Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
5
Rev.3.May.31.2006
This is an attempt to improve on the Tonepad Rebote2 Delay by providing better filtering. Shortest delay time is 10mS. Maximum delay time is 580mS, repeats become a little dirty with longest delay times, they are clean on shorter delay times. Off board components except for the potentiometers are not shown on the layout. Trademarks are property of their owners. Visit tonepad.com for more!
50k-B 100k-B 25k-B
READY TO TRANSFER
DELAY GND IN .082 1M +9v L E V E L 510k 240k 510k 5pF 1uF + 33k IC 2 IC 2 12k 12k REPEATS OUT 100k .01 1uF + 51pF 1uF +
2
5.2ETOBER
47uF IC3
16 15 14 13 12 11 10 9 1 2
1k 47uF 560pF .001 .082 .082 1uF 12k 12k 47k 24k 12k 12k 12k .01 12k .027
.01 .01
47uF 12k +
9v INPUT
Delay Out
AC ADAPTOR
12k
.082
Resistors 2 - 1k 1 - 2k7 (2.7k) 8 - 12k 1 - 15k* 3 - 24k 1 - 33k 1 - 47k 1 - 100k 1 - 240k 2 - 510k 1 - 1M
24k
.082 9
2 3 IC2a 4 33k 1k Vb 1
1uF
1M
240k Vb
DLY .
.1
100k
.1uF 47k 560pF 1uF 12k .027 12k .01 12k Delay Out 15 2399 Delay In
15k 24k .001 1uF 12k .01 12k .01 12k 2k7 14 2399 .01 1uF
3 1 2
16
13
100k-B
25k-B
3 1 2
REP.
LEVEL
Layout and presentation by Francisco Pea 2001-2005. All rights reserved. Authorization for personal use only, any commercial use is forbidden. Permission for posting/serving limited to http://www.tonepad.com Permission refused for posting from other sites.
Parts List NOTES: 5 volt regulator IC3 must be oriented so that its ICs Pots pins match the layout. (in case of using 1,000mA IC1 - PT2399 1 - 25k lin. regulator) IC2 - TL072 1 - 50k lin. * Can be changed from 15k to 10k to get endless 1 - 100k lin. repeats with repeats pot maxed. If this results in undesired runaway repeats, change it to 11k, or a IC3 - 5v positive Regulator 6.8k resistor in series with a 5k trimpot adjusted (78L05) for endless repeats. Schematic +9v +5vDC +5vDC
LAYOUT
MOC.DAPENOT
5002 PF
0.1
+ + 47uF
3
PT2399 PT2399
4 5 6 7 8
OUTPUT