Sei sulla pagina 1di 59

EOTech

Laser Marksmanship Training Systems Interoperable Deployable Communications Systems

TABLE OF CONTENTS

This material is L-3 EOTech general capabilities information and does not contain any controlled technical data as defined within the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR).

LMTS - Laser Marksmanship Training Systems

L-3 EOTech provides both the Laser Marksmanship Training System (LMTS) family of small arms marksmanship training devices which help qualified instructors and individual shooters build strong firearms handling and marksmanship skills and the SHERPA family of Interoperable Deployable Communication Systems that meet your emergency communications needs disaster recovery, emergency management, continuity of operations, and rapid infrastructure.

L-3 EOTech is fully committed to meeting and exceeding the needs of its customers both in the U.S. and abroad by offering the highest quality products and services.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

Table of Contents

LMTS - Laser Marksmanship Training System


110 System.............................................................................. 5 115 System.............................................................................. 5 115A System............................................................................ 6 115 Patrol Kit...........................................................................6 190-1 System...........................................................................8 190-3 System...........................................................................8 360 System............................................................................ 10 365 System............................................................................ 11 460 System............................................................................ 12 130 System............................................................................ 14 130 Warrior Kit...................................................................... 14 390v6 System........................................................................ 16 390v6 Linked System............................................................. 16 Sniper Training System v2..................................................... 18 Mini-RETS System.................................................................. 20 Wireless LCCATS................................................................... 22 Wireless Repeater Assembly.................................................. 22 Multi-Use Target - ALT-C........................................................ 24 Multi-Use Target - TRQC......................................................... 25 Multi-Use Target - MGTS-Army............................................... 26 Multi-Use Target - MGTS-Air Force......................................... 27 Multi-Use Target Optional Packages....................................... 28 M16 Blank Firing System........................................................ 31 M4 Blank Firing System.......................................................... 31 M240 Blank Firing System...................................................... 31 M249 Blank Firing System...................................................... 32 M16 Non-Gun Firing System................................................... 32 M9 Blank Firing System.......................................................... 32

LMTS - Components & Accessories


Laser Marksmanship Training System Kits.............................33 Carrying Cases....................................................................... 35 System Cables........................................................................ 37 System Accessories................................................................ 37 Laser Transmitter Brackets.................................................... 38 Laser Transmitter Rods.......................................................... 39 Laser Transmitters................................................................. 40 Laser Accessories & Batteries................................................ 42 Laser Alignment Devices........................................................ 43 LMTS Manuals....................................................................... 44 TR-700 Target Mask Sets....................................................... 45 TR-900 Target Overlays......................................................... 46 Multi-Use Target Overlays...................................................... 48 Power Supplies...................................................................... 49 Scoring Device & Accessories................................................. 49 System Software.................................................................... 49 LMTS Targets........................................................................ 50 SafeShot Barrels & Upper Receivers..................................... 53 SafeShot Blanks..................................................................... 55

LMTS - Equipment Training

New Equipment Training........................................................ 56


Interoperable Deployable Communications Systems

SHERPA Expedition............................................................. 58
SHERPA Traveler................................................................. 58

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

LMTS - Laser Marksmanship Training Systems

110 & 115 System

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

LMTS - Laser Marksmanship Training Systems

110 System

[MDM1001]

The 110 System is designed to provide the shooter with visual and audible feedback while building repetitive shooting skills and muscle memory, vital for accuracy. The core of this system is built around the TR-700 target, a mobile, self-contained targeting component that can operate on either AA batteries or AC power adapter. Used by recreation, law enforcement and the military, the system takes shooters from the fundamentals of shooting all the way to combat survival skills.

System Components
TR-700 Target LT-100C Laser Mask Set: Regular LR44 batteries (Set of 4) Allen Wrench Power Supply 110 System Manual Cardboard Box

115 System

[MDM1003A]

The 115 System (with Military Mask Set) uses L-3 EOTechs in-barrel handgun laser, the LTX-Z. The LTX-Z requires a minimum three inch barrel. The LTX-Z fits a wide assortment of handguns, including .38, 9mm, .357, .40, .44, and .45 caliber weapons. It allows shooters to work on their presentation from the holster in addition to use in routine marksmanship training. This system is built around the TR-700 target. A remote cable can be purchased separately to activate the timer and clear the hit counter on the TR-700 at a distance.

System Components
TR-700 Target LTX-Z Laser (w/ accessories) Mask Set: Military 115 System Manual Power Supply Cardboard Box

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

LMTS - Laser Marksmanship Training Systems

115A System

[MDM1105]

The 115A System (with Regular Mask Set) uses L-3 EOTechs internal laser, the LTX-Z. The LTX-Z requires a minimum three inch barrel. The LTX-Z fits a wide assortment of handguns, including .38, 9mm, .357, .40, .44, and .45 caliber weapons. It allows shooters to work on their presentation from the holster in addition to use in routine marksmanship training. This system is built around the TR-700 target. A remote cable can be purchased separately to activate the timer and clear the hit counter on the TR-700 at a distance.

System Components
TR-700 Target LTX-Z Laser (w/ accessories) Mask Set: Regular 115 System Manual Cardboard Box Power Supply

115 Patrol Kit

[MDM1005]

The 115 Patrol Kit allows law enforcement professionals the opportunity to conduct essential marksmanship training utilizing their own firearm, while on the go and without the need for a range. Contained in a compact bag, the Patrol Kit can be set up anywhere indoors or outdoors. Through repetitive use, the Patrol Kit builds muscle memory, target acquisition skills and assists in reinforcing the fundamentals of marksmanship such as aiming, sight alignment, breath control and trigger control. The system can simulate various distances by adding the different target masks or can be used for quick aim drills, timed drills and movement drills. Filling a vital need in marksmanship training, the Patrol Kit will build and sustain perishable skills that help the law enforcement professional when confronted with the ultimate decision.

System Components
TR-700 Target Reflective Target - Mini 25M LTX-Z Laser (w/ accessories) RC-260 remote cable Mask Set: Regular Power Supply (4) AA Batteries 115 Patrol Kit Manual Carrying Case: Warrior (soft)

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

LMTS - Laser Marksmanship Training Systems

190 System

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

LMTS - Laser Marksmanship Training Systems

190-1 System [MDM1200]


The 190-1 System is a self-contained single-shooter system that gives immediate feedback. It supports training with any weapon that accommodates the systems commercial laser (rifle, pistol, shotgun). Hits on the paper targets are captured by the camera in real-time and displayed on the shooters personal computer (not included). Transmitter rods in a variety of sizes are required for the systems commercial laser and are sold separately.

System Components
Carrying Case 190 Camera Bracket Camera:190 System Laser Battery Allen Wrench Laser Paper Targets (Set of 3) 190 System Software 190 System Manual

190-3 System [MDM1205]


The 190-3 System is a portable personal marksmanship training system that allows shooters to become more proficient with their own firearms from any computer-accessible location. The 190-3 System is designed for use with a handgun which will accept the LTX-Z in-barrel laser. The LTX-Z laser has inserts which support use with .38, 9mm, .357, .40, .44 and .45 caliber handguns. The LTX-Z requires a minimum 3 inch barrel. By inserting the laser into your weapon and shooting at the targets, the hit detector sends immediate feedback to your computer via a USB connection. (Computer not included)

System Components
Carrying Case 190 Camera Bracket Camera:190 System LTX-Z Laser Paper Targets (Set of 3) 190 System Software 190 System Manual

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

LMTS - Laser Marksmanship Training Systems

360/460 System

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

LMTS - Laser Marksmanship Training Systems

360 System 1 Target [MDM1311T]


The 360-1 System provides a scaled 1-lane range capability that can be controlled by one scoring device and one instructor. Built around the TR900T target, hits are displayed live in real-time during the firing session, and the target can be enlarged to full screen viewing by a click of the mouse. The system is capable of timed sessions. It supports training with any weapon that accommodates the systems commercial laser (rifle, pistol, shotgun). The system can be disassembled and packed in the included Pelican case for storage and transportation and can also be configured with up to 10 targets.
Additional configurations for the system:

360 System 2 [MDM1302T]: Scaled 2-lane range capability. 360 System 3 [MDM1303T]: Scaled 3-lane range capability. 360 System 4 360 System 6 360 System 7 360 System 8 360 System 9
[MDM1304T]: Scaled 4-lane range capability.

360 System 5 [MDM1305T]: Scaled 5-lane range capability.


[MDM1306T]: Scaled 6-lane range capability. [MDM1307T]: Scaled 7-lane range capability. [MDM1308T]: Scaled 8-lane range capability. [MDM1309T]: Scaled 9-lane range capability. [MDM1310T]: Scaled 10-lane range capability.

360 System 10

System Components

Component amounts vary with system configuration.

TR-900T Target Laser Laser Battery Control Box USB & Cable Daisy Chain Cable

360/460 Long Cable (36 yards) Power Supply: 110V/240V 360 System Software 360 System Manual Carrying Case

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

10

LMTS - Laser Marksmanship Training Systems

365 System 1 Target

[MDM1401T]

The 365 System (w/ LTX-Z) is a one-lane range system that can be controlled by one scoring device and one instructor. All data can be saved, including session time, score and dispersion and each shot on the target is numbered and data is displayed by that numbered shot. The LTX-Z laser requires a minimum three inch barrel and fits a wide assortment of handguns, including .38, 9mm, .357, .40, .44, and .45 caliber weapons. It allows shooters to work on their presentation from the holster, in addition to use in routine marksmanship training. The system can be disassembled and packed in the included Pelican case for storage and transportation and can be configured with up to 10 targets (see additional configurations). Additional configurations for the system:

365 365 365 365 365 365 365 365 365

System System System System System System System System System

2 [MDM1402T]: Scaled 2-lane range capability. 3 [MDM1403T]: Scaled 3-lane range capability. 4 [MDM1404T]: Scaled 4-lane range capability. 5 [MDM1405T]: Scaled 5-lane range capability. 6 [MDM1406T]: Scaled 6-lane range capability. 7 [MDM1407T]: Scaled 7-lane range capability. 8 [MDM1408T]: Scaled 8-lane range capability. 9 [MDM1409T]: Scaled 9-lane range capability. 10 [MDM1410T]: Scaled 10-lane range capability.
Component amounts vary with system configuration.

System Components

TR-900T Target LTX-Z Laser Power Supply: 110V/240V Control Box USB & Cable Daisy Chain Cable

360/460 Long Cable (36 yards) 365 System Software 365 System Manual Carrying Case

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

11

LMTS - Laser Marksmanship Training Systems

460 System 1 Target

[MDM1611T]

The 460-1 System provides a scaled 1-lane range capability that can be controlled by one scoring device and one instructor. Built around the TR-900T target, hits are displayed live in real-time during the timed firing session. It supports training with any weapons that accommodate the MP400B laser (rifle, pistol, shotgun). The software is capable of storing shooter data (name, rank, unit, etc.) for on-demand recall, and performance data (shot sequence, location, time, center of the shot group, and dispersion) for each shooter. The system can be disassembled and packed in the included Pelican case for storage and transportation and can be configured with up to 10 targets (see additional configurations). Additional configurations for the system:

460 460 460 460 460 460 460 460 460

System System System System System System System System System

2 [MDM1602T]: Scaled 2-lane range capability. 3 [MDM1603T]: Scaled 3-lane range capability. 4 [MDM1604T]: Scaled 4-lane range capability. 5 [MDM1605T]: Scaled 5-lane range capability. 6 [MDM1606T]: Scaled 6-lane range capability. 7 [MDM1607T]: Scaled 7-lane range capability. 8 [MDM1608T]: Scaled 8-lane range capability. 9 [MDM1609T]: Scaled 9-lane range capability. 10 [MDM1610T]: Scaled 10-lane range capability.
Component amounts vary with system configuration.

System Components

TR-900T Target MP-400B Laser AA Battery LTA 380-2 Transmitter Rod LTA 556C Transmitter Rod Power Supply: 110V/240V

Control Box USB & Cable Daisy Chain Cable 360/460 Long Cable (36 yards) TR-900T Target Overlay: Standard TR-900T Target Overlays: Army Pack 460 System Software

Allen Wrench Control Box USB & Cable

460 System Manual Carrying Case

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

12

LMTS - Laser Marksmanship Training Systems

130 System

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

13

LMTS - Laser Marksmanship Training Systems 130 System

[MDM1502]

The 130 System uses L-3 EOTechs MP400B Laser Transmitter and enables marksmanship training to be conducted indoors or outdoors. It provides the shooter with both instant visual hit counter and audible feedback. This system is built around the TR-700 target which operates on AA batteries or with an included power supply. The system comes with laser transmitter rods for use with most 5.56mm rifles and 9mm pistols (requires a minimum 2 inch barrel). A remote cable can be purchased separately to activate the timer and clear the hit counter on the TR-700 at a distance. The system can also be configured with 7 or 10 targets (see additional configurations). Additional configurations for the system: 130 System 10 [MDM1503]: 10 target capability. 130 System 7 [MDM1504]: 7 target capability.

System Components
TR-700 Target MP-400B Laser LTA 380-2 Rod LTA 556 Rod

Component amounts vary with system configuration.

AA Battery Allen Wrench Power Supply: 110V/240V

Mask Set: Military 130 System Manual Carrying Case

130-1E Warrior Kit

[MDM1508A]

The 130-1E Warrior Kit, built around the TR-700 target, provides the shooter with instant visual and audible feedback. The 130-1E Warrior Kit gives the shooter a portable, durable marksmanship training system. This self-contained marksmanship training system allows the user to operate the system anywhere without electrical power using standard AA batteries both indoors and outdoors or is powered through the included 110V power supply. The standard configuration allows the shooter to practice a variety of weapon-handling skills with most 5.56 cal. rifles and 9mm pistols (requires a minimum 2 inch barrel). Additional configurations for the system: 130-10E Warrior Kit [MDM1509]: 10 target capability. 130-4E Warrior Kit [MDM1510A]: 4 target capability. 130-7E Warrior Kit [MDM1513A]: 7 target capability. 130-6E Warrior Kit [MDM1514A]: 6 target capability.
*Hard Pelican case inlcuded with multiple target system configurations

System Components

TABLE OF CONTENTS

Component amounts vary with system configuration.

TR-700 Target MP-400B Laser LTA 380-2 Rod LTA 556 Rod RC-260 Remote Cable

AA Battery Allen Wrench Power Supply: 110V/240V Mask Set: Military

Mini Reflective Target PL-10 Lubricant Carrying Case: Warrior (soft bag) 130 System Manual

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

14

LMTS - Laser Marksmanship Training Systems

390v6 System

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

15

LMTS - Laser Marksmanship Training Systems 390v6 System


From the fundamentals to judgmental situations, the 390v6 System provides a full range of training that prepares your team for most encounters they may face. A video training simulator that provides judgmental shoot/no shoot scenarios, the 390v6 System is now equipped with branching capabilities for select scenarios and new skill building exercises as well as paper target engagement. Users can now choose from a number of branching scenarios and also have the option to purchase a software license that unlocks a feature to create their own branching scenarios. Trainees use their department-issued firearms, while instructors review shot location in addition to other session details. Portable and small enough to fit in the back of a cruiser, it can be set up in a training area of limited size. Adding our SafeShot barrels and blanks provide recoil to complete your training in a more realistic manner. System Configurations:

390v6 System: A
(Scaled) Paper Targets.

[MDM1718A]: Includes the Transtar II & E-Type Silhouette Paper Targets. [MDM1718B]: Includes the Modified QIT (Scaled) & E-Type Silhouette

390v6 System: B

System Components
390v6 System: A [MDM1718A]

Video Projector Scoring Device (Laptop) LTX-Z Laser Laser Detection Device Small Geared Gead

Power Strip Crossover Ethernet Cable 390 Tripod 390 Scenario Library: 5 CDs 390 Scenario Library: DVD

390 Software CD 390 Sound System 390 System Manual Target Tube 390 Carrying Case

390 Linked System


The 390 Linked System expands the full-sized paper target engagement exercise section of the 390 System, a video scenario and fundamental skills training system. It adds one additional firing lane to a 390 System with the capability of expanding up to 8 firing lanes that are centrally linked to a single scoring device. Up to 8 shooters may engage individual targets at the same time which allows instructors more flexibility when training larger groups. The trainees have the opportunity to gain valuable experience on specific department/service full-sized paper targets before moving to actual live fire qualification. Depending upon the number of Linked Lane Kits added, additional paper targets may need to be purchased. (Note: For owners of 390v5 or 390v6 Systems, only the Linked Lane Kit and a Linked Communication Kit are required to support the system)

System Components
390v6 System (MDM1718A)

(See LMTS Components & Accessories Section for description of LMTS kits)

Linked Lane Kit

(MDM1715) Up to 7 lane kits may be added.

Linked Communication Kit (MDM1714)

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

16

LMTS - Laser Marksmanship Training Systems

Sniper Training System v2

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

17

LMTS - Laser Marksmanship Training Systems

Sniper Training System V2

[MDM1751]

The Sniper Training System V2 (STSv2) is a self-contained, lightweight, low cube (1 case) system. It is easily transported and set-up in a field environment requiring only 25 meters training distance, electrical power and no special facilities. Snipers train with their own standard issue rifles and optical sights. The system requires no modification to the sniper rifle and it does not interfere with normal rifle function. Firing is simulated by an external rifle-mounted Class IIIA laser. The trainer receives instant feedback via the instructor station screen. The STSv2 System incorporates a ballistics program that adjusts the point of impact for each rifle and ammunition combination based upon environmental conditions, such as wind, temperature, humidity, slope, altitude, and latitude. Ballistic variables are entered into the training session by a trainer to challenge the shooter to make necessary sight adjustments on their rifles sights to achieve a target hit. The system supports both custom rifle and bullet ballistics, as well as standard sniper rifle and bullet ballistics. Targets are scaled for range estimation at clearly specified training distances (by mil-dot or other reticle). Target presentations as seen through the snipers sighting system correspond to the scoring devices display in scale and color. The STSv2 System supports comprehensive after action reviews with a full feature trace mode and selectable mil-dot reticle or minute of angle (MOA) grid overlays for shot placement analysis.

System Components
STSv2 Laser Detection Device STSv2 Laser Detection Device Mount STSv2 E-Remote Box 30 Meter Cable MP400STS Laser with Cable & Bracket Barrel Shims (Set of 3) STS Laser Vibration Screw E-Local Box Power Cord Scoring Device (Laptop) STSv2 Target Set STSv2 Sun Shade Power Strip STSv2 System Manual STSv2 System Software STSv2 Carrying Case STS Accessory Case

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

18

LMTS - Laser Marksmanship Training Systems

Mini-RETS Target Set

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

19

LMTS - Laser Marksmanship Training Systems

Mini-RETS 7-Target Set w/LRETS box

[MDM1811]

The Mini-RETS 7-Target Set is a wired 7-target system that can be scaled to replicate a full scale field range from 15 or 25 meters. Targets are controlled by a scoring device (sold separately). Built around the TR-700 target, targets are raised on lifter units according to a timed scenario preset by the user or run on standard default settings. Target hits drop the target and are automatically scored, and the system produces a scorecard for each shooter. The system can be easily assembled and disassembled and may be linked with other Mini-RETS for up to 3 lanes of 7 targets. Included with this system are scaled E-type masks that present standard target silhouettes at appropriate scaled ranges.

System Components
(7) TR700 Targets (7) Lifters Basic Computer Control Interface Unit BCCIU cable Vehicle Power Cord BCCIU Power Cord LRETS Interface Box (7) Lifter Cables (7) 11 Meter Cables (7) Mask Sets: Military LRETS System Software Mini-RETS System Manual Power Supply Mini-RETS 2 Lifter Case Mini-RETS 5 Lifter Case

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

20

LMTS - Laser Marksmanship Training Systems

Wireless LCCATS

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

21

LMTS - Laser Marksmanship Training Systems

Wireless LCCATS

[MDM1851]

The Wireless Laser Collective Combat Advanced Training System (Wireless LCCATS) is designed for training in environments where it is difficult or impossible to use wired targets. The targets and lifters use 12v rechargeable batteries as a power source. The Wireless LCCATS targets collect and store laser hits within any of 5 different zones on the target and have time stamps to allow the software to display hits on the screen in real-time which are sent to an instructor control station via a wireless interface Box. Maximum line-of-sight operating distances from wireless access point are 300 meters to the Wireless interface box, and 200 meters to instructor control station. Wireless repeaters (sold separately) can extend ranges by a maximum line-of-sight operating distance of up to 300 meters or assist in attaining lineof-sight to the wireless access point in congested areas.

System Components
F-Type Target Case (2) E-Type Target Cases (3) E & F-Type Lifter Cases E-Type Lifter & CCIU Case Wireless LCCATS Case (4) E-Type Targets (3) F-Type Targets (4) E-Type Lifters (3) F-Type Lifters (8) Wireless Batteries (8) Battery Chargers (8) Battery Charger Cables (7) Target Adapter Cables (7) Lifter Adapter Cables (2) Power Strips WAP/Repeater Cable (7) Wireless Interface Boxes Wireless Access Point Scoring Device (Laptop) (7) 5A Fuses (Lifters) (8) 2A Fuses (WIB/WAP) Wireless LCCATS Manual Wireless LCCATS Software Reflective Zero Target

Wireless Repeater Assembly

[MDM1852]

The Wireless Repeater Assembly is designed to extend the range of wireless LCCATS targets a maximum line-of-site operating distance of up to 300 meters. The wireless repeater can also be used to extend the range for a target placed where line-of-sight is lost to the wireless access point (WAP).

System Components
Wireless Repeater Wireless Battery Wireless Battery Charger Wireless Battery Charger Cable Wireless WAP/Repeater Cable

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

22

LMTS - Laser Marksmanship Training Systems

Multi-Use Target Systems

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

23

LMTS - Laser Marksmanship Training Systems

MUTAR - ALT-C System

[MDM2102]

The MUTAR - Alt-C is designed for individuals interested in providing long distance shooting practice (50 to 300 meters) in short training distances (15 to 25 meters). The Multi-Use Target with Alternate Course C overlay (MUTAR ALT C) is an electronic replica of the actual paper Scaled Target Alternate C Course. Up to ten targets may be controlled by one scoring device, with software providing instant hit feedback and scoring. Included are 15 and 25 meter scaled target faces with necessary cables and power supply packed into its own durable case. The portability of the system allows for an authentic range experience in an assembly hall, classroom, or outdoors without any special facility requirements. The software is capable of saving shooter, session, and performance data for later recall for review, display, data transfer, or printing to determine the individuals progress. The multi-use target gives the user the option of purchasing not only the Advanced Alt-C overlays (included with the MUTAR Alt-C), but also the Machine Gun Training System package to use with the multi-use target.

System Components
(1) Multi-Use Target Package: Multi-Use Target MUTAR Power Supply 30M Control Cable 3M Linking Cable MUTAR Case Foam MUTAR Overlay Bag (1) MUTAR Alt-C Overlay Package: (1) Rifle Laser Package: MUTAR 15M Alt-C Overlay MP400B Laser MUTAR 25M Alt-C Overlay AA Battery MUTAR - Alt-C System Software M16 Flex Mount MUTAR - Alt-C Manual Bracket Assembly

Optional packages are available to add capability to your MUTAR System: To Add a U.S. Air Force Tactical Rifle Qualification Course (TRQC):

MUTAR: TRQC Overlay Package

[MDP1002]

To Add Machine Gun Training for U.S. Army: (MGTS-AR)

MUTAR: MGTS-AR Overlay Package MG Laser Package [MDP0002] MUTAR: MGTS-AF Overlay Package MG Laser Package [MDP0002]

[MDP2001]

To Add Machine Gun Training for U.S. Air Force: (MGTS-AF)


[MDP2003]

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

24

LMTS - Laser Marksmanship Training Systems

MUTAR - TRQC

[MDM2103]

The MUTAR TRQC is designed for individuals interested in providing long distance shooting practice (50 to 300 meters) in short training distances (15 to 25 meters). The Multi-Use Target with Tactical Rifle Qualification Course overlay (MUTAR TRQC) is an electronic replica of the actual scaled U.S. Air Force Tactical Rifle Qualification Course (TRQC). Up to ten targets may be controlled by one scoring device, with software providing instant hit feedback and scoring. The portability of the system allows for an authentic range experience in an assembly hall, classroom, or outdoors without any special facility requirements. Included are two sets of 15 and 25 meter scaled target faces with necessary cables and power supply packed into its own durable case. The multi-use target gives the user the option of purchasing not only the TRQC overlays, but also the Machine Gun Training Systems for the U.S. Army and U.S. Air Force.

System Components
(1) Multi-Use Target Package: Multi-Use Target MUTAR Power Supply 30M Control Cable 3M Linking Cable MUTAR Case Foam MUTAR Overlay Bag (1) MUTAR TRQC Overlay Package: MUTAR 15M Timed Fire Overlay MUTAR 25M Timed Fire Overlay MUTAR 15M Slow Fire Overlay MUTAR 15M Slow Fire Overlay MUTAR - TRQC System Software MUTAR - TRQC Manual (1) Rifle Laser Package: MP400B Laser AA Battery M16 Flex Mount Bracket Assembly

Optional packages are available to add capability to your MUTAR System: To Add U.S. Army Scaled Target Alternate Course (Alt-C):

MUTAR: ALT-C Overlay Package

[MDP1001]

To Add Machine Gun Training for U.S. Army (MGTS-AR):

MUTAR: MGTS-AR Overlay Package MG Laser Package [MDP0002] MUTAR: MGTS-AF Overlay Package MG Laser Package [MDP0002]

[MDP2001]

To Add Machine Gun Training for U.S. Air Force (MGTS-AF):


[MDP2003]

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

25

LMTS - Laser Marksmanship Training Systems

MUTAR - MGTS-AR (Army)

[MDM2121]

The Multi-Use Target MGTS-AR is an electronic replica of the actual paper 10 meter machine gun target. Up to ten targets may be controlled by one scoring device, with software providing instant hit feedback. Included with each target is the machine gun laser with barrel mounting brackets for M249 and M240 machine guns, necessary cables, and power supply, all packed into its own durable case. This makes transportation and set-up both simple and fast.

System Components
(1) Multi-Use Target Package: Multi-Use Target MUTAR Power Supply 30M Control Cable 3M Linking Cable MUTAR Case foam MUTAR Overlay Bag (1) MGTS-AR Overlay Package: MUTAR 10M MG Overlay MUTAR - MGTS-AR Software MUTAR - MGTS-AR Manual (1) MG Laser Package: MP400MG Laser M249 Bracket M240 Bracket AA Battery Laser Vibration Screw

Optional packages are available to add capability to your MUTAR System: To Add U.S. Army Scaled Target Alternate Course (Alt-C):

MUTAR: ALT-C Overlay Package Rifle Laser Package [MDP0003] MUTAR: TRQC Overlay Package Rifle Laser Package [MDP0003]

[MDP1001]

To Add U.S. Air Force Tactical Rifle Qualification Course (TRQC):


[MDP1002]

To Add Machine Gun Training for U.S. Air Force (MGTS-AF):

MUTAR: MGTS-AF Software Package

[MDP2004]

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

26

LMTS - Laser Marksmanship Training Systems

MUTAR - MGTS-AF (Air Force) [MDM2122]


Multi-Use Target MGTS-AF is an electronic replica of the actual paper 10 meter machine gun target. Up to ten targets may be controlled by one scoring device, with software providing instant hit feedback. Included with each target is the machine gun laser with barrel mounting brackets for M249 and M240 machine guns, necessary cables, and power supply, all packed into its own durable case. This makes transportation and set-up both simple and fast.

System Components
(1) Multi-Use Target Package: Multi-Use Target MUTAR Power Supply 30M Control Cable 3M Linking Cable MUTAR Case Foam MUTAR Overlay Bag (1) MGTS-AF Overlay Package: (1) MG Laser Package: MUTAR 10M MG Overlay MP400MG Laser MUTAR - MGTS-AF Software M249 Bracket MUTAR - MGTS-AF Manual M240 Bracket AA Battery Laser Vibration Screw

Optional packages are available to add capability to your MUTAR System: To Add U.S. Army Scaled Target Alternate Course (Alt-C):

MUTAR: ALT-C Overlay Package Rifle Laser Package [MDP0003] MUTAR: TRQC Overlay Package Rifle Laser Package [MDP0003]

[MDP1001]

To Add a U.S. Air Force Tactical Rifle Qualification Course (TRQC):


[MDP1002]

To Add Machine Gun Training for U.S. Air Force (MGTS-AF):

MUTAR: MGTS-AF Software Package

[MDP2002]

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

27

LMTS - Laser Marksmanship Training Systems

Multi-Use Target Package

[MDP0001]

The Multi-Use Target supports both machine gun and Alt-C training through use of different overlays and program software employed on the same base target. This allows the user flexibility and potentially greater efficiency in configuring their LMTS training devices to meet their requirements for these two systems. The Multi-Use Target requires a scoring device for operation.

System Components
Multi-Use Target 30 Meter Control Cable 3 Meter Linking Cable Power Supply MUTAR Case Foam MUTAR Overlay Bag

MG Laser Package

[MDP0002]

The MG Laser Package is needed when converting a MUTAR: Alt-C System (MDM2102) or a MUTAR: TRQC (MDM2103) to either MUTAR: MGTS Systems (U.S. Army or U.S. Air Force). A separate MUTAR: MGTS Overlay Package is also required for a full conversion.

System Components
MP400MG Laser M240 Bracket M249 Bracket AA Battery Laser Vibration Screw

Rifle Laser Package

[MDP0003]

The Rifle Laser Package is needed when converting either MUTAR: MGTS System to a MUTAR: Alt-C (MDM2102) or MUTAR: TRQC (MDM2103). A separate MUTAR: Alt-C or MUTAR: TRQC Overlay Package is also required for a full conversion. The Rifle Laser Package is for use with the M16/M4 rifle.

System Components
MP400B Laser AA Battery M16 Flex Mount Bracket Assembly

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

28

LMTS - Laser Marksmanship Training Systems

MUTAR: Alt-C Overlay Package

[MDP1001]

The MUTAR: Alt-C Overlay Package is needed when converting either MUTAR: MGTS Systems, or the MUTAR: TRQC (MDM2103) System, to the MUTAR: Alt-C System (MDM2102). If the user is converting a MUTAR: MGTS System, the Rifle Laser Package (MDP0003) is also required.

System Components
MUTAR 15M Alt-C Overlay MUTAR 25M Alt-C Overlay MUTAR - Alt-C Software MUTAR - Alt-C Manual

MUTAR: TRQC Overlay Package

[MDP1002]

The MUTAR: TRQC Overlay Package is needed when converting either MUTAR: MGTS Systems, or the MUTAR: Alt-C (MDM2102) System, to the MUTAR: TRQC (MDM2103) System. If the user is converting a MUTAR: MGTS System, the Rifle Laser Package is also required.

System Components
MUTAR 15M Timed Fire Overlay MUTAR 15M Slow Fire Overlay MUTAR 25M Timed Fire Overlay MUTAR 25M Slow Fire Overlay MUTAR - TRQC Software MUTAR - TRQC Manual

MUTAR: MGTS-AR (Army) Overlay Package

[MDP2001]

The MUTAR: MGTS AR Overlay Package is needed when converting a MUTAR: Alt-C (MDM2102) or MUTAR: TRQC (MDM2103) System to a MUTAR: MGTS AR. The MG Laser Package (MDP0002) is also required for a full conversion.

System Components
MUTAR 10M MG Overlay MUTAR - MGTS-AR Software MUTAR - MGTS-AR Manual

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

29

LMTS - Laser Marksmanship Training Systems

MUTAR: MGTS-AR (Army) Software Package

[MDP2002]

The MUTAR: MGTS AR Software Package is needed when converting a MUTAR: MGTS AF to a MUTAR: MGTS AR.

System Components
MUTAR - MGTS-AR Software MUTAR - MGTS-AR Manual

MUTAR: MGTS-AF (Air Force) Overlay Package

[MDP2003]

The MUTAR: MGTS AF Overlay Package is needed when converting a MUTAR: Alt-C (MDM2102) or MUTAR: TRQC (MDM2103) System to a MUTAR: MGTS AF. The MG Laser Package (MDP0002) is also required for a full conversion.

System Components
MUTAR 10M MG Overlay MUTAR - MGTS-AF Software MUTAR - MGTS-AF Manual

MUTAR: MGTS-AF (Air Force) Software Package [MDP2004]


The MUTAR: MGTSAF Software Package is needed when converting a MUTAR: MGTSAR to a MUTAR: MGTSAF.

System Components
MUTAR - MGTS-AF Software MUTAR - MGTS-AF Manual

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

30

LMTS - Laser Marksmanship Training Systems

M16 Blank Firing System


[MDM1901]

M4 Blank Firing System


[MDM1902]

M240 Blank Firing System


[MDM1903]

SafeShot M16 Upper Receivers bring added realism and safety to marksmanship, closequarter and tactical training. By replacing the upper receiver of the weapon with the SafeShot M16 Upper Receiver, without any other modification it allows the shooter to use their own firearm while maintaining original trigger pull to duplicate live-fire function. Combined with the LMTS targets, the true point-of-impact of the laser beam provides recordable accuracy that takes blank-fire to a new level of realism. Chambering only patented 5.56 SafeShot lead-free blanks, they permit training whether indoor or in the field, while providing the recoil, sound, and smell of live-fire - everything but the bullet. The SafeShot M16 upper receiver is made of blue-anodized metal allowing for immediate recognition as a training unit. The one-piece barrel prevents muzzle discharge and will not affect the lower receiver. This is an M16A2 configuration.

SafeShot M4 Upper Receivers bring added realism and safety to marksmanship, closequarter and tactical training. By replacing the upper receiver of the weapon with the SafeShot M4 Upper Receiver, without any other modification it allows the shooter to use their own firearm while maintaining original trigger pull to duplicate live-fire function. Combined with LMTS targets, the true point-of-impact of the laser beam provides recordable accuracy that takes blank-fire to a new level of realism. Chambering only patented 5.56 SafeShot lead-free blanks, they permit training whether indoor or in the field, while providing the recoil, sound, and smell of live-fire - everything but the bullet. The SafeShot M4 upper receiver is made of blue-anodized metal allowing for immediate recognition as a training unit. The one-piece barrel prevents muzzle discharge and will not affect the lower receiver.

The SafeShot M240 barrel brings added realism and safety to marksmanship, closequarter and tactical training. Without any other modification except replacing barrels, and no affect to the lower receiver, the one piece training barrel allows the shooter to use their own firearm to duplicate live-fire function with no muzzle discharge. Combined with LMTS targets, the true point-of-impact of the laser beam provides recordable accuracy that takes blank-fire to a new level of realism. The M240 BFS will only chamber patented 7.62 SafeShot lead-free blanks for ammunition of the same caliber. The M240 BFS permits training whether indoor or in the field, while providing the recoil, sound, and smell of live-fire - everything but the bullet.

System Components
M240 SafeShot Barrel Bracket: M240 w/Laser Vibration Screw Laser: MP-400MG AA Battery

System Components
SafeShot M16 Upper Receiver MP400B Bracket-Mounted Laser Assembly

System Components
SafeShot M4 Upper Receiver MP400B Bracket-Mounted Laser Assembly

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

31

LMTS - Laser Marksmanship Training Systems

M249 Blank Firing System


[MDM1904]

M16 Non-Gun Firing System


[MDM1906]

M9 Barrel Blank Firing System


[MDM1920]

SafeShot M249 blank firing systems bring added realism and safety to marksmanship, close-quarter and tactical training. Without any other modification except replacing barrels, and no affect to the lower receiver, the one piece training barrel allows the shooter to use their own firearm to duplicate live-fire function with no muzzle discharge. Combined with LMTS targets, the true point-of-impact of the laser beam provides recordable accuracy that takes blank-fire to a new level of realism. Chambering only patented linked 5.56 SafeShot lead-free blanks, they permit training whether indoor or in the field, while providing the recoil, sound, and smell of live-fire - everything but the bullet. The flash suppressor of the SafeShot M249 barrel is painted blue allowing for immediate recognition as a training unit.

The M16 non-gun firing system is a commercial airsoft rifle with the addition of the M16 carrying handle and an attached M16/M4 bracket-mounted MP-400B laser. The MP-400B lasers are equipped with a vibration sensor to specifically detect the hammer fall (strike of hammer) to activate the laser and simulate the actual bullet fired by the firearm.

System Components
M16 Non-Gun w/Magazine Battery Pack Charger M16/M4 Bracketed MP-400B Laser AA Battery Carry Handle

The SafeShot M9 Blank Firing System combines repetitive blank-fire operation, replicated recoil and recovery with actual down-range targeting capability. The M9 SafeShot barrel replaces the live-fire barrel of the M9 pistol with simple field-stripping and is ready for use with the lead-free SafeShot 9mm blank. The LT-300 laser screws into the muzzle of the barrel and projects a laser dot with each shot. It may be used as a marksmanship and training tool with the TR-700, Mini-RETS, 390 System or in a tactical scenario with Wired or Wireless LCCATS. The combination of barrel and laser is completely holsterable and contains no tethers or attachments of any kind.

System Components
M9 Beretta SafeShot Barrel LT-300 Laser w/ Spring LT-300 Battery

System Components
M249 SafeShot Barrel Laser: MP-400MG Bracket: M249 with Sight Clamp AA Battery

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

32

LMTS - Components & Accessories


Laser Marksmanship Training System Kits

LMTS Accessory Kit

[MDM2003]

The LMTS Accessory Kit allows more effective and immediate use of all LMTS products.

System Components
Accessory Kit Case LAD 5.56mm w/ Case 12V DC to AC Inverter 100 Extension Cord (3) 50 Extension Cords

(6) 25 Extension Cords (3) Power Strips PL-10 Lubricant

Wireless Upgrade Kit

[MDM1861]

The Wireless Upgrade Kit is designed to be added to the Wired LCCATS configuration to convert wired to wireless LCCATS.*

System Components
Wireless LCCATS Case (7) Wireless Interface Boxes Wireless Access Point (8) Wireless Batteries (8) Battery Chargers (8) Battery Charger Cables (7) Lifter Adapter Cables (7) Target Adapter Cables WAP/Repeater Cable (2) Power Strips Wireless LCCATS Software Wireless LCCATS Manual (8) 2A Fuses (WIB/WAP)

*Wireless card sold separately, as required.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

33

LMTS - Components & Accessories


Laser Marksmanship Training System Kits

390 Linked Communication Kit[MDM1714]


The 390 Linked Communication Kit is used with the 390v5 or 390v6 System when two (2) or more linked papertarget lanes are required for training. One communication kit is designed to support up to eight (8) simulated firing lanes.

390 Linked Lane Kit [MDM1715]


The 390 Linked Lane Kit is used with the 390v5 or 390v6 System when two (2) or more linked paper-target lanes are required for training. Up to seven (7) lane kits can be added to the 390v6 System to create a total of eight (8) simulated firing lanes controlled by one instructor, which gives more shooters the ability to train in a shorter time. Paper targets must be purchased separately (see pg. 53-54).

390 Linked Conversion Kit

[MDM1716]

The 390 Linked Conversion Kit contains the components necessary to link an additional 390 Advanced System as one of the lanes of a 390 Advanced System - Linked. The 390 Advanced System Linked can be built to support eight total simulated firing lanes.

System Components
390 Linked Network Switch Managed Switch Power Supply 390 Linked PoE Terminal 50 Extension Cord 140 Control Network Cable 25 Camera Network Cable 390 Linking Power/Data Cable Communication Kit Manual Communication Kit Software Cd Cardboard Carrying Case

System Components
390 Linked PoE Terminal 390 Linking Power/Data Cable 25 Camera Network Cable Cardboard Carrying Case

System Components
LTX-Z Laser Laser Detection Device 390 Linked PoE Terminal 390 Linking Power/Data Cable 25 Camera Network Cable Tripod Cardboard Carrying Case

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

34

LMTS - Components & Accessories


Carrying Cases

Carrying Case 110 System [MD1503]


The 110 carrying case is used for carrying a complete 110/115 System including accessories. The 110 carrying case is not a standard component of the 110 System but is a component of the 130 System. For the 110 System, the 110 carry case is a separately purchased accessory.

Carrying Case for the 390v6 System


Carrying Case for 130-10 [MD1508]

[MD1507]

Pelican 1650 case with custom foam insert to hold the components of the 390v6 System.

Carrying Case for 10 TR700 Targets

[MD1508]

This Pelican 1650 case is used with the 130-10 System.

Carrying Case 130-7 System

[MD1509]

This Pelican 1650 case is used to hold the 130-7 System.

Carrying Case for TR-900 Targets

[MD1511T]

This Pelican 1650 case is used with the 460 System. It is also the carrying case used to carry additional TR-900 targets for the 360-1 to 360-10 and 365-1 to 365-10 Systems.

Carrying Case Accessory Kit

[MD1512]

This carrying case is used to hold and store the LMTS Accessory Kit.

Carrying Case Warrior (soft)


Carrying Case for TR-900 Targets [MD1511T] Carrying Case Warrior - Soft [MD1514]

[MD1514]

This soft case is a used to transport the 130-1E Warrior Kit.

Carrying Case RETS 2-Lifter

[MD1515]

This Pelican 1650 case is part of the Mini-RETS 7-Target System.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

35

LMTS - Components & Accessories


Carrying Cases

Carrying Case RETS 5-Lifter

[MD1517]

E Target Case

[MD1546]

This Pelican 1650 case is part of the Mini-RETS 7-Target System.

Carrying Case for LAD

[MD1518]

This Pelican 1780 case is equipped to carry two (2) E-Type LCCATS targets. It is a component of both the Wired and Wireless LCCATS.

This carrying case holds the Laser Alignment Device and 5.56mm and 7.62mm Laser Transmitter Assemblies (LTA).

F Target Case

[MD1547]

Carrying Case 130-4E

[MD1528]

This Pelican 1780 case is equipped to carry three (3) F-Type LCCATS targets included in a Wired or Wireless LCCATS.

This Pelican 1600 case is equipped to carry four (4) 130-1E soft bag Warrior Kits, including accessories.

STSv2 Accessory Case

[MD1552]

Carrying Case for 130-7E Warrior Kit

[MD1535]

This Pelican 1650 case is equipped to carry seven (7) 130-1E soft bag Warrior Kits, including accessories.

The STSv2 Accessory Case is a component of the STSv2. It is a Pelican 1200 case used to store bracket shims, STS laser, e-local box, scoring device power supply, and e-local box power cord.

M-16 Non-Gun (5) Rifle Case

[MD1536]

This Rotomolded ATA case is used to hold five (5) each of the M-16 Non-Gun firing assembly.

Wireless LCCATS Case

[MD1540]

The Wireless LCCATS case is a component of the Wireless LCCATS and holds the components required to convert a wired system to wireless.

E&F Lifter Case

[MD1544]

This durable Pelican 1660 case is a component of both the Wired and Wireless LCCATS.
F Target Case [MD1547]

E Lifter & CCIU Case

[MD1545] Wireless LCCATS Case [MD1540]

This case is a component of both the Wired and Wireless LCCATS.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

36

LMTS - Components & Accessories


SYSTEM Cables SYSTEM ACCESSORIES

BL-640 Long Cable 360/460


[MD1010]

STSv2 Sunshade
[MD1553]

The BL-640 cable is part of the 360 and 460 System configurations. It connects the CB-440 USB control box to the TR-900 target.

The STSv2 sunshade is a component of the STSv2. It is used to protect the target face from direct and excessive reflective sunlight. The STSv2 sunshade is made of solid metal.

BL-650 Daisy Chain 360/460


[MD1011]

Allen Wrench
[MD2525]

The BL-650 Daisy Chain cable is part of the 360 and 460 System configurations. This cable can be used to connect one TR-900T target to another TR-900T target.

The Allen wrench is used to adjust the LT100C Laser and the following Laser Transmitter Rods: LTA-1200, LTA-190, LTA220, LTA-240, LTA-310-2, LTA-380-2, LTA410, LTA-440, and the LTA-450-2.

BL-265 Daisy Chain


[MD1007]

390 Linked System Tripod


[MD3657]

This cable is used to link two TR-700 targets. When linking TR-700 targets with this cable, the RC-260 remote cable must be used. The Daisy Chain cable measures 16 6 in length.

Tripod used in the 390 Linked Lane Kit, this tripod serves as a stable mount for the LDD in the additional lanes.

RC-260 Remote Cable


[MD1031]

PL-10 Lubricant
[MD4259]

This cable plugs into the TR-700 target and is used to reset and start the system timer. This cable measures 50 1.5 in length.

PL-10 grease is assembly and all purpose lubricant used to lubricate 5.56 and 7.62 Laser Transmitter Rods prior to insertion in the barrel of a weapon.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

37

LMTS - Components & Accessories


Laser transmitter Brackets

M240 Bracket

[MD2528]

Flex Mount Bracket Package


[MDM2021]

Attaches the MP400MG Laser to the barrel of the M240 machine gun.

The Flex Mount bracket is used to attach the MP400B Laser to the barrel of either an M16 or M4 rifle for either dry or blank-fire training.

Components

M249 Bracket

[MD2529]

Attaches the MP400MG laser to the barrel of the M249 machine gun.

(1) MP400B Laser (1) Flex Mount Bracket (1) AA Battery

Laser Transmitter: MP400B with M16/M4 bracket [MDM2020]


The M16/M4 bracket is used to attach the MP400B Laser Transmitter to the barrel of either an M16 or M4 rifle for either dry or blank-fire training. The MP400B with M16/M4 bracket is sold as a unit. The bracket is not sold separately.

M2 Machine Gun Bracket [MD2532]


Attaches the MP400MG Laser to the barrel of the M2HB machine gun.

Components
(1) Bracketed MP400B Laser (1) AA Battery

Flex-Mount Bracket [MDM2539]


The flex mount bracket is made of aluminum and steel components and allows the MP400B Laser to be attached to the barrel of an M16 or M4 rifle. The Flex-Mount only works on the MP-400B Laser. It will not work on MP-400A Lasers.

MP-400 STS Laser Transmitter w/Cable and Bracket [MD2008BKT]


The MP-400 STS Laser Transmitter (does not use a battery) is externally bracket-mounted on the users firearm barrel for immediate training and is included as a component in the STSv2. The cable extends from the laser and connects with the STS e-Local box (STSv2) which connects to the scoring device in order to display hit locations. The MP-400 STS includes a laser vibration screw and shims.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

38

LMTS - Components & Accessories


Laser transmitter RODS

The commerical and MP400B laser transmitters can be affixed to the threaded portion of the transmitter rod which is then inserted into the firearm barrel. At the strike of the weapon hammer the laser emits a visible laser point to determine shot placement in dry-fire training. The laser transmitter rod is for dry-fire use only.

TYPE B RODS:

LTA-500 .50 [MD2515]


Designed for use with a .50 caliber weapon.

LTA-1200

[MD2505]

Designed for use with a 12 gauge shotgun.

LTA-190 .177 Air Pistol/Rifle

[MD2506]

Designed for use with a .177 caliber weapon.

LTA-220 .22, .222, .223 [MD2507]


Designed for use with .22/.222/.223 caliber weapons.
LTA-220 .22, .222, .223 Rod LTA-380-2 .38, .357, 9mm Rod

LTA-240 .25 [MD2508]


Designed for use with a .25 caliber weapon.

LTA-1200 Rod

LTA-440 .44 Rod

TYPE A RODS:

TYPE C RODS:

LTA-310-2 .30, 2 Barrel [MD2509]


Designed for use with a 2, .30 caliber weapon.

LTA 500C .50 Military [MD2516]


Designed for use with military .50 caliber weapons.

LTA-380-2 .38, .357, 9mm

[MD2511]

LTA 556C 5.56mm

[MD2517]

Designed for use with any 9mm, .38, or .357 handgun with a minimum 2-inch barrel.

Designed for use with a 5.56mm caliber weapon.

LTA 762C 7.62mm [MD2519]

LTA 410 .40, .41, 10mm [MD2512]


Designed for use with .40, .41, and 10mm caliber weapons.

Designed for use with 7.62mm caliber weapons.

LTA-440 .44 [MD2513]


Designed for use with a .44 caliber weapon.

COMBINATION ROD:

LTA 450-2 .45, 2 barrel

[MD2514]

LTA Rifle 5.56/7.62mm

[MD2520]

Designed for use with a .45 caliber weapon.

Designed to mount the commerical laser transmitter into the barrel of 5.56 and 7.62 caliber weapons.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

39

LMTS - Components & Accessories


LASER TRANSMITTERS

Laser Transmitter: LTX-Z

[MD2015]

The LTX-Z Laser Transmitter is inserted directly into the barrel of any .38, 9mm, .357, .42, .44 and .45 caliber pistol allowing the individual to use their own weapon while dry-fire training; no separate/special weapon required. The weapon must have a minimum 3-inch barrel.

Components
LTX-Z Laser LTX-Z Battery Pack Laser Sleeve Small Screwdriver Adjustment Screw .357/.38/9mm Insert 10mm/.40 cal. Insert 44/.45 cal. Insert .44/.45 Cap .357/.38/9mm/10mm/.40 Cap

Laser Transmitter: LT-300

[MD2002A]

The LT-300 Laser Transmitter is used for dry or blank-fire training with the SafeShot pistol barrel. This laser is placed in the SafeShot pistol barrel. The SafeShot barrel then temporarily replaces the shooters original pistol barrel. The LT-300 comes with one (1) LT-300 battery and spring.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

40

LMTS - Components & Accessories


LASER TRANSMITTERS

Laser Transmitter: MP400B

[MD2005A]

The MP400B Laser Transmitter is the standard laser used with most LMTS products. It can be used with a Transmitter rod for dry-fire or mounted to a bracket for blank-fire. The laser operates on and is sold standard with one AA battery.

Laser Transmitter: MP400MG

[MD2007A]

The MP400MG Laser Transmitter is designed for use with the M249, M240, M2, and M60 machine guns and is externally bracket-mounted on the users firearm barrel for training. The laser attaches to the bracket by means of a Picatinny rail grabber permanently affixed to the laser. Machine gun brackets are sold separately. The laser operates on and is sold standard with one AA battery. This laser comes with a laser vibration screw.

MP400 Laser Transmitter Specifications:


Beam Divergence: <= 1mRad Class: IIIA Safety: Complies with eye-safety standards: American ANSI-Z-136.1, N.A.T.O. STANAG No. 3606. This product is in conformity with the performance standards for laser products under 21 CFR PART 1040 Power Source: 1.5 VDC (AA Battery) Constant ON mode operation time with new AA Battery: >8 hours Dimensions (LxWxH): 3.24x1.76x0.95 inch Weight (with battery, without bracket and rod): <=0.25lb

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

41

LMTS - Components & Accessories


LASER Accessories & BATTERIES

AA Battery for MP-400 and TR-700


1.5 volt DC AA battery.

[MD2521]

LT-100 Battery

[MD2522]

The LR44 battery is a special purpose 6V battery made up of four commercially-available 1.5V 120 mAh batteries packaged together to make the battery for the LT-100 Laser Transmitter.

LT-300 Battery

[MD2524]

The V392 battery is a special purpose 6V battery made up of four commercially-available 1.5V 38mAh batteries packaged together to make the battery for the LT-300 Laser.

LTX-Z Accessory Pack [MD2544] LTX-Z Battery


[MD2541]

The LTX-Z Accessory Pack contains all the item that come with the LTX-Z Laser except the laser module itself.

The LTX-Z battery is a special purpose 4.5V battery made up of three commercially available 1.5V 27mAh batteries packaged together to make the battery for the LTX-Z Laser.

Components
(1) LTX-Z Battery Pack (1) Laser Sleeve (1) Small Screwdriver (1) Adjustment Screw (1) .357/.38/9mm Insert (1) 10mm/.40 cal. Insert (1) .44/.45 cal. Insert (1) .44/.45 Cap (1) .357/.38/9mm/10mm/.40 Cap

STSv2 Laser Vibration Screw [MD2537]


The laser vibration screw is an included item on the STS and machine gun lasers and is designed to aid in receiving the proper vibration from the strike of the hammer which then pulses the laser when the shooter fires the weapon.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

42

LMTS - Components & Accessories


LASER ALIGNMENT DEVIcES

Laser Alignment Device 5.56mm [MD2533]


The 5.56mm Laser Alignment Device (LAD) is a precision barrel section with an attached scope designed to facilitate quick and accurate calibration of the beam from an MP400B Laser concentric with the affixed laser transmitter rod. The weapons sights can then be adjusted to the laser dot at a fixed distance to laser boresight a weapon prior to live-fire zeroing or confirm a zero on a weapon of unknown condition.

Components
5.56mm LAD Carrying Case

Laser Alignment Device 7.62

[MD2534]

The 7.62mm Laser Alignment Device (LAD) is a precision barrel section with an attached scope designed to facilitate quick and accurate calibration of the beam from an MP400B Laser concentric with the affixed laser transmitter rod. The weapons sights can then be adjusted to the laser dot at a fixed distance to laser boresight a weapon prior to live-fire zeroing or confirm a zero on a weapon of unknown condition.

Components
7.62mm LAD Carrying Case

Laser Alignment Device Tri-Cal LAD

[MD2536]

The Tri-Caliber Laser Alignment Device (LAD) is a precision barrel section with an attached scope, designed to facilitate quick and accurate calibration of the beam from an MP400B Laser concentric with the affixed laser transmitter rod. The weapons sights can then be adjusted to the laser dot at a fixed distance to laser boresight a weapon prior to live-fire zeroing or confirm a zero on a weapon of unknown condition. The device has interchangeable bore inserts to accommodate and support bore sight with 5.56 mm and 7.62mm caliber rods. The base housing itself supports boresight of the .50 caliber.

Components
Tri-Cal LAD 5.56mm Bore Insert 7.62mm Bore Insert Carrying Case

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

43

LMTS - Components & Accessories


LMTS Manuals

SYSTEMS:

110 System Manual 115 System Manual 130 System Manual

[MD4503] [MD4545] [MD4505] [MD4561]

130-E Warrior Kit Manual 190 System Manual

[MD4506] All manuals contain setup, operation, and troubleshooting instructions.

190-3 System Manual [MD4563] 360 System Manual 365 System Manual
[MD4513] [MD4546] [MD4559] [MD4543]

ACCESSORIES:

Accessory Instruction Type A Rod for MP400B Accessory Instruction Type B Rod for MP400B Accessory Instruction Type C Rod for MP400B Accessory Instruction Type A Rod for LT100 Accessory Instruction Type B Rod for LT100 Accessory Instruction Type C Rod for LT100
[MD4550] [MD4552]

[MD4564] [MD4565] [MD4566

390 v6 System Manual 390 Linking Kit Manual

460 System Manual [MD4510] LRETS Manual


[MD4536]

[MD4567] [MD4568] [MD4569]

Mini-RETS Manual [MD4512] MUTAR MGTS-AF Manual MUTAR MGTS-AR Manual MUTAR Alt-C Manual MUTAR TRQC Manual STSv2 Manual
[MD4548] [MD4532]

Accessory Instruction MG Laser Package [MD4570] Accessory Instruction M2 Laser Bracket


[MD4571]

Accessory Instruction Rifle Laser Package [MD4572] Accessory Instruction Wireless LCCATS Repeater Flex-Mount Laser Bracket Manual M16/M4 Bracket Mount Manual Laser Alignment Device Manual
[MD4573] [MD4575] [MD4576] [MD4574]

[MD4554] [MD4556]

Wireless LCCATS Manual

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

44

LMTS - Components & Accessories


TR-700 TARGET MASK SETS

MS-100 Standard Mask Set [MD3501]


Set of (3) distance masks for a TR-700 target.

Military Mask Set

[MD3515]

The Military Mask Set enables the TR-700 target to be used for a variety of shooting scenarios. The Military Mask Set includes 3 each E-Type silhouette targets scaled to replicate engagements at varying ranges. Large E-Type Silhouette Mask: When engaged at 25 meters, replicates a 25m zero target or a 300 meter E-silhouette. Medium E-Type Silhouette Mask: When engaged at 25 meters, replicates a 450 meter E-silhouette. When engaged at 15 meters, replicates a 15m zero target or a 300 meter E-silhouette. Small E-Type Silhouette Mask: When engaged at 25 meters, replicates a 600 meter E-silhouette. When engaged at 10 meters, replicates a 10m zero target or a 300 meter E-silhouette.

Navy Mask Set

[MD3516]

This mask set is designed specifically for the U.S. Navy and is used with the TR-700 targets. The Navy Set consists of two masks: a 10 Yd. Rifle A Qualify mask and a 25 Yd. Rifle A Qualify mask.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

45

LMTS - Components & Accessories


TR-900S TARGET Overlays

M16A2 15M E-Type

[MD3518]

15m Scaled Target overlay when engaged at 15 meters, replicates a 15m zero target or 300 meter E-silhouette.

Navy Rifle Sustainment 25 Yard [MD3525]


Overlay designed to replicate the U.S. Navy Rifle Sustainment paper target from a shooting distance of 25 yards.

M16A2 25M E-Type

[MD3520]

Transition/TranStar II
[MD3526]

25m Scaled Target overlay when engaged at 25 meters, replicates a 25m zero target or a 300 meter E-silhouette.

Overlay designed for training with the M-9 Pistol, M-16A1 and A2 rifles, and machine guns.

M4

[MD3521]

25m Scaled Target overlay with modified E-Type target silhouette.

Army Pack [MD3532]


Part of the 360, 365, and 460 System. It contains four individual overlays (M16/ A2 15 & 25m; M4; M9) relating to the Army course of fire.

M9 [MD3522]
10ft M9 Target overlay when engaged at 10 feet, replicates the 25m M9 target. Used for engagements at 15 feet to provide better prediction of live-fire qualification.

Navy Rifle-A 10 Yard

[MD3523]

Overlay designed to replicate the U.S. Navy Rifle A paper target from a shooting distance of 10 yards.

Navy Pack

[MD3532N]

Navy Rifle-A 25 Yard

[MD3523-1]

Overlay designed to replicate the U.S. Navy Rifle A paper target from a shooting distance of 25 yards.

This overlay pack is part of the 360/365/460 target system. It contains five individual overlays (10 & 25 yd. Rifle Qual., 10M Zero M4 Carbine Target, 10M Zero M16A2 Target, Transition/ Transtar II) relating to the U.S. Navy course of fire.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

46

LMTS - Laser Marksmanship Training Systems


TR-900T target overlays

M16A2 25M
The new TR-900T target overlays have improved registration marks to align the overlay with the target face. Each overlay now has the target name and scaled shooting distance indicated along the top for easy recognition.

[MD3555-2]

25m Scaled Target overlay when engaged at 25 meters, replicates a 25m zero target or a 300 meter E-silhouette.

10-Ring Standard

[MD3555]

M4 - 25M Zeroing

[MD3555-3]

The default target included with all TR-900T targets for basic marksmanhip training. Rings are scored from 1 (outer most ring) to 10 points (center bullseye).

25m Scaled Target overlay with modified E-Type target silhouette.

Machine Gun

[MD3524T]

M9 - 10 Ft. [MD3555-4]
10ft M9 Target overlay when engaged at 10 feet, replicates the 25m M9 target. Used for engagements at 15 feet to provide better prediction of live-fire qualification.

15m Scaled Target overlay when engaged at 15 meters, replicates a 15m zero target or 300 meter E-silhouette.

M16A2 15M E-Type

[MD3555-1]

900T 4-Pack [MD3555]


Part of the 360, 365, and 460 System. It contains four individual overlays (M16/A2 15 & 25m; M4; M9) relating to the Army course of fire.

15m Scaled Target overlay when engaged at 15 meters, replicates a 15m zero target or 300 meter E-silhouette.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

47

LMTS - Components & Accessories


MULTi-use target overlays

25m Timed Fire

[MD3556]

15m Alt-C

[MD3563]

This overlay is included with the LMTS MUTAR TRQC System and the MUTAR TRQC Package. It replicates the U.S. Air Force Timed Fire target and is designed to be engaged at a distance of 25m.

This overlay is included with the LMTS MUTAR Alt-C System and the MUTAR Alt-C Package. It replicates the U.S. Army Alt-C target and is designed to be engaged at a distance of 15m.

15m Timed Fire

[MD3557

This overlay is included with the LMTS MUTAR TRQC System and the MUTAR TRQC Package. It replicates the U.S. Air Force Timed Fire target and is designed to be engaged at a distance of 15m.

25m Alt-C

[MD3564]

This overlay is included with the LMTS MUTAR Alt-C System and MUTAR Alt-C Package. It replicates the U.S. Army Alt-C target and is designed to be engaged at a distance of 25m.

25m Slow Fire


This overlay is MUTAR TRQC TRQC Package. Force Slow Fire be engaged at a

[MD3558]

included with the LMTS System and the MUTAR It replicates the U.S. Air target and is designed to distance of 25m.

10m MGTS

[MD3565]

This overlay is included with the LMTS MUTAR MGTS and MUTAR MGTS Package. It replicates the 10m machine gun target and is designed to be engaged at a distance of 10m.

15m Slow Fire [MD3559]


This overlay is included with the LMTS MUTAR TRQC System and the MUTAR TRQC Package. It replicates the U.S. Air Force Slow Fire target and is designed to be engaged at a distance of 15m.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

48

LMTS - Components & Accessories


power supplies SCORING DEVICES AND ACCESSORIES

TR-700 Switching Power Supply [MD1004]


The TR-700 switching power supply is used to power TR-700 targets from 110V power outlets.

Scoring Device w/ USB to Serial Adaptor [MD3600A]


Laptop computer used to control LMTS systems. A USB to serial adaptor is included with the scoring device.

USB to Serial Adaptor TR-900T Switching Power Supply [MD1032]


The TR-900T switching power supply is used to power targets from 100V to 240V power supply ranges.

[MD3607]

This is the adaptor cable used to convert a USB port on a laptop to a serial port. This is generally used for newer laptops that do not have serial ports.

Parallel Port Card Bus


[MD3610]

The parallel port card bus gives newer scoring devices a parallel port connection.

12v DC to AC inverter

[MD1019]

The 400 watt, 12V inverter is used to convert Direct Current to Alternating Current and is part of the accessory kit. It is designed for use with a LMTS scoring device or with LMTS static targets (i.e. 460, MUTAR Alt-C, MUTAR MGTS). The inverter has both a cigarette lighter adapter and alligator clips to attach to a 12V battery.

LMTS SYSTEM SOFTWARE

New System Software (All Systems)


Software provided via CD to control LMTS equipment.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

49

LMTS - Components & Accessories


LMTS TARGETS

TR-900T Target

[MD3009]

The TR-900T target is the central component of the 360 and 460 Series of Laser Marksmanship Training Systems. The TR-900T detects laser pulses and transmits laser impact data to a scoring device for analysis displaying the exact location of laser hits in the software. The TR-900T can be used in a single-target configuration or can also be daisy-chained with up to nine additional targets. The target has a buzzer which allows hits to be heard. The target comes complete with power supply and standard overlay.

TR-700 Target [MD3008A]


The TR-700 target is the central component of the Mini-RETS, 110, 115, and 130 Systems. The TR-700 can be powered by 4 AA batteries or can be connected to an external 9VDC power source. Laser pulses are detected on the target face and an LED hit counter displays the number of laser impacts, up to ninety-nine. A buzzer can also be enabled that creates an audible beep when the target is hit by the laser. The target includes a timing function that enables hit detection for a specific period of time. The target comes complete with power supply.

Basic 3-D E-Type Target

[MD3015]

Basic 3-D F-Type Target

[MD3020]

This version of the E-Type target is a component of the Wired and Wireless LCCATS systems and includes the LCCATS E-Type Target only. The targets receive laser hits and transmit data to the LCCATS scoring device through either the CCIU (Wired LCCATS) or the Wireless Interface Box (WIB) (Wireless LCCATS).

This version of the F-Type target is a component of the Wired and Wireless LCCATS systems and includes the LCCATS F-Type Target only. The targets receive laser hits and transmit data to the LCCATS scoring device through either the CCIU (Wired LCCATS) or the Wireless Interface Box (WIB) (Wireless LCCATS).

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

50

LMTS - Components & Accessories


LMTS TARGETS

25/15m Reflective Target

[MD3534]

The Reflective Target is constructed of weatherresistant corrugated plastic coated with a highly reflective surface. The target is reversible with a 25 meter zero target image on one side and a 15 meter zero target image on the reverse side. The surface facilitates visual feedback when the laser hits its surface, even in bright sunlight and is used as an aid in marksmanship training.

Target 390 - TranStar II (Full size) [MD3660]


Paper target used with the 390v6 and Linking Systems and is a replica of the Full Size TranStar II target.

Target 390 - TranStar II (Scaled) [MD3660-S]


Paper target used with the 390v6 and Linking Systems and is a scaled version of the TranStar II target.

Reflective Target Mini

[MD3535]

The Mini-Reflective Target is part of the 130-1E Warrior Kit. The target is reversible with a 15 meter zero target image on one side and a 10 meter boresight target image on the reverse side.

Target 390 - M9 (Full size)

[MD3661]

E-Type silhouette paper target used with the 390v6 and Linking Systems.

190 System Extra Paper Targets

Target 390 - M9 (Scaled)


[MD3536]

[MD3661-S]

The 190 Personal Marksmanship Training System includes 10 ring, silhouette, and deer targets. Additional paper targets can be purchased to include many targets for law enforcement and hunting customers.

E-Type silhouette paper target used with the 390v6 and Linking Systems.

Target 390 - Modified QIT (Full size) [MD3688-1F]


Paper target used with the 390v6 and Linking Systems and is a replica of the Full Size QIT target.

Target Set 190 System

[MD3537]

The 190 System Target Set is the standard 3 target set included with the 190 System. The 3 targets include 10 ring, silhouette, and deer.

Target 390 - Modified QIT (scaled) [MD3688-1]


Paper target used with the 390v6 and Linking Systems and is a scaled version of the QIT target.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

51

LMTS - Components & Accessories


LMTS TARGETS

Target 390 - E Silhouette (Full size) [MD3688-2F]


Paper target used with the 390v6 and Linking Systems and is a replica of the Full Size E Silhouette target.

Target 390 - B27E Blue (Full size) [MD3688-5F]


Paper target used with the 390v6 and Linking Systems and is a replica of the Full Size B27E Blue target.

Target 390 - E Silhouette (scaled) [MD3688-2]


Paper target used with the 390v6 and Linking Systems and is a scaled version of the E Silhouette target.

Target 390 - B27E Blue (scaled) [MD3688-5S]


Paper target used with the 390v6 and Linking Systems and is a scaled version of the B27E Blue target.

Target 390 - 5 Bullseye (Full size) [MD3688-3F]


Paper target used with the 390v6 and Linking Systems and is a replica of the Full Size 5 Bullseye target.

Target 390 - B21E Silhouette (Full size) [MD3688-6F]


Paper target used with the 390v6 and Linking Systems and is a replica of the Full Size B21E Silhouette target.

Target 390 - 5 Bullseye (scaled) [MD3688-3S]


Paper target used with the 390v6 and Linking Systems and is a scaled version of the 5 Bullseye target.

Target 390 - B21E Silhouette (scaled) [MD3688-6S]


Paper target used with the 390v6 and Linking Systems and is a scaled version of the B21E Silhouette target.

Target 390 - Q (Full size)

[MD3688-4F]

Paper target used with the 390v6 and Linking Systems and is a replica of the Full Size Q target.

Target 390 - ICE QT (Full size) [MD3688-7F]


Paper target used with the 390v6 and Linking Systems and is a replica of the Full Size ICE QT target.

Target 390 - Q (scaled)

[MD3688-4S]

Paper target used with the 390v6 and Linking Systems and is a scaled version of the Q target.

Target 390 - ICE QT (scaled) [MD3688-7S]


Paper target used with the 390v6 and Linking Systems and is a scaled version of the ICE QT target.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

52

LMTS - Components & Accessories


SAFESHOT Upper Receivers & BARRELS

SafeShot Upper Receivers and Barrels bring unparalleled realism and safety to marksmanship, close-quarter and tactical training. By replacing the upper receiver or barrel of the weapon without any other modification they allow the trainee to use their own firearm while maintaining original trigger pull to duplicate live-fire function. Combined with the Laser Marksmanship Training Systems (LMTS) lasers and targets, the true point-of-impact of the laser beam provides recordable accuracy that takes blank-fire to a new level of realism. Chambering only patented SafeShot lead-free blanks of the same caliber, they permit training with added safety, whether indoor or in the field, while providing the recoil, sound, and smell of live-fire - everything but the bullet.

SafeShot M-16 Upper Receiver

[MD4001]

SafeShot M16 Upper Receivers chambers only patented 5.56 SafeShot lead-free blanks of the same caliber. The SafeShot M16 upper receiver is made of blue-anodized metal allowing for immediate recognition as a training unit. The one-piece barrel prevents muzzle discharge and will not affect the lower receiver.

M240 SafeShot Barrel

[MD4002]

Chambering only patented 7.62 SafeShot lead-free blanks of the same caliber, the one piece M240 barrel prevents muzzle discharge and will not affect the lower receiver.

M249 SafeShot Barrel

[MD4003]

Chambering only patented 5.56 SafeShot lead-free blanks of the same caliber, the one piece M249 barrel prevents muzzle discharge and will not affect the lower receiver.

SafeShot M4 Upper Receiver [MD4004]


SafeShot M4 Upper Receivers chambers only patented 5.56 SafeShot lead-free blanks of this caliber. The SafeShot M4 upper receiver is made of blue-anodized metal allowing for immediate recognition as a training unit. The one-piece barrel prevents muzzle discharge and will not affect the lower receiver.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

53

LMTS - Components & Accessories


NON-GUNS & SAFESHOT BARRELS

SafeShot Upper Receivers and Barrels bring unparalleled realism and safety to marksmanship, close-quarter and tactical training. By replacing the upper receiver or barrel of the weapon without any other modification they allow the trainee to use their own firearm while maintaining original trigger pull to duplicate live-fire function. Combined with the Laser Marksmanship Training Systems (LMTS) lasers and targets, the true point-of-impact of the laser beam provides recordable accuracy that takes blank-fire to a new level of realism. Chambering only patented SafeShot lead-free blanks of the same caliber, they permit training with added safety, whether indoor or in the field, while providing the recoil, sound, and smell of live-fire - everything but the bullet.

M-16 Non-Gun

[MD4011]

These are modified Classic Army brand M16 Rifle AEG (Airsoft Electric Gun). They are external replicas of standard M16A2 Rifles with very similar weight and balance. These Non-Guns are nearfully functional M16 rifle training devices; they will accept the training magazines provided with them. The trigger, safety/selector switch, magazine release, front and rear sights, all function normally. Upon trigger activation the Non-Gun will cycle itself by means of an internal electric motor powered a rechargeable battery pack that is concealed in the butt stock.

Components
M-16 Non-Gun w/ Magazine Carrying Handle
[MD4008]

Battery

Battery Charger

SafeShot M-9 Beretta Barrel

The SafeShot M9 training barrel chambers only patented 9mm SafeShot lead-free blanks of this caliber. The M9 barrel allows the shooter to use original magazine and recoil springs and there is no need to alter any component of the firearm other than the barrel. The shooter uses their original pistol receiver and sights for easy transition from blank-fire to live-fire. The SafeShot M9 barrel has threads in the muzzle end to accept an LMTS LT-300 Laser.

SIG P228 Barrel

[MD4022]

The SIG P228 SafeShot training barrel chambers only patented SafeShot lead-free blanks of the .38/9mm caliber. The SIG P228 SafeShot barrel has threads in the muzzle end to accept an LMTS LT-300 Laser Transmitter. This barrel includes a 13 lb. reduced-power recoil spring.

GLOCK 17 Barrel

[MD4010]

The GLOCK 17 SafeShot 5 inch training barrel chambers only patented SafeShot lead-free blanks of the .38/9mm caliber. The GLOCK 17 SafeShot barrel has threads in the muzzle end to accept an LMTS LT-300 Laser Transmitter.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

54

LMTS - Components & Accessories


SAFESHOT BLANKS

All SafeShot Blanks are manufactured and configured to chamber only in SafeShot-equipped firearms of the same caliber. They are designed for repetitive fire, replicated live-fire. They contain environmentally safe lead-free priming that accord well with indoor usage. SafeShot blank ammunition simulates the recoil, sound, and smell associated with live firing. Combined with the Laser Marksmanship Training Systems (LMTS) lasers and targets, the true point-of-impact of the laser beam provides recordable accuracy that takes blankfire to a new level of realism.

5.56mm Blanks, Linked, Case, 800 rnds [MD4251]


SafeShot 5.56mm linked blanks can be used in conjunction with SafeShot M249 barrel and MP400MG lasers. They are packaged in 100-round belts, eight belts per canister.

7.62mm SafeShot BFS Blank, Case 800 rnds


[MD4255]

SafeShot 7.62mm blanks can be used in conjunction with SafeShot M16 and M4 barrels and MP-400B lasers. The blanks come in a case of 800 linked blank rounds for 7.62 caliber SafeShot barrel.

5.56 Blank Ammunition


[MD4254]

SafeShot 5.56mm blanks can be used in conjunction with SafeShot M16 and M4 barrels and MP-400B lasers. They are packaged in boxes of 20-rounds and supplied in 1200-round cases.

9mm Blank Ammunition


[MD4256]

SafeShot 9mm blanks can be used in conjunction with a SafeShot 9mm barrel and LT-300 internal laser. They are packaged in boxes of 50-rounds and supplied in 1000-round cases.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

55

LMTS - Equipment Training


LMTS - EQUIPMENT TRAINING SERVICES

New Equipment Training CONUS and OCONUS


One to five day training sessions can be purchased to help new users set up and learn how to maximize utilization of their new equipment. Sessions are individually priced depending on the number of trainers and days. The preferred ratio of instructor to student is one (1) instructor to five (5) students. Classes are taught using the customers equipment. The customer is responsible for ensuring the equipment is on-site and functioning at the time of training.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

56

Interoperable Deployable Communication Systems

SHERPA Expedition

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to ttg.info@L-3com.com.

57

Interoperable Deployable Communication Systems


SHERPA series

Expedition

[MD5000]

The SHERPA Expedition provides a lightweight, flexible, integrated solution to meet emergency communications needs disaster recovery, emergency management, continuity of operations, rapid infrastructure. This flexible core provides voice, video, and data in a single, integrated package and serves the role as a gap-filler for those needing flexible communications fast. SHERPA, shouldering the load.

Traveler [MD5006]
The SHERPA Traveler is the latest edition to the SHERPA family of interoperable deployable communications systems. The Traveler is the ideal communications tool to provide incident commanders immediate, high-quality communications to allow rapid establishment of command and control. Designed to provide immediate communications in an austere environment, the SHERPA Traveler is a self-contained module that securely provides up to 10 wired or wireless users Voice over IP, Radio over IP, and Internet connectivity to the home network. The Traveler is designed to go anywhere rapidly: it can be carried by a single person, stows in typical airplane overhead storage, and supports universal AC voltage, any vehicles DC power, and even has an internal battery.

TABLE OF CONTENTS

All products, components and specifications are subject to change without notice. To order or for pricing please contact L-3 EOTech, 443-285-4700 or ttg.info@L-3com.com.

58

EOTech

7142 Columbia Gateway Drive Columbia, MD 21046 Tel: 443-285-4700 ttg.info@L-3com.com

TABLE OF CONTENTS

This material is L-3 EOTech general capabilities information and does not contain any controlled technical data as defined within the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR).

Potrebbero piacerti anche