Sei sulla pagina 1di 57

098000 0l0 $0##ll08 098000 0l0 $0##ll08 098000 0l0 $0##ll08 098000 0l0 $0##ll08

098000 0l0 $0##ll08 098000 0l0 $0##ll08 098000 0l0 $0##ll08 098000 0l0 $0##ll08
Make Ready Suppl i es t o Di e f or...
Se Habla Espaol
Our Mi ssion at Advanced Di e Suppl ies i s t o provi de solut i ons
and val ue f or our cust omers. and val ue f or our cust omers.
Advanced Die Suppli es i s proud to support t hese associ at i ons
Contact us vla e-mall at
|nfoQAdvancedDleSupplles.com
vlslt us onllne at
www.AdvancedDleSupplles.com www.AdvancedDleSupplles.com
Terms on approval of credlt. Terms on approval of credlt.
All ma[or credlt cards accepted All ma[or credlt cards accepted
3
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
The hlghest dleboard quallty, selectlon and standards ln the world. 8ar none.
-
Lvery LaserPL Dleboard exceeds lndustry standards set by the |ADD and the LSU/LDA and, most lmportantly, by the hardworklng lndlvldu-
-
tlon, we'll replace lt for you free of charge.
Por your convenlence, Plat LaserPL Dleboards come ln a vast array of panel slzes and thlcknessesmetrlc and lmperlalto satlsfy all
proprletary machlnery, laser dle cuttlng, corrugated, foldlng carton and strlpplng appllcatlon needs. whether you llke to buy large and nest
your dles or buy small for easy ln-house handllng and no cuttlng or nestlng, we dellver. |f you don't see lt llsted, [ust ask. we'll have the slze
you need custom-made for your appllcatlon.
OUP D|L8OAPD GPADLS:
PG wood |mports' dleboards have been added to our famlly of products
because they represent the hlghest quallty ln thelr category.
- Alex Glgon, Dlrector Servlce Operatlons, 8obst North Amerlca |nc.
- Zero defects, mlnlmal color streak on both sldes. Deslgned for the dlemaker who requlres the ultlmate quallty
assurance.
- Mlnlmal defects and color streak on both sldes. Thls ls the lndustry-standard grade and the best value.
- Mlnlmal defects and color streak on both sldes, Uv-coatlng on both sldes. Thls ls the lndustry-standard
LaserPL Platform
constructlon dleboards. Thln LaserPL Platforms are belng used ln rotary dleboard productlon and for other curved plywood components.
4
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Deslgn Tools
Mylar
Avallable ln matte (frosted) one-slde, matte two-sldes
& clear.
Standard Slzes:
0.003"- 0.0l0" thlck
24"- 60" wlde rolls
Poll lengths from 20 - l00 yds
Other dlmenslons and sheeted slzes avallable on request.
Sample Maker's Score Cuttlng Tool
Ad[ustable tool comes wlth l3 shlms to provlde the wldest range of wldths
for sample scorlng. To use, add .004" to twlce the thlckness of the sample
commence scorlng.
Plsher Space Pens
Plotter & Sample Maker Pens
Advanced Dle Supplles ls the excluslve dlstrlbutor of Plsher
Space Pens for the Convertlng |ndustry. Gas-pressurlzed
pens for plottlng. Compatlble wlth Alphamerlc, Llcede,
Datatech, Kongsberg, Mlsomex, ZUND and vlrtually all
other tables.
Avallable:
3"and 3.5"
Plne, medlum & bold
8lack, blue, llght blue, red, green, brown, orange, sllver
& gold
Soft Grlp Knlfe
Dlemaker's and Deslgner's knlfe for exact cuttlng. Perfect for
grlp for extra comfort and control. Pack of replacement
No. ll blades avallable (QT l00).
Ad[ustable Sample Maker's Creaslng
Pule Holder
|nsert the determlned polnt rule and lock lt ln place.
Use ln con[unctlon wlth the Sample Maker's Tool.
Avallable: l2", l8", 24", 36" & 48" lengths
5
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Dlecuttlng
Mltltuyo Mlcrometer
Dlgltal mlcrometer for measurlng materlals such as paper,
cardboard, metal, plastlc and leather. Peads ln both lnches
and mllllmeters.
Starrett Dlal Sheet Gage
Measures sheet materlals such as paper, cardboard,
leather, plastlc and metal. Gage can be easlly zeroed.
Peads a range from 0 - .l50" wlth a throat depth of
l-l/8".
Also avallable wlth metrlc graduatlons.
Starrett Paper Gage Mlcrometer Callper
slmllar materlal. Pange of ll/32" a graduated ln l/l000".
Lxtra large 7/l6" dlameter prevents compresslon of the materlal and
lnaccurate measurements.
Starrett 2l6 Serles Mlcrometer
Starret dlgltal mlcrometer makes readlngs faster and easler. Thousandths of an lnch
can be read dlrectly from the dlgltal counter and ten-thousandths of an lnch are shown
on a qulck-readlng vernler scale on the sleeve.
To Select Matrlx Slze
To Calculate the Correct Channel wldth
To Calculate the Correct Channel Depth
6
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
SNTP|X
SNTP|X Matrlx, from 8obst, ls the most
technologles and synthetlc, DUPA8LL materlals,
SNTP|X ls the loglcal result of 40 years constant
development. SNTP|X ls the solutlon for long runs.
P|8P|X
P|8P|X Matrlx, from 8obst, ls the ultlmate
advanced matrlx system. Comblnlng pressboard wlth
recycled board. Also a solutlon for label-lamlnated
corrugated creaslng.
MLTP|X
The Orlglnal steel-based matrlx
MLTP|X Matrlx self-locatlng creaslng matrlx from
used creaslng matrlx. |t ls extremely durable arld
rlval systems.
lnformatlon or for help calculatlng other callpers
Peverse 8end Matrlx
Thls self-locatlng creaslng matrlx can
be used where creaslng on both sldes
of the board ls requlred, or where a
creaslng bead lnslde the crease ls not
deslrable. The two creaslng rules are
lnserted lnto the dle to form the chan-
nel, and the rldge on the matrlx acts
as a creaslng rule.
U 8end
Por creaslng corrugated and solld
board through l80. Thls unlque
format reduces the stress that can
occur wlth Multlcrease matrlx.
T|P: Try U 8end on roll-over scores
where cracklng may occur.
U 8end Slzes
Peverse 8end Slzes
The world's most advanced creaslng make-ready system.
Three lnnovatlve formats to best sult every [ob's unlque needs.
Channel
Depth (d)
ln mm
Channel
wldth (w)
ln mm
Pule to Pule
Dlstance (r)
ln mm
Common
Slzes
8oard
Thlckness
Pule to Pule
Dlstance
(channel wldth)
0.6
0.7
0.8
l.0
0.6
0.7
0.8
l.0
P8l Ped
P82 ellow
P84 Green
P85 8lue
P86 vlolet
.0l0"-.020"
.020"-.030"
.030"-.040"
.040"-.050"
.050"-.060"
.060"-.070"
.080"
.ll0"
.l60"
.l80"
.200"
.240"
5
5
5
5
8.0
8.0
8.0
8.0
3
3
3
3
5
5
5
5
7
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
8oard Thlckness
(lnches)
Crease Pule
wldth
Crease Pule
Helght
Matrlx Slze
(mm)
.006"
.008"
.0l0"
.0l2"
.0l4"
.0l6"
.0l8"
.020"
.022"
.022"
.024"
.024"
.026"
.028"
.030"
.030"
.032"
.032"
.035"
.039"
.043"
.047"
.047"
.05l"
.055"
2pt
2pt
2pt
2pt
2pt
2pt
2pt
2pt
3pt
2pt
3pt
3pt
3pt
3pt
4pt
3pt
4pt
4pt
4pt
4pt
4pt
6pt
6pt
6pt
or
or
or
or
or
or
or
or
or
or
or
or
or
or
or
or
or
or
or
or
or
or
.930" or .932"
.928" or .930"
.926" or .928"
.924" or .926"
.922" or .924"
.920" or .922"
.9l8" or .920"
.9l6" or .9l8"
.9l4" or .9l6"
.9l4" or .9l6"
.9l2" or .9l4"
.9l2" or .9l4"
.9l0" or .9l2"
.908" or .9l0"
.906" or .908"
.906" or .908"
.904" or .906"
.904" or .906"
.900" or .902"
.896" or .898"
.892" or .894"
.888" or .890"
.888" or .890"
.884" or .886"
.880" or .882"
0.3 x 0.8
0.3 x l.0
0.4 x l.l
0.4 x l.l
0.4 x l.2
0.4 x l.3
0.5 x l.4
0.5 x l.4
0.6 x l.5
0.6 x l.7
0.6 x l.7
0.6 x l.9
0.7 x 2.l
0.7 x 2.l
0.8 x 2.3
0.8 x 2.5
0.8 x 2.5
0.8 x 2.7
l.0 x 3.0
l.0 x 3.0
l.2 x 3.2
l.2 x 3.5
l.2 x 4.0
l.4 x 4.0
l.4 x 4.0
0.4 x l.2
0.4 x l.3
0.4 x l.4
0.5 x l.5
0.5 x l.5
0.6 x l.7
0.6 x l.9
0.6 x l.9
0.6 x 2.l
0.7 x 2.3
0.7 x 2.3
0.8 x 2.5
0.8 x 2.7
0.8 x 2.7
0.8 x 3.0
l.0 x 3.2
l.0 x 3.2
l.2 x 3.5
l.2 x 4.0
l.2 x 5.0
l.4 x 5.0
l.4 x 5.0
SNTP|X P|8P|X
Matrlx & Crease Pule Selector Gulde
Please note these slzes are suggestlons only. varlatlons ln board quallty and envlronment may make alteratlons necessary.
8ased on .937 cuttlng rule
8
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.6
0.8
l.0
l.l
l.2
l.3
l.4
l.5
l.6
l.7
l.9
0.6
0.8
l.0
l.l
l.2
l.3
l.4
l.5
l.6
l.7
l.9
0.8
l.0
l.l
l.2
l.3
l.4
l.5
l.6
l.7
l.9
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
Channel
Depth
Channel
wldth
Peet
/8ox
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.8
l.0
l.l
l.2
l.3
l.4
l.5
l.6
l.7
l.9
2.l
2.3
0.8
l.0
l.2
l.3
l.4
l.5
l.6
l.7
l.9
2.l
2.3
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
Channel
Depth
Channel
wldth

0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
l.0
l.l
l.2
l.3
l.4
l.5
l.6
l.7
l.9
2.l
2.3
2.5
2.7
3.0
3.2
3.5
4.0
5.0
6.0
7.0
8.0
l.3
l.4
l.5
l.6
l.7
l.9
2.l
2.3
2.5
2.7
3.0
3.2
3.5
4.0
4.5
5.0
6.0
7.0
8.0
l.3
l.4
l.5
l.6
l.7
l.9
2.l
2.3
2.5
2.7
3.0
3.2
3.5
4.0
4.5
5.0
6.0
8.0
79
79
79
79
79
79
79
79
79
79
79
79
79
79
59
59
49
49
49
49
49
79
79
79
79
79
79
79
79
79
79
79
59
59
49
49
49
49
49
49
79
79
79
79
79
79
79
79
79
79
79
59
59
49
49
49
49
49
Channel
Depth
Channel
wldth
Peet
/8ox
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
l.0
l.0
l.0
l.0
l.0
l.0
l.0
l.0
l.0
l.0
l.0
l.2
l.2
l.2
l.2
l.2
l.2
l.2
l.2
l.2
l.4
l.4
l.4
l.4
l.4
l.4
l.4
l.4
l.4
l.6
l.6
l.6
l.6
l.6
l.6
l.6
l.6
l.6
l.5
l.6
l.7
l.9
2.l
2.3
2.5
2.7
3.0
3.2
3.5
4.0
4.5
5.0
6.0
8.0
2.3
2.5
2.7
3.0
3.2
3.5
4.0
4.5
5.0
6.0
8.0
3.0
3.2
3.5
4.0
4.5
5.0
6.0
7.0
8.0
3.0
3.2
3.5
4.0
4.5
5.0
6.0
7.0
8.0
3.0
3.2
3.5
4.0
4.5
5.0
6.0
7.0
8.0
79
79
79
79
79
79
79
79
79
59
59
49
49
49
49
49
79
79
79
79
59
59
49
49
49
49
49
59
59
59
49
49
49
49
49
49
59
59
59
49
49
49
49
49
49
59
59
59
49
49
49
49
49
49
Channel
Depth
Channel
wldth
Peet
/8ox
SNTP|X Matrlx Slzes
latest
technologles and synthetlc, DUPA8LL materlals, SNTP|X ls the loglcal result of 40
years constant development. SNTP|X ls the solutlon for long runs.
Avallable:
Standard, OC, MC, |C and P8
Strlps or Colls
9
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
l.0
l.l
l.2
l.3
l.4
l.5
l.6
l.7
0.8
l.0
l.l
l.2
l.3
l.4
l.5
l.6
l.7
l.9
l.0
l.l
l.2
l.3
l.4
l.5
l.6
l.7
l.9
2.l
2.3
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
Channel
Depth
Channel
wldth
Peet
/8ox
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
l.2
l.3
l.4
l.5
l.6
l.7
l.9
2.l
2.3
2.5
2.7
3.0
3.2
3.5
4.0
5.0
6.0
l.3
l.4
l.5
l.6
l.7
l.9
2.l
2.3
2.5
2.7
3.0
3.2
3.5
4.0
5.0
6.0
59
59
59
59
59
59
59
59
59
59
59
59
59
59
49
49
49
59
59
59
59
59
59
59
59
59
59
59
59
59
49
49
49
Channel
Depth
Channel
wldth
Peet
/8ox
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
l.0
l.0
l.0
l.0
l.0
l.0
l.0
l.0
l.0
l.5
l.6
l.7
l.9
2.l
2.3
2.5
2.7
3.0
3.2
3.5
4.0
5.0
6.0
2.3
2.5
2.7
3.0
3.2
3.5
4.0
5.0
6.0
59
59
59
59
59
59
59
59
59
59
59
49
49
49
59
59
59
59
59
59
49
49
49
Channel
Depth
Channel
wldth
Peet
/8ox
l.2
l.2
l.2
l.2
l.2
l.2
l.4
l.4
l.4
l.4
l.4
l.4
l.6
l.6
l.6
l.6
l.6
l.6
3.0
3.2
3.5
4.0
5.0
6.0
3.0
3.2
3.5
4.0
5.0
6.0
3.0
3.2
3.5
4.0
5.0
6.0
59
59
59
49
49
49
59
59
59
49
49
49
59
59
59
49
49
49
Channel
Depth
Channel
wldth
Peet
/8ox
P|8P|X Matrlx Slzes
P|8P|X Matrlx, from 8obst, ls the ultlmate advanced matrlx system. Comblnlng
matrlces.
Avallable:
Standard, OC, MC, and |C
Strlps or Colls
l0
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Metrlx Matrlx Slzes
wldely used creaslng matrlx. |t ls extremely durable and accurate and provldes
8lack
8rown
Grey
Orange
ellow
Green
whlte
Ped
whlte
ellow
whlte
ellow
Green
Ped
8lue
50 whlte
50 whlte
50 whlte
50 whlte
60 ellow
60 ellow
60 ellow
50 ellow
0.55
0.7
0.8
0.9
l.3
l.6
2.0
2.0
0.38
0.43
0.48
0.38
0.43
0.48
0.58
0.68
0.79
0.38
0.38
0.38
0.38
0.43
0.43
0.43
0.43
0.48
0.48
0.48
0.48
l.3
l.5
l.9
2.3
3.0
3.8
3.8
5.0
l.0
l.3
l.5
l.0
l.30
l.50
l.90
2.30
2.70
l.0
l.0
l.0
l.0
l.3
l.3
l.3
l.3
l.5
l.5
l.5
l.5
2/3
2/3
2/3
2/3
4/6
4/6
4/6
4/6
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
0l0-0l6"
0l6-020"
024-028"
032-036"
036-048"
040-050"
048-060"
058-072"
006-0l0"
0l0-0l6"
0l6-020"
006-0l0"
0l0-0l6"
0l6-020"
024-028"
032-036"
036-040"
9/64"
l/8"
5/32"
3/l6"
l/8"
9/64"
5/32"
3/l6"
l/8"
9/64"
5/32"
3/l6"
79
79
79
79
39.5
39.5
39.5
39.5
59
59
59
79
79
79
79
79
79
(3.5mm)
(3mm)
(3mm)
(4mm)
(3mm)
(3.5mm)
(3.5mm)
(3.5mm)
(3mm)
(3.5mm)
(3mm)
(5mm)
Color
Channel
Slze
Channel
Depth
(d)
Channel
Depth
Channel
wldth
(w)
Channel
wldth
Locator
polnt
slze
Use on
board
thlckness
Center
to Center
Peet
per
8ox
III
Lxtra Deep
Super
Multl-Crease
22 Gold
32 Orange
50 Cloud
50 whlte
60 Llme
60 ellow
67 vlolet
67 Mauve
75 Ollve
75 Green
83 Plnk
83 Maroon
90 Ped
l05 8lue
l20 8rown
l20 8rown
l50 Grey
l50 Grey
200 8lack
200 8lack
250 Cream
250 Cream
0.38
0.38
0.38
0.38
0.43
0.43
0.48
0.48
0.53
0.53
0.58
0.58
0.63
0.68
0.79
l.0
l.0
l.3
l.3
l.6
l.6
2.0
2.0
0.56
0.8
l.0
l.3
l.3
l.5
l.5
l.7
l.7
l.9
l.9
2.l
2.l
2.3
2.7
3.0
3.0
3.8
3.8
5.0
5.0
6.3
6.3
l/l.5
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
3/4
4/6
3/4
4/6
3/4
4/6
3/4
4/6
Paper
004-006"
006-0l0"
006-0l6"
0l0-0l6"
0l0-0l6"
0l6-020"
0l6-020"
020-024"
020-024"
024-028"
024-028"
028-032"
032-036"
036-040"
040-048"
040-048"
048-056"
048-056"
056-064"
056-064"
064-072"
064-072"
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
39.5
39.5
39.5
39.5
39.5
39.5
39.5
39.5
Color Channel
Depth
(d)
Channel
wldth
(w)
Locator
polnt
slze
Use on
board
thlckness
Peet
per
8ox
Standard
ll
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Makeready Accessorles
Matrlx Mlterlng Pllers
Cuts 45 mltered angle. Plts all matrlx base
wldths.
Ad[ustable slde gauge and spare blade lncluded.
Avallable ln a durable metal or an economlcal
plastlc.
Speclfy metal pllers or plastlc pllers.
Peplacement blades and anvlls avallable.
Tympan Paper Spot Sheets
Multlple appllcatlons ln prlntlng and dlecuttlng
makeready processes for letterpress, llthography,
repel molsture and most plate or blanket washes. Thls
hlgh denslty paper ls .006" thlck.
Avallable ln rolls: 36", 45" and 54" wlde
Pre-cut top sheets and speclalty slzes can be supplled
Carbon Poll & Carbon Sheets
8lack, one-tlme use carbon paper.
Avallable ln rolls .00l5" x 44" x l000'
or sheets 26" x 39" (l00 sh/pkg)
Matrlx Plle
|f needed, use to smooth mltered ends or edges.
8etter than sandpaper.
Trlpplex Spot Sheets
The hlgh-tenslle strength of the patented polypropyl-
ene foll center makes thls a superlor spot sheet. Trlp-
plex ls especlally good for long runs and repeat uses.
Speclal polypropylene foll center
Long llfe for repeat runs
Tear reslstant
water proof
Avallable:
47 x l64' rolls
.005"Thlck
Super Cut 8ench Press
Advanced shearlng actlon mlters both ends wlth one cut
waste collects beneath shears for added convenlence
Length gauge for repetltlve cuttlng
Slmple & economlcal blade replacement
l2
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Makeready Accessorles
1ute Tag
Manlla-colored, medlum-hard board ldeally sulted for short runs.
Avallable:
|n 24" x 36" sheets
.008" - .036" thlck
Speclfy plaln, adheslve or kraft-backed
Genulne Pressboard
Pearl gray, hard surfaced board ls ldeally sulted for medlum runs.
Avallable:
|n 24"x 36" sheets,
.0l0" - .036" thlck.
Speclfy plaln, adheslve or kraft-backed
vulcanlzed Plberboard
Ped, extra through-hardened board ls ldeal for long runs or for recycled
substrates.
Avallable:
|n 24" x 36" sheets,
.0l0"- .040" thlck
Stereo Lmbosslng 8oard
whlte Stereo Lmbosslng board ls the economlcal alternatlve to
two-plate embosslng and debosslng. Lllmlnate one-half of a stan-
dard brass, steel or composlte plate set and make your own coun-
ter. Lasler and safer than "Pour a Counter" wlth superlor results.


Avallable:
|n a varlety of sheets from l9" x l9" to 20" x 60" dependlng on thlckness.
Avallable thlcknesses: .030" - .066"
Steel Shlm Tape
Pressure sensltlve adheslve makeready tape used to level a plate
or press. Also used behlnd the dle. All rolls are 5/l6" wlde.
Avallable:
.00l", .002" and .005" thlck,
Polls 33', 66', 99' and l97' long
Thls plastlclzed, pressure sensltlve adheslve, makeready tape exhlblts great tear and
molsture reslstance. |ts hlgh-tenslle strength makes lt well-sulted for long runs and on
repeat-use spot sheets.
Saves tlme ln appllcatlon
Lasler to apply
Less waste
Does not wrlnkle
Prevents cuttlng plate rust
Avallable: l/4" wlde
Thlcknesses: .003" yellow, .002" red, .00l" blue
Spot Tape
Conventlonal Makeready Tape
lndustry.
Avallable ln:
l/4 " and l/2" wlde rolls
.00l5", .003" and .006" thlck
Pressboard
l3
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Makeready Accessorles
Counterplate Locator Pln & washer
Deslgned to locate and transfer phenollc counterplates wlth preclse
reglstratlon. Durable plastlc, alumlnum plns and washers are re-usable.
OSHA-frlendly cleaner removes matrlx,
counterplate and varlous adheslves
qulckly and easlly. Lxtremely low
(0-2-0) ensures
compllance wlth strlct health and
safety standards.
-
(Health-Plammablllty-Peactlvlty)
l02 & 8AAQMD Pegulatlon 8
Clean-Up
Solvent Plate
Cleaner
Phenollc Countamat Materlal
A substltute for hand-cut counterboard, Matrlx and costly steel coun-
terplates. Achleve close tolerance and the durablllty for extremely
long runs wlth 8obst Countamat counters.
Peatures:
Lxtended lmpresslon llfe
Llghter than steel
Accurate machlnablllty
Less down tlme at changeover
Laslly removed and reused
Avallablllty:
Plgld Materlal
0.0l5" - 0.048" thlck
Standard sheets are 42-l/8" x 4l-5/l6"
much safer than chlorlnated
solvents, toluene, xylene, etc."
` See Pg. 26 for our new
Oll Plo l4l, oll removlng
solutlon.
Pecommended by:
(0-2-0)
l4
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Makeready Accessorles
Hlgh Speed Lockup Quolns
Qulckly lock up dles ln the press or chase. 8ar-Plate's
unlque constructlon applles even pressure across the
Avallable: 3", 6", 9" and l2"
Speclal 8obst' Quolns are avallable ln 9"
Standard "T" handle key and 6" rlght angle key, as
well as the newest Torque Quoln Key, are avallable
separately.
L-Z Peacher
Developed wlth safety ln mlnd. Safely reach lnto the press to clean out wasted or
mlsfed sheets. Lqulpped wlth replaceable suctlon cups, the L-Z Peach can grab
vlrtually any surface.
Avallable: 32", 48", 60" and 72" lengths
Plng Knlves
Avallable slzes: 5, 6, 7, 8 9, l0, ll and l2
Ad[usto Stop Gulde
2" x 2" ad[ustable dlecuttlng gulde ls rugged and easy to use.
Adhere wlth double-slded tape. Accommodates materlal up to
l/2" thlck wlth accurate reglstratlon to .00l". Allows for
ad[ustment wlthln l" range.
Peglstratlon ls easlly accompllshed by loosenlng and
tlghtenlng the allen screws. The vernler scale on both
sldes of the gulde make preclse ad[ustment easy. Low
helght of only .l80" makes recesslng the dleboard un-
necessary.
Avallable: 2" x 2" and l" x 2"
Adhere to cuttlng surface wlth double faced tape.
Sklveready Knlfe
Por sklvlng/chamferlng the counterboard makeready.
Center bevel blade allows use from both sldes and wlth
elther hand. Pesults ln clean, beveled edge to ellmlnate
sheet-catchlng. Addltlonal blades avallable ln 5-packs.
l5
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Dlecuttlng Plates
Cuttlng Plates, 8ack Up Plates & 1ackets
1ackets for Mlehle, Mlller, L&M, vlklng, Heldelberg and other
regular and converted presses. Hlgh carbon steel ln excess of 35
PC hardness. All [ackets manufactured to your
Most common thlckness ls .083".
Plates for 8rausse, C&P, Champlaln, Condes,
Consolldated, Crosland, Heldelberg, |mperla,
Kempsmlth, Kluge, Mercury, Preco, S&S, Schwabe,
Standard, Thomson, wupa and Zerand also stocked.
Standard hardness ls 47-52 HPC.
Plates avallable ln all slzes for all presses ln
thlcknesses from l/l6" to l/2".
Speclal plates requlre a dellvery tlme of 5-7 weeks.
8obst' Cuttlng Plates
Peplacement plates for 8obst' presses and other hlgh speed platen presses.
Hlgh carbon steel ls hardened, tempered, ground and pollshed to produce a superlor quallty plate. |mmedlate
shlpment of stock plates for SP 76-L, SP l02-L/SL, SP l02 Lvollne, SP l02-L ||/Lvollne +, SP l02-CL/CL ||, SP l02-
CLP/CLP ||, SP l03-L/LP, SP l04-L/LP, Sperla l06 L & Commerclal l06 L, SPanthera l06 LL/LLP, SPrlntera l06
PLP, SP l30-L/L ||/SL, SP l30-LP/LP ||/SLP, SP l42-L/LP & SPerla l42 L, SP l42-CLP/CLP ||, SPanthera l45 PLP &
SPrlntera l45 PLP, SP l62-CL, SP l62-CLP, SPO l575, SPO l60 S & v|S|ON, SPO l600/ A & APP, SPO 2000 & 203
A, MASTLPCUT l.7, MASTLPCUT 2.l.
Chase Plates
New and used 8obst' Chases avallable.
Thln Plates
Por [ob to [ob makeready.
lmm thlck for most hlghspeed presses.
`Por complete hardness, slze and, part number llst please vlslt our webslte,
www.AdvancedDleSupplles.com
`Now ln stock ln CA. Please
call to check whlch slzes are
ln stock.
l6
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Dlemaklng Accessorles
Pawhlde Mallets
Tradltlonal dle maker's mallet.
Slzes: #3 l-3/4", #4 2", #5 2-3/4"
Dlemaker's Mallet & Peplacement Heads
Heavy duty elastomer mallets are made to wear evenly and wlll
not break or spllnter. Tough, long-lastlng heads are replaceable.
Slzes. #4 2" x 3.5", #4L 2" x 5", #6 2 3/4" x 4 3/4"
Dlemaker's Apron
Pugged denlm materlal wlth durable stltchlng provlde the
dlemaker wlth protectlon and convenlence. Comes wlth two
Utlllty pockets and tle strlngs attached.
Kevlar' Safety Gloves
measure around the wldest part of the palm.
Avallable Slzes:
S (7 - 8") M (8-l/2 - 9") L (9-l/2 - l0") XL (l0-l/2 - ll"
Corrugated Pasteners
Used to [oln multlple dle boards to form larger steel
rule dles.
Avallable: 3/8" x l", l/2" x l", and 5/8" x l"
very Ped Durable Dle Makers Mallet
Durable Polyurethane mallets.
_______________________________
Slzes: S - l-3/4", M - 2" x 5", L - 2-3/4" x 4-3/4"
l7
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Dlemaklng Accessorles
Laborsaber 1lg Saw
Thls [lg saw has deslgn lnnovatlons that greatly lncrease sawlng speed, yet retaln the
accuracles you need and expect.
Avallable throat slzes: 36", 48", 52", 60", 62" and 70". Optlons lnclude: [lg head at 90
for larger dleboards, magnlfylng glass, table extenslon
1lg Saw 8lades
8lades for Laborsaber, Cutawl, Plchards and more.
l-, 2, 3, 4, 6 and 8 polnt
Cutawl slzes #42, #43, #44
Petractable style
1lg blade glldes for l-l/2, 2, 3, 4, 6 and 8 polnt
Cutawl Saw
Leadlng saw for rotary dles. Made especlally for the dense,
hard maple and blrch dleboards. Cutawl accurately saws
boards.
Avallable:
K-l2C-50 for 50" rotary dleboard
K- l2C-66 for 66" rotary dleboard
Cutawl 8lades
Cutawl slzes #42, #43, #44 for 2, 3 and 4 polnt
wood Chlsel
Drop forged, preclslon ground blade.
Hlgh lmpact plastlc handle.
Avallable: ", ", "
Hlghest Quallty Dleboard
Plat board lncludes Maple, Pusslan 8lrch, Multl-Core 8lrch/Maple,
Uv coated 8lrch - for Dleboards, Strlpplng [lgs and 8lankers.
other routers: Pusslan 8lrch, Maple
Potary board lncludes: l00% Hard Maple
Thlcknesses: l/2" and 5/8"
Dlameters: 7-l/2" to l9-3/l6"
`See pg. 3 for PG wood
lnformatlon
l8
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Dlemaklng Accessorles
Pocket Scrlbe
#8l: 3/8" dlameter wlth 5-7/8"length
#83: l/4" dlameter wlth 4-3/4"length
Peplacement tlps avallable
Mlnl Perf-a-Type
Deslgned for lltho-lamlnated and hlgh-graphlc corrugated. 3/8" hlgh for the most
Perf-a-Type
or rotary dleboards. Attach wlth adheslve, nalls or convenlent perf-a-type tracks.
3/8" hlgh letters and numbers
on l/2" adheslve-backed base.
Attach wlth adheslve, nalls or
convenlent mlnl tracks.
Pule Setter
Any hammer can be used ln con[unctlon wlth the Setter because only the Pule
Setter comes ln contact wlth the rule. Paster than tradltlonal mallet rule lnsertlon.
Made from polyurethane that wlll not chlp.
Pule Tweaker
Use thls tool when the knlfe needs to be moved [ust a smldgen
more, or when the mlter needs [ust a touch to make lt perfect, or
when the crease needs [ust a tap to stralghten lt.
|nterchangeable heads avallable ln 2, 3 and 4 polnt
l/2", l", 3-l/2" and 6" lengths
Pule Tamper
Hand held, dead blow tool for preclse rule lnsertlon. Perfect for fabrlcatlng
head on the opposlte end.
Perf-a-Type Track
Por easlest placement of all perf-a-type, use these hardy plastlc holders.
Avallable for regular and mlnl perf.
8lue Mlnl Perf A Gulde, .029" or .74mm Thlck.
Medlum 8lue Mlnl Perf A Gulde, .094" or 2.40mm Thlck.
Ped Mlnl Perf A Gulde, Potary .l90" or 4.75mm Thlck.
8lue Perf A Gulde 5/8", Plat.
Ped Perf A Gulde l/2", Potary.
`wlth our thlcker bases
shlmmlng ls reduced or
even ellmlnated.
l9
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Nlcklng Tools
Qulcknlck Grlnder
Lnsure accurate, conslstent, perpendlcular nlcks wlth thls dlemaklng tool. The deslgn of
the Qulcknlck Grlnder guarantees that nlcks wlll be properly placed and prevent
premature break up of the sheet. Ad[ustable depth stop, easy-to-read scale on base
and Lexan safety guard make thls grlnder a professlonal tool.
Grlndlng wheels
Avallable thlcknesses: 0.0l0" - 0.062"
Dlameters: l"- 3", wlth lnslde dlameters l/8", 9/32", l/4"
Dremel Moto-Tool
Lasy-to-use, economy nlcklng grlnder comes wlth a l/8" mandrel and collet, but also
accommodates l/l6", 3/32" and l/8" collets.
Dremel wheels
Common slzes #409, #420
Other slzes avallable.
Nlcklng Chlsel Set
a knurled holder and three standard tlps: .020", .030" and .040".
8etter than screwdrlvers, tlles or other pleces of knlfe.
Pule Sharpener
Sharpenlng the rule ls only recommended when cuttlng lnto a soft cuttlng
MlcroNlk
20
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Dlemaklng Solutlons
Korl Clamp
Lconomy rear clamps for female strlpplng [lg. More cost
ralls on exlstlng and new strlpplng boards. So economlcal
there ls no need to remove and re-use these clamps.
Por use ln strlpplng and blanklng boards.
All plns have knurled bases for the greatest hold ln the board
Smaller dlameter plns are steel for durablllty
Larger dlameter plns are llght welght, economlcal alumlnum
Manufactured ln the USA excluslvely for Advanced Dle Supplles
Avallable:
Polnted: l/8", 3/l6", l/4"
Plat: l/8", 3/l6", l/4", 5/l6", 3/8"
Speed8ar
Pevolutlonary new presser bar deslgned to make manufacturlng and
operatlng male blankers less complex and less tlme consumlng.
Press ready - no assembly requlred
No helght ad[ustments
1am free
Tested up to l6,000 SPH
Lasy lnstallatlon - only requlres a drlll
Compatlble to 8obst Qulck Lock
Less costly than alternatlve models
Avallable: 9', l3"and l6"
Plat Top and Crown Strlpplng Plns
Por use ln strlpplng and blanklng boards.
Avallable:
Plat: 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, l0mm
Crown: 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, l0mm
all a 4mm base.
ellow 1oggers
Por blanker dles. Pellable, llght welght, economlc, dependable.
2l
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Dlemaklng Solutlons
Dlstance Spacers
Por proper spaclng of the male strlpplng board.
|nner barrel helghts avallable: 7/8" and l"
Dle Storage 8olts
8lack or Orange Storage 8olt for qulck locatlon of strlp-
plng tools.
Avallable: 2" and l-5/8" hlgh.
Centerlng 8racket
Compatlble wlth 8obst' l03 and l04 systems for fast lock frames.
Centerllne Stops
Centerlng stop used on Centerllne l and Centerllne 2 systems,
the 8lack center llne stop used on the upper (male) strlpplng [lg
and the Ped center llne stop for the lower (female) strlpplng [lgs.
Pronged and Pegular T-Nut
Por mountlng 8obst cuttlng dles and portlons of the strlpplng [lg.
Avallable ln any slze.
Common slzes: 8/32, l0/24, l0/32, l/4, 5/l6 and metrlc slzes 4mm,
5mm, 8mm.
Quantltles of l00 & 500 per box.
Non-Threaded T-Nuts
6.75mm
Por corrugated 8obst dles and strlpplng [lgs
Alumlnum Score
Tacker.
Other slzes and styles avallable wlth mlnlmum order
Tle Pods
Use Tle Pods/Tle 8olts to Clamp the wooden board to the pull
out frame on 8obst Dlecutters
Strlpplng Plates
3pt thlck, 50mm hlgh Strlpplng Plates for strlpplng boards. Polnted tlps so
e[ected scrap does not sllp.
_________________________________________________
Thlcknesses avallable: 5mm x 24mm, 7mm x 26mm, 9mm x 28mm,
llmm x 30mm, l5mm x 36mm, 20mm x 39mm and, 25mm x 44mm.
22
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
8S| 8lanklng Solutlons
Pressers
CL-l tower pressers, CL-2 Pressers, CL-l00 Pressers, SP-593 Pressers and, Plush
pressers avallable.
_________________________________________________________________
Palls
Presser ralls, 8endable presser ralls and, presser llnk cllps avallable.
________________________________________________________
1oggers
1oggers for grld tools, front and rear, wlth hat, long slldes. Slde [oggers.
Unlversal 1oggers
____________________________________________________________
8S| Plat Top Tool Klts
Por, Sp-l02-CLP, SP-l03-LP, SP-
l04-LP, SP-l06-PLP/LLP, SP-l30-LP,
SP-l42-CLP, SP-l42-LP, SP-l45-PLP,
SP-l62-CLP.
8S| Prame Klt
Por, Sp-l02-CLP, SP-l03-LP, SP-
l04-LP, SP-l30-LP, SP-l42-CLP,
SP-l600-LP, SP-l62-CLP, SPrlntera
l45-PLP
8S| Unlversal Tool klt
Por, Sp-l02-CLP, SP-l03-LP, SP-l04-
LP, SP-l06-PLP / LLP, SP-l30-LP,
SP-l42-CLP, SP-l42-LP, SP-l45-PLP,
SP-l62-CLP
23
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
8S| 8lanklng Solutlons
Adheslve Punners
( 5.0 x 3.0 x 2700mm)
( 6.0 x 3.0 x 2700mm)
( 8.0 x 3.0 x 2700mm)
____________________
Support Pall - Plat Top Tools
Por, l02,l03,l04-LP, l30-LP, l42-CLP, l42-LP, l62-CLP, Sprlntera l06-PLP, Sprlntera
l45-PLP
______________________________________________________________________
`Por all other 8S| parts lnqulrles please feel free to call
one of our Customer Servlce personel or reglonal sales
representatlves.
1OGGLP-UN|vLPSAL -7/l6" DPOP
GU|DL
SUPPOPT PA|L - PLAT TOP
TOOL l30-LP
SUPPOPT PA|L LND
SPLC|AL LOw HLAD
SHCS M5X20mm
PLAT SHCS
M3X25mm
1OGGLP-
UN|vLPSAL
S|DL
QU|CK LOCK K|T
SPLC|AL LOw HLAD SHCS
M5X24mm
ACCLSSOP NUT
3.5 x 28mm HAPDLNLD P|N
P|N |NSLPT|ON GU|DL TOOL - POP SUPPOPT
PA|LS
8S| PPAML K|T -
SP-l30- LP
1OGGLP - NAPPOw MOUNT|NG
PA|L - S|DL
PAPALLLL CLAMP
STANDAPD-SHCS
M5X20mm
1OGGLP-UN|vLPSAL-
PPONT/PLAP
MOUNT|NG
PA|L - NAPPOw
-l30 (877mm)
S
T
A
N
D
A
P
D
- S
H
C
S

M
5
X
l
6
m
m
24
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Qulck Chases created a one of a klnd
chase that requlres no furnlture, no
quolns and that can cut make-ready
tlmes ln half.
Pressure bars are easlly ad[usted by
loosenlng two screws located at the
top and bottom of the bars. Sllde the
bar to the proper locatlon and tlghten
the chase for ad[ustments.
Lasy to read scales are recessed lnto the
alumlnum chase, so your press opera-
tor can ad[ust for hlgh tolerances.
The pressure bars are deslgned to
secure any steel rule that ls easlly
notched for fast change out. To change
rules, [ust loosen the bolts along the
pressure bar and lnsert your cholce of
steel rule and tlghten bolts.
` Locks securely lnto your press
` Lllmlnates many cuttlng, scorlng
and perf dles
` vertlcal or horlzontal
` Double scores or splnes
` Qulck return on lnvestment
` Peduced make ready tlmes
` No need for furnlture or quolns
25
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Dlemaklng Solutlons
MlcroNlk
Use anywhere nlcks are necessary especlally at the lead edge and for greater sheet
nlcks creates a cumulatlve hold far greater than that of standard handnlcked sec-
tlons.
|mproves productlvlty ln tool-maklng and on press.
2 polnt .9l8" and .937"
4 to 8 nlcks per lnch
nlcks are 0.007" wlde and 0.030"deep
42 bevel wlth chamfered base
MlcroTrak
Thls revolutlonary Corrugated Creaslng Ald works wlth a corrugated
break up the surface of the creaslng face to slmultaneously create
creaslng pressure and rellef.
Peduces the pressure necessary to crease
|mproves sheet stablllty and dlmenslonal accuracy.
Avallable:
2, 3 and 4 polnt
Curved and stralght standard |engths
Other slzes car be speclal ordered
MlcroPerf
|deally sulted for perforatlng forms, contlnuous letterheads, checks, labels, cou-
pons and other slngle parts on thln stock products.
Avallable ln: 2 polnt .750", .9l8" and .937" hlgh.
Tooth patterns avallable: 30, 40, 50, 60 and 70 TP| (teeth per lnch)
MlcroMax
MlcroMax's 2 polnt perf rule has a 0.020" deep square teeth wlth a 2l bevel to
mlnlmlze materlal dlsplacement. |deal for perforatlng multl-part forms, card
stock, packaglng materlals and other heavy welght stock.
Avallable ln 2 polnt .9l8", .937" and .938" hlgh
Tooth patterns avallable: 30, 40, 50, 60, 70 and l00 TP|
26
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Marbach Dle Maklng Solutlons
Greenplate - an ecologlcally sustalnable prod-
uct from Marbach's marbagreen llne
Green plate ls avallable ln l8mm thlck, slze l500 x ll20 mm (59 x 44 ln.)
Thls wlll yleld l dle board for 8obst l45 format, or 2 dle boards for 8obst l06
format cutters.
Some features:
US market termlnology compatlblllty)
- Uv coated less dust due to sealed surface, protects the dle board, works
back to the board wlthout loslng adheslve quallty. Thls ls ldeal for grlndlng a
- wlth l8mm thlck dle board, rubber only needs to be 7mm, therefore no need
- Much more reslstant to molsture than regular wooden dle boards less
growlng/shrlnklng of the dle
- Tlghter helght tolerance than wooden dle board more equal pressure across
surface
- l8mm wood helght glves more guldance to the rule than 5/8" dle boards
rule less llkely to bend or shlft
- Our customers are uslng green plate wlth steel counters ln the l06 format
our advantages uslng the Mpower Technology
cuttlng process:
-
Por you, thls means an lncrease of your productlon capaclty. Consequently your produc-
your customers much better.
- Conslderably hlgher llfetlme
Due to the fact that the Mpower cuttlng rule ls able to work under hlgher pressure than a
conventlonal cuttlng rule the llfetlme of the Mpower rule ls longer. Thls ls very lmportant
for you both for long runs and for frequent repeat orders. 8ecause not only the number
of sheets you cut damages the knlfe but rather the number of set ups.
- No swarf under normal condltlons. The radlus at the tlp of the rule avolds a destruc-
tlon ln thls area. The creatlon of swarf ls thereby prevented and the palette of
blanks ls absolutely free of fuzz.
Marbach blanklng tool llghtblanker - (#l)
The best solutlon for a perfect blank separatlon of low runs
our advantages uslng the marbapusher: (#2)
unlversally useable > no capltal commltment
(#l) (#2)
Marbanlcker.
Thls Nlcker has a retractable welghted top that when dropped creates a 0.lmm
when one slde wears.
27
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Dlemaklng Solutlons
Seperator
Por Conventlonal Strlpplng.
Lead Ldge Guards
Peduces Lead Ldge knlfe fallure by actlng as a brace for rotary dles.
Martln Hoops
l77mm 6l8 for 7" dles.
270mm 922-924, l0-5/8" for 38" dles.
Hoop l228-l232-l330, l3-3/4" for 50" dles.
487mm l628, l9-3/l6" for 66" dles.
what makes Oll-Plo l4l unlque ls that lt causes oll
oll, the staln or the glue, then lt wlll bond to water
and wlll rlnse away cleanly. Por the water rlnse,
you can use anythlng from a hose to a wet rag or
wet sponge----whatever's rlght for the [ob you're
on.
Oll-Plo l4l won't evaporate very fast, so you can
leave lt to dwell on a staln. 8ut, you never need
to leave lt on for more than a few mlnutes. |f
the staln ls thlck, agltate lt wlth a broom, brush,
scraper or whatever tool you llke. |t's also a great
way to remove cured adheslves. Once fully rlnsed,
need any further preparatlon.
NPPA Hazard code: l - l - 0
Oll Plo l4l
Seperators Por Conventlonal Strlpplng
Left and P|ght.
28
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Dlemaklng Solutlons
Potary Mlter Knlves
Mlter Tlght, pre-cut mlter rule, ls deslgned to prevent scrap bulldup by matchlng the
contour of the bevel rules commonly used ln lead edges. 8lades are pre-cut to l/4"
lengths to save tlme ln rullng and slmpllfy programmlng.
Curved avallable: .960", .990", l.00", l.025"
Stralght avallable: .937" .970", .990", l.00"
Steel Pule Puller
for "rocklng" out the rule ln areas as tlght as l/4".
Tru Pold Laser Crease
Provldes accurate fold ln the dlrectlon of the corrugatlon on heavy board, reduces
ropy scores, lmproves dlmenslonal accuracy and reduces checklng ln lamlnated label
appllcatlons. Tru Pold works wlth a bead formed on the 8 polnt head that provldes an
accurate llne score wlth a steel shoulder support.
Channel Lock Pule Pullers
Narrow 1aw Lconomy rule puller from Channel.
Avallable lengths: l0", l2"
Standard Channel Lock Lconomy Pule Puller.
Avallable lengths: 6", 7", 8", l0", l2" and l4"
Glue Plap Pule
where glue wlll be applled. Thls perforatlng rule ls 2
polnt thlck wlth l/32" x l/32" perforated, medlum wave
edge.
Deslgned to be used ln creaslng rule helghts
8obst Pule Lxtractor
Movable peg feet, [aws are replaceable, for use on 2, 3 and 4 polnt rule.
29
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
8ender Gulde
Helmold Dlemaklng Lqulpment
Mandrel Dlameter
(bushlngs, support llnks, adapter
and dle holder lncluded)
Pemale Dle Number
(dles sold separately)
Standard 8ender
Thls unlversal tool ls an excellent starter plece for
maklng slmple bends or a great second machlne.
Comes equlpped wlth ad[ustable stop and slde
gauge.
Deslgned to bend 2 to 3 polnt rule up to l" ln helght.
L-Z 8ender 8endall
The L-Z 8ender 8endall dellvers the same results
as the standard but wlth 75% less pressure. The
new toggle deslgn wlth ergonomlc, varlable
hand posltlon handle accommodates any work-
lng helght and angle that ls comfortable and
convenlent. Comes wlth standard accessorles
ln lll. l.
Deslgned to bend 2 to 3 polnt rule up to l" ln helght.
8ender 8endall
Thls versatlle machlne has an extended back block
whlch allows both standard dles and bendlng
mandrels to be used. The deslgn permlts closer
bends and clrcular shapes to be produced whlch
are beyond the capablllty of the Standard 8ender.
Comes wlth standard accessorles ln lll. l.
Deslgned to bend 2 to 3 polnt rule up to l" ln helght.
Standard 8ender:
Heavy Duty 8ender:
8ender 8endall:
L-Z 8ender 8endall:
L-Z Heavy Duty 8ender:
Power Asslsted 8ender:
Good for 2 & 3 polnt rule wlth slmple bends.
The slmplest tool for bendlng 3 & 4 polnt rule.
Plagshlp tool for bendlng 2 & 3 polnt rule ln versatlle and lntrlcate shapes. Comes wlth standard acces-
sory set.
The most powerful, versatlle tool for bendlng 2 & 3 polnt rule. Comes wlth standard accessory set.
The most powerful and versatlle tool for bendlng 3, 4 and 6 polnt rule.
30
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Avallable Starter Klts
Most Common Accessorles Pound ln Corrugated Dle Shops
Practlonal Slot-8endlng Dle Sets Practlonal Slot-8endlng Dle Sets Mandrel Sets 8endlng Dle Sets
Most Common Dles Pound ln General and Poldlng Carton Dle Shops
3l
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Standard Dles for Helmold Pule 8enders
The Hlghest Quallty Dles Avallable
Helmold's bendlng dles are fabrlcated from the
hlghest quallty hardened tool steel uslng a comput-
er-controlled LDM machlnlng process.
Thls ensures that our dles are the most preclse and
durable dles avallable ln the lndustry.
These lllustratlons only approxlmate the dles and bends and are not true to slze.
Legend
All standard dles shown ln thls catalog are for 2 pt. soft temper rule.
The followlng symbols lndlcate those dles whlch can be opened up for thlcker rule by mllllng a small portlon of the dle.
Dles not marked wlth any symbol cannot be opened up to accommodate thlcker rule.
These dles can be opened up for 3 or 4 pt. rule.
These dles can be opened up for 3 pt. rule only.
There ls no need to open these dles up for 3 or 4 pt. rule.
32
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Standard Dles for Helmold Pule 8enders
These lllustratlons only approxlmate the dles and bends and are not true to slze.
Legend
All standard dles shown ln thls catalog are for 2 pt. soft temper rule. The followlng symbols lndlcate those dles whlch can be opened up for thlcker
rule by mllllng a small portlon of the dle. Dles not marked wlth any symbol cannot be opened up to accommodate thlcker rule.
These dles can be opened up for 3 or 4 pt. rule.
These dles can be opened up for 3 pt. rule only.
There ls no need to open these dles up for 3 or 4 pt. rule.
33
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
8enders & Notchers
Heavy Duty 8ender
The Heavy Duty 8ender ls slmllar ln deslgn to the Standard
8ender but more powerful for thlcker rule.
Comes equlpped wlth ad[ustable stop and slde gauge.
Optlonal mandrel sets are lntended for bendlng
thlcker rule. The front dle holder ls recessed, keyed and
bolted to ellmlnate sprlnglng and turnlng, and
the rear dle holder slldes out to accommodate any requlred
mandrel.
Deslgned to bend 3 to 4 polnt rule up to 2" ln helght.
L-Z Heavy Duty 8ender
The L -Z Heavy Duty 8ender dellvers the same results as the Heavy
Duty 8ender, but wlth only one fourth the elbow Grease. The
ergonomlc handle accommodates any convenlent helght and angle.
Standard are the vlse-actlon dle holders whlch allow tlghtenlng of
dles. Also standard ls the locklng dovetall back post deslgned to
dellver conslstent bendlng for years.
Deslgned to bend 3 to 4 and 6 polnt rule up to 2" ln helght.
Power Asslsted 8ender and
Power Asslsted Notcher
Peduces shoulder fatlgue and lncreases productlvltyl
The proprletary actuator system provldes proportlonal control whlch
are used to. Deslgned around Helmold's L -Z Heavy Duty Notcher and
8ender, the machlnes are capable of processlng up to 6 polnt rule. They
utlllze standard Helmold bender dles and notch knlves.
34
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Notchers
Standard Notcher
Deslgned to easlly notch 2 polnt rule, and can notch up to 3 polnt rule. Ad[ustable llnk allows male knlves
to be ad[usted after sharpenlng. Lxcellent starter tool or second notcher.
Standard notch slzes:
l/4" x 5/8"
5/l6" x 3/4"
Speclal slzes made to order
Heavy Duty Notcher 2-hole or 4-hole
The Heavy Duty Notcher ls deslgned to easlly notch 3 and 4 polnt rule. |t can also handle sof t crease rule up to 8
polnt and tempered steel up to 6 polnt. Choose between 2-hole or 4-hole female. The 2-hole verslon ls deslgned
to easlly notch up to 6 polnt tempered or 8 polnt soft crease rule. The 4-hole female allows for notchlng smaller
radlus bent rule.
New Narrow Notch House
Thls tlny notch house wlth overall dlmenslons of only l/2 " x l" easlly accommodates notchlng of
pre-bent rule.
Compatlble wlth Standard Notcher.
Speclfy old style (bolts from bottom) or New Style (bolts from top)
L-Z Heavy Duty Notcher, 2-hole or 4-hole
The L-Z Heavy Duty Notcher ls deslgned to cut through the rule wlth a fractlon of the pressure
requlred by regular notchers. Compare 2l0 pounds of pressure to cut through 4 polnt rule wlth
a regular notcher versus 70 pounds of pressure requlred wlth the L-Z Heavy Duty Notcher. Thls
reductlon wln requlred pressure reduces operator fatlgue and ln[urles.
Male & Pemale Notch Knlves
New or Pesharpened
Lvery dle shop should have a spare set on hand to ellmlnate
down tlme when dull knlves are sent out for sharpenlng.
Heavy Duty & L-Z Heavy Duty Notcher
Please speclfy "relleved" for notchlng rotary rule. Avallable notch slzes for 2-hole house:
l/4" x 5/8"
5/l6" x 5/8"
5/l6" x 3/4"
3/8" x 5/8"
3/8" x 3/4"
l/2" x 5/8"
Speclal slzes made to order
Avallable notch slzes for 4-hole house.
l/4" x 5/8"
5/l6" x 5/8"
5/l6" x 3/4"
3/8" x 5/8"
3/8" x 3/4"
Speclal slzes made to order
35
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Sub Head
Cutter Knlves - New or Pesharpened
: Lvery dle shop should have a spare set on hand to ellmlnate down
tlme when dull knlves are sent out for sharpenlng.
Hand Cutter
Thls economlcal, versatlle rule cutter ls ldeal for
cuttlng 2 and 3 polnt rule. Lspeclally good for trlmmlng
pleces of rule fromcolls prlor to bendlng or when a
bench cutter ls not avallable.
Slngle Mlter Machlne
Laslly mlters cuttlng rule to guarantee that the rule edges meet
and no dle cut materlal ls left hanglng.
works for all thlckness of rule.
Mlter Knlves
New or Pesharpened
: Lvery dle shop should have a spare set on
hand to ellmlnate down tlme when dull knlves
are sent out for sharpenlng.
Slde Gauge
Standard Slde Gauge used to set lengths for repetltlve cuts,
up your bendlng, notchlng, cuttlng or mlter machlnes.
Please speclfy the type of machlne lt wlll be used on.
Plght & Left Mlter Machlne
Laslly mlters opposlte end of the formed plece of rule. Thls machlne can mlter
two ends at once, ellmlnatlng the extra step of cuttlng lengths on a cutter,
trlmmlng one end, then settlng up agaln to trlm the other. Also mlters both
ends of small lengths easlly.
Pule Cutter - Standard or Pneumatlc
Thls hlgh performance Helmold Classlc ls now avallable ln standard or pneumatlc, power-asslsted
8oth are deslgned to accurately cut steel rule to length.
Peatures:
Cuts up to 6 polnt tempered steel rule
Lqulpped wlth front and rear guages graduated by slxteenths
Short front gauge allows a cut up to 6"
8ack long gauge allows a cut up to 24"
Knlves are easlly removed for sharpenlng
Avallable cuttlng helghts: l-l/2", 2-l/8", 2-7/8"
Peplacement Llnk & Plns
and mlter machlne wlth new llnk and plns. These
plns translate the movement of the handle to the
slldlng block. Overtlme, wear can occur whlch
lessens the preclslon movement of the machlne.
|t ls qulck, easy and lnexpenslve to replace these
slmple parts and get lmmedlate results.
Please speclfy the type of machlne they wlll be used on.
36
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Steel Pule
Helmold 8evel Gulde Natlonal Steel Pule 8evel Gulde
Advanced Dle Supplles ls proud to carry the followlng steel rule
Steel Pule featured by manufacturer on
the followlng pages...
Creaslng Pule
Hard Crease ls 60-70 temper.
Soft crease ls 35 temper. 8est sulted for use ln block dles or where rule can be easlly lnserted.
Soft crease can bend or deform lf not correctly lnserted. 8oth hardnesses are avallable wlth a tra-
rule has a radlus whlch ls twlce the rule thlckness. Thls shape allows elther edge to be used for
A.
8.
C.
D.
L.
2 PT STD
3 PT STD
4 PT STD
6 PT STD
8 PT STD
DOU8LL PAD|US
DOU8LL PAD|US
l PAD|US
l PAD|US
l PAD|US
60
Center 8evel
52
Center 8evel
42
Center 8evel
Center Pace
Double 8evel
Slde 8evel Slde Pace
Double 8evel
60
Center Pace
Center Pace
Long 8evel
Slde Pace Slde Pace
Long 8evel
A. 8. C. D. L.
Lead Spacers
Avallable:
.5, l, l.5,2,3,4 and 6 polnt thlck
5/8" (.625") and 3/4" (.750") hlgh
37
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Helmold Perforatlng & Mlcroperforatlng Pule
Common Perf Patterns
Por the buslness form and carton lndustrles
Teeth per lnch and declmal spaclng
4 Tooth x .039" S (.2ll"x 0.39") 4 Tooth x .046" S (.204" x 0.46") 6 Tooth x .04O" S (.l27 x 0.40")
Por the corrugated lndustry
Practlonal tooth wldth and spaclng
8 Tooth x .039" S (.86" x 0.39") 9 Tooth x .032 S (.079" x 0.32") l0 Tooth x .032" S (.068" x 0.32")
l2 Tooth x .039" S (.044" x 0.39") l2 Tooth x .032" S (.05l" x 0.32")
l/l6"Tooth x l/l6" S (.062" x .062") l/l6"Tooth x l/32" S (.062" x .03l")
l/4"Tooth x l/l6" S (.250" x 0.62") 3/l6"Tooth x l/l6" S (.l87" x 0.62") 3/8"Tooth x l/2" S (.375" x l.25")
3/l6"Tooth x 3/32" S (.l87"x .093") l/8"Tooth x l/l6"" S (.l25" x .062") l/8"Tooth x l/8" S (.l25"x .l25")
38
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Zlmmer Perforatlng Pule
Comblnatlon Cut-Crease Pule
requlres alternatlng cuts and creases.
Avallable ln l-l/2, 2, 3 and 4 polnt ln all standard
helghts.
3 Tooth x .032" (.30l" or 7.65mm x 0.8l mm) l0%of Hold
4 Tooth x .032'' (.2l8" x 0.32" or 5.54 mmx 8l mm) l3%of Hold
4 Tooth x .060" (.l90" x .060" or 4.83 mm x l.52 mm) 24% of Hold
5 Tooth x .037"(.l68" x .032" or 4.27 mm x 0.8l mm) l6% of Hold
6 Tooth x .032" (.l35" x .032" or 3.43 mmx 0.8l mm) l9% of Hold
6 Tooth x .050" (.ll7" x .050" or 2.97 mmx l.27 mm) 30% of Hold
7 Tooth x .032" (.lll x .032" or 2.82 mm x 0.8l mm) 22% of Hold
8 Tooth x .032" (.093" x .032" or 2.36 mmx 0.8l mm) 26% of Hold
8 Tooth x .050" (.075" x 0.50" or l.9l mmx l.27 mm) 40% of Hold
9 Tooth x .032" (.079" x 0.32" or 2.0l mmx 0.8l mm) 29% of Hold
l0 Tooth x .032" (.068" x 0.32" or l.73 mmx 0.8l mm) 32% of Hold
ll Tooth x .032" (.059" x 0.32" or l.50 mmx 0.8l mm) 35% of Hold
l2 Tooth X .032" (.05l x 0.32" or l.30 mm x 0.8lmm) 39% of Hold
l4 Tooth x .032" (.039" x 0.32" or 0.99 mmx 0.8lmm) 45% of Hold
l6 Tooth x .032" (.03l" x 0.32" or 0.79 mmx 0.8l mm) 5l% of Hold
l7 Tooth x .032" (.027" x 0.32" or 0.69 mmx 0.8l mm) 54% of Hold
39
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Natlonal Steel Pule Ldge wave Pule
Helmold Pull 8ody wave Pule
wave Pule
wave rule has a wlde range of appllcatlons, from cuttlng safety edges on cartons to
avold hand ln[urles, to the deckle edge for greetlng cards. Our wave Pule comes wlth
an edge-only wave for faster and easler lnsertlon.
wave rule reduces dust and combats sharp edges on the dlecut blank, lnstead the
dlecut blank has a medlum wave that acts as a safety edge.
SUPLP P|NL wAvL
M|CPO P|NL wAvL
LXTPA P|NL wAvL
P|NL wAvL
MLD|UM P|NL wAvL
MLD|UM
STANDAPD
MLD|UM COAPSL
COAPSL
LXTPA COAPSL
7/l6 P|TCH
l/2 P|TCH
l.5 pt.
l.5 pt.
l.5 pt.
2 pt.
2 pt.
2 pt.
2 pt.
2 pt.
2 pt.
2 pt.
l.5 pt.
2 pt., 3 pt.
Plne Angle
MedlumAngle
Coarse Angle
Lxtra Plne Angle Hard Temper
Lxtra Plne Angle Soft Temper
Plne Angle
MedlumAngle
Coarse Angle
Deckle Ldge
Scalloped wave (Speclfy center
to center dlstance and depth
of scallops.)
Close wave (Avallable wlth l/64"
or l/32" slot.)
Corrugated Ldge, Plat 8ody
Thlckness Descrlptlon
40
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Steel Pule-2
Zlpper Pule
Tear edge rule ls used to produce easy-to-open packaglng. Avallable ln standard
hand sets.
Also avallable notched or curved ln standard dlameters.
Helmold Pull body Tear Ldge Pule
Natlonal Steel Pule Tear Ldge Pule
4l
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Natlonal Steel Pule
Luro-Cut' Potary Pule
Pequlres less pressure to cut
|mproves dle llfe by reduclng wear on rubber
|mproves strlpplng
Peduces edge crush
Allows faster runnlng speeds
Avallable: 8TP| and l0TP|
Klean Kut Potary Pule
Mlnlmlzes edge crush on the heavlest board
|mproves strlpplng
Made from harder Alloy Steel
Lxcellent bendablllty
Cuts wlth very low pressure
Great for all board types
Lspeclally good as lead and trall knlfe
Peduces anvll wear
Shallower gullet lmproves anvll llfe
Ldge hardened for better wear
Standard rotary hardness for bendablllty
Leaves a smooth edge on products
Nataloy Cuttlng Pule
Natlonal's excluslve alloy formulatlon results ln a
rule that has medlum bendablllty yet wears llke
medlum hard.
Avallable: 2, 3 and 4 polnt from .375" to l.250" hlgh
Prlsm Potary Pule
Longer bevel for lmproved release
Ldge hardened for longer llfe
Peduces edge crush
Good for medlum to heavy board grades
Leaves medlum wave on the dlecut blank
for "safety edge"
Avallable:
8TP| and l0TP|
2,3,4, 6 and 8 polnt
42
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Natlonal Steel Pule
Strlpper Pule & Trlm Strlp
Deslgned to be used to construct a male strlpplng board out of laser burned or [lgged
dleboard. The waved edge lncreases surface contact wlth the waste. A complete male
board can be constructed wlth Strlpper Pule, or lt can be used ln selectlve areas such
as slots.
Avallable:
2" hlgh
Plne to Lxtra Coarse wave
Trlm Strlp comes wlth pln-polnts every 5 mm
Potary wave Pule
A Natlonal excluslve, Potary wave Pule ls deslgned to provlde a more aesthetlc
appearance on dlsplays run on a rotary press. Potary wave can be used to leave a
safety edge on blanks that wlll be hand-assembled.
Potary Perforatlng Pule
Used as perforatlng rule for foldlng, holdlng blanks together or as a tear rule. Use serrated
perforatlng rule when the tooth of the perf exceeds 3/8". Standard gullet depth ls 3/l6".
Avallable on request, gullets up to l/8".
No Notch Curved Pule
Curved rule wlth no back notch. works well ln places where a solld rule wlll add strength.
Avallable:
Dlameters ll" and up
Potary Punches
Deslgned to cut cleanly through all board grades. Natlonal
Potary punches are serrated wlth 8TP|, l2TP|, Shallow
Avallable:
wlth lnslde or center bevel
Standard helghts . 990"and l.030"
Cut slze dlameter 3/l6" - l-l/4"
Other helghts and outslde bevel avallable on speclal order
Outslde 8evel Center 8evel |nslde 8evel
43
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Natlonal Steel Pule
Laser Crease
Natlonal's Laser Crease ls englneered to save tlme and money ln two
ways. Plrst, Laser Crease enables you to burn or [lg dleboard faster by
ellmlnatlng the need to cut thlcker llnes when wlder scores are needed.
Laser Crease also allows you to alter the wldth of the score wlthout
havlng to go back and recut a llne.
Standard Laser Crease
A. 3 ON 2 STD PAD|US TOP
8. 4 ON 2 STD PAD|US TOP
C. 4 ON 3 STD PAD|US TOP
D. 6 ON 3 STD CPOwN TOP
L. 8 ON 3 STD CPOwN TOP
P. 6 ON 4 STD CPOwN TOP
G. 8 ON 4 STD CPOwN TOP
Natlonal Steel Pule Tear Ldge Pule
A. 8. C. D. L. P. G.
l0 TP| PP|SM STD l0TP| l0 TP|
KLLAN KUT
ll TP| STD l2 TP| l3TP|
DLLP v
STD 8 TP|
8TP| PP|SM
8TP| DLLP v 8 TP| KLLAN KUT l3 TP|
KLLAN KUT
l6 TP| 20 TP|
LUP0-CUT or SST STD SCALLOP SHALLOw PPOP|LL N250 SCALLOP N500 SCALLOP 5 TP|
6 TP| 4.6 TP| 2.7 TP|
44
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Zlmmer Steel Pule
Porme Cut
Mlnlmlzes edge crush
|mproves strlpplng
Lxtends blanket llfe
Lxcellent bendablllty
Avallable:
8TP| and l0TP|
Non Symmetrlcal
Zlmmer ploneered the non-symmetrlcal bevel for serrated steel rule.
Thls product ls the result of many years of testlng and development and
ls proven to perform.
Cuts wlth mlnlmal pressure
Peduces edge crush
Lxcellent bendablllty
Avallable:
8TP|, lOTP| and l3TP|
Creates a clean, scalloped edge on corrugated or synthetlc materlal
Scalloped edge acts as a safety edge
Solutlon for dlecuttlng problem materlal
Avallable:
QCl00
Lxtraordlnary knlfe for cuttlng or perforatlng
Lxceptlonal value
Pecommended for cuttlng plastlc, synthetlcs, foam and tear-reslstant materlal
Standard Serrated
Good for cuttlng heavler board
versatlle rule for cuttlng across and around the cyllnder
All Standard Serrated are avallable.
Substantlally reduces pressure
Lxcellent for cuttlng plastlc corrugate
Pecommended for cuttlng plastlc, rubber and textlles wlth mlnlmal
penetratlon
Avallable:
l4TP|
45
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Punches
Lvery punch ls case-hardened to a depth of 0.003"to 0.005" and a
nomlnal Pockwell hardness of Pc 60-62. Deep case-hardened and tempered
power punches are also avallable for heavy duty appllcatlons. we stock a wlde
varlety of standard cuttlng slzes from l/32" to 2-63/64" and from .9l8" to l.500" hlgh.
Standard Tube Punches
Standard helghts: .9l8", .923", .937"and l"
Other helghts avallable upon request.
Avallable wlth or wlthout sprlngs or Punch Pubba
Center 8evel
Avallable cut dlameter:
l/l6" to 3" ln lncrements of l/l6"
|nslde 8evel
Avallable cut dlameter:
5/64" to 3" ln lncrements of l/64"
Outslde 8evel
Avallable cut dlameter:
l/32" to 3" ln lncrements of l/64"
Slde Outlet Punches
These punches plck up the slug and feed lt through the slde
of the punch. Thls self-strlpplng feature ellmlnates the need
to hand strlp.

Avallable:
wlth or wlthout a knurled base
wlth or wlthout a relleved shoulder
Standard helghts: .9l8", 923", .937", l"
Non-standard helghts: l.l25", l.250", l.500", 2.000"
Avallable cut dlameter:
l/l6" l9/32" ln lncrements of l/64"
|nslde 8evel Center 8evel Outslde 8evel
46
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Punches
Stralght wall Punches
These punches have the same slze cuttlng edge and tube dlameter.
Use them to glve the stralghtest posslble cut or when space ls a factor
ln the dle. They are deep case hardened for added strength.
Avallable cut dlameter: 3/64" to 3" ln lncrements of l/64"
Cup Punches
These punches are made from a solld steel rod.
They are used when addltlonal strength ls
requlred.
Avallable wlth lnslde, center or outslde bevel
Avallable cut dlameter: l/32"- 3l/64" ln
lncrements of l/64"
Serrated Punches
Natlonal's serrated punches are used ln rotary dlecuttlng.
Avallable:
|nslde, Center and Outslde bevel cut dlameter l/32" to 3" ln
lncrements accordlng to bevel
Standard helghts: .937", .970", l.000" and l.030"
Other helghts avallable.
Polodex Punch
Speclfy wlth wlngs or wlthout wlngs.
Standard helghts: .9l8"and .937"
Other helghts avallable.
Custom Punches
-
catlons for an exact quote.
Punch Pubba
Thls dalsy shaped hard rubber works best for e[ectlng waste from most
punches. No blocklng and rubberlng ls necessary. The rubber wlll not
plerce or trap the board as sprlngs sometlmes do.
Avallable dlameters: l/8", l/4", 5/l6", 3/8", 7/l6", l/2", 9/l6", 5/8",
ll/l6", l3/l6", 3/4", l5/l6"
Avallable helghts: .937'" or cut to slze from meter long stops
47
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Seamless Hanger Hole Punches
Standard avallable helghts: .9l8", .937", l", l l/8", l ", l l/2", 2"
Other helghts avallable
`0utslde dlmenslons have a tolerance of +/- 0.0l5"
48
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
L[ectlon Materlal
T-75
K-l0
K-2G
K-l
P-70
8-65
K-3
G-257
N-55
Dura
Strlp
K-9
Cork
K-l4
Cork
Ped
Phlno
Green
G'rllla
Gum
Pubber
Open Cell
Lxtra Plrm Denslty
Helghts from l/4"- 3/8"
Open Cell
Plrm Denslty
Helghts from 3/l6"- 5/8"
Open Cell
Lxtra Plrm Denslty
Helghts from l/4"- 5/8"
Open Cell
Lxtra Plrm
Denslty
Helghts from l/8"- 5/8"
Open Cell
Plrm Denslty
Helghts from 3/8"- 5/8"
Open Cell
Medlum Denslty
Helghts from l/4"- 5/8"
Open Cell
Medlum Denslty
Helghts from l/8" - l"
Closed Cell
Medlum-Soft
Denslty
Helghts from 3/l6"- l"
Closed Cell
Medlum-Soft
Denslty
Helghts from 3/l6"- l"
Mlcro-Cell
Lxtra Plrm
Denslty
Helghts from l/8"- ll/l6"
Cork-Pubber
Comblnatlon
Lxtra Plrm
Denslty
Helghts from l/l6"-
5/8"
Cork-Pubber
Comblnatlon
Medlum-Plrm
Denslty
Helghts from l/4"- 3/8"
Mlcro-Cell
Premlum Plrm
Denslty
Helghts from l/4"- l"
Mlcro-Cell
Lxtra-Plrm
Denslty
Helghts from "- 5/8"
Closed Cell
Plrm Denslty
Helghts from 3/8" -
9/l6"
wldths from l/32"-
l/4"
versatlle rubber recommended for use
on 8obst' and other hlgh speed presses for foldlng
Prlmarlly for hlgh speed presses for foldlng carton,
gaskets and labels
versatlle rubber used ln general dlecuttlng,
carton and corrugated appllcatlons
Prlmarlly for hlgh speed presses for foldlng carton,
and standard corrugated
Prlmarlly for letterpress, versatlle enough to use
ln paper, carton or corrugated appllcatlons
appllcatlons lncludlng foldlng carton
Skln on one slde for durablllty and adheslon,
used on corrugated dles
make thls rubber excel ln corrugated slats,
punches and as trlm breakers
The comblnatlon of rubber and cork make
thls e[ectlon materlal extremely durable and
reslstant, used on both letterpress and hlgh
speed presses
The comblnatlon of rubber and cork
make thls e[ectlon materla l extremely
durable and reslstant, used on both
letterpress and hlgh speed presses
versatlle performance sultable for most
hlgh speed appllcatlons
Prlmarlly used ln hlgh spend appllcatlons for both
corrugated and foldlng carton, excellent slot
e[ector Scalloped or Stralght
Deslgned for use ln foldlng carton slots
L-Z-Set, Slde-wave
L-Z-Set, Slde-wave,
Scalloped and Groovy G'rllla Slot cut
Peatures Appllcatlons Avallable
49
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Speclalty L[ectlon Materlal
8O8ST manufactures a vast range of e[ector rubbers
to cope wlth any productlon sltuatlon that the modern dle
maker mlght encounter.
MaxPolnt"
L [ecto-P|ex"
L-Z-Set"
Sldewave"
Scalloped
8O8ST PPO[ect Pubber
Maroon 20 - 20 Shore A
|deal for use on the upper blanklng tools, thls
aldlng ln pushlng the carton through the
lower grld.
Grey 6500 - 23 Shore A
Partlcularly recommenced for llght materlal
dlecuttlng, llke paper and other commerclal
prlntlng [obs. Also sulted for klss cuttlng ap-
pllcatlons.
8lack 3500 - 3l Shore A
Pecommended for cosmetlc and hlgh end
boxes, and when necessary to reduce rlsks of
marklng carboard counterparts (cuttlng rules
close to bendlng rule).
8lue 75 - 37 Shore A
Used mostly on all areas of the cuttlng dle
and well sulted for most foldlng carton [obs,
except where nlcks need to be safely secured.
8lack and Gold 43 - 43 Shore A
Thls rubber ls too strlp out medlum scrap
areas out of the cuttlng dle, or to secure nlck
areas.
Ped 42 - 42 Shore A
very fast rebound, comblned wlth hardness,
to strlp out small scrap areas out of the cut-
tlng dle, or to secure nlck areas.
50
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
The orlglnal "LuroPubba" for use at nlcks to reduce
sheet transfer.
Avallable l/4" - 3/8" hlgh
Green G'rllla
L[ectlon rubber deslgned for demandlng slot and restrlcted
e[ectlon areas.
Slzes: l/8", 3/l6", l/4", 5/l6", 3/8", 7/l6", l/2", 9/l6", 5/8"
Avallable:
L[ecto-Plex, L-Z-Set, Slde-wave,
Scalloped or Stralght
PSA or regular
Super8lue Strlpplng Poam
blank durlng strlpplng process. Hardler and more economlcal than competltlve foams.
Standard slze: l-5/8" x l-5/8" x 36".
Speclal order other slzes.
Groovy G'rllla
Grooved, wavy shape generates
requlred e[ectlon force ln slots whlle
allowlng room for compresslon wlth no rule
Por slots wldths: l/8", 3/l6", l/4", 5/l6", or 3/8"
Ped Phlno
Most versatlle ThermoPlastlc rubber
|ncrease press speed
wlll not crush the product
wlll not overload the press
Qulck klck for e[ectlng thln substrates wlth the
compresslblllty needed to
handle thlcker substrates
Llfe expectancy of over l,000,000 cycles at
50% compresslon
0. 020" thlckness tolerance
Avallable ln:
Sheets, strlps & blocks
Pegular PSA`and Super Stlcky PSA
L[ecto-Plex, L-Z-Set, Slde-wave
Gray Lconomy Poam
Strlpplng foam for llght welght paper
and board.
Standard Slze: l-l/2" x l-3/4" x 3"
Speclal order other slzes.
Sprlnt Pubba
-
est speed presses. Por use at lead edge and at nlcks. Unlque shape reduces the number
of nlcks necessary. Also combats dustlng, fragmentatlon and angel halr.
Concave base for greatest stablllty
Materlal ls whlte to avold marklng board
Avallable: l/4" - 3/8" hlgh
5l
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Dura-Strlp
Thls low transverse expanslon rubber ls hlghly stable, durable, heat reslstant and con-
for slots, trlm breaker rubber and for punch e[ector.
Avallable helghts, Scalloped: 3/8", 7/l6", l/2", 9/l6", 5/8", ll/l6"
Stralght: l/4", 5/l6", 3/8", 7/l6", l/2", 9/l6", 5/8", ll/l6"
MultlCutter
Cuts rubber, matrlx and varlous materlals. Uses Stanley knlfe blades, safety lock feature.
Plexlcrease
Color-coded corrugated creaslng ald. Deslgned to reduce board damage ln poor
quallty board.
Color-coded for easy, accurate use
New lmproved shape
Padlcal base provldes total stablllty of rubber on the dleboard
Peslstant to heat and Uv degredatlon
Self-lubrlcatlng to reduce board frlctlon
Avallable helghts and colors:
Dleprene 80TM
Dleprene 80, also known as DP8O, wlll perform ln the toughest strlpplng appllcatlons
llke slots, hand holds, punches and tlght scrap areas. Also used as a lead edge trlm
reslstant wlth a fast recovery after compresslon.
Avallable: Scalloped, Stralght, ln blocks, strlps or sheets.
Avallable helghts:
Scalloped: 3/8", 7/l6", ", 9/l6", 5/8", ll/l6"
Stralght: l/4", 5/l6", 3/8", 7/l6", ", 9/l6", 5/8", ll/l6"
Kushlon Krease
Deslgned to reduce fractured scores common ln dry or recycled board. Gentle crush-
lng actlon allows the scorlng rule to form an accurate llne crease on all grades of
corrugated. Use .035" below the scorlng rule.
Avallable:
.l75", .200", .225", .250", .275", .295", .300", .3l5", .325", .335", .355", .370", .380", .395"
Speclfy box or coll
8POwN
PLD
GPA
LLLOw
GPLLN
GOLD
8LUL
PUPPLL
OPANGL
wH|TL
P|NK
8LACK
8L|GL
.l77
.l97
.224
.256
.276
.295
.325
.335
.354
.374
.394
.42l
.433
4.5 mm
5.0 mm
5.7 mm
6.5 mm
7.0 mm
7.5 mm
8.0 mm
8.5 mm
9.0 mm
9.5 mm
l0.0 mm
l0.7 mm
ll.0 mm
Thousandths Mllllmeters
52
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Latex & Cyanoacrylate Adheslves
Clean Strlp
dles. Holds strong and strlps away clean for
fast, easy re-rubberlng.
Avallable ln l gallon contalners.
Super Glue (Cyanoacrylate)
200lC and 2075C are fast settlng, hlgh vlscoslty adheslves for bondlng a varlety of
materlals such as wood, cork and leather as well as most metals, rubbers, and plastlcs.
Slow Settlng 2075C curlng tlme:
Pubber to wood - 7 seconds
Plastlc to plastlc - 8 seconds
Metal to metal - 20 seconds
Past Settlng 200lC curlng tlme:
Pubber to wood - 3 seconds
Plastlc to plastlc - 6 seconds
Metal to metal - l5 seconds
Super Glue Gel
2999 GLL ls a slower settlng, thlxotroplc adheslve for general purpose use. 2999 GLL ls
a non-strlnglng formula ldeal for vertlcal and horlzontal appllcatlons or when the lssue
of adheslve mlgratlon ls crltlcal.
2999 Gel curlng tlme:
Pubber to wood -l5 seconds
Plastlc to plastlc - 25 seconds
Metal to metal - 60 seconds
Dlspenser 8ottles
2 oz. bottles
Accelerator
Alds super glue adheslon by penetratlng
the surface to be bonded and acceleratlng
the hold and set tlme.
Undo
UNDO 6020 Cyanoacrylate (Super Glue) adheslve remover
qulckly softens and dlssolves cured and uncured adheslve from
unwanted areas. Use thls to clean hands and other surfaces. |t
ls an essentlal product for lndustrlal manufacturlng productlon
lnvolvlng the use of cyanoacrylates.
53
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Plnlshlng
Strlpplng Hammer
-
Pubber tlp reduces lmpact damage and ls replaceable. Peplacement heads, handles
and tlps are readlly avallable.
Strlpplng Hammer
Por hand strlpplng trlm and waste.
Avallable: l2 oz. and l6 oz.
Alr Strlpplng Hammers & Chlsel Set
hlgh quallty alr hammer ls avallable wlth optlons such as counter balancers, alr lnput
Strlpmate
8ar-Plate's Strlpmates can handle most any form that requlres lnternal set-up and
strlpplng. Accommodates a 3/4" female form and the male form can be conventlonal
or use one of the lnterchangeable punch assemblles and "T" slldes. Ad[ustable bottom
8obst waste Strlpper
Unlque ln the market, the 8O8ST waste strlpper provldes 400 watts of
87 db. Strlps edge waste l0 tlmes faster than by handl
54
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
Tape & Spray Adheslves
3M' ATG Gun
Double Paced Tape
Multlple appllcatlons. Most common appllcatlon for adherlng counterboard to
cuttlng plate.
Avallable: 2" - l2" wlde
Pelnforced Pllament Tape
Avallable: l/4" - 4" wlde
Pelnforced Gummed Carton Tape
Gum adheslve ls water actlvated.
Standard avallable wldth 3"
Custom wldths avallable
3M Scotch ATG Tape
maklng.
Avallable: l/4"'and l/2" wlde
36 yards long
Masklng Tape
Avallable: l/4" - 4"
55
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Tape & Spray Adheslves
Clear Carton Seallng Tape
Avallable: 2"- 4" wlde
Ped Llthographer's Tape
Used ln screen prlntlng appllcatlons and ln
rnakeready as a ramp for matrlx and counterboard.
Avallable: l/4" - l/2" wlde
3M 77 Spray
The spray adheslve most used to adhere phenollc counter materlal to Cuttlng plates.
metal, plastlcs, rubber and wood. Long open tlme and unlform spray pattern provldes
faster appllcatlon wlth less waste.
Tlp: Lspeclally helpful ln adherlng paper labels to shrlnkwrapped palletsl
Platback Seallng Tape
Lxtra tacky seallng tape.
Avallable: l/4" - 4" wlde
56
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
www.AdvancedDleSupplles.com lnfoQAdvancedDleSupplles.com
3M 77 Adheslve Spray 55
3M Tape 54
Accelerator 52
Accuracy 24
Adheslve Spray 54
Adheslves 52
Adheslve Punners 23
Ad[usto Guldes l4
Ad[ustable Score 24
Alr Strlpplng Hammer 53
Alumlnum Score 2l
Alumlnum Strlpper 2l
Apron l6
ATG Gun & Tape 54
Automatlc Grld 8ender 23
8ack Up Plates l5
8ar-Plate Pule Puller 28
8ar-Plate Tools l8
8ench Press, Matrlx 9
8ender 8endall 29
8enders 29
8endlng Dles 32
8lanklng Accessorles 26
8obst ' Cuttlng Plates l5
8olts 2l
8rldgers 34
8S| Parts 22
8S| workstatlon/Prame Stand 23
Carbon Paper ll
Carton Seallng Tape 54
Centerlng 8racket 2l
Centerllne Gulde, 8lack & Ped 2l
Centerllne Stops 2l
Channel Lock Pule Pullers 28
Chase Plates l5
Chlsel 53
Clamp 20
Clam Shells & Cyllnders 24
Clean Strlpplng Adheslve 52
Clean-up Solvent l3
Comblnatlon Cut-Crease Pule 38
Corrugated Pasteners (Nalls) l6
Counter Materlal l3
Counterboard l2
Counterboard Adheslve 4
Counterplate Locator Plns l3
Creaslng Alds, Corrugated 4
Creaslng Matrlx l0
Creaslng Pule 36
Creaslng Pule, Laser Crease 36
Crown Strlpplng Plns 20
Cup Punches 46
Custom Mllled Punches 46
Cut-Crease 38
Cutawl 8lades l7
Cutawl Saw l7
Cutter Knlves 35
Cuttlng Plate Cleaner l5
Cuttlng Plates l5
Cuttlng Pule l5
Deslgn Tools & Supplles 4
Deslgner's Knlfe 28
Dle Storage 8olts 2l
Dleboard, Plywood ,& Synthetlc l7
Dlemaker's Mallet l6
Dlemaklng Supplles l6
Dleprene 80lM 5l
Dleroom Lqulpment 2l
Dlgltal Saw Stop 23
Dlspenser 8ottles 52
Dlstance Spacers 2l
Double Paced Tape 54
Dremel Grlnder l9
Dremel Moto Tool l9
Dremel wheels l9
Dura Strlp 5l
L-Z 8enders 29
L-Z Peacher l4
L-Z Set L[ectlon Materlal 48
L[ectlon Poam 50
L[ectlon Materlal 48
L[ectlon Pubber for Punches 46
Llastomer Mallets l6
Lmbosslng Type l2
Luro-Cut' Potary Pule 4l
LuroPubba 49
Lxtractors 28
Pasteners l6
Peed-Thru Punches 45
Pemale Dle Number 29
Plbrlx 7
Pllament Tape 55
Plle, Matrlx 9
Plsher Space Pens 4
Plat Dleboard 23
Plat Strlpplng Plns 20
Plexlcrease Corrugated Creaslng Ald 5l
Porme Cut Potary Pule 44
Genulne Pressboard l2
Gloves l6
Glue Asslst Pule 28
Glue Plap Pule 28
Glue Guns 52
Glue Stlcks 52
Grabber l4
Green Plate 26
Green G'rllla L[ectlon Materlal 50
Grlnders l9
Grlndlng wheels l9
Groovy G'rllla wave Slot Pubb 50
Guldes 29
Hammer, Strlpplng 53
Hand Cutter, Pule 35
Hanger Hole Punches 47
Hard Polnt vlklng Pule 36
Harbele Model S225 23
Heavy Duty 8enders 33
Helmold 8evel Gulde 36
Helmold Dleroom Lqulpment 36
Helmold Pule Puller 36
Helmold Steel Pule 36
Hlgh Speed Lookup Quolns l4
Hlgh Speed Pressers 24
1ackets, Cuttlng l5
1lg Saw 8lades l7
1lg Saws l7
1oggers 22
1ute Tag l2
Kevlar Safety Guldes l6
Klean Kut Punches 4l
Klean Kut Potary Pule 4l
Korl Clamp 20
Kushlon Krease 5l
Laborsaber 1lg Saws l7
Laser Crease 43
Lazer 8lade Cuttlng Pule 28
Lead Ldge Guards 27
Lead Spacers 36
Makeready Accessorles l4
Makeready Tape l2
Mallets l6
Mandrel Set 29
Marbanlcker 26
Martln Hoops 27
Martln Mlller vlklng Steel Pule 36
Masklng Tape 54
Matrlx l0
Matrlx & Crease Pule Selector Gulde l0
Matrlx Tools ll
Metal-8ased Matrlx l0
Metrlx 6
Mlcro-Perforatlng Pule 25
MlcroMax 25
Mlcrometers 5
MlcroNlk l9
MlcroPerf 25
MlcroTrak 25
Mlnl Perf-a-Type l8
Mlter Knlves 35
Mlter Machlnes 35
Mlter Tlght 35
Mlterlng Pllers, Matrlx l0
Monroe Pubber 48
& Plastlcs L[ectlon Materlal 48
M-Power 26
Multl-Cutter 5l
Mylar, Matte & Clear 4
Mylar-8ased Matrlx 4
Narrow 1aw Pule Puller 28
Nataloy Cuttlng Pule 4l
Natlonal Steel Pule 36
Natlonal Steel Pule Gulde 36
Nlcklng Accessorles l8
Nlcklng Chlsel Set l9
No Notch Curved Pule 42
No Notch Potary Pule 43
Non Symmetrlcal Potary Pule 44
Notchers 34
Oll Plo-l4l 27
Orlglnal Matrlx l0
Pert-a-Type: Mlnl, Pegular l8
Pert-a-Type: Tracks l8
Perforatlng Pule l8
Phenollc Counter Materlal l3
Plns 20
Plate Cleaner l3
Plates, Dlecuttlng l5
Plotter Pens 4
Plotters 4
Plywood, Plat & Curved 3
Pneumatlc 8ender 33
Pneumatlc Notcher 33
Pneumatlc Tacker 35
Power-Asslsted 8ender,Notcher, Pule 33
Cutter 33
Pre- Nlcked Pule, MlcroNlk l9
Pressboard l2
Pressers 22
Prlsm Potary Pule 4l
Pronged and Pegular Nut 2l
Pro[ect L[ectlon Pubber 49
Punch Pubber 46
Punches 45
QCl 00 Serrated Potary Pule 44
Qulcknlck Grlnder l9
Quoln, Quoln Keys l4
Palls 22
Pawhlde Mallets l6
Ped Phlno Llectlon Materlal 50
Ped Llthographer's Tape 55
Pelnforced Pllament Tape 54
Pelnforced Gummed Carton Tape 54
Peplacement Head l6
Peplacement Llnk and Plns 35
Petractable (Peverse Tooth) 1lg 8lades l7
Peverse 8end Matrlx 6
Plng Knlves l4
Polodex Punches 46
Potary Dleboard 4l
Potary Mlter Knlves 28
Potary Punches 42
Potary Pule 42
Potary wave Pule 42
Pubber, L[ectlon Materlal 49
Pule Cutters 35
Pule Lxtractor 28
Pule Mlters l8
Pule Processors l8
Pule Pullers l8
Pule Setter l8
Pule Sharpener l9
Pule Tamper l8
Pule Tweaker l8
Safety Solvent l3
Sample Maklng Creaslng Pule Holder 4
Sample Maklng Score Tool 4
Sample Maker's Score 4
Sample Tables 4
Scorlng Pule 36
Scrlbes l8
Seaboard Steel Pule 36
Seallng Tape 55
Self-Cleanlng Punches 47
Seperators 27
Serrated Punches 46
Serrated Pule 44
Shlm Tapes l2
Slde Gauge, Pegular or Mlcrometer 35
Slde Outlet Punches 45
Slde-wave L[ectors 39
Sklp-Score Pule 2l
Sklveready Knlves l4
Slot Pubber 48-5l
Soft Grlp Knlfe 4
Solvent l3
Spacers 27
Speed8ar 20
Spot Sheets l2
Spot Tape l2
SprlntPubba 50
Standard Dles 3l
Standard Serrated Potary Pule 44
Starter Klts 30
Steel Pule 36
Steel Pule Puller 28
Steel Shlm Tape l 2
Stop Guldes l2
Storage 8olt & Nut, Orange 2l
Stralght wall Punches 46
Strlpmate Strlpplng Lqulpment 53
Strlpplng Plates 2l
Strlpper Pule 42
Strlpplng 8oard Accessorles 20
Strlpplng Poam 50
Strlpplng Hammers 53
Strlpplng Plns 20
Strlpplng Tools & Lqulpment 20
Super Glue 52
Support Pall 23
Tarbon Poll ll
|ndex |tem
Page
Page Page Page
57
ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS ADvANCLD D|L SUPPL|LS
(866) 343-7757 (800) 600-0l8l
Tear Ldge Pule 40
Thln Plates l5
Tle Pods 2l
Tracks, Pert-a-Type Holder l8
Trlm Strlp Pule 4l
Trlpplexx Spot Sheet ll
Tru Pold Laser Crease 28
Tube Punches 45
Tympan Paper ll
Type, Perf -a-Type l8
U 8end Matrlx 6
U 8end Slzes 6
Undo 52
very Ped Durable Mallet l6
vlklng Steel Pule 36
vlnyl 4
vulcanlzed Plberboard l2
washers l3
waste Strlpper 53
wave Pule 39
wood Chlsel l7
Syntrlx 7
Zlmmer Perforatlng Pule 38
Zlmmer Steel Pule 36
Zlpper Pule 38
page

Potrebbero piacerti anche