Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
End-to-end ow assurance
There are many ways of approaching the ow assurance issue in offshore pipelines. One of the most commonly used is to apply specially-designed ow assurance coatings on the pipe and eld joint area. Most of the industrys ow assurance coating providers use a one size ts all approach by offering only certain types of ow assurance coatings regardless of the project parameters water depth, maximum operating temperature, installation method or only linepipe coatings, which leaves the eld joint coating falling under the scope of another subcontractor. This can create longterm issues for the pipeline operator, such as suboptimal
33
the end-to-end coating approach through the development of an injection-moulded eld joint coating that is perfectly compatible with the linepipe coating and that offers equivalent long-term thermal performance.
operated by a dedicated team of Bredero Shaw coating and engineering experts trained in continuous improvement practices and supported by regional operations resources for safe and timely manufacturing and delivery. The plant set-up and coating project execution are based on standard operating practices that are an integral part of the company-wide ShawCor Manufacturing System (SMS). A Brigden mobile plant has the same production capability as a xed plant. Brigden is capable of coating pipe with an outside diameter of 220 to 1066 mm (8-42 in), lengths of 10.4-24.4 m (34-80 ft) and weight up to 484 kg/m (325 lbs/ft). The plant comes fully equipped with integrated facilities for raw materials storage, facility maintenance, and quality control and testing. All phases of the Brigden coating operation, including surface preparation, pre-heat, coating application and nal inspection can be conducted in an enclosed area of 1,700 square m (18,000 square ft). A total area of 1.2 ha (2.8 acres) is needed to set-up the entire facility, excluding pipe storage requirements. For the eld joints, Bredero Shaws Field Joint Center of Excellence is using the most advanced technologies to develop portable and automated eld joint coating equipment that can ensure the consistency and quality of the end-to-end ow assurance coating system, while enhancing operator safety and reducing the operational footprint in the eld. Our eld joint coating equipment, materials and operators can be quickly mobilized to any onshore or offshore location. Bredero Shaw offers to global operators and contractors the widest range of thermal insulation eld joint coatings in the industry to complement our factory-applied coatings, including the high-performance Thermotite IMPP and Thermotite ULTRA eld joint systems previously discussed.
Contact information
Head Ofce and Americas: +1281-886-2350 Europe, Middle East, Africa and Russia: +44-208-622-3071 Asia Pacic: +65-6732-2355 solutions@brederoshaw.com www.brederoshaw.com
Anti-corrosion and ow assurance Brigden is our innovative modular, mobile plant capable of applying our full range of anti-corrosion and ow assurance coatings.
Protection and weight We can set up our mobile concrete coating plants close to your project, signicantly reducing logistics cost associated with heavy concrete coated pipe.
Field joints Our eld joint coating solutions ensure the high consistency and quality that are critical to the long-term integrity of your pipeline system.
brederoshaw.com
shawcor.com