Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Hubbell Power Systems, Inc. 1850 Richland Avenue, East Aiken, SC 29801 USA Phone: 573-682-5521 Fax: 573-682-8714 http://www.hubbellpowersystems.com E-mail: hpsliterature@hubbell.com
www.hubbellpowersystems.com
Never Compromise TM
Cable Accessories
NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice.
Supplemental C-8A
Application:
Hubbell Parkingstand Lightning Arresters contain a 200 amp loadbreak interface that conforms to IEEE Std. 386 Fig 5 (15kV). A Hubbell arrester installed at the end of a radial system or at both ends of an open point in a loop circuit will provide excellent protection against high voltage surges resulting from lightning or switching. When combined with an Ohio Brass PVR (Riser Pole) arrester, optimum protection can be achieved. They are fully shielded and submersible, either continuously or intermittently, to a depth of 6 feet (2m).
Installation:
The Hubbell Parkingstand Lightning Arrester should be installed utilizing a shotgun type hotstick.
Performance Characteristics
Tests were performed in accordance with applicable sections of IEEE Std. C62.11 (Metal Oxide Surge Arresters for Alternating Current Power Circuits) with test levels chosen that represent typical underground distribution systems.
Features:
The insulating rubber body consists of peroxide-cured EPDM rubber that offers reliability and the molded shield consists of conductive peroxide-cured EPDM that meets the requirements of IEEE Std. 592 for exposed semi-conducting shields. The drain wire tab provides a contact point to attach a #14 ground wire to ensure the shield is at ground potential and maintains deadfront construction. The fiberglass wrap ensures that the MOV block stack (same MOV blocks found in Ohio Brass overhead arresters) remains in one piece and prevents the blocks from breaching the side wall should the arrester fail. An ID band around the body of the arrester provides clear visual identification of arrester MCOV and duty cycle ratings. The flexible lead is #4 AWG copper rope lay conductor, featuring a soldered end to prevent fraying. A 36 inch length is standard, however, other lead lengths are available. Please contact your Hubbell sales representative for other lead length options. Page 2 | June 2012
Supplemental C-8A
Design Tests
High Current, Short Duration Low Current, Long Duration Operating Duty Cycle Safe Failure Mode 2 discharges of 65kA Crest 20 Surges of 75A for 2,000 msec 22 Operations of 5kA Crest 8 x 20 msec Verify blocks do not breach sidewall
reliability
Page 3 | June 2012
Dimensionals
Catalog IEEE Std. 386 Number Interface 215PLA03 215PLA06 215PLA09 215PLA10 215PLA12 MCOV Rated (kV) Voltage (kV) 2.55 5.1 7.65 8.4 10.2 3 6 9 10 12 Weight lbs (kg) 5.6 7.4
15kV Class
4.6
(2.09)
215PLA _ _
MCOV 2.55 5.1 7.65 8.4 10.2 RATING = 03 = 06 = 09 = 10 = 12