil level in air line lubricator is over 1/2 full. Add oil (OE/ HDO-10) as required. e. Check the oil level. Oil level be between the LOW and FULL marks. Add oil (MOBILGARD 450) as required. f. Check engine that the air filter indicator is in the GREEN range.

Class III leaks.

Air filter indicator is in the RED range

0138-54

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 91 92 93

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 0.3 0.3 ITEM TO BE CHECKED OR SERVICED Cylinder Test Valves EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly Weekly Weekly

PROCEDURE

Check cylinder test valves for leakage and An exhaust gas leak tighten if required. exists.

Handhole Covers Check handhole covers for leakage, and tighten if required. Air Box Drains

NOTE
If air box drains are kept closed, drain after every 4 hours of operation. Check air box drains for proper operation and clean if necessary. Drains do not operate.

AIR BOX DRAIN

HANDHOLE COVERS

CYLINDER TEST VALVE

DIPSTICK

AIR LINE LUBRICATOR


Figure 55. Soak Back Pump. 94 Weekly 1.0

I0117T73

REDUCTION Inspect reduction gear cooling pump for GEAR COOLING leaks, loose connections or loose PUMPS hardware.

Class III leaks.

0138-55

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

STARBOARD REDUCTION GEAR

ELECTRIC MOTOR

ELECTRIC MOTOR

REDUCTION GEAR COOLING PUMPS


Figure 56.

I0118T73

Reduction Gear Cooling Pumps. Visually inspect pumps for leaks, loose connections, and damage. Pumps are defective.

95

Weekly

1.0

FUEL OIL TRANSFER PUMPS

FUEL OIL TRANSFER PUMP COUPLING ELECTRIC MOTOR

GREASE FITTING GREASE FITTINGS


I0119T73

Figure 57.

Fuel Oil Transfer Pumps.

0138-56

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 96

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED FUEL OIL DAY TANKS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE a. Check the amount of fuel in the day tanks. Sound the day tanks and compare the reading to the level indicated on the TLI.

b. Check for any evidence of leakage. Any fuel leakage c. Transfer fuel (Volume 3, WP 0073) as necessary to top off the tanks. 97 Weekly 2.0 FUEL OIL SYSTEM Visually inspect the fuel oil manifold, valves Any fuel leaks or and piping for cracks, leaks, and secure unserviceable mounting. mounting.

FUEL OIL TANK LEVEL INDICATORS

FUEL OIL MANIFOLD

I0120T73

Figure 58.

Fuel Oil System.

0138-57

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 98

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.5 ITEM TO BE CHECKED OR SERVICED OILY BILGE SYSTEM Pump Valves and Piping EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks.

INTERVAL Weekly

PROCEDURE Visually inspect pump for leaks, loose connection and damage. Inspect air filter. Visually inspect all piping valves for leaks, loose connections and damage.

99 100

Weekly Weekly

1.5 3.0

Class III leaks, or unserviceable condition. Class III leaks, or unserviceable condition.

Oily Waste Drain Visually inspect the oily waste drain and and Storage storage tank for leaks, loose connections Tank and damage.

OILY BILGE PUMP

STRAINERS
I0121T73

Figure 59.

Oily Bilge System.

0138-58

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 101

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED BATTERY CHARGERS (SSDG 1, MACHINERY DC CONTROL, ROWPU) EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE a. At 120 V emergency distribution panel No. 1, check the SSDG No. 1 BATTERY CHARGER and MACHINERY DC CONTROL BATTERY CHARGER circuit breakers are set to ON. b. At 120 V distribution panel No. 4 check the ROWPU BATTERY CHARGER circuit breaker is set to ON. c. Check battery chargers for proper connections to battery.

NOTE
A high reading indicates that the batteries are weak and are being recharged or that one or more batteries are unserviceable. d. Check the ammeter reading. The Unit fails to operate and recharge the batteries ammeter should read near 0 for a trickle charge. If the reading is above 3 A, refer to Field Maintenance.

AMMETER

BATTERY CHARGER

I0122T73

Figure 60. Battery Chargers.

0138-59

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 102

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED BATTERY BOX EQUIPMENT NOT READY/ AVAILABLE IF: Batteries not secured for operation

INTERVAL Weekly

PROCEDURE Visually inspect battery box for obvious damage. Ensure that the vent is not obstructed.

WING NUTS

BATTERY BOX COVER

BATTERY BOX
Figure 61. 103 Weekly 1.0 BATTERIES

I0123T73

Battery Box.

WARNING
Do not smoke when observing battery electrolyte level. Batteries give off fumes that can explode. Electrolyte is an acid and can cause personal injury if it contacts skin or eyes. Wear approved goggles, gloves, and apron.

NOTE
Top cover of battery box must be removed to check batteries. a. Inspect batteries, terminals, connections, cables and vent caps for cleanliness and tightness. b. Clean or tighten terminal connections as required. c. Clean battery as required using a paste of baking soda and clean water. Rinse with clean water when finished. d. Check electrolyte level and check specific gravity with a hydrometer. Electrolyte level should be at the bottom of the split rings and specific gravity should be 1.265. Connections badly damaged or excessively loose

0138-60

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

CABLE TERMINAL CONNECTION

TERMINAL CONNECTION

CABLE

NEGATIVE TERMINAL

POSITIVE TERMINAL

VENT CAPS BATTERIES


Figure 62. Batteries.
I0124T73

0138-61

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 104

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED LUBE OIL TRANSFER PUMP EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks.

INTERVAL Monthly

PROCEDURE a. Visually inspect pumps for leaks, loose connections, and damage. b. Grease two motor fittings with 1 to 2 strokes of general purpose grease. c. Grease pump fitting with 1 to 2 strokes of general purpose grease.

LUBE OIL TRANSFER PUMP DIFFERENTIAL PRESSURE

LUBE OIL TRANSFER PUMP DISCHARGE PRESSURE GAGE

LUBE OIL MANIFOLD AND PIPING STRAINER PIPING

PUMP

COUPLING

LUBE OIL TRANSFER PUMP

ELECTRIC MOTOR GREASE FITTING

I0125T73

Figure 63.

Lube Oil Transfer Pump.

0138-62

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 105

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 2.1 ITEM TO BE CHECKED OR SERVICED SEWAGE DISCHARGE PUMPS EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks.

INTERVAL Monthly

PROCEDURE a. Visually inspect pump for leaks, loose connections and damage, and service as necessary. b. Inspect piping and valves

Class III leaks.

c. Inspect motor for any unserviceable Pump inoperative. condition. d. Grease pump fitting with 1 to 2 strokes of general purpose grease.

GREASE FITTING

SEWAGE DISCHARGE PIPING SEWAGE DISCHARGE PUMP

SEWAGE INLET PIPING

VALVE
I0126T73

Figure 64. Sewage Discharge Pumps.

0138-63

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 106

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED MAIN PROPULSION ENGINES Water Jacket Heater EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Check for proper operation by placing your hand near, but not on the block. Warmth should be felt.

107

Monthly

0.5

Soak Back Pump Verify that the soak back pump operates for Soak back system does 25 minutes when the start button is pushed. not operate.

AIR BOX DRAIN

HANDHOLE COVERS

CYLINDER TEST VALVE

DIPSTICK

AIR LINE LUBRICATOR

I0127T73

Figure 65. Soak Back Pump.

0138-64

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 108

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED PRELUBE PUMP EQUIPMENT NOT READY/ AVAILABLE IF: Pump is defective.

INTERVAL Monthly

PROCEDURE Inspect for leaks, loose connections, and damage.

ELECTRIC MOTOR

COUPLING PRELUBE PUMP

I0128T73

Figure 66. Prelube Pump. 109 Monthly 0.3 PROPELLER SHAFTS OILY BILGE SYSTEM Oily Bilge Strainer Check for unusual vibrations. Visually inspect for leaks, loose connections, and damage. Remove the top, and inspect the basket. Remove/clear any debris. Shaft is misaligned or bent, or bearing is excessively worn.

110

Monthly

0.2

OILY BILGE PUMP

STRAINERS
I0129T73

Figure 67. Oily Bilge System.

0138-65

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 111

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED BATTERIES EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

WARNING
Do not smoke when observing battery electrolyte level. Batteries give off fumes that can explode. Electrolyte is an acid and can cause personal injury if it contacts skin or eyes. Wear approved goggles, gloves, and apron.

NOTE
Top cover of battery box must be removed to check batteries. a. Inspect batteries, terminals, connections, cables and vent caps for cleanliness and tightness. b. Clean or tighten terminal connections as required. c. Clean battery as required using a paste of baking soda and clean water. Rinse with clean water when finished. d. Check electrolyte level and check specific gravity of electrolyte with a hydrometer. Electrolyte level should be at the bottom of the split rings and specific gravity should be 1.265. Connections badly damaged or excessively loose

0138-66

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0138

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

CABLE TERMINAL CONNECTION

TERMINAL CONNECTION

CABLE

NEGATIVE TERMINAL

POSITIVE TERMINAL

VENT CAPS BATTERIES


I0130T73

Figure 68. Batteries.

0138-67

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4

0138

Table 2. Equipment Fuel Oil Transfer Pump Fuel Oil Transfer Pump Electric Motor Lube Oil Purifier Gear Oil Lube Oil Transfer Pump Motor

Lubricant and Coolant Specifications. Lubricant and Coolant Specification General Purpose Grease (MIL-PRF-24139) General Purpose Grease (MIL-PRF-24139) OE/HDO-30 (M2104-3-30W) General Purpose Grease (MIL-PRF-24139) OE/HDO-10 (M2104-3-10W) 50/50 Mix Antifreeze and Water OE/HDO-10 (M2104-3-10W) MOBILEGARD 450 (9150-00-135-2634) OE/HDO-40 (9150-00-188-9862) General Purpose Grease (MIL-PRF-24139) 50/50 Mix Antifreeze and Water OE/HDO-30 (MIL-PRF-2104) OE/HDO-10 (M2104-3-10W)

Main Propulsion Engine Air Line Lubricator Main Propulsion Engine Coolant Main Propulsion Engine Governor Main Propulsion Engine Lube Oil Reduction Gear Oil Sewage Discharge Pump SSDG Engine Coolant SSDG Engine Lube Oil SSDG 2 Air Start Oiler END OF TASK END OF WORK PACKAGE

0138-68

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00003)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION ENCLOSED OPERATING STATION (EOS)

0139

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0139-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00004)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0139

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED EOS CONSOLE EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Inspect console for cleanliness, clean as Unit does not power up. required. Look for any loose, missing, or broken switches or controls, gages, indicator lights, or obvious damage. Ensure that throttle controls operate smoothly and do not bind. Unit does not communicate with the pilothouse.

Before

0.2

Engine Order Conduct test with pilothouse to ensure Telegraph (EOT) communication. Move selector through each position ensuring corresponding indicator lights. Steering Gear Alarm Panel Remote Propulsion Indicator Panel Display, Machinery Plant Monitoring System

3 4

Before Before

0.2 0.2

Press SYSTEM TEST pushbutton. All lights Unit not repairable. should light. Press and hold LAMP TEST button. All The indicator panel is lights should light. Adjust the intensity of the unreadable, or it does not lights using the dimmer control. function. Using PAGE + pushbutton, page through Any display that is each screen to ensure that each display is unreadable or readable. "scrambled".

Before

1.0

EOS CONSOLE

REMOTE PROPULSION COMMAND TRANSFER INDICATOR PANEL

CONTROL AIR ENGINE ORDER PRESSURE TELEGRAPH STEERING GEAR ALARM PANEL

PORT

STARBOARD

STOP

STOP

1/4

HA

LF
ASTERN

HA
AHEAD

LF

HA

1/4
LF HA
AHEAD

3/4

3/4

3/4

ASTERN

LL FU

ENGINE ORDER TELEGRAPH

1/4

LF

1/4

3/4

FU LL

LL FU

FU LL

ENGINE ORDER TELEGRAPH

21MC INTERCOM DISPLAY MACHINERY PLANT MONITORING SYSTEM REMOTE START PANEL

STBD REDUCTION STARBOARD MAIN ENGINE GEAR AHEAD/ ASTERN SELECTOR THROTTLE CLUTCH
Figure 1.

PORT MAIN PORT REDUCTION ENGINE GEAR AHEAD/ THROTTLE ASTERN SELECTOR CLUTCH
EOS Console.

I0131T73

0139-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00004)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 6

0139

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.7 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

MAIN Visually inspect the exterior of the If any part is missing, or SWITCHBOARD switchboard for damaged or missing circuit meters are unserviceable. breakers, meters, controls, indicators, or lights. Switchboard Inspect and test components on the switchboard. Service as necessary. Any component inoperative or unserviceable.

Before

0.5

MAIN SWITCHBOARD AC AMMETER AC AMMETER HERTZ AC VOLTS AC VOLTS HERTZ METER METER METER METER AC WATT AC WATT METER METER

I0132T73

Figure 2.

Main Switchboard.

0139-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00004)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 8

0139

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 2.0 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

TANK LEVEL Set ON-OFF switch to OFF position until all INDICATOR fluid level meters read zero. (TLI) TRANSMITTER AND RECEIVER PANELS

FUEL OIL AND LUBE OIL MASTER TLI IN EOS

MASTER TLI IN EOS

LUBE OIL

1 PORT

1 STBD

2 STBD

2 PORT

2 CENTER

3 CENTER

PANEL CONTROL

ON/OFF SWITCH POWER INDICATOR

CHT

SLUDGE

FRESH WATER STBD

FRESH WATER PORT

BALLAST PEAK

BALLAST STBD

BALLAST PORT

PANEL CONTROL

ON/OFF SWITCH

4 STBD

4 PORT

STBD DAY TK

PORT DAY TK

POWER INDICATOR FUSE ALARM ALARM SILENCE FUSE ALARM ALARM SILENCE
I0133T73

Figure 3.

Tank Level Indicator (TLI) Transmitter and Receiver Panels

0139-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00004)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 9

0139

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EOS CONSOLE Display Machinery Plant Monitoring System EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

Using PAGE + pushbutton, page through Any display that is each screen to ensure that each display is unreadable or readable. "scrambled."

EOS CONSOLE

REMOTE PROPULSION COMMAND CONTROL AIR INDICATOR PANEL TRANSFER PRESSURE

ENGINE ORDER TELEGRAPH STEERING GEAR ALARM PANEL

PORT

STARBOARD

STOP

STOP

1/4

HA

LF
ASTERN

HA
AHEAD

LF

HA

1/4
HA
AHEAD

3/4
LL FU

3/4
FU LL

3/4
LL FU

ASTERN

ENGINE ORDER TELEGRAPH

1/4

LF

ENGINE ORDER TELEGRAPH

1/4

LF

3/4
FU LL

21MC INTERCOM DISPLAY MACHINERY PLANT MONITORING SYSTEM

STBD REDUCTION STARBOARD GEAR AHEAD/ MAIN ENGINE ASTERN SELECTOR THROTTLE CLUTCH

PORT MAIN PORT REDUCTION GEAR AHEAD/ ENGINE THROTTLE ASTERN SELECTOR CLUTCH

REMOTE START PANEL


I0134T73

Figure 4. EOS Console.

0139-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00004)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 10

0139

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.7 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

MAIN Visually inspect the exterior of the If any part is missing, or SWITCHBOARD switchboard for damaged or missing circuit meters are unserviceable. breakers, meters, controls, indicators, or lights. Switchboard Inspect and test components on the switchboard. Service as necessary. Any component inoperative or unserviceable.

11

During

0.5

MAIN SWITCHBOARD AC AMMETER AC AMMETER HERTZ AC VOLTS HERTZ AC VOLTS METER METER METER METER AC WATT AC WATT METER METER

I0135T73

Figure 5.

Main Switchboard.

0139-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00004)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 12

0139

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.5 ITEM TO BE CHECKED OR SERVICED TANK LEVEL INDICATOR (TLI) TRANSMITTER AND RECEIVER PANELS Alarm EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE Set the ON-OFF switch on the master units to the ON position and verify that the POWER lamp lights. Visually inspect all remote indicator receiver devices to ensure that they follow the master panel in the EOS. At the 11 channel master TLI panel, pull out and up on the ALARM SILENCE switch to test the alarm. The alarm will sound. Then pull out and press down the ALARM SILENCE switch and release, and verify that the alarm silences.

13

During

0.2

FUEL OIL AND LUBE OIL MASTER TLI IN EOS

MASTER TLI IN EOS

LUBE OIL

1 PORT

1 STBD

2 STBD

2 PORT

2 CENTER

3 CENTER

PANEL CONTROL

ON/OFF SWITCH POWER INDICATOR

CHT

SLUDGE

FRESH WATER STBD

FRESH WATER PORT

BALLAST PEAK

BALLAST STBD

BALLAST PORT

PANEL CONTROL

ON/OFF SWITCH

4 STBD

4 PORT

STBD DAY TK

PORT DAY TK

POWER INDICATOR FUSE ALARM ALARM SILENCE FUSE ALARM ALARM SILENCE
I0136T73

Figure 6. Tank level Indicator (TLI) Transmitter and Receiver Panels.

0139-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00004)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 14

0139

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED MARINE AIR CONDITIONER UNIT EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE Inspect for secure mounting and listen for unusual sounds during operation.

MARINE AIR CONDITIONER

I0137T73

Figure 7.

Marine Air Conditioner Unit.

0139-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00004)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 15

0139

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EOS CONSOLE EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

Inspect console for cleanliness clean as Unit does not power up. required. Look for any loose, missing, or broken switches or controls, gages, indicator lights, or obvious damage. Ensure that throttle controls operate smoothly and do not bind.

EOS CONSOLE

REMOTE PROPULSION INDICATOR PANEL

COMMAND TRANSFER

CONTROL AIR PRESSURE

ENGINE ORDER TELEGRAPH STEERING GEAR ALARM PANEL

PORT

STARBOARD

STOP

STOP

1/4

HA

LF
ASTERN

HA
AHEAD

LF

HA

1/4
HA
AHEAD

3/4
LL FU

3/4
FU LL

3/4
LL FU

ASTERN

ENGINE ORDER TELEGRAPH

1/4

LF

ENGINE ORDER TELEGRAPH

1/4

LF

3/4
FU LL

21MC INTERCOM DISPLAY MACHINERY PLANT MONITORING SYSTEM REMOTE START PANEL

STBD REDUCTION GEAR AHEAD/ ASTERN SELECTOR

STARBOARD MAIN ENGINE THROTTLE CLUTCH

PORT MAIN PORT REDUCTION ENGINE GEAR AHEAD/ THROTTLE ASTERN SELECTOR CLUTCH
I0139T73

Figure 8. EOS Console.

0139-9

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00004)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 16

0139

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Engine Order Telegraph EQUIPMENT NOT READY/ AVAILABLE IF: Unit does not communicate with the pilothouse.

INTERVAL Weekly

PROCEDURE Conduct test with pilothouse to ensure communication. Move selector through each position ensuring corresponding indicator lights.

17 18

Weekly Weekly

0.2 0.2

Steering Gear Alarm Panel Remote Propulsion Indicator Panel

Press SYSTEM TEST pushbutton. All lights Unit not repairable. should light. Press and hold LAMP TEST button. All The indicator panel is lights should light. Adjust the intensity of the unreadable, or it does not lights using the dimmer control. function.

EOS CONSOLE

REMOTE PROPULSION INDICATOR PANEL

COMMAND TRANSFER

CONTROL AIR PRESSURE

ENGINE ORDER TELEGRAPH STEERING GEAR ALARM PANEL

PORT

STARBOARD

STOP

STOP

1/4

HA

LF
ASTERN

HA
AHEAD

LF

HA

1/4
HA
AHEAD

3/4
LL FU

3/4
FU LL

3/4
LL FU

ASTERN

ENGINE ORDER TELEGRAPH

1/4

LF

ENGINE ORDER TELEGRAPH

1/4

LF

3/4
FU LL

21MC INTERCOM DISPLAY MACHINERY PLANT MONITORING SYSTEM REMOTE START PANEL

STBD REDUCTION GEAR AHEAD/ ASTERN SELECTOR

STARBOARD MAIN ENGINE THROTTLE CLUTCH


Figure 9.

PORT MAIN PORT REDUCTION ENGINE GEAR AHEAD/ THROTTLE ASTERN SELECTOR CLUTCH
I0139T73

EOS Console.

0139-10

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00004)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 19

0139

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.7 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

MAIN Visually inspect the exterior of the If any part is missing, or SWITCHBOARD switchboard for damaged or missing circuit meters are unserviceable. breakers, meters, controls, indicators, or lights. Switchboard Inspect and test components on the switchboard. Service as necessary. Any component inoperative or unserviceable. Any component inoperative or unserviceable.

20

Weekly

0.5

21

Monthly

0.7

MAIN Inspect and test components on the SWITCHBOARD switchboard. Service as necessary.

MAIN SWITCHBOARD AC AMMETER AC AMMETER HERTZ AC VOLTS HERTZ AC VOLTS METER METER METER METER AC WATT AC WATT METER METER

I0140T73

Figure 10.

Main Switchboard.

0139-11

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00004)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 22

0139

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 2.0 ITEM TO BE CHECKED OR SERVICED TANK LEVEL INDICATOR (TLI) TRANSMITTER AND RECEIVER PANELS Alarm EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Set the ON-OFF switch on the master units to the ON position and verify that the POWER lamp lights. Visually inspect all remote indicator receiver devices to ensure that they follow the master panel in the EOS. At the 11 channel master TLI panel, pull out and up on the ALARM SILENCE switch to test the alarm. The alarm will sound. Then pull out and press down the ALARM SILENCE switch and release, and verify that the alarm silences. Set ON-OFF switch to OFF position until all fluid level meters read zero.

23

Monthly

0.2

24

Monthly

0.2

Switch

FUEL OIL AND LUBE OIL MASTER TLI IN EOS

MASTER TLI IN EOS

LUBE OIL

1 PORT

1 STBD

2 STBD

2 PORT

2 CENTER

3 CENTER

PANEL CONTROL

ON/OFF SWITCH POWER INDICATOR

CHT

SLUDGE

FRESH WATER STBD

FRESH WATER PORT

BALLAST PEAK

BALLAST STBD

BALLAST PORT

PANEL CONTROL

ON/OFF SWITCH

4 STBD

4 PORT

STBD DAY TK

PORT DAY TK

POWER INDICATOR FUSE ALARM ALARM SILENCE FUSE ALARM ALARM SILENCE
I0141T73

Figure 11.

Tank Level Indicator (TLI) Transmitter and Receiver Panels.

0139-12

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00004)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 25

0139

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED MARINE AIR CONDITIONER UNIT EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Inspect for secure mounting, and listen for unusual sounds during operation.

MARINE AIR CONDITIONER

I0142T73

Figure 12.

Marine Air Conditioner Unit.

END OF TASK END OF WORK PACKAGE

0139-13/14 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00004)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION AMS 1

0140

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References WP 0138 WP 0151 Equipment Condition N/A

0140-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED BOW THRUSTER ENGINE AND MARINE GEAR Air Starter Oiler Bowl Engine Crankcase Oil EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Visually inspect bowl. Cup must be at least 1/2 full. Add oil (OE/HDO-10) as required.

Before

0.2

With engine turned off, check oil dipstick. Oil level should be between the ADD and FULL marks on the dipstick. Add oil (OE/ HDO-30) as required. With engine turned off, check the marine gear oil dipstick. Oil level should be between the ADD and FULL marks. Add oil (OE/HDO-30) as required.

Before

0.2

Marine Gear Oil

BOW THRUSTER ENGINE FILLER CAP TACHOMETER GAGE BOARD AIR STARTER OIL BOWL

EXPANSION TANK HOSE OIL FILL

BOW THRUSTER ENGINE

COOLANT LEVEL GAGE

DIPSTICK FUEL FILTER WATER SEPARATORS

OIL FILTER

I0144T73

Figure 1.

Bow Thruster Engine and Marine Gear.

0140-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 4

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Cooling System EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING
Engine coolant may be hot. Contact with hot coolant can cause serious injury or death. Check coolant level at the coolant level gage. Gage should read FULL. Add coolant (50/50 mix of antifreeze and water) as required.

5 6 7

Before Before Before

0.2 0.2 0.2

Mounting Fixtures

Inspect for damaged or missing parts. Damaged or missing parts. Class III leaks.

Heat Exchanger Inspect for leaks, sponginess, or other Connecting Lines damage. Flexible Hoses Inspect for leaks, sponginess, or other damage.

BOW THRUSTER ENGINE FILLER CAP TACHOMETER GAGE BOARD AIR STARTER OIL BOWL

EXPANSION TANK HOSE OIL FILL

BOW THRUSTER ENGINE

COOLANT LEVEL GAGE

DIPSTICK FUEL FILTER WATER SEPARATORS

OIL FILTER

I0144T73

Figure 2. Bow Thruster Engine and Marine Gear.

0140-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 8

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PUMP DRIVE ENGINE Air Starter Oiler Bowl Engine Crankcase Oil EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Visually inspect bowl. Cup must be at least 1/2 full. Add oil (OE/HDO-10) as required.

Before

0.2

With engine turned off, check oil dipstick. Oil level should be between the ADD and FULL marks on the dipstick. Add oil (OE/ HDO-30) as required.

10

Before

0.2

Cooling System

WARNING
Engine coolant may be hot. Contact with hot coolant can cause serious injury or death. Check coolant level at the coolant level gage. Gage should read FULL. Add coolant (50/50 mix of antifreeze and water) as required.

11 12 13

Before Before Before

0.2 0.2 0.2

Mounting Fixtures

Inspect for damaged or missing parts. Damaged or missing parts. Class III leaks.

Heat Exchanger Inspect for leaks, sponginess, or other Connecting Lines damage. Flexible Hoses Inspect for leaks, sponginess, or other damage.

0140-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

EXPANSION TANK

PUMP DRIVE ENGINE

TACHOMETER

FILLER CAP COOLANT LEVEL GAGE FUEL FILTER WATER SEPARATOR

GREASE FITTING

DIPSTICK

OIL FILTER

PTO GREASE FITTING PUMP DRIVE ENGINE AIR STARTER OILER BOWL GAGE PANEL

I0145T73

Figure 3. Pump Drive Engine.

0140-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 14

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED SLIDING HYDRAULIC WATERTIGHT DOOR EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

CAUTION
Do not operate door with pressure shutoff valves closed as this will back-pressure the local hand pump and cause the seal to rupture Check the hydraulic fluid level in the reservoir located in the main deck passageway (WP 0151).

15

Before

0.2

SLIDING HYDRAULIC WATERTIGHT DOOR

Operate the door to the full OPEN/CLOSED Door will not OPEN and/or position. CLOSE fully.

BLEEDER TRACK VALVE CONTROL VALVE ASSEMBLY

SLIDING WATERTIGHT DOOR

HAND CRANK

HYDRAULIC CYLINDER TRACK ROLLERS


I0146T73

Figure 4.

Sliding Hydraulic Watertight Door.

0140-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 16

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.6 ITEM TO BE CHECKED OR SERVICED HOT WATER RECIRCULATING PUMP EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Visually inspect the pump for leaks, loose Class III leaks. connections, and damage. Compare pressure readings with the readings at the hydropneumatic tank in AMS 2. The two readings should be within 5 PSI of each other.

ELECTRIC MOTOR

HOT WATER PIPING

HOT WATER RECIRCULATING PUMP


I0147T73

Figure 5. Hot Water Recirculating.

0140-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 17

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED BOW THRUSTER ENGINE AND MARINE GEAR Oil Pressure EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

Oil pressure gage should read in the green Reading in the RED range. range.

BOW THRUSTER ENGINE FILLER CAP TACHOMETER GAGE BOARD AIR STARTER OIL BOWL

EXPANSION TANK HOSE OIL FILL COOLANT LEVEL GAGE

BOW THRUSTER ENGINE

FUEL FILTER WATER SEPARATORS


Figure 6.

DIPSTICK

OIL FILTER
I0149T73

Bow Thruster Engine and Marine Gear.

0140-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 18 19 20 21

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 0.2 0.2 ITEM TO BE CHECKED OR SERVICED Coolant Temperature Tachometer Fuel Pressure Marine Gear Oil Pressure Gage EQUIPMENT NOT READY/ AVAILABLE IF: Reading in the RED range.

INTERVAL During During During During

PROCEDURE Coolant temperature should read in the GREEN range. Engine rpm between 600 (idle) and 2,200 (full speed). Fuel pressure gage should read in the GREEN range.

Reading in the RED range.

In NEUTRAL, the marine gear oil pressure Reading higher or lower gage should read between 50 and 85 PSI that the desired values. (3.5 and 5.9 bar). At 1,800 rpm, with the marine gear ENGAGED the reading should be between 175 and 200 PSI (12.1 and 13.8 bar).

BOW THRUSTER ENGINE FILLER CAP TACHOMETER GAGE BOARD AIR STARTER OIL BOWL

EXPANSION TANK HOSE OIL FILL COOLANT LEVEL GAGE

BOW THRUSTER ENGINE

FUEL FILTER WATER SEPARATORS

DIPSTICK

OIL FILTER
I0149T73

Figure 7. Bow Thruster Engine and Marine Gear.

0140-9

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 22

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PUMP DRIVE ENGINE Oil Pressure Coolant Temperature EQUIPMENT NOT READY/ AVAILABLE IF: Reading in the RED range.

INTERVAL During

PROCEDURE a. Oil pressure gage should read in the GREEN range.

b. Coolant temperature should read in the GREEN range. 23 24 During During 0.2 0.2 Tachometer Fuel Pressure Engine rpm between 600 (idle) and 2,200 (full speed). Fuel pressure gage should read in the GREEN range.

Reading in the RED range.

Reading in the RED.

EXPANSION TANK

PUMP DRIVE ENGINE

TACHOMETER

FILLER CAP COOLANT LEVEL GAGE FUEL FILTER WATER SEPARATOR

GREASE FITTING

DIPSTICK

OIL FILTER

PTO GREASE FITTING PUMP DRIVE ENGINE


Figure 8.

AIR STARTER OILER BOWL

GAGE PANEL
I0150T73

Pump Drive Engine.

25

After

0.2

BOW THRUSTER ENGINE AND MARINE GEAR Air Starter Oiler Bowl Engine Crankcase Oil

Visually inspect bowl. Cup must be at least 1/2 full. Add oil (OE/HDO-10) as required.

26

After

0.2

With engine turned off, check oil dipstick. Oil level should be between the ADD and FULL marks on the dipstick. Add oil (OE/ HDO-30) as required.

0140-10

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 27

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Marine Gear Oil EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE With engine turned off, check the marine gear oil dipstick. Oil level should be between the ADD and Full marks. Add oil (OE/HDO-30) as required.

28

After

0.2

Cooling System

WARNING
Engine coolant may be hot. Contact with hot coolant can cause serious injury or death. Check coolant level at the coolant level gage. Gage should read FULL. Add coolant (50/50 mix of antifreeze and water) as required.

BOW THRUSTER ENGINE FILLER CAP EXPANSION TANK HOSE OIL FILL COOLANT LEVEL GAGE BOW THRUSTER ENGINE

TACHOMETER GAGE BOARD AIR STARTER OIL BOWL

DIPSTICK FUEL FILTER WATER SEPARATORS

OIL FILTER

I0151T73

Figure 9. Bow Thruster Engine and Marine Gear.

0140-11

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 29

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PUMP DRIVE ENGINE Air Starter Oiler Bowl Engine Crankcase Oil EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE Visually inspect bowl. Cup must be at least 1/2 full. Add oil (OE/HDO-10) as required.

30

After

0.2

With engine turned off, check oil dipstick. Oil level should be between the ADD and FULL marks on the dipstick. Add oil (OE/ HDO-30) as required.

31

After

0.2

Cooling System

WARNING
Engine coolant may be hot. Contact with hot coolant can cause serious injury or death. Check coolant level at the coolant level gage. Gage should read FULL. Add coolant (50/50 mix of antifreeze and water) as required.

EXPANSION TANK

PUMP DRIVE ENGINE

TACHOMETER

FILLER CAP COOLANT LEVEL GAGE FUEL FILTER WATER SEPARATOR

GREASE FITTING

DIPSTICK

OIL FILTER

PTO GREASE FITTING PUMP DRIVE ENGINE


Figure 10.

AIR STARTER OILER BOWL

GAGE PANEL
I0152T73

Pump Drive Engine.

0140-12

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 32

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED HOT WATER RECIRCULATING PUMP EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Visually inspect pump and gages for leaks, loose connections and damage.

ELECTRIC MOTOR

HOT WATER PIPING

HOT WATER RECIRCULATING PUMP


I0153T73

Figure 11. Hot Water Recirculating Pump.

0140-13

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 33

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED BOW THRUSTER ENGINE AND MARINE GEAR Air Starter Oiler Bowl EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Visually inspect bowl. Cup must be at least 1/2 full. Add oil (OE/HDO-10) as required.

BOW THRUSTER ENGINE FILLER CAP EXPANSION TANK HOSE OIL FILL AIR STARTER OIL BOWL COOLANT LEVEL GAGE BOW THRUSTER ENGINE

TACHOMETER GAGE BOARD

DIPSTICK FUEL FILTER WATER SEPARATORS


Figure 12. Bow Thruster Engine and Marine Gear.

OIL FILTER
I0155T73

0140-14

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 34

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Engine Crankcase Oil EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE With engine turned off, Check oil dipstick. Oil level should be between the ADD and FULL marks on the dipstick. Add oil (OE/ HDO-30) as required. With engine turned off, check the marine gear oil dipstick. Oil level should be between the ADD and Full marks. Add oil (OE/HDO-30) as required.

35

Weekly

0.2

Marine Gear Oil

36

Weekly

0.2

Cooling System

WARNING
Engine coolant may be hot. Contact with hot coolant can cause serious injury or death. Check coolant level at the coolant level gage. Gage should read FULL. Add coolant (50/50 mix of antifreeze and water) as required.

37 38 39

Weekly Weekly Weekly

0.2 0.2 0.2

Mounting Fixtures

Inspect for damaged or missing parts. Damaged or missing parts. Class III leaks.

Heat Exchanger Inspect for leaks, sponginess, or other Connecting Lines damage. Flexible Hoses Inspect for leaks, sponginess, or other damage.

BOW THRUSTER ENGINE FILLER CAP EXPANSION TANK HOSE OIL FILL AIR STARTER OIL BOWL COOLANT LEVEL GAGE BOW THRUSTER ENGINE

TACHOMETER GAGE BOARD

DIPSTICK FUEL FILTER WATER SEPARATORS


Figure 13. Bow Thruster Engine and Marine Gear.

OIL FILTER
I0155T73

0140-15

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 40

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PUMP DRIVE ENGINE Air Starter Oiler Bowl Engine Crankcase Oil EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Visually inspect bowl. Cup must be at least 1/2 full. Add oil (OE/HDO-10) as required.

41

Weekly

0.2

With engine turned off, check oil dipstick. Oil level should be between the ADD and FULL marks on the dipstick. Add oil (OE/ HDO-30) as required.

42

Weekly

0.2

Cooling System

WARNING
Engine coolant may be hot. Contact with hot coolant can cause serious injury or death. Check coolant level at the coolant level gage. Gage should read FULL. Add coolant (50/50 mix of antifreeze and water ) as required.

43 44 45

Weekly Weekly Weekly

0.2 0.2 0.2

Mounting Fixtures

Inspect for damaged or missing parts. Damaged or missing parts. Class III leaks.

Heat Exchanger Inspect for leaks, sponginess, or other Connecting Lines damage. Flexible Hoses Inspect for leaks, sponginess, or other damage.

0140-16

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

EXPANSION TANK

PUMP DRIVE ENGINE

TACHOMETER

FILLER CAP COOLANT LEVEL GAGE FUEL FILTER WATER SEPARATOR

GREASE FITTING

DIPSTICK

OIL FILTER

PTO GREASE FITTING PUMP DRIVE ENGINE AIR STARTER OILER BOWL GAGE PANEL
I0156T73

Figure 14. Pump Drive Engine.

0140-17

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 46

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED SLIDING HYDRAULIC WATERTIGHT DOOR Oil Level Hydraulic Cylinder Assembly Control Valve Assembly Tracks EQUIPMENT NOT READY/ AVAILABLE IF: Low oil level.

INTERVAL Monthly

PROCEDURE Check oil level dipstick in expansion tank (WP 0138). Add oil as required.

47

Monthly

0.2

Inspect hydraulic cylinder assembly for leaks and damage.

Class III leaks exist. unserviceable damage.

48 49

Monthly Monthly

0.2 0.2

Inspect hydraulic control valve assembly for Class III leaks exist. leaks and damage. Unserviceable damage. a. Visually inspect tracks for secure mounting and damage. b. Lubricate the tracks with general purpose grease (brush on). Tracks damaged or not mounted securely.

50 51 52

Monthly Monthly Monthly

0.2 0.2 0.2

Rollers Local Hand Pump Operation

Lubricate each roller with general purpose grease from a grease gun. Inspect local hand pump for secure mounting and damage.

NOTE
Local hand pump may have to be operated very fast to break door loose when initially opened. Hand crank the door to the full OPEN/ CLOSED position. Door will not open and/or close fully.

CONTROL VALVE ASSEMBLY

BLEEDER SLIDING VALVE TRACK WATERTIGHT DOOR

HAND CRANK

HYDRAULIC CYLINDER TRACK ROLLERS


I0157T73

Figure 15.

Sliding Hydraulic Watertight Door.

0140-18

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 53

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

Semi-Annual 0.2

BOW Grease governor control linkage with THRUSTER general purpose grease. ENGINE AND MARINE GEAR Governor Control Linkage

BOW THRUSTER ENGINE FILLER CAP TACHOMETER GAGE BOARD AIR STARTER OIL BOWL HOSE OIL FILL COOLANT LEVEL GAGE EXPANSION TANK BOW THRUSTER ENGINE

DIPSTICK FUEL FILTER WATER SEPARATORS


Figure 16. Bow Thruster and Marine Gear.

OIL FILTER

I0158T73

0140-19

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 54

0140

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

Semi-Annual 0.2

PUMP DRIVE Grease governor control linkage with ENGINE general purpose grease. Governor Control Linkage Power Take-Off (PTO) Use grease gun to lube four fittings with general purpose grease.

55

Semi-Annual 0.2

EXPANSION TANK

PUMP DRIVE ENGINE

TACHOMETER

FILLER CAP COOLANT LEVEL GAGE FUEL FILTER WATER SEPARATOR

GREASE FITTING

DIPSTICK

OIL FILTER

PTO GREASE FITTING PUMP DRIVE ENGINE


Figure 17.

AIR STARTER OILER BOWL

GAGE PANEL
I0159T73

Pump Drive Engine.

0140-20

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4

0140

Table 2. Lubricant and Coolant Specifications. Equipment Bow Thruster Engine Air Starter Oil Bow Thruster Engine Coolant Bow Thruster Engine Governor Control Linkage Bow Thruster Engine Lube Oil Bow Thruster Marine Gear Hydraulic Watertight Door Rollers Hydraulic Watertight Door Tracks Pump Drive Engine Air Starter Oil Pump Drive Engine Coolant Pump Drive Engine Governor Control Linkage Pump Drive Engine Lube Oil Pump Drive Engine PTO Bearings END OF TASK END OF WORK PACKAGE Lubricant or Coolant Specification OE/HDO-10 (M2104-3-10W) 50/50 mix of antifreeze and water General Purpose Grease (MIL-PRF-24139) OE/HDO-30 (M2104-3-30W) OE/HDO-30 (M2104-3-30W) General Purpose Grease (MIL-PRF-24139) General Purpose Grease (MIL-PRF-24139) OE/HDO-10 (M2104-3-10W) 50/50 mix of antifreeze and water General Purpose Grease (MIL-PRF-24139) OE/HDO-30 (M2104-3-30W) General Purpose Grease (MIL-PRF-24139)

0140-21/22 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00005)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION AMS 2

0141

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A References WP 0145 References (cont.) WP 0147 WP 0148 Equipment Condition N/A

Table 1.
ITEM NO. 1

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED POTABLE WATER HYDROPNEUMATIC TANK EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Inspect tank, pressure gage, pressure switches, and relief valve for leaks, damage, and secure mounting.

PRESSURE GAGE AIR CHARGING CONNECTION


25 20 15 10 5 0 30 35 40 45 50 55 60

POTABLE WATER HYDRO PNEUMATIC TANK

VENT VALVE

I0160T73

Figure 1.

Potable Water Hydropneumatic Tank.

0141-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 2

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED STEERING GEAR EMERGENCY HAND PUMP EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks; not securely mounted. Pump does not operate smoothly.

INTERVAL Before

PROCEDURE Inspect pump for secure mounting and leaks. Observe hand pump for smooth operation.

RUDDER ANGLE INDICATOR

HYDRAULIC ACCUMULATOR

STEERING HYDRAULIC POWER PACK MOTOR CONTROLLERS

330
340

320

2 1

STEERING GEAR EMERGENCY HAND PUMP


2 1 3

25 20 15 10 5 0

30 35 40 45 50 55 60

PRESSURE GAGE

STEERING HYDRAULIC POWER PACK


I0161T73

Figure 2. 3 Before 0.2 RUDDER ANGLE INDICATOR

Steering Gear Emergency Hand Pump. Ensure that dimmer is able to adjust light intensity. Rudder angle must align with wheel direction. Rudder angle indicator is not operational.

Before

0.5

STEERING HYDRAULIC POWER PACK Hydraulic Pump Unit Rudder Angle Indicator Gages

Operate power pack in all modes and check Unit fails to operate. for leaks. Check fluid level in main deck fan room (WP 0147).

5 6

Before Before

0.5 0.5

Rudder operates full port to starboard. Check gages for damage and proper operation.

Rudder angle indicator fails to operate. Gages fail to operate.

0141-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 7

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: Motor controllers fail to operate.

INTERVAL Before

PROCEDURE

STEERING Inspect motor controller for obvious HYDRAULIC damage or missing or broken switches. POWER PACK MOTOR CONTROLLERS

RUDDER ANGLE INDICATOR

HYDRAULIC ACCUMULATOR

STEERING HYDRAULIC POWER PACK MOTOR CONTROLLERS

330

340

320

2 1

STEERING GEAR EMERGENCY HAND PUMP


2 1 3

25 20 15 10 5 0

30 35 40 45 50 55 60

PRESSURE GAGE

STEERING HYDRAULIC POWER PACK


I0162T73

Figure 3. Steering Hydraulic Power Pack.

0141-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 8

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED TANK LEVEL INDICATOR RECEIVERS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Observe potable water level at local Report any differences to receiver. Compare reading with receiver Field Maintenance. panel in Enclosed Operating Station (EOS).

POTABLE WATER LOCAL TANK LEVEL INDICATORS

GALLONS X 100

F.O. TANK

F.O. TANK

GALLONS X 100

ON

ON

POTABLE WATER MOTOR CONTROLLERS

OFF

OFF

POWER
AVAILABLE

POWER
AVAILABLE

START STOP

START STOP

MANUAL

AUTO

MANUAL

AUTO

RESET

RESET

I0163T73

Figure 4.

Tank Level Indicator Receivers.

0141-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 9

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

POTABLE Visually inspect pumps for leaks, loose If both pumps fail to WATER PUMPS connections and damage. Check discharge operate. pressure gages for normal readings from 30 to 60 PSI (2 to 4 bar).

POTABLE WATER PIPING POTABLE WATER DISCHARGE

POTABLE WATER ELECTRIC MOTORS

POTABLE WATER PUMPS


I0164T73

Figure 5. Potable Water Pumps.

0141-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 10

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED AIR CONDITIONING CONDENSING UNITS Liquid Level Refrigerant Oil Level Sight Glass Moisture Indicator REFRIGERATION CONDENSING UNITS Liquid Level Refrigerant Oil Level Sight Glass Moisture Indicator EQUIPMENT NOT READY/ AVAILABLE IF: If both units fail to operate. Oil level is low.

INTERVAL Before

PROCEDURE Check the oil level in the sight glass. The level should be 1/8 to 1/2 full.

11 12

Before Before

0.5 0.3

Check the oil level in the oil level sight glass. Oil level is low. The level should be 1/4 to 3/4 full. Check the moisture indicator. It should be BLUE. Notify Field Maintenance if the moisture indicator is PINK. Check the oil level in the sight glass. The level should be 1/8 to 1/2 full. Oil level is low.

13

Before

0.3

14 15

Before Before

0.3 0.3

Check the oil level in the oil level sight glass. Oil level is low. The level should be 1/4 to 3/4 full. Check the moisture indicator. It should be BLUE. Notify Field Maintenance if the moisture indicator is PINK.

DISCHARGE PRESSURE GAGE SUCTION PRESSURE GAGE OIL PRESSURE GAGE SUCTION GAS TEMPERATURE GAGE LIQUID LINE TEMPERATURE GAGE LIQUID LEVEL GAGE OIL LEVEL SIGHT GLASS MOISTURE INDICATOR COMPRESSOR

I0165T73

Figure 6.

Air Conditioning Condensing Units.

0141-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 16 17

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 0.5 ITEM TO BE CHECKED OR SERVICED BILGE MANIFOLD FIRE AND GENERAL SERVICE PUMPS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before Before

PROCEDURE

Visually inspect manifold for cracks, leaks, Class III leaks or loose and secure mounting. mounting. a. Check pumps, couplings, and sea chest valves for proper operation. Sea chest is clogged when suction pressure is greater than 10 in. Hg (254 mm Hg). b. Check gages for normal readings. Fire main discharge pressure should be 60 to 120 PSI (4.1 to 8.3 bar) against dead head. c. General service pressure should be greater than 60 PSI (4.1 bar) under normal operating conditions. Sea chest cannot be cleared, and suction pressure cannot be lowered below 10 in. Hg (254 mm Hg). Fire main discharge pressure above 120 PSI (8.3 bar) or below 60 PSI (4.1 bar). Unable to maintain general service discharge pressure at 60 PSI (4.1 bar) under normal operating conditions.

FIRE AND GENERAL SERVICE PUMPS

BILGE MANIFOLD
I0166T73

Figure 7.

Fire and General Service Pumps.

0141-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 18

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

BILGE/BALLAST Visually check oil level sight gage (1/2 full). Pump is defective or fails PUMP Inspect pumps, couplings for leaks, loose to operate. connections, and damage.

BILGE/BALLAST MOTOR CONTROLLER

BILGE/BALLAST PUMP BILGE MANIFOLD

I0167T73

Figure 8. 19 Before 0.5 BALLAST MANIFOLD

Bilge/Ballast Pump.

Visually inspect manifold for cracks, leaks, Class III leaks or loose or secure mounting. Check for proper mounting. operation of valves. Valves should move freely through entire range of motion.

BALLAST MANIFOLD

BALLAST VALVES

I0168T73

Figure 9.

Ballast Manifold.

0141-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 20

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.1 ITEM TO BE CHECKED OR SERVICED SLIDING HYDRAULIC WATERTIGHT DOOR EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

CAUTION
Do not operate door with pressure shutoff valves closed as this will back-pressure the local hand pump and cause the seals to rupture.

NOTE
Local hand pump may have to be operated very fast to break door loose when initially opened. Operate hand crank-operated door to full open/closed position. Check oil level in reservoir (WP 0148). Door will not open and/or close fully.

CONTROL VALVE ASSEMBLY

SLIDING BLEEDER VALVE TRACK WATERTIGHT DOOR

HAND CRANK

HYDRAULIC CYLINDER TRACK ROLLERS


I0169T73

Figure 10. Sliding Hydraulic Watertight Door.

0141-9

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 21

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED WORKSHOP TOOL AND ASSOCIATED EQUIPMENT VENT HOOD Hood ARC WELDER Labels EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Ensure that all tools, spare parts, and equipment belonging to the craft are available, clean, serviceable, and properly mounted or stowed. Inspect hood for cleanliness. Clean as required.

22 23

Before Before

0.2 0.2

WARNING
Allow cooling period before servicing. Hot surfaces can cause severe burns. Inspect labels on unit for legibility. All warning labels must be clearly readable. Refer damaged or unreadable labels to Field Maintenance.

0141-10

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 24

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Weld Cables EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING
Shut off power supply before removing covers. Electric shock can kill. Inspect cables for breaks in insulation. Repair or replace damaged cables. Clean and tighten connections.

WORKSHOP

DRILL PRESS BENCH GRINDER ARC WELDER PIPE VISE

WORK BENCH

BENCH VISE
I0170T73

Figure 11. Workshop Tools and Associated Equipment.

0141-11

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 25

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED DRILL PRESS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING
Do not use hand bits which have a screw tip. At drill press speeds they turn into the wood so rapidly as to lift the work off the table and whirl it. Check that safety glasses and dust mask are available and serviceable.

26

Before

0.2

Belt and Pulley

WARNING
Do not use hand bits which have a screw tip. At drill press speeds they turn into the wood so rapidly as to lift the work off the table and whirl it.

NOTE
Drill press housing cover must be removed. Check gages for worn or frayed belts, Belts worn or frayed or frayed electrical wiring or power cord, loose electrical connections/ connections, missing bits and pieces, worn wiring unserviceable. or damaged pulleys, dirt buildup, and corrosion. 27 Before 0.2 Table Check that 360 degree table swing is unobstructed. Lubricate with GGP as necessary.

0141-12

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

WORKSHOP

DRILL PRESS BENCH GRINDER ARC WELDER PIPE VISE

WORK BENCH

BENCH VISE
I0170T73

Figure 12. Workshop Tools and Associated Equipment.

0141-13

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 28

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED BENCH GRINDER Associated Equipment Wheels Tool Rest Spark Guard WET/DRY VACUUM EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Check that faceshields and dust masks are available and serviceable.

29 30 31 32 33

Before Before Before Before Before

0.2 0.2 0.2 0.2 0.2

Visually check that grinding wheels are serviceable. Visually check that tool rest is in correct position and is securely mounted. Visually check that spark guard is clear, undamaged and securely mounted. Check hose for wear and serviceability.

CUTTING Check that welding glasses are available TORCH OUTFIT and serviceable. (OXY-ACT) CUTTING Inspect cylinders, regulator valves, and TORCH OUTFIT gages for obvious damage. Verify that (OXY-ACT) cylinders are properly stowed for sea. CUTTING Regulator valves operate smoothly. TORCH OUTFIT (OXY-ACT)

34

Before

0.2

35

Before

0.2

WORKSHOP

DRILL PRESS BENCH GRINDER ARC WELDER PIPE VISE

WORK BENCH

BENCH VISE
I0170T73

Figure 13. Workshop Tools and Associated Equipment.

0141-14

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 36

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED STEERING HYDRAULIC POWER PACK Hydraulic Pump Unit Gages STEERING HYDRAULIC POWER PACK MOTOR CONTROLLERS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

Operate power pack in all modes and check Unit fails to operate. Class for leaks. III leaks.

37 38

During During

0.2 0.5

Check gages for damage and proper operation. Inspect motor controller for obvious damage or missing or broken switches. Obvious damage or missing or broken switches.

Gages fail to operate. Motor controllers fail to operate.

RUDDER ANGLE INDICATOR

HYDRAULIC ACCUMULATOR

STEERING HYDRAULIC POWER PACK MOTOR CONTROLLERS

330

340

320

2 1

STEERING GEAR EMERGENCY HAND PUMP


2 1 3

25 20 15 10 5 0

30 35 40 45 50 55 60

PRESSURE GAGE

STEERING HYDRAULIC POWER PACK


I0171T73

Figure 14.

Steering Hydraulic Power Pack Motor Controllers.

0141-15

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 39

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED TANK LEVEL INDICATOR RECEIVERS EQUIPMENT NOT READY/ AVAILABLE IF: Report any differences to Field Maintenance.

INTERVAL During

PROCEDURE Observe potable water level at local receiver. Compare reading with receiver panel in EOS.

POTABLE WATER LOCAL TANK LEVEL INDICATORS

GALLONS X 100

F.O. TANK

F.O. TANK

GALLONS X 100

ON

ON

POTABLE WATER MOTOR CONTROLLERS

OFF

OFF

POWER
AVAILABLE

POWER
AVAILABLE

START STOP

START STOP

MANUAL

AUTO

MANUAL

AUTO

RESET

RESET

I0172T73

Figure 15.

Tank Level Indicator Receivers.

0141-16

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 40

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

POTABLE Visually inspect pumps for leaks, loose If both pumps fail to WATER PUMPS connections and damage. Check discharge operate. pressure gages for normal readings from 30 to 60 PSI (2 to 4 bar).

POTABLE WATER PIPING POTABLE WATER DISCHARGE

POTABLE WATER ELECTRIC MOTORS

POTABLE WATER PUMPS


I0173T73

Figure 16. Potable Water Pumps.

0141-17

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 41

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED AIR CONDITIONING CONDENSING UNITS Liquid Level Refrigerant Oil Level Sight Glass Moisture Indicator Discharge Pressure Gage EQUIPMENT NOT READY/ AVAILABLE IF: Oil level is low.

INTERVAL During

PROCEDURE Check the oil level in the sight glass. The level should be 1/8 to 1/2 full.

42 43

During During

0.5 0.3

Check the oil level in the oil level sight glass. Oil level is low. The level should be 1/4 to 3/4 full. Check the moisture indicator. It should be BLUE. Notify Field Maintenance if the moisture indicator is PINK. Record pressure hourly during operation.

44 45 46 47

During During During During

0.2 0.2 0.2 0.2

Suction Pressure Record pressure hourly during operation. Gage Oil Pressure Gage Inlet Water Temperature Reading should be 45 to 55 PSI (3.1 to 3.8 bar) above suction pressure. Record pressure hourly during operation.

DISCHARGE PRESSURE GAGE SUCTION PRESSURE GAGE OIL PRESSURE GAGE SUCTION GAS TEMPERATURE GAGE LIQUID LINE TEMPERATURE GAGE LIQUID LEVEL GAGE OIL LEVEL SIGHT GLASS MOISTURE INDICATOR COMPRESSOR

I0174T73

Figure 17.

Air Conditioning Condensing Units.

0141-18

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 48 49 50 51

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 0.2 0.5 ITEM TO BE CHECKED OR SERVICED Outlet Water Temperature Suction Gas Temperature Liquid Line Temperature REFRIGERATION CONDENSING UNITS Liquid Level Refrigerant Oil Level Sight Glass Moisture Indicator Discharge Pressure Gage EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During During During During

PROCEDURE Record pressure hourly during operation. Record pressure hourly during operation. Record pressure hourly during operation. Check the oil level in the sight glass. The level should be 1/8 to 1/2 full.

Oil level is low.

52 53

During During

0.5 0.3

Check the oil level in the oil level sight glass. Oil level is low. The level should be 1/4 to 3/4 full. Check the moisture indicator. It should be BLUE. Notify Field Maintenance if the moisture indicator is PINK. Record pressure hourly during operation.

54

During

0.2

DISCHARGE PRESSURE GAGE SUCTION PRESSURE GAGE OIL PRESSURE GAGE SUCTION GAS TEMPERATURE GAGE LIQUID LINE TEMPERATURE GAGE LIQUID LEVEL GAGE OIL LEVEL SIGHT GLASS MOISTURE INDICATOR COMPRESSOR

I0174T73

Figure 18. Refrigeration Condensing Units.

0141-19

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 55 56 57 58 59 60 61 62 63 64

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.5 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During During During During During During During During During During

PROCEDURE

Suction Pressure Record pressure hourly during operation. Gage Oil Pressure Gage Inlet Water Temperature Outlet Water Temperature Suction Gas Temperature Liquid Line Temperature Walk-in Freezer Chill Box Thaw Room BILGE MANIFOLD Reading should be 45 to 55 PSI (3.1 to 3.8 bar) above suction pressure. Record pressure hourly during operation. Record pressure hourly during operation. Record pressure hourly during operation. Record pressure hourly during operation. Record pressure hourly during operation. Record pressure hourly during operation. Record pressure hourly during operation. Visually inspect manifold for cracks, leaks, Class III leaks or loose and secure mounting. mounting.

BALLAST MANIFOLD

BALLAST VALVES

I0175T73

Figure 19. Bilge Manifold.

0141-20

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 65

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED FIRE AND GENERAL SERVICE PUMPS EQUIPMENT NOT READY/ AVAILABLE IF: Sea chest cannot be cleared, and suction pressure cannot be lowered below 10 in. Hg (254 mm Hg). Fire main discharge pressure above 120 PSI (8.3 bar) or below 60 PSI (4.1 bar). Unable to maintain general service discharge pressure as 60 PSI (4.1 bar) under normal operating conditions.

INTERVAL During

PROCEDURE a. Check pumps, couplings, and sea chest valves for proper operation. Sea chest is clogged when suction pressure is greater than 10 in. Hg (254 mm Hg). b. Check gages for normal readings. Fire main discharge pressure should be 60 to 120 PSI (4.1 to 8.3 bar) against dead head. c. General service pressure should be greater than 60 PSI (4.1 bar) under normal operating conditions.

FIRE AND GENERAL SERVICE PUMPS

BILGE MANIFOLD
I0176T73

Figure 20.

Fire and General Service Pumps.

0141-21

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 66

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

BILGE/BALLAST Visually check oil level sight gage (1/2 full). Pump is defective or fails PUMP Inspect pumps, couplings for leaks, loose to operate. connections, and damage.

BILGE/BALLAST MOTOR CONTROLLER

BILGE/BALLAST PUMP BILGE MANIFOLD

I0177T73

Figure 21. 67 During 1.0 TANK LEVEL INDICATOR RECEIVERS

Bilge/Ballast Pump. Report any differences to Field Maintenance.

Observe potable water level at local receiver. Compare reading with receiver panel in EOS.

POTABLE WATER LOCAL TANK LEVEL INDICATORS

GALLONS X 100

F.O. TANK

F.O. TANK

GALLONS X 100

POTABLE WATER MOTOR CONTROLLERS


ON ON OFF OFF

POWER
AVAILABLE

POWER
AVAILABLE

START STOP

START STOP

MANUAL

AUTO

MANUAL

AUTO

RESET

RESET

I0178T73

Figure 22.

Tank Level Indicator Receivers.

0141-22

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 68

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED BALLAST MANIFOLD EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

Visually inspect manifold for cracks, leaks, Class III leaks or loose or secure mounting. mounting.

BALLAST MANIFOLD

BALLAST VALVES

I0179T73

Figure 23. Ballast Manifold.

0141-23

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 69

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED BROMIDE FEEDER Piping EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

WARNING
Do not come in contact with water from the bromide feeder. Burns, serious injury, or death could occur. Inspect for leaks and broken, loose or missing parts.

70

During

Cartridge Check that cartridge change indicator is Change Indicator out. If indicator is lit, refer to Field Maintenance to replace cartridge.

WATER METER BROMINE FEEDER

CARTRIDGE CHANGE INDICATOR

I0180T73

Figure 24.

Bromide Feeder.

0141-24

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 71 72 73

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 0.2 ITEM TO BE CHECKED OR SERVICED VENT HOOD Hood WET/DRY VACUUM EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During During During

PROCEDURE Inspect hood for cleanliness. Clean as required. Visually check vacuum unit for signs of wear, dirt buildup, damage, and corrosion.

CUTTING Regulator valves operate smoothly. TORCH OUTFIT (OXY-ACT) STEERING HYDRAULIC POWER PACK Hydraulic Pump Unit Operate power pack in all modes and check Unit fails to operate. for leaks. Check fluid level in main deck fan room (WP 0147).

74

After

0.2

RUDDER ANGLE INDICATOR

HYDRAULIC ACCUMULATOR

STEERING HYDRAULIC POWER PACK MOTOR CONTROLLERS

330

340

320

2 1

STEERING GEAR EMERGENCY HAND PUMP


2 1 3

25 20 15 10 5 0

30 35 40 45 50 55 60

PRESSURE GAGE

STEERING HYDRAULIC POWER PACK


Figure 25. Steering Hydraulic Power Pack.

I0181T73

0141-25

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 75

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED AIR CONDITIONING CONDENSING UNITS Liquid Level Refrigerant Oil Level Sight Glass Moisture Indicator EQUIPMENT NOT READY/ AVAILABLE IF: If both units fail to operate. Oil level is low.

INTERVAL After

PROCEDURE Check the oil level in the sight glass. The level should be 1/8 to 1/2 full.

76 77

After After

0.5 0.3

Check the oil level in the oil level sight glass. Oil level is low. The level should be 1/4 to 3/4 full. Check the moisture indicator. It should be BLUE. Notify Field Maintenance if the moisture indicator is PINK.

0141-26

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 78

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED REFRIGERATION CONDENSING UNITS Liquid Level Refrigerant Oil Level Sight Glass Moisture Indicator EQUIPMENT NOT READY/ AVAILABLE IF: Oil level is low.

INTERVAL After

PROCEDURE Check the oil level in the sight glass. The level should be 1/8 to 1/2 full.

79 80

After After

0.5 0.3

Check the oil level in the oil level sight glass. Oil level is low. The level should be 1/4 to 3/4 full. Check the moisture indicator. It should be BLUE. Notify Field Maintenance if the moisture indicator is PINK.

DISCHARGE PRESSURE GAGE SUCTION PRESSURE GAGE OIL PRESSURE GAGE SUCTION GAS TEMPERATURE GAGE LIQUID LINE TEMPERATURE GAGE LIQUID LEVEL GAGE OIL LEVEL SIGHT GLASS MOISTURE INDICATOR COMPRESSOR

I0182T73

Figure 26. Refrigeration Condensing Units.

0141-27

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 81

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED FIRE AND GENERAL SERVICE PUMPS EQUIPMENT NOT READY/ AVAILABLE IF: Sea chest cannot be cleared, and suction pressure cannot be lowered below 10 in. Hg (254 mm Hg). Fire main discharge pressure above 120 PSI (8.3 bar) or below 60 PSI (4.1bar). Unable to maintain general service discharge pressure as 60 PSI (4.1 bar) under normal operating conditions.

INTERVAL After

PROCEDURE a. Check pumps, couplings, and sea chest valves for proper operation. Sea chest is clogged when suction pressure is greater than 10 in. Hg (254 mm Hg). b. Check gages for normal readings. Fire main discharge pressure should be 60 to 120 PSI (4.1 to 8.3 bar) against dead head. c. General service pressure should be greater than 60 PSI (4.1 bar) under normal operating conditions.

FIRE AND GENERAL SERVICE PUMPS

BILGE MANIFOLD
I0183T73

Figure 27.

Fire and General Service Pumps.

0141-28

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 82

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

BILGE/BALLAST Visually check oil level sight gage (1/2 full). Pump is defective or fails PUMP Inspect pumps, couplings for leaks, loose to operate. connections, and damage.

BILGE/BALLAST MOTOR CONTROLLER

BILGE/BALLAST PUMP BILGE MANIFOLD

I0184T73

Figure 28. Bilge/Ballast Pump.

0141-29

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 83 84

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 ITEM TO BE CHECKED OR SERVICED VENT HOOD Hood RUDDER ANGLE INDICATOR EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After Weekly

PROCEDURE Inspect hood for cleanliness. Clean as required. Ensure that dimmer is able to adjust light intensity. Rudder angle must align with wheel direction.

Rudder angle indicator is not operational.

RUDDER ANGLE INDICATOR

HYDRAULIC ACCUMULATOR

STEERING HYDRAULIC POWER PACK MOTOR CONTROLLERS

330

340

320

2 1

STEERING GEAR EMERGENCY HAND PUMP


2 1 3

25 20 15 10 5 0

30 35 40 45 50 55 60

PRESSURE GAGE

STEERING HYDRAULIC POWER PACK


Figure 29. Rudder Angle Indicator.

I0185T73

0141-30

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 85

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED TANK LEVEL INDICATOR RECEIVERS EQUIPMENT NOT READY/ AVAILABLE IF: Report and differences to Field Maintenance.

INTERVAL Weekly

PROCEDURE Observe potable water level at local receiver. Compare reading with receiver panel in EOS.

POTABLE WATER LOCAL TANK LEVEL INDICATORS

GALLONS X 100

F.O. TANK

F.O. TANK

GALLONS X 100

ON

ON

POTABLE WATER MOTOR CONTROLLERS

OFF

OFF

POWER
AVAILABLE

POWER
AVAILABLE

START STOP

START STOP

MANUAL

AUTO

MANUAL

AUTO

RESET

RESET

I0186T73

Figure 30.

Tank Level Indicator Receivers.

0141-31

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 86

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

POTABLE Visually inspect pumps for leaks, loose Both pumps fail to operate. WATER PUMPS connections and damage. Check discharge pressure gages for normal readings from 30 to 60 PSI (2 to 4 bar).

POTABLE WATER PIPING POTABLE WATER DISCHARGE

POTABLE WATER ELECTRIC MOTORS

POTABLE WATER PUMPS


I0187T73

Figure 31.

Potable Water Pumps.

0141-32

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 87

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED POTABLE WATER HYDROPNEUMATIC TANK EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Inspect tank, pressure gage, pressure switches, and relief valve for leaks, damage, and secure mounting.

PRESSURE GAGE AIR CHARGING CONNECTION


25 20 15 10 5 0 30 35 40 45 50 55 60

POTABLE WATER HYDRO PNEUMATIC TANK

VENT VALVE

I0188T73

Figure 32.

Potable Water Hydropneumatic Tank.

0141-33

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 88

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED STEERING GEAR EMERGENCY HAND PUMP STEERING HYDRAULIC POWER PACK Hydraulic Pump Unit Rudder Gages EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks; not securely mounted. Pump does not operate smoothly.

INTERVAL Monthly

PROCEDURE Inspect pump for secure mounting and leaks. Observe hand pump for smooth operation.

89

Monthly

0.2

Operate power pack in all modes and check Unit fails to operate. for leaks. Check fluid level in main deck fan room (WP 0147).

90 91 92

Monthly Monthly Monthly

0.2 0.2 0.5

Rudder operates full port to starboard. Lube Rudder fails to operate. rudder shafts (WP 0145). Check gages for damage and proper operation. Gages fail to operate. Motor controllers fail to operate. Obvious damage or missing or broken switches.

STEERING Inspect motor controller for obvious HYDRAULIC damage or missing or broken switches. POWER PACK MOTOR CONTROLLERS

RUDDER ANGLE INDICATOR

HYDRAULIC ACCUMULATOR

STEERING HYDRAULIC POWER PACK MOTOR CONTROLLERS

330

340

320

2 1

STEERING GEAR EMERGENCY HAND PUMP


2 1 3

25 20 15 10 5 0

30 35 40 45 50 55 60

PRESSURE GAGE

STEERING HYDRAULIC POWER PACK


I0189T73

Figure 33.

Steering Hydraulic Power Pack Motor Controllers.

0141-34

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 93

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED BILGE MANIFOLD EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks or loose mounting.

INTERVAL Monthly

PROCEDURE Visually inspect manifold for cracks, leaks and secure mounting.

BILGE/BALLAST MOTOR CONTROLLER

BILGE/BALLAST PUMP BILGE MANIFOLD

I0190T73

Figure 34. Bilge Manifold.

0141-35

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 94

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED FIRE AND GENERAL SERVICE PUMPS EQUIPMENT NOT READY/ AVAILABLE IF: Sea chest cannot be cleared, and suction pressure cannot be lowered below 10 in. Hg (254 mm Hg). Fire main discharge pressure above 120 PSI (8.3 bar) or below 60 PSI (4.1 bar). Unable to maintain general service at 50 PSI (3.45 bar) under normal operating conditions.

INTERVAL Monthly

PROCEDURE a. Check pumps, couplings, and sea chest valves for proper operation. Sea chest is clogged when suction pressure is greater than 10 in. Hg (254 mm Hg). b. Check gages for normal readings. Fire main discharge pressure should be 60 to 120 PSI (4.1 to 8.3 bar) against dead head. c. General service pressure should be greater than 60 PSI (4.1 bar) under normal operating conditions.

d. Apply 1 to 2 pumps of general purpose grease to the grease fittings located on each end of the electric motor and on the input shaft housing of the pump.

FIRE AND GENERAL SERVICE PUMPS

BILGE MANIFOLD
I0191T73

Figure 35.

Fire and General Service Pumps.

0141-36

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 95

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

BILGE/BALLAST Visually check oil level sight gage (1/2 full). Pump is defective or fails PUMP Inspect pumps, couplings for leaks, loose to operate. connections, and damage.

BILGE/BALLAST MOTOR CONTROLLER

BILGE/BALLAST PUMP BILGE MANIFOLD

I0192T73

Figure 36. Bilge/Ballast Pump. 96 Monthly 1.0 TANK LEVEL INDICATOR RECEIVERS Observe potable water level at local receiver. Compare reading with receiver panel in EOS. Report any differences to Field Maintenance.

POTABLE WATER LOCAL TANK LEVEL INDICATORS

GALLONS X 100

F.O. TANK

F.O. TANK

GALLONS X 100

ON

ON

POTABLE WATER MOTOR CONTROLLERS

OFF

OFF

POWER
AVAILABLE

POWER
AVAILABLE

START STOP

START STOP

MANUAL

AUTO

MANUAL

AUTO

RESET

RESET

I0193T73

Figure 37.

Tank Level Indicator Receivers.

0141-37

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 97

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED BALLAST MANIFOLD EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

Visually inspect manifold for cracks, leaks, Class III leaks or loose or secure mounting. mounting.

BALLAST MANIFOLD

BALLAST VALVES

I0194T73

Figure 38.

Ballast Manifold.

0141-38

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 98

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED SLIDING HYDRAULIC WATERTIGHT DOOR Oil Level EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

CAUTION
Do not operate door with pressure shutoff valves closed as this will back-pressure the local hand pump and cause the seals to rupture. Check oil level dipstick in reservoir (WP 0148). Add oil as required. Low oil level. Class III leaks exist. Unserviceable damage.

99

Monthly

0.2

Hydraulic Cylinder Assembly Control Valve Assembly

Inspect hydraulic cylinder assembly for leaks and damage.

100

Monthly

0.2

Inspect hydraulic control valve assembly for Class III leaks exist. leaks and damage. Unserviceable damage.

CONTROL VALVE ASSEMBLY

SLIDING BLEEDER VALVE TRACK WATERTIGHT DOOR

HAND CRANK

HYDRAULIC CYLINDER TRACK ROLLERS


I0195T73

Figure 39. Sliding Hydraulic Watertight Door.

0141-39

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 101

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Tracks EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

Visually inspect tracks for secure mounting Tracks damaged or not and damage. Grease rollers and tracks with mounted securely. general purpose grease. Rollers are pressure lubricated, tracks are brush lubricated. Inspect local hand pump for secure mounting and damage.

102 103

Monthly Monthly

0.2 0.2

Local Hand Pump Door

NOTE
Local hand pump may have to be operated very fast to break door loose when initially opened. Operate hand crank-operated door to full open/closed position. Door will not open and/or close fully.

CONTROL VALVE ASSEMBLY

SLIDING BLEEDER VALVE TRACK WATERTIGHT DOOR

HAND CRANK

HYDRAULIC CYLINDER TRACK ROLLERS


I0195T73

Figure 40.

Sliding Hydraulic Watertight Door.

0141-40

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 104

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED WORKSHOP TOOLS AND ASSOCIATED EQUIPMENT VENT HOOD Hood Hood Mounting ARC WELDER Labels EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Ensure that all tools, spare parts, and equipment belonging to the craft are available, clean, serviceable, and properly mounted or stowed. Inspect hood for cleanliness. Clean as required. Inspect hood for secure mounting.

105 106 107

Monthly Monthly Monthly

0.2 0.2 0.2

WARNING
Allow cooling period before servicing. Hot surfaces can cause severe burns. Inspect labels on unit for legibility. All warning labels must be clearly readable. Refer damaged or unreadable labels to Field Maintenance.

108

Monthly

0.2

Weld Cables

WARNING
Shut off power supply before removing covers. Electric shock can kill. Inspect cables for breaks in insulation. Repair or replace damaged cables. Clean and tighten connections.

109

Monthly

0.2

Internal Cleaning Vacuum dust and dirt from inside of welding machine. If dirty or dusty conditions are present, clean more frequently.

0141-41
0.2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

WORKSHOP

DRILL PRESS PIPE VISE

BENCH GRINDER ARC WELDER

WORK BENCH

BENCH VISE
I0196T73

Figure 41. Workshop Tools and Associated Equipment.

0141-42

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 110

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED DRILL PRESS Belt and Pulley EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

NOTE
Drill press housing cover must be removed. Belts worn or frayed or a. Check for worn or frayed belts, frayed electrical wiring or power cord, loose electrical connections/ connections, missing bits and pieces, worn wiring unserviceable. or damaged pulleys, dirt buildup, and corrosion. b. Check that drive belt tension is correct. If loose, refer to Field Maintenance. c. Check that spindle and motor pulleys are tight and secure.

111

Monthly

0.2

Table/Crank

a. Check that table vertical travel is smooth and unobstructed. Lubricate with general purpose grease as necessary. b. Check that 360 degree table swing is unobstructed. Lubricate with general purpose grease as necessary. c. Check that table tilts in either direction.

WORKSHOP

DRILL PRESS PIPE VISE

BENCH GRINDER ARC WELDER

WORK BENCH

BENCH VISE
I0196T73

Figure 42. Workshop Tools and Associated Equipment.

0141-43

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 112

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Spindle EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE a. Check that spindle vertical travel is smooth and unobstructed. Lubricate with SAE-30 oil as necessary. b. Lubricate side bars with general purpose grease as necessary.

113

Monthly

0.2

BENCH GRINDER Associated Equipment Wheels Spark Guard

Check that faceshields and dust masks are available and serviceable.

114 115

Monthly Monthly

0.2 0.2

Visually check that grinding wheels are serviceable. Visually check that spark guard is clear, undamaged and securely mounted.

WORKSHOP

DRILL PRESS PIPE VISE

BENCH GRINDER ARC WELDER

WORK BENCH

BENCH VISE
I0196T73

Figure 43. Workshop Tools and Associated Equipment.

0141-44

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 116 117 118 119 120

0141

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 0.2 0.2 0.2 ITEM TO BE CHECKED OR SERVICED WET/DRY VACUUM WET/DRY VACUUM WET/DRY VACUUM WET/DRY VACUUM EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly Monthly Monthly Monthly Monthly

PROCEDURE Visually check vacuum unit for signs of wear, dirt buildup, damage, and corrosion. Check accessories kit for worn and broken attachments. Check extension wands for signs of wear, damage and corrosion. Check hose for wear and serviceability.

CUTTING Inspect cylinders, regulator valves, and TORCH OUTFIT gages for obvious damage. Verify that (OXY-ACT) cylinders are properly stowed for sea. CUTTING Regulator valves operate smoothly. TORCH OUTFIT (OXY-ACT)

121

Monthly

0.2

Table 2. Equipment to Lubricate Fire and General Service Pump Electric Motor Fire and General Service Pump Hydraulic Watertight Door Rollers Hydraulic Watertight Door Tracks Drill Press Table/Crank Drill Press Spindle Drill Press Spindle Side Bars

Lubricant Specifications. Application Method Pressure Pressure Pressure Brush Brush Brush Brush

Lubricant Specification General Purpose Grease (MIL-PRF-24139) General Purpose Grease (MIL-PRF-24139) General Purpose Grease (MIL-PRF-24139) General Purpose Grease (MIL-PRF-24139) General Purpose Grease (MIL-PRF-24139) HDO-30 (M2104-3-30W) General Purpose Grease (MIL-PRF-24139)

END OF TASK END OF WORK PACKAGE

0141-45/46 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00006)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION SHAFT ALLEYS

0142

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0142-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00007)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0142

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED Port Propeller Shaft Seals EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Inspect stern tube and bulkhead seals for leaks. The maximum allowable leakage is 1 GPM (3.79 LPM) when vessel is underway. The maximum allowable leakage is 1/2 GPM (1.89 LPM) with the boot seal inflated. Inspect stern tube and bulkhead seals for leaks. The maximum allowable leakage is 1 GPM (3.79 LPM) when vessel is underway. The maximum allowable leakage is 1/2 GPM (1.89 LPM) with the boot seal inflated.

Before

0.3

Starboard Propeller Shaft Seals

SHAFT SEAL VENT

BOOT

I0197T73

Figure 1.

Starboard Propeller Shaft Seals.

0142-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00007)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 3

0142

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED Port Propeller Shaft Seals EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE Inspect stern tube and bulkhead seals for leaks. The maximum allowable leakage is 1 GPM (3.79 LPM) when vessel is underway. The maximum allowable leakage is 1/2 GPM (1.89 LPM) with the boot seal inflated. Inspect stern tube and bulkhead seals for leaks. The maximum allowable leakage is 1 GPM (3.79 LPM) when vessel is underway. The maximum allowable leakage is 1/2 GPM (1.89 LPM) with the boot seal inflated.

During

0.3

Starboard Propeller Shaft Seals

SHAFT SEAL VENT

BOOT

I0197T73

Figure 2.

Starboard Propeller Shaft Seals.

0142-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00007)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 5

0142

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED Port Propeller Shaft Seals EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Inspect stern tube and bulkhead seals for leaks. The maximum allowable leakage is 1 GPM (3.79 LPM) when vessel is underway. The maximum allowable leakage is 1/2 GPM (1.89 LPM) with the boot seal inflated. Inspect stern tube and bulkhead seals for leaks. The maximum allowable leakage is 1 GPM (3.79 LPM) when vessel is underway. The maximum allowable leakage is 1/2 GPM (1.89 LPM) with the boot seal inflated.

Weekly

0.3

Starboard Propeller Shaft Seals

0142-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00007)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0142

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

SHAFT SEAL VENT

BOOT

I0197T73

Figure 3.

Starboard Propeller Shaft Seals.

END OF TASK END OF WORK PACKAGE

0142-5/6 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00007)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION BOW THRUSTER COMPARTMENT

0143

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0143-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00008)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0143

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


ITEM TO BE CHECKED OR SERVICED BOW THRUSTER Oil Level EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Check for oil level and water contamination in sight glass Water in oil. on the lube oil tank. Level should be between the high and low level marks. Add EP 68 as necessary to maintain oil level 1/2 way up in sight glass.

BOW THRUSTER LUBE OIL TANK

SIGHT GLASS

I0198T73

Figure 1.

Bow Thruster.

0143-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00008)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 2

0143

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


ITEM TO BE CHECKED OR SERVICED BOW THRUSTER Leaks Inspect for oil leaks. EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks.

INTERVAL During

PROCEDURE

During

Eductor Pressure Check gages for loose connections and damage. Gages

50 40 30 20 10 0

60 70 80 90 100

EDUCTOR PRESSURE GAGE

I0199T73

Figure 2.

Eductor Pressure Gages.

0143-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00008)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 4

0143

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


ITEM TO BE CHECKED OR SERVICED BOW THRUSTER Oil Level Leaks EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

Check for oil level and water contamination in sight glass Water in oil. on the lube oil tank Level should be between the high and low level marks. Add EP 68 as necessary to maintain oil level 1/2 way up in sight glass. Inspect for oil leaks. Class III leaks.

Monthly

BOW THRUSTER LUBE OIL TANK

SIGHT GLASS

I0198T73

Figure 3.

Bow Thruster.

0143-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00008)

TM 55-1925-273-10-4

0143

Table 2. Equipment Lubricated Bow Thruster Engine Crankcase Bow Thruster Gear Box END OF TASK END OF WORK PACKAGE

Lubricant Specifications. Lubricant Oil OE/HDO-30 (M2104-3-30W) Oil 2EP68 Dry

0143-5/6 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00008)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION TOWING GEAR LOCKER

0144

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0144-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00009)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0144

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED TOWING GEAR LOCKER Stowage EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING
Towing gear and equipment must be properly stowed. Failure to comply can result in puncturing or other damage to tanks and voids while at sea. Check that all towing equipment is properly stowed and secured for sea.

2 3

Before After

0.1 0.2

Bilge Stowage

Verify that the bilge is pumped and all voids are empty.

WARNING
Towing gear and equipment must be properly stowed. Failure to comply can result in puncturing or other damage to tanks and voids while at sea. Check that all towing equipment is properly stowed and secured for sea.

Monthly

0.2

Stowage

WARNING
Towing gear and equipment must be properly stowed. Failure to comply can result in puncturing or other damage to tanks and voids while at sea. Check that all towing equipment is properly stowed and secured for sea.

0144-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00009)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0144

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

REMOVABLE PLANKS

TOWING GEAR STORAGE BINS


Figure 1. Towing Gear Locker

BILGE
I0200T73

END OF TASK END OF WORK PACKAGE

0144-3/4 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00009)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION STEERING GEAR COMPARTMENT

0145

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0145-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00010)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0145

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED STEERING GEAR COMPART MENT Steering Gear Rudder Motors EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Visually inspect unit for damaged, loose, or Class III leaks or damaged missing parts or leaks. or missing parts. Fails to operate properly.

RUDDER MOTORS

I0201T73

Figure 1.

Steering Gear Compartment.

0145-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00010)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 2

0145

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Tow Pin Valves EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Check hydraulic connections for leaks and Class III leaks or damaged check lines for damage. or missing parts. Fails to operate properly. Check hydraulic connections for leaks and Class III leaks or damaged check lines for damage. or missing parts. Fails to operate properly. Check hydraulic connections for leaks and Class III leaks or damaged check lines for damage. or missing parts. Fails to operate properly.

After

0.2

Tow Pin Valves

Weekly

0.2

Tow Pin Valves

TOW PIN FLOW CONTROL VALVE

TOW PIN VALVES


Figure 2. Steering Gear Compartment.

I0202T73

0145-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00010)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 5

0145

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED Steering Gear Rudder Motors EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

Visually inspect unit for damaged, loose, or Class III leaks or damaged missing parts or leaks. or missing parts. Fails to operate properly.

RUDDER MOTORS

I0203T73

Figure 3.

Steering Gear Compartment.

0145-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00010)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 6

0145

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 2.0 ITEM TO BE CHECKED OR SERVICED Steering Gear Rudder Shafts EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Grease rudder shafts with general purpose grease.

TILLER RUDDER SHAFT


Figure 4. Steering Gear Compartment

I0204T73

END OF TASK END OF WORK PACKAGE

0145-5/6 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00010)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION FANTAIL

0146

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0146-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00011)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0146

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.4 ITEM TO BE CHECKED OR SERVICED EXTERNAL STRUCTURE EQUIPMENT NOT READY/ AVAILABLE IF: Watertight integrity or operational capability is impaired.

INTERVAL Before

PROCEDURE Inspect for structural damage.

TOWING GEAR LOCKER

H-BITT

DOUBLE BITT

SHORE POWER CONNECTION

WATERTIGHT DOOR TO VESTIBULE AMS 2 HATCH

FANTAIL

FWD

MANHOLE COVER

TOWING GEAR H-BITT


Figure 1.

DOUBLE BITT
I0205T73

External Structure.

0146-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00011)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 2

0146

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

SHORE POWER Visually check terminal box (exterior) for CONNECTOR damage and corrosion. Ensure that receptacle is securely fastened. SHORE POWER CONNECTOR

Before

0.2

WARNING
Do not disconnect the shore power cable when shore power operation is in progress. High voltages could cause injury or death. Visually check cable connectors (internal) for damage and corrosion.

Before

0.4

SHORE POWER a. Visually check condition of cable. CABLE Check for cracked or damaged insulation. b. Check condition of cable connection. Ensure that connector is protected from moisture, dirt buildup, and corrosion.

SHORE POWER CONNECTION

SHORE POWER PLUG

SHORE POWER CABLE


I0206T73

Figure 2. Shore Power Cable.

0146-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00011)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 5

0146

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED SHORE POWER CONNECTOR EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

WARNING
Do not disconnect the shore power cable when shore power operation is in progress. High voltages could cause injury or death. Visually check terminal box (exterior) for damage and corrosion. Ensure that receptacle is securely fastened.

SHORE POWER CONNECTION

SHORE POWER PLUG

SHORE POWER CABLE


I0206T73

Figure 3.

Shore Power Connector.

0146-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00011)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 6

0146

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.4 ITEM TO BE CHECKED OR SERVICED EXTERNAL STRUCTURE HATCH AND VENT/COVER GASKETS EQUIPMENT NOT READY/ AVAILABLE IF: Watertight integrity or operational capability is impaired. Watertight integrity or operational capability is impaired.

INTERVAL Weekly

PROCEDURE Inspect for structural damage.

Weekly

0.4

Check that gaskets are clean and serviceable.

TOWING GEAR LOCKER

H-BITT

DOUBLE BITT

SHORE POWER CONNECTION

WATERTIGHT DOOR TO VESTIBULE FANTAIL AMS 2 HATCH

FWD

MANHOLE COVER

TOWING GEAR H-BITT

DOUBLE BITT
I0207T73

Figure 4. Hatch and Vent/Cover Gaskets.

0146-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00011)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 8 9 10 11

0146

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 0.2 0.2 ITEM TO BE CHECKED OR SERVICED DOUBLE BITTS Port Double Bitt Starboard Double Bitt H-BITTS Port H-bitt Starboard H-bitt EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly Monthly Monthly Monthly

PROCEDURE

Inspect double bitt for secure mounting and Structural cracks or damage. damage in foundation. Inspect double bitt for secure mounting and Structural cracks or damage. damage in foundation. Inspect H-bitt for secure mounting and damage. Inspect H-bitt for secure mounting and damage. Structural cracks or damage in foundation. Structural cracks or damage in foundation.

TOWING GEAR LOCKER

H-BITT

DOUBLE BITT

SHORE POWER CONNECTION

WATERTIGHT DOOR TO VESTIBULE FANTAIL AMS 2 HATCH

FWD

MANHOLE COVER

TOWING GEAR H-BITT


Figure 5.

DOUBLE BITT
I0207T73

H-bitts.

12

Monthly

0.2

SHORE POWER Visually check terminal box (exterior) for CONNECTOR damage and corrosion. Ensure that receptacle is securely fastened.

0146-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00011)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 13

0146

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED SHORE POWER CABLE EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

WARNING
Do not disconnect the shore power cable when shore power operation is in progress. High voltages could cause injury or death. Visually check condition of cable. Check for cracked or damaged insulation.

14

Monthly

0.2

Check condition of cable connection. Ensure connector is protected from moisture, dirt buildup, and corrosion.

SHORE POWER CONNECTION

SHORE POWER PLUG

SHORE POWER CABLE


I0208T73

Figure 6. Shore Power Cable.

END OF TASK END OF WORK PACKAGE

0146-7/8 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00011)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION FAN ROOM, MAIN DECK

0147

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0147-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1 2

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.2 0.1 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before Before

PROCEDURE

SUPPLY AND Check units for unusual noises or excessive Fails to operate. EXHAUST FANS vibrations. PREHEATER Inspect unit for obvious damage. Fails to operate.

AMS VENTILATION FAN GALLEY VENTILATION PREHEATER


I0209T73

Figure 1. Exhaust Fans / Preheater.

0147-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 3

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED ROOM DOOR ALARM EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

NOTE
Notify pilothouse that alarm is to be tested. Open door and verify that both alarms (buzzer and light) operate.

FAN ROOM DOOR ALARM

ALARM SWITCH BOARD LOCATED IN THE PILOTHOUSE

FAN ROOM DOOR OPEN INDICATOR

I0210T73

Figure 2.

Room Door Alarm.

0147-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 4

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED FAN COIL UNIT EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

a. Observe unit for unusual noises or Fails to operate. excessive vibration. b. Grease four grease fittings with 1 to 2 shots per fitting of general purpose grease.

GREASE FITTINGS

REHEATER
Figure 3.

FAN COIL UNIT


I0211T73

Fan Coil Unit.

0147-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 5

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED REFRIGERATION PIPING EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Inspect refrigeration piping for leaks.

REFRIGERATION VALVES AND PIPING

I0212T73

Figure 4. Refrigeration Piping.

0147-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 6

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED STEERING GEAR HEAD TANK level. b. Push in on the handles to the oil level in the sight glasses. Add hydraulic fluid (OH 46 AW) as necessary to maintain the sight glasses at 1/2 full. EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

a. Visually inspect tank for leaks and Class III leaks.

STEERING GEAR HEAD TANK FILL CAP

SIGHT GLASS

SIGHT GLASS

HANDLES
Figure 5. Steering Gear Head Tank.

I0213T73

0147-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 7

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

SUPPLY AND Check units for unusual noises or excessive Fails to operate. EXHAUST FANS vibrations.

AMS VENTILATION FAN GALLEY VENTILATION PREHEATER


I0214T73

Figure 6.

Supply and Exhaust Fans.

0147-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 8

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED FAN COIL UNIT EQUIPMENT NOT READY/ AVAILABLE IF: Fails to operate.

INTERVAL During

PROCEDURE Observe unit for unusual noises or excessive vibration.

GREASE FITTINGS

REHEATER
Figure 7.

FAN COIL UNIT


I0215T73

Fan Coil Unit.

0147-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 9

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED REFRIGERATION PIPING EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE Inspect refrigeration piping for leaks.

REFRIGERATION VALVES AND PIPING

I0216T73

Figure 8. Refrigeration Piping.

0147-9

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 10

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED STEERING GEAR HEAD TANK level. b. Push in on the handles to the oil level in the sight glasses. Add hydraulic fluid (OH 46 AW) as necessary to maintain the sight glasses at 1/2 full. EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

a. Visually inspect tank for leaks and Class III leaks.

STEERING GEAR HEAD TANK FILL CAP

SIGHT GLASS

SIGHT GLASS

HANDLES
Figure 9. Steering Gear Head Tank.

I0217T73

0147-10

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 11

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED ROOM DOOR ALARM EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

NOTE
Notify pilothouse that alarm is to be tested. Open door and verify that both alarms (buzzer and light) operate.

FAN ROOM DOOR ALARM

ALARM SWITCH BOARD LOCATED IN THE PILOTHOUSE

FAN ROOM DOOR OPEN INDICATOR

I0218T73

Figure 10.

Room Door Alarm.

0147-11

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 12

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED PREHEATER EQUIPMENT NOT READY/ AVAILABLE IF: Fails to operate.

INTERVAL Monthly

PROCEDURE Inspect unit for obvious damage.

AMS VENTILATION FAN GALLEY VENTILATION PREHEATER


I0219T73

Figure 11.

Preheater.

0147-12

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 13

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED FAN COIL UNIT EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

a. Observe unit for unusual noises or Fails to operate. excessive vibration. b. Grease four grease fittings with 1-2 shots per fitting of general purpose grease.

GREASE FITTINGS

REHEATER

FAN COIL UNIT


I0220T73

Figure 12. Fan Coil Unit.

0147-13

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 14

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED REFRIGERATION PIPING EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Inspect refrigeration piping for leaks.

REFRIGERATION VALVES AND PIPING

I0221T73

Figure 13.

Refrigeration Piping.

0147-14

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 15

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED STEERING GEAR HEAD TANK level. b. Push in on the handles to the oil level in the sight glasses. Add hydraulic fluid (OH 46 AW) as necessary to maintain the sight glasses at 1/2 full. EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

a. Visually inspect tank for leaks and Class III leaks.

STEERING GEAR HEAD TANK FILL CAP

SIGHT GLASS

SIGHT GLASS

HANDLES
Figure 14. Steering Gear Head Tank.

I0222T73

0147-15

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 16

0147

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

Semi-Annual 0.2

SUPPLY AND Grease two fittings on fan housing with 1-2 EXHAUST FANS shots per fitting of general purpose grease.

GREASE FITTINGS

AMS VENTILATION FAN

GALLEY VENTILATION PREHEATER


I0223T73

Figure 15.

Supply and Exhaust Fans.

0147-16

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4

0147

Table 2. Item Lubricated Fan Coil Unit Steering Gear Head Tank Supply and Exhaust Fans END OF TASK END OF WORK PACKAGE

Lubrication Specifications. Military Specification MIL-PRF-24139

Lubricant Grease, General Purpose Oil 46AW Grease, General Purpose

MIL-PRF-24139

0147-17/18 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00012)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION MAIN DECK VESTIBULE

0148

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0148-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00013)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0148

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks or components not securely mounted.

INTERVAL Before

PROCEDURE

AMS 2 Inspect for leaks and secure mounting. WATERTIGHT Check oil level. Add oil (OE/HDO-40) as DOOR REMOTE required. HAND PUMP STATION Hand Pump and Reservoir Hand Pump Crew's Mess

Before

0.2

Operate the hand pump to close the door Door does not operate. and ensure smooth operation of the pump and correct operation of the door. Check for leaks.

AMS 2 WATERTIGHT DOOR RESERVOIR, LOCATED IN THE VESTIBULE

AMS 2 WATERTIGHT DOOR HAND CRANK LOCATED IN THE CREW'S MESS HAND CRANK

I0224T73

Figure 1. 3 Before 0.2

AMS 2 Watertight Door Remote Hand Pump Station. Inspect panels for obvious damage or missing or broken switches. Any damage which could affect operation.

EMERGENCY STOP SWITCHES Fuel Oil Pumps Engine Room Ventilation AMS 1 Fans

4 5

Before Before

0.2 0.2

Inspect panels for obvious damage or missing or broken switches. Inspect panels for obvious damage or missing or broken switches.

Any damage which could affect operation. Any damage which could affect operation.

0148-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00013)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 6

0148

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED AMS 2 Fans EQUIPMENT NOT READY/ AVAILABLE IF: Any damage which could affect operation.

INTERVAL Before

PROCEDURE Inspect panels for obvious damage or missing or broken switches.

EMERGENCY STOP AMS 1 SUPPLY FAN EMERGENCY STOP AMS 2 SUPPLY FAN EMERGENCY STOP HVAC

ENGINE ROOM SUPPLY AND EXHAUST FANS

EMERGENCY STOP FUEL/OIL TRANSFER PUMP NUMBER 2 EMERGENCY STOP FUEL/OIL TRANSFER PUMP NUMBER 1
I0225T73

Figure 2.

Emergency Stop Switches.

0148-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00013)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 7

0148

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks or components not securely mounted.

INTERVAL During

PROCEDURE

AMS 2 Inspect for leaks and secure mounting. WATERTIGHT Check oil level. Add oil (OE/HDO-40) as DOOR REMOTE required. HAND PUMP STATION Hand Pump and Reservoir Hand Pump

During

0.2

Operate the hand pump to close the door Door does not operate. and ensure smooth operation of the pump and correct operation of the door. Check for leaks.

AMS 2 WATERTIGHT DOOR RESERVOIR, LOCATED IN THE VESTIBULE

AMS 2 WATERTIGHT DOOR HAND CRANK LOCATED IN THE CREW'S MESS HAND CRANK

I0226T73

Figure 3. 9 During 0.2

AMS 2 Watertight Door Remote Hand Pump Station. Inspect panels for obvious damage or missing or broken switches. Any damage which could affect operation.

EMERGENCY STOP SWITCHES Fuel Oil Pumps Engine Room AMS 1 Fans

10 11

During During

0.2 0.2

Inspect panels for obvious damage or missing or broken switches. Inspect panels for obvious damage or missing or broken switches.

Any damage which could affect operation. Any damage which could affect operation.

0148-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00013)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 12

0148

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED AMS 2 Fans EQUIPMENT NOT READY/ AVAILABLE IF: Any damage which could affect operation.

INTERVAL During

PROCEDURE Inspect panels for obvious damage or missing or broken switches.

EMERGENCY STOP AMS 1 SUPPLY FAN EMERGENCY STOP AMS 2 SUPPLY FAN EMERGENCY STOP HVAC

ENGINE ROOM SUPPLY AND EXHAUST FANS

EMERGENCY STOP FUEL/OIL TRANSFER PUMP NUMBER 2 EMERGENCY STOP FUEL/OIL TRANSFER PUMP NUMBER 1
I0225T73

Figure 4.

Emergency Stop Switches.

0148-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00013)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 13

0148

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: Class III leaks or components not securely mounted.

INTERVAL Weekly

PROCEDURE

AMS 2 Inspect for leaks and secure mounting. WATERTIGHT Check oil level. Add oil (OE/HDO-40) as DOOR REMOTE required. HAND PUMP STATION Hand Pump and Reservoir Hand Pump

14

Weekly

0.2

Operate the hand pump to close the door Door does not operate. and ensure smooth operation of the pump and correct operation of the door. Check for leaks.

AMS 2 WATERTIGHT DOOR RESERVOIR, LOCATED IN THE VESTIBULE

AMS 2 WATERTIGHT DOOR HAND CRANK LOCATED IN THE CREW'S MESS HAND CRANK

I0224T73

Figure 5. 15 Weekly 0.2

AMS 2 Watertight Door Remote Hand Pump Station. Inspect panels for obvious damage or missing or broken switches. Any damage which could affect operation.

EMERGENCY STOP SWITCHES Fuel Oil Pumps Engine Room Ventilation AMS 1 Fans

16 17

Weekly Weekly

0.2 0.2

Inspect panels for obvious damage or missing or broken switches. Inspect panels for obvious damage or missing or broken switches.

Any damage which could affect operation. Any damage which could affect operation.

0148-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00013)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 18

0148

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED AMS 2 Fans EQUIPMENT NOT READY/ AVAILABLE IF: Any damage which could affect operation.

INTERVAL Weekly

PROCEDURE Inspect panels for obvious damage or missing or broken switches.

EMERGENCY STOP AMS 1 SUPPLY FAN EMERGENCY STOP AMS 2 SUPPLY FAN EMERGENCY STOP HVAC

ENGINE ROOM SUPPLY AND EXHAUST FANS

EMERGENCY STOP FUEL/OIL TRANSFER PUMP NUMBER 2 EMERGENCY STOP FUEL/OIL TRANSFER PUMP NUMBER 1
I0225T73

Figure 6.

Emergency Stop Switches.

0148-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00013)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 19

0148

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED Towing Machine Control Panel EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Visually inspect for physical damage, and check the programmable controller for fault indication lights.

PROGRAMMABLE CONTROLLER

TOWING MACHINE CONTROL PANEL

INDICATOR LIGHTS

I0227T73

Figure 7.

Towing Machine Control Panel.

0148-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00013)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 20

0148

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

AMS 2 Check oil level on dipstick and add oil (OE/ WATERTIGHT HDO-40) as required. DOOR REMOTE HAND PUMP STATION Reservoir

AMS 2 WATERTIGHT DOOR RESERVOIR, LOCATED IN THE VESTIBULE

AMS 2 WATERTIGHT DOOR HAND CRANK LOCATED IN THE CREW'S MESS HAND CRANK

I0224T73

Figure 8.

AMS 2 Watertight Door Remote Hand Pump Station.

Table 2. Item Lubricated Sliding Hydraulic Watertight Door END OF TASK END OF WORK PACKAGE

Lubrication Specifications. Military Specification MIL-PRF-2104

Lubricant Oil OE/HDO-40

0148-9/10 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00013)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION MESS/RECREATION ROOM

0149

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0149-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED TOASTER EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING

Unplug the toaster before cleaning. Servicing an energized toaster can result in serious injury or death. Visually inspect for damage or missing parts.

TOASTER

I0228T73

Figure 1. Toaster.

0149-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 2

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED COFFEE PERCOLATOR Power Cord Pump Tube EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Inspect power cord and plug for cracks in Bare wires or damaged insulation or other damage. Place out of plug. service if bare wires are exposed or if plug is damaged. Repair as soon as practical.

Before

0.2

CAUTION
Do not immerse percolator. Damage to the unit will result. Ensure that the washer in the base of the pump tube remains loose. Remove all coffee grounds by using running water or a toothpick.

Before

0.2

Exterior

Clean the exterior using warm soapy water and clean cloth. Wipe dry with clean soft cloth.

COFFEE PERCOLATOR

PUMP TUBE

POWER CORD
I0229T73

Figure 2. Coffee Percolator.

0149-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 5

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED BEVERAGE DISPENSER Clean Bowl EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Visually inspect unit for damage. Wash bowl in soapy water. Rinse with clean water and wipe dry with soft cloth.

BOWL COVER

BOWL

BOWL

SPRAY SWITCH
S ON RE ON IG F FR OF AY FF PR O

HANDLE BEVERAGE DISPENSER


I0230T73

REFRIGERATION SWITCH

Figure 3.

Beverage Dispenser.

0149-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 6

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MILK DISPENSER Dispenser Valve EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Inspect valves to ensure that they are secure on valve holders.

DOOR LATCH THERMOMETER

DISPENSER VALVE TEMPERATURE CONTROL SWITCH


6 1 7

4 3 2 5

I0231T73

Figure 4. Milk Dispenser.

0149-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 7

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MINIREFRIGERATOR EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Visually inspect refrigerator for damage or missing parts.

THERMOSTAT

MINI REFRIGERATOR
I0232T73

Figure 5. Mini Refrigerator.

0149-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 8

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED ICE MAKER EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

CAUTION
Ice maker must not be operated without exterior panels installed. Damage to unit could result. Visually inspect unit for damage or missing parts. Verify that exterior panels are installed.

ICE MAKER

MANUAL HARVEST SWITCH PURGE SWITCH ON/OFF/CLEAN SWITCH


I0233T73

Figure 6. Ice Maker.

0149-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 9 10

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 0.2 ITEM TO BE CHECKED OR SERVICED TELEVISION AND VCR MILK DISPENSER Exterior Dispenser Valve Compressor EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before During

PROCEDURE Inspect for secure mounting and obvious damage. Check cabinet each day for cleanliness.

11 12

During During

0.2 0.2

Inspect valves to ensure they are secure on valve holders. Inspect for proper operation of compressor. Report abnormal compressor noises to Field Maintenance.

DOOR LATCH THERMOMETER

DISPENSER VALVE TEMPERATURE CONTROL SWITCH


6 1 7

4 3 2 5

I0231T73

Figure 7.

Milk Dispenser.

0149-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 13 14

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 0.2 ITEM TO BE CHECKED OR SERVICED TELEVISION AND VCR TOASTER Exterior Surface EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During After

PROCEDURE Inspect for secure mounting and obvious damage.

WARNING

Unplug the toaster before cleaning. Servicing an energized toaster can result in serious injury or death. Wipe off exterior using damp rag. 15 After 0.2 Crumb Tray Remove crumb tray, empty, clean, and replace.

TOASTER

I0228T73

Figure 8. Toaster.

0149-9

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 16

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MICROWAVE OVEN Exterior Surface EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

CAUTION
Never use abrasive or harsh cleaners or scouring pads. Damage to oven will result. Clean the outside of the oven of grease and soil buildup with mild soap and water; rinse and dry with a soft cloth. Do not use any type of household or abrasive cleaner.

17

After

0.2

Interior Surfaces

Check the interior surfaces for grease and soil buildup, wipe with soft cloth and warm water. Wipe wave guide cover in ceiling of oven with soft damp cloth to remove food. For heavier soil, use baking soda or mild soap; Rinse thoroughly with hot water and wipe dry. Check for odors. Odors can be eliminated from inside of the oven by boiling a solution of one cup of water and several tablespoons of lemon juice in the oven for 5 to 7 minutes. Wipe out excess moisture after every use.

18

After

0.2

Oven

MICROWAVE OVEN

DOOR

TOUCH CONTROL PANEL

OVEN

TURNTABLE SUPPORT TURNTABLE


I0234T73

Figure 9. Microwave Oven.

0149-10

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 19

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MICROWAVE OVEN Turntable/ Turntable Support EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

CAUTION
Handle turntable support carefully. If dropped, damage to turntable support will result. Remove turntable and turntable support for cleaning. Clean floor of oven with mild soap and water; rinse and dry with a soft cloth. Clean turntable and support in mild soapy water or in dishwasher. Dry with a soft cloth.

20

After

0.2

Touch Control Panel

CAUTION
Oven door must be open when cleaning touch control panel to prevent oven operation. Operation of oven without any contents will result in permanent damage to oven. Clean vents by wiping with soft cloth. Open oven door. Wipe panel with a cloth dampened slightly with water only and dry with a soft cloth. Avoid use of excess water.

21 22

After After

0.2 0.2

Vents Door

MICROWAVE OVEN

DOOR

TOUCH CONTROL PANEL

OVEN

TURNTABLE SUPPORT TURNTABLE


I0234T73

Figure 10. Microwave Oven.

0149-11

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 23

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED BEVERAGE DISPENSER Clean Bowl Exterior Condenser EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE Visually inspect unit for damage. Wash bowl in soapy water. Rinse with clean water and wipe dry with soft cloth. Clean exterior using clean cloth and soapy water. Wipe dry with clean soft cloth.

24 25

After Weekly

0.2 0.2

WARNING

Electrical shock hazard. Shut off the power before proceeding. Electrocution can result in serious injury or death. Remove front and side panels from unit. Clean condenser fins using a vacuum cleaner. Install front and side panels.

BOWL COVER

BOWL

BOWL

SPRAY SWITCH
S ON RE ON IG F FR OF AY FF PR O

HANDLE BEVERAGE DISPENSER


I0230T73

REFRIGERATION SWITCH

Figure 11.

Beverage Dispenser.

0149-12

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 26

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MILK DISPENSER Duct Panel Condenser EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Inspect air duct panel and beneath unit for restrictions. Remove rear panel and clean condenser area.

27

Weekly

0.2

DOOR LATCH THERMOMETER

DISPENSER VALVE TEMPERATURE CONTROL SWITCH


6 1 7

4 3 2 5

I0231T73

Figure 12. Milk Dispenser.

0149-13

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 28

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MINIREFRIGERATOR Cleanliness EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Visually inspect refrigerator for damage or missing parts. Inspect interior and exterior for cleanliness. Clean using clean rag and soapy water. Rinse with clear water and wipe dry with clean soft cloth.

29

Weekly

0.2

THERMOSTAT

MINI REFRIGERATOR
I0232T73

Figure 13.

Mini-Refrigerator.

0149-14

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 30

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED ICE MAKER Exterior Surface EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

CAUTION
Ice maker must not be operated without exterior panel installed. Damage to unit could result. Clean exterior of unit using soapy water and clean rag. Rinse with clear water and wipe dry with clean soft cloth.

ICE MAKER

MANUAL HARVEST SWITCH PURGE SWITCH ON/OFF/CLEAN SWITCH


I0233T73

Figure 14. Ice Maker.

0149-15

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 31

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED COFFEE PERCOLATOR Power Cord Pump Tube EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Inspect power cord and plug for cracks in insulation or other damage. Place out of service if bare wires are exposed or if plug is damaged. Repair as soon as practical.

32

Monthly

0.2

CAUTION
Do not immerse percolator. Damage to the unit will result. Ensure that the washer in the base of the pump tube remains loose. Remove all coffee grounds by using running water or a toothpick.

COFFEE PERCOLATOR

PUMP TUBE

POWER CORD
I0229T73

Figure 15.

Coffee Percolator.

0149-16

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 33

0149

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED ICE MAKER Air Filter EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

CAUTION
Ice maker must not be operated without exterior panels installed. Damage to unit could result. Remove lower front panel by removing two screws and pulling out on bottom of panel. Remove condenser air filter. Wash in soapy water, rinse, and shake out excess water and replace. Install cover and secure with two screws.

ICE MAKER

MANUAL HARVEST SWITCH PURGE SWITCH ON/OFF/CLEAN SWITCH


I0233T73

Figure 16. Ice Maker.

END OF TASK END OF WORK PACKAGE

0149-17/18 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00014)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION GALLEY

0150

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

Table 1.
ITEM NO. 1

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED TRASH COMPACTOR EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Visually inspect compactor for damaged or missing parts.

KEY SWITCH

TRASH COMPACTOR
PULL

START BUTTON HANDLE LOAD DOOR HANDLE DOOR


I0235T73

Figure 1. Trash Compactor.

0150-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 2

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MARINE FREEZER AND REFRIGERATOR Condenser Coil EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Inspect condenser coil to make certain that air flow is not hampered and that it is clear of dust and debris.

EVAPORATOR MOTOR

DOOR

EVAPORATOR FAN THERMOMETER


SCREWS HINGE COVER

CONDENSER COIL CONDENSER FAN

GASKET

CONDENSER MOTOR

MARINE FREEZER AND REFRIGERATOR

MARINE FREEZER AND REFRIGERATOR (DOOR)


I0236T73

Figure 2.

Marine Freezer and Refrigerator.

0150-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 3 4 5

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 0.2 ITEM TO BE CHECKED OR SERVICED Drain Line Interior Liner Condenser and Evaporator Fan Motors Door Gaskets EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before Before Before

PROCEDURE Inspect and check that drain line is unstopped. Check that interior liner is clean and dry. Check both the condenser fan motor and the evaporator fan motor to make certain that they are operational and that the fans are tight and secure. Check that door gaskets are clean and serviceable.

6 7

Before Before

0.2 0.2

Exterior Surfaces Check that exterior surfaces are clean and dry.

EVAPORATOR MOTOR

DOOR

EVAPORATOR FAN THERMOMETER


SCREWS HINGE COVER

CONDENSER COIL CONDENSER FAN

GASKET

CONDENSER MOTOR

MARINE FREEZER AND REFRIGERATOR

MARINE FREEZER AND REFRIGERATOR (DOOR)


I0236T73

Figure 3. Marine Freezer and Refrigerator.

0150-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 8

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED WALK-IN FREEZER Freezer Alarm Condenser Coil EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Check room temperature at thermostat. Temperature out of range. Temperature should be -4F to 0F (-20C to -18C). Visually inspect for damage or missing parts. Inspect condenser coil to make certain that air flow is not hampered and that it is clear of dust and debris. Inspect and check that the deck drains are serviceable. Check that interior shelving is clean and dry. Visually inspect the evaporator fan motors to make certain that they are operational and that the fans are tight and secure. Check that door gaskets are clean and serviceable.

9 10

Before Before

0.2 0.2

11 12 13

Before Before Before

0.2 0.2 0.2

Deck Drains Interior Shelving Evaporator Fan Motors Door Gaskets

14

Before

0.2

DOOR

SCREWS

HINGE COVER

DRAIN LINE

EVAPORATOR FANS AND MOTOR CHILL BOX

DRAIN LINE

GASKET

CHILL BOX (DOOR)


I0238T73

Figure 4. Walk-In Freezer.

0150-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 15

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED CHILL BOX EQUIPMENT NOT READY/ AVAILABLE IF: Temperature out of range.

INTERVAL Before

PROCEDURE Check room temperature at thermostat. Temperature should be 33F to 37F (1C to 2C). Visually inspect for damage or missing parts. Inspect condenser coil to make certain that air flow is not hampered and that it is clear of dust and debris. Inspect and check that the deck drains are serviceable. Check that interior shelving is clean and dry. Visually inspect the evaporator fan motors to make certain that they are operational and that the fans are tight and secure. Check that door gaskets are clean and serviceable.

16 17

Before Before

0.2 0.2

Refrigerator Alarm Condenser Coil

18 19 20

Before Before Before

0.2 0.2 0.2

Deck Drains Interior Shelving Evaporator Fan Motors Door Gaskets

21

Before

0.2

DOOR

SCREWS

HINGE COVER

DRAIN LINE

EVAPORATOR FANS AND MOTOR CHILL BOX

DRAIN LINE

GASKET

CHILL BOX (DOOR)


I0240T73

Figure 5. Chill Box.

0150-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 22 23

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 0.2 ITEM TO BE CHECKED OR SERVICED SERVING LINE/ STEAM TABLE EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before Before

PROCEDURE Visually inspect unit for damage.

Exterior Surfaces Inspect exterior for cleanliness. Clean exterior using warm soapy water and clean cloth. Wipe dry with clean soft cloth.

STEAM TABLE SINK WALLS

HEATER SWITCHES DRAIN VALVES


Figure 6.
I0253T73

Serving Line/Steam Table.

0150-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 24

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED COFFEE PERCOLATOR Power Cord Pump Tube EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Inspect power cord and plug for cracks in insulation or other damage. Place out of service if bare wires are exposed or if plug is damaged. Do not immerse percolator. Damage to the unit will result.

25

Before

0.2

COFFEE PERCOLATOR

PUMP TUBE

POWER CORD
I0243T73

Figure 7. Coffee Percolator.

0150-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 26

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Cleaning EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Ensure that the washer in the base of the pump tube remains loose. Remove all coffee grounds by using running water or a toothpick. Clean the exterior using warm soapy water and clean cloth. Wipe dry with clean soft cloth.

27

Before

0.2

Exterior

COFFEE PERCOLATOR

PUMP TUBE

POWER CORD
I0243T73

Figure 8. Coffee Percolator.

0150-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 28

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED TOASTER EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Visually inspect for damage or missing parts.

TOASTER

CRUMB TRAY

I0244T73

Figure 9. Toaster. 29 Before 0.2 MICROWAVE OVEN Visually inspect for damage or missing parts.

MICROWAVE OVEN

DOOR

TOUCH CONTROL PANEL

OVEN

TURNTABLE SUPPORT

TURNTABLE
Figure 10. Microwave Oven.

I0245T73

0150-9

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 30 31

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 1.0 ITEM TO BE CHECKED OR SERVICED RANGE VENTILATOR HOOD EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before Before

PROCEDURE Visually inspect the range for damage and missing parts. Visually inspect hood for damage or missing parts.

INSPECTION DRAINS

VENTILATION HOOD

INSPECTION DRAINS

FRYER RANGE OVEN GRIDDLE GREASE BUCKET


I0246T73

Figure 11. Range/Ventilator Hood.

0150-10

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 32 33

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 0.2 ITEM TO BE CHECKED OR SERVICED GRIDDLE Top Surface EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before Before

PROCEDURE Visually inspect griddle for damage or missing parts.

WARNING
Griddle surface must be warm to properly clean. Exercise care to avoid skin contact with griddle surface and possible injury. While griddle is WARM, apply griddle stone to clean. Wipe residue with damp cloth. Season griddle surface.

34

Before

0.2

Top Surface

Use spatula to remove fat and food from griddle surface; scrape down waste hole into grease bucket. Wipe all other surfaces with damp cloth and dry. Remove and empty grease bucket, wash in hot soapy water, and rinse with cool clean water. Visually inspect fryer for damage or missing parts.

35

Before

0.5

FRYER

INSPECTION DRAINS

VENTILATION HOOD

INSPECTION DRAINS

FRYER RANGE OVEN GRIDDLE GREASE BUCKET


I0246T73

Figure 12. Griddle/Fryer.

0150-11

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 36

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Exterior Surface EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING

Hot surfaces! Exercise care to avoid skin contact with hot surfaces and possible injury. Clean all exterior surfaces using hot soapy water and clean rag. Wipe dry with clean soft cloth.

INSPECTION DRAINS

VENTILATION HOOD

INSPECTION DRAINS

FRYER RANGE OVEN GRIDDLE GREASE BUCKET


I0246T73

Figure 13.

Fryer.

0150-12

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 37

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MIXER EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Visually inspect unit for damage or missing parts.

MIXER

BOWL
I0247T73

Figure 14. Mixer.

0150-13

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 38

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED GARBAGE DISPOSAL Cleaning EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING
Never reach inside disposal. Remove foreign matter using tongs. Serious injury could result.

CAUTION
Never use chemical solvents or drain cleaning compounds in disposal. Disposal will be damaged. Place four ice cubes and one lemon in disposal and operate. 39 40 Before Before 0.2 0.2 DISHWASHER Exterior Detergent Tank Inspect for cleanliness, and clean as required.

NOTE
Detergent residue may build up in detergent tank. Clean as required with clear water and refill with detergent. Check that detergent tank is full, and add detergent as required.

41

Before

0.2

Detergent System Fittings

Check that all fittings are airtight.

DISHWASHER

CONTROL PANEL
I0248T73

Figure 15. Dishwasher.

0150-14

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 42

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED PEELER EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Visually inspect unit for damage or missing parts.

COVER

DISCHARGE DOOR

I0249T73

Figure 16. Peeler. 43 44 Before Before 0.1 BAKER'S SCALE Balance Visually inspect scale for damage or missing parts. Set weights to 0, scale should balance. If not, adjust using adjusting screw.

ADJUSTING SCREW

16 13 14 15 10 11 12

BAKER'S SCALE
I0250T73

Figure 17.

Bakers Scale.

0150-15

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 45 46

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 ITEM TO BE CHECKED OR SERVICED MEAT SLICER Cleaning EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before Before

PROCEDURE Visually inspect slicer for damage and missing parts.

WARNING
Disconnect power source before cleaning. Electrocution or serious injury could occur. Use care when cleaning near slicer knife. Serious personal injury could result.

CAUTION
Never wash any slicer component in dishwasher, as permanent damage will occur. Never use steel pads to clean the knife as the abrasive action will damage the knife.

Use a mild dish soap, hot water and a clean cloth to thoroughly clean the slicer. Rinse the slicer using another clean cloth and clean hot water. Dry the slicer with another clean cloth. 47 Before 0.2 Lubrication Coat upper and lower carriage slide rods with food processing equipment oil.

KNIFE

MEAT SLICER

I0251T73

Figure 18.

Meat Slicer.

0150-16

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 48

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MARINE FREEZER Temperature Gage MARINE REFRIGERATOR Thermometer EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE Check the temperature gage to ensure that the interior temperature is -10F (-23C).

49

During

0.2

Check the thermometer to ensure that the interior temperature is 35F (2C).

EVAPORATOR MOTOR

EVAPORATOR FAN THERMOMETER

CONDENSER COIL

CONDENSER FAN

CONDENSER MOTOR
I0252T73

Figure 19. Marine Freezer and Refrigerator. 50 During 1.0 WALK-IN FREEZER CHILL BOX Check room temperature at thermostat. Temperature out of range. Temperature should be -4F to 0F (-20C to -18C). Check room temperature at thermostat. Temperature should be 33F to 37F (0.56C to 2.27C). Temperature out of range.

51

During

1.0

0150-17

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 52

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED SERVING LINE/ STEAM TABLE Sink Wells Sink Wells EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE Check that heaters warm the water in the sink wells. Turn OFF heaters and OPEN drain valves to drain the sink wells.

53

During

0.2

STEAM TABLE SINK WALLS

HEATER SWITCHES DRAIN VALVES


Figure 20. 54 During 0.2 GARBAGE DISPOSAL Unusual Sounds
I0253T73

Serving Line/Steam Table.

WARNING
Never reach inside disposal. Remove foreign matter using tongs. Serious injury could result.

CAUTION
Never use chemical solvents or drain cleaning compounds in disposal. Disposal will be damaged. Observe disposal during operation for unusual sounds.

0150-18

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 55

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MARINE FREEZER Thermometer EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE Check the thermometer to ensure that the interior temperature is -10F (-23C).

56

After

0.2

Exterior Surfaces Check that exterior surfaces are clean and dry.

EVAPORATOR MOTOR

EVAPORATOR FAN THERMOMETER

CONDENSER COIL

CONDENSER FAN

CONDENSER MOTOR
I0252T73

Figure 21. Marine Freezer.

0150-19

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 57

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED SERVING LINE/ STEAM TABLE Sink Wells Sink Wells EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE Check that heaters warm the water in the sink wells. Turn OFF heaters and OPEN drain valves to drain the sink wells.

58

After

0.2

STEAM TABLE SINK WALLS

HEATER SWITCHES DRAIN VALVES


Figure 22.
I0253T73

Serving Line/Steam Table.

0150-20

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 59

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED TOASTER Exterior Surface EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

WARNING
Unplug toaster before cleaning. Electrocution could result. Wipe off exterior using damp rag.

60

After

0.2

Crumb Tray

Remove crumb tray, empty, clean and replace.

TOASTER

CRUMB TRAY

I0244T73

Figure 23. Toaster.

0150-21

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 61

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED OVEN Exterior Surface EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

CAUTION
Never use abrasive or harsh cleaners or scouring pads. Damage to oven will result. Clean the outside of the oven of grease and soil buildup with mild soap and water; rinse and dry with a soft cloth. Do not use any type of household or abrasive cleaner.

INSPECTION DRAINS

VENTILATION HOOD

INSPECTION DRAINS

FRYER RANGE OVEN GRIDDLE GREASE BUCKET


I0254T73

Figure 24. Oven.

0150-22

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 62

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Interior Surfaces EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE Check the interior surfaces for grease and soil buildup, wipe with soft cloth and warm water. Wipe wave guide cover in ceiling of oven with soft damp cloth to remove food. For heavier soil, use baking soda or mild soap; rinse thoroughly with hot water and wipe dry.

INSPECTION DRAINS

VENTILATION HOOD

INSPECTION DRAINS

FRYER RANGE OVEN GRIDDLE GREASE BUCKET


I0254T73

Figure 25. Oven.

0150-23

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 63

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MICROWAVE OVEN EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE Check for unusual odors. Odors can be eliminated from the inside of the oven by boiling a solution of one cup of water and several tablespoons of lemon juice in the oven for 5 to 7 minutes. Wipe out excess moisture after every use.

MICROWAVE OVEN

DOOR

TOUCH CONTROL PANEL

OVEN

TURNTABLE SUPPORT

TURNTABLE
Figure 26. Microwave Oven.

I0245T73

0150-24

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 64

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Turntable/ Turntable Support EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

CAUTION
Handle turntable support carefully. If dropped, damage to turntable support will result. Remove turntable and turntable support for cleaning. Clean floor of oven with mild soap and water; rinse and dry with a soft cloth. Clean turntable and support in mild sudsy water or in dishwasher. Dry with a soft cloth.

65 66 67

After After After

0.2 0.2 0.2

Touch Control Panel Vents Door

Clean touch control panel with mild soap and water. Clean vents by wiping with soft cloth. OPEN oven door and wipe panel with a cloth dampened slightly with water only and dry with a soft cloth. Avoid use of excess water.

MICROWAVE OVEN

DOOR

TOUCH CONTROL PANEL

OVEN

TURNTABLE SUPPORT

TURNTABLE
Figure 27. Microwave Oven.

I0245T73

0150-25

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 68 69 70

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 0.2 ITEM TO BE CHECKED OR SERVICED RANGE Top Surface Exterior Surface Oven/Racks EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After After After

PROCEDURE Clean range surfaces daily using soapy water and clean cloth; wipe dry. Thoroughly clean range using soapy water and clean cloth; wipe dry.

CAUTION
Any oven cleaner used must be marked "SAFE ON ALUMINUM" or damage to range will result. Clean the oven and oven racks. Observe all safety precautions and follow label directions.

71

After

0.2

VENTILATOR HOOD Interior Main Grease Gutter

Open inspection doors; ensure that interior is clean and free of grease, lint, and dust. If interior is dirty, refer to Field Maintenance. Check main grease gutter and remove any foreign material.

72

After

0.2

INSPECTION DRAINS

VENTILATION HOOD

INSPECTION DRAINS

FRYER RANGE OVEN GRIDDLE GREASE BUCKET


I0246T73

Figure 28. Ventilator Hood.

0150-26

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 73

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED GRIDDLE Top Surface EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

WARNING
Griddle surface must be warm to properly clean. Exercise care to avoid skin contact with griddle surface and possible injury. While griddle surface is WARM, apply griddle stone to clean. Wipe residue with damp cloth. Season griddle surface.

74

After

0.2

Top Surface

Use spatula to remove fat and food from griddle surface; scrape down waste hole into grease bucket. Wipe all other surfaces with damp cloth and dry. Remove an empty grease bucket, wash in hot soapy water, and rinse with cool clean water.

75

After

0.2

FRYER Exterior Surface

WARNING

Hot surfaces! Exercise care to avoid skin contact with hot surfaces and possible injury. Clean all exterior surfaces using hot soapy water and clean rag. Wipe dry with clean soft cloth.

INSPECTION DRAINS

VENTILATION HOOD

INSPECTION DRAINS

FRYER RANGE OVEN GRIDDLE GREASE BUCKET


I0246T73

Figure 29.

Fryer.

0150-27

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 76

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MIXER Exterior Surface EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

WARNING
Unplug mixer before cleaning. Electrocution could result. Clean exterior using hot, soapy water and clean cloth. Wipe dry with clean soft cloth.

77

After

0.2

Lubrication

Apply a light coat of food processing equipment grease to both slideways.

MIXER

BOWL
I0247T73

Figure 30. Mixer.

0150-28

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 78 79

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 ITEM TO BE CHECKED OR SERVICED DISHWASHER Exterior Interior EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After After

PROCEDURE Inspect for cleanliness, and clean as required. Inspect for cleanliness. Clean as required.

DISHWASHER

CONTROL PANEL
I0248T73

Figure 31. Dishwasher.

0150-29

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 80

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Detergent Tank EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

NOTE
Detergent residue may build up in detergent tank. Clean as required with clear water and refill with detergent. Check that detergent tank is full, and add detergent as required.

81

After

0.2

Interior

At the conclusion of the wash cycle, check that the interior is clean, and wipe the interior of the machine with a damp cloth.

DISHWASHER

CONTROL PANEL
I0248T73

Figure 32. Dishwasher.

0150-30

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 82

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PEELER Cover and Interior EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

CAUTION
Washing peeler disc with hot water could damage disc. Remove cover and peeling disc, wash peeling disc thoroughly with cold water.

COVER

DISCHARGE DOOR

I0249T73

Figure 33. Peeler.

0150-31

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 83 84 85

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 0.2 ITEM TO BE CHECKED OR SERVICED Inside Discharge Door Grease Cups EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After After After

PROCEDURE Wash inside of peeler thoroughly and rinse with warm water using flexible hose. Store peeler with discharge door open. This will prolong life of peeler. Remove cover and peeling disc. Turn grease cups 1/4 turn. When cups no longer turn, remove and refill with food processing equipment grease. Refer to TM-55-1925-226-24&P for further lubrication instructions.

COVER

DISCHARGE DOOR

I0249T73

Figure 34. Peeler.

0150-32

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 86

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MEAT SLICER EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

WARNING
Disconnect power source before cleaning. Electrocution or serious injury could occur. Use care when cleaning near slicer knife. Serious personal injury could result.

CAUTION
Never wash any slicer component in dishwasher, as permanent damage will occur. Never use steel pads to clean the knife as the abrasive action will damage the knife.

Use a mild dish soap, hot water and a clean cloth to thoroughly clean the slicer. Rinse the slicer using another clean cloth and clean hot water. Dry the slicer with another clean cloth.

KNIFE

MEAT SLICER

I0251T73

Figure 35.

Meat Slicer.

0150-33

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 87

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MARINE FREEZER AND REFRIGERATOR Condenser Coil Drain Line Condenser and Evaporator Fan Motors EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Inspect condenser coil to make certain that air flow is not hampered and that it is clear of dust and debris.

88 89

Weekly Weekly

0.2 0.2

Inspect and check that drain line is unstopped. Check both the condenser fan motor and the evaporator fan motor to make certain that they are operational and that the fans are tight and secure.

EVAPORATOR MOTOR

DOOR

EVAPORATOR FAN THERMOMETER


SCREWS HINGE COVER

CONDENSER COIL CONDENSER FAN

GASKET

CONDENSER MOTOR

MARINE FREEZER AND REFRIGERATOR

MARINE FREEZER AND REFRIGERATOR (DOOR)


I0236T73

Figure 36.

Marine Freezer and Refrigerator.

0150-34

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 90

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED WALK-IN FREEZER Freezer Alarm Condenser Coil EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Visually inspect for damage or missing parts. Inspect condenser coil to make certain that air flow is not hampered and that it is clear of dust and debris. Inspect and check that the deck drains are serviceable. Check that interior shelving is clean and dry. Visually inspect the evaporator fan motors to make certain that they are operational and that the fans are tight and secure.

91

Weekly

0.2

92 93 94

Weekly Weekly Weekly

0.2 0.2 0.2

Deck Drains Interior Shelving Evaporator Fan Motors

DOOR

SCREWS

HINGE COVER

DRAIN LINE

EVAPORATOR FANS AND MOTOR CHILL BOX

DRAIN LINE

GASKET

CHILL BOX (DOOR)


I0238T73

Figure 37. Walk-In Freezer. 95 Weekly 0.2 CHILL BOX Refrigerator Alarm Condenser Coil Visually inspect for damage or missing parts. Inspect condenser coil to make certain that air flow is not hampered and that it is clear of dust and debris. Inspect and check that the deck drains are serviceable.

96

Weekly

0.2

97

Weekly

0.2

Deck Drains

0150-35

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 98 99

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 ITEM TO BE CHECKED OR SERVICED Interior Shelving Evaporator Fan Motors MICROWAVE OVEN Vents EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly Weekly

PROCEDURE Check that interior shelving is clean and dry. Visually inspect the evaporator fan motors to make certain that they are operational and that the fans are tight and secure. Clean vents by wiping with soft cloth.

100

Weekly

0.2

MICROWAVE OVEN

DOOR

TOUCH CONTROL PANEL

OVEN

TURNTABLE SUPPORT

TURNTABLE
Figure 38. Microwave Oven.

I0245T73

0150-36

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 101

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED VENTILATOR HOOD Detergent Tank EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

CAUTION
Use of other detergents could cause damage to O-rings, seals, diaphragms, washers, or tubing. Check level. Refill as required. Use only Gaylord formula G-510 detergent.

INSPECTION DRAINS

VENTILATION HOOD

INSPECTION DRAINS

FRYER RANGE OVEN GRIDDLE GREASE BUCKET


I0246T73

Figure 39. Ventilator Hood.

0150-37

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 102 103 104

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.1 0.2 ITEM TO BE CHECKED OR SERVICED Detergent System Fittings SPRAY UNIT Hose EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly Weekly Weekly

PROCEDURE Using fingers, ensure that there are no loose fittings. Inspect nozzle for sediment and scale buildup. Inspect hose for damage or fraying.

INSPECTION DRAINS

VENTILATION HOOD

INSPECTION DRAINS

FRYER RANGE OVEN GRIDDLE GREASE BUCKET


I0246T73

Figure 40. Ventilator Hood. 105 Weekly 0.2 GARBAGE DISPOSAL Cleaning Place four ice cubes and one lemon in disposal and operate.

0150-38

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 106

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED DISHWASHER/ SANITIZER Wash Arms EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

CAUTION
Do not grasp wash arms at ends. Hold at hub or damage to wash arms could result. Remove lower wash arm by grasping it by the hub and pull up and out of the machine. Remove upper wash arm by carefully loosening the retaining screw. Wash thoroughly in hot soapy water in sink. Clean strainer in bottom of dishwasher before installing wash arms.

DISHWASHER

CONTROL PANEL
I0248T73

Figure 41.

Dishwasher/Sanitizer.

0150-39

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 107

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PEELER Grease Cups EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Remove cover and peeling disc. Turn grease cups 1/4 turn. When cups no longer turn, remove and refill with food processing equipment grease.

COVER

DISCHARGE DOOR

I0249T73

Figure 42. Peeler.

0150-40

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 108

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MEAT SLICER Lubrication EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Coat upper and lower carriage slide rods with food processing equipment oil.

KNIFE

MEAT SLICER

I0251T73

Figure 43.

Meat Slicer.

0150-41

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 109

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MARINE FREEZER AND REFRIGERATOR Interior Liner Door Gaskets EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Check that interior liner is clean and dry.

110 111

Monthly Monthly

0.2 0.2

Check that door gaskets are clean and serviceable.

Exterior Surfaces Check that exterior surfaces are clean and dry.

EVAPORATOR MOTOR

DOOR

EVAPORATOR FAN THERMOMETER


SCREWS HINGE COVER

CONDENSER COIL CONDENSER FAN

GASKET

CONDENSER MOTOR

MARINE FREEZER AND REFRIGERATOR

MARINE FREEZER AND REFRIGERATOR (DOOR)


I0236T73

Figure 44.

Marine Freezer and Refrigerator.

0150-42

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 112

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED WALK-IN FREEZER Door Gaskets CHILL BOX EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

Check room temperature at thermostat. Temperature out of range. Temperature should be -4F to 0F (-20C to -18C). Check that door gaskets are clean and serviceable. Check room temperature at thermostat. Temperature should be 33F to 37F (1C to 2C). Check that door gaskets are clean and serviceable.

113 114

Monthly Monthly

0.2 1.0

115

Monthly

0.2

Door Gaskets

DOOR

SCREWS

HINGE COVER

GASKET
I0239T73

Figure 45.

Marine Freezer and Refrigerator (Door).

0150-43

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 116

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED COFFEE PERCOLATOR Power Cord Pump Tube EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Inspect power cord and plug for cracks in insulation or other damage. Place out of service if bare wires are exposed or if plug is damaged.

117

Monthly

0.2

CAUTION
Do not immerse percolator. Damage to the unit will result. Ensure that the washer in the base of the pump tube remains loose. Remove all coffee grounds by using running water or a toothpick.

COFFEE PERCOLATOR

PUMP TUBE

POWER CORD
I0243T73

Figure 46.

Coffee Percolator.

0150-44

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 118

0150

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PEELER Lubrication EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Quarterly

PROCEDURE Place a few drops of oil on each end of the motor.

COVER

DISCHARGE DOOR

I0249T73

Figure 47. Peeler.

Table 2. Equipment to Lubricate Meat Slicer Carriage Sliding Rods Mixer Slideways Peeler Grease Cups Peeler Motor

Lubricant Specifications. Lubricant Specification Application Method Brush Brush Pack Can

Food Processing Equipment Oil (DOD-L-24651) Food Processing Equipment Grease (DOD-G-24651) Food Processing Equipment Grease (DOD-G-24651) General Purpose Lubricating Oil (MIL-PRF-32033)

END OF TASK END OF WORK PACKAGE

0150-45/46 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00015)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION MAIN DECK STATEROOMS, SANITARY SPACES, AND PASSAGEWAY

0151

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0151-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00016)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0151

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED Life Jacket Locker EQUIPMENT NOT READY/ AVAILABLE IF: Not enough undamaged life jackets for the entire crew and passengers.

INTERVAL Before

PROCEDURE Inspect locker for secure mounting and obvious damage. Ensure that life jackets are properly stored and that they are undamaged.

LIFE JACKET LOCKER

I0255T73

Figure 1. 2 Before 0.2

Life Jacket Locker. Class III leaks or components not securely mounted.

AMS 1 Inspect for leaks and secure mounting. WATERTIGHT Check oil level. Add oil (OE/HDO-40) as DOOR REMOTE required. HAND PUMP STATION Hand Pump and Reservoir Hand Pump Crew's Mess

Before

0.2

Operate the hand pump to close the door Door does not operate. and ensure smooth operation of the pump and correct operation of the door. Check for leaks. Inspect for leaks and secure mounting. Check oil level. Add oil (OE/HDO-40) as required. Class III leaks or components not securely mounted.

During

0.2

Hand Pump and Reservoir Hand Pump

During

0.2

Operate the hand pump to close the door Door does not operate. and ensure smooth operation for the pump and correct operation of the door. Check for leaks. Inspect for leaks and secure mounting. Check oil level. Add oil (OE/HDO-40) as required. Class III leaks or components not securely mounted.

Weekly

0.2

Hand Pump and Reservoir

0151-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00016)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 7

0151

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Hand Pump EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

Operate the hand pump to close the door Door does not operate. and ensure smooth operation of the pump and correct operation of the door. Check for leaks. Check oil level on dipstick and add oil as required.

Monthly

0.2

Reservoir

AMS 1 WATERTIGHT DOOR RESERVOIR, LOCATED IN THE VESTIBULE

AMS 1 WATERTIGHT DOOR HAND CRANK LOCATED IN THE CREW'S MESS HAND CRANK

I0256T73

Figure 2.

AMS 1 Watertight Door Remote Hand Pump Station.

0151-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00016)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 9

0151

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED Life Jacket Locker EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

Inspect locker for secure mounting and Not enough undamaged obvious damage. Ensure the life jackets are life jackets for the entire properly stored and that they are crew and passengers. undamaged.

LIFE JACKET LOCKER

I0255T73

Figure 3.

Life Jacket Locker.

Table 2. Item Lubricated Sliding Hydraulic Watertight Door END OF TASK END OF WORK PACKAGE

Lubrication Specifications. Military Specification MIL-PRF-46170

Lubricant Hydraulic Fluid, Fire Resistant

0151-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00016)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION BOATSWAIN'S STORE, ARMS LOCKER, AND LAUNDRY ROOM

0152

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0152-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00017)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0152

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED LAUNDRY ROOM WASHER Hoses Power Cord Ground Filter Control Panel EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Inspect hoses for serviceability and leaks, and ensure that the drain connection is secure. During operation verify that there are no unusual sounds. Inspect power cord for serviceability. Ensure that ground wire connections are secure and ground wire is serviceable. Clean filter, if applicable. Inspect for obvious damage or missing controls or indicators.

2 3 4 5

Before Before Before Before

0.2 0.2 0.2 0.2

CONTROL PANEL

HOT WATER HOSE COLD WATER HOSE WASHER

DRAIN HOSE POWER CORD

I0257T73

Figure 1. Laundry Room Washer.

0152-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00017)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 6 7 8 9 10

0152

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 0.2 0.2 0.2 ITEM TO BE CHECKED OR SERVICED DRYER Power Cord Ground Filter Control Panel Operation EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before Before Before Before Before

PROCEDURE Inspect power cord for serviceability. Ensure that ground wire connections are secure and ground wire is serviceable. Clean filter. Inspect for obvious damage or missing controls or indicators. Verify that the IN USE indicator is lit, and that there are no unusual noises.

CONTROL PANEL

DOOR DUCTING

POWER CORD

FILTER DRYER
Figure 2. Laundry Room Dryer.
I0258T73

0152-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00017)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 11

0152

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED BOATSWAIN'S STORE Ventilation System EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE Check unit for unusual noises, and ensure that the damper operates properly.

EXHAUST FANS

SUPPLY FAN
I0259T73

Figure 3.

Boatswain's Store.

0152-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00017)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 12 13 14

0152

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 0.2 0.2 ITEM TO BE CHECKED OR SERVICED LAUNDRY TUB Tub Faucet Drain EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During During During

PROCEDURE Inspect for secure mounting. Inspect for secure mounting and leaks. Verify that the tub drains by plugging the drain, filling the tub with 2 in. of water, removing the drain plug and verifying that the water drains.

FAUCET

TUBS LAUNDRY TUB

DRAIN

I0260T73

Figure 4. Laundry Tub.

0152-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00017)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 15

0152

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED ARMS STOWAGE ROOM Ammo Locker SPRINKLER HEADS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Visually inspect locker for damage or missing parts.

16

Weekly

0.2

Visually inspect for corrosion or damage, and refer to Field Maintenance if unserviceable. Check high temperature sensors and security alarm. Visually inspect obvious damage, missing parts and tampering.

Sprinkler heads are corroded or damaged enough to affect operation.

17

Monthly

0.2

ARMS STOWAGE ROOM Arms Stowage Alarm System

ARMS ROOM WATER AND TEMPERATURE ALARM

HEAT SENSOR

ALARM SWITCH BOARD LOCATED IN THE PILOTHOUSE

SPRINKLER WATER PRESSURE SWITCH

ARMS ROOM WATER LEVEL ALARM INDICATOR

ARMS ROOM HIGH TEMPERATURE ALARM INDICATOR

I0261T73

Figure 5.

Arms Stowage Room.

0152-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00017)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 18

0152

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED STORAGE LOCKERS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Inspect lockers for secure mounting, and ensure that they can be adequately secured to protect contents.

ARMS AND AMMO LOCKERS


I0262T73

Figure 6. Storage Lockers.

0152-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00017)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 19

0152

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED BOATSWAIN'S STORE Ventilation System EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Check unit for unusual noises, and ensure that the damper operates properly.

EXHAUST FANS

SUPPLY FAN
I0259T73

Figure 7.

Boatswain's Store.

0152-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00017)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 20

0152

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED LAUNDRY ROOM WASHER Hoses Power Cord Ground Filter Control Panel EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Inspect hoses for serviceability and leaks, and ensure that the drain connection is secure. During operation verify that there are no unusual sounds. Inspect power cord for serviceability. Ensure that ground wire connections are secure and ground wire is serviceable. Clean filter, if applicable. Inspect for obvious damage or missing controls or indicators.

21 22 23 24

Monthly Monthly Monthly Monthly

0.2 0.2 0.2 0.2

CONTROL PANEL

HOT WATER HOSE COLD WATER HOSE WASHER

DRAIN HOSE POWER CORD

I0257T73

Figure 8. Laundry Room Washer.

0152-9

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00017)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 25 26 27 28 29

0152

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 0.2 0.2 0.2 ITEM TO BE CHECKED OR SERVICED DRYER Power Cord Ground Filter Control Panel Operation EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly Monthly Monthly Monthly Monthly

PROCEDURE Inspect power cord for serviceability. Ensure that ground wire connections are secure and ground wire is serviceable. Clean filter. Inspect for obvious damage or missing controls or indicators. If applicable, verify that the IN USE indicator is lit, and no unusual noises are audible.

CONTROL PANEL

DOOR DUCTING

POWER CORD

FILTER DRYER
Figure 9. Laundry Room Dryer.
I0258T73

0152-10

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00017)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 30 31 32

0152

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 0.2 ITEM TO BE CHECKED OR SERVICED LAUNDRY TUB Tub Faucet Drain EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly Monthly Monthly

PROCEDURE Inspect for secure mounting. Inspect for secure mounting and leaks. Verify that the tub drains by plugging the drain, filling the tub with 2 in. of water, removing the drain plug and verifying that the water drains.

FAUCET

TUBS LAUNDRY TUB

DRAIN

I0260T73

Figure 10. Laundry Tub.

END OF TASK END OF WORK PACKAGE

0152-11/12 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00017)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION 01 LEVEL WEATHER DECKS

0153

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0153-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00018)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0153

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.3 ITEM TO BE CHECKED OR SERVICED EXTERNAL STRUCTURES H-BITT EQUIPMENT NOT READY/ AVAILABLE IF: Watertight integrity or operational capability is impaired. Structural cracks in foundation or damage to vents.

INTERVAL Before

PROCEDURE Inspect for structural damage.

Before

0.5

Inspect H-bitt for secure mounting and damage.

Before

0.5

BULL NOSE

Inspect bull nose for secure mounting, and Structural cracks in that there are no sharp edges present that foundation. could chaff line. Inspect for secure mounting and obvious damage and ensure that the clapper is installed. Pelican hook is not operational.

Before

0.1

SHIP'S BELL

Before

0.2

PELICAN HOOK Visually inspect pelican hook. Look for obvious damage (e.g., cracks or broken parts).

BULL NOSE

H-BIT

PELICAN HOOK

BOATSWAIN'S STORE

I0263T73

Figure 1.

External Structures.

0153-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00018)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 6

0153

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED FLOODLIGHTS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Inspect for secure mounting and proper operation.

FLOODLIGHT

I0264T73

Figure 2. Floodlights.

0153-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00018)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 7

0153

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED AFT CONTROL STATION EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Inspect control station for cleanliness; clean Any critical control or as required. Look for any loose, missing, or meter unserviceable. broken switches or controls, gages, indicator lights, or obvious damage. Ensure that panel cover is tight. Ensure that throttle, command transfer, and non-follow up controls operate smoothly and do not bind.

BOW THRUSTER ENGINE THROTTLE

REMOTE PROPULSION INDICATOR PANEL AFT PROPULSION CONTROL PANEL

RUDDER ANGLE INDICATOR

HEATER LAMP COMMAND TRANSFER

CONTROL AIR PREAMP GAGE

PORT MAIN ENGINE THROTTLE CLUTCH

RUDDER CONTROL JOY STICK IN COMMAND LAMP


Figure 3.

STBD MAIN ENGINE THROTTLE CLUTCH

I0265T73

Aft Control Station.

0153-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00018)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 8

0153

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Rudder Angle Indicator EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE a. Ensure that dimmer is able to adjust intensity of lights. b. Needle moves in direction of joystick.

If needle does not track with joystick.

Before

0.2

Remote Propulsion Indicator Panel

Press and hold LAMP TEST button. All lights will light. Adjust intensity of lights using DIMMER control.

BOW THRUSTER ENGINE THROTTLE

REMOTE PROPULSION INDICATOR PANEL AFT PROPULSION CONTROL PANEL

RUDDER ANGLE INDICATOR

HEATER LAMP COMMAND TRANSFER

CONTROL AIR PREAMP GAGE

PORT MAIN ENGINE THROTTLE CLUTCH

RUDDER CONTROL JOY STICK IN COMMAND LAMP STBD MAIN ENGINE THROTTLE CLUTCH
I0265T73

Figure 4. AFT Control Station.

0153-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00018)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 10

0153

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED GUN MOUNTS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Inspect gun mounts for wear and damage. Gun mounts unserviceable.

CRADLE

CARRIAGE CARRIAGE PINTLE

STAND SOCKET STAND PINTLE CLAMP MOUNTING HARDWARE


I0266T73

Figure 5. 11 During 0.5 FLOODLIGHTS

Gun Mounts.

Inspect for secure mounting and proper operation.

FLOODLIGHT

I0264T73

Figure 6.

Floodlights.

0153-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00018)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 12

0153

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED AFT CONTROL STATION Rudder Angle Indicator EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE a. Ensure that dimmer is able to adjust intensity of lights.

b. Needle moves in direction of joystick. 13 During 0.2 Control Station Observe lights and gages to ensure proper operation.

If needle does not track with joystick.

BOW THRUSTER ENGINE THROTTLE

REMOTE PROPULSION INDICATOR PANEL AFT PROPULSION CONTROL PANEL

RUDDER ANGLE INDICATOR

HEATER LAMP COMMAND TRANSFER

CONTROL AIR PREAMP GAGE

PORT MAIN ENGINE THROTTLE CLUTCH

RUDDER CONTROL JOY STICK IN COMMAND LAMP STBD MAIN ENGINE THROTTLE CLUTCH
I0265T73

Figure 7. AFT Control Station.

0153-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00018)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 14

0153

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: Pelican hook is not operational. Pelican hook is not operational. Watertight integrity or operational capability is impaired.

INTERVAL During

PROCEDURE

PELICAN HOOK Visually inspect pelican hook. Look for obvious damage (e.g., cracks or broken parts). PELICAN HOOK Visually inspect pelican hook. Look for obvious damage (e.g., cracks or broken parts). EXTERNAL STRUCTURES Inspect for structural damage.

15

After

0.2

16

Weekly

0.3

BULL NOSE

H-BIT

PELICAN HOOK

BOATSWAIN'S STORE

I0263T73

Figure 8.

External Structures.

0153-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00018)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 17

0153

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

AMMO LOCKER Visually inspect locker for damage or missing parts.

HEAT SHIELD DOG

THERMOMETER HOUSING ORDINANCE STOWAGE LOCKER THERMOMETER COVER

THERMOMETER GASKET LOCK


I0267T73

Figure 9. Ammo Locker. 18 Monthly 0.5 VENT COVER GASKETS Check that the gaskets are clean, serviceable, and seal properly.

VENTILATION DUCT WORK

GASKET

VENTILATION HINGED COVER


I0268T73

Figure 10. Vent Cover Gaskets.

0153-9

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00018)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 19

0153

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED AFT CONTROL STATION EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

Inspect control station for cleanliness; clean Any critical control or as required. Look for any loose, missing, or meter unserviceable. broken switches or controls, gages, indicator lights, or obvious damage. Ensure that panel cover is tight. Ensure that throttle, command transfer, and non-follow up controls operate smoothly and do not bind. a. Ensure dimmer is able to adjust intensity of lights. b. Needle moves in direction of joystick. Needle does not track with joystick.

20

Weekly

0.4

Rudder Angle Indicator

21

Weekly

0.2

Control Station

Observe lights and gages to ensure proper operation.

BOW THRUSTER ENGINE THROTTLE

REMOTE PROPULSION INDICATOR PANEL AFT PROPULSION CONTROL PANEL

RUDDER ANGLE INDICATOR

HEATER LAMP COMMAND TRANSFER

CONTROL AIR PREAMP GAGE

PORT MAIN ENGINE THROTTLE CLUTCH

RUDDER CONTROL JOY STICK IN COMMAND LAMP


Figure 11.

STBD MAIN ENGINE THROTTLE CLUTCH

I0265T73

AFT Control Station.

0153-10

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00018)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 22 23 24

0153

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 0.1 ITEM TO BE CHECKED OR SERVICED DOUBLE BITTS Forward Aft BOATSWAIN'S STORE H-BITT EQUIPMENT NOT READY/ AVAILABLE IF: Structural cracks in the foundation or damage. Structural cracks in foundation or damage.

INTERVAL Monthly Monthly Monthly

PROCEDURE Inspect the forward double bitt for secure mounting and damage. Inspect the aft double bitt for secure mounting and damage. Visually inspect hatch for damage or missing parts, and check that gasket is clean and serviceable. Inspect H-bitt for secure mounting and damage.

25

Monthly

0.5

Structural cracks in foundation or damage to vents.

26

Monthly

0.05

BULL NOSE

Inspect bull nose for secure mounting, and Structural cracks in that there are no sharp edges present that foundation. could chaff line.

BULL NOSE

H-BIT

PELICAN HOOK

BOATSWAIN'S STORE

I0263T73

Figure 12.

Double Bitts.

0153-11

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00018)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 27

0153

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED SHIP'S BELL EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Inspect for secure mounting and obvious damage and ensure that the clapper is installed. Inspect for secure mounting and proper operation.

28

Monthly

0.5

FLOODLIGHTS

FLOODLIGHT

I0264T73

Figure 13.

Floodlights.

0153-12

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00018)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 29

0153

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED GUN MOUNTS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

Inspect gun mounts for wear and damage. Gun mounts unserviceable.

CRADLE

CARRIAGE CARRIAGE PINTLE

STAND SOCKET STAND PINTLE CLAMP MOUNTING HARDWARE


I0266T73

Figure 14.

Gun Mounts.

END OF TASK END OF WORK PACKAGE

0153-13/14 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00018)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION 01 LEVEL STATEROOMS AND SANITARY SPACES

0154

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0154-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00019)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1 2 3

0154

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 1.0 0.2 0.1 ITEM TO BE CHECKED OR SERVICED Staterooms Sanitary Spaces Exhaust Fan Sanitary Spaces Exhaust Fan EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before Before During

PROCEDURE Secure all items. Grease the fan with general purpose grease.

Observe fan for unusual noise or vibration. Fails to operate.

SANITARY SPACE EXHAUST FAN

GREASE FITTINGS
Figure 1.

I0269T73

Sanitary Spaces Exhaust Fan.

Table 2. Item Lubricated Sanitary Spaces Exhaust Fans END OF TASK END OF WORK PACKAGE

Lubrication Specifications. Military Specification MIL-PRF-24139

Lubricant Grease, General Purpose

0154-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00019)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION 01 LEVEL FAN ROOMS

0155

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0155-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00020)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1 2

0155

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.2 0.2 ITEM TO BE CHECKED OR SERVICED REHEATER FAN COIL UNIT EQUIPMENT NOT READY/ AVAILABLE IF: Unit damaged or switches broken or missing.

INTERVAL Before Before

PROCEDURE Inspect unit for obvious damage.

Grease fan and motor with general purpose Fails to operate. grease. Apply 1-2 shots per fitting to each of the four grease fittings. Observe the general condition of the unit. Observe unit for unusual noises or excessive vibration. Fails to operate.

During

0.2

FAN COIL UNIT

GREASE FITTINGS

REHEATER
Figure 1.

FAN COIL UNIT


I0270T73

Fan Coil Unit.

0155-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00020)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 4

0155

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED C4I Batteries EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

WARNING

Avoid flame, spark, and other ignition sources when observing battery electrolyte levels. Batteries give off fumes that can explode. Electrolyte is an acid and can cause chemical burns and other injuries if it contacts skin and eyes. Wear approved goggles and a chemical protective apron. Failure to comply can result in serious injury or death. Inspect battery terminals, connections, cables and vent caps for cleanliness and tightness. If terminals, connections, or cables are loose or corroded, notify Field Maintenance.

CABLE TERMINAL CONNECTION NEGATIVE TERMINAL

TERMINAL CABLE CONNECTION

POSITIVE TERMINAL

VENT CAPS BATTERIES


I0271T73

Figure 2. C41 Batteries.

0155-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00020)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 5 6 7

0155

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 0.2 ITEM TO BE CHECKED OR SERVICED REHEATER FAN COIL UNIT FAN COIL UNIT EQUIPMENT NOT READY/ AVAILABLE IF: Unit damaged or switches broken ot missing. Fails to operate.

INTERVAL Monthly Monthly Monthly

PROCEDURE Inspect unit for obvious damage. Observe unit for unusual noises or excessive vibration. Grease fan and motor with general purpose grease. Apply 1-2 shots per fitting to each of the four grease fittings. Inspect unit for obvious damage.

Monthly

0.2

PREHEATER

Fails to operate.

GREASE FITTINGS

REHEATER

FAN COIL UNIT


I0272T73

Figure 3.

Preheater.

0155-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00020)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 9

0155

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED REFRIGERATION PIPING EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Inspect refrigeration piping for leaks.

REFRIGERATION PIPING

I0273T73

Figure 4. Refrigeration Piping.

0155-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00020)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 10

0155

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED C4I Batteries EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

WARNING

Avoid flame, spark, and other ignition sources when observing battery electrolyte levels. Batteries give off fumes that can explode. Electrolyte is an acid and can cause chemical burns and other injuries if it contacts skin and eyes. Wear approved goggles and a chemical protective apron. Failure to comply can result in serious injury or death. Check electrolyte level. If the electrolyte level is low, add distilled water to bring the electrolyte to the proper level.

CABLE TERMINAL CONNECTION NEGATIVE TERMINAL

TERMINAL CABLE CONNECTION

POSITIVE TERMINAL

VENT CAPS BATTERIES


I0271T73

Figure 5.

C41 Batteries.

END OF TASK END OF WORK PACKAGE

0155-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00020)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION EMERGENCY DIESEL GENERATOR ROOM

0156

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0156-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

EMERGENCY Visually inspect the exterior of the Any critical controls or SWITCHBOARD switchboard for damaged or missing circuit meters unserviceable. breakers, meters, controls, and lights.

EMERGENCY SWITCHBOARD

I0274T73

Figure 1. 2 Before 0.2 BATTERY CHARGER

Emergency Switchboard.

NOTE
A high reading indicates the batteries are weak and are being recharged or that one or more batteries are unserviceable. Check battery charger for proper connections to battery. Ammeter should read near 0 for trickle charge. If reading is above 3 A, refer to Field Maintenance. Charger does not operate properly.

AMMETER

BATTERY CHARGER

I0275T73

Figure 2.

Battery Charger.

0156-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 3

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED BATTERY BOX EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Visually inspect the battery box for obvious Battery box is not damage, and ensure the vent is not serviceable. obstructed.

BATTERY BOX COVER

BATTERY BOX

WING NUTS
I0276T73

Figure 3. Battery Box.

0156-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 4

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EDG STARTING BATTERIES EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING

Avoid flame, spark, and other ignition sources when observing battery electrolyte levels. Batteries give off fumes that can explode. Electrolyte is an acid and can cause chemical burns and other injuries if it contacts skin and eyes. Wear approved goggles and a chemical protective apron. Failure to comply can result in serious injury or death.

NOTE
Top cover of battery box must be removed to check batteries. Inspect batteries, terminals, connections, cables, and vent caps for cleanliness and tightness. Any damage or failed connections.

CABLE TERMINAL CONNECTION NEGATIVE TERMINAL

TERMINAL CABLE CONNECTION

POSITIVE TERMINAL

VENT CAPS BATTERIES


Figure 4. EDG Starting Batteries.
I0277T73

0156-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 5

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Terminal Connections EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Clean or tighten terminal connections as required. Clean battery as required using a paste of clear water and baking soda. Rinse with clear water when finished. Check electrolyte level and check specific gravity of electrolyte with a hydrometer. Specific gravity should be 1.265.

Before

0.2

Electrolyte

If hydrometer readings are not satisfactory.

TERMINAL CONNECTION

CABLE

TERMINAL CONNECTION

CABLE

NEGATIVE TERMINAL

POSITIVE TERMINAL

VENT CAPS BATTERIES


Figure 5. 7 Before 0.1 FUEL OIL DAY TANK EDG Starting Batteries. Visually inspect tank for leaks. Check fuel oil level using sight glass. Any leaks.

I0278T73

FUEL OIL LEVEL GAGE

EMERGENCY DIESEL GENERATOR FUEL OIL DAY TANK


I0279T73

Figure 6. Fuel Oil Day Tank.

0156-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 8

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED ENGINE ACCESSORIES AND CONNECTIONS EQUIPMENT NOT READY/ AVAILABLE IF: Any leaks or damaged connectors likely to leak. Unserviceable or missing belts or guards.

INTERVAL Before

PROCEDURE Inspect engine, fuel injection pumps, and cooling pumps for loose or damaged connections or mountings. Inspect fluid lines and joints for leaks. Inspect engine for loose, broken, or missing belts, fittings, or guards. Check oil level at dipstick. Level should be between ADD and FULL marks on ENGINE STOPPED side of dipstick. Add oil (NSN 9150-00-135-2634) as required. Check radiator coolant level. Ensure that vent is not obstructed and screen is in place and serviceable.

Before

0.2

Engine Crankcase Oil

10 11

Before Before

0.2 0.1

Cooling System RADIATOR INTAKE AND EXHAUST LOUVERS

Vent is obstructed or screen unserviceable.

RADIATOR CAP EMERGENCY DIESEL GENERATOR

RADIATOR

OIL FILL

DIPSTICK OIL FILTER AIR CLEANER


Figure 7. Radiator Intake and Exhaust Louvers.
I0280T73

0156-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 12

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED LOAD CENTER EQUIPMENT NOT READY/ AVAILABLE IF: Mounting not secure or obvious damage.

INTERVAL Before

PROCEDURE Inspect for secure mounting and obvious damage.

LOAD CENTER

PHASE A

PHASE B

PHASE C

GROUND DETECTION PRESS TO TEST LAPSE

I0281T73

Figure 8. 13 During 0.2 BATTERY CHARGER

Load Center.

NOTE
A high reading indicates the batteries are weak and are being recharged or that one or more batteries are unserviceable. Check battery charger for proper Charger does not operate connections to battery. Ammeter should properly. read near 0 for trickle charge. If reading is above 3 amps, refer to Field Maintenance.

AMMETER

BATTERY CHARGER

I0275T73

Figure 9. Battery Charger.

0156-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 14

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED ENGINE ACCESSORIES AND CONNECTIONS Engine Crankcase Oil EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE Check oil level at dipstick. Level should be between ADD and FULL marks on ENGINE STOPPED side of dipstick. Add oil (NSN 9150-00-135-2634) as required.

RADIATOR CAP EMERGENCY DIESEL GENERATOR

RADIATOR

OIL FILL

DIPSTICK OIL FILTER AIR CLEANER


Figure 10. Engine Accessories and Connections.
I0280T73

0156-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 15

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EDG ENGINE CONTROL MONITOR (ECM) DISPLAY EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE a. Ensure that the Hertz gage reads 60.

b. Ensure that the voltmeter reads 460. 16 17 18 During During During 0.2 0.2 0.2 Low Oil Pressure Ensure that the low oil pressure indicator is Low oil pressure Indicator not illuminated. illuminated. High Coolant Temp Indicator Tachometer Check that the high coolant temp indicator High coolant temp is not illuminated. indicator is illuminated. Engine speed (1,800 rpm).

VOLTMETER

HERTZ GAGE
WARNING

RESET 0 3 2 1

LOW OIL PRESSURE INDICATOR HIGH COOLANT TEMP INDICATOR


I0282T73

Figure 11. 19 During 0.2

EDG Engine Control Monitor (ECM). Ensure that indicator lights, except GND FAULT, are lit. One or more indicator lights not lit.

LOAD CENTER

LOAD CENTER

PHASE A

PHASE B

PHASE C

GROUND DETECTION PRESS TO TEST LAPSE

I0281T73

Figure 12.

Load Center.

0156-9

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 20

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EDG STARTING BATTERIES Batteries, Terminals, and Connections EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE

WARNING

Avoid flame, spark, and other ignition sources when observing battery electrolyte levels. Batteries give off fumes that can explode. Electrolyte is an acid and can cause chemical burns and other injuries if it contacts skin and eyes. Wear approved goggles and a chemical protective apron. Failure to comply can result in serious injury or death.

NOTE
Top cover of battery box must be removed to check batteries. Inspect batteries, terminals, connections, cables, and vent caps for cleanliness and tightness. Any damage or failed connections.

CABLE TERMINAL CONNECTION NEGATIVE TERMINAL

TERMINAL CABLE CONNECTION

POSITIVE TERMINAL

VENT CAPS BATTERIES


Figure 13.
I0277T73

EDG Starting Batteries.

0156-10

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 21

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Terminal Connections EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE Clean or tighten terminal connections as required. Clean battery as required using a paste of clear water and baking soda. Rinse with clear water when finished. Check electrolyte level and check specific gravity of electrolyte with a hydrometer. Specific gravity should be 1.265. Check oil level at dipstick. Level should be between ADD and FULL marks on ENGINE STOPPED side of dipstick. Add oil (NSN 9150-00-135-2634) as required.

22

After

0.2

Electrolyte

If hydrometer readings are not satisfactory.

23

After

0.2

ENGINE ACCESSORIES AND CONNECTIONS Engine Crankcase Oil

RADIATOR CAP EMERGENCY DIESEL GENERATOR

RADIATOR

OIL FILL

DIPSTICK OIL FILTER AIR CLEANER


Figure 14. Engine Accessories and Connections.
I0280T73

0156-11

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 24

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

EMERGENCY Visually inspect the exterior of the Any critical controls or SWITCHBOARD switchboard for damaged or missing circuit meters unserviceable. breakers, meters, controls, and lights.

EMERGENCY SWITCHBOARD

I0274T73

Figure 15. Emergency Switchboard. 25 Weekly 0.4 BATTERY BOX Visually inspect the battery box for obvious Battery box is not damage, and ensure that the vent is not serviceable. obstructed.

BATTERY BOX COVER

BATTERY BOX

WING NUTS
I0276T73

Figure 16.

Battery Box.

0156-12

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 26

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EDG STARTING BATTERIES Batteries, Terminals, and Connections EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

WARNING

Avoid flame, spark, and other ignition sources when observing battery electrolyte levels. Batteries give off fumes that can explode. Electrolyte is an acid and can cause chemical burns and other injuries if it contacts skin and eyes. Wear approved goggles and a chemical protective apron. Failure to comply can result in serious injury or death.

NOTE
Top cover of battery box must be removed to check batteries. Inspect batteries, terminals, connections, cables, and vent caps for cleanliness and tightness. Any damage or failed connections.

CABLE TERMINAL CONNECTION NEGATIVE TERMINAL

TERMINAL CABLE CONNECTION

POSITIVE TERMINAL

VENT CAPS BATTERIES


Figure 17.
I0277T73

EDG Starting Batteries.

0156-13

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 27

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Terminal Connections EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Clean or tighten terminal connections as required. Clean battery as required using a paste of clear water and baking soda. Rinse with clear water when finished. Visually inspect tank for leaks. Check fuel oil level using sight glass.

28

Weekly

0.1

FUEL OIL DAY TANK

Any leaks.

FUEL OIL LEVEL GAGE

EMERGENCY DIESEL GENERATOR FUEL OIL DAY TANK


I0279T73

Figure 18. Fuel Oil Day Tank. 29 30 Weekly Weekly 0.2 0.2 Cooling System LOAD CENTER Check radiator coolant level. Inspect for secure mounting and obvious damage. Mounting not secure or obvious damage.

LOAD CENTER

PHASE A

PHASE B

PHASE C

GROUND DETECTION PRESS TO TEST LAPSE

I0281T73

Figure 19.

Load Center.

0156-14

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 31

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED TRANSFORME RS EQUIPMENT NOT READY/ AVAILABLE IF: Mounting not secure or obvious damage.

INTERVAL Weekly

PROCEDURE Inspect for secure mounting and obvious damage.

EMERGENCY TRANSFORMER BANK

I0283T73

Figure 20. 32 Monthly 0.2 BATTERY CHARGER

Transformers.

NOTE
A high reading indicates the batteries are weak and are being recharged or that one or more batteries are unserviceable. Check battery charger for proper Charger does not operate connections to battery. Ammeter should properly. read near 0 for trickle charge. If reading is above 3 amps, refer to Field Maintenance.

AMMETER

BATTERY CHARGER

I0275T73

Figure 21. Battery Charger.

0156-15

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 33

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Electrolyte EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

WARNING

Avoid flame, spark, and other ignition sources when observing battery electrolyte levels. Batteries give off fumes that can explode. Electrolyte is an acid and can cause chemical burns and other injuries if it contacts skin and eyes. Wear approved goggles and a chemical protective apron. Failure to comply can result in serious injury or death. Check electrolyte level and check specific gravity of electrolyte with hydrometer. Specific gravity should be 1.265. If hydrometer readings are not satisfactory.

CABLE TERMINAL CONNECTION NEGATIVE TERMINAL

TERMINAL CABLE CONNECTION

POSITIVE TERMINAL

VENT CAPS BATTERIES


Figure 22. Batteries.
I0277T73

0156-16

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 34

0156

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: Vent is obstructed.

INTERVAL Monthly

PROCEDURE

NATURAL VENT Ensure that vent is not obstructed and LOUVER screen is in place and serviceable. (PORT) RADIATOR INTAKE AND EXHAUST LOUVERS Cooling System Ensure that vent is not obstructed and screen is in place and serviceable.

35

Monthly

0.1

Vent is obstructed or screen unserviceable.

36

Annually

0.2

Check radiator coolant level.

RADIATOR CAP EMERGENCY DIESEL GENERATOR

RADIATOR

OIL FILL

DIPSTICK OIL FILTER AIR CLEANER


Figure 23.
I0284T73

Radiator Intake and Exhaust Louvers.

END OF TASK END OF WORK PACKAGE

0156-17/18 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00021)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION 02 LEVEL WEATHER DECKS

0157

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0157-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00022)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0157

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED LIFE RAFT EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING
Immediately report noted defects to your supervisor. Your life and that of the crew may depend on this equipment working in an emergency. Always use caution when inspecting the cylinder lanyard. Accidentally pulling this cable will cause the life raft to inflate, which could injure or kill personnel.

NOTE
Servicing must be done IAW life raft servicing schedule at a USCG approved facility. Crew servicing is limited to visual inspections only. Verify that certification has not expired. 2 Before 0.2 Container and Securing Hardware Hydrostatic Release Visually inspect container for dents or cracks which could leak water. Check cables and lanyards for chafing, cuts, or loose connectors. Check that the hydrostatic release is securely attached and undamaged. Certification has expired. Damage or defect of container or securing hardware. Hydrostatic release damaged or not securely attached.

Before

0.1

TIEDOWN STRAPS PACKING BAND

PACKING BAND FIBERGLASS CONTAINER

GASKET OPERATING CORD WEAK LINK CRADLE HYDROSTATIC RELEASE CONTAINERIZED MK-VII LIFE RAFT
I0285T73

Figure 1. Life Raft.

0157-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00022)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 4

0157

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED VARIOUS ORDNANCE STOWAGE LOCKERS Pyrotechnic Signal Locker EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

NOTE
When lockers contain ordnance, ensure that climate is monitored in accordance with ammunition handling instructions. Visually inspect locker for damage or missing parts. Verify that thermometer is functional and within calibration periodicity.

Before

0.2

Ammo Locker

Visually inspect locker for damage or missing parts. Verify that thermometer is functional and within calibration periodicity.

Before

0.2

Grenade MK3A1 Visually inspect locker for damage or Locker missing parts. Verify that thermometer is functional and within calibration periodicity. Grenade Fuse M206A1 Locker Visually inspect locker for damage or missing parts. Verify that thermometer is functional and within calibration periodicity.

Before

0.2

HEAT SHIELD DOG

THERMOMETER HOUSING ORDINANCE STOWAGE LOCKER THERMOMETER COVER

THERMOMETER GASKET
Figure 2.

LOCK
I0286T73

Various Ordnance Stowage Lockers.

0157-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00022)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 8

0157

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED AFT MAST EQUIPMENT NOT READY/ AVAILABLE IF: Structural cracks present or navigation lights damaged.

INTERVAL Before

PROCEDURE Inspect mast foundation for damage or cracks. Inspect navigation lights for mechanical damage.

AFT MAST

FWD
Figure 3. AFT Mast.

I0287T73

0157-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00022)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 9

0157

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED GUN MOUNTS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Inspect gun mounts for wear and damage. Gun mounts unserviceable.

CRADLE

CARRIAGE CARRIAGE PINTLE STAND SOCKET STAND PINTLE CLAMP MOUNTING HARDWARE
I0288T73

Figure 4.

Gun Mounts.

0157-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00022)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 10

0157

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED LIFE RAFT EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

WARNING
Immediately report noted defects to your supervisor. Your life and that of the crew may depend on this equipment working in an emergency. Always use caution when inspecting the cylinder lanyard. Accidentally pulling this cable will cause the life raft to inflate, which could injure or kill personnel.

NOTE
Servicing must be done IAW life raft servicing schedule at a USCG approved facility. Crew servicing is limited to visual inspections only. Verify that certification has not expired. 11 Weekly 0.2 Container and Securing Hardware Hydrostatic Release Visually inspect container for dents or cracks which could leak water. Check cables and lanyards for chafing, cuts, or loose connectors. Check that the hydrostatic release is securely attached and undamaged. Certification has expired. Damage or defect of container or securing hardware. Hydrostatic release damaged or not securely attached.

12

Weekly

0.1

TIEDOWN STRAPS PACKING BAND

PACKING BAND FIBERGLASS CONTAINER

GASKET OPERATING CORD WEAK LINK CRADLE HYDROSTATIC RELEASE CONTAINERIZED MK-VII LIFE RAFT
I0285T73

Figure 5. Life Raft.

0157-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00022)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 13

0157

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED VARIOUS ORDNANCE STOWAGE LOCKERS Pyrotechnic Signal Locker EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

NOTE
When lockers contain ordnance, ensure that climate is monitored in accordance with ammunition handling instructions. Visually inspect locker for damage or missing parts. Verify that thermometer is functional and within calibration periodicity.

14

Weekly

0.2

Ammo Locker

Visually inspect locker for damage or missing parts. Verify that thermometer is functional and within calibration periodicity.

15

Weekly

0.2

Grenade MK3A1 Visually inspect locker for damage or Locker missing parts. Verify that thermometer is functional and within calibration periodicity. Grenade Fuse M206A1 Locker Visually inspect locker for damage or missing parts. Verify that thermometer is functional and within calibration periodicity.

16

Weekly

0.2

HEAT SHIELD DOG

THERMOMETER HOUSING ORDINANCE STOWAGE LOCKER THERMOMETER COVER

THERMOMETER GASKET
Figure 6.

LOCK
I0286T73

Various Ordnance Stowage Lockers.

0157-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00022)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 17

0157

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED VENT COVER GASKETS EQUIPMENT NOT READY/ AVAILABLE IF: Gaskets are in an unserviceable condition.

INTERVAL Monthly

PROCEDURE Check that gaskets are clean and serviceable, and flapper closures are free and unobstructed.

VENTILATION DUCT WORK

GASKET
Figure 7.

VENTILATION HINGED COVER


I0289T73

Vent Cover Gaskets.

0157-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00022)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 18

0157

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED GUN MOUNTS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

Inspect gun mounts for wear and damage. Gun mounts unserviceable.

CRADLE

CARRIAGE CARRIAGE PINTLE STAND SOCKET STAND PINTLE CLAMP MOUNTING HARDWARE
I0288T73

Figure 8.

Gun Mounts.

END OF TASK END OF WORK PACKAGE

0157-9/10 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00022)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION RADIO ROOM

0158

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0158-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00023)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0158

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED RADIO ROOM DOOR ALARM Inspect Inspect EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Visually inspect security alarm system for obvious damage, missing parts, and tampering.

Before

0.2

NOTE
Notify pilothouse that alarm is to be tested. Open door and verify that both the alarm buzzer and light are energized. Set rotary snap switch to OFF position and verify that both the alarm buzzer is silent and the light is not lit. Reset the alarm and secure the door.

RADIO ROOM DOOR ALARM

ALARM SWITCH BOARD LOCATED IN THE PILOTHOUSE

RADIO ROOM DOOR OPEN INDICATOR

I0290T73

Figure 1. 3 Monthly 0.2 Inspect

Radio Room Door Alarm. Visually inspect security alarm system for obvious damage, missing parts, and tampering.

0158-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00023)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 4

0158

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Inspect EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

NOTE
Notify pilothouse that alarm is to be tested. Open door and verify that both the alarm buzzer and light are energized. Set rotary snap switch to OFF position and verify that both the alarm buzzer is silent and the light is not lit. Reset the alarm and secure the door.

RADIO ROOM DOOR ALARM

ALARM SWITCH BOARD LOCATED IN THE PILOTHOUSE

RADIO ROOM DOOR OPEN INDICATOR

I0290T73

Figure 2.

Radio Room Door Alarm.

0158-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00023)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 5

0158

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Radio Room Rooftop Air Conditioning Unit, Fan Unit EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

Inspect the fan unit to ensure the locking Locking tabs are broken or tabs are present and are locked into the wall missing. mounting brackets.

Monthly

0.2

Radio Room Inspect the air filters for blockage. Rooftop Air Conditioning Unit, Fan Unit, Air Filters Radio Room Rooftop Air Conditioning Unit, Fan Unit, Drain Inspect the drain to ensure that it allows water to drain from the fan unit. Drain is clogged.

Monthly

0.2

FILTERS

FAN COOLING UNIT

LOCKING TAB LOCKING TAB DRAIN LINE WALL MOUNTING BRACKET REFRIGERANT LINES
I0291T73

Figure 3. Radio Room Rooftop Air Conditioning Unit, Fan Unit, Air Filters, and Drain.

0158-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00023)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 8

0158

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Radio Room Rooftop Air Conditioning Unit, Remote EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL SemiAnnually

PROCEDURE Change batteries in the radio room rooftop air conditioning unit remote by removing the cover on the back of the radio room air conditioning unit remote. Replace the batteries with two 1.5 VDC AAA alkaline batteries and install the cover.

RADIO ROOM ROOFTOP AIR CONDITIONING UNIT REMOTE REAR VIEW

RST TA

TWO 1.5VDC AAA ALKALINE BATTERIES

REAR COVER
I0292T73

Figure 4.

Radio Room Rooftop Air Conditioning Unit, Remote.

END OF TASK END OF WORK PACKAGE

0158-5/6 blank

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00023)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION PILOTHOUSE

0159

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0159-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1 2

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.3 0.1 ITEM TO BE CHECKED OR SERVICED PILOTHOUSE CHART TABLE EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before Before

PROCEDURE Inspect pilothouse for cleanliness and stowage. Inspect table for secure mounting. Check that illumination control functions.

CHART TABLE

EMERGENCY STOP SWITCHES EXHAUST AND RECIRC FANS

FWD

GENERAL ALARM CONTACT MAKER


I0293T73

Figure 1. Chart Table.

0159-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 3

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED NAVIGATION LIGHTING PANEL Inspect Operation Alarm EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Visually inspect to ensure that all navigation lights operate properly when the respective light switches on the navigation lighting panel are in the primary and secondary position. Check that all lights are operative, and/or circuits function normally. Remove fuse. Ensure that alarm sounds.

4 5

Before Before

0.2 0.2

Alarm inoperative.

FUSES

ALARM INDICATORS

SECONDARY

OFF

PRIMARY

LIGHTS 3A MAX POWER PORT STARBOARD MASTHEAD STERN UPPER TOW/ REST. ABILITY TO MANEUVER LOWER TOW AFT TOW /UPPER AFT TOW /LOWER ANCHOR

ALARM

BLINKER

NUC
TEST

NAVIGATION LIGHTING PANEL ELC-1EP-NLP

REST. ABILITY TO MANEUVER DIMMER POWER POWER 10A MAX PILOT

I0294T73

Figure 2. Navigation Lighting Panel.

0159-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 6

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED GENERAL ALARM EQUIPMENT NOT READY/ AVAILABLE IF: Any bell or light does not function.

INTERVAL Before

PROCEDURE Sound the alarm, and ensure that all bells and lights operate in all compartments.

CHART TABLE

EMERGENCY STOP SWITCHES EXHAUST AND RECIRC FANS

FWD

GENERAL ALARM CONTACT MAKER


I0293T73

Figure 3. General Alarm.

0159-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 7

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

TRIM AND HEEL Inspect for obvious damage and secure CLINOMETERS mounting.

TRIM CLINOMETER

HEEL CLINOMETER

10

10

15 20
0

15
20
10 5

5
10
15 20

10

15
20

25

20 15

10 15

20

35

30

25

30

35

40
45

40

45

50
55

50

55

60

I0295T73

60

Figure 4.

Trim and Heel Clinometers.

0159-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 8

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED SHIP WHISTLE PULL VALVE Inspect Test EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE Visually inspect for damage.

Before

0.2

Operate whistle. Check that the valve operates smoothly and closes when released.

Whistle does not operate.

PILOTHOUSE CONSOLE

CLEARVIEW SCREEN

BOW THRUSTER CONTROL PANEL

EOT SHIP WHISTLE PULL VALVE

STBD

CONTROL AIR PRESSURE GAGE AND COMMAND TRANSFER


I0296T73

REMOTE PROPULSION INDICATOR PANEL


Figure 5. Ship Whistle Pull Valve.

0159-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 10

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PILOTHOUSE ALARM PANEL EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Visually inspect for obvious damage, press Obvious damage or the PRESS TO TEST button, and verify that alarms do not occur. alarm indications are functional.

PRESS TO TEST BUTTON

I0297T73

Figure 6. Pilothouse Alarm Panel.

0159-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 11

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 ITEM TO BE CHECKED OR SERVICED PILOTHOUSE CONSOLE EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

Inspect console for cleanliness. Clean as Any critical control or required. Look for any loose, missing, or indicator that is broken switches or controls, gages, unserviceable. indicator lights, or obvious damage. Ensure that throttle controls operate smoothly and do not bind. No communication with EOS.

12

Before

0.2

Engine Order Conduct test with the EOS to ensure Telegraph (EOT) communication. Move selector through each position ensuring corresponding indicator lights. Remote Propulsion Indicator Panel Press and hold LAMP TEST button. All lights should light. Adjust intensity of the lights using the DIMMER control.

13

Before

0.2

PILOTHOUSE CONSOLE

CLEARVIEW SCREEN

BOW THRUSTER CONTROL PANEL

EOT SHIP WHISTLE PULL VALVE

STBD

CONTROL AIR PRESSURE GAGE AND COMMAND TRANSFER


I0296T73

REMOTE PROPULSION INDICATOR PANEL


Figure 7. Pilothouse Console.

0159-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 14

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Fire Pump START/STOP Panel EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

CAUTION
Ensure that the fire pumps are properly aligned (Volume 3, WP 0070) prior to performing this check. Failure to comply with this caution will result in damage to the fire pumps. Press each remote START/STOP switch and ensure that each pump STARTs and STOPs properly. Switch will not START or STOP pumps.

NO. 1

FIRE PUMP START/STOP PANEL

NO. 2

FIRE PUMP REMOTE CONTROL


NOTE: VALVE ALIGNMENT OF STANDBY FIRE PUMP FOR FIREMAIN SERVICE SHALL BE MAINTAINED AT ALL TIMES.

I0298T73

Figure 8. Fire Pump START/STOP Panel.

0159-9

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 15

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED SEARCHLIGHTS Test EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING
DO NOT energize this circuit before first checking to ensure that the protective lamp cover has been removed. Use extreme care when performing maintenance work or operating the searchlight. Dangerously high voltage (over 50,000 V) is used in the lamp starting circuit. Test operate searchlights.

16

Before

0.2

Searchlight Control Panel

While operating the searchlight from the If both searchlights cannot searchlight control panel, have another be directed from the person verify that the searchlight moves in control panel. desired direction. Change SPEED control and operate the joystick to ensure that SPEED control operates properly. Operate focus switch to ensure that searchlight can be focused.

SEARCHLIGHT CONTROLS
SEARCHLIGHT
100
90

0
10

UP

80

20

SPEED

70

LEFT

RIGHT

30

DOWN OFF ON BEAM FOCUS START

STANDBY

OFF

Figure 9. Searchlight Control Panel.

0159-10

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

40
50

60

I0299T73

TM 55-1925-273-10-4 Table 1.
ITEM NO. 17

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Control Air Pressure Gage Command Transfer CLEARVIEW SCREENS Windows Control Box Exterior EQUIPMENT NOT READY/ AVAILABLE IF: Reading below 110 or above 140 PSI (7.6 or 9.7 bar).

INTERVAL Before

PROCEDURE With pilothouse console in command, ensure that the control air pressure gage reads approximately 125 PSI (8.6 bar).

18

Before

0.2

Test command transfer operation. Ensure Unable to transfer to that control operates smoothly. Verify ability control. to transfer control. Visually inspect windows for obvious damage and secure mounting. Visually inspect exterior for obvious damage and secure mounting. Window broken or not securely mounted, or motor is loose. Control box damage or not securely mounted.

19

Before

0.2

20

Before

0.2

PILOTHOUSE CONSOLE

CLEARVIEW SCREEN

BOW THRUSTER CONTROL PANEL

EOT SHIP WHISTLE PULL VALVE

STBD

CONTROL AIR PRESSURE GAGE AND COMMAND TRANSFER


I0296T73

REMOTE PROPULSION INDICATOR PANEL


Figure 10. Pilothouse Console and Clearview Screens.

0159-11

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 21 22

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 0.2 ITEM TO BE CHECKED OR SERVICED PILOTHOUSE NAVIGATION LIGHTING PANEL Inspect Operation EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During During

PROCEDURE Inspect pilothouse for cleanliness and stowage. Visually inspect to ensure that all navigation lights operate properly when the respective light switches on the navigation lighting panel are in the primary and secondary position. Check that all lights are operative, and/or circuits function normally.

23

During

0.2

FUSES

ALARM INDICATORS

SECONDARY

OFF

PRIMARY

LIGHTS 3A MAX POWER PORT STARBOARD MASTHEAD STERN UPPER TOW/ REST. ABILITY TO MANEUVER LOWER TOW AFT TOW /UPPER AFT TOW /LOWER ANCHOR

ALARM

BLINKER

NUC
TEST

NAVIGATION LIGHTING PANEL ELC-1EP-NLP

REST. ABILITY TO MANEUVER DIMMER POWER POWER 10A MAX PILOT

I0294T73

Figure 11. Navigation Lighting Panel.

0159-12

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 24

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

TRIM AND HEEL Inspect for obvious damage and secure CLINOMETERS mounting.

TRIM CLINOMETER

HEEL CLINOMETER

10

10

15 20
0

15
20
10 5

5
10
15 20

10

15
20

25

20 15

10 15

20

35

30

25

30

35

40
45

40

45

50
55

50

55

60

I0295T73

60

Figure 12.

Trim and Heel Clinometers.

0159-13

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 25

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED SHIP WHISTLE PULL VALVE Inspect Test EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE Visually inspect for damage.

26

During

0.2

Operate whistle. Check that the valve operates smoothly and closes when released.

Whistle does not operate.

27

During

0.2

PILOTHOUSE CONSOLE

Inspect console for cleanliness; clean as Any critical control or required. Look for any loose, missing, or indicator that is broken switches or controls, gages, unserviceable. indicator lights, or obvious damage. Ensure that throttle controls operate smoothly and do not bind. RUN LT should be lit. HI WTR TEMP LT and LO PRESS LT should not light. Verify operation of start/stop controls and RPM indicator. Adjust intensity lights using DIMMER control. HI WTR TEMP LT and LO PRESS LT illuminates or controls inoperative.

28

During

0.2

Bow Thruster Control Panel

PILOTHOUSE CONSOLE

CLEARVIEW SCREEN

BOW THRUSTER CONTROL PANEL

EOT SHIP WHISTLE PULL VALVE

STBD

CONTROL AIR PRESSURE GAGE AND COMMAND TRANSFER


I0296T73

REMOTE PROPULSION INDICATOR PANEL


Figure 13. Ship Whistle Pull Valve and Pilothouse Console.

0159-14

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 29

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Fire Pump START/STOP Panel EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

CAUTION
Ensure that the fire pumps are properly aligned (Volume 3, WP 0070) prior to performing this check. Failure to comply with this caution will result in damage to the fire pumps. Press each remote START/STOP switch and ensure that each pump STARTs and STOPs properly. Switch will not START or STOP pumps.

NO. 1

FIRE PUMP START/STOP PANEL

NO. 2

FIRE PUMP REMOTE CONTROL


NOTE: VALVE ALIGNMENT OF STANDBY FIRE PUMP FOR FIREMAIN SERVICE SHALL BE MAINTAINED AT ALL TIMES.

I0298T73

Figure 14. Fire Pump START/STOP Panel.

0159-15

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 30

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED SEARCHLIGHTS Searchlight Control Panel EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE

While operating the searchlight from the If both searchlights cannot searchlight control panel, have another be directed from the person verify that the searchlight moves in control panel. desired direction. Change SPEED control and operate the joystick to ensure that SPEED control operates properly. Operate focus switch to ensure that searchlight can be focused. Test operate searchlights.

31

During

0.2

Test

SEARCHLIGHT CONTROLS
SEARCHLIGHT
100
90

0
10

UP

80

20

SPEED

70

LEFT

RIGHT

30

DOWN OFF ON BEAM FOCUS START

STANDBY

OFF

Figure 15.

Searchlights.

0159-16

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

40
50

60

I0299T73

TM 55-1925-273-10-4 Table 1.
ITEM NO. 32

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Control Air Pressure Gage Command Transfer EQUIPMENT NOT READY/ AVAILABLE IF: Reading below 110 or above 140 PSI (7.6 or 9.7 bar).

INTERVAL During

PROCEDURE With pilothouse console in command, ensure that the control air pressure gage reads approximately 125 PSI (8.6 bar).

33

During

0.2

Test command transfer operation. Ensure Unable to transfer to that control operates smoothly. Verify ability control. to transfer control.

PILOTHOUSE CONSOLE

CLEARVIEW SCREEN

BOW THRUSTER CONTROL PANEL

EOT SHIP WHISTLE PULL VALVE

STBD

CONTROL AIR PRESSURE GAGE AND COMMAND TRANSFER


I0296T73

REMOTE PROPULSION INDICATOR PANEL


Figure 16. Control Air Pressure Gage and Command Transfer.

0159-17

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 34

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED CLEARVIEW SCREENS Operation Heater EQUIPMENT NOT READY/ AVAILABLE IF: Window does not spin.

INTERVAL During

PROCEDURE Turn ON the motor switch; ensure that MOTOR indicator is lit and screen spins.

35

During

0.2

Turn ON heater switch; ensure HEATER Heater does not work. indicator is lit. After 5 minutes place hand near, but not on screen; warmth should be felt.

CLEARVIEW SCREEN CONTROL BOX


VOLTS

CLEARVIEW SCREEN CONTROL BOX

HEATER

MOTOR

HEATER SWITCH
ON IMPORTANT TURN HEATER ON 20-30 MINUTES BEFORE STARTING MOTOR OFF OFF ON

MOTOR SWITCH

I0300T73

Figure 17.

Clearview Screens.

0159-18

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 36 37

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.3 0.1 ITEM TO BE CHECKED OR SERVICED PILOTHOUSE CHART TABLE EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly Weekly

PROCEDURE Inspect pilothouse for cleanliness and stowage. Inspect table for secure mounting. Check that illumination control functions.

CHART TABLE

EMERGENCY STOP SWITCHES EXHAUST AND RECIRC FANS

FWD

GENERAL ALARM CONTACT MAKER


I0293T73

Figure 18. Chart Table.

0159-19

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 38

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED NAVIGATION LIGHTING PANEL Inspect EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Visually inspect to ensure that all navigation lights operate properly when the respective light switches on the navigation lighting panel are in the primary and secondary position.

FUSES

ALARM INDICATORS

SECONDARY

OFF

PRIMARY

LIGHTS 3A MAX POWER PORT STARBOARD MASTHEAD STERN UPPER TOW/ REST. ABILITY TO MANEUVER LOWER TOW AFT TOW /UPPER AFT TOW /LOWER ANCHOR

ALARM

BLINKER

NUC
TEST

NAVIGATION LIGHTING PANEL ELC-1EP-NLP

REST. ABILITY TO MANEUVER DIMMER POWER POWER 10A MAX PILOT

I0294T73

Figure 19.

Navigation Panel.

0159-20

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 39 40

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 0.2 ITEM TO BE CHECKED OR SERVICED Operation Alarm EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly Weekly

PROCEDURE Check that all lights are operative, and/or circuits function normally. Remove fuse. Ensure that alarm sounds.

Alarm inoperative.

FUSES

ALARM INDICATORS

SECONDARY

OFF

PRIMARY

LIGHTS 3A MAX POWER PORT STARBOARD MASTHEAD STERN UPPER TOW/ REST. ABILITY TO MANEUVER LOWER TOW AFT TOW /UPPER AFT TOW /LOWER ANCHOR

ALARM

BLINKER

NUC
TEST

NAVIGATION LIGHTING PANEL ELC-1EP-NLP

REST. ABILITY TO MANEUVER DIMMER POWER POWER 10A MAX PILOT

I0294T73

Figure 20. Navigation Lighting Panel.

0159-21

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 41 42

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 1.0 0.1 ITEM TO BE CHECKED OR SERVICED GENERAL ALARM EQUIPMENT NOT READY/ AVAILABLE IF: Any bell or light does not function.

INTERVAL Weekly Weekly

PROCEDURE Sound the alarm, and ensure that all bells and lights operate in all compartments.

EMERGENCY Inspect panels for obvious damage or STOP missing or broken switches or indicators. SWITCHES FOR EXHAUST AND RECIRCULATIO N FANS

CHART TABLE

EMERGENCY STOP SWITCHES EXHAUST AND RECIRC FANS

FWD

GENERAL ALARM CONTACT MAKER


I0293T73

Figure 21.

General Alarm and Emergency Stop Switches For Exhaust and Recirculation Fans.

0159-22

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 43

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.1 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

TRIM AND HEEL Inspect for obvious damage and secure CLINOMETERS mounting.

TRIM CLINOMETER

HEEL CLINOMETER

10

10

15 20
0

15
20
10 5

5
10
15 20

10

15
20

25

20 15

10 15

20

35

30

25

30

35

40
45

40

45

50
55

50

55

60

I0295T73

60

Figure 22. 44 Weekly 1.0 PILOTHOUSE ALARM PANEL

Trim and Heel Clinometers. Visually inspect for obvious damage, press Obvious damage or the PRESS TO TEST button, and verify that alarms do not occur. alarm indications are functional.

PRESS TO TEST BUTTON

I0297T73

Figure 23.

Pilothouse Alarm Panel.

0159-23

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 45

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 3.0 ITEM TO BE CHECKED OR SERVICED PILOTHOUSE CONSOLE EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

Inspect console for cleanliness. Clean as Any critical control or required. Look for any loose, missing, or indicator that is broken switches or controls, gages, unserviceable. indicator lights, or obvious damage. Ensure that throttle controls operate smoothly and do not bind.

PILOTHOUSE CONSOLE

CLEARVIEW SCREEN

BOW THRUSTER CONTROL PANEL

EOT SHIP WHISTLE PULL VALVE

STBD

CONTROL AIR PRESSURE GAGE AND COMMAND TRANSFER


I0296T73

REMOTE PROPULSION INDICATOR PANEL


Figure 24. Pilothouse Console.

0159-24

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 46

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: No communication with EOS.

INTERVAL Weekly

PROCEDURE

Engine Order Conduct test with the EOS to ensure Telegraph (EOT) communication. Move selector through each position ensuring corresponding indicator lights. Remote Propulsion Indicator Panel Steering Control Panel Press and hold LAMP TEST button. All lights should light. Adjust intensity of the lights using the DIMMER control. Press the PANEL TEST pushbutton. All panel lights should light. Use dimmer to adjust the intensity of the lights. Any panel lights do not light. Visually inspect windows for obvious damage and secure mounting.

47

Weekly

0.2

48

Weekly

0.2

49

Weekly

0.2

CLEARVIEW SCREENS Windows

Window broken or not securely mounted, or motor is loose.

PILOTHOUSE CONSOLE

CLEARVIEW SCREEN

BOW THRUSTER CONTROL PANEL

EOT SHIP WHISTLE PULL VALVE

STBD

CONTROL AIR PRESSURE GAGE AND COMMAND TRANSFER


I0296T73

REMOTE PROPULSION INDICATOR PANEL


Figure 25. Clearview Screens.

0159-25

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 50

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Control Box Exterior EQUIPMENT NOT READY/ AVAILABLE IF: Control box damage or not securely mounted.

INTERVAL Weekly

PROCEDURE Visually inspect exterior for obvious damage and secure mounting.

CLEARVIEW SCREEN CONTROL BOX


VOLTS

CLEARVIEW SCREEN CONTROL BOX

HEATER

MOTOR

HEATER SWITCH
ON IMPORTANT TURN HEATER ON 20-30 MINUTES BEFORE STARTING MOTOR OFF OFF ON

MOTOR SWITCH

I0300T73

Figure 26. Clearview Screen Control Box.

0159-26

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 51

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED SEARCHLIGHTS Test EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE Test operate searchlights.

SEARCHLIGHT CONTROLS
SEARCHLIGHT
100
90

0
10

UP

80

20

SPEED

70

LEFT

RIGHT

30

DOWN OFF ON BEAM FOCUS START

STANDBY

OFF

Figure 27. Searchlights.

0159-27

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

40
50

60

I0299T73

TM 55-1925-273-10-4 Table 1.
ITEM NO. 52

0159

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PILOTHOUSE CONSOLE Command Transfer EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

Test command transfer operation. Ensure Unable to transfer to that control operates smoothly. Verify ability control. to transfer control.

PILOTHOUSE CONSOLE

CLEARVIEW SCREEN

BOW THRUSTER CONTROL PANEL

EOT SHIP WHISTLE PULL VALVE

STBD

CONTROL AIR PRESSURE GAGE AND COMMAND TRANSFER


I0296T73

REMOTE PROPULSION INDICATOR PANEL


Figure 28. Pilothouse Console.

END OF TASK END OF WORK PACKAGE

0159-28

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00024)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION PILOTHOUSE TOP AND MASTS

0160

INITIAL SETUP: Tools and Special Tools N/A Materials/Parts N/A Personnel Required N/A References N/A Equipment Condition N/A

0160-1

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 1

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MAGNETIC COMPASS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING
Radar and radio equipment transmit harmful radiation. Ensure that all transmitting devices are properly secured, locked out, and tagged out IAW FM 4-01.502 prior to allowing personnel to work on the pilothouse top and masts. Failure to comply may result in serious injury or death. a. When underway, check heading against gyro on two known courses. b. Check deviation whenever metal structural changes are made to the vessel, or when electronic equipment is added/ removed. c. Check that the deviation card is current and that the annual deviation card is located in immediate vicinity of the compass. d. Check the compensating magnets, Magnetic compass is inoperative and/or the and if damage is found, refer to Field compass will not swing Maintenance. freely in its gimbal.

0160-2

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

MAGNETIC COMPASS

MAGNETIC COMPASS VIEWER


I0301T73

Figure 1. Magnetic Compass.

0160-3

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 2

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED MAST AND YARDARM EQUIPMENT NOT READY/ AVAILABLE IF: Mast is damaged to the extent that navigational systems are not properly supported.

INTERVAL Before

PROCEDURE Inspect for mechanical damage to navigational equipment and ensure that lights are functional.

MAST AND YARDARM

I0302T73

Figure 2.

Mast and Yardarm.

0160-4

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 3

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED FIRE MONITORS EQUIPMENT NOT READY/ AVAILABLE IF: Not securely mounted. Excessive corrosion. Traversing lock does not secure monitor.

INTERVAL Before

PROCEDURE Inspect for secure mounting. Inspect exterior for damage, corrosion, or rust. Ensure that traversing lock locks monitor in place.

FIRE MONITOR

I0303T73

Figure 3. Fire Monitors.

0160-5

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 4

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED 500 W XENON SEARCH LIGHTS Lamp EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Before

PROCEDURE

WARNING
When hot, high pressures exist inside the lamp, and it could explode. Handle the lamp only in its protective cover, and remove the protective cover before energizing circuits. Wear eye protection and gloves when handling the lamp. Avoid direct exposure from the direct and reflected radiations given off by the lamp, even though the front cover glass provides protection from these radiations. Do not stand close to the searchlight front cover glass when the lamp is lighted. In the event of lamp explosion the front cover glass could break.

CAUTION
Operation of the lamp with finger marks or grease on the surface will cause deterioration of the quartz tube. Visually inspect lamp for blackening and cracks in quartz. If black or cracked, refer to Field Maintenance for repair.

500 WATT XENON SEARCH LIGHT

FRONT COVER GLASS


I0304T73

Figure 4. 500 W Xenon Searchlights.

0160-6

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 5

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MAGNETIC COMPASS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL During

PROCEDURE a. When underway, check heading against gyro on two known courses. b. Check deviation whenever metal structural changes are made to the vessel, or when electronic equipment is added/ removed. c. Check that the deviation card is current and that the annual deviation card is located in immediate vicinity of the compass.

d. Check the compensating magnets, Magnetic compass is inoperative and/or the and if damage is found, refer to Field compass will not swing Maintenance. freely in its gimbal.

MAGNETIC COMPASS

MAGNETIC COMPASS VIEWER


I0301T73

Figure 5. Magnetic Compass.

0160-7

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 6

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED FIRE MONITORS EQUIPMENT NOT READY/ AVAILABLE IF: Not securely mounted. Excessive corrosion. Traversing lock does not secure monitor. Valve does not operate. Class III leaks.

INTERVAL During

PROCEDURE Inspect for secure mounting. Inspect exterior for damage, corrosion, or rust. Ensure that traversing lock locks monitor in place. a. Ensure that valve operates smoothly. b. Observe pedestal, swivel, and monitor for leaks.

During

0.2

Valve and Leaks

FIRE MONITOR

I0303T73

Figure 6. Fire Monitor.

0160-8

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 8

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MAGNETIC COMPASS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL After

PROCEDURE a. When underway, check heading against gyro on two known courses. b. Check deviation whenever metal structural changes are made to the vessel, or when electronic equipment is added/ removed. c. Check that the deviation card is current and that the annual deviation card is located in immediate vicinity of the compass.

d. Check the compensating magnets, Magnetic compass is inoperative and/or the and if damage is found, refer to Field compass will not swing Maintenance. freely in its gimbal.

MAGNETIC COMPASS

MAGNETIC COMPASS VIEWER


I0301T73

Figure 7. Magnetic Compass.

0160-9

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 9

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED MAGNETIC COMPASS EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE a. When underway, check heading against gyro on two known courses. b. Check deviation whenever metal structural changes are made to the vessel, or when electronic equipment is added/ removed. c. Check that the deviation card is current and that the annual deviation card is located in immediate vicinity of the compass.

d. Check the compensating magnets, Magnetic compass is inoperative and/or the and if damage is found, refer to Field compass will not swing Maintenance. freely in its gimbal.

MAGNETIC COMPASS

MAGNETIC COMPASS VIEWER


I0301T73

Figure 8. Magnetic Compass.

0160-10

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 10

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.5 ITEM TO BE CHECKED OR SERVICED MAST AND YARDARM EQUIPMENT NOT READY/ AVAILABLE IF: Mast is damaged to the extent that navigational systems are not properly supported.

INTERVAL Weekly

PROCEDURE Inspect for mechanical damage to navigational equipment and ensure that lights are functional.

MAST AND YARDARM

I0302T73

Figure 9.

Mast and Yardarm.

0160-11

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 11

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED 500 W XENON SEARCH LIGHTS Reflector EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Weekly

PROCEDURE

WARNING
When hot, high pressures exist inside the lamp, and it could explode. Handle the lamp only in its protective cover, and remove the protective cover before energizing circuits. Wear eye protection and gloves when handling the lamp. Avoid direct exposure from the direct and reflected radiations given off by the lamp, even though the front cover glass provides protection from these radiations. Do not stand close to the searchlight front cover glass when the lamp is lighted. In the event of lamp explosion the front cover glass could break.

CAUTION
Operation of the lamp with finger marks or grease on the surface will cause deterioration of the quartz tube. Visually inspect for tarnishing, dirt buildup, or corrosion. Refer cleaning requirements to Field Maintenance. 12 Weekly 0.2 Front Cover Glass Case Visually inspect glass for defects or dirt buildup. Refer corrective action to Field Maintenance. Visually inspect the case for damage, dirt buildup, or corrosion. Refer for corrective action to Field Maintenance.

13

Weekly

0.2

0160-12

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO.

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL

PROCEDURE

500 WATT XENON SEARCH LIGHT

FRONT COVER GLASS


I0304T73

Figure 10. 500 W Xenon Searchlights. 14 Monthly 0.5 FIRE MONITORS Inspect for secure mounting. Inspect exterior for damage, corrosion, or rust. Ensure that traversing lock locks monitor in place. Not securely mounted. Excessive corrosion. Traversing lock does not secure monitor.

FIRE MONITOR

I0303T73

Figure 11. Fire Monitors.

0160-13

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 15

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED PILOTHOUSE AND RADIO ROOM ROOFTOP AIR CONDITIONING UNITS Pilothouse Rooftop Air Conditioning Units EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

Inspect the grill for proper mounting and Any panel missing, damage. Inspect panels to ensure that all foundation cracked, or panels and mounting hardware are present. foundation mounting hardware missing.

SIDE CONDENSER PANEL

SIDE CONDENSER PANEL FRONT CONDENSER PANEL

REAR CONDENSER PANEL

LOWER REAR PANEL

LOWER SIDE PANEL

I0305T73

Figure 12.

Pilothouse and Radio Room Rooftop Air Conditioning Units.

0160-14

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 16

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Pilothouse Rooftop Air Conditioning Units, Air Filters EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE Inspect the air filter for blockage.

PILOTHOUSE OVERHEAD

AIR FILTER

RETURN DUCT

GRILL
I0306T73

Figure 13.

Pilothouse and Radio Room Rooftop Air Conditioning Units, Air Filters.

0160-15

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 17

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Pilothouse Rooftop Air Conditioning Units, Electrical Connections Pilothouse Rooftop Air Conditioning Units, Fan Blade EQUIPMENT NOT READY/ AVAILABLE IF:

INTERVAL Monthly

PROCEDURE

Inspect the electrical connection to ensure Electrical wiring not that it is properly mounted and that the connected or wires are wires are not exposed. exposed.

18

Monthly

0.4

Inspect the fan blade for cracks and to ensure that the setscrew is present.

Fan blade is cracked or setscrew is missing.

FAN MOTOR

GRILL FAN BLADE

FAN MOTOR SHAFT

GRILL

SETSCREW

FRONT CONDENSER PANEL

FRONT PANEL ELECTRICAL CONNECTION

FAN MOTOR

FAN BLADE

I0307T73

Figure 14. Pilothouse and Radio Room Rooftop Air Conditioning Units, Electrical Connections, Fan Blade.

0160-16

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 1.
ITEM NO. 19

0160

Preventive Maintenance Checks and Services (PMCS) Including Lubrication - Continued.


MAN HOURS 0.2 ITEM TO BE CHECKED OR SERVICED Radio Room Rooftop Air Conditioning Unit, Condenser Unit Radio Room Rooftop Air Conditioning Unit, Condenser Unit, Electrical Connection Radio Room Rooftop Air Conditioning Unit, Condenser Unit, Fan Blade EQUIPMENT NOT READY/ AVAILABLE IF: Mounting hardware is missing, the foundation is cracked, or the panels are excessively damaged by corrosion.

INTERVAL Monthly

PROCEDURE Inspect the condenser unit mounting hardware to ensure that it is present. Inspect the condenser unit foundation for cracks. Inspect the condenser unit panels to ensure that they are present and that they are free from dents and corrosion.

20

Monthly

0.2

Inspect the electrical connection to ensure Electrical wiring not that it is properly mounted and that the connected or wires are wires are not exposed. exposed.

21

Monthly

0.4

Inspect the fan blades for cracked or broken Fan blades are cracked or blades. broken.

COVER

RADIO ROOM ROOFTOP AIR CONDITIONING UNIT, CONDENSER UNIT

FAN MOTOR FRONT PANEL

FAN BLADE

FOUNDATION GRILL

MOUNTING HARDWARE ELECTRICAL CONNECTION


I0308T73

Figure 15.

Pilothouse and Radio Room Rooftop Air Conditioning Unit, Condenser Unit.

0160-17

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4 Table 2. Equipment Pilothouse Rooftop Air Conditioning Units Radio Room Rooftop Air Conditioning Unit END OF TASK END OF WORK PACKAGE Refrigerant Specifications. Refrigerant R-22 R-22

0160

0160-18

03/15/2011 Rel(1.8) root(pmcswp) wpno(I00025)

TM 55-1925-273-10-4

CHAPTER 8 MAINTENANCE INSTRUCTIONS FOR LT-800 SERIES

TM 55-1925-273-10-4 OPERATOR MAINTENANCE INLAND AND COASTAL LARGE TUG (LT) MAINTENANCE

0161

INITIAL SETUP: Not Applicable

Large Tug Maintenance Publications. All maintenance for the Inland and Coastal Large Tug (LT) is contained in the technical manuals listed in Table 1. Refer to these technical manuals for all maintenance instructions. Table 1. System Air Compressor Bow Thruster Bow Thruster Engine C4ISR Commissary Equipment Deck Machinery and Hydraulic System Emergency Breathing Air Compressor/Stainless Steel (E-BAC/SS) Engine Room Monitoring System Environmental Control Subsystem Firefighting, Fire Alarm and Fire Suppression Systems Fuel Filter/Water Separator (Fuel Transfer) System Generator Set, Emergency Generator Set, Emergency Generator Set, Ship's Service Generator Set, Ship's Service Global Maritime Distress and Safety System (GMDSS) Large Tug Maintenance Publications. Technical Manual Number TM 55-1925-286-13&P TM 55-1925-214-24&P TM 55-1925-212-24&P TM 55-5825-311-10 TM 55-1925-226-24&P TM 55-1925-294-14&P TM 10-4310-503-13&P TM 55-1925-225-24&P TM 55-1925-224-24&P TM 55-1925-292-14&P TM 55-1925-283-13&P TM 55-1925-210-24 TM 55-1925-210-24P TM 55-1925-209-24 TM 55-1925-209-24P TM 55-5830-283-10

0161-1

03/15/2011 Rel(1.8) root(maintwp) wpno(M00001)

TM 55-1925-273-10-4 Large Tug Maintenance Publications - Continued. Table 1. Large Tug Maintenance Publications - Continued. System Laundry Equipment Lubrication Oil Purification System Main Propulsion Engines Main Propulsion Engines Main Reduction Gear Marine Sanitation Device Oil Water Separator (OWS) Operator's Manual Propulsion Controls Propulsion Shaft Couplings, Brakes and Seals Pump Drive Engine Pump Drive Engine Refrigeration Machinery Reverse Osmosis Water Purification Unit (ROWPU) Self-Contained Breathing Apparatus (SCBA) Steering Gear System Field and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Inland and Coastal Large Tug (LT) Shipboard Damage Control Manual for Inland and Coastal Large Tug (LT) Work Boat Work Boat Motor END OF TASK END OF WORK PACKAGE Technical Manual Number TM 55-1925-233-24&P TM 55-1925-213-24&P TM 55-1925-208-24 TM 55-1925-208-24P TM 55-1925-223-24&P TM 55-1925-284-14&P TM 55-1925-285-13&P TM 55-1925-273-10 TM 55-1925-222-24&P TM 55-1925-228-24&P TM 55-1925-211-24 TM 55-1925-211-24P TM 55-1925-231-24&P TM 55-1925-282-14&P TM 10-4240-343-13&P TM 55-1925-215-24&P TM 55-1925-273-24&P

0161

TM 55-1925-273-SDC TM 55-1945-224-14&P TM 55-1945-221-14&P

0161-2

03/15/2011 Rel(1.8) root(maintwp) wpno(M00001)

TM 55-1925-273-10-4

CHAPTER 9 SUPPORTING INFORMATION FOR LT-800 SERIES

TM 55-1925-273-10-4 OPERATOR MAINTENANCE REFERENCES

0162

This work package lists all field manuals, forms, technical manuals, and miscellaneous publications referenced in this manual. FIELD MANUALS FM 3-11.5 Multiservice Tactics, Techniques, and Procedures for Chemical, Biological, Radiological, and Nuclear Decontamination Army Watercraft Safety First Aid

FM 4-01.502 FM 4-25.11

TECHNICAL MANUALS TM 38-470 TM 55-1925-208-24 Storage and Maintenance of Army Prepositioned Stock Materiel Field and Sustainment Maintenance Manual for Main Propulsion Engine Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Repair Parts and Special Tools List for Main Propulsion Engine Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Manual for Ship's Service Generator Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Repair Parts and Special Tools List for Ship's Service Generator Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Manual for Emergency Generator Set Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Repair Parts and Special Tools List for Emergency Generator Set Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Manual for Pump Drive Engine Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Repair Parts and Special Tools List for Pump Drive Engine Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG)

TM 55-1925-208-24P

TM 55-1925-209-24-1 TM 55-1925-209-24-2 TM 55-1925-209-24P

TM 55-1925-210-24

TM 55-1925-210-24P

TM 55-1925-211-24

TM 55-1925-211-24P

0162-1

03/15/2011 Rel(1.8) root(refwp) wpno(S00001)

TM 55-1925-273-10-4

0162

TECHNICAL MANUALS - Continued TM 55-1925-212-24&P Field and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Bow Thruster Engine Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Lube Oil Purification System Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Bow Thruster Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Steering Gear System Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Propulsion Controls Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Main Reduction Gear Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Environmental Control Subsystem Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Engine Room Monitoring System Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Commissary Equipment Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Propulsion Shaft Couplings, Brakes, and Seals Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Refrigeration Machinery Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG)

TM 55-1925-213-24&P

TM 55-1925-214-24&P

TM 55-1925-215-24&P

TM 55-1925-222-24&P

TM 55-1925-223-24&P

TM 55-1925-224-24&P

TM 55-1925-225-24&P

TM 55-1925-226-24&P

TM 55-1925-228-24&P

TM 55-1925-231-24&P

0162-2

03/15/2011 Rel(1.8) root(refwp) wpno(S00001)

TM 55-1925-273-10-4

0162

TECHNICAL MANUALS - Continued TM 55-1925-233-24&P Field and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Laundry Equipment Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Field and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Shipboard Damage Control Manual for Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Operator, Field, and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Reverse Osmosis Water Purification Unit Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Operator and Field Maintenance Manual Including Repair Parts and Special Tools List for Fuel Filter/Water Separator (Fuel Transfer System) Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Operator, Field, and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Marine Sanitation Device for Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Operator and Field Maintenance Manual Including Repair Parts and Special Tools List for Oil Water Separator Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Operator and Field Maintenance Manual Including Repair Parts and Special Tools List for Air Compressor for Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Operator, Field, and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Fire Fighting, Fire Alarm, and Fire Suppression Systems for Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Operator, Field, and Sustainment Maintenance Manual Including Repair Parts and Special Tools List for Deck Machinery and Hydraulic System for Inland and Coastal Large Tug (LT) NSN 1925-01-509-7013 (EIC XAG) Operator, Unit, Direct Support, and General Support Maintenance Manual (Including Repair Parts and Special Tools List) for Boat, Inflatable, Rigid Hull (Zodiac) Model M B-10005 H472 September 1993, Zodiac of North America, Inc. NSN 1940-01-505-1621 Operator, Unit, Direct Support, and General Support Maintenance Manual (Including Repair Parts and Special Tools List) for Outboard Motor (Johnson-OMC) Model #70 2000 Outboard Motor Corporation NSN 2805-01-505-1613

TM 55-1925-273-24&P-1 TM 55-1925-273-24&P-2 TM 55-1925-273-SDC TM 55-1925-282-14&P

TM 55-1925-283-13&P

TM 55-1925-284-14&P

TM 55-1925-285-13&P

TM 55-1925-286-13&P

TM 55-1925-292-14&P

TM 55-1925-294-14&P

TM 55-1945-224-14&P

TM 55-1945-221-14&P

0162-3

03/15/2011 Rel(1.8) root(refwp) wpno(S00001)

TM 55-1925-273-10-4

0162

TECHNICAL MANUALS - Continued TM 55-5825-311-10 Operator's Manual for U.S. Army Watercraft Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance (C4ISR) Suite NSN 5825-01-508-2901 Operator's Manual for U.S. Army Watercraft Global Maritime Distress and Safety System (GMDSS) NSN 5830-01-528-6276 Field Maintenance Manual (Including Repair Parts and Special Tools List) for Self-Contained Breathing Apparatus (SCBA) 45 Minute NSN 4240-01-545-9605 Field Maintenance Manual (Including Repair Parts and Special Tools List) for Emergency Breathing Air Compressor/ Stainless Steel (E-BAC/SS) NSN 4310-01-541-4359 Procedures for Destruction of Tank-Automotive Equipment to Prevent Enemy Use

TM 55-5830-283-10

TM 10-4240-343-13&P

TM 10-4310-503-13&P

TM 750-244-6

TECHNICAL BULLETINS STP 21-1-SMCT TB 55-1900-232-10 TB 740-97-4 Soldier's Manual of Common Tasks Warrior Skills Level 1 U.S. Army Towing Manual Preservation of Vessels for Storage

FORMS AND PAMPHLETS DA Form 2028 DA Form 2404 DA Form 2407 DA Form 2408-9 DA Form 4640 DA Form 4993 DA PAM 750-8 SF Form 368 Recommended Changes to Equipment Publications and Blank Forms Equipment Inspection and Maintenance Worksheet Maintenance Request Equipment Control Record Harbor Boat Deck Department Log for Class A&B Vessels Harbor Boat Engine Department Log for Class A and C-1 Vessels The Army Maintenance Management System (TAMMS) Users Manual Product Quality Deficiency Report

0162-4

03/15/2011 Rel(1.8) root(refwp) wpno(S00001)

TM 55-1925-273-10-4

0162

HANDBOOKS AND STANDARDS MIL-HDBK-113 C Guide for the Selection of Lubricants, Functional Fluids, Preservatives, and Specialty Products for Use in Ground Equipment Systems Guide for the Selection of Lubricant Fluids and Compounds for Use in Flight Vehicles and Components

MIL-HDBK-275 A

END OF WORK PACKAGE

0162-5/6 blank

03/15/2011 Rel(1.8) root(refwp) wpno(S00001)

TM 55-1925-273-10-4

0163

OPERATOR MAINTENANCE COMPONENTS OF END ITEM (COEI)/ON-BOARD SPARES LIST (OBSL) AND BASIC ISSUE ITEMS (BII) LISTS

INTRODUCTION Scope This work package lists COEI/OBSL and BII for the Inland and Coastal Large Tug (LT) to help you inventory items for safe and efficient operation of the equipment. General The COEI/OBSL and BII information is divided into the following lists: Components of End Item (COEI)/On-Board Spares List (OBSL). This list is for information purposes only and is not authority to requisition replacements. These items are part of the Inland and Coastal Large Tug (LT). As part of the end item, these items must be with the end item whenever it is issued or transferred between property accounts. Items of COEI are removed and separately packaged for transportation or shipment only when necessary. Illustrations are furnished to help you find and identify items. On-board spare parts are those items recommended by the contractor and manufacturer to be kept on-hand for quick and immediate maintenance access. OBSL starts with Item 161. Basic Issue Items (BII). These essential items are required to place the Inland and Coastal Large Tug (LT) in operation, operate it, and to do emergency repairs. Although shipped separately packaged, BII must be with the Inland and Coastal Large Tug (LT) during operation and when it is transferred between property accounts. Listing these items is your authority to request/requisition them for replacement based on authorization of the end item by the TOE/MTOE. Illustrations are furnished to help you find and identify items. Explanation of Columns in the COEI/OBSL and BII List Column (1) - Item Number. Gives you the reference number of the item listed. Column (2) - National Stock Number (NSN) and Illustration. Identifies the stock number of the item to be used for requisitioning purposes and provides an illustration of the item. Column (3) - Description, Part Number/(CAGEC). Identifies the Federal item name (in all capital letters) followed by a minimum description when needed. The stowage location of COEI/OBSL and BII is also included in this column. The last line below the description is the part number and the Commercial and Government Entity Code (CAGEC) (in parentheses). Column (4) - Usable On Code. When applicable, gives you a code if the item you need is not the same for different models of equipment. Column (5) - U/I. Unit of Issue (U/I) indicates the physical measurement or count of the item as issued per the NSN shown in column (2). Column (6) - Qty Rqr. Indicates the quantity required.

0163-1

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. (1) ITEM NUMBER 1 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION Components of End Item/On-Board Spares List. (3) DESCRIPTION, PART NUMBER/(CAGEC) AC POWER STRIP (BLACK BOX) (LT 803 Only) (POWER SYSTEM) (Radio Equipment Rack #2) SP472A (OUAT5) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

6130-01-478-7796

ADAPTER, BATTERY CHARGER (Pilothouse) BC124 (62526)

128

EA

AIR CONDITIONER, PILOTHOUSE (HEAT PUMP) (Pilothouse Top) 50JS-030-5-AU (10855)

128

EA

AIR CONDITIONER, RADIO ROOM (INDOOR UNIT) (Radio Room) 40QNB012-3 (10855) AIR CONDITIONER, RADIO ROOM (OUTDOOR UNIT) (Pilothouse Top) 38AN-012-3 (10855)

128

EA

128

EA

0163-2

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List - Continued. (1) ITEM NUMBER 6 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) AIR CONDITIONING PLANT (AMS#2) 90DF400004-1 (10855) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

7
NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

2
CONTROL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

2
STEERING FILTER DIRTY

FU CONTROL

NautoConning 1
FEEDER CB OPEN PUMP OIL LEVEL CONTROL

NautoAlarm Conning
CONTROL VOLTAGES PHASE FAILURE CONTROL

1
POWER FAILURE

1
CONTROL

1
OVERLOAD

2 Set
CONTROL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

Esc

Menu

1
STEERING FILTER DIRTY

Test

FU CONTROL

STEERING FILTER DIRTY

FU CONTROL

Test Signal Unit TEST


STEERING FAILURE

Repeater

NautoPilot NP2030
Heading Control Heading

9
8

Gyro Magnet

119.4 119
Set Course

ParaMeter

Control Preset

GyroCompass

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Test

Steering Mode

0 10 10
Auto Pilot

Change-Over-Switch
PUMP 1 ON PUMP 2 ON

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

Test

Track Control

R.o.T. Tiller

Radius R.o.T.

External

Set

Stbd

5985-01-472-2600

Test

ALARM, NAUTO (Pilothouse, FWD, Center, Compilot 20 Steering Stand) (52315)

128

EA

1
2

3
4 5 6

ANTENNA ASSEMBLY (Top of Pilothouse) M28346 (49956)

128

EA

5985-01-472-2600

ANTENNA ASSEMBLY M28342 (49956)

128

EA

10

ANTENNA, DGPS, MX 421LEICA (Mast, Port and Starboard) 17011 (52315)

128

EA

0163-3

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List - Continued. (1) ITEM NUMBER 11 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5985-01-389-0935 (3) DESCRIPTION, PART NUMBER/(CAGEC) ANTENNA,GMDSS SAT "C" (Mast Top, Port) 55.747 Thrane and Thrane (03956) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

12

5985-01-471-7205

ANTENNA, MF/HF (GMDSS) (Top of Port Smoke Stack) Shakespeare, 222 (23657)

128

EA

13

ANTENNA, NAVTEX RECEIVER (Pilothouse Top, Starboard) COMROD AV-42 (LT 803 Only), Shakespeare 390 (All Other Vessels) (23657)

128

EA

14

ANTENNA, RF TRANSCEIVER, FLEET 77 (Top of Pilothouse, Starboard Aft) TT-3008C (00853)

128

EA

0163-4

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List - Continued. (1) ITEM NUMBER 15 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) ANTENNA, TV & RADIO (Top of Pilothouse, Port) Navel Electronics, TV Antenna MK 12 (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

16

5985-01-524-5154

ANTENNA, VHF WHIP (GMDSS) (ROSS/SAILOR RADIO) (Top of Pilothouse, Starboard Fwd, and Port Aft) 5225-XT (23657)

128

EA

17

ANTENNA, WATCH RECEIVER (Pilothouse Top, Port) COMROD AV-42 (23657)

128

EA

18

5985-01-052-1272

ANTENNA, WHIP (GMDSS CONSOLE) GMDSS VHF/ DSC RADIO (Top of Pilothouse, Port Forward and Starboard Aft) 390-1 (23657)

128

EA

0163-5

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List - Continued. (1) ITEM NUMBER 19 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION
NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

0163

(3) DESCRIPTION, PART NUMBER/(CAGEC) AUTOPILOT 2035 OPERATOR UNIT (Pilothouse, FWD, Center, Compilot 20 Steering Stand) 102-885SA004 (52315)
Stbd

(4) USABLE ON CODE 128

(5)

(6) QTY RQR 1

U/I EA

NautoConning 1
FEEDER CB OPEN PUMP OIL LEVEL CONTROL

NautoAlarm Conning
CONTROL VOLTAGES PHASE FAILURE CONTROL

1
POWER FAILURE

1
CONTROL

1
OVERLOAD

2 Set
CONTROL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

Esc

Menu

1
STEERING FILTER DIRTY

Test

FU CONTROL

STEERING FILTER DIRTY

FU CONTROL

Test Signal Unit TEST


STEERING FAILURE

Repeater

NautoPilot NP2030
Heading Control Heading

Gyro Magnet

119.4 119

Track Control

ParaMeter

Control Preset

GyroCompass

Set Course

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Test

Steering Mode

10
Change-Over-Switch
PUMP 1 ON PUMP 2 ON

0 10
Auto Pilot

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

20

Test
R.o.T. Tiller Radius R.o.T. External

2
3

21

22

6605-01-532-4877

NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

NautoConning 1
FEEDER CB OPEN PUMP OIL LEVEL CONTROL

NautoAlarm Conning
CONTROL VOLTAGES PHASE FAILURE CONTROL

1
POWER FAILURE

1
CONTROL

1
OVERLOAD

2 Set
CONTROL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

Esc

Menu

1
STEERING FILTER DIRTY

Test

FU CONTROL

STEERING FILTER DIRTY

FU CONTROL

Test Signal Unit TEST


STEERING FAILURE

Repeater

NautoPilot NP2030
Heading Control Heading

9
8

0
1
ParaMeter

Gyro Magnet

119.4 119
Set Course

Control Preset

GyroCompass

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Test

Steering Mode

10
Change-Over-Switch
PUMP 1 ON PUMP 2 ON

0 10
Auto Pilot

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

Test

Track Control

R.o.T. Tiller

Radius R.o.T.

External

Set

Stbd

23

4 5
Repeater

6
2
3

Set

BAG, STOWAGE, SCBA (Damage Control Locker) 7246014-001 (31644)

128

EA

BAROMETRIC PRESSURE SENSOR (Mast, Port Side) 61202 F.M. Young Company (52315)

128

EA

BEARING REPEATER (Pilothouse, FWD, Center, Compilot 20 Steering Stand) 133-406NG001 (7H422)
9

128

EA

1
2

4 5

BEARING SIGHT (Pilothouse Top, Mounted on Peloris Stand) 143-024 (52315)

128

EA

0163-6

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 24 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) BELOW DECK UNIT (BDU) FLEET 77 (SATCOM SYSTEM) (Radio Equipment Rack #3) (LT 803 Only) TT3038C (00853) 1940-01-505-1621 BOAT, RIGID INFLATABLE (01 DECK, AFT) E34298 (34712) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

25

128

EA

26

BRACKET, H250U HANDSET (All Vessels Except LT 803) (VIC-3 REMOTE STATIONS) (Radio Station Desk) 99-200062 (OJDM6)

128

EA

27

C-21 ECDIS W/CONSOLE (Pilothouse, Next to Chart Table) 950-001.NG002 (52315)

128

EA

28

C-29 ECDIS W/CONSOLE (Pilothouse, STBD) 950-002.NG001 (52315)

128

EA

0163-7

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 29 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5930-01-266-0705 (3) DESCRIPTION, PART NUMBER/(CAGEC) CHANGEOVER SWITCH (Pilothouse, FWD, Center, Compilot 20 Steering Stand) E060-70011412 (10855)
Heading Control Heading Track Control

0163

(4) USABLE ON CODE 128

(5)

(6) QTY RQR 1

U/I EA

NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

NautoConning 1
FEEDER CB OPEN PUMP OIL LEVEL CONTROL

NautoAlarm Conning
CONTROL VOLTAGES PHASE FAILURE CONTROL

1
POWER FAILURE

Change-Over-Switch

1
CONTROL

1
OVERLOAD

2 Set
CONTROL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

Esc

Menu

1
STEERING FILTER DIRTY

Test

FU CONTROL

STEERING FILTER DIRTY

FU CONTROL

Test

MAIN ECDIS

Backup ECDIS

Signal Unit TEST


STEERING FAILURE

Repeater

NautoPilot NP2030

9 0

Gyro Magnet

119.4 119

ParaMeter

Control Preset

GyroCompass

Set Course

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Test

Steering Mode

0 10 10
Auto Pilot

Change-Over-Switch
PUMP 1 ON PUMP 2 ON

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

Test
R.o.T. Tiller Radius R.o.T. External

30

4540-01-344-1508

PULL

31

32

4 5

Set

Stbd

COMPACTOR, TRASH, INDUSTRIAL (Galley) 1800SS (53820)

128

EA

COMPUTER, RACK MOUNTED (LT 803 Only) (DATA EQUIPMENT) (Radio Equipment Racks #2 and #3) 105-000-1U-1 (0JDM6)

128

EA

COMPUTER, RACKMOUNT 2U, STS-3221 (All Vessels Except LT 803) (DATA EQUIPMENT) (Radio Rack) CPQ2584B3 (1YEK4)

128

EA

0163-8

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 33
"SAILOR"
DT4646E DATA TERMINAL

0163

(2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION


SCAN "SAILOR" RT4822 VHF DSC RX LOG TX CALL ADDR BOOK TEL/ DSC DIM 7 P SHIFT 0 16 1 SELCALL T/R 4 U.S. 8 SCAN ADD 2 SCAN TIME 5 1W 9 SCAN DELETE 3 D.W. 6 ON/ OFF "SAILOR"
TX CALL ALARM TEL/ DSC HC4500 MF/HF CONTROL UNIT RX LOG TX CALL ADDR BOOK

(3) DESCRIPTION, PART NUMBER/(CAGEC) CONSOLE, THREE BAY, (SAILOR-C4693A) (COMPONENT OF GMDSS SUITE) (Pilothouse, Aft, Starboard) 82469310 (0U8J3)

(4) USABLE ON CODE 128

(5)

(6) QTY RQR 1

U/I EA

"SAILOR"

DT4646E DATA TERMINAL

> Rx 4375.0 kHz Tx 4065.0 kHz

1 6

2 7

3 8

2182 DIST FREQ

DISTRESS

9 . 0 .

SHIFT

ON/ OFF

BATTERY 1
EMERGENCY LIGHT

BATT 12

DIM

BATTERY 2
1 BATTERY ALARM 2 1 AC ALARM 2 TEST

34

5895-01-382-3221

CONTROL INDICATOR (LT 803 Only) (VIC-3 REMOTE STATIONS) (Radio Equipment Rack #3) A3205747 (80063)

128

EA

35

CONTROL INTERCOM SET FFCS (LT 803 Only) (VIC-3 REMOTE STATIONS) (Radio Equipment Rack #2) A3205746 (80063)

128

EA

36

NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

NautoConning 1
FEEDER CB OPEN PUMP OIL LEVEL CONTROL

NautoAlarm Conning
CONTROL VOLTAGES PHASE FAILURE CONTROL

1
POWER FAILURE

1
CONTROL

1
OVERLOAD

2 Set
CONTROL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

Esc

Menu

1
STEERING FILTER DIRTY

Test

FU CONTROL

STEERING FILTER DIRTY

FU CONTROL

Test Signal Unit TEST


STEERING FAILURE

Repeater

NautoPilot NP2030
Heading Control Heading

9
8

Gyro Magnet

119.4 119
Set Course

ParaMeter

Control Preset

GyroCompass

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Test

Steering Mode

10
Change-Over-Switch
PUMP 1 ON PUMP 2 ON

0 10
Auto Pilot

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

Test

Track Control

R.o.T. Tiller

CONTROL PANEL, NAUTOCONNING (Pilothouse, FWD, Center, Compilot 20 Steering Stand) 136 121NG001 (52315)
Stbd

128

EA

1
2
3

Radius R.o.T.

External

4 5

Set

0163-9

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 37
"SAILOR"
DT4646E DATA TERMINAL

0163

(2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION


SCAN "SAILOR" RT4822 VHF DSC RX LOG TX CALL ADDR BOOK TEL/ DSC DIM 7 P SHIFT 0 16 1 SELCALL T/R 4 U.S. 8 SCAN ADD 2 SCAN TIME 5 1W 9 SCAN DELETE 3 D.W. 6 ON/ OFF "SAILOR"
TX CALL ALARM TEL/ DSC HC4500 MF/HF CONTROL UNIT RX LOG TX CALL ADDR BOOK

(3) DESCRIPTION, PART NUMBER/(CAGEC) CONTROL UNIT, RADIO, MF/ HF, (SAILOR-HC 4500) (COMPONENT OF GMDSS SUITE) (Pilothouse, Aft, Starboard) 80450010 (0U8J3)

(4) USABLE ON CODE 128

(5)

(6) QTY RQR 1

U/I EA

"SAILOR"

DT4646E DATA TERMINAL

> Rx 4375.0 kHz Tx 4065.0 kHz

1 6

2 7

3 8

2182 DIST FREQ

DISTRESS

9 . 0 .

SHIFT

ON/ OFF

BATTERY 1
EMERGENCY LIGHT

BATT 12

DIM

BATTERY 2
1 BATTERY ALARM 2 1 AC ALARM 2 TEST

38

CONTROL UNIT (All Vessels Except LT 803) (UHF/VHF RADIO SYSTEM) (Radio Station Desk) FS2570-C (00KH0)

128

EA

39

CONTROLLER, DATA, VDC-200 (All Vessels Except LT 803) (DATA EQUIPMENT) (Radio Station Desk) SI-004282-0001 (47358)

128

EA

40

5985-01-459-5388

COUPLER, ANTENNA, HF (Inside Top Of STBD Smoke Stack, STBD Bulkhead) 10208-5025-05 (14304)

128

EA

0163-10

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 41 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5985-01-471-0271 (3) DESCRIPTION, PART NUMBER/(CAGEC) COUPLER, ANTENNA, MF/HF (SAILOR HA4525) (Inside Top Of Port Stack) 80452500 (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

42

DATA SWITCH MANUAL (LT 803 Only) (DATA EQUIPMENT) (Radio Equipment Rack #2) 98 200986 (OJDM6)

128

EA

43
"SAILOR"
DT4646E DATA TERMINAL

SCAN "SAILOR" RT4822 VHF DSC RX LOG TX CALL ADDR BOOK TEL/ DSC DIM 7 P 1 SELCALL T/R 4

SCAN ADD 2 SCAN TIME 5 U.S. 8 SHIFT

SCAN DELETE 3 D.W. 6 1W 9

16

ON/ OFF

"SAILOR"
TX CALL ALARM

HC4500 MF/HF CONTROL UNIT

RX LOG TX CALL ADDR BOOK TEL/ DSC

"SAILOR"

DT4646E DATA TERMINAL

> Rx 4375.0 kHz Tx 4065.0 kHz

1 6

2 7

3 8

2182 DIST FREQ

DISTRESS

9 . 0 .

SHIFT

ON/ OFF

BATTERY 1
EMERGENCY LIGHT

BATT 12

DIM

BATTERY 2
1 BATTERY ALARM 2 1 AC ALARM 2 TEST

DATA TERMINAL, (SAILORDT) (COMPONENT OF GMDSS SUITE) (Pilothouse, Aft Starboard) 85464610 (0U8J3)

128

EA

44

DC BREAKER PANEL W/ BREAKERS (BLACK BOX) (LT 803 Only) (POWER SYSTEM) (Radio Equipment Rack #2) 98-200970 (OUAT5)

128

EA

0163-11

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 45 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) DC BREAKER PANEL W/ BREAKERS (BLACK BOX) (POWER SYSTEM) (Radio Rack) (All Vessels Except LT 803) 98-200970 (OUAT5) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

46
SAL SDI -7

WT Spd

Distance Trip Total 0735 02 Trip Total

Press 2 Sec Reset Trip

DIGITAL TRUE/REL INDICATOR F. SAL-RI (SPEED LOG) (Pilothouse, FWD, Port, Overhead) SAL-SD1-7 (52315)
Test DIM

128

EA

47

7320-01-234-2145

DISHWASHING MACHINE, COMMERCIAL (Galley) JPX300H (1ST47)

128

EA

48

7310-01-315-8423

DISPENSER, BEVERAGE, MECHANICALLY COOLED (Mess/Recreation Space) D25-4 (02066)

128

EA

0163-12

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 49 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7310-00-345-9903 (3) DESCRIPTION, PART NUMBER/(CAGEC) DISPENSER, BULK MILK, MECHANICALLY COOLED (Mess/Recreation Space) SK3IMPR401A (12881) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

50

4110-00-782-5125

DISPENSER, DRINKING WATER, MECHANICAL (Crew's Mess, 01 Level Passageway) 4110-00-782-5125 (80244)

128

EA

51

DRILL PRESS (AMS 2) OR-1758 (85002)

128

EA

52

DRYER, AUTOMATIC (Laundry Space) 110.868601 (53800)

128

EA

0163-13

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 53 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) ECHO SOUNDER DISPLAY/ OPERATOR UNIT (Pilothouse, FWD, Overhead) GDS 101 RM (52315) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

54

ELECTRICAL BOX (All Vessels Except LT 803) (POWER SYSTEM) (Radio Rack) (0JDM6)

128

EA

55
Volts
OFF

27.5
OFF OFF OFF OFF OFF

ELECTRONICS CONTROL UNIT, IBS DISTRIBUTION PANEL (Pilothouse, Port Forward, Overhead) GY01U01A007 (52315)

128

EA

OFF OFF OFF

OFF OFF

24 VOLT DISTRIBUTION

56

NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

NautoConning 1
FEEDER CB OPEN PUMP OIL LEVEL CONTROL

NautoAlarm Conning
CONTROL VOLTAGES PHASE FAILURE CONTROL

1
POWER FAILURE

1
CONTROL

1
OVERLOAD

2 Set
CONTROL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

Esc

Menu

Test

STEERING FILTER DIRTY

FU CONTROL

STEERING FILTER DIRTY

FU CONTROL

Test Signal Unit TEST


STEERING FAILURE

Repeater

NautoPilot NP2030
Heading Control Heading

9
8

0
1
ParaMeter

Gyro Magnet

119.4 119

Control Preset

GyroCompass

Set Course

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Test

Steering Mode

10
Change-Over-Switch
PUMP 1 ON PUMP 2 ON

0 10
Auto Pilot

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

Test

Track Control

R.o.T. Tiller

Radius R.o.T.

External

Set

Stbd

ELECTRONICS UNIT, AUTOPILOT NAUTOCONNING (PART OF STEERING STAND) (Pilothouse, FWD, Center, Compilot 20 Steering Stand) PC03-S010035 (52315)

128

EA

4 5

0163-14

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 57 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2805-01-505-1613 (3) DESCRIPTION, PART NUMBER/(CAGEC) ENGINE, GASOLINE (Boat, Rigid, Inflatable) MODEL 70(1UVT5) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

58

FAX (All Vessels Except LT 803) (DATA EQUIPMENT) (Radio Rack) SFX2000M (29068)

128

EA

59

FEEDBACK UNIT (Steering Gear Locker) 101-528 NG024E00 (52315)

128

EA

60

FEEDBACK UNIT (Steering Gear Locker) 101-528 NG027 EO2 (52315)

128

EA

0163-15

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 61 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) FLANGE, IMCO, SHIP (Vestibule) PTCPF25C (K0427) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

62

FREEZER (Galley) FV20 (16599)

128

EA

63

7310-01-421-8887

FRYER, DEEP FAT (Galley) F-28M NSU (34931)

128

EA

64

FUEL OIL FILTER/WATER SEPARATOR (Engine Room, Starboard, AFT) 800D-20 (55752)

128

EA

0163-16

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 65 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4540-01-418-4142 (3) DESCRIPTION, PART NUMBER/(CAGEC) GARBAGE DISPOSAL MACHINE, COMMERCIAL (Galley Sink) FD2-75 (28873) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

66

6115-01-356-9868

GENERATOR SET, DIESEL ENGINE (Engine Room, Port & STBD, FWD of Propulsion Engines) 4W9129 (11083)

128

EA

67

7310-01-104-0920

GRIDDLE, SELF HEATING (Galley) LG-36M-1 (34931)

128

EA

68

5130-01-455-5721

GRINDER BENCH (Workshop AMS 2) DW 758 (07429)

128

EA

0163-17

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 69 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) GYRO COMPASS STD-20 (LT 803 Only) (Pilothouse, AFT of Radio Room Stairs) 110-222 SA003 (52315) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

70

GYRO COMPASS STD-22 (All Vessels Except LT 803) (Pilothouse, AFT of Radio Room Stairs) 110-222 SA003 (52315)

128

EA

71

GYROCOMPASS, PAYTHEON, STD-20 CONTROL UNIT (LT 803 Only) (Pilothouse, AFT of Radio Room Stairs) 111-006.EO1 (52315)

128

EA

72

GYROCOMPASS, RAYTHEON, STD-20 CONTROL UNIT (All Vessels Except LT 803) (Pilothouse, AFT of Radio Room Stairs) 111-006.EO1 (52315)

128

EA

0163-18

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 73 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) H250 HANDSET (LT 803 Only) (VIC-3 REMOTE STATIONS) (Radio Equipment Rack #2) 10075-1399-01 (14304) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

74

HAND-SET (All Vessels Except LT 803) (UHF/VHF RADIO SYSTEMS) (Radio Station Desk) HS2001

128

EA

75

HAND-SET H250U (All Vessels Except LT 803) (VIC-3 REMOTE STATIONS) (Radio Station Desk) 10075-1399-01 (14304)

128

EA

76

HANDSET, CRADLE, INMARSAT (LANDSEA) (Radio Room) TT-3622B (00853)


1 4 7 2 5 8 0 3 6 9
#

128

EA

0163-19

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 77 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) HANDSET, INMARSAT (LANDSEA) (Radio Room) TT-3620F (00853)
1 4 7 2 5 8 0 3 6 9
#

0163

(4) USABLE ON CODE 128

(5)

(6) QTY RQR 1

U/I EA

78

NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

NautoConning 1
FEEDER CB OPEN PUMP OIL LEVEL CONTROL

NautoAlarm Conning
CONTROL VOLTAGES PHASE FAILURE CONTROL

1
POWER FAILURE

1
CONTROL

1
OVERLOAD

2 Set
CONTROL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

Esc

Menu

1
STEERING FILTER DIRTY

Test

FU CONTROL

STEERING FILTER DIRTY

FU CONTROL

Test Signal Unit TEST


STEERING FAILURE

Repeater

NautoPilot NP2030
Heading Control Heading

Gyro Magnet

119.4 119
Set Course

ParaMeter

Control Preset

GyroCompass

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Test

Steering Mode

0 10 10
Auto Pilot

Change-Over-Switch
PUMP 1 ON PUMP 2 ON

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

Test

Track Control

R.o.T. Tiller

Radius R.o.T.

External

HELM, FOLLOWUP (Pilothouse, FWD, Center, Compilot 20 Steering Stand) (52315)

128

EA

2
3

79

80

4 5

Set

Stbd

ICE MAKER (Mess/Recreation Area) GS6A (61633)

128

EA

INMARSAT C TERMINAL, (SAILOR-2095C/GPS) (COMPONENT OF GMDSS SUITE) (Pilothouse, Aft, Starboard) 91482200 (0U8J3)

128

EA

0163-20

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 81 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5895-01-382-3220 (3) DESCRIPTION, PART NUMBER/(CAGEC) INTERFACE UNIT, COMMUNICATIONS EQUIPMENT RIT (LT 803 Only) (Radio Equipment Rack #3) A3205749 (80063) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

82
"SAILOR"
DT4646E DATA TERMINAL

SCAN "SAILOR" RT4822 VHF DSC RX LOG TX CALL ADDR BOOK TEL/ DSC DIM 7 P 1 SELCALL T/R 4

SCAN ADD 2 SCAN TIME 5 U.S. 8 SHIFT

SCAN DELETE 3 D.W. 6 1W 9

16

ON/ OFF

"SAILOR"
TX CALL ALARM

HC4500 MF/HF CONTROL UNIT

RX LOG TX CALL ADDR BOOK TEL/ DSC

"SAILOR"

DT4646E DATA TERMINAL

> Rx 4375.0 kHz Tx 4065.0 kHz

1 6

2 7

3 8

2182 DIST FREQ

DISTRESS

9 . 0 .

SHIFT

ON/ OFF

BATTERY 1
EMERGENCY LIGHT

BATT 12

DIM

BATTERY 2
1 BATTERY ALARM 2 1 AC ALARM 2 TEST

KEYBOARD, (SAILORKB4641E) (COMPONENT OF GMDSS SUITE) (Pilothouse, Aft, Starboard) 85464110 (0U8J3)

128

EA

83

KEYBOARD, RACK MOUNTED, 1-U (LT 803 Only) (Radio Equipment Racks #2 and #3) 105-000-1U-2 (0JDM6)

128

EA

84

KEYBOARD/TRACKBALL KEYTRONICS (All Vessels Except LT 803) (DATA EQUIPMENT) (Radio Station Desk) 406941 (1JVB1)

128

EA

0163-21

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 85 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) LEICA HEAD MX 420 (GPS UNITS) (Pilothouse, Above Chart Table) 9525 200 78000 (02F05) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

86

LEVER DRIVE (Steering Gear Locker) 148-442 (52315)

128

EA

87

4220-01-444-6260

LIFE RAFT, INFLATABLE MK7 (Fitted) 00013592 (074V1)

128

EA

88

LOCKER, STOWAGE, SCBA (Main Deck Vestibule and Damage Control Locker) MDL-E3 (31644)

128

EA

0163-22

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 89 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5965-01-408-5990 (3) DESCRIPTION, PART NUMBER/(CAGEC) LOUDSPEAKER, PSTH-104 (LT 803 Only) (VIC-3 REMOTE STATIONS) (Radio Equipment Rack #2) 50-P36033M002 (IVPWB) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

90

7320-01-342-0696

MEAT SLICING MACHINE, ELECTRIC (Galley) 2612 115V (28873)

128

EA

91

7310-01-358-7026

MICROWAVE OVEN (Galley/ Mess) R-22GTF (0BDN7)

128

EA

92

7320-00-894-6095

MIXING MACHINE, FOOD, ELECTRIC (Galley) HL200 (28873)

128

EA

CONTROL PANEL

0163-23

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 93 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) MK2 25KW S-BAND PEDESTAL (TRANSMITTER) (Top of Pilothouse) 1054/M28349 (52315) MK2 30KW X-BAND PEDESTAL (TRANSMITTER) (Top of Pilothouse) 1107/M28347 (52315) MK2 ARPA W/DECK STAND (S-BAND CONSOLE) (Pilothouse, STBD Side) 900 040.NG001 E01 (52315) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

94

128

EA

95

128

EA

96

MK2 ARPA W/DECK STAND (X-BAND CONSOLE) (Pilothouse, Port Side) 900 040.NG001 E01 (52315)

128

EA

97

MONITOR, FIRE (Top of Pilothouse) 1M/HR-376(0BJH3) MONITOR, SONY STYLEPRO SDM S53/B-FLAT PANEL (All Vessels Except LT 803) (DATA EQUIPMENT) (Radio Station Desk) 517573 (1JVB1)

128

EA

98

128

EA

0163-24

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 99 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) NAUTOCONNING DISPLAY, 15 INCH TFT (Pilothouse, FWD, STBD Side) 16072 (L1162) (52315) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

100

NautoPilot NP2030
Heading Control Heading

Gyro Magnet

119.4 119

Track Control

ParaMeter

R.o.T. Tiller

Control Preset

Radius R.o.T. Set Course

Limits Values

External

Display

Set

Magnet

NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

NautoConning 1
FEEDER CB OPEN PUMP OIL LEVEL CONTROL

NautoAlarm Conning
CONTROL VOLTAGES PHASE FAILURE CONTROL

Test
2 2
OVERLOAD

1
POWER FAILURE

1
CONTROL

1
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

Esc

Menu

1
STEERING FILTER DIRTY

Set

CONTROL

2
STEERING FILTER DIRTY

Test

Test Signal Unit TEST


STEERING FAILURE

Repeater

NautoPilot NP2030
Heading Control Heading

9
8

Gyro Magnet

119.4 119

ParaMeter

Control Preset

Set Course

GyroCompass

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Test

Steering Mode

0 10 10
Auto Pilot

Change-Over-Switch
PUMP 1 ON PUMP 2 ON

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

Test

FU CONTROL

FU CONTROL

NAUTOPILOT (Pilothouse, FWD, Center, Compilot 20 Steering Stand) (52315)

128

EA

Track Control

R.o.T. Tiller

2
3

Radius R.o.T.

External

101

GyroCompass
NautoAlarm NautoConning NautoAlarm Conning
Esc Menu
CONTROL VOLTAGES PHASE FAILURE CONTROL

Set 1
1

CONTROL VOLTAGES

PHASE FAILURE

1
OVERLOAD

CONTROL

Test

Gyro

TMC

Gyro Coff.

TMC Coff.

Test
Signal Unit TEST
STEERING FAILURE

Test NautoPilot NP2030


Heading Control Heading

Repeater

Gyro Magnet

119.4 119

ParaMeter

Control Preset

Set Course

GyroCompass

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Test

Steering Mode

10
Change-Over-Switch
PUMP 1 ON PUMP 2 ON

0 10
Auto Pilot

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

Test

STEERING FILTER DIRTY

102
NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

NautoConning 1
FEEDER CB OPEN PUMP OIL LEVEL CONTROL

NautoAlarm Conning
CONTROL VOLTAGES PHASE FAILURE CONTROL

1
POWER FAILURE

1
CONTROL

1
OVERLOAD

Esc

Menu

1
STEERING FILTER DIRTY

1
FU CONTROL

Set

Test

Test Signal Unit TEST


STEERING FAILURE

Repeater

NautoPilot NP2030
Heading Control Heading

9
8

Gyro Magnet

119.4 119

ParaMeter

Control Preset

Set Course

GyroCompass

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Test

Steering Mode

10
Change-Over-Switch
PUMP 1 ON PUMP 2 ON

0 10
Auto Pilot

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

Test

103

4 5

4 5

4 5
CONTROL

Set

Stbd

1
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

1
POWER FAILURE

2 Set
CONTROL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

1
FU CONTROL

2
STEERING FILTER DIRTY

2
FU CONTROL

Track Control

R.o.T. Tiller

Radius R.o.T.

External

Set

OPERATOR UNIT COMPASS SYSTEM (Pilothouse, FWD, Center, Compilot 20 Steering Stand) 130-601NG010 (52315)
Stbd

128

EA

2
3
2
CONTROL

Override Switch

AUTO

MANUAL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

2
STEERING FILTER DIRTY

2
FU CONTROL

Track Control

OVERRIDE SWITCH (Pilothouse, FWD, Center, Compilot 20 Steering Stand) (52315)

128

EA

R.o.T. Tiller

2
3

Radius R.o.T.

External

Set

Stbd

PLATE, FLOUNDER (Towing Gear Locker) 13226E2131 (97403)

128

EA

0163-25

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 104 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) POWER AMPLIFIER AM-7175D (LT 803 Only) (POWER AMP & PRE-AMP SUB-SYSTEM) (Radio Equipment Rack #1) 01-P09986V004 (IVPW8) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

105

POWER AMPLIFIER, RF-5834H (LT 803 Only) (POWER AMPLIFIER SUBSYSTEM) (Radio Equipment Rack #2) RF5834H-PA-400 (14304)

128

EA

106

POWER AMPLIFIER, TC100D (All Vessels Except LT 803) (POWER AMP & PRE-AMP SUB-SYSTEM) (Radio Station Desk) 15300 (0HGXB)

128

EA

107

POWER SUPPLY, 115-24V (Pilothouse, GMDSS Equipment) 115-24-35CD (62028) POWER SUPPLY, 300 AMP (Fan Room) 23-200100 (58424)

128

EA

108

128

EA

0163-26

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 109 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) POWER SUPPLY, 24/12VDC, (SAILOR-N420) (COMPONENT OF GMDSS SUITE) (Pilothouse, Aft, Starboard) 80042010 (0U8J3) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

110

POWER SUPPLY, RF-5054PS-400 (LT 803 Only) (POWER SUPPLY SUB-SYSTEM) (Radio Equipment Rack #2) 10299-5054-03 (14304)

128

EA

SET

111
"SAILOR"
DT4646E DATA TERMINAL

SCAN "SAILOR" RT4822 VHF DSC RX LOG TX CALL ADDR BOOK TEL/ DSC DIM 7 P 1 SELCALL T/R 4

SCAN ADD 2 SCAN TIME 5 U.S. 8 SHIFT

SCAN DELETE 3 D.W. 6 1W 9

16

ON/ OFF

"SAILOR"
TX CALL ALARM

HC4500 MF/HF CONTROL UNIT

RX LOG TX CALL ADDR BOOK TEL/ DSC

"SAILOR"

DT4646E DATA TERMINAL

> Rx 4375.0 kHz Tx 4065.0 kHz

1 6

2 7

3 8

2182 DIST FREQ

DISTRESS

9 . 0 .

SHIFT

ON/ OFF

BATTERY 1
EMERGENCY LIGHT

BATT 12

DIM

BATTERY 2
1 BATTERY ALARM 2 1 AC ALARM 2 TEST

PRINTER, 24V DC (SAILORH1252B) (COMPONENT OF GMDSS SUITE) (Pilothouse, Aft, Starboard) 8012520006 (0U8J3)

128

EA

112

PRINTER, COLOR HP DESKSET (Pilothouse, Near Chart Table) P/N 5550 (0JDM6)

128

EA

113

PRINTER/FAX/SCANNER (HP) (LT 803 Only) (DATA EQUIPMENT) (Radio Equipment Rack #3) HP720 (1RCQ5)

128

EA

0163-27

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 114 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5830-01-412-2012 (3) DESCRIPTION, PART NUMBER/(CAGEC) PUBLIC ADDRESS SET (Pilothouse, FWD, Overhead) AN/PIQ-5B (32677) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

115

R1 SPEED LOG ELECTRONICS UNIT SAL R1 (Pilothouse, FWD, Port Console) 701800D (52315)

128

EA

116

R1P PULSE BOARD F. SAL R1 LOG (Pilothouse, FWD, Port Console) 701837C1 (52315)

128

EA

117

SCAN SAILOR RT4822 VHF DSC

RX LOG TX CALL TX CALL TEL/ DSC


DIM

1
SELCALL T/R

SCAN ADD

2 5

SCAN DELETE

4 7

SCAN TIME

D.W.

6
1W

U.S.

8
SHIFT

9 16

0
ON/OFF

DISTRESS

RADIO, VHF (SAILORRT4822) C/W HANDSET (All Vessels Except LT 803) (Overhead Starboard, Forward Console) 82209510 (0U8J3) RADIO SET, VHF (LT 803 Only) (Pilothouse, Port Aft, Overhead, Above Chart Table (1), and FWD Overhead, Starboard (1)) DSC 500 (0WF67)

128

EA

118

5825-01-471-0269

128

EA

DSC 500
WX 16 D/W H/L 1 ABC DEF 2 JKL 5 TUV 8 QZ 0 3 MNO 6 WXY 9 U/I DIM
OFF

VOL

SQ

MAX

GHI 4 SCAN PRS 7 EMER SCRM DSC ENT TEL ANS CLR HAIL FNC ICM SET

MIN

MIC

MAX

DIGITAL SELECTIVE CALLING

SECURE MARINE VHF

0163-28

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 119 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5825-01-471-0269 (3) DESCRIPTION, PART NUMBER/(CAGEC) RADIO SET, VHF (All Vessels Except LT 803) (Pilothouse, Port Aft, Overhead, Above Chart Table) DSC 500 (0WF67) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

DSC 500
WX 16 D/W H/L 1 ABC DEF 2 JKL 5 TUV 8 QZ 0 3 MNO 6 WXY 9 U/I DIM
OFF

VOL

SQ

MAX

GHI 4 SCAN PRS 7 EMER SCRM DSC ENT TEL ANS CLR HAIL FNC ICM SET

MIN

MIC

MAX

DIGITAL SELECTIVE CALLING

SECURE MARINE VHF

120

7310-01-282-0032

RANGE, ELECTRIC (Galley) RF-21SM-G (440V)(34931)

128

EA

121

REFRIGERATION MACHINE (AMS#2) 90DF400014 (10855)

128

EA

122

REFRIGERATOR (Galley) CV20 (16599)

128

EA

123

REFRIGERATOR, 2.1 CUFT CAP (Staterooms) SSD2CK (2B427)

128

EA

0163-29

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 124 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) REPEATER COMPASS (Aft Steering) 133-556NG003 (52315) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

125

REPEATER COMPASS, DIGITAL (Pilothouse, FWD, Port, Overhead) 133-811NG010 (52315) RF TRANSCEIVER (LAND SEA) (SATCOM SYSTEM) (Radio Equipment Rack #3) (LT 803 Only) (Behind Radio Station Desk) (All Vessels Except LT 803) OPT952 (00853) RUDDER ANGLE INDICATOR (AFT Steering) 136-045 (52315)

128

EA

126

128

EA

127

128

EA

128

RUDDER ANGLE INDICATOR (Bridge Wings) 136-053 (52315)

128

EA

129

RUDDER ANGLE INDICATOR (Pilothouse, FWD, Port) 136-062NG001 (52315)

128

EA

0163-30

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 130 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) SENSOR, RELATIVE HUMIDITY/TEMPERATURE (Starboard Mast) 41372 VC F.M. Young Company (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

131

SIGNAL BOOSTER (Pilothouse) NB 03-896 (52315)

128

EA

132

STARBOARD STDE CONSOLE (Pilothouse, FWD Center) 106-085.NG002 (52315)

128

EA

133

Signal Unit TEST


STEERING FAILURE

NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

NautoConning 1
FEEDER CB OPEN PUMP OIL LEVEL CONTROL

NautoAlarm Conning
CONTROL VOLTAGES PHASE FAILURE CONTROL

1
POWER FAILURE

1
CONTROL

1
OVERLOAD

2 Set
CONTROL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

Esc

Menu

1
STEERING FILTER DIRTY

Test

FU CONTROL

STEERING FILTER DIRTY

FU CONTROL

Test Signal Unit TEST


STEERING FAILURE

Repeater

NautoPilot NP2030
Heading Control Heading

9
8

0
1
ParaMeter

Gyro Magnet

119.4 119
Set Course

Control Preset

GyroCompass

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Test

Steering Mode

10
Change-Over-Switch
PUMP 1 ON PUMP 2 ON

0 10
Auto Pilot

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

Test

Track Control

R.o.T. Tiller

Radius R.o.T.

External

Set

STEERING FAILURE ALARM (Pilothouse, FWD, Center, Compilot 20 Steering Stand) 135-081SA200 (52315)
Stbd

128

EA

2
3

134

Steering Mode

NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

NautoConning 1
FEEDER CB OPEN PUMP OIL LEVEL CONTROL

NautoAlarm Conning
CONTROL VOLTAGES PHASE FAILURE CONTROL

1
POWER FAILURE

1
CONTROL

1
OVERLOAD

2 Set
CONTROL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

Esc

Menu

1
STEERING FILTER DIRTY

Test

FU CONTROL

STEERING FILTER DIRTY

FU CONTROL

Test

Test Signal Unit TEST


STEERING FAILURE

Repeater

NautoPilot NP2030
Heading Control Heading

9
8

0
1
ParaMeter

Gyro Magnet

119.4 119
Set Course

Control Preset

GyroCompass

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Steering Mode

10
Change-Over-Switch
PUMP 1 ON PUMP 2 ON

0 10
Auto Pilot

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

135

PUMP 1 ON

PUMP 2 ON
NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

NautoConning 1
FEEDER CB OPEN PUMP OIL LEVEL CONTROL

1
POWER FAILURE

1
CONTROL

1
OVERLOAD

Conning
Esc Menu

1
STEERING FILTER DIRTY

Test

FU CONTROL

STEERING FILTER DIRTY

FU CONTROL

Test

PUMP 1 OFF

PUMP 2 OFF

Signal Unit TEST


STEERING FAILURE

Repeater

NautoPilot NP2030
Heading Control Heading

9
8

0
1
ParaMeter

Gyro Magnet

119.4 119
Set Course

Control Preset

GyroCompass

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Test

Steering Mode

10
Change-Over-Switch
PUMP 1 ON PUMP 2 ON

0 10
Auto Pilot

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

Test

4 5
CONTROL

4 5

2
POWER FAILURE

Auto Pilot

Track Control

R.o.T. Tiller

Radius R.o.T.

External

Set

Test

STEERING MODE (Pilothouse, FWD, Center, Compilot 20 Steering Stand) (52315) STEERING PUMP SELECTOR PANEL (Pilothouse, FWD, Center, Compilot 20 Steering Stand) (52315)

128

EA

2
3

4 5

Stbd

NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

2 Set
CONTROL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

128

EA

Track Control

R.o.T. Tiller

2
3

Radius R.o.T.

External

Set

Stbd

0163-31

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 136 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) SWITCH UNIT, REMOVE RADIO, FLUSH MOUNTED (All Vessels Except LT 803) (VIC-3 REMOTE STATIONS) (Radio Station Desk) 98-101722 (0JDM6) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

137

Tiller NFU
In Command

Port
NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

Stbd

NautoConning 1
FEEDER CB OPEN PUMP OIL LEVEL CONTROL

NautoAlarm Conning
CONTROL VOLTAGES PHASE FAILURE CONTROL

TILLER NFU (Pilothouse, FWD, Center, Compilot 20 Steering Stand) 105-107 NG010 (52315)

128

EA

1
POWER FAILURE

1
CONTROL

1
OVERLOAD

2 Set
CONTROL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

Esc

Menu

1
STEERING FILTER DIRTY

Test

FU CONTROL

STEERING FILTER DIRTY

FU CONTROL

Test Signal Unit TEST


STEERING FAILURE

Repeater

NautoPilot NP2030
Heading Control Heading

9
8

0
1
ParaMeter

Gyro Magnet

119.4 119
Set Course

Control Preset

GyroCompass

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Test

Steering Mode

10
Change-Over-Switch
PUMP 1 ON PUMP 2 ON

0 10
Auto Pilot

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

Test
Track Control R.o.T. Tiller Radius R.o.T. External

2
3

138

139

140

4 5

Set

Stbd

TOASTER, ELECTRICAL, AUTOMATIC, 4 SLICE (Galley) 1D2(115V) W-T-550 (78770)

128

EA

TRANSCEIVER, UNIT (All Vessels Except LT 803) (HF SYSTEM) (Bulkhead Above Radio Station Desk) FS2570-T (00KH0)

128

EA

TRANSDUCER, 200 KHZ (Hull Mounted Below EOS) ETN200FX (52315)

128

EA

0163-32

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 141 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) TRANSDUCER, SALR1 SPEED LOG (Transducer Well Under EOS) 71-705050-30 (52315) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

142

TRANSDUCER, TANK FOR GDS 101 (Pilothouse) ETNST (52315)

128

EA

143

NautoAlarm
CONTROL VOLTAGES PHASE FAILURE CONTROL

NautoConning 1
FEEDER CB OPEN PUMP OIL LEVEL CONTROL

NautoAlarm Conning
CONTROL VOLTAGES PHASE FAILURE CONTROL

1
POWER FAILURE

1
CONTROL

1
OVERLOAD

2 Set
CONTROL

2
OVERLOAD

2
FEEDER CB OPEN PUMP

OIL LEVEL

CONTROL

2
POWER FAILURE

Esc

Menu

Test

STEERING FILTER DIRTY

FU CONTROL

STEERING FILTER DIRTY

FU CONTROL

Test Signal Unit TEST


STEERING FAILURE

Repeater

NautoPilot NP2030
Heading Control Heading

9
8

0
1
ParaMeter

Gyro Magnet

119.4 119

Control Preset

GyroCompass

Set Course

Limits Values

Set

Display

Gyro

TMC

Gyro Coff.

TMC Coff.

119.4
Test

Magnet

Test

Steering Mode

10
Change-Over-Switch
PUMP 1 ON PUMP 2 ON

0 10
Auto Pilot

Tiller NFU
In Command

AUTO
MAIN ECDIS Back ECDIS

PUMP 1 OFF

PUMP 2 OFF

MANUAL

Port

Test

Track Control

R.o.T. Tiller

Radius R.o.T.

External

Set

Stbd

TRANSFORMER BOX (Pilothouse, FWD, Center, Compilot 20 Steering Stand) 116-087 NG002 (52315)

128

EA

144

4 5

TRANSFORMER, ACME 15KVA 440/220 (Fan Room) T-253571-3S (5V049)

128

EA

0163-33

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 145
"SAILOR"
DT4646E DATA TERMINAL

0163

(2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION


SCAN "SAILOR" RT4822 VHF DSC RX LOG TX CALL ADDR BOOK TEL/ DSC DIM 7 P SHIFT 0 16 1 SELCALL T/R 4 U.S. 8 SCAN ADD 2 SCAN TIME 5 1W 9 SCAN DELETE 3 D.W. 6 ON/ OFF "SAILOR"
TX CALL ALARM TEL/ DSC HC4500 MF/HF CONTROL UNIT RX LOG TX CALL ADDR BOOK

(3) DESCRIPTION, PART NUMBER/(CAGEC) TRANSMITTER, 250 WATT, (SAILOR-HT4520) (COMPONENT OF GMDSS SUITE) (Pilothouse, Aft, Starboard) 90452411 (0U8J3)

(4) USABLE ON CODE 128

(5)

(6) QTY RQR 1

U/I EA

"SAILOR"

DT4646E DATA TERMINAL

> Rx 4375.0 kHz Tx 4065.0 kHz

1 6

2 7

3 8

2182 DIST FREQ

DISTRESS

9 . 0 .

SHIFT

ON/ OFF

BATTERY 1
EMERGENCY LIGHT

BATT 12

DIM

BATTERY 2
1 BATTERY ALARM 2 1 AC ALARM 2 TEST

146

5820-01-442-7004

UHF TRANSMITTER, LST-5D (LT 803 Only) (UHF SATCOM SYSTEM) (Radio Equipment Rack #1) 01-P34110J100 (IVPW8)

128

EA

147

UNINTERRUPTED POWER SUPPLY (UPS) (Entranceway to Radio Room) N014073 (52315) UNINTERRUPTED POWER SUPPLY (UPS) FE2100VA 120V (LT 803 Only) (POWER SYSTEM) (Radio Equipment Rack #3) 01-P34110J100 (IVPW8)

128

EA

148

128

EA

149

UNINTERRUPTED POWER SUPPLY (UPS), APC SMART FE850VA 120V SUB/SER RM 2U (All Vessels Except LT 803) (POWER SYSTEM) (Radio Rack) SUA1500RM2U (84261)

128

EA

0163-34

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 150 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) VENTILATOR Gaylord (38427) (4) USABLE ON CODE (5)

0163

(6) QTY RQR 1

U/I EA

151

VIDMAR CABINET, 0340 HOUSING WITH 9 DRAWERS, DRAWER ACCESSORIES AND LOCKING DEVICE (34004)

128

EA

152

VIDMAR CABINET, HOUSING-LW, 0340 (30"W X 21 3/8"D X 59"H) LW0340 (34004)

128

EA

153

VOICE DATA SWITCH UNIT (LT 803 Only) (DATA EQUIPMENT) (Radio Equipment Rack #2) 98 200977 (OJDM6)

128

EA

154

VOLTAGE INPUT MODULE (Pilothouse, Weather Station) 17023 (52315)

128

EA

0163-35

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 155 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) WASHING MACHINE, ELECTRIC, HEAVY DUTY (Laundry Space) 110 8180100 (53800) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

156

3431-01-063-3340

WELDING MACHINE, ARC (SYNCROWAVE 350 LX) (Workshop) 907198(40608)

128

EA

157

WIND TRACKER 350X, MARINE (Mast) 06206 F.M. Young Company

128

EA

158

WIND TRACKER DISPLAY (Pilothouse, Above Chart Table) 11029 (52315)


WIND TRACKER

128

EA

159

WIND TRACKER PROGRAMMABLE TRANSLATOR (Pilothouse, Above Chart Table) 5722 (52315)

128

EA

0163-36

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 160 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION (3) DESCRIPTION, PART NUMBER/(CAGEC) X-BAND RADAR (Top of Pilothouse) Raytheon M28342 (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

0163-37

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 161 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4730-01-528-6811 (3) DESCRIPTION, PART NUMBER/(CAGEC) ADAPTER, STRAIGHT, HOSE TO BOSS (Vestibule Vidmar Cabinets) W37876-022 (75906) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 4

U/I EA

ON-BOARD SPARES LIST

162

4730-01-322-9129

ADAPTER, STRAIGHT, PIPE TO BOSS (Vestibule Vidmar Cabinets) P6MC4 (93061)

128

EA

163

4730-01-130-5439

ADAPTER, STRAIGHT, PIPE TO HOSE (Vestibule Vidmar Cabinets) 61149 (27901)

128

EA

0163-38

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 164 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4730-01-527-5883 (3) DESCRIPTION, PART NUMBER/(CAGEC) ADAPTER, STRAIGHT, PIPE TO TUBE (Vidmar Vestibule Cabinets) P6MC8 (61424) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

165

5331-01-528-6709

ADAPTER, STRAIGHT, PIPE TO TUBE (Vidmar Vestibule Cabinets) 0117410800(1B202)

128

EA

166

4310-01-529-2393

AIR CLEANER, INTAKE (Vestibule Vidmar Cabinets) 53KN2C30100 (10855)

128

EA

167

4310-01-528-6651

AIR CLEANER, INTAKE (Vestibule Vidmar Cabinets) 07620301WA-05 (1BZ02)

128

EA

0163-39

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 168 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6350-01-528-6983 (3) DESCRIPTION, PART NUMBER/(CAGEC) ALARM, AUDIBLE-VISUAL (Bosun's Locker) 867STRA-AQ (7X933) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

169

5342-01-342-0466

ANODE, CORROSION PREVENTIVE (Bosun's Locker) A10356 (70774)

128

EA

170

3110-01-144-1557

BEARING, BALL, ANNULAR (Bow Thruster Port S2) 903405 (07524)

128

EA

171

3110-01-313-5560

BEARING, BALL, ANNULAR 0011-3203-470 (80871)

128

EA

0163-40

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 172 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 3110-00-555-5362 (3) DESCRIPTION, PART NUMBER/(CAGEC) BEARING, BALL, ANNULAR (Machine Shop D9) 3303ATN9 (52676) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

173

3110-01-313-5559

BEARING, BALL, ANNULAR 0011-6205-110 (80871)

128

EA

174

3110-01-313-5561

BEARING, BALL, ANNULAR 0011-6202-000 (80871)

128

EA

175

3110-01-339-9525

BEARING, BALL, ANNULAR (Machine Shop D9) 068-1905-647 (04579)

128

EA

0163-41

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 176 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 3120-00-795-4915 (3) DESCRIPTION, PART NUMBER/(CAGEC) BEARING, HALF SLEEVE (Bow Thruster Port S2) GB-8237900 (5F475) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

177

3120-00-363-5831

BEARING HALF, SLEEVE (Bow Thruster Port S2) GB-8071176 (5F475)

128

EA

24

178

3120-00-477-9914

BEARING HALF, SLEEVE (Bow Thruster S2) 8261195 (72915)

128

EA

0163-42

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 179 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 3120-00-795-4916 (3) DESCRIPTION, PART NUMBER/(CAGEC) BEARING HALF, SLEEVE (Bow Thruster S3) GB-8253825 (5F475) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

180

3120-00-168-6358

BEARING, IDLER GEAR (Vestibule Vidmar Cabinets V2) 8418334 (72915)

128

EA

181

6350-01-188-0285

BELL, ELECTRICAL (Bosun's Locker) UATV-9-115VAC (73274)

128

EA

182

3030-01-339-8132

BELT, V (Bow Thruster Port S1) 9310380 (72915)

128

EA

0163-43

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 183 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 3030-00-529-0346 (3) DESCRIPTION, PART NUMBER/(CAGEC) BELT, V (Bosun's Locker) A33 (10855) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

184

3030-01-310-4414

BELT, V (Bosun's Locker) 110258B082(49576)

128

EA

185

5340-01-528-8955

BRACKET, MOUNTING (Vestibule Vidmar Cabinets) 38GB5A1105AOZ (10855)

128

EA

186

4310-01-151-3917

BREATHER (Bosun's Locker) ABF-3/10 (08832)

128

EA

0163-44

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 187 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5342-01-469-8519 (3) DESCRIPTION, PART NUMBER/(CAGEC) CAP, FILLER OPENING (Vestibule Vidmar Cabinets) 12180510CO-10 (1BZ02) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

188

5910-01-395-0109

CAPACITOR, FIXED, ELECTROLYTIC (Vestibule Vidmar Cabinets) P291-1503 (10855)

128

EA

189

5910-01-528-8900

CAPACITOR, FIXED, ELECTROLYTIC (Vestibule Vidmar Cabinets) P291-2503R (10855)

128

EA

0163-45

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 190 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5910-01-528-8915 (3) DESCRIPTION, PART NUMBER/(CAGEC) CAPACITOR, FIXED, ELECTROLYTIC (Vestibule Vidmar Cabinets) PCA01VX024A (10855) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

191

4620-01-468-6275

CELL SALINITY DETECTOR (Vestibule Vidmar Cabinets) B511080001 (1BZ02)

128

EA

192

5925-01-477-6200

CIRCUIT BREAKER (Vestibule Vidmar Cabinets) HH83ZB001 (10855)

128

EA

0163-46

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 193 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5998-01-528-8761 (3) DESCRIPTION, PART NUMBER/(CAGEC) CIRCUIT CARD ASSEMBLY (Vestibule Vidmar Cabinets) CESO110063-02 (10855) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

194

4730-01-528-5811

CLAMP, HOSE Z0257 (05MH3)

128

EA

195

4730-01-533-9204

CLAMP, HOSE SS HF12SS (1FFH9)

128

EA

196

5340-01-528-6183

CLAMP, LOOP RK 18609 (06TW0)

128

EA

0163-47

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 197 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4820-01-132-6317 (3) DESCRIPTION, PART NUMBER/(CAGEC) COCK, DRAIN (Bow Thruster STBD S2) 8924140 (3B518) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

198

2030-01-250-7608

CONTROL HEAD F021-10111 (0SM11)

128

EA

199

4730-01-528-5084

COUPLING, HOSE (Vestibule Vidmar Cabinets) AH40250-6-6 (05MH3)

128

EA

200

2815-01-343-5832

CYLINDER HEAD, DIESEL ENGINE 9579069 (72915)

128

EA

0163-48

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 201 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6685-01-528-6740 (3) DESCRIPTION, PART NUMBER/(CAGEC) DAMPENER, FLUID PRESSURE (Bosun's Locker) NS P1B 30J (05MH3) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

202

4730-01-322-9131

ELBOW, PIPE TO BOSS (Vestibule Vidmar Cabinets) P6ME4 (93061)

128

EA

203

4730-01-122-8918

ELBOW, PIPE TO HOSE (Vestibule Vidmar Cabinets) 538429 (19139)

128

EA

0163-49

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 204 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4730-00-251-6369 (3) DESCRIPTION, PART NUMBER/(CAGEC) ELBOW, PIPE TO HOSE (Vestibule Vidmar Cabinets) TLS66 (72661) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 4

U/I EA

205

4730-01-528-5091

ELBOW, PIPE TO HOSE (Vestibule Vidmar Cabinets) 1317011769 (1BZ02)

128

EA

206

5330-00-366-3510

FELT, MECHANICAL PREFORMED (Bow Thruster Port S1) 8055158 (72915)

128

EA

207

4730-01-528-8640

FERRULE, COMPRESSION, TUBE FITTING (Vestibule Vidmar Cabinets) S40192-208 (75906)

128

EA

10

0163-50

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 208 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4130-00-996-7903 (3) DESCRIPTION, PART NUMBER/(CAGEC) FILTER, DRYER, REFRIGERANT C-032-5 (78462) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

209

4130-01-138-3022

FILTER ELEMENT, AIR CONDITIONING DP1-40 (29296)

128

EA

210

2940-00-125-9544

FILTER ELEMENT, FLUID (Bow Thruster STBD S2) 1R0716 (11083)

128

EA

211

2910-01-051-2341

FILTER ELEMENT, FLUID (Vestibule Vidmar Cabinets) IPD4N5823 (55883)

128

EA

0163-51

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 212 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2910-01-346-6362 (3) DESCRIPTION, PART NUMBER/(CAGEC) FILTER ELEMENT, FLUID (AMS 1 CAB 2) 1R1740 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

213

4130-00-136-9191

FILTER ELEMENT, FLUID (AMS 1 CAB 2) RCW-48 (78462)

128

EA

214

4330-01-504-9506

FILTER ELEMENT, FLUID (AMS 1 CAB 2) KZ10 (08832)

128

EA

215

2940-01-342-8735

FILTER ELEMENT, FLUID (AMS 1 CAB 2) 925042 (05779)

128

EA

0163-52

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 216 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4330-01-026-2936 (3) DESCRIPTION, PART NUMBER/(CAGEC) FILTER ELEMENT, FLUID (AMS 1 CAB 2) BB10 (08832) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

217

2910-00-989-3388

FILTER ELEMENT, FLUID (AMS 1 CAB 2) 9M2341 (11083)

128

EA

218

4330-01-252-2687

FILTER ELEMENT, FLUID (Bow Thruster Compartment) 110377E100 (49576)

128

EA

0163-53

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 219 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4330-01-203-1250 (3) DESCRIPTION, PART NUMBER/(CAGEC) FILTER ELEMENT, FLUID (AMS 1 CAB 2) 4N5834 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

220

4330-01-281-5269

FILTER ELEMENT, FLUID (AMS 1 CAB 2) 110814-001 (49576)

128

PG

221

2940-00-922-2050

FILTER ELEMENT, FLUID (AMS 1 CAB 2) 8322064 (72915)

128

EA

0163-54

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 222 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2940-00-922-2053 (3) DESCRIPTION, PART NUMBER/(CAGEC) FILTER ELEMENT, FLUID (AMS 1 CAB 2) 8340000 (72915) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

223

4330-00-008-7371

FILTER ELEMENT, FLUID (AMS 1 CAB 2) 8423132 (72915)

128

EA

24

224

4330-01-503-3219

FILTER ELEMENT, FLUID (AMS 2) 33-0315 (62144)

128

EA

0163-55

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 225 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2910-01-344-5791 (3) DESCRIPTION, PART NUMBER/(CAGEC) FILTER ELEMENT, FLUID (Below EOS) 2020PM-DR (55752) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 20

U/I EA

226

2910-01-252-2687

FILTER ELEMENT, FLUID (Bow Thruster Port S2) 9097047 (72915)

128

EA

227

4330-01-339-0490

FILTER ELEMENT, FLUID (Bow Thruster Port S2) 9080820 (72915)

128

EA

0163-56

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 228 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4330-01-339-0489 (3) DESCRIPTION, PART NUMBER/(CAGEC) FILTER ELEMENT, FLUID (Bow Thruster STBD S2) 8448162 (72915) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 4

U/I EA

229

2940-01-254-1546

FILTER ELEMENT, FLUID (Bow Thruster STBD S2) 4N1981 (11083)

128

EA

230

2940-00-029-0388

FILTER ELEMENT, FLUID (Bow Thruster STBD S2) IPD2P4004 (55883)

128

EA

10

0163-57

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 231 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2940-00-125-9544 (3) DESCRIPTION, PART NUMBER/(CAGEC) FILTER ELEMENT, FLUID (Bow Thruster STBD S2) PER69 (64829) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

232

2940-00-083-8741

FILTER ELEMENT, FLUID (Bow Thruster Compartment) CA 4728 (73370)

128

EA

52

233

4330-01-477-7985

FILTER ELEMENT, FLUID (Bow Thruster Compartment) CP-20452-J (31381)

128

EA

0163-58

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 234 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4330-01-567-5799 (3) DESCRIPTION, PART NUMBER/(CAGEC) FILTER ELEMENT, FLUID (Vestibule Vidmar Cabinets) 0801063057 (IBZ02) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 12

U/I EA

235

4330-01-528-6657

FILTER ELEMENT, FLUID (Vestibule Vidmar Cabinets) 0801143157 (IBZ02)

128

EA

12

236

2940-00-976-9010

FILTER ELEMENT, INTAKE AIR CLEANER (Bow Thruster STBD S2) 4L9851 (11083)

128

EA

237

2940-01-107-9531

FILTER ELEMENT, INTAKE AIR CLEANER (Bow Thruster STBD S2) PA2571 (73370)

128

EA

0163-59

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 238 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2940-01-399-5669 (3) DESCRIPTION, PART NUMBER/(CAGEC) FILTER ELEMENT, INTAKE AIR CLEANER (Bow Thruster Compartment) 59-934232-1 (01767) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 18

U/I EA

239

4610-01-468-6266

FILTER ELEMENT, REVERSE OSMOSIS (Bow Thruster Compartment) 2724011233 (IBZ02) FILTER MEDIA, AIR CONDITIONING (Vestibule Vidmar Cabinets) 2191K54 (39428)

128

EA

240

4130-01-528-9987

128

PG

241

2940-00-033-2792

FILTER, FLUID (Bow Thruster Port S1) 8366743 (72915)

128

EA

0163-60

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 242 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4240-01-478-4720 (3) DESCRIPTION, PART NUMBER/(CAGEC) FILTER, PARTICULATE (DC Main Deck S13) 801582 (55799) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 4

U/I EA

243

5920-01-381-8290

FUSE, CARTRIDGE (Vestibule Vidmar Cabinets D1) MSL-6/10 (71400)

128

EA

244

5920-01-343-0293

FUSE, CARTRIDGE (Vestibule Vidmar Cabinets D1) KLDR 6/10 (75915)

128

EA

245

5920-00-280-5038

FUSE, CARTRIDGE (DC Main Deck DF) F03D250V1/2AS (81349)

128

EA

0163-61

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 246 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5920-01-491-1509 (3) DESCRIPTION, PART NUMBER/(CAGEC) FUSE, CARTRIDGE (Vestibule Vidmar Cabinets) AME-10220 (0SPX0) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

247

5920-00-280-3537

FUSE, CARTRIDGE (Vestibule Vidmar Cabinets) F03A250V1AS (81349)

128

EA

248

5920-00-686-9515

FUSE, CARTRIDGE (Vestibule Vidmar Cabinets) F09B250V2A (81349)

128

EA

249

5920-01-342-8844

FUSE, CARTRIDGE (Vestibule Vidmar Cabinets) E333-3903-N (81782)

128

EA

250

5920-01-334-7385

FUSE, CARTRIDGE (Vestibule Vidmar Cabinets D1) FNQ-R1/2 (71400)

128

EA

0163-62

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 251 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5920-00-577-4716 (3) DESCRIPTION, PART NUMBER/(CAGEC) FUSE, CARTRIDGE (Vestibule Vidmar Cabinets D1) FNQ1 (71400) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

252

5920-01-343-0294

FUSE, CARTRIDGE (Vestibule Vidmar Cabinets D1) FNQ-R-5 (71400)

128

EA

16

253

5920-01-103-4526

FUSE, CARTRIDGE (Vestibule Vidmar Cabinets D1) KTK-R-15 (71400)

128

EA

254

5920-01-256-5830

FUSE, CARTRIDGE (Vestibule Vidmar Cabinets D1) FNQ1-1/2 (71400)

128

EA

0163-63

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 255 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5920-00-688-4085 (3) DESCRIPTION, PART NUMBER/(CAGEC) FUSE, CARTRIDGE F09B250V10A (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

256

5920-00-557-2647

FUSE, CARTRIDGE F02A250V4A (81349)

128

EA

257

5920-01-149-9738

FUSE, CARTRIDGE (Vestibule Vidmar Cabinets D1) P8-C2-B50 (92731)

128

EA

258

5920-01-529-6525

FUSE, CARTRIDGE 1T1B2 (11007)

128

EA

0163-64

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 259 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5920-01-240-0213 (3) DESCRIPTION, PART NUMBER/(CAGEC) FUSE HOLDER 30901-02 (34931) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

260

6685-01-528-6695

GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATING (Bosun's Locker) 10180103CC (IBZ02)


60

128

EA

40

20

80

100

261

6685-01-528-6180

GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATING (Vestibule Vidmar Cabinets) RK 18-1104 (55752)

128

EA

262

6685-01-248-4463

GAGE, DIFFERENTIAL, DIAL INDICATING 03560-0300 (0A0L9)

128

EA

0.4

0.6

0.2 0

0.8

bar

1.0

0163-65

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 263 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6680-01-271-6191 (3) DESCRIPTION, PART NUMBER/(CAGEC) GAGE, OIL PRESSURE (Bosun's Locker) 110822 (49576) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

264

6620-01-528-3611

GAGE, PRESSURE, DIAL INDICATING (Bosun's Locker) 45-1279-55-04L-0-200 (38056)


60 70

128

EA

50 40 30

80 20 10 0 100 90

265

6620-01-528-3612

GAGE, PRESSURE, DIAL INDICATING (Bosun's Locker) 45-127955-04L 0/300 PSI (38056)

128

EA

0163-66

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 266 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6685-00-057-1404 (3) DESCRIPTION, PART NUMBER/(CAGEC) GAGE, PRESSURE, DIAL INDICATING (Bosun's Locker) J0642J-001 (01170) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

267

5330-00-034-3868

GASKET (Bosun's Locker) 21149 (76122)

128

EA

268

5330-01-291-0552

GASKET (Bosun's Locker) TG-8.0911-B-0 (76588)

128

EA

269

5330-01-468-6298

GASKET (Bosun's Locker) 803-6397269PC 2 (53711)

128

EA

0163-67

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 270 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-01-295-3525 (3) DESCRIPTION, PART NUMBER/(CAGEC) GASKET (Bow Thruster Compartment) 1P0436 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

271

5330-00-012-3692

GASKET (Bow Thruster Compartment) 235158 (21444)

128

EA

272

5330-01-351-7678

GASKET (Bow Thruster Compartment) 508-13 (28353)

128

EA

273

5330-00-366-2130

GASKET (Bow Thruster Compartment) 8082104 (72915)

128

EA

0163-68

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 274 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-00-824-4781 (3) DESCRIPTION, PART NUMBER/(CAGEC) GASKET (Bow Thruster Compartment) 8209776 (72915) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

275

5330-00-010-4910

GASKET (Bow Thruster Compartment) 8312916 (72915)

128

EA

276

5330-01-288-5111

GASKET (Bow Thruster Compartment) 926126 (05779)

128

EA

277

5330-00-121-2653

GASKET (Bow Thruster Compartment) 050973 (87405)

128

EA

0163-69

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 278 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-01-228-6171 (3) DESCRIPTION, PART NUMBER/(CAGEC) GASKET (Bow Thruster Compartment) MP-14-13 (92021) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

279

5330-01-480-0664

GASKET (Bow Thruster Port S1) 0344-00 (08576)

128

EA

280

5330-00-540-2508

GASKET (Bow Thruster Port S1) 20-22031-2 (63705)

128

EA

281

5330-00-366-2131

GASKET (Bow Thruster Port S1) 8088673 (72915)

128

EA

0163-70

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 282 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-01-342-2553 (3) DESCRIPTION, PART NUMBER/(CAGEC) GASKET (Bow Thruster Port S1) 202-7 (81100) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

283

5330-01-528-8799

GASKET (Vestibule Vidmar Cabinets) 9999-Y3098C-AB (63544)

128

EA

284

5330-01-365-5783

GASKET (Vestibule Vidmar Cabinets D14) S1-4-009-4 (25204)

128

EA

285

5330-00-137-6706

GASKET (Vestibule Vidmar Cabinets D2) 9570894 (72915)

128

EA

0163-71

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 286 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-01-343-2669 (3) DESCRIPTION, PART NUMBER/(CAGEC) GASKET (Vestibule Vidmar Cabinets D3) D11-121 (58923) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

287

5330-01-269-7282

GASKET (Vestibule Vidmar Cabinets D3) 8268756 (72915)

128

EA

288

5330-01-529-2544

GASKET, FLANGE (Bow Thruster Compartment) 760125-020 (0B6K6)

128

EA

289

5330-01-499-8006

GASKET (Bow Thruster Port S2) JE269-1 (97537)

128

EA

0163-72

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 290 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-01-173-6651 (3) DESCRIPTION, PART NUMBER/(CAGEC) GASKET X41119.001 (83473) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I FT

291

5330-01-348-3340

GASKET 1227246 (21444)

128

EA

292

5330-01-312-3763

GASKET 0007-1989-750 (80871)

128

EA

293

5330-01-561-8051

GASKET 0007-2942-750 (80871)

128

EA

294

5330-01-183-6647

GASKET ST262Z5B (73124)

128

EA

0163-73

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 295 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-01-058-6949 (3) DESCRIPTION, PART NUMBER/(CAGEC) GASKET AND PREFORMED PACKING ASSORTMENT (Bosun's Locker) X11983-1 (70255) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

296

5330-01-275-2150

GASKET KIT (Bow Thruster Port S1) 3278364 (72915)

128

EA

297

5330-00-856-1558

GASKET SET (Bosun's Locker) 8261167 (72915)

128

EA

298

5325-01-348-7060

GROMMET, NONMETALLIC 925026 (05779)

128

EA

0163-74

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 299 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4140-01-528-8814 (3) DESCRIPTION, PART NUMBER/(CAGEC) GUARD, FAN IMPELLER (Vestibule Vidmar Cabinets) LA22LA025 (10855) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

300

4520-01-529-1089

HEATING ELEMENT, ELECTRICAL, NONIMMERSION TYPE (Vestibule Vidmar Cabinets) 110000608 (10855)

128

KT

301

4140-01-528-8941

IMPELLER, FAN, CENTRIFUGAL (Vestibule Vidmar Cabinets) 38GA5A1201B (10855)

128

EA

0163-75

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 302 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4140-01-528-8821 (3) DESCRIPTION, PART NUMBER/(CAGEC) IMPELLER, FAN, CENTRIFUGAL (Vestibule Vidmar Cabinets) LA01RA028 (10855) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

303

2940-00-192-7417

INDICATOR, FILTER WARNING, VEHICULAR ENGINE (Bow Thruster STBD S2) 7S0687 (11083)

128

EA

304

6680-01-059-0603

INDICATOR, SIGHT, LIQUID (Bosun's Locker) G-2004-36 (55260)

128

EA

0163-76

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 305 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6685-01-340-7799 (3) DESCRIPTION, PART NUMBER/(CAGEC) INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE (Vestibule Vidmar Cabinets D2) 9086874 (72915) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

306

2910-01-334-3856

INJECTOR ASSEMBLY, FUEL (Bow Thruster Port S1) 40043489-MP (72915)

128

AY

12

307

2990-01-192-2841

KIT, TUNE UP STARTER (Bosun's Locker) 150BM-TK2 (4P412)

128

EA

0163-77

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 308 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6240-01-168-1580 (3) DESCRIPTION, PART NUMBER/(CAGEC) LAMP, INCANDESCENT (Bosun's Locker) 4C7 (08805) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

309

6240-00-143-7419

LAMP, INCANDESCENT (Vestibule Vidmar Cabinets) 45-127955-04L 0/300 PSI (38056)

128

EA

310

6240-00-014-2306

LAMP, INCANDESCENT (Vestibule Vidmar Cabinets) AA52463-A03 (58536)

128

EA

311

6240-00-011-5273

LAMP, INCANDESCENT (Vestibule Vidmar Cabinets) M515573-1 (96906)

128

EA

0163-78

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 312 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6240-01-129-0768 (3) DESCRIPTION, PART NUMBER/(CAGEC) LAMP, INCANDESCENT (Vestibule Vidmar Cabinets) GL130 V (57715) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

313

6240-01-415-8477

LAMP, INCANDESCENT (Vestibule Vidmar Cabinets) PC1035-19 (63269)

128

EA

314

6240-01-316-4651

LAMP, INCANDESCENT (Vestibule Vidmar Cabinets) INX3528 (95405)

128

EA

315

6240-01-162-4086

LAMP, XENON XM1000-9HS (33030)

128

EA

0163-79

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 316 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6210-01-528-6982 (3) DESCRIPTION, PART NUMBER/(CAGEC) LENS, LIGHT (Bosun's Locker) MAX-A (02116) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

317

6230-00-152-2870

LIGHT, DESK (Bosun's Locker) M16377/15-148.2 (83149)

128

EA

318

6210-00-160-0340

LIGHT, INDICATOR (Vestibule Vidmar Cabinets) S14 (75346)

128

EA

319

6220-01-528-8811

LIGHT, INDICATOR 2450-00348 (63544)

128

EA

0163-80

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 320 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6210-01-170-4652 (3) DESCRIPTION, PART NUMBER/(CAGEC) LIGHT, INDICATOR 31601-02 (34931) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

321

6210-01-528-6216

LIGHT, WARNING (Towing Gear Locker) 89SMSTRR-AQ (1F889)

128

EA

322

3040-01-284-8954

LINING MATERIAL, FRICTION 0021-2823-020 (16236)

128

EA

323

3040-01-342-8705

LINING SET, FRICTION SB06598 (10055)

128

EA

0163-81

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 324 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5342-01-528-9050 (3) DESCRIPTION, PART NUMBER/(CAGEC) MECHANICAL DOG ASSE (Bosun's Locker) E333-3880 (81782) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

325

6625-01-286-4825

METER GP (Bow Thruster Compartment) 4W5556 (11083)

128

EA

326

6105-01-275-2146

12345

MOTOR, AIR START (Bow Thruster Compartment) 40047507 (72915)

128

EA

327

6105-00-569-9590

MOTOR, ALTERNATING CURRENT (Bow Thruster Compartment) 879-010855S00-0 (39433)

128

EA

0163-82

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 328 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6105-01-528-8797 (3) DESCRIPTION, PART NUMBER/(CAGEC) MOTOR, ALTERNATING CURRENT (Vestibule Vidmar Cabinets) HC414AE210 (10855) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

329

6105-01-528-8936

MOTOR, ALTERNATING CURRENT (Vestibule Vidmar Cabinets) PMO01AG100A (10855)

128

EA

330

6105-01-528-8801

MOTOR, ALTERNATING CURRENT (Vestibule Vidmar Cabinets) HC35GE235 (10855)

128

EA

0163-83

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 331 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2920-01-340-0400 (3) DESCRIPTION, PART NUMBER/(CAGEC) MOTOR, ENGINE STARTER, ELECTRICAL (Bow Thruster STBD S3) 9L5065 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

332

4730-01-528-6743

NIPPLE, TUBE (Vestibule Vidmar Cabinets) TCN 404 (05MH3)

128

EA

333

4730-01-528-6670

NIPPLE, TUBE (Vestibule Vidmar Cabinets) TCN 606 (05MH3)

128

EA

334

4730-01-528-5094

NIPPLE, TUBE (Vestibule Vidmar Cabinets) TCN-202 (05MH3)

128

EA

10

0163-84

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 335 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2910-01-169-9758 (3) DESCRIPTION, PART NUMBER/(CAGEC) NOZZLE, FUEL INJECTION NON AIRCRAFT (Bow Thruster Port S1) 8N7005 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 6

U/I EA

336

2910-01-292-5254

NOZZLE, FUEL INJECTION (Bow Thruster Port S1) 4W7018 (11083)

128

EA

337

2815-01-289-8355

OIL PUMP ASSEMBLY, ENGINE (Bow Thruster STBD S3) 4N8734 (11083)

128

EA

338

5331-01-529-1160

O-RING (Vestibule Vidmar Cabinets) E333-3873-T (81782)

128

EA

0163-85

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 339 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5331-01-528-6661 (3) DESCRIPTION, PART NUMBER/(CAGEC) O-RING (Vestibule Vidmar Cabinets) 2614014900 (1BZ02) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

340

5331-00-944-8281

O-RING (Vestibule Vidmar Cabinets D3) 3D2824 (11083)

128

EA

341

5331-01-171-4825

O-RING (Vestibule Vidmar Cabinets) B0612 2-008 (02697)

128

EA

0163-86

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 342 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5331-01-468-6828 (3) DESCRIPTION, PART NUMBER/(CAGEC) O-RING (Vestibule Vidmar Cabinets) 2614010100 (1BZ02) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 4

U/I EA

343

5331-01-342-0910

O-RING (Vestibule Vidmar Cabinets) 926908 (21444)

128

EA

344

5330-01-312-5939

O-RING (Vestibule Vidmar Cabinets) V72350 (51040)

128

EA

0163-87

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 345 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5331-01-339-0716 (3) DESCRIPTION, PART NUMBER/(CAGEC) O-RING (Vestibule Vidmar Cabinets) 8417454 (72915) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 14

U/I EA

346

5331-01-138-7111

O-RING (Vestibule Vidmar Cabinets) ST264-Z-5-B (73124)

128

EA

347

5331-01-239-7911

O-RING (Vestibule Vidmar Cabinets) ST266Z5B (73124)

128

EA

0163-88

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 348 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5331-01-528-6654 (3) DESCRIPTION, PART NUMBER/(CAGEC) O-RING (Vestibule Vidmar Cabinets) 07620301 WA-06 (1BZ02) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

349

5331-01-468-6835

O-RING (Vestibule Vidmar Cabinets) 2614010500 (1BZ02)

128

EA

350

5331-01-528-6701

O-RING (Vestibule Vidmar Cabinets) 2614015800 (1BZ02)

128

EA

0163-89

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 351 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5331-01-342-2542 (3) DESCRIPTION, PART NUMBER/(CAGEC) O-RING (Bow Thruster Port S1) 104-13 (21204) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

352

5331-01-342-2543

O-RING (Bow Thruster Port S1) 201-19 (21204)

128

EA

353

5331-01-342-2544

O-RING (Bow Thruster Port S1) 202-13 (21204)

128

EA

0163-90

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 354 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5331-01-342-3535 (3) DESCRIPTION, PART NUMBER/(CAGEC) O-RING (Bow Thruster Port S2) H-45112-3-1017 (71724) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 4

U/I EA

355

5331-00-007-6143

O-RING (DC Main Deck) MS29513-023 (81343)

128

EA

356

5331-01-528-8803

O-RING (Vestibule Vidmar Cabinets) 2850-00156 (63544)

128

EA

0163-91

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 357 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5331-01-424-4279 (3) DESCRIPTION, PART NUMBER/(CAGEC) O-RING (Vestibule Vidmar Cabinets D2) 93-120 ITEM 19 (62854) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

358

5331-00-606-8994

O-RING (Vestibule Vidmar Cabinets D3) 364-0417-457 (04579)

128

EA

359

5331-00-178-8605

O-RING (Vestibule Vidmar Cabinets D3) 711941 (07524)

128

EA

0163-92

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 360 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5331-01-342-2540 (3) DESCRIPTION, PART NUMBER/(CAGEC) O-RING (Vestibule Vidmar Cabinets D3) 101-13 (21204) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

361

5331-00-579-7916

O-RING (Vestibule Vidmar Cabinets) MS28775-115 (81343)

128

EA

362

5331-00-613-6522

O-RING (Vestibule Vidmar Cabinets) 2-117N951-75 (09990)

128

EA

0163-93

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 363 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5331-01-528-6725 (3) DESCRIPTION, PART NUMBER/(CAGEC) O-RING (Vestibule Vidmar Cabinets) 2614017900 (1BZ02) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

364

5331-00-582-7084

O-RING (Vestibule Vidmar Cabinets) 334-7407 (25184)

128

EA

365

5331-00-166-0993

O-RING (Vestibule Vidmar Cabinets) 649-393-017-0 (58828)

128

EA

0163-94

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 366 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-01-096-0912 (3) DESCRIPTION, PART NUMBER/(CAGEC) O-RING (Vestibule Vidmar Cabinets) 11083 (7J204) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

367

5330-00-612-3916

PACKING, PREFORMED (Vestibule Vidmar Cabinets) 1012 (53214)

128

EA

368

5330-01-021-0875

PACKING, PREFORMED (Vestibule Vidmar Cabinets) SP-19-13 (92021)

128

EA

369

5330-01-179-5910

PACKING, PREFORMED (Bow Thruster Port S1) V72010 (05779)

128

EA

0163-95

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 370 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-00-178-8602 (3) DESCRIPTION, PART NUMBER/(CAGEC) PACKING, PREFORMED (Vestibule Vidmar Cabinets D3) 711940 (07524) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

371

5330-00-178-8601

PACKING, PREFORMED (Vestibule Vidmar Cabinets) 701965 (07524)

128

EA

372

5330-00-929-9478

PACKING, PREFORMED (Vestibule Vidmar Cabinets) 8309544 (72915)

128

EA

373

4320-00-103-5655

PARTS KIT (Bosun's Locker) 14233 (76122)

128

EA

0163-96

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 374 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4820-01-473-0988 (3) DESCRIPTION, PART NUMBER/(CAGEC) PARTS KIT, BALL VALVE (Bosun's Locker) SPRTD1--A--1 (92021) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I KT

375

4820-01-490-2069

PARTS KIT, BALL VALVE (Bosun's Locker) SPRTE--A--1 (92021)

128

KT

376

3120-01-339-0861

PARTS KIT, BEARING REPLACEMENT, MECHANICAL EQUIPMENT (Bow Thruster Port S3) 8455081 (72915)

128

KT

0163-97

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 377 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4130-01-130-2238 (3) DESCRIPTION, PART NUMBER/(CAGEC) PARTS KIT, DEHYDRATOR (Bosun's Locker) X10574-1 (70255) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

378

2530-01-251-7717

PARTS KIT, DISK BRAKE SB06652 (72915)

128

KT

379

2930-01-343-8494

PARTS KIT, ENGINE WATER PUMP 40000927 (72915)

128

KT

380

4320-00-119-3802

PARTS KIT, ROTARY PUMP (Bosun's Locker) 14010242 (45396)

128

EA

0163-98

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 381 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-01-344-4298 (3) DESCRIPTION, PART NUMBER/(CAGEC) PARTS KIT, SEAL REPLACEMENT, MECHANICAL EQUIPMENT 9580777 (72915) PARTS KIT, SEAL REPLACEMENT, MECHANICAL EQUIPMENT (Vestibule Vidmar Cabinets) 659275183 (05MH3) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I KT

382

5330-01-528-6648

128

EA

383

5330-01-468-4194

PARTS KIT, SEAL REPLACEMENT, MECHANICAL EQUIPMENT (Bosun's Locker) B652090002 (1BZ02)

128

KT

384

6620-01-596-3431

PILOT LIGHT, RED (Vestibule Vidmar Cabinets) LA3P-1C04-R (3F6K8)

128

EA

0163-99

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 385 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4820-00-596-3712 (3) DESCRIPTION, PART NUMBER/(CAGEC) PISTON, VALVE 1010 (53214) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

OPEN

386

5365-01-528-8637

PLUG, MACHINE THREAD (Vestibule Vidmar Cabinets) 2453502400 (1BZ02)

128

EA

387

2815-01-342-9119

POWER UNIT, DIESEL 9579070 (72915)

128

EA

POWER UNIT, DIESEL

ILLUSTRATION NOT AVAILABLE

0163-100

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 388 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4330-01-528-6826 (3) DESCRIPTION, PART NUMBER/(CAGEC) PROBE, FUEL FILTERWATER SEPARATOR (Vestibule Vidmar Cabinets) RK 18225 (55752) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

389

4320-01-336-1422

PUMP, CENTRIFUGAL (Bow Thruster Port S1) 28521 (76122)

128

EA

390

4320-01-339-5152

PUMP, CENTRIFUGAL (Bow Thruster Port S4) 8269664 (72915)

128

EA

391

4320-01-202-5609

PUMP, CENTRIFUGAL (Bow Thruster STBD S2) 5N9356 (11083)

128

EA

0163-101

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 392 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4320-01-202-5611 (3) DESCRIPTION, PART NUMBER/(CAGEC) PUMP, CENTRIFUGAL (Bow Thruster STBD S3) 1727771 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I GP

393

2930-01-498-2770

PUMP, COOLING SYSTEM, ENGINE (Bow Thruster Compartment) 1727767 (11083)

128

EA

394

2930-01-199-8071

PUMP, COOLING SYSTEM, ENGINE 1371338 (11083)

128

EA

0163-102

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 395 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2910-01-021-1845 (3) DESCRIPTION, PART NUMBER/(CAGEC) PUMP, ENGINE PRIMING, HAND DRIVEN (Bow Thruster STBD S2) 1052508 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

396

2910-01-339-7959

PUMP, ENGINE PRIMING, HAND DRIVEN (Bow Thruster Compartment) 4W9838 (11083)

128

EA

397

2910-01-340-0393

PUMP, ENGINE PRIMING, HAND DRIVEN (Bow Thruster Compartment) 8N3365 (11083)

128

EA

398

2910-01-340-0392

PUMP, ENGINE PRIMING, HAND DRIVEN (Bow Thruster Compartment) 8N5251 (11083)

128

EA

0163-103

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 399 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2910-01-289-2257 (3) DESCRIPTION, PART NUMBER/(CAGEC) PUMP, FUEL METERING AND DISTRIBUTING (Bow Thruster STBD S2) 4N1101 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

400

2910-01-268-2316

PUMP, FUEL (Bow Thruster Compartment) 8410219 (72915)

128

EA

401

4320-00-366-2974

PUMP, OIL, LUBRICATING (Bosun's Store Room S1) 8084556 (72915)

128

AY

402

4320-01-528-8738

PUMP, RECIPROCATING (Bow Thruster Compartment) 31620-0094 (31425)

128

EA

0163-104

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 403 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4320-01-472-6430 (3) DESCRIPTION, PART NUMBER/(CAGEC) PUMP, RECIPROCATING (Bow Thruster Compartment) 12180512CO (1BZ02) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

404

4320-01-163-3545

PUMP, RECIPROCATING (Bow Thruster Port S1) 1W1695 (11083)

128

EA

405

4320-01-103-8054

PUMP, ROTARY (Tool Cage EOS A3) 34401 (88758)

128

EA

406

5930-01-322-1896

PUSH BUTTON (Vestibule Vidmar Cabinets) QDD-111/110/K11 (57715)

128

EA

START

STOP

0163-105

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 407 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4730-01-528-6634 (3) DESCRIPTION, PART NUMBER/(CAGEC) REDUCER, PIPE (Vestibule Vidmar Cabinets) 1317021907 (1BZ02) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

408

4730-01-528-6677

REDUCER, TUBE (Vestibule Vidmar Cabinets) NRB 3412 (05MH3)

128

EA

409

5945-01-528-8893

RELAY, ELECTROMAGNETIC (Vestibule Vidmar Cabinets) AZ2280-1A-24A (10855)

128

EA

0163-106

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 410 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5945-01-528-8740 (3) DESCRIPTION, PART NUMBER/(CAGEC) RELAY, ELECTROMAGNETIC (Vestibule Vidmar Cabinets) HN52KC025 (10855) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

411

5945-01-528-8921

RELAY, ELECTROMAGNETIC (Vestibule Vidmar Cabinets) PCC01GA020A (10855)

128

EA

412

5945-01-528-8792

RELAY, ELECTROMAGNETIC (Vestibule Vidmar Cabinets) HN67KA071 (10855)

128

EA

0163-107

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 413 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5945-01-414-9287 (3) DESCRIPTION, PART NUMBER/(CAGEC) RELAY, ELECTROMAGNET (Vestibule Vidmar Cabinets) G1-RH2BU (09051) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

414

5945-00-258-3096

RELAY, ELECTROMAGNET (Vestibule Vidmar Cabinets) 8051JN2 (56365)

128

EA

415

4730-01-528-5087

RESTRICTOR, FLUID FLOW (Vestibule Vidmar Cabinets) 2453512400 (1BZ02)

128

EA

0163-108

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 416 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-01-342-5528 (3) DESCRIPTION, PART NUMBER/(CAGEC) RETAINER, PACKING (Vestibule Vidmar Cabinets D2) 01-400-0120 (62854) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

417

5330-01-342-5527

RETAINER, PACKING (Vestibule Vidmar Cabinets D2) 01-400-0140 (62854)

128

EA

418

5330-01-295-4720

RETAINER, PACKING (Vestibule Vidmar Cabinets D3) 7382 (96151)

128

EA

0163-109

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 419 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-01-037-6369 (3) DESCRIPTION, PART NUMBER/(CAGEC) RUBBER SHEET, SOLID (Bosun's Locker) MIL-G-1149 (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I SH

420

5330-00-545-3145

SEAL (Vestibule Vidmar Cabinets) 8228321 (72915)

128

EA

421

5330-01-178-1589

SEAL (Bow Thruster Port S1) 9050 (96151)

128

EA

0163-110

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 422 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-00-178-8574 (3) DESCRIPTION, PART NUMBER/(CAGEC) SEAL (Machine Shop D9) 331934 (07524) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

423

5330-01-178-1586

SEAL (Vestibule Vidmar Cabinets) 14559-006 (96151)

128

EA

424

4320-00-704-3552

SEAL ASSEMBLY, SHAFT, SPRING LOADED (Tool Cage EOS B1) G14-229 (58923)

128

EA

425

5330-00-146-7307

SEAL OIL (Vestibule Vidmar Cabinets) 712-6322-653 (04579)

128

EA

0163-111

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 426 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-01-469-1838 (3) DESCRIPTION, PART NUMBER/(CAGEC) SEAL, PLAIN (Vestibule Vidmar Cabinets) 12180510CO-21 (1BZ02) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 12

U/I EA

427

5330-01-287-8816

SEAL, PLAIN 8644614-05 (18894)

128

EA

428

5330-01-295-4662

SEAL, PLAIN (Vestibule Vidmar Cabinets) 9057-9 (96151)

128

EA

429

5330-01-219-7048

SEAL, PLAIN (Vestibule Vidmar Cabinets) 9121-1 (96151)

128

EA

0163-112

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 430 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5330-01-343-2647 (3) DESCRIPTION, PART NUMBER/(CAGEC) SEAL, PLAIN (Vestibule Vidmar Cabinets D3) 01-4050490 (62854) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

431

5330-01-339-8819

SEAL, PLAIN ENCASED (Machine Shop D9) 712-6321-653 (04579)

128

EA

432

5331-01-313-5633

SEAL, PLAIN ENCASED 0008-2533-000 (80871)

128

EA

433

4730-01-060-6150

SLEEVE, COMPRESSION, TUBE-HOSE FITTING (Vestibule Vidmar Cabinets) SS-400-SET (02570)

128

EA

10

0163-113

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 434 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4730-01-060-6151 (3) DESCRIPTION, PART NUMBER/(CAGEC) SLEEVE, COMPRESSION, TUBE-HOSE FITTING (Vestibule Vidmar Cabinets) SS-600-SET (02570) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 10

U/I SE

435

2990-01-291-1794

STARTER, ENGINE, AIR (Tool Gage EOS A2) 6N4147 (11083)

128

EA

436

2940-00-366-1164

STRAINER ELEMENT, SEDIMENT 8303586 (72915)

128

EA

437

2910-00-106-1809

STRAINER ELEMENT, SEDIMENT (Bow Thruster Port S1) 9324489 (72915)

128

EA

0163-114

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 438 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5930-01-528-6737 (3) DESCRIPTION, PART NUMBER/(CAGEC) SWITCH, FLOW (Vestibule Vidmar Cabinets) 2301020658 (1BZ02) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

439

5930-01-232-6246

SWITCH, LIQUID LEVEL (Bow Thruster Port S1) 110679 (04034)

128

EA

440

5930-01-528-6706

SWITCH, PRESSURE (Bosun's Locker) 2321020458 (1BZ02)

128

EA

0163-115

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 441 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5930-01-157-5421 (3) DESCRIPTION, PART NUMBER/(CAGEC) SWITCH, PRESSURE (Bosun's Locker) 486536 (0KDP7) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

442

5930-01-528-8348

SWITCH, PROXIMITY (Bosun's Locker) D333-3882-A (81782)

128

EA

443

5930-01-528-8817

SWITCH, PUSH (Vestibule Vidmar Cabinets) 5100-00569 (63544)

128

EA

444

5930-01-528-8806

SWITCH, PUSH 5100-00568 (63544)

128

EA

0163-116

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 445 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5930-01-529-2397 (3) DESCRIPTION, PART NUMBER/(CAGEC) SWITCH, SENSITIVE (Vestibule Vidmar Cabinets) 2PL-165 (10855) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

446

5930-01-528-8889

SWITCH, SENSITIVE (Vestibule Vidmar Cabinets) L-165 (10855)

128

EA

447

5930-01-528-8790

SWITCH, THERMOSTATIC (Vestibule Vidmar Cabinets) HH18HA281 (10855)

128

EA

448

4730-01-528-6671

TEE, TUBE (Vestibule Vidmar Cabinets) W54176-003 (75906)

128

EA

0163-117

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 449 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6685-01-528-8512 (3) DESCRIPTION, PART NUMBER/(CAGEC) THERMOSTAT, FLOW CONTROL (Vestibule Vidmar Cabinets) TSTATCCPHP01-B (10855)
Tu AM

0163

(4) USABLE ON CODE 128

(5)

(6) QTY RQR 1

U/I EA

Mode Off Fan

WAKE

72

AUTO

76 68 6:00
COOL HEAT

COPY PREVIOUS DAY

PROGRAM

MODE

CHANGE DAY

END

FAN

SET TIME/TEMP

RESET FILTER

HOLD

450

5950-01-528-8796

TRANSFORMER, POWER (Vestibule Vidmar Cabinets) HT01BD242 (10855)

128

EA

451

4820-01-296-5700

VALVE, BALL (Bow Thruster Port S2) 3035-13 (08576)

128

EA

452

4820-01-348-7357

VALVE, CALIBRATED FLOW (Bosun's Locker) F800 (09990)

128

EA

0163-118

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 453 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4820-01-343-3612 (3) DESCRIPTION, PART NUMBER/(CAGEC) VALVE, CHECK (Bow Thruster Port S2) 926758 (05379) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

454

4820-01-342-2474

VALVE, FLOW CONTROL (Bosun's Locker) V500P-8 (18725)

128

EA

455

4820-01-248-5111

VALVE, LINEAR DIRECTIONAL CONTROL (Bosun's Locker) F011-111 ITEM 5 (0SM11)

128

EA

456

4820-01-248-8880

VALVE, LINEAR DIRECTIONAL CONTROL (Bow Thruster Port S1) M000-20362 (18925)

128

EA

0163-119

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 457 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4820-01-306-4571 (3) DESCRIPTION, PART NUMBER/(CAGEC) VALVE, LINEAR DIRECTIONAL CONTROL (Machine Shop D8) 41462-1000 (18925) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

458

4820-01-248-8879

VALVE, LINEAR DIRECTIONAL CONTROL (Vestibule Vidmar Cabinets D2) M000-20287 (18925)

128

EA

459

4810-01-529-1156

VALVE, LINEAR, DIRECTIONAL CONTROL (Vestibule Vidmar Cabinets) E333-3878-L (81782)

128

EA

0163-120

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 460 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4820-01-342-2966 (3) DESCRIPTION, PART NUMBER/(CAGEC) VALVE, LINEAR, DIRECTIONAL CONTROL (Bow Thruster Port S1) F041-0004 (0A0L9) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

461

4820-01-348-1602

VALVE, LINEAR, DIRECTIONAL CONTROL (Bow Thruster Port S1) 916620 (21444)

128

EA

462

4820-01-347-6074

VALVE, REGULATING, FLUID PRESSURE (Bow Thruster Compartment) 2905178 (21444)

128

EA

0163-121

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 463 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4820-01-182-6703 (3) DESCRIPTION, PART NUMBER/(CAGEC) VALVE, SAFETY RELIEF (Bosun's Locker) SS-8CPA2-3 (02570) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

464

4820-01-227-1010

VALVE, SAFETY RELIEF (Fan Room Port) H172-106 (18925)

128

EA

465

4820-01-347-8384

VALVE, SAFETY RELIEF, 120 PSI (Bow Thruster STBD S4) VJ5-R-HS/XS (8A634)

128

EA

0163-122

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 466 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4820-01-342-0576 (3) DESCRIPTION, PART NUMBER/(CAGEC) VALVE, SHUTTLE (Bow Thruster Port S2) 3650-9001 (18925) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

467

4810-01-528-6745

VALVE, SOLENOID (Bosun's Locker) 1401095998 (1BZ02)

128

EA

468

4810-01-342-0573

VALVE, SOLENOID (Bow Thruster Port S2) M018A43 (63269)

128

EA

0163-123

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 1. Components of End Item/On-Board Spares List (1) ITEM NUMBER 469 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5310-01-342-7255 (3) DESCRIPTION, PART NUMBER/(CAGEC) WASHER, KEY (Vestibule Vidmar Cabinets) 2012 (53214) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

0163-124

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 1 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-01-345-5330 Basic Issue Items (BII). (3) DESCRIPTION, PART NUMBER/(CAGEC) ADAPTER FT915 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

5120-00-302-5856

ADAPTER, MECHANICAL 8019 (45225)

128

EA

5120-01-345-4526

ADAPTER, NOZZLE FT1533 (11083)

128

EA

5120-01-275-9481

ADAPTER, TORQUE WRENCH 9519601 (72915)

128

EA

0163-125

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 5 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6350-01-398-8940 Basic Issue Items (BII) - Continued. (3) DESCRIPTION, PART NUMBER/(CAGEC) ALARM, SMOKE, AUTOMATIC (Fitted) 2002 (56914) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 4

U/I EA

6625-01-354-7300

AMMETER (DC Locker) DSA-2003 (58935)

128

EA

2040-01-598-3210

ANCHOR, SEA 36X70 (Fitted) MODEL 922 (7T351)

128

EA

2040-01-598-3211

ANCHOR, SEA, OIL CAN 939-X (7T351)

128

EA

0163-126

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 9 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4210-00-372-0865 Basic Issue Items (BII) - Continued. (3) DESCRIPTION, PART NUMBER/(CAGEC) APPLICATOR, NOZZLE, FOG, 10' (Main Deck, Aft Stbd Blkhd; Forecastle, FWD) 803-595223ASSY99 (80064) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

10

4210-00-372-0864

APPLICATOR, NOZZLE, FOG, 4' (Eng Rm, Amidship; 01 Deck Passageway) 803-59592223ASSY98 (80064)

128

EA

11

8415-00-082-6108

APRON, UTILITY (DC Main Deck DE) AA-55063 (58536)

128

EA

0163-127

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 12 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8415-00-250-2531 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) APRON, WELDER'S (DC Main Deck DE) A-A-55098 (58536) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

13

5120-00-273-0085

AUGER, PIPE & SEWER, 1/4" X 25' LG, TYPE 4, CLASS 1 (Machine Shop D8) 5875 (98031)

128

EA

14

5120-00-273-0083

AUGER, PIPE & SEWER, HAND (Machine Shop D8) 4619 (98031)

128

EA

0163-128

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 15 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4240-00-022-2946 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) AURAL PROTECTOR, SOUND, TYPE 2 (Machine Shop D5) A-A-58084 (58536) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 12

U/I EA

16

4210-00-142-4949

AXE, PICK HEAD, 6 LBS (2.7 kg), TYPE 2 (Fan Room Main Deck) GGGA926TYPE2 (15852)

128

EA

17

6605-00-240-5599

AZIMUTH CIRCLE MK 4 MOD 1 (Bosun's Store Room S29) MIL-C-24230 (81349)

128

EA

0163-129

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 18 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4210-01-038-6001 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) BALL, VALVE, PORTED (Fan Room Port) BG104N (20266) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

19

5120-00-224-1389

BAR, PRY 8041183 (72915)

128

EA

20

5120-00-224-1372

BAR, PRY, OFFSET, 3/4" DIA, 26 IN LONG, TYPE 3, SZ 3 (Machine Shop, AMS2) 15840 (79202)

128

EA

0163-130

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 21 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-293-0665 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) BAR, WRECKING, 30 IN, SIZE 4, TYPE 5, CLASS 1, STYLE A (Machine Shop D9) 55-130 (ICV05) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

22

6685-01-598-2269

BAROMETER, ANEROID WEATHER (Arms Room) PRB (ORNEO)

128

EA

23

4910-00-366-1382

BASKET, WIRE, SPECIAL 8060247 (72915)

128

EA

0163-131

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 24 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6350-00-256-9062 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) BELL, SHIP, 30 LBS 1 1-1/2 DIA DECK AND BULKHEAD (Bosun's Locker) D24673-5 (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

25

5120-00-808-6191

BENDER, TUBE, HAND, MULTIPLE, SIZE 3 (Machine Shop D2) 350-FHA (85688)

128

EA

26

6650-00-530-0974

BINOCULAR 7 X 50, TYPE M17A1 (Arms Room ) B13656TYPEM17A1 (81349)

128

EA

27

7210-00-715-7985

BLANKET, BED, WOOL (Linen Locker) 2418090 (ONSE3)

128

EA

42

0163-132

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 28 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6510-01-242-2271 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) BLANKET, BURN 72 INCHES X 60 INCHES (Medical Locker) P7260-4P (1BJ97) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

29

3940-00-068-9173

BLOCK TACKLE, 4 1/2", DOUBLE SHEAVE, 5100 (Fan Room Main Deck) AA59808-32C (58536)

128

EA

30

3940-00-820-5145

BLOCK, TACKLE, 4 1/2 IN, SINGLE SHEAVE, 4800 LBS. 1/2 IN (Fan Room Main Deck) GGG-B-490 (81348)

128

EA

31

7330-00-078-5706

BOARD, FOOD CHOPPING AND SLICING, 15 X 20 X 3/4" (Galley) 7330-00-078-5706 (80244)

128

EA

0163-133

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 32 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5306-01-343-7181 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) BOLT (3/8 IN 24 NFX 5 IN LONG) 1A2116 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

33

5306-00-366-1385

BOLT, EYE 8040413 (72915)

128

EA

34

5306-01-094-9106

BOLT, MACHINE OS1590 (11083)

128

EA

35

7610-00-263-9737

BOOK, AMERICAN ELEC HANDBOOK, ELECTRICIANS (DC Locker) 70471061 (091G2)

128

EA

0163-134

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 36 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7610-00-263-9714 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) BOOK, MODERN ENGRS MANUAL, VOL 1 (DC Main Deck) 7610-00-263-9714 (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

37

7610-00-244-8719

BOOK, MODERN SEAMANSHIP VOL 1 (Arms Room) 471289485 (95543)

128

EA

38

8430-00-753-5935 8430-00-753-5936 8430-00-753-5937 8430-00-753-5938 8430-00-753-5939 8430-00-753-5940 8430-00-753-5941 8430-00-753-5942 8430-00-753-5943 8430-00-753-5944 8430-00-753-5945

BOOTS, FIREMEN'S, SIZE 5 BOOTS, FIREMEN'S, SIZE 6 BOOTS, FIREMEN'S, SIZE 7 BOOTS, FIREMEN'S, SIZE 8 BOOTS, FIREMEN'S, SIZE 9 BOOTS, FIREMEN'S, SIZE 10 BOOTS, FIREMEN'S, SIZE 11 BOOTS, FIREMEN'S, SIZE 12 BOOTS, FIREMEN'S, SIZE 13 BOOTS, FIREMEN'S, SIZE 14 BOOTS, FIREMEN'S, SIZE 15 A-A-50371B (58536)

128

PR

0163-135

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 39 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2530-00-248-3871 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) BOOT, PROTECTIVE 8062033 (72915) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

40

5340-00-366-1387

BOOT, PROTECTIVE, ROD 8062034 (24617)

128

EA

41

7350-00-251-8746

BOWL, EATING, PLASTIC, 5-3 W4 DIA. (Galley) 7350-00-251-8746 (80244)

128

DZ

42

7330-00-241-8168

BOWL, FOOD MIXING, STAINLESS STEEL 7 1/2 GAL (Galley) 7330-00-241-8168 (80244)

128

EA

0163-136

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 43 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7330-00-205-3198 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) BOWL, FOOD MIXING, STAINLESS STEEL, 1 1/2 QT (Galley) 7330-00-205-3198 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I BX

44

7330-00-205-3337

BOWL, FOOD MIXING, STAINLESS STEEL, 3 QT, 9-3/4" DIA (Galley) 7330-00-205-3337 (80244)

128

EA

45

7330-00-262-2323

BOWL, FOOD MIXING, STAINLESS STEEL, 5 QT, 11" DIA (Galley) 7330-00-262-2323 (80244)

128

EA

46

7330-00-685-5013

BOWL SET, FOOD MIXING, 3 PC STAINLESS (Galley) 7330-00-685-5013 (80244)

128

SE

0163-137

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 47 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7920-00-285-9100 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) BRUSH, BOTTLE AND BURET 3153774PC625 (80064) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I DZ

48

5130-01-348-5292

BRUSH, CLEANING, VALVE GUIDE (Machine Shop) 8141439 (72915)

128

EA

49

7920-00-1165-7277

BRUSH, DUSTING BENCH (Workshop, AMS2) 8148439 (80064)

128

EA

50

4730-01-235-5782

BUSHING, PIPE (Machine Shop, AMS2) 209P-12-4 (93061)

128

EA

0163-138

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 51 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7330-00-550-7592 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) BUTCHERS STEEL, 10" BLADE TYPE 12 GRADE C (Galley) A-A-2733 (58536) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

52

7125-00-132-8973

CABINET, KEY, 75 KEY, STEEL GRAY, TYPE 2 (On Station) A-A-2547 (58536)

128

EA

53

4010-01-529-4759

CABLE ASSY, RETIEVING WIRE (1/2" X 200') (Towing Gear Locker) 13226E6327-1 (97403) CABLE ASSY, TOWING BRIDLE (1-5/8" X 600') (1-5/8" X 600') (Towing Gear Locker) 13226E6327-2 (97403) CALIBRATION GAS, 60% LEL, 60PPM CO2 (Machine Shop, AMS2) 478191 (8F723)

128

EA

54

4010-01-529-4761

128

EA

55

6830-01-529-8726

128

EA

0163-139

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 56 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6830-01-331-9024 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) CALIBRATION GAS, MIXTURE, 10 PPM H2S (Machine Shop, AMS2) H2S/N2 (13873) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

57

5120-00-554-7134

CALIPER SET, MICROMETER, OUTSIDE (Machine Shop D9) S436 RN 0-6IN. GRAD 0.001IN. (57163)

128

SE

58

7240-00-282-8411

CAN, FLAMMABLE WASTE, FOOT OPERATED, 6 GAL (22.7L) (Machine Shop CAB A) 09100 (32572)

128

EA

0163-140

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 59 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7240-00-160-0440 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) CAN, GARBAGE W/O COVER, 32 GAL (121.1 L) (Machine Shop) 90146HDC (OT115) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

60

7240-01-337-5269

CAN. MILITARY (5 GAL) GASOLINE CAN (PLASTIC) (01 Level Exterior Aft) 10502788 (56161)

128

EA

61

7330-01-605-7641

CANISTER, FOOD STORAGE (Flour and Sugar) 24543 (02882)

128

EA

62

7330-00-266-7449

CANISTER, FOOD STORAGE, TEA (Galley) 7330-00-266-7449 (80244)

128

EA

0163-141

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 63 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-529-4124 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) CARRIER, STORAGE BATTERY, SIZE 20 (Machine Shop D9) 541 (80534) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

64

4610-01-022-9970

CARTRIDGE, WATER DEMINERALIZER, ION EXCHANGE (Galley) 255340 (3BSP4)

128

EA

65

6545-00-926-6660

CASE, HOSPITAL LINENS 654500926660 (9G536)

128

EA

32

66

4010-01-206-5590

CHAIN, STUD, LINK, 1-1/2 X 90' (Towing Gear Locker) MIL-C-24633 (81349)

128

EA

0163-142

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 67 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6130-01-529-4538 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) CHARGER, BATTERY, 110 V (DC Locker) 09-0051-01 (1XRW6) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

68

5110-00-222-2128

CHISEL, CAPE, HAND, NORMAL-DUTY, 6-1/2 X 3/8 (DC Main Deck DE) G10-2128 (20728)

128

EA

69

6645-01-282-1928

CHRONOMETER WITH BOX (Arms Room) 20806 (54121)

128

EA

70

5120-00-529-3744

CLAMP, "C", HEAVY 4-1/2" TO 2-3/4" (Tool Cage EOS A1) A-A-433 (58536)

128

EA

0163-143

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 71 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-180-0909 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) CLAMP, "C", LIGHT 6" OPENING, 2-3/4" DP (Tool Cage EOS A4) 406 (0M198) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 4

U/I EA

72

5120-00-203-6431

CLAMP, "C", MEDIUM, 9 X 2-1/4" (Machine Shop D8) S34251 (08292)

128

EA

73

5120-00-176-8617

CLAMP CONNECTING ROD 8417881 (72915)

128

EA

74

7910-00-550-9120

CLEANER, VACUUM, ELECTRIC (Cleaning Locker) MODEL 2815 (80029)

128

EA

0163-144

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 75 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7910-00-550-9123 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) CLEANER, VACUUM, ELECTRIC (Cleaning Locker) 7910-00-550-9123 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

76

5120-01-276-5941

CLEANING TOOL, PIPE 8087086 (72915)

128

EA

77

6605-00-825-5618

CLINOMETER, SHIP HEEL (Fitted Main Deck DC) AA59308-1A (58536)

128

EA

78

6605-00-818-3897

CLINOMETER, SHIP TRIM (Fitted Arms Room) AA59308-IIC (58536)

128

EA

0163-145

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 79 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7310-01-374-2669 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) COFFEE MAKER, AUTOMATIC (Pilothouse) OT-15 (25628) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

80

7310-00-144-4707

COFFEE MAKER, PERCOLATOR (30 CUP) (Galley) A50354-II-30 (58536)

128

EA

81

7330-00-680-2762

COLANDER, ALUMINUM, 11 QT, STYLE 2 (Galley) A-A-469 (58536)

128

EA

82

6630-01-067-3827

COMPARATOR, COLOR (Machine Shop D12) 6896 (34807)

128

SE

0163-146

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 83 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6630-01-024-0119 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) COMPARATOR, COLOR (Machine Shop DS) 5719 (08576) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

84

4310-01-541-4359

COMPRESSOR, EMERGENCY BREATHING AIR (01 Level, Aft Deck) C-D/DV/NAVY-SS (57328)

128

EA

85

5120-01-571-7034

COMPRESSOR, VALVE SPRING 8033783 (72915)

128

EA

86

5935-01-529-4569

CONNECTOR, PLUG (Shore Power Cable) DS4404FP000 (56501)

128

EA

0163-147

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 87 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-01-345-4527 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) CONTACT POINT (1-3/4 IN LONG) 3S-3270 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

88

7290-00-130-3271

COVER, IRONING BOARD 16 X 54" HEAT RESISTANT (Laundry Room) 7290-00-130-3271 (83421)

128

EA

89

7210-00-883-8492

COVER, MATTRESS, SIZED TO FIT MATTRESS (Linen Locker) 7210-00-883-8492 (83421)

128

EA

46

0163-148

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 90 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4220-01-486-8278 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) COVERALL, ANTIEXPOSURE, EXTRA LARGE (Staterooms) MS2175NV-XL (1CJ91) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

91

4220-01-486-8257

COVERALL, ANTIEXPOSURE, LARGE (Staterooms) MS2175NV-L (1CJ91)

128

EA

92

4220-01-486-8254

COVERALL, ANTIEXPOSURE, MEDIUM (Staterooms) MS2175NV-M (1CJ91)

128

EA

0163-149

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 93 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4220-01-486-8280 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) COVERALL, ANTIEXPOSURE, SMALL (Staterooms) MS2175NV-S (1CJ91) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

94

4210-01-468-5551

COVERALL, FIREFIGHTERS MEDIUM REGULAR GUARD97/NAVY1-SIZE MREGULAR (68291)

128

EA

95

4210-01-468-5528

COVERALL, FIREFIGHTERS, SMALL REGULAR GUARD97/NAVY1-SIZE SMREGULAR (68291)

128

EA

0163-150

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 96 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4210-01-468-5565 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) COVERALL, FIREFIGHTERS, LARGE REGULAR GUARD97/NAVY1-SIZE LREGULAR (68291) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 9

U/I EA

97

4210-01-468-5671

COVERALL, FIREFIGHTERS, X-LARGE REGULAR GUARD97/NAVY1-SIZE-XL REGULAR (68291)

128

EA

98

5120-00-224-1390

CROWBAR (Machine Shop D2) 10501985 (56161)

128

EA

0163-151

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 99 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7350-00-935-6635 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) CRUET, CONDIMENT, 6 OZ, 24 PER BOX (Galley) 735000-935-6635 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I BX

100

7230-00-849-9839

CURTAIN, SHOWER, PLASTIC 36" X 72" (Showers) 7230-00-849-9839 (80244)

128

EA

12

101

5180-00-596-1038

CUTTER AND FLARING TOOL KIT (Tool Cage EOS C3) PD5180-00-596-1038 (80244)

128

KT

102

5110-00-188-2524

CUTTER, BOLT, RIGID, CUPPER, 36 LONG (Bosuns Store Room) A-A-3047 (58536)

128

EA

0163-152

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 103 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5110-00-288-8722 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) CUTTER, CIRCLE, GASKET (DC Main Deck DD) PD5110-00-288-8722 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

104

5110-00-293-0460

CUTTER, PIPE, CUTS 1/8" TO 2" DIA (DC Main Deck DO) 32820 (50893)

128

EA

105

5110-00-221-1049

CUTTER, PIPE, WHEEL TYPE, CUTS 2" TO 4" (DC Main Deck S5) 32840 (50893)

128

EA

106

5110-00-529-5092

CUTTER, PIPE, WHEEL TYPE, CUTS 4 IN TO 6 IN (Machine Shop Cab A) 5110-00-529-5092 (80244)

128

EA

0163-153

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 107 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5110-00-224-7058 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) CUTTER, WIRE, ROPE, HAND OPERATED, HYDRAULIC (DC Main Deck DE) P1125 (85767) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

108

8120-00-268-3360

CYLINDER, ACETYLENE GAS (AMS2) MIL-C-3701 (81349)

128

EA

109

4240-01-515-7154

CYLINDER, AIR, SELFCONTAINED BREATHING 45 MIN (SCBA Cabinet, DC Locker and Vestibule) 084722-01 (15927)

128

EA

18

10 20 30 40

0163-154

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 110 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8120-00-357-7992 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) CYLINDER, OXYGEN (AMS2) C901/1-15 (81348) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

111

6665-01-463-4278

DETECTOR KIT, CHEMICAL AGENT (DC Main Deck S11) 5-77-3274 (81361)

128

EA

112

6665-01-529-8483

DETECTOR, GAS (MSA ORION MULTIGAS) (DC Locker) ORION 1111COP330C1210 (8F723)

128

EA

0163-155

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 113 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4940-01-166-7059 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) DETECTOR, LEAK, REFRIG, ELECTRONIC (Paint Locker Main Deck) T1FXL1 (16734) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

114

5136-00-357-7494

DIE AND TAP SET, THREAD CUTTING (Tool Cage EOS B1) FSM-7494 (1NEX4

128

SE

115

5110-00-289-0003

DIE SET, METAL STAMPING, HAND (DC Main Deck DD) 5110-00-289-0003 (80244)

128

SE

116

5110-00-289-0007

DIE SET, MTEAL STAMPING, HAND (Machine Shop D9) 5110-00-289-0007 (80244)

128

SE

0163-156

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 117 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7330-00-272-2488 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) DIPPER, KITCHEN, STAINLESS STEEL, 1 PT 8" HANDLE (Galley) A-A-1752 TYP2SZ0 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

118

7330-00-272-2489

DIPPER, KITCHEN, STAINLESS STEEL, 1/2 QT, 12" HANDLE (Galley) A-A-1752 TYPSZ1 (80244)

128

EA

119

5120-01-345-9845

DISASSEMBLY TOOL, WATER 9549072 (72915) DISHPAN, ROUND, STAINLESS STEEL 12 QT SZ1 (Galley) 7330-00-240-2201 (80244)

128

EA

120

7330-00-240-2201

128

EA

0163-157

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 121 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7330-00-190-5190 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) DISHPAN, ROUND, STAINLESS STEEL 24 QT SZ3 (Galley) 7330-00-190-5190 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

122

7350-00-205-0928

DISPENSER, PAPER NAPKINS, STAINLESS STEEL (Galley) 7350-00-205-0928 (80244)

128

EA

123

4510-00-585-6305

DISPENSER, PAPER TOWEL, STEEL CABINET, TYPE 3 (Fitted) C-200-W (1CMY5)

128

EA

22

124

7350-00-641-6050

DISPENSER, SUGAR, 12 OZ GLASS BODY (Galley) 7350-00-641-6050 (80244)

128

EA

0163-158

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 125 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7350-00-715-1369 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) DISPENSER, TOOTHPICK, STAINLESS STEEL 300 CAP (Galley) 7350-00-715-1369 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

126

7330-00-205-3155

DOUBLE BOILER, ALUMINIUM, HEAVY DUTY, 11 QT (Galley) 7330-00-205-3155 (80244)

128

EA

127

7330-00-205-3154

DOUBLE BOILER, DOMESTIC, ALUMINIUM 3 QT (Galley) 7330-00-205-3154 (80244)

128

EA

128

7330-00-984-4065

DOUBLE BOILER, INSTITUTIONAL 5-1/2 QT (Galley) 7330-00-984-4065 (80244)

128

EA

0163-159

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 129 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6675-00-926-4360 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) DRAFTING INSTRUMENT SET (Pilothouse) A52034-1 (58536) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I SE

130

6675-00-641-3531

DRAFTING INSTRUMENT SET (Pilothouse) A-A-52034 (58536)

128

SE

131

6675-00-286-0602

DRAFTING INSTRUMENT, NAVIGATION (Pilothouse) A-A-59373 58536

128

EA

0163-160

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 132 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7330-00-266-7454 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) DREDGER, KITCHEN 6-0310 (64616) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 10

U/I EA

133

6510-01-243-5894

DRESSING, BURN 4 INCHES X 16 INCHES (Medical Locker) 6-0310 (64616)

128

EA

16 in. 12 4 in. x icrobial Dressing Burn Antim

134

6510-01-243-5897

DRESSING, BURN 4 INCHES X 4 INCHES (Medical Locker) 0404-60 (1BJ97)

128

EA

4 in. 12 4 in. x icrobial Dressing Burn Antim

135

6510-01-239-9781

DRESSING, BURN, FIRST AID (Medical Locker) 0818-5 (1BJ97)

128

EA

EMERGENCY BURN KIT


BURNS

COMPLETE TREAT MENT PACK

0163-161

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 136 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5133-00-293-0983 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) DRILL SET, TWIST (Paint Locker Main Deck) DB129B (55719) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I SE

137

5133-00-449-6775

DRILL SET, TWIST, #3 MORSE TAPER SH (DC Main Deck D8) 18103 (067J8)

128

SE

138

5133-00-293-1161

DRILL SET, TWIST (Machine Shop) B94.11M (05047)

128

SE

0163-162

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 139 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5130-00-889-9004 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) DRILL, ELECTRIC, PORTABLE, 1/2" CAP (Machine Shop D11) 5130-00-889-9004 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

140

5130-00-293-1849

DRILL, ELECTRIC, PORTABLE, AC/DC, 115V, TYPE 3 CLASS A 650 RPM, 1/2 IN CAP HEAVY DUTY (Paint Locker Main Deck) 5130-00-293-1849 (80244)

128

EA

141

5130-00-473-6224

DRILL, ELECTRIC, PORTABLE, AC/DC, 115V 3/8" CAP (Machine Shop, AMS2) 5130-00-473-6224 (80244)

128

EA

142

5120-01-350-5903

DRIVER GROUP 1P510 (11083)

128

EA

0163-163

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 143 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7330-00-243-3408 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) EGG BEATER, HANDCRANK, DOUBLE BEATER (Galley) 7330-00-243-3408 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

144

7330-00-205-3336

EGG WHIP (Galley) A-A-394 (58536)

128

EA

145

4320-00-256-8206

EJECTOR, JET (Bow Thruster Port S2) 5000S4823-2501 (80064)

128

EA

146

4240-01-439-5937

EMERGENCY ESCAPE BREATHING DEVICE (EEBD) (On Station) M-20.2 (03WY2)

128

EA

27

0163-164

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 147 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4910-01-136-1058 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) ENGINE PRESSURE GROUP 1U5470 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

148

4910-01-137-0662

ENGINE TURNING TOOL 5P7305 & 5P7306 (11083)

128

EA

149

5820-01-591-7999

EPIRB, TYPE SATELLITE 406 MHZ (02 Level, Aft) 2842 (18560)

128

EA

150

5130-00-596-1062

ETCHER, ELECTRIC (Tool Cage EOS B2) OR (37201) 50 (37201)

128

EA

0163-165

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 151 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-177-7053 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) EXPANDER, PISTON RING 8349892 (72915) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

152

5120-00-323-9429

EXPANDER, PISTON RING 8171633 (72915)

128

EA

153

3456-01-598-4697

EXPANDER, TUBE (machine shop) MG-825 (0GGW8)

128

EA

154

5210-00-876-5390

EXTENSION, TORQUE WRENCH 8210136 (72915)

128

EA

0163-166

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 155 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4210-00-889-2491 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) EXTINGUISHER, FIRE, DRY CHEMICAL (Fan Room Port) A-A-393 A1C (58536) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 14

U/I EA

156

4930-01-268-7417

EXTRACTOR, ADAPTER 5P6229 (11083)

128

EA

157

5120-00-178-1267

EXTRACTOR, FUEL INJECTOR 85-2244 (11083)

128

EA

158

5120-00-240-5222

EXTRACTOR, SCREW, TAPERED, SPIRAL FLUTES, SIZE 4, DRILL STYLE, TYPE 1, CLASS 1, STYLE A (Machine Shop D1) 20204 (067J8)

128

EA

0163-167

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 159 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-240-5219 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) EXTRACTOR, SCREW, TAPERED, SPIRAL FLUTES, SIZE 5, DRILL STYLE, TYPE 1, CLASS 1, STYLE A (Machine Shop D1) 20205 (067J8) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

160

5120-00-240-5220

EXTRACTOR, SCREW, TAPERED, SPIRAL FLUTES, SIZE 6, DRILL STYLE, TYPE 1, CLASS 1, STYLE 1 (Machine Shop D1) C53656 (1NEX4)

128

EA

161

5120-00-240-5217

EXTRACTOR, SCREW, TAPERED, SPIRAL FLUTES, SIZE 7, DRILL STYLE, TYPE 1, CLASS 1, STYLE A (Machine Shop D5) C53657 (1NEX4)

128

EA

0163-168

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 162 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-240-5215 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) EXTRACTOR, SCREW, TAPERED, SPIRAL FLUTES, SIZE 9, DRILL STYLE, TYPE 1, CLASS 1, STYLE A (Machine Shop) C53659 (1NEX4) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

163

5120-00-242-1118

EXTRACTOR, SCREW, TAPERED, SPIRAL FLUTES, SIZE B, DRILL STYLE, TYPE 1, CLASS 1, STYLE A (Machine Shop D1) C53658 (1NEX4)

128

EA

164

5120-00-223-6954

EXTRACTOR, SCREW, TAPERED, SPIRAL FLUTES, SIZE 11, DRILL STYLE, TYPE 1, CLASS 1, STYLE A (DC Vidmar DC) C53661 (1NEX4)

128

EA

0163-169

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 165 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-223-6955 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) EXTRACTOR, SCREW, TAPERED, SPIRAL FLUTES, SIZE 12, DRILL STYLE, TYPE 1, CLASS 1, STYLE A (Tool Cage EOS A1) C53662 (1NEX4) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

166

5120-00-240-5216

EXTRACTOR, SCREW, TAPERED, SPIRAL FLUTES, SIZE 10, DRILL STYLE, TYPE 1, CLASS 1, STYLE A (Machine Shop CAB A) 11637 (63704)

128

EA

167

5120-00-240-5221

EXTRACTOR, SCREW, TAPERED, SPIRAL FLUTES, SIZE 1, DRILL STYLE, TYPE 1, CLASS 1, STYLE A (Machine Shop D1) B107.46M (5047)

128

EA

0163-170

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 168 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-223-9556 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) EXTRACTOR, STUFFING (Machine Shop) 1204-1 (76970) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

169

4240-00-542-2048

FACESHIELD, INDUSTRIAL, CLEAR, K11 PLASTIC VISOR (Machine Shop Cab 5) ANSI Z87.1 (80204)

128

EA

170

4140-01-333-2224

FAN, VANEAXIAL (Bosuns Store Room) 2000 MODEL WF-20 (52081)

128

EA

171

2040-00-821-0808

FENDER, MARINE 16 IN X 36 IN (Main Deck) 805-1340571-16X36IN (80064)

128

EA

0163-171

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 172 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2040-00-128-7982 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FENDER, MARINE 32 IN X 50 IN (Main Deck) 2040001287982 (03950) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 6

U/I EA

173

4020-01-387-8795

FIBER ROPE ASSEMBLY, SINGLE LEG (Bosun's Store Room S2) 228 (64249)

128

EA

174

5120-00-223-8921

FID, 12 IN (81349) (Machine Shop) A-A-52129 (58536)

128

EA

0163-172

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 175 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-223-8860 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FID, 18 LONG, TYPE 1, STYLE A (Machine Shop Cab C) A-A-52129 (58536) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

176

5110-00-204-2685

FILE SET, HAND (Machine Shop) 5110-00-204-2685 (80244)

128

SE

177

4210-01-335-7905

FIREMEN'S GLOVES, EXTRA LARGE 5200 (X-LARGE)(1HT35)

128

EA

178

4210-01-335-7904

FIREMEN'S GLOVES, LARGE 5200 LARGE(1HT35)

128

EA

0163-173

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 179 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4210-01-335-7903 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FIREMEN'S GLOVES, MEDIUM 5200-MEDIUM(1HT35) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

180

4210-01-335-7902

FIREMEN'S GLOVES, SMALL 5200/SMALL(1HT35)

128

EA

181

6545-00-656-1093

FIRST AID KIT, GENERAL PURPOSE, LIFEBOAT, 8 TO 12 PERSON (Bosuns Store Room) 6170-6 TY2 (04024)

128

EA

182

6545-00-656-1094

FIRST AID KIT, SHIP, 25 TO 30 PERSON) 6170-6 TY3 (04024)

128

EA

0163-174

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 183 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6545-01-526-9237 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FIRST AID, BURN TREATMENT (Medical Locker) AWK-1 (1BJ97) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I KT

184

4730-00-470-6625

FITTING KIT, TUBE-PIPE (Machine Shop) CS4730-0125 (16236)

128

EA

185

8345-00-262-2419

FLAG, IDENTIFICATION VESSEL, TC (Pilothouse) 5-1-121 (22571)

128

EA

SP E

A RH E A

D OF LOGISTI

CS

186

8345-00-245-2040

FLAG, NATIONAL, UNITED STATES, 1.5' X 2.1' (Pilothouse) DDD-F-416 (81348)

128

EA

0163-175

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 187 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8345-00-656-1434 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FLAG, NATIONAL USA, 2.3' X 4.5' (Pilothouse) DDD-F-416 (81348) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

188

8345-00-935-0464

FLAG, SIGNAL, "A" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0464 (83421)

128

EA

189

8345-00-935-0465

FLAG, SIGNAL, "B" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-0465 (83421)

128

EA

190

8345-00-935-0466

FLAG, SIGNAL, "C" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0466 (83421)

128

EA

0163-176

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 191 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8345-00-935-0467 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FLAG, SIGNAL, "D" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0467 (83421) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

192

8345-00-935-0468

FLAG, SIGNAL, "E" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0468 (83421)

128

EA

193

8345-00-935-0469

FLAG, SIGNAL "F" INTN'L CODE, SIZE 8 MIL-F-2692 (81349)

128

EA

194

8345-00-935-0470

FLAG, SIGNAL, "G" INTN'L CODE, SIZE8 (Pilothouse) 8345-00-935-0470 (83421)

128

EA

0163-177

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 195 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8345-00-935-0471 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FLAG, SIGNAL, "H" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0471 (83421) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

196

8345-00-935-0472

FLAG, SIGNAL , "I" INTN'L CODE, SIZE 8 (Pilothouse) MIL-F-2692 (81349)

128

EA

197

8345-00-935-0473

FLAG, SIGNAL, "J" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0473 (83421)

128

EA

198

8345-00-935-0474

FLAG, SIGNAL, "K" INTN'L CODE, SIZE (Pilothouse) 8345-00-935-0474 (83421)

128

EA

0163-178

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 199 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8345-00-935-0475 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FLAG, SIGNAL, "L" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0475 (83421) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

200

8345-00-935-0476

FLAG, SIGNAL, "M" INTN'L CODE, SIZE 8 (Pilothouse) MIL-F-2692 (81349)

128

EA

201

8345-00-935-0477

FLAG, SIGNAL "N" INTN'L CODE, SIZE 8 (Pilothouse) MIL-F-2692 (81349)

128

EA

202

8345-00-935-0478

FLAG, SIGNAL "O" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0478 (83421)

128

EA

0163-179

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 203 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8345-00-935-0479 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FLAG, SIGNAL "P" INTN'L CODE, SIZE 8 (Pilothouse) MIL-F-2692 (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

204

8345-00-935-0480

FLAG, SIGNAL "Q" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0480 (83421)

128

EA

205

8345-00-935-0481

FLAG, SIGNAL "R" INTN'L CODE, SIZE 8 (Pilothouse) MIL-F-2692 (81349)

128

EA

206

8345-00-935-0482

FLAG, SIGNAL "S" INTN'L CODE, SIZE 8 (Pilothouse) 16696 SH 7 A (80064)

128

EA

0163-180

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 207 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8345-00-935-0483 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FLAG, SIGNAL "T" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0483 (83421) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

208

8345-00-935-0484

FLAG, SIGNAL "U" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0484 (83421)

128

EA

209

8345-00-935-0485

FLAG, SIGNAL "V" INTN'L CODE, SIZE 8 (Pilothouse) MIL-F-2692 (81349)

128

EA

210

8345-00-935-0486

FLAG, SIGNAL "W" INTN'L CODE, SIZE 8 (Pilothouse) MIL-F-2692 (81349)

128

EA

0163-181

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 211 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8345-00-935-0487 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FLAG, SIGNAL "X" INTN'L CODE, SIZE 8 (Pilothouse) MIL-F-2692 (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

212

8345-00-935-0488

FLAG, SIGNAL "Y" INTN'L CODE, SIZE 8 (Pilothouse) MIL-F-2692 (81349)

128

EA

213

8345-00-935-0489

FLAG, SIGNAL "Z" INTN'L CODE, SIZE 8 (Pilothouse) MIL-F-2692 (81349)

128

EA

214

6230-00-269-3034

FLASHLIGHT, EXPLOSION PROOF (DC Locker and Vestibule) N35-1B (84609)

128

EA

0163-182

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 215 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6230-00-264-8261 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FLASHLIGHT (Towing Gear Locker) N47-1B (84609) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 14

U/I EA

216

7290-00-148-7068

FLAT IRON, ELECTRIC, STEAM AND DRY (Laundry Room) 16210 (0A987)

128

EA

217

6530-01-459-7983

FLOTATION KIT, LITTER, SEA-AIR-MED (DC Locker) 100 (64249)

128

EA

218

7330-00-810-1937

FOOD TURNER, 4-1/2" SLOTTED BLADE (Galley) A-A-1640 (58536)

128

EA

0163-183

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 219 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7330-00-634-1995 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FOOD TURNER, CAKE 7-1/2" SOLID BLADE (Galley) A-A-1640 (58536) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

220

7330-00-205-0617

FOOD TURNER, HAMBURGER, 3X4 2" BLADE (Galley) A-A-1640 (58536)

128

EA

221

5120-00-849-1141

FORCE CUP, PLUMBERS BALL SHAPED, TYPE II (Machine Shop D8) BALL TY BB2 GSA (85849)

128

EA

222

7340-00-223-7792

FORK, FOOD SERVICE, 21" LG (Galley) A-A-52204 (58536)

128

EA

0163-184

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 223 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7340-00-241-8169 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FORK, TABLE, PLAIN, 24 TO A BOX (Galley) 7340-00-241-8169 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I BX

224

4240-01-258-1245

FOUNTAIN, EYE AND FACE WASH (DC Locker) 32-00200-0000 (39SU9)

128

EA

225

6840-01-267-4346

FUNGICIDE (EYE & FACE WASH FOUNTAIN) (Medical Locker) 0102001 (16029)

128

BX

FUNGICIDE
FUNGICIDE (EYE & FACE WASH FOUNTAIN) FUNGICIDE (EYE & FACE WASH FOUNTAIN) FUNGICIDE (EYE & FACE WASH FOUNTAIN) FUNGICIDE (EYE & FACE WASH FOUNTAIN) FUNGICIDE (EYE & FACE WASH FOUNTAIN) (Medical Locker) (6M644) C2128

0163-185

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 226 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7240-00-404-9793 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) FUNNEL, PLASTIC, 1 QT 3U606 (25795) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I BX

227

7240-00-223-4482

FUNNEL, STEEL W/ STRAINER (Machine Shop) 605 (0T115)

128

EA

228

7240-00-230-2393

FUNNEL, W/SPOUT 1 PINT CAP (Machine Shop) 50 (3T537)

128

EA

0163-186

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 229 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6620-01-661-3550 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) GAGE 8107788 (72915) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

230

5120-00-366-1422

GAGE, ALIGNING 8071720 (72915)

128

EA

231

2815-01-123-5983

GAGE, GP VALVES 3H465 (11083)

128

EA

40

60

20

80

100

232

5210-00-880-7549

GAGE, INJECTOR RACK 8339610 (72915)

128

EA

0163-187

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 233 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-447-9669 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) GAGE, INJECTOR TIMING 8034638 (72915) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

234

6685-01-351-6868

GAGE, PRESSURE, DIAL INDICATING (DC Locker) G2515L (26952)

128

EA

235

6685-00-251-1360

GAGE, PRESSURE, DIAL (Tool Cage EOS B3)

128

EA

0163-188

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 236 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8415-00-264-3618 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) GLOVE SHELLS, ELECTRICAL WORKERS' (Bosun's Locker) ASTM F 696-85 (81346) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I PR

237

8415-01-267-9661

GLOVES, ANTIFLASH (DC Locker and Vestibule) MIL-G-2874 (81349)

128

PR

18

238

8415-01-013-7384

GLOVES, CHEMICAL AND OIL PROTECTIVE (Bosun's Locker) MIL-G-87066 (81349)

128

PR

0163-189

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 239 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8415-01-158-9455 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) GLOVES, ELECTRICAL WORKERS' (Bosun's Locker) E011B SIZE 10 (91019) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I PR

240

8415-01-394-0215

GLOVES, LEATHER (Bosun's Locker) 6170-5 (04024)

128

PR

241

8415-00-268-7869

GLOVES MEN'S AND WOMEN'S (Bosun's Locker) A-A-55060 (58536)

128

PR

0163-190

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 242 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8415-00-266-8677 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) GLOVES, RUBBER, INDUSTRIAL (Machine Shop CAB A) MIL-DTL-30266 (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I PR

243

8415-00-268-7860

GLOVES, WELDERS, GUNN CUT, REG SIZE (Machine Shop CAB A) A-A-50022 (58536)

128

PR

244

4240-00-052-3776

GOGGLES, INDUSTRIAL PLASTIC, SAFETY TYPE (Machine Shop) 4240-00-025-3776 (80204)

128

PR

245

4240-00-190-6432

GOGGLES, INDUSTRIAL (Machine Shop D5) ANSI Z87.1-1989 (80204)

128

PR

0163-191

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 246 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2040-00-238-9060 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) GRAPNEL, MARINE, 5 PRONG (Paint Locker) MIL-G-613 (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

247

7330-00-272-2518

GRATER, FOOD (Galley) 7330-00-272-2518 (80244)

128

EA

248

5120-01-350-5904

GUIDE, SEAL 6V7025 (11083)

128

EA

249

5120-00-194-1648

HAMMER, HAND, COPPER, SOFT HEAD BARREL, 2 LBS (Tool Cage EOS A1) (80244)

128

EA

0163-192

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 250 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-230-7843 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) HAMMER, HAND, DOUBLE FACED SLEDGE, 20 LBS (Machine Shop, AMS2) 11247 (7L527) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

251

5120-00-203-4656

HAMMER, HAND, DOUBE FAC, 2-1/2 LBS (Machine Shop, AMS2) 33009 (1BZ19)

128

EA

252

5120-00-224-4111

HAMMER, HAND, SCALING, BOILER PICK, 1 LB, TYPE 6 (DC Main Deck S5) AT-WH-10-G (96983)

128

EA

253

5120-00-255-1476

HAMMER, HAND, SHIP'S MAUL 5 LBS, TYPE 12 5 LBS, TYPE 12 (DC Locker) H-123 (79202)

128

EA

254

5120-00-224-4130

HAMMER, HAND, SLEDGE, BLACKSMITHS CROSSPEEN, 12 LBS, TYPE 10, CLASS 2 (Machine Shop Cab A) 11443 (63704)

128

EA

0163-193

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 255 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-242-3915 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) HAMMER, HAND, SLEDGE, BLACKSMITHS CROSSPEEN, 3 LBS, TYPE 10 CLASS 2 (DC Main Deck S5) 3B (80642) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

256

5130-00-190-6442

HAMMER, PNEUMATIC, PORTABLE, SCALING, TYPE 1, STYLE A (Machine Shop, AMS2) 5130-00-190-6442 (79852)

128

EA

257

5120-00-240-3096

HAMMER-BRUSH, WELDERS CHISEL HEAD W/ 2 EXTRA BRUSHES, TYPE 4 STYLE D (DC Vidmar DC) 1329-0280 (741)

128

EA

258

4240-00-022-2522

HARNESS, SAFETY, INDUSTRIAL (Bosun's Locker) 502644 (55799)

128

EA

0163-194

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 259 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4940-01-316-1133 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) HEAT GUN, ELECTRIC (Machine Shop, AMS2) VT-750C (83284) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

260

8415-01-271-8069

HELMET, FIREMEN'S (DC Locker and Vestibule) LFH3712 A-41 (68219)

128

EA

261

4210-00-935-3136

HELMET, SAFETY, CONSTRUCTION, ORANGE (Bosuns Store Room S25) ISEA/ANSI Z89.1 (80204)

128

BX

0163-195

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 262 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4210-00-935-3139 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) HELMET, SAFETY, CONSTRUCTION, WHITE (Bosuns Store Room S25) ISEA/ANSI Z89.1 (80204) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 6

U/I EA

263

4210-00-540-0623

HELMET, WELDERS (Machine Shop) 4240-00-540-0623 (81348)

128

EA

264

3950-00-965-0096

HOIST, CHAIN, HAND OPERATED SPNSN 2 TON CAPACITY, CLASS 2, TYPE C (Tool Cage EOS A4) MILH904 (81349)

128

EA

0163-196

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 265 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 3940-00-150-7108 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) HOIST, WIRE ROPE, HAND 3/4 TON 10 FT (Towing Gear Locker) 3000-30M (93601) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

266

3950-00-235-4235

HOIST, CHAIN (Machine Shop, AMS2) MILH904CLASS1TYPEHST YLE1 (81349)

128

EA

267

5210-00-390-5446

HOLDER, DIAL, TEST INDICATOR (Machine Shop CAB C) 200M (96168)

128

EA

0163-197

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 268 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5210-00-138-5333 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) HOLDER, DIAL, INDICATOR, MAGNETIC (Machine ShopD9) 657T (57163) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

269

5120-01-242-8167

HOLDER, WIRE 8243220

128

EA

270

5120-01-274-4238

HOLDING FIXTURE 9534635 (72915)

128

EA

0163-198

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 271 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8415-01-268-3473 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) HOOD, ANTIFLASH (DC Locker and Vestibule) 8415-01-268-3473 (64067) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 18

U/I EA

272

2040-00-268-9250

HOOK, BOAT, 10' (Bosun's Store Room) H389 (21530)

128

EA

273

4720-00-277-7225

HOSE ASSEMBLY, AIR DUCT, (Machine Shop) 607819 (80064)

128

EA

274

4210-00-776-0657

HOSE ASSEMBLY, NONMETALLIC (Bosun's Store Room) A-A-59566AA1020240 (58536)

128

EA

0163-199

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 275 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4210-00-725-9234 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) HOSE ASSEMBLY, NONMETALLIC (Bosun's Store Room) 592223 (1UVT5) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

276

4210-01-248-8822

HOSE ASSEMBLY, NONMETALLIC (Fan Room Main Deck) M244606-150-50 (81349)

128

EA

277

4720-00-293-7874

HOSE ASSEMBLY, NONMETALLIC, SERVICE, AIR, RUBBER WRAPPED, 112" CLASS 1 (Machine Shop) A-A-59565 (81348)

128

EA

278

4210-00-595-1838

HOSE ASSEMBLY, NONMETALLIC, WATER 3/4 ID 50' LG (Bosun's Store Room) 5100-185 (04024)

128

LG

0163-200

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 279 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4210-01-131-0247 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) HOSE ASSEMBLY, NONMETALLIC, FIRE FIGHTING (Fan Room) M24606-250 (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

280

4210-01-273-4727

HOSE ASSEMBLY, NONMETALLIC, FIRE FIGHTING (Fan Room) M24606-250-18 (81349)

128

EA

281

4210-00-078-9170

HOSE ASSEMBLY, NONMETALLIC, FIRE FIGHTING, ORANGE, 1-1/2 INCHES X 50 FT (Fire Stations) AA592263B1.5050 (58536)

128

EA

13

282

4210-01-220-6648

HOSE ASSEMBLY, NONMETALLIC, 4 IN, TYPE 1, CLASS B, SZ 4 (Bosun's Locker) M24606-400-50 (81349)

128

EA

0163-201

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 283 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4210-01-131-0247 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) HOSE ASSEMBLY, NONMETALLIC, FIRE FIGHTING (2 1/2 X 50) MS24606-250 (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

284

4320-01-529-4564

HOSE, DISPENSING PUMP (DC Locker) 4257K21 (39428)

128

EA

285

4220-01-493-9233

HYDROSTATIC RELEASE UNIT (Life Rafts 02 Level) DK84.1-M (02NT5)

128

EA

286

5210-00-277-8840

INDICATOR DIAL, 1-1/2" DIA, 0-100 MUSHROOM (Machine Shop CAB C) 196A (57163)

128

EA

0163-202

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 287 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5210-00-377-6525 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) INDICATOR DIAL, 2-3/16", DIA 0-50-0, REGULAR C (Machine Shop CAB C) 399A (37163) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

288

5210-00-314-6140

INDICATOR, DIAL 8T-5096 (11083)

128

EA

289

4910-01-332-6932

INDICATOR, PISTON 2850910 (11083)

128

EA

290

4940-01-268-2200

INDICATOR, POINT SET, GROUP 9U7400 (11083)

128

EA

0163-203

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 291 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-01-276-5953 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) INSTALLATION TOOL, RETAINING RING 9333846 (72915) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

292

5210-00-465-6052

INSTALLER, IMPELLER 8052959 (55380)

128

EA

293

7280-00-663-7300

IRONING BOARD 16 IN X 54 IN (Laundry Room) 53-6041 (97158)

128

EA

294

5120-00-176-8636

JACK, GOVERNOR INJECTOR 8432485 (72915)

128

EA

0163-204

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 295 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-224-7330 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) JACK, HYDRAULIC, HAND (Workshop, AMS2) 5029209-111-101 (99696) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

296

8415-00-268-8263

JACKET, WELDER'S (Machine Shop CAB A) A-A-55098 (SZ38) (58536)

128

EA

297

5120-00-935-4641

KEY SET, SOCKET HEAD SCREW, 20 PIECE, TYPE 1, CLASS 1 (Cleaning LKR Main Deck) 88028 (IJU00)

128

SE

298

8460-00-606-8366

KIT BAG, FLYER'S (DC Locker) 8460-00-606-8366 (83421)

128

EA

0163-205

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 299 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6680-00-928-4974 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) KIT, METER, AIR VELOCITY WINDMETER (85274) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

300

7340-00-197-1271

KNIFE, BONING 6" CARBON STEEL BLADE (Galley) 805-6 (23116) KNIFE, PARING, 3-1/2" HICARBON BLADE (Galley) AA-2733 (58536)

128

EA

301

7340-00-488-7939

128

EA

302

7340-00-406-6531

KNIFE, SLICING, 12" CORROSION RESISTANT (Galley) A-A-2733 (58536) KNIFE, STEAK, SCIMITAR 10 LG (Galley) A-A-2733 (58536)

128

EA

303

7340-00-197-1274

128

EA

304

7340-00-060-6057

KNIFE, TABLE, CRESCENT (Galley) 7340-00-060-6057 (80244)

128

BX

0163-206

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 305 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5440-00-221-0346 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) LADDER, EXTENSION, WOOD (Machine Shop D5 (3EA) LEL-20 (45826) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

306

2090-00-242-2511

LADDER, JACOBS (Bosuns Store Room) 804-5959234-15FT (53711)

128

EA

307

5440-00-514-4485

LADDER, STEP, ALUMINUM, 6 FT, TYPE 1 (AMS2) ANSI A14.2 (80204)

128

EA

0163-207

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 308 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7330-00-685-5330 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) LADLE, KITCHEN, 12 OZ (Galley) 7330-00-685-5330 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

309

7330-00-254-4793

LADLE, KITCHEN, 2 OZ (Galley) 7330-00-254-4793 (80244)

128

EA

310

7330-00-680-0865

LADLE, KITCHEN, 4 OZ (Galley) 7330-00-680-0865 (80244)

128

EA

311

7330-00-248-1153

LADLE, KITCHEN, 8 OZ STAINLESS STEEL, W/O POURING UP (Galley) 7330-00-248-1153 (80244)

128

EA

0163-208

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 312 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6230-01-181-9893 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) LANTERN, MARINE (NAVIGATION LIGHT) (Fitted) FA-249 (28763) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 5

U/I EA

313

4240-00-022-2518

LANYARD, SAFETY HARN (Bosuns Store Room A16) 505002 (86809)

128

EA

314

4240-00-022-2521

LANYARD, SAFETY, SHOCK ABSORBING (Towing Gear Locker) 400ABN (8Z172)

128

EA

315

5210-01-124-1798

LEG CRANK, PULLEY 5F7369 (11083)

128

EA

0163-209

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 316 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-01-365-5327 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) LEVER ASSEMBLY FT1322 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

317

4220-01-485-1135

LIFE PRESERVER, VEST W/ COLLAR, ORANGE (Fan Room Main Deck) MODEL 600-ORG-NAV (63806)

128

EA

30

318

4220-01-415-9817

LIFE PRESERVER, VEST (Bosuns Store Room S5) IWV-222 (63806)

128

EA

12

319

5120-00-176-8614

LIFTING FIXTURE, POWER ASSEMBLY 8417858 (72915)

128

EA

0163-210

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 320 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6230-01-143-4778 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) LIGHT, MARKER, DISTRESS (Pyrotechnics Locker) SN-TD (63607) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 12

U/I EA

321

5850-00-501-1455

LIGHT, SIGNAL (Arms Room) MIL24282 (81349)

128

EA

322

6260-01-086-8077

LIGHT, SURVIVAL, PERSONNEL, CHEMILUMINSCENE (Stored in Staterooms) 8-50101N (OBY83)

128

BX

323

1095-00-270-6019

LINE THROWING DEVICE (Small Arms Locker) CG 85 (85097)

128

SE

0163-211

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 324 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4940-01-268-2201 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) LINK BRACKET 1387573 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

325

4010-00-106-9468

LINK, CHAIN, DETACHABLE HIGH STRENGTH, W/HAIR PIN, USN BUSHIP PLAN 2 12603-921790 MIL-L-2710A (Tool Cage EOS A4) S2603-921790SZ1 1-2WHAIRPIN (80064)

128

EA

326

4010-00-106-9472

LINK, CHAIR, DETACHABLE HIGH STRENGTH, W/HAIR PIN, USN BUSHIP PLAN 52603-921790, MIL-L-2710A (Towing Gear Locker) S2603-860062SZ1 WHAIRPIN (80064)

128

EA

327

6530-01-380-7309

LITTER, RIGID, STOKES (DC Locker) 100047 (4A777)

128

EA

0163-212

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 328 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 1680-01-226-5300 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) LITTER, SLING, RESCUE, HELO (DC Locker) 190 (64249) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

329

2090-00-243-2362

LOCKER, SAFE, NO. 7 (Staterooms) S3209-860212 TYPE 7 (63538)

128

EA

330

5120-01-530-8720

LOCKNUT TOOL, BEARING (Machine Shop, AMS2) 903090 (07524)

128

EA

331

4930-00-223-3389

LUBRICATING GUN, HAND (Machine Shop) 7584 (0FKM1)

128

EA

0163-213

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 332 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4930-00-253-2478 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) LUBRICATING GUN, HAND, 14 OX (Tool Cage EOSA1) 11412 (1PL57) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

333

3460-01-529-6300

MANDREL, EXPANSION (Machine Shop) 2513900 (63600)

128

EA

334

1370-01-074-0591

MARKER, LOCATION MARINE MK 58 MODI BOBIE 1370-L580 (DC Locker) 3139741 (10001)

128

EA

335

4020-00-240-2185

MARLINE, HEMP TYPE 4, CLASS 1, 20 LBS COIL (Bosun's Locker) T-R-650 TY CL 1 (81348)

128

CL

0163-214

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 336 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-221-2731 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) MARLINESPIKE, 8", WIRE ROPE TYPE, W/EYE, TYPE 1 (Machine Shop D9) 5120-00-221-2731 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

337

5120-00-224-9443

MARLINSPIKE, 14", PLAIN, WIRE ROPE TYPE, W/EYE (Machine Shop D9) 5120-00-224-9443 (80244)

128

EA

338

7330-00-205-3093

MASHER, POTATO, HAND (Galley) 7330-00-205-3093 (80244)

128

EA

339

7220-00-267-4630

MATTING, FLOOR, SAFETY RUBBER OR VINYL, BLUE, NONSLIP (On Station) MIL-DTL-15562 (81349)

128

RO

0163-215

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 340 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7210-01-498-0282 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) MATTRESS, BED (NAVSEA 051 PD) (Linen Locker) 4-02 (81337) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 22

U/I EA

341

7240-00-255-8113

MEASURE, LIQUID W/ FLEXIBLE SPOUT, 2 QT (Machine Shop CAB A) LX-1532 (1LN28)

128

EA

342

7240-00-233-6013

MEASURE, LIQUID, FLEXIBLE SPOUT, 1 QT (Machine Shop CAB A) 4340T1 (39428)

128

EA

0163-216

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 343 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7240-00-255-5996 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) MEASURE, LIQUID, W/ FLEXIBLE SPOUT, 8 QT (Galley) 6110-002 (1JZ80) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

344

7240-00-233-6025

MEASURE, LIQUID, RIGID SPOUT, 4 QT (Machine Shop CAB A) 4340T45 (39428)

128

EA

345

7330-00-272-7876

MEASURING SET, SPOON CRES (4 SPOONS) (Galley) 7330-00-272-7876 (80244)

128

EA

346

8465-00-238-3344

MEGAPHONE, HAND, 18" (Pilothouse) MIL-M-1263 (81349)

128

EA

0163-217

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 347 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4820-01-474-4705 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) METER CALIBRATION KIT, MODEL RP (DC Locker) 467895 (55799) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

348

5120-00-278-9926

MIRROR, INSPECTION, RECTANGULAR GLASS 1-3/4" X 2-5/8", 18: OVERALL LENGTH, PLUNGER ACTUATED ANGLE ADJUSTMENT, TYPE 1, CLASS 3, SIZE 2 (Machine Shop) PO2120-00-278-9926 (80244)

128

EA

349

5120-00-278-8484

MIRROR, INSPECTION, RECTANGULAR GLASS 1-1/4" X 1-1/2" 11" OVERALL LENGTH, TYPE 2, CLASS 3 (Machine Shop D9)

128

EA

0163-218

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 350 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7920-00-579-8484 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) MOPPING OUTFIT, 16 QT (Cleaning Locker) 7920-00-579-8484 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I OT

351

6625-01-265-6000

MULTIMETER FLUKE-2711/FM (89536)

128

EA

352

5180-00-935-4642

MULTIPLIER KIT, TORQUE WRENCH (Machine Shop) 9551713 (72915)

128

EA

353

4730-00-196-2014

NIPPLE, PIPE (Machine Shop) B687R-108B (81346)

128

EA

0163-219

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 354 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4210-01-042-0408 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) NOZZLE, FIREHOSE 1.5 (Fire Stations) 20690002 (00912) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 11

U/I EA

355

2910-01-250-1608

NOZZLE PULLER GROUP 6V6980 (11083)

128

EA

356

5310-00-076-1504

NUT, PLAIN, HEXAGON 1B4207 (11083)

128

EA

357

6625-01-223-2980

OHMMETER, 0-1000 MEG OHMS RESISTANCE (Fitted) 212159 (07239)

128

EA

0163-220

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 358 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4930-00-266-9182 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) OILER, HAND, 8 OZ (Machine Shop D12) 212159 (07239) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

359

4930-00-262-8868

OILER, HAND, FLEX SPOUT, 1 PT (Paint Locker Main Deck) A50477-A5-DD 58536

128

EA

360

7330-00-272-2590

OPENER, CAN, ELECTRIC PORTABLE (Galley) 201 (83190)

128

EA

0163-221

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 361 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7330-00-205-3151 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) OPENER, CAN, MANUAL, TABLE MOUNTED, TYPE 3, GRADE A (Galley) AA52206-3A (58536) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

362

7240-00-160-0455

PAIL, UTILITY, METAL, HEAVY WEIGHT 3-1/2 GA (Fan Room Main Deck) 514 (9C665)

EA

363

7330-00-205-3166

PAN, BAKING AND ROASTING 18" X 12" X 2-1/2" (Galley) 7330-00-205-3166 (80244)

128

EA

364

7330-00-680-2763

PAN, BAKING AND ROASTING 24" X 12" X 3" (Galley) 7330-00-680-2763 (80244)

128

EA

0163-222

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 365 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7330-00-286-8069 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PAN, BAKING AND ROASTING 24" X 18" X 41/2" (Galley) C36793B (95027) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

366

7330-00-205-3164

PAN, BAKING AND ROASTING, 13-1/4 " X 9-1/4" X 2-1/4" (Galley) 7330-00-205-3164 (80244)

128

EA

367

7330-00-633-8905

PAN, BAKING SHEET (Galley) 7330-00-633-8905 (80244)

128

EA

368

7330-00-255-5995

PAN, BREAD, FOUR-PAN SET (Galley) 7330-00-255-5995 (80244)

128

SE

369

7330-00-205-3150

PAN, CAKE, ROUND, 12 PER BOX, 9" X 1-1/2 DEEP (Galley) 7330-00-205-3150 (80244)

128

BX

0163-223

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 370 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7330-01-278-8264 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PAN, FRYING 12" DIA (Galley) EW-3030 (32893) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

371

7330-01-278-8265

PAN, FRYING 6" DIA (Galley) 7330-01-278-8265 (80244)

128

EA

372

7330-00-244-4549

PAN, MUFFIN, 12 CUP ALUMINIUM HEAVY DUTY (Galley) 7330-00-244-4549 (80244)

128

EA

373

7330-00-823-6883

PAN, PIE, ALUMINIUM 9" STYLE A (Galley) 7330-00-823-6883 (80244)

128

DZ

374

6675-00-191-1507

PARALLEL RULER (Pilothouse) A-A-50212A (00MDK)

128

EA

0163-224

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 375 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6675-00-191-1509 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PARALLEL RULER (Pilothouse) GG-P-118 (81348) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

376

7330-00-238-8316

PEELER, POTATO, HAND (Galley) W8079 (85812)

128

DZ

377

8345-00-935-0538

PENNANT, SIGNAL, ANSWER 2ND REPEATER INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0538 (83421)

128

EA

378

8345-00-935-0504

PENNANT, SIGNAL, "0" NUMERIC INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0504 (83421)

128

EA

379

8345-00-935-0496

PENNANT, SIGNAL, "1" NUMERIC INTN'L CODE, SIZE 8 (Pilothouse) MIL-F-2692 (81349)

128

EA

0163-225

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 380 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8345-00-926-6022 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PENNANT, SIGNAL, "2" NUMERIC INTN'L CODE, SIZE 8 (Pilothouse) MIL-F-2692 (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

381

8345-00-935-0497

PENNANT, SIGNAL, "3" NUMERIC INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0497 (83421)

128

EA

382

8345-00-935-0498

PENNANT, SIGNAL, "4" NUMERIC INTN'L CODE, SIZE 8 (Pilothouse) MIL-F-2692 (81349)

128

EA

383

8345-00-935-0499

PENNANT, SIGNAL "5" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0499 (83421)

128

EA

384

8345-00-935-0500

PENNANT, SIGNAL, "6" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0500 (83421)

128

EA

0163-226

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 385 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8345-00-935-0501 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PENNANT, SIGNAL "7" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0501 (83421) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

386

8345-00-935-0502

PENNANT, SIGNAL, "8" NUMERIC INTN'L CODE, SIZE 8 (Pilothouse) MIL-F-2692 (81349)

128

EA

387

8345-00-935-0503

PENNANT, SIGNAL, "9" INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0503 (83421)

128

EA

388

8345-00-935-0537

PENNANT, SIGNAL, ANSWER 1ST REPEATER INTN'L CODE, SIZE 8, (Pilothouse) 8345-00-935-0537 (83421)

128

EA

389

8345-00-935-0540

PENNANT, SIGNAL, ANSWER 3RD REPEATER INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0540 (83421)

128

EA

0163-227

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 390 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8345-00-935-0534 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PENNANT, SIGNAL, ANSWER INTN'L CODE, SIZE 8 (Pilothouse) 8345-00-935-0534 (83421) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

391

5980-01-134-2068

PHOTO-CELL (FOR NAVIGATION LIGHT, TOWING) (Bosun's Locker) 9001 0317 (28763)

128

EA

392

7210-00-205-3205

PILLOW, BED, TYPE 1, SIZE 3 (Fitted) 7210-00-205-3205 (83421)

128

EA

25

393

5315-01-268-2194

PIN, TIMING 6V4186 (11083)

128

EA

0163-228

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 394 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5315-01-285-3476 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PIN, SHOULDER, HEADLESS (TIMING) (Machine Shop) 3P1544 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

395

3020-01-250-1610

PINION TURNING TOOL 959082 (11083)

128

EA

396

7210-00-231-2373

PILLOWCASE (Linen Locker) 7210-00-231-2373 (83421)

128

EA

50

397

7350-00-195-4763

PITCHER, SYRUP, GLASS, 14 OZ BODY CHROME TOP (Galley) 7350-00-195-4763 (80244)

128

EA

0163-229

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 398 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7350-00-249-5165 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PITCHER, WATER, 2 QT STAINLESS STEEL (Galley) 7350-00-249-5165 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 4

U/I EA

399

7350-01-256-1087

PLATE, EATING (Galley) 7350-01-256-1087 (80244)

128

BX

400

2540-01-268-2217

PLATE, MOUNTING GROMMET 3H465 (11083)

128

EA

401

2040-01-151-1683

PLATE, SHACKLE PER US ARMY DWG (Fitted) 13226E2127 (97403)

128

EA

19

0163-230

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 402 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-239-8251 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PLIERS (Machine Shop D1) 201 (75347) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

403

5120-00-943-9929

PLIERS, BATTERY (Machine Shop D8) 20 (70786)

128

EA

404

5510-00-260-8953

PLUG, WOOD, SOFT (Bow Thruster Port Floor) 5184291 PC 14 (53711)

128

EA

20

405

5510-00-260-8953

PLUG, WOOD, SOFT (1") (Bow Thruster Port Floor) 803-5184291 (53711)

128

EA

20

0163-231

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 406 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5510-00-260-8962 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PLUG, WOOD, SOFT, 3" X 0" X 8" (DC Main Deck S14) 5184291PC19 53711 (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 20

U/I EA

407

5510-00-260-8966

PLUG, WOOD, SOFT, 5" X 3" X 10" (DC Main Deck S14) 5184291 53711

128

EA

20

408

5510-00-260-8969

PLUG, WOOD, SOFT, 7" X 3" X 10" (DC Main Deck S14) 803-461043 80064

128

EA

20

0163-232

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 409 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5510-00-260-8973 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PLUG, WOOD, SOFT, 8" X 4" X 10" (DC Main Deck S14) 5184291 (53711) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 10

U/I EA

410

5510-00-260-8949

PLUG, WOOD, SOFT 10" X 12" (Towing Gear Locker) S8800-461043 80064

128

EA

20

411

7910-00-224-7985

POLISHER, FLOOR, ELECTRICAL W/5 BRUSHES (Cleaning Locke) A-A-50478 (58536)

128

EA

0163-233

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 412 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7910-00-680-8296 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) POLISHER, FLOOR, ELECTRICAL (Cleaning Locker) A-A-50478 (58536) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

413

7330-00-205-4146

POT, COOKING, W/COVER, 14 QT (Galley) 7330-00-205-4146 (80244)

128

EA

414

3444-00-223-8359

PRESS, ARBOR, HAND OPERATED A59174-1F9 (58536)

128

EA

0163-234

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 415 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4940-00-360-2752 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PRESS, HYDRAULIC, PORTABLE (Machine Shop) S71 (07505) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

416

5120-01-348-6742

PRESSURE PIECE (Towing Gear Locker) 2125-9806-000 (80871)

128

EA

417

4910-00-366-1500

PROTECTOR, CRAB STUD 8034600 (72815)

128

EA

418

6675-00-183-6485

PROTRACTOR, SEMICIRCULAR 6" (Pilothouse) GGP681 (81348)

128

EA

0163-235

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 419 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6675-00-191-1514 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PROTRACTOR, THREE ARM (Pilothouse) A-A-59478 TY CL 1 (58536) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

420

6675-00-191-1516

PROTRACTOR, THREE ARM (Pilothouse) A-A-59478 TY 1 CL 2 (58536)

128

EA

421

5120-01-363-9052

PROTECTOR, SHAFT (Machine Shop) 600465-000 (96151)

128

EA

0163-236

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 422 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6685-00-865-1485 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PSYCHROMETER 1328 (9X670) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

423

6685-00-826-1662

PSYCHROMETER, TYPE 5 (Pilothouse) U430 (48620)

128

EA

424

5120-01-124-1727

PULLER ASSEMBLY 1P2320 (11083)

128

EA

425

5120-01-128-0725

PULLER GROUP 8S2264 (11083)

128

EA

0163-237

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 426 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-01-483-8583 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PULLER, HYDRAULIC 1P820 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

427

5120-00-998-7663

PULLER, IMPELLER 8354367 (72915)

128

EA

428

5210-01-186-1044

PULLER, MECHANICAL 1177 (45225)

128

EA

429

5120-01-295-1374

PULLER, MECHANICAL 6V2166 (11083)

128

EA

0163-238

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 430 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-366-1446 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PULLER, MECHANICAL 8116358 (72915) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

431

5210-00-589-1446

PULLER, MECHANICAL 1P-2321 (11083)

128

EA

432

5120-00-633-5085

PULLER, MECHANICAL 8B-7548 (11083)

128

EA

433

5120-01-349-2706

PULLER, MECHANICAL (Machine Shop) 812-977-001 (51729)

128

EA

0163-239

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 434 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-288-7710 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PULLER, MECHANICAL (Machine Shop D8) GGG-P-781 (81348) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

435

5120-00-595-9304

PULLER, MECHANICAL DOUBLE-END GRIP TWO JAW, EXTERNAL, 6" SPREAD, 3-REACH (Machine Shop) 1024 (45225)

128

EA

436

5120-00-595-9305

PULLER, MECHANICAL, DOUBLE-END GRIP TWO JAW, EXTERNAL, 8" SPREAD, STYLE B SIZE 2 (Machine Shop)

128

EA

0163-240

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 437 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-215-1880 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PULLER, MECHANICAL, GEAR & BEARING (Machine Shop) 1005 (45225) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

438

5120-00-288-7711

PULLER, MECHANICAL, SINGLE END GRIP TWO JAW, EXTERNAL, 0" TO 12" SPREAD (Machine Shop Cab C) PD5120-00-293-2925 (80244)

128

EA

439

4930-00-263-9886

PUMP, DISPENSING, HAND DRIVEN 20 GAL (76 L) PER 100 STROKES 43D15069 (80049)

128

EA

0163-241

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 440 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4320-00-374-1403 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PUMP, HYDRAULIC RAM 4C4865 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

441

4930-00-158-9379

PUMP, LUBRICANT TRANSFER 14388 (07295)

128

EA

442

4320-01-387-2869

PUMP UNIT, CENTRIFUGAL (P-100) (Fan Room, Port Side, Main and 01 Deck) 2BE10YDN (15852)

128

EA

443

4320-00-986-7312

PUMP UNIT, CENTRIFUGAL (Fan Room) 11810-0003 (31425)

128

EA

0163-242

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 444 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4320-00-368-3186 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) PUMP UNIT, CENTRIFUGAL (DC Locker) 576139 (83590) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

445

4320-01-263-9716

PUMPING UNIT, HYDRAULIC 5P4150 (11083)

128

EA

446

5110-00-449-7313

PUNCH SET, CUTTING, DOUBLE BOW, (Machine Shop) P79-GS (95021)

128

SE

447

5120-00-883-3003

PUNCH SET, DRIVE, PIN, SET OF 9 SIZES 1-9, TYPE 8, CLASS A, STYLE 1 (Tool Cage EOS B3) 2136 (63704)

128

SE

0163-243

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 448 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-01-350-5902 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) RACK ADJUSTING TOOL 8T-9173 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

449

4910-00-366-1465

RACK, INJECTOR HOLDER 8431626 (72915)

128

EA

450

2040-01-137-2019

RACK, STOWAGE, ONE HOLE (Fitted, Staterooms) 515-SK-8141 ONE HOLE (53711)

128

EA

27

451

5120-01-345-5332

RACK POSITION, TOOL GROUP 95-0228 (11083)

128

EA

0163-244

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 452 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2040-00-288-2866 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) RATGUARD, SHIP (Bosun's Locker) MILG2767 (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 6

U/I EA

453

5110-01-336-8686

REAMER, HAND 6V4089 (11083)

128

EA

454

4210-01-081-0419

REDUCER, HOSE (Bosuns Store Room S20) 5100-190 (04024)

128

EA

455

6650-00-105-1418

REFRACTOMETER (TESTER, OPTICAL & ANTIFREEZE, BATTERY SOLUTION) (Machine Shop CAB C) 137584L0 (3N5H5)

128

EA

0163-245

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 456 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5210-00-366-1472 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) REMOVER, CYLINDER HEAD 8075894 (72915) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

457

5120-01-530-7892

REMOVER, PREFORMED PACKING 45001225CO (1BZ02)

128

EA

458

5120-01-531-5529

REMOVER, PREFORMED PACKING 45001205CO (1BZ02)

128

EA

459

4730-01-414-6976

REPAIR KIT, PIPE, EMERGENCY DAMAGE CONTROL (DC Locker) BV-USA-2 (01CL4)

128

KT

0163-246

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 460 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4730-00-542-3362 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) REPAIR KIT, PIPE, EMERGENCY DAMAGE CONTROL (DC Locker) MIL-R-17882KIT2 (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 6

U/I KT

461

5120-00-850-6313

RETRIEVING TOOL, MAGNETIC, FLEXIBLE, INSULATED, 33" LONG, TYPE 2, CLASS 2, STYLE B (Machine Shop Cab C) 5120-00-850-6313 (80244)

128

EA

462

5120-00-545-4268

RETRIEVING TOOL, MAGNETIC, TELESCOPE, 26" TO 27-1/2" MAX LG., TYPE 2, CLASS 1 (Machine Shop) 5120-00-545-4268 (80244)

128

EA

0163-247

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 463 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4220-00-275-3157 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) RING BUOY, LIFESAVING 30 INCHES OD (Life Jacket Locker) SUBPART 160.050-30IN. (81340) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 8

U/I EA

464

4020-00-530-0698

RING, RETRIEVING LINE, 1 INCHES CIRCLE, ORANGE POLYPROPYLENE (Bosun's Locker) MILR24049 (81349)

128

RL

465

5120-01-289-4310

RIVETER, BLIND, HAND (Machine Shop) 5120-01-289-4310 (80204)

128

EA

466

5120-00-176-8616

ROD, PISTON HOLDING 8417859 (72915)

128

EA

0163-248

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 467 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7330-00-153-9749 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) ROLLING PIN (Galley) 7330-00-153-9749 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

468

4020-00-519-7960

ROPE, FIBROUS, NYLON, 10 CIRC (Bosun's Locker) MIL-DTL-24050E (81349)

128

RL

469

4020-00-289-8616

ROPE, FIBROUS (Bosun's Locker) T-R-605 (81348)

128

CL

470

4020-00-710-2074

ROPE, FIBROUS (Bosun's Locker) Lanyard, Distress Marker 1/4 Dia.

128

CL

0163-249

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 471 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4020-00-106-9411 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) ROPE, FIBROUS, NYLON, 6" CIRC (Bosun's Locker) MILR24050-6INN0MCIRCM (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I RL

472

4020-01-025-5179

ROPE, FIBROUS, MYLON, 8" CIRC (Bosun's Locker) MIL-R-24050 1200 FT (81349)

128

RL

473

5330-00-729-5103

RUBBER SHEET, SOLID 1/8" TYPE 1, CLASS 1 (Machine Shop, AMS2) A-A-1719 (58536)

128

EA

474

5330-00-641-3051

RUBBER SHEET, SOLID 1/16" TYPE 1, CLASS 1 (Machine Shop, AMS2) MIL-PRF-1149D (81349)

128

EA

475

5210-00-501-6280

RULE, MULTIPLE FOLD, STEEL, 6' EXTENDED (Machine Shop CAB C) 7072 (08871)

128

EA

0163-250

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 476 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7350-00-240-7069 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SALT SHAKER (Galley) 7350-00-240-7069 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

477

7350-00-680-2630

SALT SHAKER (Galley) 7350-00-680-2630 (80244)

128

EA

10

478

4720-01-529-5830

SAMPLING LINE (DC Locker) 497335 (8F723)

128

EA

0163-251

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 479 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6665-01-429-8592 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SAMPLING PUMP (DC Main Deck DE) 487500 (55799) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

480

5130-00-596-9728

SANDER, DISK, ELECTRIC, PORTABLE (Machine Shop D11) 5130-00-596-9728 (80244)

128

EA

481

5130-00-340-0719

SANDER, DISK, PNEUMATIC, PORTABLE (Machine Shop) 5130-00-340-0719(80244)

128

EA

482

7330-00-240-2134

SAUCEPAN, W/COVER, 2 QT SIZE 1 (Galley) 7330-00-240-2134 (80244)

128

EA

0163-252

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 483 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7330-00-240-2137 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SAUCEPAN, W/COVER, 7-1/2 QT SIZE 3 (Galley) 7330-00-240-2137 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

484

5130-00-343-8945

SAW, CIRCULAR, PNEUMATIC, PORTABLE, WITH 6 BLADES, 3 EA 44 TEETH & 3 EA 60 TEETH (DC Main Deck S8) 7468E (3X189)

128

EA

485

5130-00-089-3353

SAW, CIRCULAR, PORTABLE 115V, AC/DC, TYPE 1, SIZE 7 (Machine Shop) 5130-00-089-3353 (80244)

128

EA

486

5130-00-889-7745

SAW, ELECTRIC, RECIPROCATING, 115 AC (DC Main Deck S8) 5130-00-889-7745 (80244)

128

EA

487

6670-01-010-5906

SCALE, WEIGHING (0-60 LBS CAPACITY) (Machine Shop) 1N-060 (92456)

128

EA

0163-253

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 488 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6670-01-432-0062 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SCALE, WEIGHING, BAKERS, 8 LB CAP (Galley) 1002TB (17087) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

489

5130-00-965-9876

SCALER, PNEUMATIC, PORTABLE, NEEDLE TYPE (DC Main Deck DD) 5130-00-965-9876(80244)

128

EA

490

5130-00-757-4920

SCALER, PNEUMATIC, NEEDLE SET (Machine Shop) NS-11-22-19(4P412)

128

SE

491

7330-00-680-2636

SCRAPER, BAKER'S, RUBBER BLADE, WOOD HANDLE (Galley) 7330-00-680-2636 (80244)

128

DZ

492

5110-00-240-3094

SCRAPER, SHIP, ALL METAL, 15" LONG ANGLEBENT END, TYPE 1, CLASS A (Paint Locker Main Deck) PD5110-00-240-3094 (80244)

128

EA

0163-254

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 493 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5305-01-360-5972 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SCREW, CAP, HEXAGON HEAD 24 X 2 X 60 00A-1273-150 (80871) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

494

7330-00-153-9760

SCOOP, KITCHEN, STAINLESS STEEL 7 - 7-1/8" X 5-1/4" (Galley) 7330-00-153-9760 (80244)

128

EA

495

4240-01-545-9605

SELF-CONTAINED BREATHING APPARATUS (SCBA) (SCBA Cabinet, DC Locker and Vestibule) 804861-3802 (15927)

128

EA

SCOTT

496

6605-01-253-3442

SEXTANT, MARINE (Bosuns Store Room) A-A-59005 (58536)

128

EA

0163-255

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 497 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4030-01-529-5144 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SHACKLE, ANCHOR W/ SCREW PIN, 1-3/8" 1 1/2" PIN DIA (Bosun's Locker) 3558T57 (39428) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 10

U/I EA

498

4030-00-282-4885

SHACKLE, ANCHOR, W/ SCREW PIN, 5/16 IN, 3/8 IN PIN DIA (Bosun's Locker) RRC-271DTYPEIVA,GRADEA, CLASS2 (81348)

128

EA

10

499

4030-01-099-2692

SHACKLE, ANCHOR, W/ SCREW PIN, 5/8" 3/4" PIN DIA (Bosun's Locker) 3558T51 (39428)

128

EA

10

0163-256

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 500 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4030-00-185-0490 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SHACKLE, ANCHOR, W/ SCREW PIN, 7/16" 1/2" PIN DIA (Bosun's Locker) 3559T47 (39428) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 10

U/I EA

501

4030-01-436-3755

SHACKLE, ANCHOR, W/ SCREW PIN, 3/16" X 1/4" (Bosun's Locker) 3558T44 (9L479)

128

EA

10

502

4030-01-529-5138

SHACKLE, CHAIN, W/ SCREW PIN, 1-3/4" 2" PIN DIA (Bosun's Locker) 3560T58 (39428)

128

EA

10

0163-257

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 503 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 8345-00-174-0453 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SHAPE, DAY, MARITIME, BALL, BLACK (Pilothouse) MIL-S-29108 (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

504

8345-01-101-1101

SHAPE, DAY, MARITIME, DIAMOND, BLACK, PER USOG RQMTS (Pilothouse) 16-1-440 (22571)

128

EA

505

7330-00-798-7356

SHARPENER, KNIFE, WALL MOUNTED, (Galley) 86MM177 (66715)

128

EA

0163-258

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 506 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7520-00-162-6178 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SHARPENER, PENCIL, MANUAL (On Station) 723898-554 (05869) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 5

U/I EA

507

5110-00-221-1087

SHEARS, METAL CTG, COMBINATION CUT, 12-1/2 IN OVERALL LENGTH, 2-3/4 IN TO 3-1/2 CUT, TYPE 2 CLASS 3 (Machine Shop Cab A) 160 (73046)

128

EA

508

5110-00-221-1083

SHEARS, METAL CTG, STRAIGHT CUT, 16, OVERALL LENGTH, 2-1/4" TO 3-1/2" CUT, TYPE 2, CLASS 1, STYLE A (Machine Shop D9) B107.16M (05047)

128

EA

509

5110-00-293-0089

SHEARS, METAL CUTTING, STR CUT, 2-1/2" TO 3-1/2" CUT, 12-1/2" OVERALL LENGTH, TYPE 2, CLASS 1, STYLE B (Machine Shop Cab C) 12 (70786)

128

EA

0163-259

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 510 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5110-00-161-6909 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SHEARS, STRAIGHT TRIMMERS, 9", 1 BEVEL/1 SHART PT. TYPE 1, CLASS 1, STYLE A DESIGN 2 (Machine Shop, AMS2) PD5110-00-161-6906 (80244) SHEET, BED, COTTON FLAT WHITE 66" X 102" (Linen Locker) 7210-01-119-6416 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

511

7210-01-119-6416

128

DZ

512

5120-01-363-8597

SHIFT SEAL INSTALLATION TOOL 600496-000 (96151)

513

2090-00-058-3737

SHORE, DAMAGE CONTROL (Bosun's Store Room) MIL-S-23965MODEL3-5 (81349)

128

EA

0163-260

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 514 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 2090-00-052-1581 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SHORE, DAMAGE CONTROL (Towing Gear Locker) MIL-S-23965 (81349) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 6

U/I EA

515

7330-00-184-0089

SIFTER, FLOUR 1-1/2 QT (Galley) 7330-00-184-0089 (80244)

128

BX

516

9905-01-462-6249

SIGN, "EXIT" LEFT ARROW (Fitted) 3MN118PL (76381)

128

PG

EXIT
517 9905-01-462-6247 SIGN, "EXIT" RIGHT ARROW (Fitted) 3MN119PL (76381) 128 PG 1

EXIT
0163-261
03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 518 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7690-01-462-6869 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SIGN, REFLECTIVE, "DAMAGE CONTROL LOCKER" (Fitted) 3MN036DG (76381) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I PG

DAMAGE CONTROL LOCKER


519 7690-01-462-6057

DANGER
DO NOT ENTER
GAS FREE PERMIT REQUIRED CONFINED SPACE

SIGN, REFLECTIVE, "DANGER, DO NOT ENTER, GAS FREE PERMIT REQUIRED, CONFINED SPACE" (Fitted) 3MN203DG (76381)

128

PK

520

7690-01-462-6288

SIGN, REFLECTIVE, "EEBD HORIZONTAL" (Fitted) 3MN109PL (76381)

128

PK

EEBD
521 7690-01-462-6300 SIGN, REFLECTIVE, "EEBD VERTICAL" (Fitted) 3MN107PL (76381) 128 PG 1

E E B D

0163-262

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 522 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7690-01-462-6078 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SIGN, REFLECTIVE, "ESCAPE SHUTTLE, DO NOT BLOCK" (Fitted) 3MN217DG (76381) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I PG

ESCAPE SHUTTLE

DO NOT BLOCK
523 7690-01-462-6269 SIGN, REFLECTIVE, "EXIT" (Fitted) 3MN113PL (76381) 128 PG 1

EXIT
524 7690-01-462-6617 SIGN, REFLECTIVE, "EXIT" DOUBLE ARROW (Fitted) 3MN120PL (76381) 128 PG 1

EXIT
525 1370-00-629-2336 SIGNAL, ILLUMINATION (DC Locker) 8797868 (19203) 128 EA 12

0163-263

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 526 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 1370-01-030-8330 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SIGNAL, SMOKE & ILLUMINATION, FOR RESCUE BOAT (DC Locker) DL3139734 (10001) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 6

U/I EA

527

8415-00-261-6437

SLEEVE, CAPE AND BIB, WELDER'S (Galley) A-A-55098 (58536)

128

EA

528

3940-01-183-9412

SLING, ENDLESS 1" X 6' (Machine Shop, AMS2) 3375957 (15434)

128

EA

529

3940-01-187-5870

SLING, ENDLESS, 4000 LB CAPACITY (Machine Shop, AMS2) 3375958 (15434)

128

EA

0163-264

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 530 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-01-113-8078 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SOCKET SET, SOCKET WRENCH, METRIC (Machine Shop D9) B107.5M (05047) SOCKET, SOCKET WRENCH 5P-0144 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I SE

531

5120-01-124-1773

532

3439-00-930-1638

SOLDERING GUN, ELECTRICAL, TRIGGER OPERATED (Machine Shop D12) 460 (11103)

128

EA

533

3439-01-443-3704

SOLDERING IRON, ELECTRIC 6' OCRD (Machine Shop, AMS2) SL325 (96508)

128

EA

534

7330-00-254-4791

SPATULA, STEEL, 8" SPRING-TEMPERED BLADE (Galley) A-A-2733 (58536)

128

EA

0163-265

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 535 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7330-00-684-8740 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SPATULA, STEEL 14 " BLADE (Galley) A-A-2733 (58536) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

536

3456-01-371-3727

SPEAR, TUBEPULLER 2986816 (3NN57)

537

7340-00-205-1421

SPOON, SLOTTED SERVICE, 15" LG (Galley) A-A-1082 (58536)

128

EA

538

7340-00-241-8171

SPOON, DESSERT, 7" LG, 24 TO A BOX (Galley) 7340-00-241-8171 (80244)

128

BX

0163-266

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 539 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7340-00-240-7080 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SPOON, FOOD SERVICE, 15" LG, TYPE 1 (Galley) A-A-1082 (58536) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 4

U/I EA

540

7340-00-223-7800

SPOON, FOOD SERVICE, 21" LG (Galley) A-A-52204 (58536)

128

EA

541

7340-00-205-3340

SPOON, ICED TEA, 24 TO A BOX, 6" LONG (Galley) 7340-00-205-3340 (80244)

128

BX

0163-267

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 542 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7340-00-235-5023 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SPOON, SOUP (Galley) 7340-00-235-5023 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I DZ

543

7340-00-205-3341

SPOON, TABLE, CRESCENT 24 TO A BOX (Galley) 7340-00-205-3341 (80244)

128

BX

544

6230-01-529-4558

SPOTLIGHT, RECHARGABLE, 2 MILLION CP (DC Locker) RC-3800 (1XRW6)

128

EA

545

7240-00-177-6154

SPOUT, CAN, FLEXIBLE (Fan Room Main Deck) 11677020 (19207)

128

EA

0163-268

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 546 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4940-00-294-9521 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) SPRAY OUTFIT, PAINT AIR (Paint Locker Main Deck) 0052927-01 (81348) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

547

3740-00-641-4719

SPRAYER, PESTICIDE (Bosun's Locker) 67332MS (29670)

128

EA

548

7920-00-577-4748

SQUEEGEE (Laundry Room) 7920-00-577-4748 (80244)

128

EA

0163-269

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 549 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7520-00-243-1780 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) STAPLER, PAPER FASTENING, HEAVY DUTY (Pilothouse) 13 (2809) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

550

4210-01-476-5024

STEAMBLOCK GLOVE (Bosun's Locker) 5229 SIZE/LARGE (1HT35)

128

PR

551

4210-01-476-5031

STEAMBLOCK GLOVE (Bosun's Locker) 5229 (SZ X-LARGE) (1HT35)

128

PR

552

4210-01-476-5017

STEAMBLOCK GLOVE (Bosun's Locker) 5229 SIZE-MEDIUM (1HT35)

128

PR

553

7520-00-298-7043

STENCIL SET, MARKING 1" IN BRASS INTERLOCKING LETTERS (DC Locker) 7520-00-298-7043 (83421)

128

SE

0163-270

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 554 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7520-00-298-7044 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) STENCIL SET, MARKING 2" BRASS INTERLOCKING LETTERS (DC Locker) 7520-00-298-7044 (83421) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I SE

555

7520-00-272-9683

STENCIL SET, MARKING 3" BRASS INTERLOCKING LETTERS (DC Locker) 7520-00-272-9683 (83421)

128

SE

556

7520-00-269-9012

STENCIL SET, MARKING 4" METAL LETTERS (DC Locker) 7520-00-269-9012 (83421)

128

SE

557

5210-00-473-6921

STEP PLATE, MECHANICAL 5120-00-473-6921 (80244)

128

EA

558

5345-00-190-5528

STONE, SHARPENING RECTANGULAR, 8" X 2" X 1", ALUMINUM OXIDE MEDIUM GRIT, TYPE 2, STYLE 1 (Machine Shop, AMS2) A69M0 (70752)

128

EA

0163-271

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 559 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6645-00-250-4680 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) STOPWATCH, 60 SECOND, DIAL, TYPE 1, CLASS 2 (DC Locker) 358 (81059) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

560

5307-00-207-4873

STUD, SHOULDERED AND STEPPED 8034054 (72915)

128

EA

561

4220-01-251-6466

SUIT, SURVIVAL, COLD (Bosuns Store Room S14) 1590ORG-24-000 (63806)

128

EA

30

0163-272

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 562 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6680-01-353-9776 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TACHOMETER, HAND (Pilothouse) DT-25 (89554) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

563

5210-00-234-6745

TAPE, MEASURING 50' STEEL GENERAL PURPOSE (Machine Shop CAB C) 5210-00-234-6745 (80244)

128

EA

564

5210-00-526-0752

TAPE, MEASURING, TANK LEVEL GAGE 50' LONG (Machine Shop CAB C) 14075 (37163)

128

EA

565

6630-00-074-0394

TEST KIT, CHROMATE (Bow Thruster STB S2) 0534Z86 (59728)

128

EA

0163-273

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 566 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4910-01-249-0151 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TESTER, DIESEL FUEL INJECTOR NOZZLE 9549055 (72915) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

567

6685-01-328-8051

THERMISTOR, GAGE, (INDICATOR, VACUUM) (Machine Shop, AMS2) 14830A (07295)

128

EA

568

6685-01-369-9700

THERMOCOUPLE CONTACT 6V9055 (11083)

128

EA

569

6685-00-444-6500

THERMOMETER, POCKET DIAL, BI METALLIC 0(Pilothouse) D4013-A (1DWR0)

128

EA

0163-274

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 570 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6685-01-462-5334 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) THERMOMETER, SELF INDICATING, HEATING (Galley) 5939 (OYZF7) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

571

4030-00-266-0066

THIMBLE, WIRE ROPE 1/2 (Bosun's Locker) FFT276 (81348)

128

EA

10

572

4030-00-270-8708

THIMBLE WIRE ROPE 5/8 (Bosun's Locker) G414 5-8 (75535)

128

EA

20

573

5180-00-357-7514

THREADING SET, PIPE, 1/8 TO 1 (Paint Locker Main Deck) 5180-00-357-7514 (80244)

128

KT

0163-275

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 574 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5136-00-555-8912 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) THREADING SET, PIPE, 1 TO 2 (Tool Cage EOS A3) 36585 (50893) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

575

5180-00-856-3471

THREADING SET, SCREW (Machine Shop) 5180-00-856-3471 (80244)

128

KT

576

5180-00-422-2362

THREADING SET, SCREW (Tool Cage EOS A1) GGG-T-330 (81348)

128

KT

577

5180-00-422-4975

THREADING SET, SCREW WITH CSE RH THREE (Tool Cage EOS A3) 5180-422-4975 (80244)

128

KT

578

5280-01-505-8509

TIMING INDICATOR 6V7926 (11083)

0163-276

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 579 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TM 10-4240-343-13&P, FIELD MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR SELF-CONTAINED BREATHING APPARATUS (SCBA) 45 MINUTE NSN 4240-01-545-9605 (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

580

TM 10-4310-503-13&P, FIELD MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR EMERGENECY BREATHING AIR COMPRESSOR/STAINLESS STEEL (E-BAC/SS), NSN 4310-01-541-4359 TM 11-5830-258-10, OPERATOR, UNIT, DIRECT SUPPOR, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR INTERCOMMUNICATION STATIONS, LS-518A/SIC (NSN 5830-01-018-1202) AND LS-519A/SIC (5830-01-020-6280) AND T INTERCOMUNICATION, TS-3990/SIC (NSN 6625-01-126-4886) TM 55-1925-208-24, FIELD AND SUSTAINMENT MAINTENANCE MANUAL FOR MAIN PROPULSION ENGINE INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG)

128

EA

581

128

EA

582

128

EA

0163-277

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 583 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TM 55-1925-208-24P, FIELD AND SUSTAINMENT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR MAIN PROPULSION ENGINE INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-209-24-1, FIELD AND SUSTAINMENT MAINTENANCE MANUAL FOR SHIP'S SERVICE GENERATOR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

584

128

EA

585

TM 55-1925-209-24-2, FIELD AND SUSTAINMENT MAINTENANCE MANUAL FOR SHIP'S SERVICE GENERATOR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG)

128

EA

586

TM 55-1925-209-24P, FIELD AND SUSTAINMENT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR SHIP'S SERVICE GENERATOR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG)

128

EA

0163-278

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 587 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TM 55-1925-210-24, FIELD AND SUSTAINMENT MAINTENANCE MANUAL FOR EMERGENCY GENERATOR SET INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

588

TM 55-1925-210-24P, FIELD AND SUSTAINMENT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR EMERGENCY GENERATOR SET INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-211-24, FIELD AND SUSTAINMENT MAINTENANCE MANUAL FOR PUMP DRIVE ENGINE INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG)

128

EA

589

128

EA

590

TM 55-1925-211-24P, FIELD AND SUSTAINMENT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR PUMP DRIVE ENGINE INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG)

128

EA

0163-279

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 591 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TM 55-1925-212-24&P, FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR BOW THRUSTER ENGINE INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-213-24&P, FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR LUBE OIL PURIFICATION SYSTEM INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-214-24&P, FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR BOW THRUSTER INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-215-24&P, FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR STEERING GEAR SYSTEM INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

592

128

EA

593

128

EA

594

128

EA

0163-280

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 595 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TM 55-1925-222-24&P, FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR PROPULSION CONTROLS INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-223-24&P, FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR MAIN REDUCTION GEAR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-224-24&P, FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR ENVIRONMENTAL CONTROL SUBSYSTEM INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-225-24&P, FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR ENGINE ROOM MONITORING SYSTEM INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

596

128

EA

597

128

EA

598

128

EA

0163-281

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 599 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TM 55-1925-226-24&P, FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR COMMISSARY EQUIPMENT INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-228-24&P, FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR PROPULSION SHAFT COUPLINGS, BRAKES, AND SEALS INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-231-24&P, FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR REFRIGERATION MACHINERY INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-233-24&P, FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR LAUNDRY EQUIPMENT INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

600

128

EA

601

128

EA

602

128

EA

0163-282

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 603 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TM 55-1925-273-10-1thru -2, OPERATOR'S MANUAL FOR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

604

TM 55-1925-273-10-3 thru -4, OPERATOR'S MANUAL FOR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG)

128

EA

605

TM 55-1925-273-24&P-1, FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG)

128

EA

606

TM 55-1925-273-24&P-2, TM 55-1925-273-24&P-3 FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG)

128

EA

0163-283

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 607 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TM 55-1925-273-SDC, SHIPBOARD DAMAGE CONTROL MANUAL FOR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

608

TM 55-1925-282-14&P, OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR REVERSE OSMOSIS WATER PURIFICATION UNIT INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-283-13&P, OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR FUEL FILTER/WATER SEPARATOR (FUEL TRANSFER SYSTEM) INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-284-14&P, OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR MARINE SANITATION DEVICE FOR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG)

128

EA

609

128

EA

610

128

EA

0163-284

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 611 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TM 55-1925-285-13&P, OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR OIL WATER SEPARATOR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-286-13&P, OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR COMPRESSOR FOR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-292-14&P, OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR FIRE FIGHTING, FIRE ALARM, AND FIRE SUPPRESSION SYSTEMS FOR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) TM 55-1925-294-14&P, OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR DECK MACHINERY AND HYDRAULIC SYSTEM FOR INLAND AND COASTAL LARGE TUG (LT) NSN 1925-01-509-7013 (EIC XAG) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 3

U/I EA

612

128

EA

613

128

EA

614

128

EA

0163-285

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 615 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TM 55-1945-221-14&P, OPERATOR, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR OUTBOARD MOTOR (JOHNSON-OMC) MODEL #70 2000 OUTBOARD MOTOR CORPORATION NSN 2805-01-505-1613 TM 55-1945-224-14&P, OPERATOR, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR BOAT, INFLATABLE, RIGID HULL (ZODIAC) MODEL MB-10005 H472 TM 55-5830-283-10, OPERATOR'S MANUAL FOR U.S. ARMY WATERCRAFT GLOBAL MARITIME DISTRESS AND SAFETY SYSTEM (GMDSS) NSN 5830-01-528-6276 (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

616

128

EA

617

128

EA

618

TM 55-5825-311-10-1, OPERATOR'S MANUAL FOR U.S. ARMY WATERCRAFT COMMAND, CONTROL, COMMUNICATIONS, COMPUTERS, INTELLIGENCE, SURVEILLANCE, AND RECONNAISSANCE (C4ISR) SUITE

128

EA

0163-286

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 619 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TM 55-5825-311-10-2, OPERATOR'S MANUAL FOR U.S. ARMY WATERCRAFT COMMAND, CONTROL, COMMUNICATIONS, COMPUTERS, INTELLIGENCE, SURVEILLANCE, AND RECONNAISSANCE (C4ISR) SUITE 7330-00-616-0997 TONGS, FOOD- SERVING 12 LONG (Galley) 7330-00-616-0997 (64067) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

620

128

EA

621

5140-00-587-5558

TOOL BOX, PORTABLE (Machine Shop CAB A) 5140-00-587-5558 (80244)

128

EA

622

5130-01-502-6505

TOOL, BRG LOCKNUT (Machine Shop, AMS2) 592Y (64462)

128

EA

0163-287

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 623 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-01-343-1010 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TOOL, CARBON SEAL 6V4979 (11083) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

624

5120-01-275-2154

TOOL, CRANKOVER ENGINE 9561844 (72915)

128

EA

625

5210-01-217-9642

TOOL GROUP, FLOW CHECKING 1P540 (11083)

128

EA

0163-288

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 626 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5180-01-348-6741 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TOOL KIT (AMS 2) 2125-9901-000 (80871) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

627

5180-00-293-2875

TOOL KIT, CARPENTERS (Machine Shop CAB A) SC5180-90-CL-N08 (50980)

128

KT

628

5120-01-356-8183

TOOL KIT, COUPLING (Machine Shop, AMS2) 728237 (64589)

128

EA

629

5180-01-345-4522

TOOL KIT, DIESEL INJECTOR 8S-2245 (11083)

128

KT

0163-289

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 630 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5180-00-391-1087 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TOOL KIT, ELECTRICAL (AMS 2) 5180-00-391-1087(80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I KT

631

5180-00-391-1087

TOOL KIT, ELECTRICAL REPAIR (Machine Shop) 5180-00-391-1087(80244)

128

KT

632

5180-01-548-7634

TOOL KIT, GENERAL MECHANIC'S (Machine Shop D1) PD484 (19200)

128

KT

0163-290

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 633 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5280-00-511-1950 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TOOL KIT, MACHINISTS (Machine Shop D13) SC5280-95CLA02 (19204) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I SE

634

5180-00-699-5273

TOOL KIT, MASTER, MECHANICS (Tool Cage EOS A1) SC5180-90-CL-N05 (50980)

128

KT

635

5120-01-428-8214

TOOL KIT, METRIC (AMS2) OEXSM714K (55719)

128

EA

0163-291

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 636 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5180-01-531-6876 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TOOL KIT, PUMP (Machine Shop, AMS2) 78880689 (18930) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I KT

637

5180-00-596-1474

TOOL KIT, REFRIGERATION (Machine Shop) SC 5180-90-CL-N18 (50980)

128

KT

638

5180-00-754-0661

TOOL KIT, WELDER'S (Machine Shop, AMS2) SC 5180-90-N39 (50980)

128

KT

0163-292

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 639 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5280-00-278-9919 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TOOL SET, MEASURING MACHINIST (Machine Shop CAB C) C5280-95CLA01 (19204) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I SE

640

5180-01-358-3781

TOOL SET, OFF-ENGINE LIFTER SETTING 6V-4180 (11083)

128

EA

641

5120-00-366-1496

TOOL, SUPPORT FORK ROD 8052958 (55380)

642

3439-00-542-0531

TORCH KIT, SOLDERING, LP GAS (Machine Shop D10) JT25 (70785)

128

EA

SOLDERING IRON & TORCH

0163-293

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 643 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 3433-01-174-4379 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TORCH OUTFIT, WELDING (Machine Shop, AMS2) 350-510-FS-SPEC (1HJ95) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I OT

644

7240-00-160-0441

TRASH CAN WITH COVER, 24 GAL (Machine Shop) 90124HDC (0T115)

128

EA

645

7350-00-195-7334

TRAY, MESS, CRES, 6 COMPARTMENTS STEEL (Galley) DWG 5-13-918 (81337)

128

EA

30

646

6675-00-866-0110

TRIANGLE, DRAFTING (Pilothouse) 1608 (1L9S9)

128

EA

0163-294

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 647 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 6675-00-190-5867 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TRIANGLE, DRAFTING, PLASTIC 30 TO 60 DEG 11 (Pilothouse) PD392 (81336) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

648

6675-00-190-5856

TRIANGLE, DRAFTING, PLASTIC , 45 X 45 DEGREE, 4", TYPE 1 (Pilothouse) PD392 (81336)

128

EA

649

6675-00-190-5862

TRIANGLE, DRAFTING, PLASTIC 45 X 45 DEG 8" (Pilothouse) 6675-00-190-5862 (80244)

128

EA

0163-295

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 650 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 3920-01-113-3517 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TRUCK, HAND, 2 WHEELED, 500 LB CAPACITY (Machine Shop D7) KKK-T-683 (81348) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

651

4720-01-521-1706

TUBING, NONMETALLIC (DC Locker) 73067 (00VT4)

128

BX

652

4720-01-529-5825

TUBING, NONMETALLIC (DC Locker) 24194 (8F723)

128

FT

0163-296

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 653 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 7350-00-170-8330 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) TUMBLER DRINKING (Galley) 7350-00-170-8330 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I BX

654

7350-00-223-7836

TUMBLER, DRINKING, 10 OZ, PLASTIC (Galley) 7350-00-223-7836 (80244)

128

DZ

655

4310-00-289-5967

VACUUM PUMP UNIT, ROTARY 1550-V138K-634AX (24123)

128

EA

0163-297

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 656 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 4820-00-540-2381 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) VALVE, FOOT (Vid Mar Vest D4) 315F-N (20266) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I AY

657

5120-00-243-9072

VISE, BENCH AND PIPE, 5 IN JAW, 6 IN OPENING, TYPE 4 (Machine Shop, AMS2) PD5120-00-243-9072 (80244)

128

EA

658

5120-00-288-6518

VISE, PIPE, HINGED-JAW, 1/8B TO 4-1/2 CAP, TYPE 1, CLASS 2 (Machine Shop, AMS2) A-A-3050 (58536)

128

EA

0163-298

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 659 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5310-01-094-8810 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) WASHER, SQUARE CONE 3320-14-01 (78189) (4) USABLE ON CODE (5)

0163

(6) QTY RQR

U/I

660

6630-01-531-7670

WATER SAMPLING TESTING KIT, PH (DC Locker) ICQ-260 (93255)

128

KT

661

5510-00-268-3476

WEDGE, TAPERED, HARD WOOD, 1-1/2" X 2" X 12" (DC Main Deck S14) 5184291PC10 (53711) WEDGE, TAPERED, HARD WOOD, 2" X 2" X 8" (DC Main Deck S14) C20-IR (0087K) WEDGE, TAPERED, HARD WOOD, 4" X 2" X 8" (DC Main Deck S14) 803-5184291PC1 (53711) WEDGE WOOD (DC Main Deck S14) 5184291 (53711)

128

EA

10

662

5510-00-268-3479

128

EA

10

663

5510-00-268-3485

128

EA

10

664

5510-00-268-3477

128

EA

10

0163-299

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 665 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5510-00-268-3480 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) WEDGE WOOD (DC Main Deck S14) S8800-461043 (80064) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 10

U/I EA

666

5510-00-268-3481

WEDGE WOOD (DC Main Deck S14) 803-461043 (80064)

128

EA

10

667

5510-00-268-3475

WEDGE, WOOD (DC Main Deck S14) S8800-461043 (80064)

128

EA

10

668

6605-00-266-6773

WEIGHT, SOUNDING, 9 LB (Arms Room) M-3717-14LBS (81349)

128

EA

669

8465-00-254-8803

WHISTLE, PLASTIC, BALL W/ LANYARD LIFE (DC Main Deck DC) 8465-00-254-8803 (83421)

128

EA

62

0163-300

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 670 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 9525-01-351-0846 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) WIRE, NONELECTRICAL 8243661 (72915) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

671

4010-00-285-9901

WIRE ROPE ASSEMBLY, SINGLE LEG (Bosun's Locker) M2902-1 (81349)

128

EA

672

4010-01-529-4762

WIRE ROPE ASSEMBLY, SINGLE LEG (1-5/8" X 100 FT) (Towing Gear Locker) 13226E6327-5 (97403) WRENCH, ADJUSTABLE, 9-1/2 TO 10-1/2" LG, 1-1/8" JAW OPENING, SIZE 10 (Bosuns Store Rom S28) 1b7536 (11083)

128

EA

10

673

5120-00-449-8083

128

EA

674

5120-00-203-4832

WRENCH, BASIN, INTERCHANGABLE JAW TYPE 7 (Machine Shop D4) 5120-00-203-4832 (7L527)

128

EA

0163-301

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 675 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-01-345-9847 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) WRENCH, BASKET BOLT 8236718 (72915) (4) USABLE ON CODE (5)

0163

(6) QTY RQR

U/I

676

5120-01-266-7433

WRENCH BONNET NUT 8T-5287 (11083)

677

5120-01-348-2202

WRENCH, BOWL (Machine Shop, AMS2) 0003-3997-000 (80871)

128

EA

678

5210-01-266-7433

WRENCH, FUEL INJECTION PUMP 8T5287 (11083)

0163-302

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 679 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5130-00-184-1427 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) WRENCH, IMPACT, PNEUMATIC, 3/4 DRIVE (Tool Cage EOS A1) 3336929 (45152) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

680

5130-00-234-4881

WRENCH, IMPACT, PNEUMATIC, 3/8 DRIVE (Paint Locker Main Deck) 5130-00-234-4881 (80244)

128

EA

681

5210-00-162-2912

WRENCH, LAMP, SEARCHLIGHT (Machine Shop AMS2) 9871 (10741)

128

EA

682

5120-01-081-1922

WRENCH, OIL FILTER (DC Locker VIDMAR) 185-3630 (11083)

128

EA

0163-303

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 683 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-01-262-7306 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) WRENCH, OIL FILTER (Machine Shop) 3400158 (0B8S3) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

684

5120-00-264-3796

WRENCH, OPEN END, ADJUSTABLE, 11-12" TO 12-12J, 1-5/16" JAW OPENING, SIZE 12 (Towing Gear Locker) 11655778-5 (19207)

128

EA

685

5120-00-449-8084

WRENCH, OPEN END, ADJUSTABLE, 23-1-2 TO 25" LG, 2-17/16" JAW OPENING, SIZE 24 (DC Main Deck S5) AC124 (72368)

128

EA

686

5120-00-277-1478

WRENCH, PIPE, ADJ, HEAVY DUTY ALUMINUM HANDLE, 14" LONG, 1/2" TO 1-1/2" CAP, TYPE 2, CLASS C (Machine Shop) 5120-00-277-1478 (80244)

128

EA

0163-304

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 687 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-270-4310 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) WRENCH, PIPE, ADJ, HEAVY DUTY, 48" LONG, 5" CAP, TYPE 2, CLASS A (DC Main Deck S6) 5120-00-270-4310 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

688

5120-00-277-1477

WRENCH, PIPE, ADJ, HEAVY DUTY, ALUMINUM HANDLE, 10" LONG, 1/4" TO 1" CAP, TYPE 2 CLASS C (Machine Shop Cab A) 5120-00-277-1477 (80244)

128

EA

689

5120-00-277-1479

WRENCH, PIPE, AJD, HEAVY DUTY, ALUMINUM HANDLE, 18" LONG, 1" TO 2" CAP, TYPE 2, CLASS C (Tool Cage EOS C1) 5120-00-277-1479 (80244)

128

EA

0163-305

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 690 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-277-1480 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) WRENCH, PIPE, ADJ, HEAVY DUTY, ALUMINUM HANDLE, 24" LONG, 1-1/2" TO 2-1/2" CAP, TYPE 2, CLASS C (Machine Shop Cab A) 5120-00-277-1480 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 2

U/I EA

691

5120-00-277-1481

WRENCH, PIPE, ADJ, HEAVY DUTY, ALUMINUM HANDLE, 36" LONG, 2-1/2 TO 3-1/2 CAP, TYPE 2, CLASS C (Machine Shop Cab A) 5120-00-277-1481 (80244) WRENCH, PIPE, CHAIN, 3/4 TO 4 IN SIZE PIPE 32 IN LONG TYPE 3, CLASS A (Machine Shop D1) WA36 (50171)

128

EA

692

5120-00-240-1411

128

EA

693

5120-00-242-3249

WRENCH, PIPE, STRAP, 12 LONG, 1/8 IN TO 2 IN PIPE TYPE (Machine Shop D1) 5120-00-242-3249 (80244)

128

EA

0163-306

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 694 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-474-7227 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) WRENCH SET, RATCHET, 11 WRENCHES, SIZES 3/8 IN THRU 1 IN VINYL ROLL (Machine Shop, AMS2) 5120-00-474-7227 (80244) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I SE

695

5120-00-204-1999

WRENCH SET, SOCKET 3/4 IN SQUARE DRIVE, 12 POINT, 15/16 TO 2-3/8 IN (Machine Shop D8) B107.1 (5047)

128

SE

696

5120-00-081-2309

WRENCH SET, SOCKET, 1" DRIVE 12 PT, TYPE 2, CLASS 2, STYLE A (Machine Shop Cab A) B107.1 (5047)

128

SE

697

5130-00-357-5135

WRENCH SET, SOCKET, 3/4 IN SQUARE DRIVE, 6 POINT 9/16 TO 1-1/2 IN (Paint Locker Main Deck) A-A-399A (58536)

128

SE

0163-307

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 698 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-322-6231 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) WRENCH SET, SOCKET, 3/8 SQUARE DRIVE 23 PIECES 51200017510 (19207) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I SE

699

5120-01-428-8300

WRENCH SET, THIN LTA812 (551A)

700

5120-01-375-5889

WRENCH, SOCKET 8T-0528 (11083)

701

5120-00-277-9076

WRENCH, SPANNER (Machine Shop Cab A) 2150-00-277-9076 (80244)

128

EA

702

5120-01-348-4068

WRENCH, SPANNER (Machine Shop, AMS2) 0003-3677-000 (80871)

128

EA

0163-308

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 703 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-293-0406 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) WRENCH, SPANNER, FIXED PIVOT PT, ADJUSTABLE HOOK, 1-1/4" TO 3" DIA, TYPE 1, CLASS 1 (Machine Shop Cab C) JC472 (1CV05) WRENCH, TAP & REAMER, STRAIGHT HANDLE, 15-16 IN LONG, 0.164 IN TO 3/4 IN TAPS, TYPE 2, SIZE 4 (Tool Cage EOS B3) 6 (1NEX4) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 10

U/I EA

704

5120-00-289-0539

128

EA

705

5120-00-449-8245

WRENCH, TAP & REAMER, STRAIGHT HANDLE, 25-31 IN LONG, 1/2 TO 1-1/4 IN TAPS, TYPE 2, SIZE 8 (Machine Shop D11) 7-1/2 (1NEX4)

128

EA

706

5120-00-277-4065

WRENCH, TAP & REAMER, STRAIGHT HANDLE, HAND REAMER, 1/2-1 IN TAPS, 3/8-1/2 IN REAMERS, TYPE 2, SIZE 7 (Machine Shop Cab A) DWG5120-00-277-4065 (80244)

128

EA

707

5120-01-430-9431

WRENCH, TAP & REAMER, STRAIGHT HANDLE, 5/8 IN LONG, 1/16 TO 1/4 IN TAPS, 1/8 TO 1/4 IN REAMERS, TYPE 2, SIZE 1 (Machine Shop Cab A) 91A (57163)

128

EA

0163-309

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 708 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-00-494-1929 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) WRENCH, TORCH & REG 6 WRENCHES 8-5/8 IN LONG, SIZES 7/16 IN THRU 1 IN (Machine Shop Cab A) DWG5120-00-494-1929 (80244) WRENCH, TORQUE (Machine Shop) TE352A (55719) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

709

5120-01-355-1772

128

EA

710

5120-00-221-7981

WRENCH, TORQUE, 0-2000 FT LBS (0-2712 Nm) TEX2005TL (55719)

128

EA

711

5120-00-640-6365

WRENCH, TORQUE, 0-250 FT LBS, 1/2" SQ MALE DRIVE, TYPE 2, CLASS 1, STYLE A (Tool Cage EOS C1) B107.14M TY1CLBST1 (05047) WRENCH, TORQUE, 0-600 IN-LB (Machine Shop) B107.300 (05047)

128

EA

712

5120-00-288-8865

128

EA

713

5120-00-555-1521

WRENCH, TORQUE, 0-1000 FT LB (Machine Shop, AMS2) TQ1003A (55719)

128

EA

0163-310

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 Table 2. (1) ITEM NUMBER 714 (2) NATIONAL STOCK NUMBER (NSN) AND ILLUSTRATION 5120-01-396-6072 Basic Issue Items (BII) (3) DESCRIPTION, PART NUMBER/(CAGEC) WRENCH, TORQUE, 100-500 FT LB (Machine Shop, AMS2) GGG-W-2843 (81348) (4) USABLE ON CODE 128 (5)

0163

(6) QTY RQR 1

U/I EA

715

5120-00-221-7983

WRENCH, TORQUE, 3/4" DR. 0 TO 600 FT LBS, TYPE 2, CLASS 1 (Machine Shop, AMS2) SW130-301 (10001)

128

EA

END OF WORK PACKAGE

0163-311/312 blank

03/15/2011 Rel(1.8) root(coeibiiwp) wpno(S00002)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE ADDITIONAL AUTHORIZATION LIST (AAL)

0164

INTRODUCTION Scope This work package lists additional items you are authorized for the support of the Inland and Coastal Large Tug (LT). General This list identifies items that do not have to accompany the LT and that do not have to be turned in with it. These items are all authorized to you by CTA, MTOE, TDA, or JTA. Explanations of Columns in the AAL Column (1) - National Stock Number (NSN). Identifies the stock number of the item to be used for requisitioning purposes. Column (2) - Description, Part Number/(CAGEC). Identifies the Federal item name (in all capital letters) followed by a minimum description when needed. The last line below the description is the part number and the Commercial and Government Entity Code (CAGEC) (in parentheses). Column (3) - Usable On Code. When applicable, gives you a code if the item you need is not the same for different models of equipment. Column (4) - U/I. Unit of Issue (U/I) indicates the physical measurement or count of the item as issued per the National Stock Number shown in column (1). Column (5) - Qty Recm. Indicates the quantity recommended.

0164-1

03/15/2011 Rel(1.8) root(aalwp) wpno(S00003)

TM 55-1925-273-10-4 Table 1. (1) NATIONAL STOCK NUMBER (NSN) 7643-01-403-9221 Additional Authorization List. (3) USABLE ON CODE 128 (4) U/I EA (5)

0164

(2) DESCRIPTION, PART NUMBER/ (CAGEC) AIRBORNE DATA CONTROL UNIT, VDC-300 (DATA EQUIPMENT) TOPO,MC 8G PRODUCTS (Radio Equipment Rack #1) (LT 803 Only) SI 006329 0000 (47358) AN/PSN INTERFACE & SWITCHBOX (Pilothouse, Port and Starboard, Over Chart Table and GMDSS Table) 9801 (0JDM6) ANTENNA, GPS PLGR (Mast, Aft) AT575-32WTNC-000-RG-NM (0UVG2)

QTY RECM 1

128

EA

128 128 128 128

EA EA EA EA

2 1 1 2

5985-01-213-0749

ANTENNA (Top of STBD Smoke Stack) 229-BA (23657) ANTENNA, IFF (Mast, Starboard) AS-1778/UPX(19204) ANTENNA, TACSAT (SOTM) (Mast, Port and Starboard) Shelton GV-2432 (63563)

6130-01-475-7675 6605-01-225-3218

CHARGER, BATTERY (Pilothouse) BC-121 (62526) COMPASS, MAGNETIC, MOUNTED (Top of Pilothouse) 210332 (54121) DC/DC MODULE (Pilothouse Steering Stand) NB 03-942 (52315) IFF (Radio Equipment Rack #1) RT859A/APX-72 RX/TX (80058) IFF, CONTROL, RESPONDER C-6280A(P)/APX (Radio Equipment Rack #1)(LT 803 Only) (Radio Station Desk Unit) (All Other Vessels)

128 128

EA EA

1 1

128

EA

128 128

EA EA

1 1

1005-00-322-9715

MACHINE GUN, CALIBER .50 (Arms Locker) 8401485 (19204) MONITOR, TRANSPONDER SET, TS-1843A/APX (Radio Equipment Rack #1) (LT 803 Only) (Radio Station Desk Unit) (All Other Vessels) 01A233750A21-12 (98738)

128

EA

5895-00-895-4446

128

EA

0164-2

03/15/2011 Rel(1.8) root(aalwp) wpno(S00003)

TM 55-1925-273-10-4 Table 1. (1) NATIONAL STOCK NUMBER (NSN) 5825-01-395-3513 Additional Authorization List - Continued. (2) DESCRIPTION, PART NUMBER/ (CAGEC) NAVIGATION SET, SATELLITE SIGNALS (Pilothouse, Above Chart Table and GMDSS Table) 822-0077-103 (13499) RADIO, AN/PRC-117, RT1796 (All Vessels Except LT 803) (VHF/UHF LOS & TACTICAL SATELLITE SYSTEM) (Radio Equipment Rack #1) 10513-1000-03 (14304) 5820-01-442-7004 RADIO SET (Radio Equipment Rack #1) 01-P34110J100 (1VPW8) RECEIVER/TRANSMITTER, RADIO (Pilothouse) IC-M15 (62526) RECEIVER/TRANSMITTER,RADIO, RT 1694D 128 (AN/PRC-150) (LT 803 Only) (HF SYSTEM) (Radio Equipment Rack #1) 0N672486-02 (14304) RECEIVER/TRANSMITTER, RADIO RT-1796(P)/PRC(C) (PRC-103) (LT 803 Only) (VHF/UHF LOS & TACTICAL SATELLITE SYSTEM) 10513-1000-07 (14304) RUDDER POSITION AMPLIFIER (Pilothouse) 139-147 E03 (52315) 5805-01-400-4170 SCRAMBLER, AUDIO SIGNAL (Pilothouse) UT-74 (62526) SECURE FAX, TS-21 WITH SHOCK MOUNT (Crypteck)(Radio Equipment Rack #3) (LT 803 Only) 2194A (09JM1) SECURE PHONE STU 111 (DATA EQUIPMENT) (Radio Equipment Rack #3) (LT 803 Only) STU 111 (NO CAGE) SHOCK MOUNT, MT-3809/APX-72 (Radio Rack #1) (LT 803 Only) (Radio Station Desk Unit) (All Other Vessels) 7021-01-253-5641 TRANSPONDER COMPUTER, IFF KIT-1C (Radio Equipment Rack #1) (LT 803 Only) (3) USABLE ON CODE 128 (4) U/I EA (5)

0164

QTY RECM 2

128

EA

128

EA

5820-01-435-9288

128

EA

10

128

EA

128

EA

128

EA

128 128

EA EA

10 1

128

EA

128

EA

128

EA

0164-3

03/15/2011 Rel(1.8) root(aalwp) wpno(S00003)

TM 55-1925-273-10-4 Table 1. (1) NATIONAL STOCK NUMBER (NSN) Additional Authorization List - Continued. (2) DESCRIPTION, PART NUMBER/ (CAGEC) (Radio Station Desk Unit) (All Other Vessels) KIT-1C (06481) END OF WORK PACKAGE (3) USABLE ON CODE (4) U/I (5)

0164

QTY RECM

0164-4

03/15/2011 Rel(1.8) root(aalwp) wpno(S00003)

TM 55-1925-273-10-4 OPERATOR MAINTENANCE EXPENDABLE AND DURABLE ITEMS LIST

0165

INTRODUCTION Scope This work package lists expendable and durable items that you will need to operate and maintain the Inland and Coastal Large Tug (LT). This list is for information only and is not authority to requisition the listed items. These items are authorized to you by CTA 50-970, Expendable/Durable Items (Except Medical, Class V Repair Parts, and Heraldic Items), CTA 50-909, Field and Garrison Furnishings and Equipment or CTA 8-100, Army Medical Department Expendable/Durable Items. Explanation of Columns in the Expendable/Durable Items List Column (1) - Item No. This number is assigned to the entry in the list and is referenced in the narrative instructions to identify the item (e.g., Use brake fluid (WP 0098, Item 5)). Column (2) - Level. This column identifies the lowest level of maintenance that requires the listed item: C = Crew, F = Maintainer, H = Below Depot, D = Depot. Column (3) - National Stock Number (NSN). This is the NSN assigned to the item which you can use to requisition it. Column (4) - Item Name, Description, Part Number/(CAGEC). This column provides the other information you need to identify the item. The last line below the description is the part number and the Commercial and Government Entity Code (CAGEC) (in parentheses). Column (5) - U/I. Unit of Issue (U/I) code shows the physical measurement or count of an item, such as gallon, dozen, gross, etc.

0165-1

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 1 (2) LEVEL O Expendable and Durable Items List. (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Acetylene, Technical 6830-00-264-6751 Acetylene, Technical BB-A-106-B (81348) Antifreeze 2 O 6850-01-464-9125 Antifreeze A-A-52624 (58536) Bag, Plastic; 13 x 24 in 3 C 8105-00-655-8285 Bag, Plastic; 13 x 24 in. 8105-00-655-8285 (58536) Bag, Plastic; 33 x 39 in., 33 gal 4 C 8105-01-183-9769 Bag, Plastic; 33 x 39 in., 33 gal A-A-1668 (58536) Bag, Plastic; 36 x 58 in., 55 gal 5 C 8105-01-183-9764 Bag, Plastic; 36 x 58 in., 55 gal A-A-1668 (58536) Bag, Plastic; Trash Compactor 6 C 8105-01-070-0721 Bag, Plastic; Trash Compactor 1600 POLY BAG (53820) Basket, Wastepaper 7 O 7520-00-281-5911 Basket, Wastepaper A-A-182 (58536) Battery, Nonchargeable; Carbon Zinc, 6 V VS040S (11447) Battery, Nonrechargable; D Size, Alkaline, 1.5 V 13A (80204) Battery Power Supply; Auxiliary, 12 V RBP1270 (1XRW6) Battery, Storage; Marine, 12V 11 C 6140-00-190-9828 Battery, Storage; Marine, 12V SAE J537-8D-900 (80205) Battery, Storage; 6 V 12 O 6140-00-195-5339 Battery, Storage; 6 V 6V155 (1SWJ4)

0165

(3) NATIONAL STOCK NUMBER (NSN)

(5) U/I CY

GL

BX

BX

BX

EA

EA

Battery, Nonchargeable; Carbon Zinc, 6 V 8 C 6135-00-100-0413 EA

Battery, Nonrechargable; D Size, Alkaline, 1.5 V 9 O 6135-00-835-7210 PG

Battery Power Supply; Auxiliary, 12 V 10 C 6130-01-529-4545 EA

EA

EA

0165-2

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 13 (2) LEVEL O Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 5110-00-277-4590 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Blade, Hand Hacksaw; 12 in., 18 Teeth Per Inch B94.52M (05047) Blade, Hand Hacksaw; 12 in., 24 Teeth Per Inch 3494193 (45152) Broom, Push 15 C 7920-00-267-2967 Broom, Push; 16 in. 7920-00-267-2967 (83421) Broom, Upright 16 C 7920-00-291-8305 Broom, Upright 7920-00-291-8305 (83421) Brush, Bottle and Buret 17 C 7920-00-285-9100 Brush, Bottle and Buret 3153774PC625 (80064) Brush, Dusting, Bench; 13 in 18 C 7920-00-240-6358 Brush, Dusting, Bench; 13 in., Synthetic 7920-00-240-6358 (80244) Brush, Dusting, Bench; 12 in 19 C 7920-00-165-7277 Brush, Dusting, Bench; 12 in., Tampico Fiber 54007 (45092) Brush, Dusting, Bench; 14.5 in 20 C 7920-00-240-6357 Brush, Dusting, Bench; 14.5 in. 3-680 (94480) Brush, Paint; 1 in 21 C 8020-00-559-0438 Brush, Paint; 1 in. A-A-3193 (58536) Brush, Paint; 2 in 22 C 8020-00-559-0389 Brush, Paint; 2 in. A-A-3193 (58536) Brush, Paint; 3 in 23 C 8020-00-597-4770 Brush, Paint; 3 in. A-A-3192 (58536) Brush, Paint; 4 in 24 C 8020-00-178-8305 Brush, Paint; 4 in. 38B2650 (82125)

0165

(5) U/I BD

Blade, Hand Hacksaw; 12 in., 18 Teeth Per Inch

Blade, Hand Hacksaw; 12 in., 24 Teeth Per Inch 14 O 5110-00-277-4591 BD

EA

EA

DZ

EA

EA

EA

EA

EA

EA

EA

0165-3

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 25 (2) LEVEL C Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 7920-00-770-5800 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Brush, Sanitary Brush, Sanitary; 14 in. 7920-00-772-5800 (83421) Brush, Scrub; 8 in 26 C 7920-00-240-7174 Brush, Scrub; 8 in. 7920-00-240-7174 (80244) Brush, Scrub; 9.75 in 27 C 7920-00-240-7171 Brush, Scrub; 9.75 in. 7920-00-240-7171 (80244) Brush, Stencil 28 C 7520-00-223-8000 Brush, Stencil; 3/4 X 1 in. 70107 (45606) Brush, Wire, Rotary Wheel 29 O 5130-00-293-0263 Brush, Wire, Rotary Wheel 5130-00-293-0263 (17699) Brush, Wire, Scratch; 7.5 in 30 O 7920-00-246-8501 Brush, Wire, Scratch; 7.5 in. 7920-00-246-8501 (83421) Brush, Wire, Scratch; 14 in 31 O 7920-00-291-5815 Brush, Wire, Scratch; 14 in. 7920-00-291-5815 (83421) Can, Trash and Garbage; w/o Cover, 24 gal 90124HDC (0T115) Can, Trash and Garbage; w/o Cover, 32 gal 90146HDC (0T115) Cap, Food Handler's 34 O 8415-00-634-2410 Cap, Food Handler's; White 8415-00-634-2410 (80244) Cement, Rubber 35 O 4940-00-873-1730 Cement, Rubber V750-1 (16720) Clamp, Loop 36 C 5340-01-528-6183 Clamp, Loop RK 18609 (06TW0)

0165

(5) U/I EA

EA

EA

EA

EA

EA

EA

Can, Trash and Garbage; w/o Cover, 24 gal 32 O 7240-00-160-0441 EA

Can, Trash and Garbage; w/o Cover, 32 gal 33 O 7240-00-160-0440 EA

BX

CN

EA

0165-4

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 37 (2) LEVEL C Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 4030-00-243-4441 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Clamp, Wire Rope, Saddled; 5/8 in. MS16842-8 (96906) Clamp, Wire Rope, Saddled; 1/2 in. FFC 450 (81348) Cleaner, Lubricant, Preservative CLP-9ME (65983) Cleaning Compound, Acid, Pipeline B645800002 (1BZ02) Cleaning Compound, Alkali, Ferrous Surface B645800001 (1BZ02) Cleaning Compound, Solvent 42 C 6850-00-285-8011 Cleaning Compound, Solvent AA59601-2G (58536) Cleaner, Glass 43 C 7930-00-664-6910 Cleaner, Glass 7930-00-664-6910 (83421) Clipboard File 44 C 7520-00-240-5503 Clipboard File 7520-00-240-5503 (83421) Cloth, Abrasive (Crocus Cloth) 45 F 5350-00-221-0872 Cloth, Abrasive (Crocus Cloth) ANSI B74.18 (80204) Compound, Antiseize 46 O 8030-00-251-3980 Compound, Antiseize 034-000750 (26916) Compound, Corrosion Preventive 945011 (19203) Compound, Sealing; Silicone RTV 81724 (1PBQ8)

0165

(5) U/I EA

Clamp, Wire Rope, Saddled; 5/8 in

Clamp, Wire Rope, Saddled; 1/2 in 38 C 4030-00-243-4448 EA

Cleaner, Lubricant, Preservative 39 C 9150-01-193-6376 EA

Cleaning Compound, Acid, Pipeline 40 O 6850-01-493-8360 EA

Cleaning Compound, Alkali, Ferrous Surface 41 O 6850-01-493-8354 EA

GL

BX

EA

PG

LB

Compound, Corrosion Preventive 47 C 8030-00-231-2345 GL

Compound, Sealing; Silicone RTV 48 C 8030-01-299-1762 TU

0165-5

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 49 (2) LEVEL C Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 8020-00-664-3657 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Conditioner, Paint Brush Conditioner, Paint Brush PROTEXEMBRUSHCONDITIONER (00343) Cord, Fibrous; Cotton, 1/4 in 50 C 4020-00-240-2164 Cord, Fibrous; Cotton, 1/4 in. MILL1145 (81349) Cord, Fibrous; Cotton, 5/16 in 51 C 4020-00-240-2160 Cord, Fibrous; Cotton, 5/16 in. TC571 (81348) Cover, Can, Trash and Garbage; 24 gal 90124HDL (0T115) Cover, Can, Trash and Garbage; 32 gal 90146HDL (0T115) Cover, Ironing Board 54 O 7290-00-130-3271 Cover, Ironing Board; 16 x 54 in., Heat Resistant 7290-00-130-3271 (83421) Compound, Sealing; Gray 55 O 8030-00-616-7694 Compound, Sealing; Gray 9995535 (18876) Compound, Sealing; Loctite 242 24241 (05972) Compound, Silicone; Corrosion Inhibitor, 2 oz DC4-20Z (71984) Compound, Silicone; Corrosion Inhibitor, 8 oz AS8660 8OZTU (81343) Detergent, General Purpose; 16 oz 7930-00-926-5280 (80244) Detergent, General Purpose; 5 gal 7930-00-985-6911 (83421)

0165

(5) U/I EA

CL

CL

Cover, Can, Trash and Garbage; 24 gal 52 O 7240-00-161-1147 EA

Cover, Can, Trash and Garbage; 32 gal 53 O 7240-00-161-1143 EA

EA

CN

Compound, Sealing; Loctite 242 56 O 8030-01-025-1692 BT

Compound, Silicone; Corrosion Inhibitor, 2 oz 57 O 6850-00-177-5094 TU

Compound, Silicone; Corrosion Inhibitor, 8 oz 58 O 6850-00-880-7616 TU

Detergent, General Purpose; 16 oz 59 C 7930-00-926-5280 BX

Detergent, General Purpose; 5 gal 60 C 7930-00-985-6911 CN

0165-6

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 61 (2) LEVEL C Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 7930-00-880-4454 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Dishwashing Compound, Hand; 1 gal 7930-00-880-4454 (83421) Dishwashing Compound, Machine; 25 lb Drum 7930-00-985-6905 (80244) Disinfectant, Food Service 63 C 6840-00-810-6396 Disinfectant, Food Service MIL-DTL-11309 (81349) Disk, Abrasive; 24 Grit Size 64 C 5345-00-881-8378 Disk, Abrasive; 24 Grit Size ANSI B74.18 (80204) Disk, Abrasive; 36 Grit Size 65 C 5345-00-881-8377 Disk, Abrasive; 36 Grit Size ANSI B74.18 (80204) Disk, Abrasive; 60 Grit Size 66 C 5345-00-881-8375 Disk, Abrasive; 60 Grit Size ANSI B74.18 (80204) Distilled Water, Technical 67 O 6810-01-070-1784 Distilled Water, Technical 6170-18-7 (53390) Dresser, Abrasive Wheel 68 C 5120-00-223-9952 Dresser, Abrasive Wheel; Hand 1.25 in. dia, Size O 4528A1 (39428) Dustpan 69 C 7290-00-224-8308 Dustpan; Steel, Type 2, Size 12 7290-00-224-8308 (64067) Electrode, Welding; 6010, 1 X 14 in. AWSA5.1-78 E6010 0.125 (31505) Electrode, Welding; 6011, 3/32 X 12 in. AWSA5.1-69 E6011 0.093 (31505) Electrode, Welding; 7018, 3/16 X 14 in., 50 lb AWSA5.5-81 (31505)

0165

(5) U/I BX

Dishwashing Compound, Hand

Dishwashing Compound, Machine 62 C 7930-00-985-6905 EA

BX

EA

BX

EA

BT

EA

EA

Electrode, Welding; 6010, 1 X 14 in 70 O 3439-00-262-2670 CO

Electrode, Welding; 6011, 3/32 X 12 in 71 O 3439-00-262-2652 LB

Electrode, Welding; 7018, 3/16 X 14 in., 50 lb 72 O 3439-00-853-2719 CN

0165-7

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 73 (2) LEVEL O Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 7310-00-512-1076 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Filter, Coffee Maker Filter, Coffee Maker 20115.0000 (25628) Finish, Floor, Nonbuffing 74 C 7930-01-184-3905 Finish, Floor, Nonbuffing 7930-01-184-3905 (80244) Flux, Soldering 75 O 3439-01-236-9572 Flux, Soldering AA51145-1A (58536) Flux, Soldering 76 O 3439-00-255-4571 Flux, Soldering FORMULA 66 (75297) Flux, Welding 77 O 3439-00-255-4580 Flux, Welding 1 (94030) Foam Liquid, Fire Extinguishing; AFFF, 5 gal AFFF 3% 20L BIO FLUOFOAM 6 (FAAH2) Goggles, Industrial; Plastic Safety Type 484B (02622) Grease, Aircraft 80 O 9150-00-944-8953 Grease, Aircraft 132251538101 (H2237) Grease, Automotive and Artillery M-10924-D (81349) Grease, Ball and Roller Bearing; 14 oz L0189.001 (73219) Grease, Ball and Roller Bearing; 1.75 lb DOD-G-24508 (81349) Grease, Ball and Roller Bearing; 6.5 lb DOD-G-24508 (81349)

0165

(5) U/I MX

GL

CN

CN

LB

Foam Liquid, Fire Extinguishing; AFFF, 5 gal 78 C 4210-01-056-8343 CN

Goggles, Industrial; Plastic Safety Type 79 C 4240-00-764-5152 PR

CN

Grease, Automotive and Artillery 81 O 9150-01-197-7689 CN

Grease, Ball and Roller Bearing; 14 oz 82 O 9150-01-095-5512 CN

Grease, Ball and Roller Bearing; 1.75 lb 83 O 9150-00-149-1593 CN

Grease, Ball and Roller Bearing; 6.5 lb 84 O 9150-00-117-2928 CN

0165-8

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 85 (2) LEVEL C Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 9150-01-209-6868 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Grease, Food Processing Equipment DOD-G-24650 (81349) Grease, General Purpose; 14 oz 86 O 9150-01-525-1498 Grease, General Purpose; 14 oz MOBIL POLYREX EM-14 OZ (29700) Grease, General Purpose; 1.75 lb MIL-PRF-24139 (81349) Grease, General Purpose; 6.5 lb 88 O 9150-00-180-6382 Grease, General Purpose; 6.5 lb MIL-PRF-24139 (81349) Grease, General Purpose; Molybdenum, 6.5 lb MIL-DTL-23549 (81349) Grease, Wire Rope-Exposed Gear; 35 lb MIL-PRF-18458 (81349) Handle, Circular; Pushbroom 91 C 7920-00-141-5452 Handle, Circular; Pushbroom 7920-00-141-5452 (83421) Handle, Mop 92 C 7920-00-267-1218 Handle, Mop 7920-00-267-1218 (83421) Hook, Shower Curtain 93 C 7230-00-252-3394 Hook, Shower Curtain; 100 per Box L946 (26821) Hose, Nonmetallic; Clear, 1/2 in. x 30 ft W10336-008 (75906) Hose, Nonmetallic; Clear, 3/4 in. x 20 ft KUR13130C3/4 (05MH3) Hose, Nonmetallic; HP, -6, 25 ft 96 O 4720-01-528-5085 Hose, Nonmetallic; HP, -6, 25 ft ST06-6 (05MH3)

0165

(5) U/I LB

Grease, Food Processing Equipment

CN

Grease, General Purpose; 1.75 lb 87 O 9150-00-180-6381 CN

CN

Grease, General Purpose; Molybdenum, 6.5 lb 89 O 9150-00-235-5555 CN

Grease, Wire Rope-Exposed Gear; 35 lb 90 C 9150-00-530-6814 CN

EA

EA

BX

Hose, Nonmetallic; Clear, 1/2 in. x 30 ft 94 O 4720-01-531-6785 FT

Hose, Nonmetallic; Clear, 3/4 in. x 20 ft 95 O 4720-01-531-6788 FT

FT

0165-9

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 97 (2) LEVEL C Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 9150-00-111-6256 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Hydraulic Fluid, Fire Resistant MIL-PRF-46170 (81349) Hydraulic Fluid, Petroleum Base; 5 gal MIL-PRF-17672 (81349) Hydraulic Fluid, Petroleum Base; 55 gal MIL-PRF-17672 (81349) Isopropyl Alcohol, Technical 100 C 6810-00-983-8551 Isopropyl Alcohol, Technical 839889 (19203) Layout Dye 101 O 6850-01-015-0834 Layout Dye AA59168-1 (58536) Lubricant, Silicone 102 C 9150-01-469-7264 Lubricant, Silicone W46040-111 (75906) Lubricating Oil 103 O 9150-00-186-6681 Lubricating Oil M2104-1-30W (81349) Lubricating Oil, Air Compressor GST OIL 100 (96004) Lubricating Oil, Engine; 2.5 gal 105 O 9150-01-493-8350 Lubricating Oil, Engine; 2.5 gal B647800002 (1BZ02) Lubricating Oil, Engine; 40 Grade, 55 gal CAPRINUS XR 40 (54527) Lubricating Oil, Engine; 10W-30 Grade, 1 qt MIL-L-46152 (81349) Lubricating Oil, Engine; OE/HDO-30, 1 qt MIL-PRF-2104 (81349)

0165

(5) U/I GL

Hydraulic Fluid, Fire Resistant

Hydraulic Fluid, Petroleum Base; 5 gal 98 C 9150-00-985-7234 CN

Hydraulic Fluid, Petroleum Base; 55 gal 99 C 9150-00-985-7233 DR

QT

CN

EA

QT

Lubricating Oil, Air Compressor 104 O 9150-01-158-2881 CN

EA

Lubricating Oil, Engine; 40 Grade, 55 gal 106 C 9150-00-135-2634 DR

Lubricating Oil, Engine; 10W-30 Grade, 1 qt 107 C 9150-00-186-6699 QT

Lubricating Oil, Engine; OE/HDO-30, 1 qt 108 C 9150-01-433-7974 QT

0165-10

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 109 (2) LEVEL C Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 9150-01-413-6892 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Lubricating Oil, Engine, 10W-30 Grade, 5 gal J2362 (13873) Lubricating Oil, Engine; OE/HDO-10, 5 gal MIL-PRF-2104 (81349) Lubricating Oil, Engine; OE/HDO-30, 5 gal MIL-PRF-2104 GR30 (81349) Lubricating Oil, Engine, OE/HDO-40, 55 gal MIL-PAF-2104 (81349) Lubricating Oil, Exposed Gear 113 F 9150-01-398-7341 Lubricating Oil, Exposed Gear PRE-LUBE 19 (27843) Lubricating Oil, Gear; GO-80/90, 5 gal J2360 (81343) Lubricating Oil, General Purpose; 16 oz MIL-PRF-32033 (81349) Lubricating Oil, General Purpose; 1 qt DTE HEAVY MEDIUM (77988) Lubricating Oil, Refrigerant Compressor YORK OIL "CN" (66935) Metal Cleaner and Rust Remover B654800004 (1BZ02) Mophead, Wet 119 C 7920-00-141-5550 Mophead, Wet 7920-00-141-5550 (83421) Nail, Common, 8d, 5 lb 120 C 5315-00-753-3882 Nail, Common, 8d, 5 lb ASTM-F1667 NL CM S-07B (81346)

0165

(5) U/I CO

Lubricating Oil, Engine, 10W-30 Grade, 5 gal

Lubricating Oil, Engine; OE/HDO-10, 5 gal 110 C 9150-01-496-1946 CN

Lubricating Oil, Engine; OE/HDO-30, 5 gal 111 C 9150-01-433-7986 CN

Lubricating Oil, Engine, OE/HDO-40, 55 gal 112 C 9150-00-188-9862 DR

CN

Lubricating Oil, Gear; GO-80/90, 5 gal 114 C 9150-01-035-5393 CN

Lubricating Oil, General Purpose; 16 oz 115 C 9150--00-458-0075 CN

Lubricating Oil, General Purpose; 1 qt 116 C 9150--00-027-3098 QT

Lubricating Oil, Refrigerant Compressor 117 O 9150-00-598-2911 QT

Metal Cleaner and Rust Remover 118 O 6850-01-493-8355 EA

EA

BX

0165-11

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 121 (2) LEVEL C Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 5315-00-753-3885 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Nail, Common, 16d, 5 lb Nail, Common, 16d, 5 lb ASTM-F1667 NL CM S-11 B (81346) Napkin, Table, Paper 122 C 8540-00-285-7001 Napkin, Table, Paper A-A-2838 (58536) Oil, Food Processing Equipment DOD-L-24651 (81349) Oxygen, Technical 124 C 6830-01-049-5263 Oxygen, Technical BB-O-925 (81348) Pad, Ironing Board 125 C 7290-00-633-9124 Pad, Ironing Board; 16 in. X 54 in. X 3/8 in. thick A-A-297 (58536) Pad, Metal Polish Impregnated (Never Dull) A-A-59299 (58536) Pad, Scouring 127 C 7920-00-045-2940 Pad, Scouring 7447 (27293) Padlock; Keyed 128 C 5340-00-582-2742 Padlock; Keyed MS35647-2 (96906) Paper, Chemical Agent Detector D5-67-266 (81361) Paper, Tabulating Machine 130 C 7530-00-145-0414 Paper, Tabulating Machine; Continuous Flat A-A-3102 (58536) Paper, Toilet 131 C 8540-00-530-3770 Paper, Toilet; 80 Roll Box 100 (90274) Paste, Water Indicating 132 C 6850-00-001-4194 Paste, Water Indicating MIL-W-83779 (81349)

0165

(5) U/I BX

BX

Oil, Food Processing Equipment 123 C 9150-01-237-7467 GL

CY

EA

Pad, Metal Polish Impregnated (Never Dull) 126 C 7920-00-823-9818 CN

BX

EA

Paper, Chemical Agent Detector 129 C 6665-00-050-8529 BK

BX

BX

PG

0165-12

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 133 (2) LEVEL C Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 7520-00-935-7135 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Pen, Ball-Point Pen, Ball-Point; Black Ink, Fine Point 7520-00-935-7135 (83421) Pencil; Writing #2 134 C 7510-00-281-5234 Pencil; Writing #2 7510-00-281-5234 (83421) Petrolatum, Technical 135 C 9150-00-250-0933 Petrolatum, Technical PX7-5POUNDCAN (KO851) Pigment, Paint Products 136 O 8010-00-239-5737 Pigment, Paint Products; 5 lb TT-W-251 (81348) Plug, Ear 137 C 6515-00-137-6345 Plug, Ear; Hearing Protection, Universal Size, Vinyl Foam, Disposable, 400 per Box 4-375 (89875) Polish, Metal 138 C 7930-00-266-7136 Polish, Metal POLISH, METAL (6X798) Powder, Scouring 139 C 7930-00-205-0442 Powder, Scouring; 14 oz A-A-47 (58536) Propane 140 C 6830-00-584-3041 Propane; 14 oz Disposable Cylinder 2140 (6N430) Rag, Wiping 141 C 7920-00-205-1711 Rag, Wiping 7920-00-205-1711 (64067) Ratguard, Ship 142 O 2040-00-288-2866 Ratguard, Ship MILG2767 (81349) Refrigerant Gas Mixture 143 O 6830-01-457-7848 Refrigerant Gas Mixture A-A-58060-R404AW15.4 (58536) Remover, Floor, Polish 144 C 7930-00-045-6923 Remover, Floor, Polish 7930-00-045-6923 (80244)

0165

(5) U/I DZ

DZ

CN

CN

BX

EA

CN

EA

BE

EA

EA

GL

0165-13

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 145 (2) LEVEL C Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 4240-00-629-8199 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Respirator, Air Filtering Respirator, Air Filtering GT-9999-3005-7 (D2607) Respirator 146 C 4240-00-868-0203 Respirator 9201-000-1638 (08125) Rod, Welding; Copper Alloy Filler, 1/16 x 36 in. RBCUZN-A 0.062 (81348) Rod, Welding; Copper Alloy Filler, 1/8 x 36 in. AWSA5.27-69 RCUZNC (31505) Rod, Welding; Copper Alloy Filler, 3/32 x 36 in. AWSA5.27-85 CL RBCUZN-A 0.094 (31505) Rod, Welding; Steel Filler, 1/16 x 36 in. AWSA5.2-80 RG60 0.062 (31505) Rod, Welding; Steel Filler 1/8 x 36 in. AWSA5.2-80 RG60 0.125 (31505) Rod, Welding; Steel Filler, 3/32 x 36 in. AWSA5.2-80 RG60 0.093 (31505) Roller, Paint 153 C 8020-00-753-4915 Roller, Paint; 9 in., DYNEL A-A-2851 (58536) Roller Kit, Paint 154 C 8020-00-689-5379 Roller Kit, Paint; 9 in. (Roller, Cover, Tray and Extensions) A-A-2851 (58536) Rope, Fibrous; Halyard, Cotton Braided MILH226 (81349) Rosin Core Solder 156 O 3439-01-150-1051 Rosin Core Solder 1243-0001 (17794)

0165

(5) U/I BX

EA

Rod, Welding; Copper Alloy Filler, 1/16 x 36 in 147 O 3439-00-268-9668 LB

Rod, Welding; Copper Alloy Filler, 1/8 x 36 in 148 O 3439-00-518-1914 CO

Rod, Welding; Copper Alloy Filler, 3/32 x 36 in 149 O 3439-00-262-7565 CO

Rod, Welding; Steel Filler, 1/16 x 36 in 150 O 3439-00-246-0564 LB

Rod, Welding; Steel Filler 1/8 x 36 in 151 O 3439-00-246-0566 LB

Rod, Welding; Steel Filler, 3/32 x 36 in 152 O 3439-00-246-0565 LB

EA

KT

Rope, Fibrous; Halyard, Cotton Braided 155 C 4020-00-240-2161 RL

LB

0165-14

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 157 (2) LEVEL C Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 7510-00-161-6215 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Ruler, Nonmetallic; 12 in Ruler, Nonmetallic; 12 in. A-A-355 (12") (58536) Ruler, Nonmetallic; 18 in 158 C 7510-00-161-6217 Ruler, Nonmetallic; 18 in. A-A-355 (18") (58536) Sand, Construction 159 O 5610-01-407-3130 Sand, Construction 4643070155 (05MH3) Sand, Water Filter 160 O 5610-01-532-6919 Sand, Water Filter 4643020255 (05MH3) Smoke, 2.5 oz Aerosol Can 161 O 1365-01-359-7102 Smoke, 2.5 oz Aerosol Can 25S, ES400 (61908) Soap, Laundry 162 C 7930-00-579-8532 Soap, Laundry; Chip, 100 lb P-S-1792 (81348) Soap, Toilet 163 C 8520-00-129-0803 Soap, Toilet; Cake 06900 (61071) Sodium Bicarbonate, Technical 164 O 6810-00-264-6618 Sodium Bicarbonate, Technical AA374-2 (58536) Sodium Hypochlorite Solution 165 O 6810-00-598-7316 Sodium Hypochlorite Solution 6810-00-598-7316 (80244) Solder, Lead Alloy; 0.028 in. dia 166 O 3439-00-003-8601 Solder, Lead Alloy; 0.028 in. dia, Rosin Core, 1 lb SN10WRP20.028 1 LB (81346) Solder, Lead Alloy; 0.090 in. dia 167 O 3439-00-188-6988 Solder, Lead Alloy; 0.090 in. dia, Rosin Core, 1 lb SN40WRAP3 0.090 1 LB (81346) Solder, Lead-Tin Alloy; Acid Core, 1 lb SN50BS 1 LB (81346)

0165

(5) U/I EA

EA

BG

BG

EA

DR

BX

LB

BX

SL

SL

Solder, Lead-Tin Alloy; Acid Core, 1 lb 168 O 3439-00-163-4347 BR

0165-15

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 169 (2) LEVEL O Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 3439-01-150-1051 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Solder, Rosin Cone Solder, Rosin Cone 1243-0001 (17794) Solvent, Cleaning 170 O 6850-00-285-8011 Solvent, Cleaning AA59601-2G (58536) Solvent, Rosin Flux 171 O 6850-01-158-3928 Solvent, Cleaning Compound 05089 (10136) Staples, Paper Fastening 172 C 7510-00-272-9410 Staples, Paper Fastening; Heavy Duty, 1/2 X 1/2 in. S.F.-13 1/2 (02809) Storage, Chemical 173 O 6850-01-493-8356 Storage, Chemical B645800003 (1BZ02) Strap, Tiedown, Electrical Components MS3367-7-0 (81343) Tape, Antiseizing 175 O 8030-00-889-3535 Tape, Antiseizing; 1/2 in. 417043-2 (96214) Tape, Duct 176 C 5640-00-409-4265 Tape, Duct; 2.5 in. DUCTTAPEALUMINUM (45255) Tape, Insulation, Electrical; 1 in 177 C 5970-00-185-8531 Tape, Insulation, Electrical; 1 in. A-A-2094 1 IN. X 85 FT. (58536) Tape, Insulation, Electrical; 3/4 in. 88 (75037) Tape, Luminous 179 C 9390-01-462-6814 Tape, Luminous; 1 in. 3MN131PL (76381) Tape, Pressure Sensitive Adhesive; 1 in. 8783476 (19203)

0165

(5) U/I LB

DR

CN

BX

EA

Strap, Tiedown, Electrical Components 174 O 5975-01-034-5871 HD

EA

RO

RO

Tape, Insulation, Electrical; 3/4 in 178 C 5970-00-012-1276 RO

RO

Tape, Pressure Sensitive Adhesive; 1 in 180 C 7510-00-266-6712 RO

0165-16

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 181 (2) LEVEL C Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 7510-00-266-6710 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Tape, Pressure Sensitive Adhesive; 2 in. 232 2 IN. (76381) Tape, Pressure Sensitive Adhesive; 3 in. 232 3 IN. (76381) Tape, Reflective 183 C 9390-01-078-8660 Tape, Reflective; 3 in. 3150-3X50YD (76381) Tag, Caution (Used For Lockout/Tagout) 0116-LF-114-0100 (3HPE6) Tag, Danger (Used For Lockout/Tagout) NAVSEA 989015 (3HPE6) Tetrafluoroethane, Technical (R134A) 7798-3130 (2S827) Tie, Strip, Bag 187 C 8135-00-846-8409 Tie, Strip, Bag A-A-2105 (58536) Towel, Paper; 10 in 188 C 8450-00-291-0392 Towel, Paper; 10 in. A-A-696 (58536) Towel, Paper; 13 in 189 C 7920-00-823-9773 Towel, Paper; 13 in. 7920-00-823-9773 (83421) Tube, Bent, Metallic; 316 SS, 0.049, 1/2 in. (10 ft) 1/2049316SMLS (05MH3) Tube, Metallic; 316 SS, 0.049, 3/8 in. (10 ft) S09018-029 (75906) Tube, Metallic; Copper, 1/2 in 192 O 4710-00-277-4026 Tube, Metallic; Copper, 1/2 in. MIL-T-24107 (81349)

0165

(5) U/I RO

Tape, Pressure Sensitive Adhesive; 2 in

Tape, Pressure Sensitive Adhesive; 3 in 182 C 7510-00-266-6707 RO

RO

Tag, Caution (Used For Lockout/Tagout) 184 O 0116-LF-114-0100 BX

Tag, Danger (Used For Lockout/Tagout) 185 O 0116-LF-115-4300 BX

Tetrafluoroethane, Technical (R134A) 186 O 6830-01-390-9622 CY

BD

BX

MX

Tube, Bent, Metallic; 316 SS, 0.049, 1/2 in. (10 ft) 190 O 4720-01-528-6731 FT

Tube, Metallic; 316 SS, 0.049, 3/8 in. (10 ft) 191 O 4720-01-528-6805 FT

FT

0165-17

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4 Table 1. (1) ITEM NO. 193 (2) LEVEL O Expendable and Durable Items List - Continued. (3) NATIONAL STOCK NUMBER (NSN) 4710-00-277-4029 (4) ITEM NAME, DESCRIPTION, PART NUMBER/ (CAGEC) Tube, Metallic; Copper, 1/4 in. MIL-T-24107 (81349) Tube, Metallic; Copper, 3/8 in 194 O 4710-00-277-4027 Tube, Metallic; Copper, 3/8 in. ASTMB68B75375ODX0321NWLTHK (81346) Tube, Metallic; Copper, 5/16 in 195 O 4710-00-277-4030 Tube, Metallic; Copper, 5/16 in. MIL-T-24107 (81349) Tubing, Nonmetallic; Poly E, Black, 0.040, 1/4 in. (5 ft) PHEB-43 (05MH3) Tubing, Nonmetallic; Poly E, Black, 0.062, 1/2 in. (5 ft) PH EB 86 (05MH3) Tubing, Nonmetallic; Poly E, Black, 0.062, 3/8 in. (5 ft) PH EB 64 (05MH3) Twine, Fibrous 199 C 4020-00-241-8886 Twine, Fibrous; Linen T-T-891 (81348) Wire, Nonelectrical (.0020 DIA) MS20995N20 (80205) Wrap, Plastic Film 201 C 8135-00-838-0122 Wrap, Plastic Film; 15 in. WIDTH, 5000 ft L-P-370 (81348)

0165

(5) U/I FT

Tube, Metallic; Copper, 1/4 in

FT

FT

Tubing, Nonmetallic; Poly E, Black, 0.040, 1/4 in. (5 ft) 196 O 4720-01-528-6803 FT

Tubing, Nonmetallic; Poly E, Black, 0.062, 1/2 in. (5 ft) 197 O 4720-01-528-6747 EA

Tubing, Nonmetallic; Poly E, Black, 0.062, 3/8 in. (5 ft) 198 O 4720-01-528-6754 FT

LB

Wire, Safety Lock, Stainless Steel, 0.020 DIA, MIL-W-6715 200 C 9525-00-529-9195 EA

RO

END OF WORK PACKAGE

0165-18

03/15/2011 Rel(1.8) root(explistwp) wpno(S00004)

TM 55-1925-273-10-4

GLOSSARY

Term Aft or after Aids to navigation Amidships Astern Athwartships Beam Berth Bilge Bilge pump Bitter end Bitts Boat hook

Definition At, near, or toward the stern. Charted marks (such as buoys, beacons, lights, and electronic devices) to assist navigators. Usually in the line of the keel, but sometimes halfway between bow and stern; often contracted to "midships". Behind the vessel; in the direction of the stern. At right angles to the fore-and-aft line of a vessel; across the vessel in a direction at right angles to the keel. The maximum width of a vessel, also called breadth. A place for securing a vessel, either in the stream or alongside a wharf or other vessel. The lowest interior position of a ship; the water that accumulates in the bilge is called bilge water. A pump used aboard vessels to remove accumulations of water in the bilge. Last end of a rope or inboard end of an anchor cable secured to a bitt. Pair of heavy posts, set vertically in a deck or on a pier, to which mooring or towing lines are fastened. A wooden staff with a metal hook and prod at one end used for fending off or holding on when coming alongside a vessel or a wharf. It is also used for picking up small objects from the water. The forward part of a vessel. A line leading from the bow of a vessel. Partition dividing the interior of a vessel into various compartments. To wear down by rubbing the surface of a line against a solid object. A guard of canvas, rope, or similar material placed around spars, lines, or rigging to prevent wear. Round or oval holes in a vessel's bulwark, sometimes fitted with rollers, through which hawsers and ropes are passed; also blocks of wood for supporting boats, weights, and so on. Wood or metal fitting that has two projecting horns to which a line is secured.

Bow Bowline Bulkhead Chafe Chafing gear Chocks

Cleat

Glossary-1

03/15/2011 Rel(1.8) root(glossary) wpno(B00001)

TM 55-1925-273-10-4

GLOSSARY - Continued
Term Coaming Coxswain Dogs Draft Engine room Faking down Definition Sidewall of a hatch projecting above the deck around the perimeter of the hatch to prevent water from going below. The enlisted person in charge of a small craft. Small, bent metal fittings used to secure watertight doors, hatch covers, manhole covers, and so on to close and fasten as tight as possible. The depth of water which a vessel requires to float freely; the depth of a vessel from the waterline to the keel; also a sling load of cargo. Compartment containing the propulsion machinery of a vessel. To lay down rope in long or circular turns (coils) so that each turn of rope overlaps the next one underneath in such a way that the rope is clear for running. A device of canvas, wood, or rope used over the side to take the shock of contact between vessel and wharf or other vessel when alongside. Parts of a vessel at or adjacent to the bow; also parts between the mid-ship section and stern. Lengthwise of a ship. The uppermost continuous strake in a vessel's side; the upper edge of a vessel's hull. Turning the wheel as far as possible in a given direction. Opening in a deck giving access to cargo holds. The machine by which a vessel is steered. Space between the lowermost deck and the bottom of a vessel that is used for the stowage of ballast, cargo, and stores. Framework of a vessel, including all decks, but exclusive of masts, yards, riggings, and all outfit or equipment. Toward the centerline of a vessel; also the side next to a wharf or another vessel. A unit of speed equal to 1 nautical mile per hour. Rope used to make anything fast, especially a short piece reeved through deadeyes, connecting shrouds, stays, and so on, to side of vessel. A compartment used for storage purposes in the stern of a vessel.

Fenders Fore Fore and aft Gunwale Hard over Hatch Helm Hold Hull Inboard Knot Lanyard Lazarette

Glossary-2

03/15/2011 Rel(1.8) root(glossary) wpno(B00001)

TM 55-1925-273-10-4

GLOSSARY - Continued
Term Left-hand propeller Life lines Life jacket Life raft Life ring Main deck Maneuver Moored Mooring lines Outboard PFD Pier Port side Potable water Quarter Definition When viewed from astern the propeller that turns counterclockwise while driving the boat ahead. Lines stretched fore and aft along the decks to give the crew safety against being washed overboard. An apparatus of buoyant material, designed to keep a person afloat. Raft kept buoyant by cylindrical air chambers, designed to keep survivors of a disaster afloat for rescue. Floating ring covered with canvas that is designed to support a person in water. First complete deck running the full length of a vessel. To make a series of changes in direction and position for a specific purpose. Lying with both anchors down; tied to a pier or anchor buoy; also to secure a vessel other than by anchoring with a single anchor. Cables or ropes used to tie up a vessel. Toward the side of a vessel in relation to the centerline or outside the vessel entirely; also, the side away from a wharf or vessel alongside. Personal Floatation Device: An apparatus of buoyant material, designed to keep a person afloat. A wharf which projects into a harbor, with water and accommodations for berthing vessels on two or more sides of it. The left side of a vessel looking forward, indicated by a red running light when underway at night; an opening in a vessel's side; a harbor for cargo operations. Drinkable water, meeting standards set by the U.S. Public Health Service. General area from the middle of a vessel to the extreme stern; also to proceed with the quarter to the wind or sea; to bring the sea or wind \ first on one quarter and then on the other. When viewed from astern, the propeller that turns clockwise while driving the boat ahead. Flat structure hung vertically on the sternpost, just aft of the screw, and used to steer a vessel by offering resistance to the water when turned to an angle with the centerline. The position of the rudder when it parallels the keel line of the vessel. All lights required to be shown during peacetime by a vessel that is under way.

Right-hand propeller Rudder

Rudder amidships Running lights

Glossary-3

03/15/2011 Rel(1.8) root(glossary) wpno(B00001)

TM 55-1925-273-10-4

GLOSSARY - Continued
Term Scope Seacock Sheave Spring line Starboard side Stern Stern line Stow Topside Towing bitts Trim Definition Length of anchor chain or cable to which a vessel is riding. Valve connecting with the outside raw water in the lower part of vessel which can be used to flood various parts. A grooved wheel or pulley inside a block over which a line runs. A mooring line leading at an angle of about 45 degrees from the fore and aft line of a vessel to a wharf or another vessel. Right side of a vessel looking forward; indicated by a green running light when underway at night. The after end (rear) of a vessel. A line leading from the stern of a vessel. To put away, to lock up for safekeeping in a proper place. Above decks, such as on the weather deck or bridge. Vertical posts on a vessel to which towing or mooring lines are secured. Difference in draft at the bow and stern of a vessel; manner in which a vessel floats on the water, whether on an even keel or down by the head or stern; shipshape. To adjust a vessel's position in the water by arranging ballast, cargo, and so on. To arrange for sailing; to assume, or cause a vessel to assume, a certain position, or trim, in the water. Link threaded on both ends of a short bar that is used to pull objects together. A vessel is said to be underway when she is not anchored, moored, aground, or beached. Projecting platform of timber, stone or other material which extends into water deep enough for vessels to be accommodated alongside for loading or unloading. The instrument attached to the rudder by which a vessel is steered. A piece of machinery, which operates a shaft, fitted with a drum or drums upon which lines or cables are wound to hoist or haul an object.

Turnbuckle Underway Wharf

Wheel Winch

Glossary-4

03/15/2011 Rel(1.8) root(glossary) wpno(B00001)

TM 55-1925-273-10-4

INDEX
Subject WP Sequence No.-Page No.

A
ADDITIONAL AUTHORIZATION LIST (AAL).......................................................................... WP 0164-1

C
COMPONENTS OF END ITEM (COEI)/ON-BOARD SPARES LIST (OBSL) AND BASIC ISSUE ITEMS (BII) LISTS....................................................................................................... WP 0163-1

D
DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS ENGINE ROOM: FUEL OIL, LUBE OIL, AND HYDRAULIC OIL FILL AND TRANSFER SYSTEMS............................................................................................................................... DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS ENGINE ROOM: MAIN ENGINES AND SHIP'S SERVICE DIESEL GENERATORS (SSDGs)............ DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS STEERING GEAR COMPARTMENT......................................................................................................... DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS TOWING GEAR LOCKER....................................................................................................................... DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS 01 LEVEL FAN ROOMS................................................................................................................................... DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS 01 LEVEL STATEROOMS AND SANITARY SPACES............................................................................ DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS 01 LEVEL WEATHER DECKS................................................................................................................. DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS 02 LEVEL WEATHER DECKS................................................................................................................. DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS AMS 2........... DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS BOATSWAIN'S STORE, ARMS LOCKER, AND LAUNDRY ROOM................................................................ DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS BOW THRUSTER COMPARTMENT................................................................................................ DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS ENCLOSED OPERATING STATION (EOS)................................................................................................ DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS GALLEY........ DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS MAIN DECK EXTERIOR.............................................................................................................................. DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS MAIN DECK STATEROOMS AND SANITARY SPACES............................................................................ DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS MAIN DECK VESTIBULE............................................................................................................................. DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS MESS/ RECREATION ROOM............................................................................................................. DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS PILOTHOUSE TOP AND MASTS................................................................................................................... DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS RADIO ROOM..................................................................................................................................... DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS SHAFT ALLEYS................................................................................................................................... DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS AMS 1........... WP 0042-1 WP 0041-1 WP 0050-1 WP 0049-1 WP 0061-1 WP 0060-1 WP 0058-1 WP 0062-1 WP 0046-1 WP 0057-1 WP 0048-1 WP 0044-1 WP 0055-1 WP 0051-1 WP 0056-1 WP 0053-1 WP 0054-1 WP 0065-1 WP 0063-1 WP 0047-1 WP 0045-1

Index-1

03/15/2011 Rel(1.8) root(aindx) wpno(B00002)

TM 55-1925-273-10-4

INDEX - Continued
Subject WP Sequence No.-Page No.

D
DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS ENGINE ROOM: MISCELLANEOUS SYSTEMS................................................................................... DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS PILOTHOUSE......................................................................................................................... DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS EMERGENCY DIESEL GENERATOR (EDG) ROOM..................................................................................... DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS FAN ROOM, MAIN DECK............................................................................................................................. WP 0043-1 WP 0064-1 WP 0059-1 WP 0052-1

E
EQUIPMENT DATA................................................................................................................. EQUIPMENT DESCRIPTION AND DATA EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES........................................................................................... EXPENDABLE AND DURABLE ITEMS LIST......................................................................... WP 0016-1 WP 0002-1 WP 0165-1

G
GENERAL INFORMATION..................................................................................................... WP 0001-1

I
INLAND AND COASTAL LARGE TUG (LT) MAINTENANCE................................................ WP 0161-1

L
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS 01 LEVEL EXTERIOR......... LOCATION AND DESCRIPTION OF MAJOR COMPONENTS 01 LEVEL INTERIOR.......... LOCATION AND DESCRIPTION OF MAJOR COMPONENTS 02 LEVEL EXTERIOR......... LOCATION AND DESCRIPTION OF MAJOR COMPONENTS AMS 1 AND BOW THRUSTER COMPARTMENT................................................................................................ LOCATION AND DESCRIPTION OF MAJOR COMPONENTS ENGINE ROOM................... LOCATION AND DESCRIPTION OF MAJOR COMPONENTS MAIN DECK EXTERIOR..... LOCATION AND DESCRIPTION OF MAJOR COMPONENTS MAIN DECK INTERIOR, BERTHING AREAS................................................................................................................. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS MAIN DECK INTERIOR, NON-BERTHING AREAS........................................................................................................ LOCATION AND DESCRIPTION OF MAJOR COMPONENTS PILOTHOUSE INTERIOR............................................................................................................................... LOCATION AND DESCRIPTION OF MAJOR COMPONENTS PILOTHOUSE TOP AND MASTS.................................................................................................................................... LOCATION AND DESCRIPTION OF MAJOR COMPONENTS SHAFT ALLEYS.................. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS STEERING GEAR COMPARTMENT, TOWING GEAR LOCKER, AND AMS 2................................................... LOCATION AND DESCRIPTION OF MAJOR COMPONENTS TANKS................................. WP 0004-1 WP 0008-1 WP 0005-1 WP 0012-1 WP 0011-1 WP 0003-1 WP 0009-1 WP 0010-1 WP 0007-1 WP 0006-1 WP 0014-1 WP 0013-1 WP 0015-1

O
ONBOARD EQUIPMENT LOADING PLAN............................................................................ OPERATION UNDER UNUSUAL CONDITIONS AIR CONDITIONING SPLIT PLANT OPERATION AND RADIO ROOM ROOFTOP AIR CONDITIONING UNIT EMERGENCY OPERATION........................................................................................................................... WP 0132-1 WP 0130-1

Index-2

03/15/2011 Rel(1.8) root(aindx) wpno(B00002)

TM 55-1925-273-10-4

INDEX - Continued
Subject WP Sequence No.-Page No.

O
OPERATION UNDER UNUSUAL CONDITIONS FM-200 FIRE SUPPRESSION SYSTEM.................................................................................................................................. OPERATION UNDER UNUSUAL CONDITIONS HEAVY WEATHER PREPARATIONS...... OPERATION UNDER UNUSUAL CONDITIONS INTERIM CHEMICAL, BIOLOGICAL, RADIOLOGICAL, AND NUCLEAR (CBRN) DECONTAMINATION PROCEDURES.............. OPERATION UNDER UNUSUAL CONDITIONS LAUNCH AND RETRIEVE WORKBOAT IN HEAVY WEATHER................................................................................................................. OPERATION UNDER UNUSUAL CONDITIONS MAIN ENGINE COLD WEATHER STARTING.............................................................................................................................. OPERATION UNDER UNUSUAL CONDITIONS MAIN ENGINE EMERGENCY STOPPING.............................................................................................................................. OPERATION UNDER UNUSUAL CONDITIONS PORTABLE FIRE EXTINGUISHER OPERATION........................................................................................................................... OPERATION UNDER UNUSUAL CONDITIONS SHIP STORES REFRIGERATION SPLIT PLANT OPERATION............................................................................................................... OPERATION UNDER UNUSUAL CONDITIONS STEERING SYSTEM FAILURE................ OPERATION UNDER UNUSUAL CONDITIONS TOWING MACHINE OPERATION POWERED BY CENTRAL HYDRAULICS.............................................................................. OPERATION UNDER UNUSUAL CONDITIONS EMERGENCY BILGE PUMPING USING FIRE AND GENERAL SERVICE PUMPS............................................................................... OPERATION UNDER UNUSUAL CONDITIONS FIRE DAMPER OPERATIONS.................. OPERATION UNDER UNUSUAL CONDITIONS FIREFIGHTING SYSTEM OPERATION USING PUMP DRIVEN ENGINE............................................................................................ OPERATION UNDER UNUSUAL CONDITIONS POWER GENERATION............................ OPERATION UNDER UNUSUAL CONDITIONS TOWING MACHINE UNUSUAL OPERATION........................................................................................................................... OPERATION UNDER UNUSUAL CONDITIONS ENGINE ROOM WASHDOWN SYSTEM (ERWWS)................................................................................................................................ OPERATION UNDER UNUSUAL CONDITIONS RIGGING THE LARGE TUG (LT) TO BE TOWED................................................................................................................................... OPERATION UNDER USUAL CONDITIONS HEATING, VENTILATION, AIR CONDITIONING, AND REFRIGERATION (HVACR) SYSTEMS............................................ OPERATION UNDER USUAL CONDITIONS ANCHOR WINDLASS..................................... OPERATION UNDER USUAL CONDITIONS BILGE/BALLAST SYSTEM............................. OPERATION UNDER USUAL CONDITIONS BILGE/BALLAST SYSTEM SHUTDOWN....... OPERATION UNDER USUAL CONDITIONS BOW THRUSTER SHUTDOWN..................... OPERATION UNDER USUAL CONDITIONS CAPSTAN....................................................... OPERATION UNDER USUAL CONDITIONS COMPRESSED AIR SYSTEM SHUTDOWN........................................................................................................................... OPERATION UNDER USUAL CONDITIONS CONNECTING SHORE POWER AND RIGGING THE GANGPLANK................................................................................................. OPERATION UNDER USUAL CONDITIONS EMERGENCY GENERATOR AND SWITCHBOARD SHUTDOWN............................................................................................... OPERATION UNDER USUAL CONDITIONS FINAL SHUTDOWN........................................ OPERATION UNDER USUAL CONDITIONS FIRE MAIN, GENERAL SERVICE, AQUEOUS FILM FORMING FOAM (AFFF), AND WASHDOWN COUNTERMEASURE (WDCM) SYSTEM SHUTDOWN............................................................................................................ OPERATION UNDER USUAL CONDITIONS FM-200 SYSTEM............................................ WP 0113-1 WP 0123-1 WP 0126-1 WP 0124-1 WP 0125-1 WP 0128-1 WP 0116-1 WP 0122-1 WP 0129-1 WP 0121-1 WP 0127-1 WP 0114-1 WP 0117-1 WP 0118-1 WP 0120-1 WP 0115-1 WP 0119-1 WP 0081-1 WP 0086-1 WP 0078-1 WP 0099-1 WP 0097-1 WP 0087-1 WP 0107-1 WP 0093-1 WP 0109-1 WP 0111-1 WP 0108-1 WP 0084-1

Index-3

03/15/2011 Rel(1.8) root(aindx) wpno(B00002)

TM 55-1925-273-10-4

INDEX - Continued
Subject WP Sequence No.-Page No.

O
OPERATION UNDER USUAL CONDITIONS FUEL OIL FILL, TRANSFER, AND SUPPLY SYSTEM SHUTDOWN............................................................................................................ OPERATION UNDER USUAL CONDITIONS GETTING UNDERWAY.................................. OPERATION UNDER USUAL CONDITIONS HEATING, VENTILATION, AIR CONDITIONING, AND REFRIGERATION (HVACR) SYSTEMS SHUTDOWN..................... OPERATION UNDER USUAL CONDITIONS HYDRAULIC SYSTEM SHUTDOWN............. OPERATION UNDER USUAL CONDITIONS INTERCOMMUNICATION AND SOUND POWERED TELEPHONE SYSTEMS..................................................................................... OPERATION UNDER USUAL CONDITIONS LIFE RAFTS.................................................... OPERATION UNDER USUAL CONDITIONS LUBE OIL PURIFICATION AND TRANSFER PIPING SYSTEM SHUTDOWN.............................................................................................. OPERATION UNDER USUAL CONDITIONS MAIN PROPULSION SYSTEM SHUTDOWN........................................................................................................................... OPERATION UNDER USUAL CONDITIONS MARINE SANITATION DEVICE (MSD).......... OPERATION UNDER USUAL CONDITIONS MARINE SANITATION DEVICE (MSD) SHUTDOWN........................................................................................................................... OPERATION UNDER USUAL CONDITIONS POTABLE WATER SYSTEM.......................... OPERATION UNDER USUAL CONDITIONS POTABLE WATER SYSTEM SHUTDOWN........................................................................................................................... OPERATION UNDER USUAL CONDITIONS RIGGING TO TOW......................................... OPERATION UNDER USUAL CONDITIONS SECURITY MEASURES FOR ELECTRONIC DATA....................................................................................................................................... OPERATION UNDER USUAL CONDITIONS SHIPS SERVICE DIESEL GENERATOR (SSDG) SHUTDOWN.............................................................................................................. OPERATION UNDER USUAL CONDITIONS STEERING SYSTEM SHUTDOWN................ OPERATION UNDER USUAL CONDITIONS TANK LEVEL INDICATOR (TLI) SYSTEMS SHUTDOWN........................................................................................................................... OPERATION UNDER USUAL CONDITIONS TOWING MACHINE........................................ OPERATION UNDER USUAL CONDITIONS WORKBOAT/CRANE..................................... OPERATION UNDER USUAL CONDITIONS BOW THRUSTER........................................... OPERATION UNDER USUAL CONDITIONS FIRE MAIN, GENERAL SERVICE, AQUEOUS FILM FORMING FOAM (AFFF), AND WASHDOWN COUNTERMEASURE SYSTEM......... OPERATION UNDER USUAL CONDITIONS HYDRAULIC SYSTEM................................... OPERATION UNDER USUAL CONDITIONS PREPARATION FOR USE............................. OPERATION UNDER USUAL CONDITIONS STEERING SYSTEM...................................... OPERATION UNDER USUAL CONDITIONS TANK LEVEL INDICATOR (TLI) SYSTEM..... OPERATION UNDER USUAL CONDITIONS COMMISSARY EQUIPMENT......................... OPERATION UNDER USUAL CONDITIONS DECALS AND INSTRUCTION PLATES......... OPERATION UNDER USUAL CONDITIONS ENGINE ORDER TELEGRAPH, GENERAL ALARM, DOOR ALARM, AND FREEZER ALARM SYSTEMS............................................... OPERATION UNDER USUAL CONDITIONS FUEL OIL FILL, TRANSFER, AND SUPPLY SYSTEM.................................................................................................................................. OPERATION UNDER USUAL CONDITIONS LUBE OIL PURIFICATION AND TRANSFER PIPING SYSTEM..................................................................................................................... OPERATION UNDER USUAL CONDITIONS MAIN PROPULSION SYSTEM....................... OPERATION UNDER USUAL CONDITIONS PORTABLE DEWATERING PUMP................ OPERATION UNDER USUAL CONDITIONS POWER GENERATION.................................. OPERATION UNDER USUAL CONDITIONS WORKSHOP EQUIPMENT............................ OPERATION UNDER USUAL CONDITIONS COMPRESSED AIR SYSTEM........................ WP 0103-1 WP 0095-1 WP 0106-1 WP 0101-1 WP 0082-1 WP 0092-1 WP 0102-1 WP 0096-1 WP 0080-1 WP 0105-1 WP 0079-1 WP 0104-1 WP 0094-1 WP 0066-1 WP 0110-1 WP 0098-1 WP 0100-1 WP 0088-1 WP 0085-1 WP 0074-1 WP 0070-1 WP 0075-1 WP 0067-1 WP 0076-1 WP 0077-1 WP 0090-1 WP 0112-1 WP 0083-1 WP 0073-1 WP 0072-1 WP 0071-1 WP 0089-1 WP 0068-1 WP 0091-1 WP 0069-1

Index-4

03/15/2011 Rel(1.8) root(aindx) wpno(B00002)

TM 55-1925-273-10-4

INDEX - Continued
Subject WP Sequence No.-Page No.

O
OPERATIONAL CHECKOUT.................................................................................................. OPERATOR TROUBLESHOOTING INDEX........................................................................... WP 0134-1 WP 0133-1

P
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION 01 LEVEL FAN ROOMS................................................................................ PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION 01 LEVEL STATEROOMS AND SANITARY SPACES.................................. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION 01 LEVEL WEATHER DECKS....................................................................... PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION 02 LEVEL WEATHER DECKS....................................................................... PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION BOATSWAIN'S STORE, ARMS LOCKER, AND LAUNDRY ROOM............. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION BOW THRUSTER COMPARTMENT............................................................. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION EMERGENCY DIESEL GENERATOR ROOM.............................................. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION ENCLOSED OPERATING STATION (EOS).................................................. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION ENGINE ROOM............................................................................................. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION FAN ROOM, MAIN DECK.............................................................................. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION FANTAIL......................................................................................................... PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION MAIN DECK STATEROOMS, SANITARY SPACES, AND PASSAGEWAY....................................................................................................................... PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION PILOTHOUSE................................................................................................ PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION PILOTHOUSE TOP AND MASTS.................................................................. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION RADIO ROOM................................................................................................ PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION SHAFT ALLEYS............................................................................................. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION STEERING GEAR COMPARTMENT............................................................. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION GALLEY......................................................................................................... PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION TOWING GEAR LOCKER.............................................................................. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION AMS 1............................................................................................................. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION GENERAL...................................................................................................... PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION MAIN DECK VESTIBULE............................................................................... Index-5 WP 0155-1 WP 0154-1 WP 0153-1 WP 0157-1 WP 0152-1 WP 0143-1 WP 0156-1 WP 0139-1 WP 0138-1 WP 0147-1 WP 0146-1 WP 0151-1 WP 0159-1 WP 0160-1 WP 0158-1 WP 0142-1 WP 0145-1 WP 0150-1 WP 0144-1 WP 0140-1 WP 0137-1 WP 0148-1

03/15/2011 Rel(1.8) root(aindx) wpno(B00002)

TM 55-1925-273-10-4

INDEX - Continued
Subject WP Sequence No.-Page No.

P
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION AMS 2............................................................................................................. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION MESS/RECREATION ROOM........................................................................ PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INTRODUCTION........ WP 0141-1 WP 0149-1 WP 0136-1

R
REFERENCES........................................................................................................................ WP 0162-1

S
STOWAGE AND DECAL/DATA PLATE GUIDE..................................................................... WP 0131-1

T
THEORY OF OPERATION ALARM SYSTEMS...................................................................... THEORY OF OPERATION BILGE AND BALLAST SYSTEMS.............................................. THEORY OF OPERATION BOW THRUSTER SYSTEM....................................................... THEORY OF OPERATION CATHODIC PROTECTION SYSTEM......................................... THEORY OF OPERATION COMPRESSED AIR SYSTEM.................................................... THEORY OF OPERATION CONTROL AIR SYSTEM............................................................ THEORY OF OPERATION DECK MACHINERY.................................................................... THEORY OF OPERATION ELECTRICAL SYSTEM.............................................................. THEORY OF OPERATION ENGINE COOLING SYSTEMS................................................... THEORY OF OPERATION FIRE MAIN, WASHDOWN AND SPRINKLER SYSTEMS.......... THEORY OF OPERATION FIRE SUPPRESSION SYSTEMS (FM-200, GALLEY GAYLORD AND PORTABLE).................................................................................................................... THEORY OF OPERATION HEATING, VENTILATION, AND AIR CONDITIONING (HVAC) SYSTEMS............................................................................................................................... THEORY OF OPERATION INTERNAL COMMUNICATION SYSTEMS................................ THEORY OF OPERATION LUBRICATING AND HYDRAULIC OIL FILL AND TRANSFER SYSTEM.................................................................................................................................. THEORY OF OPERATION MARINE SANITATION DEVICE................................................. THEORY OF OPERATION POTABLE WATER SYSTEM...................................................... THEORY OF OPERATION POWER GENERATION SYSTEM.............................................. THEORY OF OPERATION PROPELLER SHAFTS AND PROPELLERS.............................. THEORY OF OPERATION STEERING SYSTEM.................................................................. THEORY OF OPERATION REFRIGERATION SYSTEM....................................................... THEORY OF OPERATION FUEL SYSTEM........................................................................... THEORY OF OPERATION HYDRAULIC SYSTEMS............................................................. THEORY OF OPERATION MAIN PROPULSION ENGINES.................................................. THEORY OF OPERATION REVERSE REDUCTION GEAR SYSTEM.................................. TROUBLESHOOTING PROCEDURES.................................................................................. WP 0036-1 WP 0029-1 WP 0021-1 WP 0040-1 WP 0026-1 WP 0027-1 WP 0039-1 WP 0034-1 WP 0018-1 WP 0031-1 WP 0032-1 WP 0037-1 WP 0035-1 WP 0023-1 WP 0030-1 WP 0028-1 WP 0033-1 WP 0020-1 WP 0024-1 WP 0038-1 WP 0022-1 WP 0025-1 WP 0017-1 WP 0019-1 WP 0135-1

Index-6

03/15/2011 Rel(1.8) root(aindx) wpno(B00002)

RECOMMENDED CHANGES TO PUBLICATIONS AND BLANK FORMS


For use of this form, see AR 25-30; the proponent agency is OAASA.

Use Part II (reverse) for Repair Parts and Special Tool Lists (RPSTL) and Supply Catalogs/Supply Manuals (SC/SM).

DATE Dateyoufilledoutthisform.

TO (Forward to proponent of publication or form) (Include ZIP Code) U.S.ArmyTACOMLifeCycleManagementCommand ATTN:AMSTALCLMPP/TECHPUBS

FROM (Activity and location) (Include ZIP Code)

Yourmailingaddress

6501E.11MileRoad,Warren,MI483975000 PART I ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS PUBLICATION/FORM NUMBER DATE TITLE

TMNumber
ITEM PAGE PARAGRAPH LINE FIGURE TABLE NO.

DateoftheTM

TitleoftheTM

RECOMMENDED CHANGES AND REASON (Exact wording of recommended change must be given)

0007-3 0018-2

Figure 2, Item 9 should show a lockwasher. Currently shows a flat washer. Cleaning and inspection, Step 6, reference to governor support pin (14) is wrong reference. Reference should be change to (12).

SAMPLE

TYPED NAME, GRADE OR TITLE

TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION

SIGNATURE

YourName
DA FORM 2028, FEB 74

YourPhoneNumber

YourSignature
APD V4.00

REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED.

TO (Forward direct to addressee listed in publication) U.S.ArmyTACOMLifeCycleManagementCommand ATTN:AMSTALCLMPP/TECHPUBS

FROM (Activity and location) (Include ZIP Code)

DATE Dateyoufilledout thisform

Your Address

6501E.11MileRoad,Warren,MI483975000 PART II REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS PUBLICATION NUMBER DATE TITLE

TMNumber
PAGE NO. COLM NO. LINE NO. NATIONAL STOCK NUMBER

Date of the TM

Title of the TM
RECOMMENDED ACTION

TOTAL NO. REFERENCE FIGURE ITEM OF MAJOR NO. NO. NO. ITEMS SUPPORTED

SAMPLE
PART III REMARKS (Any general remarks, or recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.)

TYPED NAME, GRADE OR TITLE

YourName

TELEPHONE EXCHANGE/AUTOVON, SIGNATURE PLUS EXTENSION

YourPhoneNumber

YourSignature
APD V4.00

RECOMMENDED CHANGES TO PUBLICATIONS AND BLANK FORMS


For use of this form, see AR 25-30; the proponent agency is OAASA

Use Part II (reverse) for Repair Parts and Special Tool Lists (RPSTL) and Supply Catalogs/Supply Manuals (SC/SM).

DATE

TO (Forward to proponent of publication or form) (Include ZIP Code) U.S.ArmyTACOMLifeCycleManagementCommand ATTN:AMSTALCLMPP/TECHPUBS

FROM (Activity and location) (Include ZIP Code)

6501E.11MileRoad,Warren,MI483975000 PART I ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS TITLE PUBLICATION/FORM NUMBER DATE Operators Manual for Inland and CoastalLarge Tug (LT) 11 February 2013 TM551925273104 PAGE PARAGRAPH LINE FIGURE TABLE NO. RECOMMENDED CHANGES AND REASON

TYPED NAME, GRADE OR TITLE

TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION

SIGNATURE

DA FORM 2028, FEB 74

REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED.

APD V4.00

TO (Forward direct to addressee listed in publication) U.S.ArmyTACOMLifeCycleManagementCommand ATTN:AMSTALCLMPP/TECHPUBS

FROM (Activity and location) (Include ZIP Code)

DATE

6501E.11MileRoad,Warren,MI483975000 PART II REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS TITLE PUBLICATION/FORM NUMBER DATE Operators Manual for Inland and CoastalLarge Tug (LT) 11 February 2013 TM551925273104 PAGE NO. COLM NO. LINE NO. NATIONAL STOCK NUMBER REFERENCE FIGURE ITEM NO. NO. NO. TOTAL NO. OF MAJOR ITEMS SUPPORTED RECOMMENDED ACTION

PART III REMARKS (Any general remarks, or recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.)

TYPED NAME, GRADE OR TITLE

TELEPHONE EXCHANGE/AUTOVON, SIGNATURE PLUS EXTENSION

APD V4.00

RECOMMENDED CHANGES TO PUBLICATIONS AND BLANK FORMS


For use of this form, see AR 25-30; the proponent agency is OAASA

Use Part II (reverse) for Repair Parts and Special Tool Lists (RPSTL) and Supply Catalogs/Supply Manuals (SC/SM).

DATE

TO (Forward to proponent of publication or form) (Include ZIP Code) U.S.ArmyTACOMLifeCycleManagementCommand ATTN:AMSTALCLMPP/TECHPUBS

FROM (Activity and location) (Include ZIP Code)

6501E.11MileRoad,Warren,MI483975000 PART I ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS TITLE PUBLICATION/FORM NUMBER DATE Operators Manual for Inland and CoastalLarge Tug (LT) 11 February 2013 TM551925273104 ITEM PAGE PARAGRAPH LINE FIGURE TABLE NO. RECOMMENDED CHANGES AND REASON

TYPED NAME, GRADE OR TITLE

TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION

SIGNATURE

DA FORM 2028, FEB 74

REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED.

APD V4.00

TO (Forward direct to addressee listed in publication) U.S.ArmyTACOMLifeCycleManagementCommand ATTN:AMSTALCLMPP/TECHPUBS

FROM (Activity and location) (Include ZIP Code)

DATE

6501E.11MileRoad,Warren,MI483975000 PART II REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS TITLE PUBLICATION/FORM NUMBER DATE Operators Manual for Inland and CoastalLarge Tug (LT) 11 February 2013 TM551925273104 PAGE NO. COLM NO. LINE NO. NATIONAL STOCK NUMBER REFERENCE FIGURE ITEM NO. NO. NO. TOTAL NO. OF MAJOR ITEMS SUPPORTED RECOMMENDED ACTION

PART III REMARKS (Any general remark, or recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.)

TYPED NAME, GRADE OR TITLE

TELEPHONE EXCHANGE/AUTOVON, SIGNATURE PLUS EXTENSION

APD V4.00

RECOMMENDED CHANGES TO PUBLICATIONS AND BLANK FORMS


For use of this form, see AR 25-30; the proponent agency is OAASA

Use Part II (reverse) for Repair Parts and Special Tool Lists (RPSTL) and Supply Catalogs/Supply Manuals (SC/SM).

DATE

TO (Forward to proponent of publication or form) (Include ZIP Code) U.S.ArmyTACOMLifeCycleManagementCommand ATTN:AMSTALCLMPP/TECHPUBS

FROM (Activity and location) (Include ZIP Code)

6501E.11MileRoad,Warren,MI483975000 PART I ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS TITLE PUBLICATION/FORM NUMBER DATE Operators Manual for Inland and CoastalLarge Tug (LT) 11 February 2013 TM551925273104 ITEM PAGE PARAGRAPH LINE FIGURE TABLE NO. RECOMMENDED CHANGES AND REASON

TYPED NAME, GRADE OR TITLE

TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION

SIGNATURE

DA FORM 2028, FEB 74

REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED.

APD V4.00

TO (Forward direct to addressee listed in publication) U.S.ArmyTACOMLifeCycleManagementCommand ATTN:AMSTALCLMPP/TECHPUBS

FROM (Activity and location) (Include ZIP Code)

DATE

6501E.11MileRoad,Warren,MI483975000 PART II REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS TITLE PUBLICATION/FORM NUMBER DATE Operators Manual for Inland and CoastalLarge Tug (LT) 11 February 2013 TM551925273104 PAGE NO. COLM NO. LINE NO. NATIONAL STOCK NUMBER REFERENCE FIGURE ITEM NO. NO. NO. TOTAL NO. OF MAJOR ITEMS SUPPORTED RECOMMENDED ACTION

PART III REMARKS (Any general remarks, recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.)

TYPED NAME, GRADE OR TITLE

TELEPHONE EXCHANGE/AUTOVON, SIGNATURE PLUS EXTENSION

APD V4.00

RECOMMENDED CHANGES TO PUBLICATIONS AND BLANK FORMS


For use of this form, see AR 25-30; the proponent agency is OAASA

Use Part II (reverse) for Repair Parts and Special Tool Lists (RPSTL) and Supply Catalogs/Supply Manuals (SC/SM).

DATE

TO (Forward to proponent of publication or form) (Include ZIP Code) U.S.ArmyTACOMLifeCycleManagementCommand ATTN:AMSTALCLMPP/TECHPUBS

FROM (Activity and location) (Include ZIP Code)

6501E.11MileRoad,Warren,MI483975000 PART I ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS TITLE PUBLICATION/FORM NUMBER DATE Operators Manual for Inland and CoastalLarge Tug (LT) 11 February 2013 TM551925273104 ITEM PAGE PARAGRAPH LINE FIGURE TABLE NO. RECOMMENDED CHANGES AND REASON

TYPED NAME, GRADE OR TITLE

TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION

SIGNATURE

DA FORM 2028, FEB 74

REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED.

APD V4.00

TO (Forward direct to addressee listed in publication) U.S.ArmyTACOMLifeCycleManagementCommand ATTN:AMSTALCLMPP/TECHPUBS

FROM (Activity and location) (Include ZIP Code)

DATE

6501E.11MileRoad,Warren,MI483975000 PART II REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS TITLE PUBLICATION/FORM NUMBER DATE Operators Manual for Inland and CoastalLarge Tug (LT) 11 February 2013 TM551925273104 PAGE NO. COLM NO. LINE NO. NATIONAL STOCK NUMBER REFERENCE FIGURE ITEM NO. NO. NO. TOTAL NO. OF MAJOR ITEMS SUPPORTED RECOMMENDED ACTION

PART III REMARKS (Any general remarks, recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.)

TYPED NAME, GRADE OR TITLE

TELEPHONE EXCHANGE/AUTOVON, SIGNATURE PLUS EXTENSION

APD V4.00

By Order of the Secretary of the Army: RAYMOND T. ODIERNO General, United States Army Chief of Staff

Official: JOYCE E. MORROW Administrative Assistant to the Secretary of the Army


1300205

Distribution: To be distributed in accordance with the initial distribution number (IDN) 255651 requirements for TM 55-1925-273-10-4.

THE METRIC SYSTEM AND EQUIVALENTS


LINEAR MEASURE 1 Centimeter=10 Millimeters=0.01 Meters=0.3937 Inches 1 Meter=100 Centimeters=1000 Millimeters=39.37 Inches 1 Kilometer=1000 Meters=0.621 Miles WEIGHTS 1 Gram=0.001 Kilograms=1000 Milligrams=0.035 Ounces 1 Kilogram=1000 Grams=2.2 Lb 1 Metric Ton=1000 Kilograms=1 Megagram=1.1 Short Tons LIQUID MEASURE 1 Milliliter=0.001 Liters=0.0338 Fluid Ounces 1 Liter=1000 Milliliters=33.82 Fluid Ounces SQUARE MEASURE 1 Sq Centimeter=100 Sq Millimeters=0.155 Sq Inches 1 Sq Meter=10,000 Sq Centimeters=10.76 Sq Feet 1 Sq Kilometer=1,000,000 Sq Meters=0.386 Sq Miles CUBIC MEASURE 1 Cu Centimeter=1000 Cu Millimeters=0.06 Cu Inches 1 Cu Meter=1,000,000 Cu Centimeters=35.31 Cu Feet TEMPERATURE 5/9 (F 32) = C 212Fahrenheit is equivalent to 100Celsius 90Fahrenheit is equivalent to 32.2Celsius 32Fahrenheit is equivalent to 0Celsius 9/5 (C + 32) = F

APPROXIMATE CONVERSION FACTORS


15

TO CHANGE Inches . . . . . . . . . . . Feet . . . . . . . . . . . . . Yards . . . . . . . . . . . . Miles . . . . . . . . . . . . Square Inches . . . . Square Feet . . . . . . . Square Yards . . . . . . Square Miles . . . . . . Acres . . . . . . . . . . . . Cubic Feet . . . . . . . . Cubic Yards . . . . . . . Fluid Ounces . . . . . . Pints. . . . . . . . . . . . . Quarts . . . . . . . . . . . Gallons. . . . . . . . . . . Ounces . . . . . . . . . . Pounds . . . . . . . . . . . Short Tons . . . . . . . . Pound-Feet . . . . . . . Pounds/Sq Inch . . . . Miles per Gallon . . . . Miles per Hour . . . . . TO CHANGE Centimeters . . . . . . . Meters . . . . . . . . . . . Meters . . . . . . . . . . . Kilometers . . . . . . . . Sq Centimeters . . . . Square Meters . . . . . Square Meters . . . . . Square Kilometers . . Sq Hectometers . . . . Cubic Meters . . . . . . Cubic Meters . . . . . . Milliliters . . . . . . . . . . Liters . . . . . . . . . . . . Liters . . . . . . . . . . . . Liters . . . . . . . . . . . . Grams . . . . . . . . . . . Kilograms . . . . . . . . . Metric Tons . . . . . . . Newton-Meters. . . . . Kilopascals. . . . . . . . Km per Liter . . . . . . . Km per Hour . . . . . .

TO

MULTIPLY BY 2.540 0.305 0.914 1.609 6.451 0.093 0.836 2.590 0.405 0.028 0.765 29.573 0.473 0.946 3.785 28.349 0.454 0.907 1.356 6.895 0.425 1.609

Inches . . . . . . . . . . . . . . . . . . . . . Feet . . . . . . . . . . . . . . . . . . . . . . . Yards . . . . . . . . . . . . . . . . . . . . . . Miles . . . . . . . . . . . . . . . . . . . . . . Square Inches . . . . . . . . . . . . . . . Square Feet. . . . . . . . . . . . . . . . . Square Yards . . . . . . . . . . . . . . . . Square Miles . . . . . . . . . . . . . . . . Acres . . . . . . . . . . . . . . . . . . . . . . Cubic Feet . . . . . . . . . . . . . . . . . . Cubic Yards . . . . . . . . . . . . . . . . . Fluid Ounces . . . . . . . . . . . . . . . . Pints . . . . . . . . . . . . . . . . . . . . . . Quarts . . . . . . . . . . . . . . . . . . . . . Gallons . . . . . . . . . . . . . . . . . . . . Ounces . . . . . . . . . . . . . . . . . . . . Pounds . . . . . . . . . . . . . . . . . . . . Short Tons . . . . . . . . . . . . . . . . . . Pound-Feet . . . . . . . . . . . . . . . . . Pounds per Sq Inch . . . . . . . . . . . Miles per Gallon . . . . . . . . . . . . . Miles per Hour . . . . . . . . . . . . . . .

0.394 3.280 1.094 0.621 0.155 10.764 1.196 0.386 2.471 35.315 1.308 0.034 2.113 1.057 0.264 0.035 2.205 1.102 0.738 0.145 2.354 0.621

TO

MULTIPLY BY

1 CM. 2

INCHES

Centimeters . . . . . . . . . . . . . . . . . Meters . . . . . . . . . . . . . . . . . . . . . Meters . . . . . . . . . . . . . . . . . . . . . Kilometers . . . . . . . . . . . . . . . . . . Square Centimeters . . . . . . . . . . Square Meters . . . . . . . . . . . . . . . Square Meters . . . . . . . . . . . . . . . Square Kilometers. . . . . . . . . . . . Square Hectometers . . . . . . . . . . Cubic Meters . . . . . . . . . . . . . . . . Cubic Meters . . . . . . . . . . . . . . . . Milliliters. . . . . . . . . . . . . . . . . . . . Liters . . . . . . . . . . . . . . . . . . . . . . Liters . . . . . . . . . . . . . . . . . . . . . . Liters . . . . . . . . . . . . . . . . . . . . . . Grams . . . . . . . . . . . . . . . . . . . . . Kilograms. . . . . . . . . . . . . . . . . . . Metric Tons . . . . . . . . . . . . . . . . . Newton-Meters . . . . . . . . . . . . . . Kilopascals . . . . . . . . . . . . . . . . . Kilometers per Liter . . . . . . . . . . . Kilometers per Hour . . . . . . . . . .

13

14

11

12

10

PIN: 087332-000

Potrebbero piacerti anche