Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Packaging Recipe
Packaged/Sequenced By: Date: Application Name: Application Vendor: Installation Source: Content Folder location Sequencer Version (only if using Softgrid or AppV): Sequencer OS/Service Pack:
Luis Eduardo Jardon Cubos. November 22, 2011 Enervista v.5.01 GE Multilin Inc \\file001\App_Lib\DML\GE Multilin Inc\Enervista 5.01\Media \\softprd001\content\Enervista501-TEST 3.2.1.9 XP SP3
Use the box below to record application specific step by step installation and configuration instructions. 1. Browse to the media location and click Enervista501.exe (Installation media can be found at: \\file001\app_lib\DML\GE Multilin Inc\Enervista 5.01\Media
3. Click Next
6. Click Next
To Install 269 Plus Motor Management Relay 1. Browse to the media location and double-click on 269setup607.exe
3. Click Continue with 269PC version 6.07 installation . You may need to minimize the installation screen if this box is not visible
To install 350 Feeder Protection Relay 1. Browse to the media location and double-click on SR3Setup141.exe
2. Click Run
To Install 369 Motor Management Relay 1. Browse to the media location and double-click on 369Setup400.exe
2. Click Run
2. Click Run
Installation Procedure for 735/737 Feeder Relay 1. Browse to the media location and double-click on 735setup200.exe
5. Click Next
Installation Procedure for 745 Transformer Management Relay 1. Browse to the media location and double-click on 745setup520.exe
2. Click Run
Installation Procedure for 750/760 Feeder Management Relay 1. Browse to the media location and double-click on 750Setup730.exe
2. Click Run
2. Click Run
3. Click Next
6. Click Install
7. Click Next
2. Click Run
4. Click continue with RTDPC version 1.51 installation. You may need to minimize the setup screen to view this window
Installation Procedure for UR Family of Protection Relays 1. Browse to the media location and double-click on ursetup590.exe
2. Click Run
5. Click Next
7. Click Next
9. Click Next
Installation Procedure for MM300 Motor Management System 1. Browse to the media location and double-click on mm300Eng160.exe
2. Click Run
3. Click Next
7. Click Next
Installation Procedure for MM2 Motor Management System 1.-Access to the media folder and execute the mm2setup512.exe.
3.-Click Next.
4.-Click Yes.
6.-Click Next.
7.-Click Finish.
Post-Installation
Perform final review prior to saving Package. Record any additional information or actions that may be required: All setup shortcuts can be removed as they can be accessed from the Enervista Launchpad application