Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
observed values Volts (V) Amps (A) Wire Feed Rate Filler Metal Diameter Travel Speed (est) IPM Weld Progression interpass cleaning?
1st Pass
2nd Pass
3rd Pass
4th Pass
5th Pass
6th Pass
7th Pass
8th Pass
9th Pass
10th Pass
11th Pass
Backing Gas
type, flow rate, composition
Trailing Gas
type, flow rate, composition
Date:
\\vboxsrv\conversion_tmp\scratch_1\133700587.xls.ms_office
Date:
Welding process(es) is/are listed on the aplicable WPS; i.e. GTAW, GMAW, FCAW, GMAW-CRO, RSW, LBW, etc.
if backing is used, list whether it is base metal, left-in-lplace backing strip, removable backing strip, etc. If no backing is used, indicate "None".
observed values Volts (V) Amps (A) Wire Feed Rate Travel Speed (est) Weld Progression interpass cleaning?
These readings come directly from the welding machine and are entered for each weld pass. These readings come directly from the welding machine and are entered for each weld pass. Currrently GMAW and GMAW-CRO only! These readings come directly from the welding machine wire feeder. Time welding operation for one minute and measure inches per minute for the Travel Speed.
Either uphill or downhill; each weld pass may be different if WPS states. Did the welder clean, grind, or wire brush between passes?
Filler Metal Current / Polarity Shielding Gas Backing Gas Trailing Gas Base Metal(s) Coupon DIA / THK
List the Manufacturer, Alloy, Diameter, amnd SFA No. of the filler metal being used.
AC or DC; Electrode Negative or Positive. Record the Shielding gas number, the mixture, and the flow rate in CFH when used. Record the Backing gas number, the mixture, and the flow rate in CFH when used.
Record the Trailinggas number, the mixture, and the flow rate in CFH when used.
Record the Material Specification of the base Metal(s).
If Plate, list the thickness; if Pipe, list the Diameter and wall thickness.
Craig Wesson will perform visual inspection of completed coupon until a weld quality training class is given.
Sign here
Date:
1G
2G
3G
4G
1G Rotated
2G
5G
Fillet Welds in Plate -- Test Positions
6G
1F
2F
3F
4F