Sei sulla pagina 1di 13

Explore the Flash Card by connecting the Flash card reader with your laptop

Flash card to be used may/may not have some SW on it. Erase if any SW is loaded on it

Now the Flash Card is ready to be loaded with the desired SW

Open the IDB and click Configuration .Explore and click on Load Flash Card

This window will open

Click on Browse to specify the location of Flash card and Select the specified location

Click on IDB in RAM .Then click CREATE

Create IDB for that particular site

Select the desired configuration (e.g 3x4)for that particular RBS

Click RBS SW on disk and Browse for the location where you have kept the SW

Select the location of the RBS SW to be loaded in the flash card

Click on Load .. Now the Flash Card is ready for use

The Flash card will be loaded with the desired SW

Potrebbero piacerti anche