Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Ferrodetector PS 30 / PS 35
Intelligent rebar detection for maximum efficiency
Applications
Locating reinforcement, copper or aluminium pipes in concrete Locating copper or aluminium pipes in brick walls Determining the position and depth of existing rebars for post - installed rebar connections (PS 35) Checking concrete cover over reinforcement for trouble-free anchor setting (PS 35)
Technical data
PS 30 Detection range (depth): Rebar Non-ferrous metal objects (e.g. copper, aluminum) Localization accuracy Depth measurement accuracy: 5 - 60 mm 60 - 80 mm 80 - 100 mm 100 - 120 mm Minimum spacing between objects: 5 - 35mm > 35mm Battery life IP protection class Power source
FLEET MANAGEMENT
PS 35
5 - 120 mm 5 - 80 mm
5 - 120 mm 5 - 80 mm
Advantages
Avoids damage to rebar, copper and aluminium pipes when drilling Avoiding hitting rebar increase drill bit lifetime High depth measurement precision for rebar (PS 35) Simple, user-friendly operation. As simple as one button operation for PS 30 Clear indication of detection with the red / green LED Ruggedly built for jobsite use
10 mm
10 mm
3 mm 5 mm 7 mm 11 mm
55mm Distance / Depth factor > 1.5 Up to 8 h (Alkaline batteries) IP 54 4 AAA batteries (1.5 V) 237 x 104 x 47 mm 420 g
55mm Distance / Depth factor > 1.5 Up to 8 h (Alkaline batteries) IP 54 4 AAA batteries (1.5 V) 237 x 104 x 47 mm 450 g
Ordering
Order designation PS 30 Ferrodetector PS 35 Ferrodetector Package content Equipped with Ferrodetector, soft pouch, hand strap, 4 AAA batteries, 2 markers, producer certicate and operating instructions in a cardboard box Equipped with Ferrodetector, soft pouch, hand strap, 4 AAA batteries, 2 markers, producer certicate and operating instructions in a toolbox N0-risk drilling No more time lost due to rebar hits and no more bills for repair to copper water pipes. Item No. 00407920 00407961
Place anchors with confidence The Hilti PS 35 indicates the precise depth at which you can expect to encounter rebar in the concrete. For example, if the PS 35 shows the depth is 65 mm you know you can set a 55 mm anchor with no problem.
Accurate coverage depth measurement For quality assurance, damage analysis or evaluation of the situation before renovation, the PS 35 is one of the cheapest and easiest ways of obtaining accurate reliable coverage depth information.
00800
8228 8118 (Mon - Fri 8:30 am - 6:00 pm / Sat 8:30 am - 1:00 pm)
20
Measuring Systems
Applications
Consistently reliable measuring results for all Hilti measuring tools. Rotating Laser Multidirectional Laser Laser range meter Detection tools
Retrieval, adjustment, certification and return transport of the measuring tool through the Hilti Calibration Service.
Calibration Label
Calibration certificate and dated inspection plate (ISO 900X) confirm that the measuring tool again functions precisely and reliably.
Calibration certificate
Can be issued for all products over the entire lifespan of the product concerned.
Calibration certificate I PL/PA/POL Calibration certificate I PD Calibration certificate I PM/PML/PMP/PMC Calibration certificate I PS Calibration certificate I PR/PRE/PRI Calibration certificate I Ferroscan
Calibration certificate II PL/PA/POL Calibration certificate II PD Calibration certificate II PM/PML/PMP/PMC Calibration certificate II PS Calibration certificate II PR/PRE/PRI Calibration certificate II Ferroscan
00800
8228 8118 (Mon - Fri 8:30 am - 6:00 pm / Sat 8:30 am - 1:00 pm)
26
Measuring Systems
Rotating Lasers
Range Meters
Detection Systems
Trustworthy detection
For the objects distributed under the wall, It's not always as "neat" as expected. With Pulse Power, more than 1000 pulses are excited from the detector, so that more signals can be collected for calculation, which results in highest accuracy and reliable object detection.
00800
8228 8118 (Mon - Fri 8:30 am - 6:00 pm / Sat 8:30 am - 1:00 pm)
FLEET MANAGEMENT
263
00800
8228 8118 (Mon - Fri 8:30 am - 6:00 pm / Sat 8:30 am - 1:00 pm)
11
* Heavy diamond tools with operating hours counter: No Costs for 1 year or 100 hours (whatever is reached first). Angle grinders & ST 1800 corded screw drivers, PD 5 laser range meter & breakers: No Costs for 1 year. DAG 100-S angle grinder: No costs for 1 year or 2 times of repair (whatever is reached first), and is excluded from Repair Cost Limit. Lithium-ion batteries: are excluded from Repair Cost Limit. Angle grinders: No Costs for 1 month after each repair under Repair Cost Limit. NiCd/NiMH batteries, accessories and filters are excluded from Hilti Lifetime Service. Power-actuated fastening tools: pistons and buffers are excluded from Hilti Lifetime Service. Measuring Systems: calibration services are excluded from Hilti Lifetime Service.
2 Years
NO COSTS Lifetime
MANUFACTURERS
WARRANTY
00800
8228 8118 (Mon - Fri 8:30 am - 6:00 pm / Sat 8:30 am - 1:00 pm)
264