Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CRANE ITEM
Wire Rope Cracked or Worn Sheave or Drum Limit Switch (Anti-Two Blocking) Boom Master Clutch Steering Clutches Hydraulic Pump Hydraulic Controls Hydraulic Hoses Mechanical Controls Drive Chains Swing Clutches
DEFECT
OK
NA
NO.
13 14
CRANE ITEM
Hoist Clutch Lining Hoist Drum Brake Bands Open Gears Boom Jib (as applicable) Carrier Items Steering Gears and Connections Brakes (service and hand) Tires and Wheels Lubrication OPERATING TEST OVERALL CONDITION
DEFECT
OK
NA
15
4 5 6 7 8 9 10 11 12
16 NO 1 2 3 4
DEFECT
OK
NA
6.1/12911e061.pdf
(12/2007)
Page 2 of 4
4. 5.
6.
7.
8. 9.
6.1/12911e061.pdf
(12/2007)
Page 3 of 4
DEFECTIVE/OK/NA a. Rope diameter: (Previous) b. c. d. e. Wear Kinks Broken wires Other signs of deterioration
(Present)
Visually inspect the rope drum for: a. Wear b. c. d. Deformation Deterioration Have qualified inspector perform nondestructive tests on hook by visual examination, liquid penetrant examination, or magnetic-particle examination. Acceptance: No cracks, linear indications, laps, or seams.
Hooks with any distortion causing an increase in the throat opening of 5% not to exceed of original throat opening, hooks with any visible bend or twist from the original plane of the hook, and hooks having any wear exceeding 10% of original must be replaced. Lubricate hook bearing and latch pin, as applicable. Establish three marks; A, B, and C, with a center punch. For ease in measuring, set distances on an even number of inches. BEFORE LOAD TEST Length AB Length BC in _in
After Load Test Length AB Length BC Check for: 1. Wear and deformation 2. Cracks and twisting 3. Signs of opening between Point A and Point B in in
6.1/12911e061.pdf
(12/2007)
Page 4 of 4
BLOCK WEIGHT
lb.
TEST WEIGHT
lb.
ft.
PARTS LINE
quantity
BOOM LENGTH
ft.
Qualified Inspector
Operated By
Remarks:
6.1/12911e061.pdf
(12/2007)