Sei sulla pagina 1di 3

L-PRO 4000 Transmission Line Protection Relay with IEC 61850 Station Bus Protocol

L-PRO 4000 Data Sheet L-PRO 4000 Manual Relay Control Panel Manual L-PRO 4000 Ordering Template LED Label Template Software Software Release Descriptio n L-PRO IEC 61850 Certificat e

The L-PRO 4000 is a digital, microprocessor-based line distance protection system that provides comprehensive distance based line protection for medium to extra-high-voltage transmission lines. Apply the L-PRO 4000 system for high-speed distance and directional protection and complete control in multi-breaker applications typically found in ring or breaker-and-a-half substation arrangements.

Applications

Primary and backup protection on transmission and sub-transmission lines (using pilot protection schemes) Overhead lines and underground cables

Fully integrated breaker protection and control for 2 breakers Single and multi breaker applications (i.e. ring-bus and breaker-and-a-half capability, including breaker failure and individual breaker monitoring requiring single pole/threepole auto-reclosing) Backup protection for generators, transformers and reactors

Features and Benefits


Ideal for multi-circuit line applications (to monitor mutual coupling via additional VT and CT inputs) Ultimate flexibility with selectable Single Pole, 3 Pole and Single and 3 Pole tripping and reclosing Competitive operating speed (1.0 to 1.3 cycle operation at 80% reach, ideal for transmission line applications) Flexible Communications o State-of-the-art communications (2 rear ports, 100BASE-TX RJ-45 or 100BASEFX 1300 nm multimode optical with ST style connector to accommodate the industrys latest network-based communications) o Ethernet ports with 2 unique MAC addresses that easily accommodate network access security needs o Front panel USB and 100BASE-TX RJ-45 Ethernet port interfaces (readily accommodate modern standard laptops) Reduced Cost o Substation automation cost includes IEC61850 protocol to display and transfer operational data via local-area network (LAN) for local HMI and wide-area network (WAN) for remote monitoring SCADA o Substation engineering, installation and commissioning cost and times IEC 61850 GOOSE messages communicate high-speed information between IEDs on the substation LAN (including transfer trips, interlocking, load-shedding, and commands) o Product setting time 240 x 128 LCD graphical user interface provides convenient means to check/change specific settings and parameters Improved Overall Response Time o Expedited response to systems events (11 generic front panel LEDs can be mapped to internal elements) allowing operators to quickly identify the cause of system events Easy to Use o Flexible programmable logic for building customized schemes with ProLogic statements 24 control logic statements (total of 192 statements)

o o o

User-friendly, Windows-based relay setting and record analysis software Enhanced DNP3.0 Level 2 SCADA communication protocol including userselectable point lists, class support and multiple master station support Exceptional fault recording capabilities with 96 s/cycle, all channels with events (best combination of waveform accuracy and file size)

Potrebbero piacerti anche