Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Step 1 Place pegs in a circular pattern working in the second circular row from the center. Leave an empty space in between each of the pegs.
Step 2 Cut a piece of wire 6 inches long. Place one end of the wire between the top and left peg. Bend the wire to a right angle.
Step 4 After wrapping the wire completely around the top peg, bring the wire down
Step 5 After wrapping the wire completely around the peg, bring the wire down around
Step 6 After wrapping the wire completely around the peg, bring the wire up around the bottom peg.
around the next peg to the next peg to the the right. right.
Step 11
Step 12
wire completely around the last peg, bring the wire up around the top peg again.
the top peg. This will create a second loop around the top peg.
of the wig jig. Use your wire cutters to cut off the end of the wire. This will leave a simple loop on one side of the form.
Step 13 Close the loop by moving the open side of the loop back until the loop is closed
13 for the other side of and link them together the wire form. for a necklace, bracelet or earrings. Also, try hanging beads off of loops.