Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DE-DUSTING
Functioning principles:
1) The system can work as a pressure-type system, (See Fig 1) with dust or particles moving through the fan (typical of wood industries / workshops). 2) The system can work as a depression-type system, where particles are eliminated either through a simple kiln where the fan is often directly mounted on top of the cyclone (See Fig 2), or through a more complex system with compartments inside the filter, relayed by the introduction of air to eliminate airborne particles (see Fig 3).
DE-DUSTING
Our offer:
Centrifugal fans in a variety of arrangements: Arrangement 5 (direct drive with flanged motors). Arrangement 4 (direct drive with foot motors). Arrangement 1 (belt drive). Arrangement 8 (coupling drive).
PAINT BOOTHS
Our offer:
Belt driven Centripal EU with accessible impeller for cleaning. Centripal EU double inlet for drying and cooling. Centrimaster GT for fresh air introduction via air supply plenums. Europal for incinerators such as e-dip baths. Axicos (axial fans with adjustable-pitch-in-motion) that deliver variable flows in the cooling systems.
GLASS INDUSTRY
Our offer:
Fans are of a quite heavy duty type, and have to be robust, efficient and reliable. A complete range of motor powers is also necessary up to a few hundred kWs. Direct, belt and coupling drive arrangement are needed because of temperature, mechanical life time and cycle conditions. Centripal EU, Europal and Technopal fans are all used for this application.
CHEMICALS PETROCHEMICALS
Our offer:
Flakt Woods offers a complete range of ATEX compliant fans, and is one of the pioneers of this application, being integral to the development of this new standard. Fans must be highly reliable and efficient, often of a high pressure type, capable of withstanding high corrosion environments, often to following API norms outside Europe for petroleum companies. Special shaft seals, special materials, tailor made executions characterise the design of these fans. Centripal EU , Europal , Single or Two Stage Technopal fans are suitable for these applications. JM Aerofoils are often used in less harsh environments.
Our offer:
2100 series for building ventilation. JM axial flow fans single stage or double stage for grain drying or for larger building ventilation. GT centrifugal fans in a non ATEX grain drying. JM and Centripal EU for ATEX version.
Our offer:
Flkt Woods has a complete range of high pressure direct driven centrifugal fans in the EU range. The main advantage over the competition is the ability to provide a direct driven solution up to 1400 mm diameter. Due to our vast experience in ovens, and special materials and alloys, we are able to provide customers with solutions up to 800C continuous in re-circulating fans.
TEXTILE
Our offer:
2100 series for building ventilation. JM axial flow fans single stage or double stage for grain drying or for larger building ventilation. GT centrifugal fans in a non ATEX grain drying. JM and Centripal EU for ATEX version.
Fans in this process are used to dry the paper along the process:
either exhausting air, creating a depression under paper paste (i.e high pressure fans (8000 to 10000 Pa), with a stainless steel construction. or paper paste is going through an oven and standard construction fans of medium pressure and 160C continuous and are used for air circulation to evacuate calories.
Our offer :
Wood industry:
JM axial flow fans range in stainless steel or galvanised version. Centripal EU equipped with T blades for de-dusting matters during wood transformation process.
Paper industry:
Centripal EU medium and high pressure types, in stainless steel or mild steel versions for paper drying.
10
INCINERATION PLANTS
Our offer:
Flkt Woods offers a complete range of heavy duty fans, from Europal to Technopal fans, depending on duty requested, from 800 to 5000 mm impeller diameter, capable to withstand temperature and tough working conditions.
11
MICRO-CHIPS
Our offer:
Flkt Woods offers a complete range of centrifugal fans, from Centripal EU and Europal range, stainless steel versions or with special coating, and Axicos as axial flow fans range with adjustable pitch in motion impellers.
12
FOOD INDUSTRY
Our offer :
Stainless steel centrifugal and axial flow fans, part of the JM and Centripal EU range. High efficiencies and low noise levels are essential characteristics of fans for this industry.
13
Our Offer :
Compac Climafan; Aerofoil Climafan; 2100 Series Flkt Woods offers a wide range of axial flow fans to satisfy most heat transfer applications. Our products are specifically designed to provide the widest coverage of performance characteristics, coupled with the lowest noise levels, ensuring that most customer requirements are satisfied.
14
Our offer:
Flkt Woods has all the products needed, from a complete HVAC system to a stainless steel JM axial or EU centrifugal fan in stainless steel execution, which can be equipped with inlet guide vanes regulation.
15
Our offer:
Tailor made or adapted axial flow fans , centrifugal fans, mixed flow technologies, using latest technologies of composite, aluminium, mild steel or stainless steel materials, and bringing the best efficiencies to our customer, to allow them making their machine different on the market
16
ROLLING STOCK
Our offer:
Fans located in Rolling Stock applications are completely tailor made. Needs can be from axial aerodynamic characteristics for transformer cooling, to high pressure centrifugal for motor and braking resistor cooling.
17
CEMENT
Our offer:
Flkt Woods through Solyvent brand name has unrivalled experience in TECHNOPAL fans for cement applications, and has adapted its fan technology to cope with these requirements: highest efficiencies (more than 85 %). gas flow / control regulation. command of vibration and noise. wear protection on highly efficient impeller design. And an innovative concept called Hermit Crab which consists in replacing the competitors impeller with one of our impellers, keeping in place the casing. Challenge is to sell an increased capacity, a better efficiency, or a longer life expectation.
18
STEEL
Our offer:
Flkt Woods through Solyvent brand name has unrivalled experience in TECHNOPAL fans for steel applications, with continuous innovation through: small deflector blades, positioned on the impeller centre hub, alter the dust particle trajectories, and increase impeller life expectancy by 10 times. use of ceramic, tungsten, special stainless steels hastalloy, URANUS, rubber coatings ... impeller water cleaning systems in running. Others fans such as large axial flow fans for air introduction, or large centrifugal exhausters for the ovens are part of our range, providing our customers with a good global efficiency and reliability.
19
POWER PLANTS
Our offer:
Some Technopal centrifugal fans in double inlet form have been specially designed for power plant applications, with impellers up to 4,5 meters and 10 M Watts, it is possible to replace two or three competitor fans with one large Flakt Wods unit. With PF axial flow fan technology, Flkt Woods innovates again in alimentation of fresh air for the boilers. Highest efficiencies up to 92 % are allowing Flkt Woods to sell an unrivalled premium design in Centrifugal and Axial flow fans technology. Building site ventilation and Turbine Halls are all equipped with smaller axial flow fans from our standardized ranges.
20
TUNNELS
Our offer:
Flkt Woods range of AXIJET / Jetfans and AXICENT / Large JM fans have provided solutions worldwide for: Our offering for these projects can range from just equipment supply to the provision of a complete subsystem. A typical offering can include dampers, attenuators, transformations sections, fans, antivibration equipment and starters / inverters. System optimisation is based on detailed knowledge of the individual system components and the interaction between them. Design calculations are also performed to confirm both aerodynamic and acoustic performance.
21
Our offer:
Special tailor made axial flow fans. Flkt Woods strength is to provide customer with full proposal and a complete unit which covers the demanded function. We can also in our facilities develop and test the installation.
22
WASTE WATER
Our offer:
Low operation cost compressors for biological waste water treatment. A combination of high-speed motor drive and high performance carbon fibre composite impeller elevates compressor technology to a new level. High efficiency medium pressures / high volumes centrifugals in Stainless steel for mud drying, and smaller high pressure fans for pulsators, belonging to Centripal EU product range.
23
Sales Offices available World Wide See our website for details www.flaktwoods.com Head offices
Building Air Climate
Flkt Woods AB Kung Hans vg 12 SE-192 68 SOLLENTUNA Sweden Tel: +46 8 626 49 00 Fax:+46 8 626 73 10
Flkt Solyvent-Ventec
143, rue de la Rpublique - B.P. 67 69882 Meyzieu Cedex France t + 33 (0) 4 72 45 13 00 f + 33 (0) 4 72 45 13 42 w www.flaktwoods.com
Flkt Woods reserves its rights to modify the technical datas described in the document anytime. Informations are not contractual. Should you need any further information, please contact the local agent in your country.
24
TS-JPG - (V - 08/2004)