Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CC-300
CONCRETE COMPRESSION
TESTING MACHINE
Capacity: 300,000 lbf (1334 kN)
Benefits:
❖ Rigid frame for greater accuracy and safety.
Application:
Compression testing of specimens—from high-strength
concrete to weak mortar—with greater accuracy than
required for ASTM C 39.
Standard usage: 6 x 12 in (152 x 305 mm) cylinders
With accessories: Load Frame, Model CC-300, shown fitted with optional
• 2 x 2 in (51 x 51 mm) cubes Premium load indicator, Model CC-150.
Specimen 602683 602694 602687 602684 602633 602621 602636 602924 602634
Spherical Seat Spherical Seat
Cube Riser Set Spacer, Top, Spacer, Top, Spacer, Top, Spacer Platen, Spacer, Top,
Ass'y Spigot Ass'y,
2x2 2x4 3x6 4x8 1 Inch 6 x 6 Cube
3x6/2x2 6 x 6 Cube
13.0 lb 51.0 lb 4.0 lb 2.75 lb 32.0 lb 1.0 lb 18.0 lb 36.5 lb 47.5 lb
Weight
(5.9 kg) (23.1 kg) (1.8 kg) (1.25 kg) (14.5 kg) (0.45 kg) (8.2 kg) (16.6 kg) (21.5 kg)
2 x 2 Cube
a Recommended
2 x 4 Cyl W/CC
b
2 x 4 Cyl W/PC
3 x 6 Cyl W/PC
4 x 8 Cyl W/PC
6 x 6 Cube
Accessories
Flexural Strength Test Beam Attachment, C-170 Concrete Cylinder
ASTM* C 293, C 78 Compressometer/Extensiometer, C-194
AASHTO* T 97 ASTM C 469
* See Standards Buyer's Guide in Section 9 of our catalog.
Measures the average deformation and strain of a 6 x 12 in
May be mounted on a (15.2 x 30.5 cm) concrete cylinder sample during compres-
CC-300 Load Frame to sion testing.
allow flexural strength
testing of beams. The Strain in both length and diameter is measured by two dial
upper load member indicators mounted at 90° angles. It consists of an aluminum-
attaches directly to the magnesium frame with mounting and central points made
upper platen of the from steel and stainless steel control rods. The stan-
Load Frame, while the dard gauge length is 6 in
lower member fits over (15.2 cm). Dial indicators
the bottom platen. have a range of ±0.2 in with
0.0001 inch graduations.
The attachment is made from high strength structural steel
for accurate and reliable testing. Contact DGSI for as- A single-gauge Concrete
sistance in using this unit with load frames made by other Cylinder Compressometer
manufacturers. (model C-190) is also avail-
able. It may be obtained
Block Platen Assembly, 602732 from DGSI in other sizes
For testing block samples up to and adapted to use linear
8 x 8 x 16 in (203 x 203 x 406 mm). transducers and digital
Not to be used for prism testing. readouts as special order Concrete Cylinder Compressometer/
items. Extensiometer, Model C-194.
WinCom features:
• Eliminates data entry errors. • Transfers data in ASCII comma-delimited format.
• Helps safeguard data. • Launches application of your choice automatically.
• Easy-to-use and inexpensive.
WinCom Plus (CC-15010): WinCom Plus is an enhanced version of WinCom, allowing you to automatically capture and upload
test results. Provides simple plotting programs to verify that tests are being run according to ASTM specifications.
Durham Geo Slope Indicator ISO © 2007 Durham Geo Slope Indicator. Products, materials,
2175 West Park Court, Stone Mountain, GA 30087, USA 9001:2000 specifications, or prices subject to change without notice.
Tel: 800.837.0864 or 770.465.7557 www.DGSI.info QMS Printed in USA. (Ref: CC-300 - Oct 07 rev4)