Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SIEMENS
Compact size, high IP rating busbar can carry large current ratings through the most difficult environments.
A universal connector enables LR Cast Resin busbar to be linked to the LX busbar system, reducing both cost and installation times.
6.1
Dimensions
N L1 L2 L3 N L1 L2 L3 PE
N L1 L2 L3
N L1 L2 L3 PE
N L1 L2 L3
N L1 L2 L3 PE
90
90
100
120
100
120
Copper 6301000A
Copper 13503150A
Copper 40006150A
Typical Specification
The following is intended as a guide to specifying LR Cast Resin Busbar Trunking:
All busbar systems shall be of approved manufacture and comply with degree of protection IP68, as defined in IEC60529. The current ratings shall be as defined on technical data sheets, drawings and schedules. The trunking shall be suitable for use up to 1000V 50Hz supply, and available in 4 and 5 bar versions, and meet the requirements of the IEE wiring regulations (BS7671) and IEC60439-1 and IEC60439-2. The enclosure shall be manufactured from an agglomerate of quartz and epoxy. Phase and Neutral conductors (as well as the internal PE conductor where required) shall be HDHC copper, of equal cross section. The busbar must maintain its rated current when mounted in any installation position (flat, edge or vertical). The single body system shall cover up to 3150A in a single-conductor single-body construction, and up to 6150A in a doubleconductor single-body construction. Various junction units shall be supplied as standard, including elbows, knees, tees and flanged switchboard connections. The Cast Resin Busbar trunking shall be Siemens LRC range or equal and approved.
6.2
100x110 100x130 100x150 100x190 100x230 100x270 100x380 100x460 100x540 472 26.6 55.8 SB 592 53 117 SB 712 53 117 SB 944 65 143 SB 1184 65 143 SB 1424 65 143 SB 1889 100 220 SB 2368 100 220 SB 2849 100 220 SB
120x110 120x130 120x150 120x190 120x230 120x270 120x380 120x460 120x540 472 26.6 55.8 SB 592 53 117 SB 712 53 117 SB 944 65 143 SB 1184 65 143 SB 1424 65 143 SB 1889 100 220 SB 2368 100 220 SB 2849 100 220 SB
100x110 100x130 100x150 100x190 100x230 100x270 100x380 100x460 100x540 472 65 140 SB 592 65 140 SB 712 65 140 SB 944 65 140 SB 1184 80 176 SB 1424 80 176 SB 1889 100 220 SB 2368 100 220 SB 2849 100 220 SB
120x110 120x130 120x150 120x190 120x230 120x270 120x380 120x460 120x540 472 65 140 SB 592 65 140 SB 712 65 140 SB 944 65 140 SB 1184 80 176 SB 1424 80 176 SB 1889 100 220 SB 2368 100 220 SB 2849 100 220 SB
6.3
Siemens I BT LV Sharston Road Wythenshawe Manchester M22 4RA Tel: +44 (0) 161 998 5454 Fax: +44 (0) 8456 053114 www.automation.siemens.co.uk
Subject to change without prior notice Printed in the United Kingdom Siemens AG 2010
merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.