Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
J4 Oilfield Services High Pressure Pump Trucks (20,000 psi) Patented Lay Down Units Hydraulic Torque Wrenches, NU/ND 15K Adjustable Dual Choke Manifolds High Pressure Triplex Testing Pumps High Pressure Steam Cleaners And other Innovative Specialties (www.j4oilfield.com)
Designed to blend polymer solutions, sand plugs and high solid concentration LCM pills
Features
Twin 4 x 5 centrifugal circulating pumps (2,000 gpm each - total tank recycle rate less than one minute) creating high shear rates and rapid polymer hydration. Pump #1 direct drive by a V6-71 Detroit Diesel Pump #2 hydraulic driven/hydraulic fluid cooler. High efficiency jet hopper to facilitate dry polymer blending option (reduce chemical costs)
Twin pump configuration allows fluid engineers to independently blend 2 products at various rates of mixing with multiple port and starboard 3 and 4 inch discharge and suction ports Example: Fully hydrate high viscosity sweeps while blending friction reducer solution to optimize circulating fluid rheological properties. Split tank configuration can be set up to function as a 50 bbl tank if required
Designed to blend polymer solutions for: Reduction of circulating fluid pump pressure High viscosity sweeps for hole cleaning Sand plugs
Zonal Isolation
High solid concentration LCM pills
Vacuum Trucks
Experienced Drivers with Oilfield Backgrounds in: High Pressure Pumping Services (Stimulation and Cementing Services) Snubbing Well Testing
John L. Jalufka Started Oilfield Career in 1977 doing hydro-blasting, nipple-up /testing and tubing inspections Owned 3 Oilfield Service Companies J4 Oilfield Services C & J Specialty Rental Tools J4 Fluid Services Specialties include compact multi functional hydraulically driven equipment design and fabrication High Pressure Pump Trucks Coil Tubing Units Frac Blenders Nitrogen Pumping Equipment Fluid Blending Equipment Design of Specialty Equipment for Severe Service Jobs
Harold E. Bowen Currently holding the position of Director of Operations, J4 Oilfield Services, Pump Division
Henry C. Reeves, III BS Degree in Geology 1981, Arizona State University Held various Field, District and Regional Management positions with The Dow Chemical Company 1981-1985 Joined TETRA Technologies July 15,1985 as Manager of Product Development Registered Geoscientist in the State of Texas (License number 4304) Currently VP/Director J4 Fluid Services, Inc. (50% ownership position) Veteran of the United States Navy Nuclear Submarine Service (QM3 SSN)
Robert Tipton Currently holding the position of STX Engineering Manager for J4 Fluid Services, Inc.
Formerly held the position of STX Sales Engineer for TETRA Technologies, Inc. 2000-2008
Held various Field and District Positions with Halliburton Cementing Services, 1978-2000 John Bonneau Currently holding the position of Operations Manager for J4 Fluid Services, Inc. Formerly held the position of Operations Manager for Integrity Industries Held Field and District Level Positions with various Oilfield Service Companies since 1997
Specific polymer selection is largely dependent on fluid chemistry, circulating temperature and carrying capacity (YP) requirements
Circulating and Storage Fluid Volume Inventory Management and Daily Cost Accounting
Monitoring Fluid Loss/Gain LCM Fluid hydrostatic and or back pressure recommendations
Fluid Hydraulic Calculations Annular Velocity required to maximize hole cleaning capability Bottoms up time calculations for visual confirmation of high viscosity sweep effectiveness
Coiled Tubing and Snubbing Unit Fluid Pumping Support Services FET (Flow Efficiency Test) Local Data Acquisition Package In-house Frac design Capability High Pressure Differential Wellbore Fluid Displacements High Density Sand Plug Mixing and Pumping Pressure Testing Plugs Well Control Fluid Pumping
665 HP Series 60 Detroit Turbo Charged High Pressure Pumping Unit
J4 Super Blender
Twin 45 bbl SS Displacement Tanks Twin 2000 gpm C-Pumps All SS Piping
Applications include
High Density Sand Plugs (up to 20 ppg) Calcium Carbonate LCM (up to 400 ppb) Simultaneous Blending and Distribution of Heterogeneous Fluid Systems
Pressure Maintenance Testing Sandblasting Water Blasting Compressor Stations Drilling/Work Over Rigs Drilling Fluid Circulating Tanks
Steam Cleaner
Duel Diesel Driven 3K PSI Unit 500 Gallon Service Tank Capacity Soap and De-Greaser Multi Gun Capability
Friction Reducers Viscosifiers Fluid Loss Control Agents Post Job Packer Fluid Additives Corrosion Inhibitors Oxygen Scavengers Biocides Multi-Stage Displacement Spacers Foaming and De-Foaming Agents H2S Scavengers
J4 Pumping Services John Jalufka J4 Fluid Services Hank Reeves STX Engineering Bryan Tipton
(361) 877-4742
(361) 877-9062
(361) 571-4190
(361) 246-0787