Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CONSTRUCCIONESTecniMontajes.
CALCULATINGASTORAGETANKFORAPI 650
Customer
TAG
GASMOTOR
Description Preparedfor review. Date 04/03/2013 Review A Elaborated ERM Revised Approved Comments
Filename: Calculo Gas Motor Tank 3000 Analysis: API-650 Tank DESIGN CALCULATION
API-650 Code Version: Addendum 3: Analysis Performed by: Job File: Date of Analysis:
2007 August 2011 Consultora y Diseo CoDis. C:\Documents\Gas Motor March 04, 2013
Filename: Calculo Gas Motor Tank 3000 Analysis: API-650 Tank Table of Contents
General Tank Data.................................................................................................................. 4 Tank Shell Course Materiales......................................................................................... 6 Wind Data.......................................................................................................................................9 API-650 ROOF DETAILS SPECIFICATION......................................................................... 10 API-650 SEISMIC DATA (App E.)..................................................................................... 11 Wind Information................................................................................................................... 13 MATERIAL PROPERTY INFORMATION..................................................................................... 14 SHELL COURSE ALLOWED FLUID HEIGHTS......................................................................... 15 BASE PLATE DETAILS - SHELL WEIGHT & CENTER OF GRAVITY.........................16
WIND OVERTURNING STABILITY CHECK.............................................................................. 17 WIND GIRDER INFORMATION................................................................................................... 18 WEIGHT SUMMARY......................................................................................................................... 19 Sismic Evaluatin Results Appendix E...................................................................24 Anchor Bolt Details Section 5.12........................................................................ 27 API-2000 5tk Venting Requirements.......................................................................... 29 Recommendations....................................................................................................................... 30
Tank Nominal Diameter [D] Tank Shell Height [HTK] Design Liquid Level [H] Liquid Specific Gravity [G] Weight of Attachments/Structures Distance down to Top Wind Girder Joint Efficiency (App A or 653) [E] Wind Velocity
(ft.) 27.500 (ft.) 30.000 (ft.) 30.000 0.68000 (lb.) 0.00000 (ft.) 0.00000 1.0000 (mph) 62.137
Filename: Calculo Gas Motor Tank 3000 Analysis: API-650 Tank Insulation Thickness Insulation Density (in.) 0.00000 (lb./cu.in.) 0.00000
Yes Yes
Shell Course # 1 Corrosion Allowance [CA] Shell Course # 2 Height Shell Course # 2 Thickness
Shell Course # 2 Corrosion Allowance [CA] Shell Course # 3 Height Shell Course # 3 Thickness
Shell Course # 3 Corrosion Allowance [CA] Shell Course # 4 Height Shell Course # 4 Thickness (ft.)
Shell Course # 4 Corrosion Allowance [CA] Shell Course # 5 Height Shell Course # 5 Thickness
Shell Course # 2 Material Name Shell Course # 2 Design Stress [Sd] Shell Course # 2 Hydro Test Stress [St] Shell Course # 2 Minimum Yield Stress Shell Course # 2 Minimum Tensile Stress Shell Course # 2 Maximum Shell Course # 2 Material Shell Course # 2 Material
A-283 (lb./sq.in.) 20000. (lb./sq.in.) 22500. (lb./sq.in.) 30000. (lb./sq.in.) 55000. (in. ) 1.0000 C 1
Shell Course # 3 Material Name Shell Course # 3 Design Stress [Sd] Shell Course # 3 Hydro Test Stress [St] Shell Course # 3 Minimum Yield Stress Shell Course # 3 Minimum Tensile Stress Shell Course # 3 Maximum
A-283 (lb./sq.in.) 20000. (lb./sq.in.) 22500. (lb./sq.in.) 30000. (lb./sq.in.) 55000. (in. ) 1.0000
Filename: Calculo Gas Motor Tank 3000 Analysis: API-650 Tank Shell Course # 3 Material Shell Course # 3 Material C 1
Shell Course # 4 Material Name Shell Course # 4 Design Stress [Sd] Shell Course # 4 Hydro Test Stress [St] Shell Course # 4 Minimum Yield Stress Shell Course # 4 Minimum Tensile Stress Shell Course # 4 Maximum Shell Course # 4 Material Shell Course # 4 Material
A-283 (lb./sq.in.) 20000. (lb./sq.in.) 22500. (lb./sq.in.) 30000. (lb./sq.in.) 55000. (in. ) 1.0000 C 1
Shell Course # 5 Material Name Shell Course # 5 Design Stress [Sd] Shell Course # 5 Hydro Test Stress [St] Shell Course # 5 Minimum Yield Stress Shell Course # 5 Minimum Tensile Stress Shell Course # 5 Maximum Shell Course # 5 Material Shell Course # 5 Material
A-283 (lb./sq.in.) 20000. (lb./sq.in.) 22500. (lb./sq.in.) 30000. (lb./sq.in.) 55000. (in. ) 1.0000 C 1
ANCHOR BOLT DETAILS Anchor Bolt Diameter (optional) Threads per Unit Length Bolt Allowable Stress Number of Anchor Bolts (optional) (in.) 2.7500 (1/in.) 8.0000 (lb./sq.in.) 20000. 14.000
Filename: Calculo Gas Motor Tank 3000 Analysis: API-650 Tank Bolt Yield Stress Bolt Offset from Mean Tank Diameter (lb./sq.in.) 36000. (ft.) 0.00000
Wind Data
Kz parameter Kzt parameter Kd parameter Importance Factor (I) Gust Factor (G) 1.0400 1.0000 0.95000 1.0000 0.85000
(1=Supt Cone 2=Rafter Supt Cone 3=Cone 4=Dome 5=Umbrella) Angle Between Roof and Horizontal Net Area at Roof/Shell Junction [A] Thickness of Roof Plate Roof Plate Corrosion Allowance Weight of Snow on Roof Roof Live Load (deg) 5.3000 (sq.in.) 4.8035 (in.) 0.18750 (in.) 0.62500E-01 (lb.) 0.00000 (lb/ft2) 20.000
---/ For General Roof, No Design /--Weight of Roof Plates Weight of Roof Framing Pct of Weights Supported by Shell (lb.) 0.00000 (lb.) 0.00000 0.00000
---/ For Supported Cone Roof Design /--Preferred Rafter Type (W, WT, S, C) Preferred Girder Type (W, WT, S, C) C W
Preferred Column Type (W, WT, S, C, DC, DI, P ) P Roof Plate Material Roof Plate Allowable Design Stress Structural Member Material Structural Member Allowable Design Stress Maximum Allowed Rafter Length Maximum Allowed Girder Length Center Column Cap Plate Diameter A-36 (lb./sq.in.) 23200. A-36 (lb./sq.in.) 23200. (ft.) 20.000 (ft.) 20.000 (ft.) 3.0000
10
Spectral Acceleration Adjustment Coefficient (K) 1.0000 Scaling Factor (Q) Transtiional Period (TL) 1.0000 2.4000 0.00000 1.0000 0.00000 0.00000
Mapped maximum earthquake for short periods (Ss) Mapped maximum earthquake for 1 sec periods (S1) Mapped maximum earthquake for 0 sec period Non-ASCE peak ground acceleration (Sp) (S0)
ASCE short period design acceleration parameter (SDS) 0.00000 --- Site Specific Data --Spectral acceleation parameter at 0 period (Sa0*) Spectral acceleation parameter at any period (Sa*) 1.5750 0.49900
11
Filename: Calculo Gas Motor Tank 3000 Analysis: API-650 Tank API-2000 Venting Requirements Emptying Filling Liquid Flash Liquid Boiling Point (cu. ft./hour)5614.6 (cu.ft./hour)5614.6 (F )-40.000 (F )100.00 1.0000
ROOF_PROJECTION_IN_WIND_MOMENT= SHELL_THICK_CONVERG_TOLERANCE= GENERATE_MESSAGE_FILE= COSINE_CURVE_TOLERANCE= COSINE_CURVE_ITERATION_LIMIT= WIND_GIRDER_SHELL_THICKNESS= SHELL_SETTLEMENT_METHOD= CORRODED_NOZZLES= 653_CORRODED_HYDROTEST_CASE= THICKNESS_ROUNDUP_TO_NEAREST= PLATE_MATERIAL_DENSITY= MODIFY_FLUID_HEIGHT_BY_PRESSURE= ROUND_ANCHOR_BOLTS_BY= WIND_MOMENT_IN_APP_F FULL_SHELL_WEIGHT_IN_APP_F
YES 0.49999999E-02 in. YES 0.30000001 100.00000 MAX FOURIER_SERIES NO NO 0.00000000 in. 0.28360000 lb./cu.in. NO 4.0000000 Sect_5.9.7.1 YES
12
Wind Information.
Wind Velocity Velocity Factor Wind Pressure Area Exposed to Wind Sect 5.9.7.1 Wind Moment on Tank Wind Shear Force Acting on Tank (mph) 62.137 0.26813 (lb./sq.in.) 0.92366E-01 (ft.**2) 842.54 (ft.lb.) 0.17169E+06 (lb.) 11206.
13
The following material properties have been modified in accordance with API-650 (and API-653 where applicable).
Course Number
Material Name
App M Reduction
(lb./sq.in.) (lb./sq.in.) 1 2 3 4 5 A-283 A-283 A-283 A-283 A-283 20000. 20000. 20000. 20000. 20000. 22500. 22500. 22500. 22500. 22500. 1.0000 1.0000 1.0000 1.0000 1.0000
SHELL COURSE THICKNESS DATA - One Foot Method Thickness Values for Three Cases COURSE DESIGN (in. ) TEST (in. ) MIN TEMP USER (in. ) (deg F ) Status
1 2 3 4 5
NA NA NA NA NA
14
1 2 3 4 5
Maximum allowed fluid height of entire tank for: Design Thickness Case Test Thickness Case (ft.) 58.419 (ft.) 66.003 (ft.) 32.121
15
CENTER OF
(in.) 0.31250
(from API-650 Table 5-1 plus corrosion) Annular Base Plate Width per 5.5.2 (in.) 28.327
( 2 + ThkCrs1 + max[ 24, (390tb / sqrt(HG))] ) Weight of Shell + Nozzles Total Weight of all Nozzles Center of Gravity (Shell+Nozzles) (lb.) 21169. (lb.) 0.00000 (ft.) 14.250
16
17
(ft.) 236.22
18
WEIGHT SUMMARY
-------------Shell (Corroded) (lb.): Shell (Non-Corroded) (lb.): Annular Base Plate (lb.): Bottom Plate (lb.): Nozzles (lb.): Roof Plates (lb.): Roof Framing/Structure (lb.): Shell Attachments (lb.): Insulation (lb.): Operating Fluid (lb.): Water Weight (lb.): Operating Weight (Non-Corroded) (lb.): Test Weight (Non-Corroded (lb.): Empty Weight (Non-Corroded) (lb.): 14554. 21169. 2411. 6212. 0. 4568. 1404. 0. 0. 755166. 1110538. 790930. 1146302. 35764.
19
Total weight of Roof Plates ...........(lb. 4567.6 (Based on user input thickness)
):
User Specified Design Roof Load .......(lb./sq.in.): 0.19206 (including user plate thickness)
Computed Number of Rafter Rings: Rafter Details from Tank Center RING Number Outer Spacing (in.) 1 16 64.795 ( 0) NUM/ GRDR Inner Spacing (in.) 0.000 ( 0) NUM/ GRDR Max
Rafter Size Details from Tank Center RING Rafter Load (lb./in.) Selected Shape --Section Modulus-Required (in.**3) 1 6.566 C3X4.1 0.77 Actual (in. **3) 1.10 20
Column Size Details (from center, Ring 0) RING Column Load (lb.) 0 9260.5 Column Height (ft.) 31.28 Allow Comp Stress (lb./sq.in.) 10523.3 Required Radius of Gyration (in.) 2.085
RING
Num
Selected Shape
P6_STD
1659.6
Rafter Ring
Actual Shear
Allowable Shear
Status
Actual
Status
Starus
Actual Shear
Allowable Shear
Status
Actual Bending
Allowable Bending
(lb./sq.in.) (lb./sq.in.)
(lb./sq.in.) (lb./sq.in.)
Column
Actual
Allowable
Status
21
Filename: Calculo Gas Motor Tank 3000 Analysis: API-650 Tank Ring Compression Compression
ROOF WEIGHT SUMMARY Weight of Roof Plates (lb.): Weight of Roof Rafters (lb.): Weight of Roof Girders (lb.): Weight of Roof Columns (lb.): TOTAL Roof Weight (lb.): 4567.6 810.57 0.00000 593.92 5972.1
ROOF EVALUATIONS - Appendix F Uplift force due to internal pressure (lb.): Total weight resisting uplift (lb.): 53456. 25025.
1.2444
22
Filename: Calculo Gas Motor Tank 3000 Analysis: API-650 Tank Compression Ring Failure Pressure (in of H2O): Compression Ring Failure Pressure (lb./sq.in.): (According to F.6) 1.3911 0.50232E-01
NOTE, this tank requires an Anchored Base !!! Per F.7, allowed pressure is: (lb./sq.in.): 2.5000
Required Compression Areas, Roof/Shell Junction Area as per Section F.5 (in.**2): 4.6066
FRANGIBLE ROOF-TO-SHELL JUNCTION AREA LIMIT Area as per Section 5.10.2.6 (in.**2): 1.1570
23
0.75517E+06
Sp -design level peak accel for nonASCE Ss -MCE at period of 0.2 seconds S0 -MCE at period of 0.0 seconds S1 -MCD at period of 1.0 seconds SDS-design spectral accel parameter
FA -acceleration based site coefficient FV -velocity based site coefficient TS - FvS1 / FaSs TC -convective sloshing period (sec)
Ac -convective spectral accel parameter Ai -impulsive spectral accel parameter Wc -effective convective fluid weight(lb. Wi -effective impulsive fluid weight (lb. Vc -convective liquid base shear Vi -impulsive liquid base shear V -total design base shear (lb. (lb. (lb. (lb. ) ) ) ) ) )
VS -shear resistance
24
Xc -ring wall convective moment arm Xi -ring wall impulsive moment arm XCS-slab convective moment arm XIS-slab impulsive moment arm WS -shell+appurtenances weight Wrs-roof, framing 10% snow weight Mrw-ringwall overturning moment Ms -slab overturning moment
) ) ) ) ) ) ) )
(ft.lb. (ft.lb.
0.00000 0.68000
(lb./in.)
wt -tank + roof weight at shell base (lb./in.) J L -the anchorage ratio -reqd min annular plate projection (ft. )
0.00000
25
Filename: Calculo Gas Motor Tank 3000 Analysis: API-650 Tank Height of sloshing wave (ft. Required Freeboard (ft. ) ) 0.00000 0.00000
Course
Seismic Evaluation Summary. Seismic shell stress check failed. Base shear exceeds the limit. Hoop stress within allowable.
26
Case
Uplift (lb.)
Load/Bolt (lb.)
Design Pressure: Test Pressure: Failure Pressure: Wind Loading: Seismic OPE: Design Press+Wind Load: Design Press+Seismic OPE: Frangibility Pressure:
Case
Design Pressure: Test Pressure: Failure Pressure: Wind Loading: Seismic OPE:
14 14 14 14 14
0. 459. 0. 0. 25424.
27
Filename: Calculo Gas Motor Tank 3000 Analysis: API-650 Tank Design Press+Wind Load: Design Press+Seismic OPE: Frangibility Pressure: 14 14 14 2.750 2.750 2.750 0. 25444. 0.
Final Anchor Bolt Spacing (ft. ) Specified number of user bolts is sufficient. Specified user bolt diameter is sufficient.
6.17
28
OUT-BREATHING: For Thermal Effects, Required Air Volume (cu ft./hr): For Liquid Movement (filling rate) (cu ft./hr): 3398.0 12000.0
EMERGENCY VENTING DUE TO FIRE Sect 4.3.3.2.2 Eq.2A, Required Air Volume (cu ft./hr):697112.3 Wetted Area (sq ft.): Tank Capacity (cu ft. ): 2591.8 19078.6
29
Recommendations
Not find the design temperature. The design pressure set by experience. Please check. The specific gravity of the gasoline engine was taken as 0.68. Please check. In the information provided was not found speed Wind. It takes 100 km / h according NSR-10 The results of the diameter of the anchors depend on the internal pressure, earthquake, wind and slenderness. The equipment is manufactured according chose reference information. The calculation will include links back to the development of the general plan of the tank.
30