Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
To shape the spigot ends, the spigot forming ring is first applied
with its dead weight only (free load), hence allowing even distri-
bution of the concrete. A hydraulic superimposed load may be
added as needed. The spigot end is smoothed by the oscillating
rotary movements of the spigot forming ring. The result: Per-
fectly and precisely shaped spigot ends suitable even for gaskets
designed for narrow tolerances.
Demoulding
The pipes remain inside their mould jackets while be-
ing transported to the demoulding area to ensure their
dimensional accuracy. Hydraulic cylinders are optional
available as demoulding aids to reduce crane load.
Operation
Easy operation requiring only two operators maximum,
including crane operator. The use of a bridge crane is
recommended for mould handling.
Control
Control is a Siemens S7 PLC. All production parameters
for every pipe size can be stored. The frequency
(optionally) is adjustable and modifiable, depending on
filling height.
����
����
����
����
���
Technical data:
Type: SP VARIANT
Model ranges: 1500 2500 3600 6000
A 12400 17000 22000 29000
B 4600 5800 7100 8520
C 1510 2110 3170 6300
D 3870 5670 5290 4730
H 3730 3730 3730 3930
T* 4270 4270 4270 4270
*for 3.0m laying length Right of technical modifications reserved
SCHLOSSER-PFEIFFER GmbH
Scheidertalstrasse, Tor 4
D-65326 Aarbergen