Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
RoHS
Specification Z7
SSC
Drawn Approval
Customer
Approval
[ Contents ]
Description
Full code of Z7 series
------- 3 ------- 4 ------- 5 ------- 6 ------- 8 ------- 15 ------- 17 ------- 18 ------- 19 ------- 20 ------- 21 ------- 22 ------- 24
3. 4. 5. 6. 7. 8. 9. 8. 9.
Outline dimension Characteristics of Z7 Characteristic diagrams CIE Chromaticity Diagram Binning Table Labeling Reel Packing Recommended solder pad Soldering profile
Z7
Description
The Z-Power series is designed for high current operation and high flux output applications. It incorporates state of the art SMD design and low thermal resistant material. The Z Power LED is ideal light sources for general illumination applications, custom designed solutions, automotive, large LCD backlights and high performance torches.
Z7
Features
Super high Flux output and high Luminance Designed for high current operation SMT solderable Lead Free product RoHS compliant
Applications
General Torch Architectural lighting Task lighting Decorative / Pathway lighting Remote / Solar powered lighting Street lighting
* The appearance and specifications of the product can be changed for improvement without notice.
Rank :
QUANTITY : 500
X9X10X11X12X13
Lot No : #########
SSC PART NUMBER : X1X2X3X4X5X6X7X8
X1X2X3X4X5X6X7X8
Outline dimensions
Notes : [1] All dimensions are in millimeters. [2] Scale : none [3] Undefined tolerance is 0.2mm
Characteristics of Z7 (SZW07A0A)
1. Pure white
1-1 Electro-Optical characteristics at 1400mA
Value Parameter Luminous Flux
[1]
(Ta=25, RH30%)
Unit Min Typ 490 6000 70 3.3 1.6 130 Max 530 8200 75 4 lm K V K/W deg. 390 4700 65 -
Correlated Color Temperature [3] CRI Forward Voltage [4] Thermal resistance (J to S) View Angle
RJ-S 2
Value 2800 (each chip 700mA) 5 11 135 -40 ~ +85 -40 ~ +100 3,000V HBM
Unit mA V W -
*Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrating sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT 5% tolerance. [4] Tolerance is 0.06V on forward voltage measurements [5] A zener diode is included to protect the product from ESD. [6] At thermal Resistance, J to S means junction to solder point on metal PCB.
Characteristics of Z7 (SZWW7A0A)
1. Warm white
1-1 Electro-Optical characteristics at 1400mA
Value Parameter Luminous Flux
[1] [3]
Unit Typ 355 3000 80 3.3 1.6 130 Max 410 4 lm K V K/W deg. 290 -
VF RJ-S 2
Value 2800 (each chip 700mA) 5 11 135 -40 ~ +85 -40 ~ +100 3,000V HBM
Unit mA V W -
*Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrating sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT 5% tolerance. [4] Tolerance is 0.06V on forward voltage measurements [5] A zener diode is included to protect the product from ESD. [6] At thermal Resistance, J to S means junction to solder point on metal PCB.
Color Spectrum
(IF=350mA, Ta=25, RH 30%)
2.5
Pure Warm
2.0
1.5
1.0
0.5
Wavelength [nm]
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Z7
0.0 0 400 800 1200 1600 2000 2400 2800
www.seoulsemicon.com
Chromaticity Coordinate
CCT [K]
0.012
0.009
0.006
0.003
0.000
-0.003
-0.006
400
800
1200
1600
2000
2400
2800
Current [mA]
Pure Warm
6000
5000
4000
Current [mA]
www.seoulsemicon.com
80
60
40
20
0 25
50
75
100
125
150
0.0
-0.2
-0.4
-0.6
-0.8
-1.0 25
50
75
100
125
150
www.seoulsemicon.com
Chromaticity Coordinate
CCT [K]
7000
6000
Pure Warm
5000
4000
www.seoulsemicon.com
Fordward Current(mA)
Forward Current(mA)
20
40
60
80
100
Ambient Temperature(C)
Ambient Temperature vs. Allowable Forward Current @2800mA
3000
2500
2000
1500
Rj-a=8/W
1000
Rj-a=10/W Rj-a=12/W
500
0 0 20 40 60 80 100
Ambient Temperature(C)
www.seoulsemicon.com
1.0
0.8
0.6
0.4
0.2
0.0 -90
-60
-30
30
60
90
Angle [degree]
Binning Table
Bin Code Luminous Flux (lm) @ IF = 1400mA V2 Color Chromaticity Coordinate @ IF = 1400mA C2 Forward Voltage (V) @ IF = 1400mA H
Max. 340
Min.
Max.
H I
J K
Available ranks
Label
Rank :
QUANTITY : 500
X9X10X11X12X13
Lot No : #########
SSC PART NUMBER :: SZDW7A0A SZW07A0A SZDW7A0A
Rank
X9X10X11X12X13
- X9X10 : Luminous Flux : LF [lm] - X11X12 : Color Coordinates : x, y - X13 : Forward Voltage : VF [V]
Z7 (Rev. 03) March. 2012 www.seoulsemicon.com
CATHODE MARK
Notes : [1] All dimensions are in millimeters. [2] Scale : none [3] This drawing without tolerances are for reference only [4] Recommended solder paste height : 30um
IPC/JEDEC J-STD-020C
Profile Feature Average ramp-up rate (Tsmax to Tp) Preheat - Temperature Min (Tsmin) - Temperature Max (Tsmax) - Time (Tsmin to Tsmax) (ts) Time maintained above: - Temperature (TL) - Time (tL) Peak Temperature (Tp) Time within 5C of actual Peak Temperature (tp)2 Ramp-down Rate Time 25C to Peak Temperature Sn-Pb Eutectic Assembly 3 C/second max. 100 C 150 C 60-120 seconds 183 C 60-150 seconds 215 10-30 seconds 6 C/second max. 6 minutes max. Pb-Free Assembly 3 C/second max. 150 C 200 C 60-180 seconds 217 C 60-150 seconds 260 20-40 seconds 6 C/second max. 8 minutes max.
* Caution 1. Reflow soldering should not be done more than one time. 2. Repairs should not be done after the LEDs have been soldered. When repair is unavoidable, suitable tools must be used. 3. Die slug is to be soldered. 4. When soldering, do not put stress on the LEDs during heating. 5. After soldering, do not warp the circuit board. 6. Recommend to use a convection type reflow machine with 7 ~ 8 zones. Z7 (Rev. 03) March. 2012 www.seoulsemicon.com
Revision Profile
No
00 01 02 03 February.2012 March. 2012
Change Date
Change Issue
The institution of datasheet Add flux rank Revision of data Datasheet merge between pure and warm white
Version