Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Catalogue Content
Company Profile Girder Clamps Beam Trolleys Universal Super Clamps New Products Useful Information 1 2 - 15 16 - 20 21 22 - 24 25 - 28
www.superclamp.co.uk
Specialists in:
SUPERCLAMP Adjustable Girderdogs Geared Runway Beam Trolleys Swivel Jaw Girder Clamps Adjustable Runway Beam Trolleys Adjustable Monorail Clamps Fixed Jaw Adjustable Clamps Universal Side Load SUPERCLAMPs
The SUPERCLAMP Trade Mark is one of the leading names in lifting equipment attachments World Wide. At Riley Lifting our SUPERCLAMP products are synonymous with both practical design and high quality.
Our design and manufacturing expertise at Riley Lifting, backed up by the professional support of our distributor network, means that SUPERCLAMP products are some of the most cost effective labour and time saving lifting devices of this type in the World Market today. Riley Lifting are committed to developing the most practical lifting equipment attachments whilst keeping safety, speed of application and user requirements in mind. We are constantly developing and expanding our SUPERCLAMP product range to ensure that we are able to meet the ever changing needs of our customers. It can be loaded at any angle and The Universal SUPERCLAMP is a unique lifting gear product which is designed not only for vertical use, but for side load applications where conventional clamps are unsuitable. Unlike other clamps the Universal SUPERCLAMP is extremely versatile in application and can only be used for lifting, pulling or as an anchor point.
Company Profile
eliminates the use of spreader beams in various lifting operations. With a low headroom anchor point, it can be used as a single or twin point lifting, giving positive grip and quick applications combined with lightweight construction without the use of additional tools.
01
A 96-190 96-190
B 38 38
E 22 22
G 220 220
02
Girder Clamps
A 20 32 32 32
D 10 15 20 25
Dimensions E G 52 40 60 48 74 57 87 67
J 50 70 76 80
K 8 10 10 10
L N/A N/A 6 8
03
Girder Clamps
A 66 74 74 92 92 110 110
B 4 6 6 8 8 12.5 12.5
04
Girder Clamps
A 16 16 20 25 25
H 15 20 25 20 20
05
Girder Clamps
WLL 2032kg 3048kg 3048kg 3048kg 4064kg 5080kg 5080kg 7112kg 10160kg 6096kg 15241kg 15241kg
Adjust 76-190 76-190 76-190 127-350 150-254 150-305 76-190 101-228 203-457 203-457 203-457 406-610
A 125 125 130 130 130 140 130 140 140 140 170 175
C 22 22 22 22 22 32 22 42 42 42 50 63
Dimensions D E 90 188 90 188 102 250 102 375 112 327 116 373 116 237 118 323 118 498 116 498 116.5 611 116.5 795
G 275 275 275 560 410 410 295 410 560 560 660 810
H 20 20 20 20 25 25 25 32 32 25 40 40
K 250 250 268 373 332 360 300 382 476 459 616 673
Weight 4kg 5kg 8kg 11.5kg 11kg 15kg 10kg 17.5kg 28kg 18.8kg 49.5kg 58.5kg
06
Girder Clamps
C 6 10 10 12.5 20
Dimensions E G 25.4 348 25.4 348 25.4 348 25.4 348 25.4 348
H 20 25 25 25 32
07
Girder Clamps
B 12.5 12.5 15 15 20 20
Dimensions C D E 116 40 756 116 40 795 130 45 611 130 45 795 130 45 624 130 45 785
08
Girder Clamps
Model S7 S8
A 120 130
B 6 10
E 275 410
G 298 392
09
Girder Clamps
A 120 130
B 6 10
E 275 410
G 366 457
10
Girder Clamps
A 65 65 86 86
B 90 90 135 135
C 20 20 25 25
Dimensions D E G 312 10 145 140 10 168 463 12.5 214 523 12.5 271
H 16 16 20 20
J 76 76 90 90
K 15 15 20 20
11
Girder Clamps
Model Model AC1 AC1 AC2 AC2 AC3 AC3 AC4 AC4
WLL WLL 508kg 508kg 1016kg 1016kg 1524kg 1524kg 3048kg 3048kg
A 4 6 8 10
A 4 6 8 10
B 65 69 86 90
B 65 69 86 90
C C 70 70 70 70 90 90 102 102
Dimensions Dimensions D D E E G G 206 15 15 102 96 206 206 15 15 96 96 206 270 19 19 73 73 270 343 25.4 25.4 101101 343
JJ 16 16 16 16 20 20 20 20
Weight Weight 4.5kg 4.5kg 5.5kg 5.5kg 11kg 11kg 21.5kg 21.5kg
12
Girder Clamps
Model P1 P2 P3 P4 P5 P6 P7 P8 P9
WLL 1016kg 1524kg 2032kg 3048kg 3048kg 3048kg 3048kg 4064kg 4064kg
Adjust 63-115 101-178 127-228 178-279 203-330 228-381 254-432 305-482 406-610
A 6 8 8 8 8 8 8 8 8
B 72 75 75 95 95 95 95 118 118
Weight 7kg 12.5kg 16.5kg 26.5kg 31.5kg 36kg 50kg 63.6kg 76.6kg
13
Girder Clamps
A 66 102
B 6 10
C 104 142
G 82 87
H 16 20
K 289 298
14
Girder Clamps
Model R1 R2
A 90 116
B 85 110
C 6 12.5
G 275 275
H 277 311
K 192 192
15
Girder Clamps
A 14 21 21
D 46 54 54
Dimensions E G 70 16 70 16 70 16
H 6 6 8
16
Beam Trolleys
Model B1 B2 B3
M 12.5 15 15
N 33 34 41
17
Beam Trolleys
A 33 34 41 50 50
Dimensions D G H 133 82 475 176 125 560 200 145 560 246 190 785 292 220 785
M 12.5 15 15 20 20
18
Beam Trolleys
Model A1 A2 A3
H 82 88 109
J 30 40 40
K 32 38 38
19
Beam Trolleys
A 14 21 21 21 21 33 33
B 45 45 45 54.5 54.5 82 82
Dimensions D E G 171 154 80 171 154 80 171 154 80 183 180 100 183 180 100 222 246 130 222 246 130
J 8 10 10 10 10 12.5 12.5
20
Beam Trolleys
Universal SUPERCLAMP
For side load applications where conventional SUPERCLAMPS are unsuitable. The universal SUPERCLAMP has been designed not only for vertical use, but also for side load applications, where conventional clamps are not suitable. This clamp is truly versatile in application and can be used for lifting, pulling or as an anchor point. It can be loaded at any angle and eliminates the use of spreader beams in various lifting operations. With a low headroom anchor point, it can be used as a single or twin point lifting, giving positive grip and quick application combined with lightweight construction. WARNING: Do Not Exceed Working Load Limits or use this equipment for lifting Flat Plate Sections (not to be used as a plate lifting clamp).
B N/A 10 10 10 10
C 70 70 75 75 75
D 48 48 48 102 102
J 28 28 38 38 38
K 20 10 25 25 25
21
Universal Clamp
For use on beam flange with a minimum of one metre inside radius WLL 10160kg (10 Ton). Weight: 113.5kg
22
New Products
Model EL1
WLL 200kg
Adjust 114-204
Weight 5.8kg
23
New Products
Model ELL1
WLL 200kg
Adjust 114-204
Weight 4.5kg
24
New Products
Re-assemble
D) Install new adjusting screw winding left and right hand side frames equally on to screw. E) Replace shackle and shackle bolt, fit new shackle bolt locking nut. F) Wind on handle and secure with new spring pin. G) It is advisable that all parts be well lubricated before being put into place.
Re-assemble
E) Re-assemble gearing as above in reverse order.
No 01
Description Side Frame Adjusting Screw Securing Pin Handle Washer Nut Spacer Shackle Bolt
Qty 2 4 1 1 1 1 4 1 4
Useful information
Re-assemble
D) Wind on new knuckles left and right hand, ensuring both are equally to centre land area of screw. E) Re-fit onto clamp side frames using securing pins provided. F) Wind on handle and secure with new spring pin, lubricate with grease.
02 03 04 05 06 07 08 09
25
To Replace Threaded Adjusting Screws For Models BA1 - BA3, B1 - B3, GBT1 - GBT5 Strip Down
A) Remove handle securing pin using correct diameter punch, wind off handle and locking collar. B) Remove shackle pin, wind off left and right hand wheel plates, (it may be necessary to cut away damaged area of adjusting screw to allow screw to be removed).
No 01 02 03 04 05 06 07 08
Description Side Frame Link Arm Adjusting Screw Locking Collar Handle Shackle Wheel/Spindle/Bearing Spacer Washer Locking Nut Plain Nut Spring Washer Securing Pin Bolt Split Pin Washer
Qty 2 4 1 1 1 1 4 1 4 1 4 4 1 1 4 4
Re-assemble
C) Fit new adjusting screw winding left and right hand wheel plates equally to centre land area of screw. D) Replace shackle and shackle pin. Renew shackle pin self locking nut. E) Wind on locking collar and handle. Secure handle with new spring pin. Lubricate with grease.
09 10 11 12 13 14 15 16
To Replace Bearings on Models BA1 - BA3, B1 - B3, GBT1 - GBT5, A1 - A3 Strip Down
A) Remove wheel and wheel axle from wheel plates. B) Press out axle from bearing. C) Remove internal circlip from back of wheel and press out old bearing.
Useful information
Re-assemble
D) Ensure all components are cleaned thoroughly and press in new bearing. E) Replace internal circlip. F) Press wheel axle into bearing (ensuring wheel pins freely on axle). G) Fit completed assembly back onto wheel plate.
26
2) Checklist:
Is any part of the equipment distorted? Are any cracks visible, or is extensive corrosion evident? Is any wear evident at suspension points, wheels, shackles, gears, pivots, pins, bolts, threads, springs, or other moving part? Are locking arrangements functional and safe? Are the safe working load, the serial number and other markings legible? Have all inspections or tests been regularly recorded? If not, re-certification should be carried out before use. Does the SUPERCLAMP equipment carry its original identification marking?
Special Products
Our drawing office is staffed by experienced Design Engineers who can solve your most difficult problems.
Specials
1) Spark Proof Girder Clamps and Trolleys. 2) Anti-Corrosive Girder Clamps and Trolleys. 3) Man Carrying Girder Clamps and Trolleys. 4) ForkLift Attachments 5) Gantries. 6) Non-Marking Clamps. 7) Low Headroom Clamps. 8) Clamps and Trolleys with Non-Standard Working Load Limits. 9) Clamps and Trolleys to suit Customer Requirements.
27
Useful information
Important Information
Health & Safety Suppliers are generally required to make available information relating to articles supplied to ensure that when put to proper use they are safe and without risk to health. Experience over many years has not shown up any particular problems with regard to Health and Safety in connection with the products we manufacture and supply providing: 1) They are used for the purpose for which they were designed. 2) They are not loaded beyond their related safe working load. 3) They are properly maintained. 4) They are regularly inspected and tested in accordance with the relevant statutory regulations. 5) They are used by competent persons trained in their applications.
Warning Our products are marked with a Maximum Safe Working Load which must not be exceeded. The manufacturers do not accept any liability for damages which may result from the product being used in excess of the Safe Working Load. Ensure that existing end stops on runway beams will accommodate SUPERCLAMP Trolleys. On occasions we supply replacement component parts for articles of Lifting Equipment but we do not accept any responsibility for these unless they are installed by a person with appropriate knowledge and ability and the Statutory tests and inspections are carried out on completion of repair. Unless we are informed at the time of enquiry and order regarding particular hazardous environmental conditions all equipment is supplied on the assumption that it will be used in normal atmospheric and temperature conditions as applicable within the United Kingdom.
Useful information
Safe Working Load This is the maximum load which can be applied to the product in service. It is of the utmost importance to Health and Safety to ensure that SUPERCLAMP products are only attached to structures, materials or other lifting components which are authentically and authoritatively approved and recommended to carry or sustain the maximum safe working loads to be applied. All of our devices exceed the Title 29CFR Part 1910, 1918 and 1926 of the Federal and O.S.H.A. Codes and Regulations as applicable.
28
www.superclamp.co.uk