Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Release
SALES CONDITIONS
ORDERS BROC distributes its valves through its sales network in compliance with the delivery terms shown in the specic documents. Customer orders must be transmitted to the Vendor in written form (via fax, telecommunication, or electronic means) and must contain the following information: a) date and place of issue of the order; b) exact name of the Customer company and its complete shipping and billing addresses; c) a reference to the offer made by the Vendor company with the relevant agreed prices (if such an offer exists); d) valid Vendors part numbers and description/specication of all the products to which the order refers; e) the required quantities; f) the quality requirements with which the Vendor must comply; g) the signature of an authorized representative; h) the required delivery date; i) terms of payment; j) shipping agent For Customers supplied by BROC directly, the orders are ofcially as accepted when the relevant order conrmation, duly signed by BROC, arrives at the Customer; or, if such a document is not forthcoming, orders will be considered conrmed by the Vendor, at the terms requested, if they are not explicitly refused in writing within 10 working days from the order date. NOTE: except if otherwise agreed with the Customer, BROC can introduce technical modications to the product specications without notice; in any event, BROC undertakes to execute customer orders/contracts which are already conrmed without applying any modications to the product and/or anyway guaranteeing product interchange. PRODUCT QUALITY AND COMPLIANCE TO THE SPECIFICATIONS All BROC valves are subject to the necessary checks/tests in various production phases in order to guarantee compliance with the specications and settings shown in the catalogues, drawings, and/or technical datasheets; moreover, BROCs production process complies with the Quality System specications dened by UNI EN ISO 9001, certied by an Ofcial Institute. The Customer may make visits to and to carry out Quality AUDITS at the Vendors plant, provided that a specic appointment is agreed. Due to the wide range of variants and operating conditions of the equipment manufactured by the Customers, BROC does not assume any liability for the results of tests performed by third parties. The Customer is therefore responsible for the nal choice of the valve and for the adoption of all the measures required to achieve the functional and safety specications of the system in which the valve is to be installed, in addition to the compliance with any specic regulation or standard applicable to the system in question. In the event of product non compliance due to Vendors mistake, in addition to the warranty coverage here described, the Customer can demand the Vendor to perform the necessary corrective actions in order to promptly improve its quality level. APPLICATION LIMITATIONS The Customer is expressly prohibited from using the products sold by the Vendor for purposes other than those specied in the offer, catalogues, or technical documentation. Specically, BROC s Dealers or Agents are not authorised to approve the use of BROC valves for the following applications: any passenger or goods carrying road vehicle or equipment subject to Highway Safety Standards and Directives, such as (without limitation) steering, or brake systems; aircraft or space vehicles; - ordnance equipment; medical and health products, including life support equipment or vehicles; systems to be used under any Nuclear Regulatory Act or Regulation; systems for use in explosive or otherwise hazardous environments. If the Customer intends to use the valves supplied for any applications falling into one or more of the above categories or other similar categories, or for any applications other than those expressly described in the documentation, or in case of doubts concerning the application, he must require prior specic authorisation directly from BROC and proceed only after such authorisation has been issued in writing. Any damage suffered by the Customer or third parties arising from failure to comply with the above mentioned terms and limitations, or due to non compliance to BROCs instructions/specications shown in the catalogue pages or in the technical drawings, will be borne entirely by the Customer himself. CUSTOMERS OBLIGATIONS TO PREVENT DAMAGES WITHIN HIS OWN PRODUCTION PROCESS If the valves are employed in a production process which could cause substantial damage to the Customer or to third parties in case of assembly line stopping as consequence of defects or lack of availability of valves, the Customer has the responsibility to maintain a safety stock in order to promptly replace the defective or missing parts; the Customer undertakes to engineer the production cycle so that the replacements can be carried out easily.
Rev.0208 A-PD1b
SALES CONDITIONS
In any event, BROC will be responsible for the repair or replacement of any part or valve found to be defective due to its own manufacturing causes. WARRANTY BROC warrants the original purchaser of its valves that the products are free from defects in material and workmanship, when handled, installed and operated under normal conditions, in accordance with BROC and Industry recommended practises, for a period of 36 months from the rst installation, provided that the installation date is within 6 months from the manufacturing date marked on the valve itself. Seals and O-Rings are expressly excluded from the warranty. This warranty is applicable only to the original purchaser of the valves, and is not transferable. This warranty will not apply to products that have been subject to conditions of contamination in the customers hydraulic circuit, or to products which have been incorrectly handled, tted, used or modied/disassembled without the Vendors supervision or authorization. In the event that the Customer believes that the valves or parts of valves supplied are defective for causes attributable to the Vendor, the Customer shall notify the alleged defects by sending a detailed written report, thereby allowing the Vendor to understand and verify the nature of the claimed defects, also through its authorised technical personnel. Once the defect has been analysed and after determination that the defect is attributable to the Vendors fault, BROC will repair or replace the valve within a reasonable time and/or inform the Customer of the cause of such defect. The BROC warranty policy does not provide for refund or credit for the defective material; specically BROC shall not be held responsible under any circumstances for loss of prot, costs of disassembly and reassembly of the product, nor for any damages connected with such operation, nor for any cost related to the tting of the repaired or replaced valves, including losses of earnings related to machine being temporarily out of service. If the valve supplied is to be tted in assembly plants potentially capable of causing damages to third parties of magnitude signicantly greater than the cost of the valve itself, it is the Customers responsibility to adopt all the possible safety measures in order to avoid any such damages; in fact, the production of valves at competitive market prices cannot ensure the total absence of defects, in spite of BROCs continuous concern to provide top quality products. Should the Customer face the need of a Recall Campaign in which an BROC valve is involved, BROCs involvement shall be discussed and agreed between BROC and the Customer prior to the start of any action. Should the Customer face a problem connected with an BROC valve and potentially capable to raise a Product Liability case, the Customer shall immediately notify the Vendor who will participate to the joint analysis of the problem, together with the Customer. NOTE: any warranty condition or obligation different from this policy can be effective only if specically agreed and undersigned by both Parties: Customer andVendor. TECHNICAL ASSISTANCE BROC guarantees to the Customer its availability to perform free of charge a joint analysis of any defect reported by end users, also when such analysis is to be carried out at the Customers site, provided that the timing is reciprocally agreed. However, if the malfunction is found to be not due to BROCs responsibility, the Vendor will issue a debit note to the Customer for the cost of the services rendered. When the Customer requires the assistance of BROCs engineers on its sites, he shall make a written request to this effect (which can be transmitted also by e-mail or fax). STATEMENT The valves described in this catalogue can be employed in systems or machines falling under the specications of the EEC European Directive 98/37/CE (Machine Directive) and later amendments. The valves shall not be operated, adjusted or disassembled before the complete machines are veried to be in compliance with the requirements of the above mentioned Directive. APPLICABLE LAW For all matters that are here omitted, any delivery performed by BROC directly will be subject to the applicable provisions of the Italian law. If the Customers address is in a Foreign Country, any case of dispute, also of International nature, which should arise from these sales conditions shall be subject to the provisions of the Italian Law, with the sole competence of the Court of Modena Italy. ATTENTION Limited to the valves and related products here included, this catalogue cancels and supersedes any prior issue. All rights are reserved. It is specically forbidden to reproduce partially or totally the present catalogue.
Rev.0208
A-PD1c
Description
STVU-08A VRFA-08A VRFA-10A VRFB-10A VRFC-10A VRFD-10A DRFN-10A DRFN-16A DSDN-16A DSDN-10A VSAN-08A VSBN-08F VSBN-08A VSBN-10A VSBG-10A VS-5-CF-T8A VS-5-CF VS-5-CN-T8A VS-5-CN VSNG-10A VSPN-16A VSPN-10A VSPC-10A VSPN-10A VSPY-10A VSPY-12A VSPX-12A VSD-250 VSD-350 VSDN-08A VSDN-10A VSP-CC-150 VSKD-10A VUCN-08A VURN-08A VUCN-10A VUCN-16A VURN-10A VUCN-12A VUCN-20A VUCN-20A VUCN-10A-TR VSON-10A VSON-08U VSON-08A VSON-12H VSON-12A
Page
71 72 73 74 75 76 79 80 78 77 37 39 38 40 41 35 36 33 34 46 49 47 50 48 51 52 53 44 45 42 43 56 57 81 87 82 85 88 84 86 89 83 98 94 97 101 99
Code
04.33.07 - X - 86 - Z 04.33.08 - X - 27 - Z 04.33.09 - X - 47 - Z 04.33.10 - X - 85 - Z 04.34.04 - X - 57 - Z 04.34.04 - X - 85 - Z 04.39.01.00.56 - Z 04.52.20 - X - 20 - Z 04.52.20 - X - 56 - Z 04.52.21 - X - 20 - Z 04.52.25 - X - 58 - Z 04.52.27 - X - 86 - Z 04.52.28 - X - 15 - Z 04.52.28 - X - 57 - Z 04.52.29 - X - 27 - Z 04.52.30 - X - 20 - Z 04.52.31 - X - 85 - Z 04.52.35 - X - 47 - Z 04.54.04 - X - 20 - Z 04.54.04 - X - 56 - Z 04.54.08 - X - 15 - Z 04.54.08 - X - 57 - Z 04.54.08 - X - 86 - Z 04.54.09 - X - 20 - Z 04.54.09 - X - 85 - Z 04.54.10 - X - 27 - Z 04.54.11 - X - 47 - Z 04.54.13 - X - 58 - Z 04.59.08 - X - 20 - Z 04.59.08 - X - 56 - Z 04.59.12 - X - 47 - Z 04.59.13 - X - 15 - Z 04.59.13 - X - 86 - Z 04.59.15 - X - 20 - Z 04.59.16 - X - 85 - Z 04.59.18 - X - 58 - Z 04.59.22 - X - 20 - Z 04.59.23 - X - 86 - Z 04.59.24 - X - 47 - Z 04.59.25 - X - 47 - Z 04.59.26 - X - 57 - Z 04.59.27 - X - 27 - Z 04.75.10 - X - 99 - Z 04.75.21 - X - 56 - Z 04.77.17 - X - 85 - Z 04.77.19 - X - 27 - Z 04.77.20 - X - 27 - Z
Description
VSON-12U VSON-16A VSON-16U VSOA-10A VUPC-12A VUPC-10A VUDN-08A VBSN-08HH VBSN-08AA VBSN-08UU VBSN-20A VBSN-12U VBSN-12H VBSN-12A VBSN-16A VBSN-08U VBSN-10A VBSN-16U VBSP-08HH VBSP-08AA VBSP-12H VBSP-12A VBSP-12U VBSP-08U VBSP-10A VBSP-16A VBSP-16U VBSP-20A VBST-08HH VBST-08AA VBST-16U VBST-12HH VBST-12U VBST-08U VBST-10A VBST-20A VBSY-08U VBSY-12U VBSY-16U VBST-16U VBST-12A VBST-16A VMSP-78 VMSN-08A VDSR-10A-6 VDSJ-16A VDSC-16A
Page
95 100 96 102 104 103 93 134 119 105 123 107 135 121 122 106 120 108 136 124 137 126 110 109 125 127 111 128 138 129 114 139 113 112 130 133 116 117 118 115 131 132 55 54 144 152 147
A00.901
Description
VDSC-12A VDSC-10A VDSD-16A VDSD-10A VDSB-10A-6 VDSH-10A VDSK-10A VDSA-10A-6 VDSA-10A VDSB-10A VLST-16A VLST-12A VLST-20A VLST-10A VLSC-16A VLSC-20A VLSC-10A VLSP-16A VLSP-12A VLSP-20A VLSP-10A VLSR-16A VLSR-12A VLSR-20A VLSR-10A VLSQ-16A VLSQ-12A VLSQ-10A VCSQ-16A VCSQ-12A VCSQ-10A VLDT-10A VRLA-16A-S VRLA-12A-S VRLA-20A-S VRLA-16A-D VRLA-12A-D VRLA-20A-D VRPP-10A VRPX-10A VRPP-12A SELB-08A SELC-08A SELC-04A VRPR-10A VRPD-10A VRPR-10A-8
Page
146 145 149 148 142 150 151 140 141 143 155 154 156 153 162 163 161 159 158 160 157 166 165 167 164 170 169 168 173 172 171 180 175 174 176 178 177 179 63 65 64 91 92 90 60 62 61
Code
04.95.09 - X - 99 - Z 04.95.11.83.56 - Z 04.98.03 - X - 99 - Z OD.02.07.01.30-Z-02 OD.02.07-X-Y-Z-02 OD.02.09.01.30-Z-01 OD.02.09-X-Y-Z-01 OD.02.17-X-Y-Z OD.02.17-X-Y-Z OD.02.17-X-Y-Z OD.02.17-X-Y-Z OD.02.17-X-Y-Z OD.11.01.18-Y-00 OD.11.02.18-Y-00 OD.11.03.18-Y-00 OD.11.04.18-Y-00 OD.11.31.18-Y-00 OD.11.31.18-Y-00 OD.13.10.51-Y-00 OD.13.10.77-Y-00 OD.13.11.51-Y-00 OD.13.11.77-Y-00 OD.13.20.51-Y-00 OD.13.20.77-Y-00 OD.13.30.51-Y-00 OD.13.30.77-Y-00 OD.14.31.58-Y-00 OD.14.31.78-Y-00 OD.14.32.58-Y-00 OD.14.32.78-Y-00 OD.14.40.58-Y-00 OD.14.40.78-Y-00 OD.14.41.58-Y-00 OD.14.41.78-Y-00 OD.15.03.04-Y-S0 OD.15.03.18-Y-80 OD.15.03.18-Y-S0 OD.15.03.36-Y-S0 OD.15.03.36-Y-S8 OD.15.03.75-Y-00 OD.15.03.75-Y-80 OD.15.03.75-Y-S0 OD.15.03.89-Y-S0 OD.15.03.89-Y-S8 OD.15.04.04-Y-S0 OD.15.04.18-Y-S0 OD.15.04.36-Y-S0
Description
VRPR-07A-S-03 VRPR-08A VEM-5-C-N
S7-H S7-D S5-H S5-D S8-356-H S8-356-A S8-356-G S8-356-D S8-356-AS VED-8I-2A-01-NC VED-8I-2A-01-NA VED-8I-2B-01-NC VED-8I-2B-01-NA VED-8I-2T-06-NC VED-7A-2T-06-NC VED-8I-32-06-SE VED-7I-32-09-SE VED-8I-32-06-SI VED-7I-32-09-SI VED-8I-32-06-NC VED-7I-32-09-NC VED-8I-32-06-NA VED-7I-32-09-NA VED-8I-43-06-CC VED-7I-43-09-CC VED-8I-43-06-ABT VED-7I-43-09-ABT VED-8I-42-06-CA VED-7I-42-09-CA VED-8I-42-06-CC VED-7I-42-09-CC VEI-8A-2B-16-NC-NSS VEI-8A-2B-06-NC-S-X VEI-8A-2B-06-NC-S-NSS VEI-8A-2B-10A-NC-S-NSS VEI-8A-2B-10A-NC-S-X-NSS VEI-7A-2B-16A-NC-S VEI-7A-2B-16A-NC-S-X VEI-8A-2B-16A-NC-S-NSS VEI-8A-2B-12A-NC-S-NSS VEI-8A-2B-12A-NC-S-X-NSS VEI-8A-2B-16-NA-NSS VEI-8A-2B-06-NA-S-NSS VEI-8A-2B-10A-NA-S-NSS
Page
58 59 66 277 278 279 280 275 275 275 276 276 187 223 200 231 211 212 244 245 246 247 248 249 250 251 256 257 258 259 252 253 254 255 210 202 201 203 204 209 208 207 205 206 237 232 233
A00.902
Code
OD.15.04.75-Y-00 OD.15.04.75-Y-S0 OD.15.04.89-Y-S0 OD.15.05.18.3C-Z OD.15.05.18-Y-80 OD.15.05.18-Y-S0 OD.15.05.36-Y-S0 OD.15.05.36-Y-S8 OD.15.05.75-Y-00 OD.15.05.75-Y-80 OD.15.05.75-Y-S0 OD.15.05.89-Y-S0 OD.15.05.89-Y-S8 OD.15.06.18-Y-S0 OD.15.06.36-Y-S0 OD.15.06.75-Y-00 OD.15.06.75-Y-S0 OD.15.06.89-Y-S0 OD.15.07.18-Y-S0 OD.15.08.18-Y-S0 OD.15.11.19-Y-S0 OD.15.12.19-Y-S0 OD.15.31.18-3C-Z OD.15.31.18-Y-80 OD.15.31.18-Y-S0 OD.15.31.36-Y-S0 OD.15.31.36-Y-S8 OD.15.31.75-Y-00 OD.15.31.75-Y-80 OD.15.31.75-Y-S0 OD.15.31.89-Y-S0 OD.15.31.89-Y-S8 OD.15.32.18-Y-S0 OD.15.32.36-Y-S0 OD.15.32.75-Y-00 OD.15.32.75-Y-S0 OD.15.32.89-Y-S0 OD.15-K-X-Y-Z OD.21.01 - X - 36 OD.21.01 - X - 56 OD.21.01 - X - 75 OD.21.01 - X - 89 OD.91.01.77-Y-00 OD.91.06.77-Y-00 OD.92-K-12-Y-00 OD.92-K-77-Y-01
Rev.02.08
Description
VEI-7A-2B-16A-NA-S VEI-8A-2B-16A-NA-S-NSS VEI-8A-2B-12A-NA-S-NSS VEI-8A-2A-06-NC-S-ET-NSS VEI-8A-2A-06-NC-S-X VEI-8A-2A-06-NC-S-NSS VEI-8A-2A-10A-NC-S-NSS VEI-8A-2A-10A-NC-S-X-NSS VEI-7A-2A-16A-NC-S VEI-7A-2A-16A-NC-S-X VEI-8A-2A-16A-NC-S-NSS VEI-8A-2A-12A-NC-S-NSS VEI-8A-2A-12A-NC-S-X-NSS VEI-8A-2A-06-NA-S-NSS VEI-8A-2A-10A-NA-S-NSS VEI-7A-2A-16A-NA-S VEI-8A-2A-16A-NA-S-NSS VEI-8A-2A-12A-NA-S-NSS VEI-8I-2A-06-NC-S1-F-NSS VEI-8I-2A-06-NA-S1-F-NSS VEI-8A-2A-06-NC-VU-S1-NSS VEI-8A-2A-06-NA-VU-S1-NSS VEI-8A-2T-06-NC-S-ET-NSS VEI-8A-2T-06-NC-S-X VEI-8A-2T-06-NC-S-NSS VEI-8A-2T-10A-NC-S-NSS VEI-8A-2T-10A-NC-S-X-NSS VEI-7A-2T-16A-NC-S VEI-7A-2T-16A-NC-S-X VEI-8A-2T-16A-NC-S-NSS VEI-8A-2T-12A-NC-S-NSS VEI-8A-2T-12A-NC-S-X-NSS VEI-8A-2T-06-NA-S-NSS VEI-8A-2T-10A-NA-S-NSS VEI-7A-2T-16A-NA-S VEI-8A-2T-16A-NA-S-NSS VEI-8A-2T-12A-NA-S-NSS VEI-EX SERIES
Page
236 235 234 190 191 189 193 194 198 199 197 195 196 225 227 230 229 228 188 224 192 226 214 215 213 216 217 221 222 220 218 219 238 239 242 241 240 243 68 67 70 69 265 266 271 268
Code
OD.92-K-77-Y-02 OD.92-K-77-Y-03 OD.92.02.77-Y-01 OD.92.02.77-Y-02 OD.92.02.77-Y-03 OD.94.01.18-Y-Z OD.94.05.36-Y-Z OD.94.05.61-Y-Z OD.95.31.18-Y-00 0T.F1.01.00 - Y - Z 0T.F3.01 - X - Y - Z 0T.F4.01 - X - Y - Z 0T.U3.01.00 - Y - Z 0T.U5.01.00 - Y - Z PM.51.10.00.18.00
Description
VEP-5A-2Q-09-NC-4F VEP-5A-2Q-09-NC-6F VEP-5A-2Q-09-NA-2F VEP-5A-2Q-09-NA-4F VEP-5A-2Q-09-NA-6F VEP-5B-2S-D VEP-5B-2S-10A-P VEP-5B-2S-P VEP-5A-2T-06-NC
Page
269 270 272 273 274 262 263 264 267 291 292 293 290 289 181
A00.903
VS-5-CF-T8A VS-5-CF
T-8A 348
35 36
Direct acting guided poppet type Scheme Cartridge description VSBN-08A VSBN-10A VSBN-08F Q gpm (l/min) 5 (20) 13 (50) 5 (20) P psi (bar) 5000 (350) 5000 (350) 5000 (350) Cavity CA-08A-2N CA-10A-2N 06020 Page 38 40 39
VSBG-10A
13 (50)
5000 (350)
CA-10A-2N
41
Direct acting poppet type, differential area Scheme Cartridge description VSDN-08A VSDN-10A VSD-250 VSD-350 Q gpm (l/min) 13 (50) 32 (120) 63 (240) 93 (350) P psi (bar) 5000 (350) 5000 (350) 5000 (350) 3000 (210) Cavity CA-08A-2N CA-10A-2N 003 004 Page 42 43 44 45
Rev. 02.08
Pilot operated spool type Scheme Cartridge description VSPN-10A VSPN-12A VSPN-16A Q gpm (l/min) 32 (120) 53 (200) 79 (300) P psi (bar) 6000 (420) 5000 (350) 6000 (420) Cavity CA-10A-2N CA-12A-2N CA-16A-2N Page 47 48 49
Pilot operated poppet type Scheme Cartridge description VSPC-10A Q gpm (l/min) 21 (80) P psi (bar) 5000 (350) Cavity CA-10A-2N Page 50
Pilot operated spool type, external drain Scheme Cartridge description VSPY-10A VSPY-12A Q gpm (l/min) 32 (120) 53 (200) P psi (bar) 6000 (420) 5000 (350) Cavity CA-10A-3N CA-12A-3N Page 51 52
Rev. 02.08
Priority unloading, pilot operated Scheme Cartridge description VMSN-08A Q gpm (l/min) 1 (3) P psi (bar) 5000 (350) Cavity CA-08A-3N Page 54
Priority unloading, pilot operated Scheme Cartridge description VMSP-78 Q gpm (l/min) 8 (30) P psi (bar) 5000 (350) Cavity CA-10A-4N Page 55
Pilot operated spool type, pressure compensated Scheme Cartridge description VSP-CC-150 Q gpm (l/min) 40 (150) P psi (bar) 6000 (420) Cavity 065 Page 56
Rev. 02.08
Direct acting spool type Scheme Cartridge description VRPR-08A VRPR-10A VRPR-10A-8 Q gpm (l/min) 2 (8) 8 (30) 5 (20) P psi (bar) 5000 (350) 5000 (350) 5000 (350) Cavity CA-08A-3N CA-10A-3N CA-10A-3N Page 59 60 61
Direct acting spool type with pilot controlled setting Scheme Cartridge description VRPD-10A Q gpm (l/min) 5 (20) P psi (bar) 5000 (350) Cavity CA-10A-4N Page 62
Rev. 02.08
Rev. 02.08
2-Way pressure compensated, fixed setting Scheme Cartridge description VRFA-08A SFC1 Q gpm (l/min) up to 2 (8) up to 12 (45) P psi (bar) 3000 (210) 3000 (210) Cavity CA-08A-2N Page 72 291
2-Way pressure compensated, partially adjustable Scheme Cartridge description VRFA-10A VRFB-10A Q gpm (l/min) up to 7 (26) up to 8 (30) P psi (bar) 5000 (350) 5000 (350) Cavity CA-10A-2N CA-10A-2N Page 73 74
2-Way pressure compensated, partially adjustable Scheme Cartridge description VRFC-10A VRFD-10A Q gpm (l/min) 16 (60) 16 (60) P psi (bar) 5000 (350) 5000 (350) Cavity CA-10A-3N CA-10A-3N Page 75 76
10
Rev. 02.08
Flow dividers and Combiners Scheme Cartridge description DRFN-10A DRFN-16A Q gpm (l/min) up to 14 (54) up to 44 (165) P psi (bar) 5000 (350) 5000 (350) Cavity CA-10A-4N CA-16A-4N Page 79 80
Flow control Scheme Cartridge description VCD1 Q gpm (l/min) P psi (bar) 4500 (315) Cavity Page 292
Check valves
Poppet type Scheme Cartridge description VUCN-08A VUCN-10A VUCN-12A VUCN-16A VUCN-20A VUH1
Bosch Rexroth Oil Control S.p.a 11
P psi (bar) 6000 (420) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350)
Page 81 82 84 85 86 289
Rev. 02.08
Poppet type with thermal relief Scheme Cartridge description VUCN-10A-TR Q gpm (l/min) 21 (80) P psi (bar) 5000 (350) Cavity CA-10A-2N Page 83
Directional poppet type, shuttle Scheme Cartridge description SELC-04A SELB-08A Q gpm (l/min) up to 1 (4) up to 2.5 (10) P psi (bar) 5000 (350) 5000 (350) Cavity CA-04A-3Y CA-08A-3N Page 90 91
SELC-08A
up to 2.5 (10)
5000 (350)
CA-08A-2N
92
Directional poppet type, shuttle, double check Scheme Cartridge description VUDN-08A Q gpm (l/min) 2.6 (10) (8) P psi (bar) 5000 (350) Cavity CA-08A-3N Page 93
12
Rev. 02.08
Pilot operated check, pilot to open Scheme Cartridge description VSON-12U VSON-16U VSON-08A VSON-10A VSON-12A VSON-16A VSON-12H Pilot operated check, pilot to open Scheme Cartridge description VSOA-10A Q gpm (l/min) 11 (40) P psi (bar) 5000 (350) Cavity CA-10A-3N Page 102 Q gpm (l/min) 32 (120) 63 (240) 8 (30) 16 (60) 32 (120) 53 (200) 27 (100) P psi (bar) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) Cavity T-2A T-17A CA-08A-3C CA-10A-3C CA-12A-3C CA-16A-3C A12336 Page 95 96 97 98 99 100 101
Pilot operated check, pilot to close Scheme Cartridge description VUPC-10A VUPC-12A Q gpm (l/min) 18 (70) 32 (120) P psi (bar) 5000 (350) 5000 (350) Cavity CA-10A-3C CA-12A-3C Page 103 104
13
Rev. 02.08
Standard poppet type Scheme Cartridge description VBSN-10A VBSN-12A VBSN-16A VBSN-20A VBSN-12H Q gpm (l/min) 16 (60) 32 (120) 53 (200) 85 (320) 32 (120) P psi (bar) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) Cavity CA-10A-3C CA-12A-3C CA-16A-3C CA-20A-3C A12336 Page 120 121 122 123 135
Standard poppet type, differential area Scheme Cartridge description VBSN-08U VBSN-12U VBSN-16U Q gpm (l/min) 16 (60) 32 (120) 63 (240) P psi (bar) 5000 (350) 5000 (350) 6000 (420) Cavity T-11A T-2A T-17A Page 106 107 108
14
Rev. 02.08
Relief compensated, guided poppet type Scheme Cartridge description VBSP-08AA VBSP-08HH Q gpm (l/min) 8 (30) 8 (30) P psi (bar) 5000 (350) 5000 (350) Cavity CA-08A-3C A6610 Page 124 136
Vented guided poppet type Scheme Cartridge description VBST-08U VBST-12U VBST-16U VBST-16U VBST-08AA VBST-10A VBST-12A VBST-16A VBST-20A VBST-08HH VBST-12HH
Bosch Rexroth Oil Control S.p.a 15
Q gpm (l/min) 16 (60) 32 (120) 63 (240) 63 (240) 8 (30) 16 (60) 32 (120) 53 (200) 85 (320) 8 (30) 27 (100)
P psi (bar) 5000 (350) 5000 (350) 6000 (420) 6000 (420) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 6000 (420)
Cavity T-11A T-2A T-17A T-17A CA-08A-3C CA-10A-3C CA-12A-3C CA-16A-3C CA-20A-3C A6610 A12336
Page 112 113 114 115 129 130 131 132 133 138 139
Rev. 02.08
Directional valves
Spool type, direct acting, external pilot, internal drain Scheme Cartridge description VDSA-10A-6 Q gpm (l/min) 8 (30) P psi (bar) 5000 (350) Cavity CA-10A-3N Page 140
Spool type, direct acting, external pilot, internal drain Scheme Cartridge description VDSA-10A Q gpm (l/min) 13 (50) P psi (bar) 5000 (350) Cavity CA-10A-3N Page 141
Spool type, direct acting, external pilot, internal drain Scheme Cartridge description VDSB-10A-6 Q gpm (l/min) 8 (30) P psi (bar) 5000 (350) Cavity CA-10A-3N Page 142
16
Rev. 02.08
Spool type, direct acting, internal pilot, external drain Scheme Cartridge description VDSR-10A-6 Q gpm (l/min) 3 (12) P psi (bar) 5000 (350) Cavity CA-10A-3N Page 144
Spool type, direct acting, external pilot, external vent Scheme Cartridge description VDSC-10A VDSC-12A VDSC-16A Q gpm (l/min) 13 (50) 32 (120) 34 (130) P psi (bar) 5000 (350) 5000 (350) 5000 (350) Cavity CA-10A-3N CA-12A-3N CA-16A-3N Page 145 146 147
Spool type, direct acting, external pilot, external vent Scheme Cartridge description VDSD-10A VDSD-16A Q gpm (l/min) 13 (50) 34 (130) P psi (bar) 5000 (350) 5000 (350) Cavity CA-10A-3N CA-16A-3N Page 148 149
Spool type, direct acting, external pilot, internal drain Scheme Cartridge description VDSH-10A Q gpm (l/min) 11 (40) P psi (bar) 5000 (350) Cavity CA-10A-4N Page 150
17
Rev. 02.08
Spool type, direct acting, external pilot, external vent Scheme Cartridge description VDSJ-16A Q gpm (l/min) 34 (130) P psi (bar) 5000 (350) Cavity CA-16A-4N Page 152
Flow and pressure control, with internal pilot Scheme Cartridge description VLSP-10A Q gpm (l/min) 16 (60) P psi (bar) 5000 (350) Cavity CA-10A-3C Page 157
18
Rev. 02.08
Flow and pressure control, with internal pilot Scheme Cartridge description VLSP-16A Q gpm (l/min) 53 (200) P psi (bar) 5000 (350) Cavity CA-16A-3C Page 159
Flow control, with external pilot Scheme Cartridge description VLSC-10A VLSC-16A VLSC-20A Q gpm (l/min) 8 (30) 32 (120) 63 (240) P psi (bar) 5000 (350) 5000 (350) 5000 (350) Cavity CA-10A-3C CA-16A-3C CA-20A-3C Page 161 162 163
Pressure control, with internal pilot Scheme Cartridge description VLSR-10A Q gpm (l/min) 11 (40) P psi (bar) 5000 (350) Cavity CA-10A-3C Page 164
19
Rev. 02.08
Pressure compensator Scheme Cartridge description VLSQ-10A VLSQ-12A VLSQ-16A Q gpm (l/min) 11 (40) 18 (70) 21 (80) P psi (bar) 5000 (350) 5000 (350) 5000 (350) Cavity CA-10A-3N CA-12A-3N CA-16A-3N Page 168 169 170
Pressure compensator, combination type Scheme Cartridge description VCSQ-10A VCSQ-12A VCSQ-16A Q gpm (l/min) 16 (60) 32 (120) 53 (200) P psi (bar) 5000 (350) 5000 (350) 5000 (350) Cavity CA-10A-4N CA-12A-4N CA-16A-4N Page 171 172 173
Pressure compensator Scheme Cartridge description VRLA-12A-S VRLA-16A-S VRLA-20A-S Q gpm (l/min) 26 (100) 42 (160) 60 (230) P psi (bar) 5000 (350) 5000 (350) 5000 (350) Cavity CA-12A-4N CA-16A-4N CA-20A-4N Page 174 175 176
Scheme
20
Rev. 02.08
Special
Accessories, hand pump Scheme Cartridge description PM-06 Q gpm (l/min) P psi (bar) 3000 (210) Cavity CA-08A-2N Page 181
Hose burst Scheme Cartridge description VPN1 Q gpm (l/min) P psi (bar) 4500 (315) Cavity Page 293
21
Rev. 02.08
VED-8I-2B-01-NC
0.4 (1.5)
5000 (350)
CA-08A-2N
S8-356
200
Double lock, Normally Closed Scheme Cartridge description VED-8I-2T-06-NC VED-7A-2T-06-NC Q gpm (l/min) 4 (15) 7 (25) P psi (bar) 3000 (210) 3000 (210) Cavity CA-08A-2N CA-08A-2N Coil S8-356 S7 Page 211 212
Poppet style, Normally Open Scheme Cartridge description VED-8I-2A-01-NA Q gpm (l/min) 0.4 (1.5) P psi (bar) 5000 (350) Cavity CA-08A-2N Coil S8-356 Page 223
VED-8I-2B-01-NA
0.4 (1.5)
5000 (350)
CA-08A-2N
S8-356
231
22
Rev. 02.08
VED-8I-32-06-SI VED-7I-32-09-SI
3 (10) 6 (20)
CA-08A-3N CA-10A-3N
S8-356 S7
246 247
Spool style, Normally Closed Scheme Cartridge description VED-8I-32-06-NC VED-7I-32-09-NC Q gpm (l/min) 3 (10) 6 (20) P psi (bar) 3000 (210) 3000 (210) Cavity CA-08A-3N CA-10A-3N Coil S8-356 S7 Page 248 249
Spool style, Normally Open Scheme Cartridge description VED-8I-32-06-NA VED-7I-32-09-NA Q gpm (l/min) 3 (10) 6 (20) P psi (bar) 3000 (210) 3000 (210) Cavity CA-08A-3N CA-10A-3N Coil S8-356 S7 Page 250 251
23
Rev. 02.08
Spool style, Open Centre Scheme Cartridge description VED-8I-42-06-CA VED-7I-42-09-CA Q gpm (l/min) 3 (10) 6 (20) P psi (bar) 3000 (210) 3000 (210) Cavity CA-08A-4N CA-10A-4N Coil S8-356 S7 Page 252 253
Spool style, Motor Spool Scheme Cartridge description VED-8I-43-06-ABT VED-7I-43-09-ABT Q gpm (l/min) 3 (10) 6 (20) P psi (bar) 3000 (210) 3000 (210) Cavity CA-08A-4N CA-10A-4N Coil S8-356 S7 Page 258 259
24
Rev. 02.08
Poppet style, Normally Closed - Reverse Flow Energized Scheme Cartridge description VEI-8A-2A-06-NC-S-NSS VEI-8A-2A-06-NC-S-ET-NSS VEI-8A-2A-10A-NC-S-NSS VEI-8A-2A-12A-NC-S-NSS VEI-8A-2A-16A-NC-S-NSS VEI-7A-2A-16A-NC-S Q gpm (l/min) 11 (40) 11 (40) 19 (70) 39 (150) 39 (150) 52 (200) P psi (bar) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) Cavity CA-08A-2N CA-08A-2N CA-10A-2N CA-12A-2N CA-16A-2N CA-16A-2N Coil S8-356 S8-356 S8-356 S8-356 S8-356 S7 Page 189 190 193 195 197 198
Poppet style, Normally Closed - Reverse Flow Energized - Extra Spring Scheme Cartridge description VEI-8A-2A-06-NC-S-X VEI-8A-2A-10A-NC-S-X-NSS VEI-8A-2A-12A-NC-S-X-NSS VEI-7A-2A-16A-NC-S-X Q gpm (l/min) 11 (40) 19 (70) 39 (150) 52 (200) P psi (bar) 5000 (350) 5000 (350) 5000 (350) 5000 (350) Cavity CA-08A-2N CA-10A-2N CA-12A-2N CA-16A-2N Coil S8-356 S8-356 S8-356 S7 Page 191 194 196 199
Poppet style, Normally Closed - Internal Reverse Check valve Scheme Cartridge description VEI-8A-2A-06-NC-VU-S1-NSS Q gpm (l/min) 11 (40) P psi (bar) 5000 (350) Cavity 019-E Coil S8-356 Page 192
25
Rev. 02.08
Poppet style, Normally Closed - Reverse Flow Energized - Extra Spring - Nose-in, Side-out Operation Scheme Cartridge description VEI-8A-2B-06-NC-S-X VEI-8A-2B-10A-NC-S-X-NSS VEI-8A-2B-12A-NC-S-X-NSS VEI-7A-2B-16A-NC-S-X Q gpm (l/min) 11 (40) 19 (70) 39 (150) 52 (200) P psi (bar) 5000 (350) 5000 (350) 5000 (350) 5000 (350) Cavity CA-08A-2N CA-10A-2N CA-12A-2N CA-16A-2N Coil S8-356 S8-356 S8-356 S7 Page 202 204 206 208
Double Lock, Normally Closed Scheme Cartridge description VEI-8A-2T-06-NC-S-NSS VEI-8A-2T-06-NC-S-ET-NSS VEI-8A-2T-10A-NC-S-NSS VEI-8A-2T-12A-NC-S-NSS VEI-8A-2T-16A-NC-S-NSS VEI-7A-2T-16A-NC-S Q gpm (l/min) 11 (40) 11 (40) 19 (70) 39 (150) 39 (150) 52 (200) P psi (bar) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) Cavity CA-08A-2N CA-08A-2N CA-10A-2N CA-12A-2N CA-16A-2N CA-16A-2N Coil S8-356 S8-356 S8-356 S8-356 S8-356 S7 Page 213 214 216 218 220 221
Double Lock, Normally Closed, Extra Spring Scheme Cartridge description VEI-8A-2T-06-NC-S-X VEI-8A-2T-10A-NC-S-X-NSS VEI-8A-2T-12A-NC-S-X-NSS VEI-7A-2T-16A-NC-S-X Q gpm (l/min) 11 (40) 19 (70) 39 (150) 52 (200) P psi (bar) 5000 (350) 5000 (350) 5000 (350) 5000 (350) Cavity CA-08A-2N CA-10A-2N CA-12A-2N CA-16A-2N Coil S8-356 S8-356 S8-356 S7 Page 215 217 219 222
26
Rev. 02.08
Poppet style, Normally Open - Reverse Flow De-energized Scheme Cartridge description VEI-8A-2A-06-NA-S-NSS VEI-8A-2A-10A-NA-S-NSS VEI-8A-2A-12A-NA-S-NSS VEI-8A-2A-16A-NA-S-NSS VEI-7A-2A-16A-NA-S Q gpm (l/min) 11 (40) 19 (70) 39 (150) 39 (150) 52 (200) P psi (bar) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) Cavity CA-08A-2N CA-10A-2N CA-12A-2N CA-16A-2N CA-16A-2N Coil S8-356 S8-356 S8-356 S8-356 S7 Page 225 227 228 229 230
Poppet style, Normally Open - Internal Reverse Check valve Scheme Cartridge description VEI-8A-2A-06-NA-VU-S1-NSS Q gpm (l/min) 11 (40) P psi (bar) 5000 (350) Cavity 019-E Coil S8-356 Page 226
27
Rev. 02.08
Double Lock, Normally Open Scheme Cartridge description VEI-8A-2T-06-NA-S-NSS VEI-8A-2T-10A-NA-S-NSS VEI-8A-2T-12A-NA-S-NSS VEI-8A-2T-16A-NA-S-NSS VEI-7A-2T-16A-NA-S Q gpm (l/min) 11 (40) 19 (70) 39 (150) 39 (150) 52 (200) P psi (bar) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) Cavity CA-08A-2N CA-10A-2N CA-12A-2N CA-16A-2N CA-16A-2N Coil S8-356 S8-356 S8-356 S8-356 S7 Page 238 239 240 241 242
28
Rev. 02.08
Pilot operated relief Scheme Cartridge description VEP-5B-2S-10A-P VEP-5B-2S-P Q gpm (l/min) 32 (120) 39 (150) P psi (bar) 5000 (350) 5000 (350) Cavity CA-10A-2N 065 Coil S5 S5 Page 263 264
Direct acting, Pressure reducing Scheme Cartridge description VEP-5A-3R-06 Q gpm (l/min) 3 (10) P psi (bar) 3000 (210) Cavity CA-10A-3N Coil S5 Page 265
Pilot operated, Pressure reducing Scheme Cartridge description VEP-5A-2R-06-P Q gpm (l/min) 21 (80) P psi (bar) 3600 (250) Cavity CA-10A-3N Coil S5 Page 266
29
Rev. 02.08
Non Compensated Flow Regulators Scheme Cartridge description VEP-5A-2Q-09-NC-2F VEP-5A-2Q-09-NC-4F VEP-5A-2Q-09-NC-6F VEP-5A-2Q-12A-NC-6F Q gpm (l/min) 6 (20) 8 (30) 11 (40) 19 (70) P psi (bar) 3000 (210) 3000 (210) 3000 (210) 3000 (210) Cavity CA-10A-3N CA-10A-3N CA-10A-3N CA-12A-3N Coil S5 S5 S5 S5 Page 268 269 270 271
Non Compensated Flow Regulators Scheme Cartridge description VEP-5A-2Q-09-NA-2F VEP-5A-2Q-09-NA-4F VEP-5A-2Q-09-NA-6F Q gpm (l/min) 6 (20) 8 (30) 11 (40) P psi (bar) 3000 (210) 3000 (210) 3000 (210) Cavity CA-10A-3N CA-10A-3N CA-10A-3N Coil S5 S5 S5 Page 272 273 274
30
Rev. 02.08
Mechanical cartridges
31
RELIEF, DIRECT ACTING POPPET TYPE RELIEF, DIRECT ACTING POPPET TYPE SUN CAVITY INTERCHANGE SUN CAVITY INTERCHANGE
VS-5-CN-T8A
04.11.58 - X - 87 - Z
TECHNICAL DATA
Max. pressure: Max. flow: Cavity : SUN T-8A Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the poppet from its seat and allowing relief flow through 2 to tank. Pressure at 2 is additive to the relief setting of the valve. The cartridge is suitable only for pilot or thermal relief applications. 25-30 ft-lb 0.117 lbs (34-41Nm) (0.053 Kg) 5000 psi 0.5 gpm (350 bar) (2 l/min)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20 35 46
SPRINGS
Adj. press. range psi (bar) 350-1450 (25-100) 1450-2900 (100-200) 2900-5000 (200-350) 5000-6600 (350-460) Press. increase psi / turn (bar/turn) 580 (40) 1044 (72) 2378 (164) 3248 (224) Std. setting cracking pressure psi (bar) 1450 (100) 2900 (200) 5000 (350) 5000 (350) Ordering code
OPTIONS
Description
11.04.31.001
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
33
RELIEF, DIRECT ACTING POPPET TYPE RELIEF, DIRECT ACTING POPPET TYPE SPECIAL CAVITY SPECIAL CAVITY
VS-5-CN VS-5-CN
TECHNICAL DATA
Max. pressure: Max. flow: 6600 psi 0.4 gpm (460 bar) (1.5 l/min)
Special Cavity : 348 (see page CT.S.001.U) Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the poppet from its seat and allowing relief flow through 2 to tank. Pressure at 2 is additive to the relief setting of the valve. The cartridge is suitable only for pilot or thermal relief applications. 20-24 ft-lb 0.110 lbs (27-33 Nm) (0.050 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20 35 46
SPRINGS
Adj. press. range psi (bar) 350-1450 (25-100) 1450-2900 (100-200) 2900-5000 (200-350) 5000-6600 (350-460) Press. increase psi / turn (bar/turn) 590 (40.7) 1059 (73) 2422 (167) 3306 (228) Std. setting cracking pressure psi (bar) 1450 (100) 2900 (200) 5000 (350) 5000 (350) Ordering code
OPTIONS
Description
11.04.31.001
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
Rev. 0208
34
AS1.010
RELIEF, DIRECT ACTING POPPET TYPE RELIEF, DIRECT ACTING POPPET TYPE SUN CAVITY INTERCHANGE SUN CAVITY INTERCHANGE
VS-5-CF-T8A
T-8A
04.11.57 - X - 87 - Z
TECHNICAL DATA
Max. pressure: Max. flow: Cavity : SUN T-8A Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the poppet from its seat and allowing relief flow through 2 to tank. Pressure at 2 is additive to the relief setting of the valve. The cartridge is suitable only for pilot or thermal relief applications. 25-30 ft-lb 0.117 lbs (34-41Nm) (0.053 Kg) 5000 psi 0.5 gpm (350 bar) (2 l/min)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20 35 46
SPRINGS
Adj. press. range psi (bar) 350-1450 (25-100) 1450-2900 (100-200) 2900-5000 (200-350) 5000-6600 (350-460) Press. increase psi / turn (bar/turn) 580 (40) 1044 (72) 2378 (164) 3248 (224) Std. setting cracking pressure psi (bar) 1450 (100) 2900 (200) 5000 (350) 5000 (350) Ordering code
OPTIONS
Description
11.04.31.001
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
35
RELIEF, DIRECT ACTING POPPET TYPE RELIEF, DIRECT ACTING POPPET TYPE SPECIAL CAVITY SPECIAL CAVITY
VS-5-CF VS-5-CF
TECHNICAL DATA
Max. pressure: Max. flow: 6600 psi 0.4 gpm (460 bar) (1.5 l/min)
Special Cavity : 348 (see page CT.S.001.U) Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the poppet from its seat and allowing relief flow through 2 to tank. Pressure at 2 is additive to the relief setting of the valve. The cartridge is suitable only for pilot or thermal relief applications. 20-24 ft-lb 0.110 lbs (27-33 Nm) (0.050 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20 35 46
SPRINGS
Adj. press. range psi (bar) 350-1450 (25-100) 1450-2900 (100-200) 2900-5000 (200-350) 5000-6600 (350-460) Press. increase psi / turn (bar/turn) 590 (40.7) 1059 (73) 2422 (167) 3306 (228) Std. setting cracking pressure psi (bar) 1450 (100) 2900 (200) 5000 (350) 5000 (350) Ordering code
OPTIONS
Description
11.04.31.001
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
Rev. 0208
36
AS1.020
RELIEF, DIRECT ACTING POPPET TYPE RELIEF, DIRECT ACTING POPPET TYPE COMMON CAVITY COMMON CAVITY
VSAN-08A
SIZE 08 VSAN-08A
04.11.48 - X - 56 08 SIZE - Z
04.11.48 - X - 56 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 6000 psi 1 gpm (420 bar) (3 l/min)
Cavity : CA-08A-2N (see page CT.A.001.U) Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the poppet from its seat and allowing relief flow through port 2 to tank. Pressure at port 2 is additive to the relief setting of the valve. The cartridge is especially suited for pilot or thermal relief applications. 25-30 ft-lb 0.309 lbs (34-41 Nm) (0.140 Kg)
X
03 04 73 SPRINGS
Adj. press. range psi (bar) 500-2000 (35-140) 1500-3000 (105-210) 2000-6000 (140-420) 500-5000 (35-350) 500-5000 (35-350) Press. increase Standard setting psi / turn psi (bar) (bar/turn) (Q=1 l/min) 696 1450 (48) (100) 1276 2900 (88) (200) 2030 5000 (140) (350) 986 (68) 986 (68) 5000 (350) 5000 (350)
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 X = 03 20 35
OPTIONS
Ordering code Description
11.04.23.002
Tamper resistant cap
X = 04 35 X = 73 35
Rev.0208
Special settings available. Contact factory authorized representative for ordering code.
37
AA1.010
RELIEF, DIRECT ACTING GUIDED POPPET TYPE RELIEF, DIRECT ACTING GUIDED POPPET TYPE COMMON CAVITY COMMON CAVITY
VSBN-08A VSBN-08A
SIZE 08 SIZE 08
04.11.49 - XX - 56 -Z 04.11.49 - - 56 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 5 gpm (350 bar) (20 l/min)
Cavity : CA-08A-2N (see page CT.A.001.U) Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the poppet from its seat and allowing relief flow through port 2 to tank. Pressure at port 2 is additive to the relief setting of the valve. The unique Oil Control poppet design provides enhanced stability at all flows and pressures. 25-30 ft-lb 0.309 lbs (34-41 Nm) (0.140 Kg)
X
03 04 73 SPRINGS
Adj. press. range psi (bar) 145-1000 (10-70) 500-2000 (35-140) 1500-3000 (105-210) 2500-5000 (175-350) 500-5000 (35-350) 500-5000 (35-350) Press. increase Standard setting psi / turn psi (bar) (bar/turn) (Q=5 l/min) 375 725 (26) (50) 725 1450 (50) (100) 1145 2900 (79) (200) 2465 5000 (170) (350) 1044 2900 (72) (200) 1044 2900 (72) (200)
ADJUSTMENTS
Leakproof hex. socket screw
Z
05 X = 03 10 20 35 X = 04 35 X = 73 35
Rev.0208
OPTIONS
Ordering code Description
X = 03 11.04.23.002 X = 73 11.04.23.004
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
38
AA1.020
RELIEF, DIRECT ACTING GUIDED POPPET TYPE RELIEF, DIRECT ACTING GUIDED POPPET TYPE HYDAC CAVITY INTERCHANGE HYDAC CAVITY INTERCHANGE
VSBN-08F
06020
04.11.49 - X - 20 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 5 gpm (350 bar) (20 l/min)
Cavity : HYDAC 06020 Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the poppet from its seat and allowing relief flow through port 2 to tank. Pressure at port 2 is additive to the relief setting of the valve. The unique Oil Control poppet design provides enhanced stability at all flows and pressures. 20-22 ft-lb 0.309 lbs (27-30 Nm) (0.140 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
05 10 20 35
SPRINGS
Adj. press. range psi (bar) 145-1015 (10-70) 500-2000 (35-140) 1500-3000 (105-210) 2500-5000 (175-350) Press. increase psi / turn (bar/turn) 377 (26) 725 (50) 1146 (79) 2465 (170) Standard setting psi (bar) (Q=5 l/min) 725 (50) 1450 (100) 2900 (200) 5000 (350)
OPTIONS
Ordering code Description
11.04.23.002
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
39
AF1.010
RELIEF, DIRECT ACTING GUIDED POPPET TYPE RELIEF, DIRECT ACTING GUIDED POPPET TYPE COMMON CAVITY COMMON CAVITY
VSBN-10A VSBN-10A
SIZE 10 SIZE 10
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 13 gpm (350 bar) (50 l/min)
Cavity : CA-10A-2N (see page CT.A.001.U) Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the poppet from its seat and allowing relief flow through port 2 to tank. Pressure at port 2 is additive to the relief setting of the valve. The unique Oil Control poppet design provides enhanced stability at all flows and pressures. 30-35 ft-lb 0.430 lbs (41-47 Nm) (0.195 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
05 10 20 35
Rev.0208
SPRINGS
Adj. press. range psi (bar) 75-1000 (5-70) 500-2000 (35-140) 1500-3000 (105-210) 2500-5000 (175-350) Press. increase psi / turn (bar/turn) 232 (16) 348 (24) 783 (54) 1218 (84) Standard setting psi (bar) (Q=5 l/min) 725 (50) 1450 (100) 2900 (200) 5000 (350)
OPTIONS
Ordering code Description
11.04.23.002
Special settings available. Contact factory authorized representative for ordering code.
40
AA1.030
RELIEF, DIRECT ACTING GUIDED POPPET TYPE RELIEF, DIRECT ACTING GUIDED POPPET TYPE COMMON CAVITY COMMON CAVITY
VSBG-10A
SIZE 10
04.11.56 - X - 85 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 13 gpm (350 bar) (50 l/min)
Cavity : CA-10A-2N (see page CT.A.001.U) Installation torque : Weight: Flow is blocked from 2 to 1 until pressure increases to meet the selected valve setting, lifting the poppet from its seat and allowing relief flow through port 1 to tank. Pressure at port 1 is additive to the relief setting of the valve. The unique Oil Control poppet design provides enhanced stability at all flows and pressures. 30-35 ft-lb 0.430 lbs (41-47 Nm) (0.195 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
05 10 20 35
Rev.0208
SPRINGS
Adj. press. range psi (bar) 75-1000 (5-70) 500-2000 (35-140) 1500-3000 (105-210) 2500-5000 (175-350) Press. increase psi / turn (bar/turn) 232 (16) 348 (24) 783 (54) 1218 (84) Standard setting psi (bar) (Q=5 l/min) 725 (50) 1450 (100) 2900 (200) 5000 (350)
OPTIONS
Ordering code Description
11.04.23.002
Special settings available. Contact factory authorized representative for ordering code.
41
AA1.040
RELIEF, DIRECT ACTING POPPET TYPE RELIEF, DIRECT ACTING POPPET TYPE DIFFERENTIAL AREA DIFFERENTIAL AREA COMMON CAVITY COMMON CAVITY
VSDN-08A VSDN-08A
SIZE 08 SIZE 08
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 13 gpm (350 bar) (50 l/min)
Cavity : CA-08A-2N (see page CT.A.001.U) Installation torque : Weight: Flow is blocked from 2 to 1 until pressure increases to meet the selected valve setting, lifting the poppet from its seat and allowing relief flow through port 1 to tank. Pressure at port 1 is additive to the relief setting of the valve. The unique Oil Control poppet design provides enhanced stability at all flows and pressures. 25-30 ft-lb 0.331 lbs (34-41 Nm) (0.150 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20 35
Rev.0208
SPRINGS
Adj. press. range psi (bar) 500-2000 (35-140) 1500-3000 (105-210) 2500-4500 (175-315) Press. increase psi / turn (bar/turn) 464 (32) 1102 (76) 1711 (118) Standard setting psi (bar) (Q=5 l/min) 1450 (100) 2900 (200) 4350 (300)
OPTIONS
Ordering code Description
11.04.23.002
Special settings available. Contact factory authorized representative for ordering code.
42
RELIEF, DIRECT ACTING POPPET TYPE RELIEF, DIRECT ACTING POPPET TYPE DIFFERENTIAL AREA DIFFERENTIAL AREA COMMON CAVITY COMMON CAVITY
VSDN-10A
SIZE 10
04.15.23 - X - 85 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 32 gpm (350 bar) (120 l/min)
Cavity : CA-10A-2N (see page CT.A.001.U) Installation torque : Weight: Flow is blocked from 2 to 1 until pressure increases to meet the selected valve setting, lifting the poppet from its seat and allowing relief flow through port 1 to tank. Pressure at port 1 is additive to the relief setting of the valve. The unique Oil Control poppet design provides enhanced stability at all flows and pressures. 30-35 ft-lb 0.441 lbs (41-47 Nm) (0.200 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 35
SPRINGS
Adj. press. range psi (bar) 500-2000 (35-140) 1450-5000 (100-350) Press. increase psi / turn (bar/turn) 667 (46) 1247 (86) Standard setting psi (bar) (Q=5 l/min) 1450 (100) 5000 (350)
OPTIONS
Ordering code Description
11.04.23.002
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
43
RELIEF, DIRECT ACTING POPPET TYPE RELIEF, DIRECT ACTING POPPET TYPE DIFFERENTIAL AREA DIFFERENTIAL AREA SPECIAL CAVITY SPECIAL CAVITY
VSD-250 VSD-250
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 63 gpm (350 bar) (240 l/min)
Special cavity : 003 (see page CT.S.001.U) Installation torque : Weight: Flow is blocked from 2 to 1 until pressure increases to meet the selected valve setting, lifting the poppet from its seat and allowing relief flow through 1 to tank. Pressure at 1 is additive to the relief setting of the valve. The combination of stable poppet design and hardened seat provide excellent response, hysteresis and leakage characteristics. 154-173 ft-lb 2.205 lbs (208-234 Nm) (1.000 Kg)
X
03
ADJUSTMENTS
Leakproof inner hex. socket screw
Z
10 20 35
SPRINGS
Adj. press. range psi (bar) 500-1450 (35-100) 1000-3000 (70-210) 1750-5000 (120-350) Press. increase psi / turn (bar/turn) 261 (18) 522 (36) 899 (62) Standard setting psi (bar) (Q=5 l/min) 1450 (100) 2900 (200) 5000 (350) Ordering code 03.51.01.068 03.51.01.067 03.51.01.057 Color blue green yellow Ordering code
OPTIONS
Description
03.05.01.005
Sealing cap
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
44
Page. AS1.090
RELIEF, DIRECT ACTING POPPET TYPE RELIEF, DIRECT ACTING POPPET TYPE DIFFERENTIAL AREA DIFFERENTIAL AREA SPECIAL CAVITY SPECIAL CAVITY
VSD-350
04.15.04 - X - 99 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 3000 psi 93 gpm (210 bar) (350 l/min)
Special cavity : 004 (see page CT.S.001.U) Installation torque : Weight: Flow is blocked from 2 to 1 until pressure increases to meet the selected valve setting, lifting the poppet from its seat and allowing relief flow through 1 to tank. Pressure at 1 is additive to the relief setting of the valve. The combination of stable poppet design and hardened seat provide excellent response, hysteresis and leakage characteristics. 181-196 ft-lb 3.263 lbs (245-265 Nm) (1.480 Kg)
X
03
ADJUSTMENTS
Leakproof inner hex. socket screw
Z
05 20
SPRINGS
Adj. press. range psi (bar) 220-725 (15-50) 1160-3000 (80-210) Press. increase psi / turn (bar/turn) 131 (9) 537 (37) Standard setting psi (bar) (Q=5 l/min) 725 (50) 2900 (200) Ordering code 03.51.01.065 03.51.01.044 Color black green
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
45
Page. AS1.100
RELIEF, BI-DIRECTIONAL RELIEF, BI-DIRECTIONAL DIRECT ACTING POPPET TYPE DIFFERENTIAL AREA DIRECT ACTING POPPET TYPE DIFFERENTIAL AREA COMMON CAVITY COMMON CAVITY
VSNG-10A
SIZE 10
04.11.59 - X - 85 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 15 gpm (350 bar) (56 l/min)
Cavity : CA-10A-2N (see page CT.A.001.U) Installation torque : Weight: Flow is blocked bi-directionally between 1 and 2 until pressure at either port increases to meet the selected valve setting, lifting the poppet from its seat and allowing relief flow to the opposite port. The unique Oil Control poppet design provides consistent cracking pressures at both ports and enhanced stability at all flows and pressures. Maximum difference for crack pressure in both direction : 145 psi (10 bar) 30-35 ft-lb 0.551 lbs (41-47 Nm) (0.250 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20
SPRINGS
Adj. press. range psi (bar) Press. increase psi / turn (bar/turn) Standard setting psi (bar) (Q=5 l/min)
Rev.0208
46
AA1.042
RELIEF, PILOT OPERATED RELIEF, TYPE OPERATED SPOOL TYPE SPOOL PILOT COMMON CAVITY COMMON CAVITY
VSPN-10A
SIZE 10
04.12.08 - X - 85 - Z
TECHNICAL DATA
Max. pressure: Max. flow: Int. leakage ave. : 6000 psi 32 gpm 2900 psi 3 12 in /min (420 bar) (120 l/min) (200 bar) 3 (200 cm /min)
Cavity : CA-10A-2N (see page CT.A.001.U) Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the conical, pilot-stage poppet from its seat. This action exhausts oil above the main-stage piston (spool type), allowing it to shift and provide relief flow through 2 to tank. Pressure at 2 is additive to the relief setting of the valve. 30-35 ft-lb 0.463 lbs (41-47 Nm) (0.210 Kg)
X
03 04
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 X = 03 20 35
SPRINGS
Adj. press. range psi (bar) 500-2000 (35-140) 1000-4000 (70-280) 2000-6000 (140-420) Press. increase Standard setting psi / turn psi (bar) (bar/turn) (Q=5 l/min) 696 1450 (48) (100) 1276 2900 (88) (200) 2030 5000 (140) (350) Ordering code
OPTIONS
Description
11.04.23.002
Tamper resistant cap
X = 04 35
Rev.0208
500-5000 (35-350)
986 (68)
5000 (350)
Special settings available. Contact factory authorized representative for ordering code.
47
Page. AA1.050
RELIEF, PILOT OPERATED SPOOL TYPE RELIEF, PILOT OPERATED SPOOL TYPE COMMON CAVITY COMMON CAVITY
VSPN-12A VSPN-12A
SIZE 12 SIZE 12
04.12.10 - XX - 57 - Z 04.12.10 - - 57 - Z
TECHNICAL DATA
Max. pressure: Max. flow: Int. leakage ave. : 5000 psi 53 gpm 2900 psi 3 21 in /min (350 bar) (200 l/min) (200 bar) 3 (350 cm /min)
Cavity : CA-12A-2N (see page CT.A.001.U) Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the conical, pilot-stage poppet from its seat. This action exhausts oil above the main-stage piston (spool type), allowing it to shift and provide relief flow through 2 to tank. Pressure at 2 is additive to the relief setting of the valve. 60-70 ft-lb 0.507 lbs (81-95 Nm) (0.230 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20 35
SPRINGS
Adj. press. range psi (bar) 500-2000 (35-140) 1000-4000 (70-280) 2000-6000 (140-420) Press. increase Standard setting psi / turn psi (bar) (bar/turn) (Q=5 l/min) 696 1450 (48) (100) 1276 2900 (88) (200) 2030 5000 (140) (350) Ordering code
OPTIONS
Description
11.04.23.002
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
48
RELIEF, PILOT OPERATED SPOOL TYPE RELIEF, PILOT OPERATED SPOOL TYPE COMMON CAVITY COMMON CAVITY
VSPN-16A
SIZE 16
04.12.07 - X - 27 - Z
TECHNICAL DATA
Max. pressure: Max. flow: Int. leakage ave. : 6000 psi 79 gpm 2900 psi 3 21 in /min (420 bar) (300 l/min) (200 bar) 3 (350 cm /min)
Cavity : CA-16A-2N (see page CT.A.001.U) Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the conical, pilot-stage poppet from its seat. This action exhausts oil above the main-stage piston (spool type), allowing it to shift and provide relief flow through 2 to tank. Pressure at 2 is additive to the relief setting of the valve. Pilot operation is protected from contamination by a filter screen at the bottom of the main piston. 80-90 ft-lb 1.587 lbs (108-122 Nm) (0.720 Kg)
X
03 04
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20 35
SPRINGS
Adj. press. range psi (bar) 500-2000 (35-140) 1000-4000 (70-280) 2000-6000 (140-420) Press. increase psi / turn (bar/turn) Standard setting psi (bar) (Q=5 l/min) 1450 (100) 2900 (200) 5000 (350) Ordering code
OPTIONS
Description
X=03 X=04
696 (48) 1276 (88) 2030 (140) 551 (38) 1015 (70) 1595 (110)
11.04.23.002
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
49
Page. AA1.060
RELIEF, PILOT OPERATED POPPET TYPE RELIEF, PILOT OPERATED POPPET TYPE COMMON CAVITY COMMON CAVITY
VSPC-10A
SIZE 10
04.12.09 - X - 85 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 21 gpm (350 bar) (80 l/min)
Cavity : CA-10A-2N (see page CT.A.001.U) Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the conical, pilot-stage poppet from its seat. This action exhausts oil above the main-stage poppet (low-leakage, seat type), allowing it to shift and provide relief flow through 2 to tank. Pressure at 2 is additive to the relief setting of the valve. 30-35 ft-lb 0.463 lbs (41-47 Nm) (0.210 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20 35
Rev.0208
SPRINGS
Adj. press. range psi (bar) 500-2000 (35-140) 1000-4000 (70-280) 2000-5000 (140-350) Press. increase psi / turn (bar/turn) 696 (48) 1276 (88) 2030 (140) Standard setting psi (bar) (Q=5 l/min) 1450 (100) 2900 (200) 5000 (350)
OPTIONS
Ordering code Description
11.04.23.002
Special settings available. Contact factory authorized representative for ordering code.
50
Page. AA1.065
RELIEF, PILOT OPERATED RELIEF, TYPE OPERATED SPOOL TYPE SPOOL PILOT EXTERNAL DRAIN EXTERNAL DRAIN COMMON CAVITY COMMON CAVITY
VSPY-10A
SIZE 10
04.13.05 - X - 85 - Z
TECHNICAL DATA
Max. pressure: Max. flow: Int. leakage ave. : 6000 psi 32 gpm 2900 psi 3 12 in /min (420 bar) (120 l/min) (200 bar) 3 (200 cm /min)
Cavity : CA-10A-3N (see page CT.A.003.U) Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the conical, pilot-stage poppet from its seat. This action exhausts oil above the main-stage piston (spool type), allowing it to shift and provide relief flow through 2 to tank. The spring chamber is drained to tank at 3 allowing a consistent relief setting independent of back-pressure at 2. 30-35 ft-lb 0.463 lbs (41-47 Nm) (0.210 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20 35
SPRINGS
Adj. press. range psi (bar) 500-2000 (35-140) 1000-4000 (70-280) 2000-6000 (140-420) Press. increase psi / turn (bar/turn) 696 (48) 1276 (88) 2030 (140) Standard setting psi (bar) (Q=5 l/min) 1450 (100) 2900 (200) 5000 (350) Ordering code
OPTIONS
Description
11.04.23.002
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
51
Page. AA1.070
RELIEF, PILOT OPERATED SPOOL TYPE RELIEF, PILOT OPERATED SPOOL TYPE EXTERNAL DRAIN EXTERNAL DRAIN COMMON CAVITY COMMON CAVITY
VSPY-12A VSPY-12A
SIZE 12 SIZE 12
TECHNICAL DATA
Max. pressure: Max. flow: Int. leakage ave. : 5000 psi 53 gpm 2900 psi 3 21 in /min (350 bar) (200 l/min) (200 bar) 3 (350 cm /min)
Cavity : CA-12A-3N (see page CT.A.003.U) Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the conical, pilot-stage poppet from its seat. This action exhausts oil above the main-stage piston (spool type), allowing it to shift and provide relief flow through 2 to tank. The spring chamber is drained to tank at 3 allowing a consistent relief setting independent of back-pressure at 2. 60-70 ft-lb 0.661 lbs (81-95 Nm) (0.300 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20 35
SPRINGS
Adj. press. range psi (bar) 500-2000 (35-140) 1000-4000 (70-280) 2000-6000 (140-420) Press. increase psi / turn (bar/turn) 696 (48) 1276 (88) 2030 (140) Standard setting psi (bar) (Q=5 l/min) 1450 (100) 2900 (200) 5000 (350) Ordering code
OPTIONS
Description
11.04.23.002
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
52
RELIEF, PILOT OPERATED RELIEF, TYPE OPERATED SPOOL TYPE SPOOL PILOT EXTERNAL PILOT EXTERNAL PILOT COMMON CAVITY COMMON CAVITY
VSPX-12A
SIZE 12
04.13.08 - X - 57 - Z
TECHNICAL DATA
Max. pressure: Max. flow: Int. leakage ave. : 5000 psi 53 gpm 2900 psi 3 21 in /min (350 bar) (200 l/min) (200 bar) 3 (350 cm /min)
Cavity : CA-12A-2N (see page CT.A.001.U) Installation torque : Weight: Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the conical, pilot-stage poppet from its seat. This action exhausts oil above the main-stage piston (spool type), allowing it to shift and provide relief flow through 2 to tank. Pressure at 2 is additive to the relief setting of the valve. With port 3 fully drained to tank, the minimum relief setting of 30 psi (2 bar) is attained. To use the remote control feature, pressure at 3 may be varied externally in control of the main relief setting up to the selected maximum spring adjustment. 60-70 ft-lb 0.661 lbs (81-95 Nm) (0.300 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20 35
SPRINGS
Adj. press. range psi (bar) 500-2000 (35-140) 1000-4000 (70-280) 2000-6000 (140-420) Press. increase Standard setting psi / turn psi (bar) (bar/turn) (Q=5 l/min) 696 1450 (48) (100) 1276 2900 (88) (200) 2030 5000 (140) (350) Ordering code
OPTIONS
Description
11.04.23.002
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
53
PRIORITY UNLOADING PILOT OPERATED PRIORITY UNLOADING PILOT OPERATED COMMON CAVITY COMMON CAVITY
VMSN-08A VMSN-08A
SIZE 08 SIZE 08
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 1 gpm (350 bar) (3 l/min)
Cavity : CA-08A-3N (see page CT.A.003.U) Installation torque : Weight: Flow is blocked from 2 to 3 until pressure increases to meet the selected valve setting, lifting the small, pilot-stage poppet from its seat. This action exhausts oil above the main-stage piston (spool type), allowing it to shift fully and unload flow from 2 through 3 with minimal pressure drop. Similarly, when remote pilot pressure at 1 exceeds the pressure setting, a secondary piston lifts the pilot-stage poppet from its seat, again exhausting fluid from 2 through 3. 25-30 ft-lb 0.309 lbs (34-41 Nm) (0.140 Kg)
X
06
Z
03 05 10 20 35
Rev.0208
SPRINGS
Adj. press. range psi (bar) 290-580 (20-40) 500-1000 (35-70) 1000-2000 (70-140) 1500-3000 (105-210) 2500-5000 (175-350) Standard setting psi (bar) (Q=1 l/min) 435 (30) 725 (50) 1450 (100) 2900 (200) 5000 (350) Ordering code
OPTIONS
Description
11.04.23.002
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
54
Page. AA3.005
PRIORITY UNLOADING, PILOT OPERATED PRIORITY UNLOADING, PILOT OPERATED COMMON CAVITY COMMON CAVITY
VMSP-78
SIZE 10
04.75.10 - X - 99 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 8 gpm (350 bar) (30 l/min)
Cavity : CA-10A-4N (see page CT.A.004.U) Installation torque : Weight: 30-35 ft-lb 0.617 lbs (41-47 Nm) (0.280 Kg)
Setting is performed pressurizing X port Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the small, pilot-stage poppet from its seat. This action exhausts oil above the main-stage piston (spool type), allowing it to shift fully and unload flow from 1 through 2 with minimal pressure drop. Similarly, when remote pilot pressure at 3 exceeds the pressure setting, a secondary piston lifts the pilot-stage poppet from its seat, again exhausting fluid from 1 through 2. The spring chamber is drained to tank at 4. Any pressure at 4 will be additive to the valve setting.
X
03
Z
10 20 35
SPRINGS
Adj. press. range psi (bar) 100-1500 (7-105) 1300-3000 (90-210) 2200-5000 (150-350) Press. increase psi / turn (bar/turn) 377 (26) 450 (31) 1523 (105) Standard setting psi (bar) (Q=5 l/min) 1000 (70) 1750 (120) 2900 (200)
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
55
Page. AA3.010
RELIEF, PILOT OPERATED SPOOL TYPE RELIEF, PILOT OPERATED SPOOL TYPE PRESSURE COMPENSATED PRESSURE COMPENSATED SPECIAL CAVITY SPECIAL CAVITY
VSP-CC-150 VSP-CC-150
TECHNICAL DATA
Max. pressure: Max. flow: 6000 psi 40 gpm (420 bar) (150 l/min) (0.10 l/min)
Special cavity : 065 (see page CT.S.001.U) Installation torque : Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the pilot-stage ball check from its seat. This action exhausts oil above the main-stage piston (spool type), allowing it to shift and provide relief flow through 2 to tank. Pressure at 2 is additive to the relief setting of the valve. The valve applies a balanced piston design allowing consistent relief operation at the valve setting independent of back-pressure at 2. Weight: 89-98 ft-lb 0.617 lbs (121-133 Nm) (0.280 Kg)
X
03
ADJUSTMENTS
Leakproof inner hex. socket screw
Z
10 20 35
SPRINGS
Adj. press. range psi (bar) 100-1500 (7-105) 145-3000 (10-210) 500-6000 (35-420) Press. increase psi / turn (bar/turn) 305 (21) 508 (35) 1668 (115) Standard setting psi (bar) (Q=5 l/min) 1450 (100) 2900 (200) 5000 (350) Ordering code
OPTIONS
Description
03.05.01.004
Sealing cap
Rev.0208
56
Page. AS1.125
RELIEF, PILOT OPERATED SPOOL TYPE UNLOADING COMMON CAVITY COMMON CAVITY
VSKD-10A
SIZE 10
04.19.02 - X - 85 - Z
TECHNICAL DATA
Max. pressure: Flow range: Leakage at max relief setting ave. : 6000 psi (420 bar)
Cavity : CA-10A-2N (see page CT.A.001.U) Installation torque : Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the pilot-stage piston check from its seat. This action exhausts oil above the main-stage piston (spool type), allowing it to shift fully and unload flow from 1 through 2 with minimal pressure drop. The valve is held fully open until flow through the valve ceases. The spring chamber is drained to tank at 2. Any pressure at 2 will be additive to the valve setting. Weight: 30-35 ft-lb 0.440 lbs (41-47Nm) (0.200 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
20
SPRINGS
Adj. press. range psi (bar) 1000-4000 (70-280) Press. increase psi / turn (bar/turn) 1276 (88) Standard setting psi (bar) (Q=5 l/min) 2900 (200) Ordering code
OPTIONS
Description
11.04.23.002
Tamper resistant cap
Rev.0208
57
PRESSURE REDUCING AND RELIEVING, PRESSURE REDUCING AND RELIEVING, DIRECT ACTING SPOOL DAMPED TYPE DIRECT ACTING SPOOL DAMPED TYPE SPECIAL CAVITY SPECIAL CAVITY
VRPR-07A-S VRPR-07A-S
TECHNICAL DATA
Max. pressure: Max. flow: Int. leakage ave. : 6000 psi 1.3 gpm 3 in /min
3
Special cavity : CA-07A-3N (see page CT.S.001.U) Installation torque : Weight: Initially, flow passes freely from 2 to 1. When the pressure at 1 exceeds the pressure setting, the valve acts to restrict input flow at 2. This increases the pressure drop through the valve and maintains consistent pressure at 1. The spring chamber is drained at 3 to prevent a build-up of back-pressure against the spool. Additionally, if pressure at 1 rises above the pressure setting, flow is relieved to 3 until the setting is re-attained. 18-20 ft-lb 0.309 lbs (24-27 Nm) (0.140 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
03 06
SPRINGS
Adj. press. range psi (bar) 75-435 (5-30) 145-870 (10-60) Press. increase psi / turn (bar/turn) 51 (3.5) 94 (6.5) Standard setting psi (bar) (reduc. mode) 290-360 (20-25) 580-650 (40-45)
Rev.0208
58
PRESSURE REDUCING AND RELIEVING, PRESSURE REDUCING AND RELIEVING, DIRECT ACTING SPOOL TYPE DIRECT ACTING SPOOL TYPE COMMON CAVITY COMMON CAVITY
VRPR-08A
04.95.11.83.56 - Z
TECHNICAL DATA
Max. pressure: Max. flow: Int. leakage ave. : 5000 psi 2 gpm 6 in /min
3
Cavity : CA-08A-3N (see page CT.A.003.U) Installation torque : Weight: Initially, flow passes freely from 2 to 1. When the pressure at 1 exceeds the pressure setting, the valve acts to restrict input flow at 2. This increases the pressure drop through the valve and maintains consistent pressure at 1. The spring chamber is drained at 3 to prevent a build-up of back-pressure against the spool. Additionally, if pressure at 1 rises above the pressure setting, flow is relieved to 3 until the setting is re-attained. 25-30 ft-lb 0.441 lbs (34-41 Nm) (0.200 Kg)
Z
05 10 20
SPRINGS
Adj. press. range psi (bar) 220-725 (15-50) 500-1450 (35-100) 1000-2900 (75-200) Press. increase psi / turn (bar/turn) 131 (9) 319 (22) 769 (53) Standard setting psi (bar) (reduc. mode) 500 (35) 1000 (70) 2200 (150)
Rev.0208
59
PRESSURE REDUCING AND RELIEVING, PRESSURE REDUCING AND RELIEVING, DIRECT ACTING SPOOL TYPE DIRECT ACTING SPOOL TYPE COMMON CAVITY COMMON CAVITY
VRPR-10A VRPR-10A
SIZE 10 SIZE 10
TECHNICAL DATA
Max. pressure (*): Max. flow: Int. leakage ave. : 5000 psi 8 gpm 3 in /min
3
Cavity : CA-10A-3N (see page CT.A.003.U) Installation torque : Weight: Initially, flow passes freely from 2 to 1. When the pressure at 1 exceeds the pressure setting, the valve acts to restrict input flow at 2. This increases the pressure drop through the valve and maintains consistent pressure at 1. The spring chamber is drained at 3 to prevent a build-up of back-pressure against the spool. Additionally, if pressure at 1 rises above the pressure setting, flow is relieved to 3 until the setting is re-attained. 30-35 ft-lb 0.573 lbs (41-47 Nm) (0.260 Kg) (210 bar)
X
03 04
ADJUSTMENTS
Leakproof hex. socket screw
Z
01 02 04 08
SPRINGS
Adj. press. range psi (bar) 30-200 (2-14) 30-350 (2-25) 145-725 (10-50) 400-1160 (28-80) Press. increase psi / turn (bar/turn) 29 (2) 44 (3) 102 (7) 203 (14) Standard setting psi (bar) (reduc. mode) 115-145 (8-10) 100-145 (7-10) 500-580 (35-40) 650-725 (45-50) Ordering code
OPTIONS
Description
11.04.23.004
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
60
Page. AA2.030
PRESSURE REDUCING AND RELIEVING, PRESSURE REDUCING AND RELIEVING, DIRECT ACTING SPOOL TYPE DIRECT ACTING SPOOL TYPE COMMON CAVITY COMMON CAVITY
VRPR-10A-8
SIZE 10
04.95.09.83.85 - Z
TECHNICAL DATA
Max. pressure: Max. flow: Int. leakage ave. : 5000 psi 5 gpm 8 in /min
3
Cavity : CA-10A-3N (see page CT.A.003.U) Line bodies : see page MN1.A External seal kit : see page A11.011 Initially, flow passes freely from 2 to 1. When the pressure at 1 exceeds the pressure setting, the valve acts to restrict input flow at 2. This increases the pressure drop through the valve and maintains consistent pressure at 1. The spring chamber is drained at 3 to prevent a build-up of back-pressure against the spool. Additionally, if pressure at 1 rises above the pressure setting, flow is relieved to 3 until the setting is re-attained. Compared to VRPR-10A it allows a smoother dynamic and lower flow rate. Installation torque : Weight: 30-35 ft-lb 0.573 lbs (41-47 Nm) (0.260 Kg)
Z
04
SPRINGS
Adj. press. range psi (bar) 145-650 (10-45) Press. increase psi / turn (bar/turn) 174 (12) Standard setting psi (bar) (reduc. mode) 500 (35)
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
61
PRESSURE REDUCING AND RELIEVING, DIRECT ACTING PRESSURE REDUCING AND RELIEVING, DIRECT ACTING SPOOL TYPE WITH PILOT CONTROLLED SETTING SPOOL TYPE WITH PILOT CONTROLLED SETTING COMMON CAVITY COMMON CAVITY
VRPD-10A VRPD-10A
SIZE 10 SIZE 10
TECHNICAL DATA
Max. pressure: Max. flow: Int. leakage ave. : 5000 psi 5 gpm 9 in /min
3
Setting vs. pilot pressure : -1 to +1 Cavity : CA-10A-4N (see page CT.A.004.U) Installation torque : Initially, flow passes freely from 2 to 3. When the pressure at 3 exceeds the selected pressure setting, the valve acts to restrict input flow at 2. This increases the pressure drop through the valve and maintains consistent pressure at 3. Remote pilot pressure at 1 goes to further reduce the regulated pressure at 3 and is subtracted from the value of the spring setting. The spring chamber is drained at 4 to prevent a build-up of back-pressure against the spool. Additionally, if pressure at 1 rises above the pressure setting, flow from 3 is relieved to 4 until the setting is re-attained. Weight: 30-35 ft-lb 0.573 lbs (41-47 Nm) (0.260 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
05 10 20
SPRINGS
Adj. press. range psi (bar) 220-725 (15-50) 580-1450 (40-100) 1160-2900 (80-200) Press. increase psi / turn (bar/turn) 87 (6) 203 (14) 406 (28) Standard setting psi (bar) (reduc. mode) 690-725 (47-50) 1400-1450 (95-100) 2750-2900 (190-200)
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
62
Page. AA2.050
PRESSURE REDUCING, PILOT OPERATED SPOOL TYPE COMMON CAVITY COMMON CAVITY
VRPP-10A
SIZE 10
04.93.06 - X - 85 - Z
TECHNICAL DATA
Max. pressure: 5000 psi (350 bar) (280 bar) (60 l/min)
Cavity : CA-10A-3N (see page CT.A.003.U) Installation torque : Weight: Initially, flow passes freely from 2 to 1. When the pressure at 1 exceeds the pressure setting, the valve acts to restrict input flow at 2. This increases the pressure drop through the valve and maintains consistent pressure at 1. The spring chamber is drained at 3 to prevent a build-up of back-pressure against the spool. Std. internal orifice : 30-35 ft-lb 0.463 lbs 0.6 mm (41-47 Nm) (0.210 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20
SPRINGS
Adj. press. range psi (bar) 145-2000 (10-140) 1000-4000 (70-280) Press. increase psi / turn (bar/turn) 696 (48) 1276 (88) Standard setting psi (bar) 1450 (100) 2900 (200) Ordering code
OPTIONS
Description
11.04.23.002
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
63
Page. AA2.010
PRESSURE REDUCING, PILOT OPERATED SPOOL TYPE PRESSURE REDUCING, PILOT OPERATED SPOOL TYPE COMMON CAVITY COMMON CAVITY
VRPP-12A VRPP-12A
SIZE 12 SIZE 12
TECHNICAL DATA
Max. pressure: 5000 psi (350 bar) (350 bar) (100 l/min)
Cavity : CA-12A-3N (see page CT.A.003.U) Installation torque : Weight: Initially, flow passes freely from 2 to 1. When the pressure at 1 exceeds the pressure setting, the valve acts to restrict input flow at 2. This increases the pressure drop through the valve and maintains consistent pressure at 1. The spring chamber is drained at 3 to prevent a build-up of back-pressure against the spool. Std. internal orifice : 60-70 ft-lb 0.661 lbs 0.6 mm (81-95 Nm) (0.300 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20 35
SPRINGS
Adj. press. range psi (bar) 145-2000 (10-140) 1000-4000 (70-280) 2000-5000 (140-350) Press. increase psi / turn (bar/turn) 696 (48) 1276 (88) 2030 (140) Standard setting psi (bar) 1450 (100) 2900 (200) 4000 (280) Ordering code
OPTIONS
Description
11.04.23.002
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
64
Page. AA2.020
PRESSURE REDUCING AND RELIEVING, PRESSURE REDUCING AND RELIEVING, PILOT OPERATED SPOOL TYPE OPERATED SPOOL TYPE PILOT COMMON CAVITY COMMON CAVITY
VRPX-10A
SIZE 10
04.93.07 - X - 85 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 16 gpm (350 bar) (60 l/min)
Cavity : CA-10A-3N (see page CT.A.003.U) Installation torque : Weight: 30-35 ft-lb 0.441 lbs (41-47 Nm) (0.200 Kg)
Std. internal orifice : 0.6 mm Initially, flow passes freely from 2 to 1. When the pressure at 1 exceeds the pressure setting, the conical poppet in the upper, pilot stage is lifted from its seat. This allows the main-stage piston to shift, restricting input flow at 2. This increases the pressure drop through the valve and maintains consistent pressure at 1. The spring chamber is drained at 3 to prevent a build-up of back-pressure against the spool. Additionally, if pressure at 1 rises above the pressure setting, flow is relieved to 3 until the setting is re-attained.
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
10 20
SPRINGS
Adj. press. range psi (bar) 500-2000 (35-140) 1000-4000 (70-280) Press. increase psi / turn (bar/turn) 696 (48) 1276 (88) Standard setting psi (bar) (reduc. mode) 1450 (100) 2900 (200) Ordering code
OPTIONS
Description
11.04.23.002
Tamper resistant cap
Special settings available. Contact factory authorized representative for ordering code.
Rev.0208
65
Page. AA2.040
AUTOMATIC SHUT-OFF, PILOT TO CLOSE AUTOMATIC SHUT-OFF, PILOT TO CLOSE SPECIAL CAVITY SPECIAL CAVITY
VEM-5-C-N VEM-5-C-N
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 0.26 gpm (350 bar) (1 l/min)
Special cavity : 348 (see page CT.S.001.U) Installation torque : Weight: 20-22 ft-lb 0.110 lbs (27-30 Nm) (0.050 Kg)
Pilot flow is normally allowed bi-directionally between 1 and 2. When pressure at 1 rises above the selected pressure setting, the ball check seats and blocks flow from 1 to 2. The valve is intended to block undesirable pressure spikes in pilot control systems, particularly in counterbalance applications.
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Z
05 10 20
SPRINGS
Adj. press. range psi (bar) 220-500 (15-35) 290-1000 (20-70) 725-2000 (50-140) Press. increase psi / turn (bar/turn) 239 (16.5) 471 (32.5) 972 (67) Standard setting psi (bar) 290 (20) 725 (50) 1450 (100) Ordering code 03.51.01.312 03.51.01.313 03.51.01.314 Color black blue green
Rev.0208
66
Page. AS9.010
FLOW CONTROL VALVES FLOW CONTROL VALVES CARTRIDGE RESTRICTORS CARTRIDGE RESTRICTORS COMMON CAVITY COMMON CAVITY
ST-C-06
SIZE 08
OD.21.01 - X - 56
TECHNICAL DATA
Maximum Operating Pressure Rated Flow Cavity - Tooling (CA-08A-2N) Weight Fluids - Temperatures Testing Conditions - Seals Internal Leakage Filtration : 25 better m nominal or 5000 psi 11 gpm (350 bar) (40 l/min)
page CT.A.001.U 0.199 lbs (0.090 kg) page 7.01.040 page 7.01.040 page 7.01.040 page 7.01.050 0.7 ft-lb 3.7 ft-lb (1 Nm) (5 Nm) unrestricted
Adjustment Torque at 145 psi (10 bar) Adjustment Torque at 5000 psi (350 bar) Mounting Position
ORDERING OPTIONS
03 Socket Screw
67
3.11.010
FLOW CONTROL VALVES FLOW CONTROL VALVES CARTRIDGE RESTRICTORS CARTRIDGE RESTRICTORS COMMON CAVITY COMMON CAVITY ST-C-10A ST-C-10A SIZE 10 SIZE 10
OD.21.01 - XX 36 OD.21.01 - - - 36
TECHNICAL DATA
Maximum Operating Pressure Rated Flow Cavity - Tooling (CA-10A-2N) Weight Fluids - Temperatures Testing Conditions - Seals Internal Leakage Filtration : 25 better m nominal or 5000 psi 19 gpm (350 bar) (70 l/min)
page CT.A.001.U 0.397 lbs (0.180 kg) page 7.01.040 page 7.01.040 page 7.01.040 page 7.01.050 0.7 ft-lb 7.4 ft-lb (1 Nm) (10 Nm) unrestricted
Adjustment Torque at 145 psi (10 bar) Adjustment Torque at 5000 psi (350 bar) Mounting Position
ORDERING OPTIONS
03 Socket Screw
68
3.15.020
FLOW CONTROL VALVES FLOW CONTROL VALVES CARTRIDGE RESTRICTORS CARTRIDGE RESTRICTORS COMMON CAVITY COMMON CAVITY
ST-C-12A
ST-C-12A 12 SIZE
OD.21.01 - X - 89 SIZE 12
OD.21.01 - X - 89
TECHNICAL DATA
Maximum Operating Pressure Rated Flow Cavity - Tooling (CA-12A-2N) Weight Fluids - Temperatures Testing Conditions - Seals Internal Leakage Filtration : 25 better m nominal or 5000 psi 39 gpm (350 bar) (150 l/min)
page CT.A.001.U 0.684 lbs (0.310 kg) page 7.01.040 page 7.01.040 page 7.01.040 page 7.01.050 0.7 ft-lb 13.3 ft-lb (1 Nm) (18 Nm) unrestricted
Adjustment Torque at 145 psi (10 bar) Adjustment Torque at 5000 psi (350 bar) Mounting Position
ORDERING OPTIONS
03 Socket Screw
69
3.15.030
FLOW CONTROL VALVES FLOW CONTROL VALVES CARTRIDGE RESTRICTORS CARTRIDGE RESTRICTORS COMMON CAVITY COMMON CAVITY ST-C-16A ST-C-16A SIZE 16 SIZE 16
OD.21.01 - XX - 75 OD.21.01 - - 75
TECHNICAL DATA
Maximum Operating Pressure Rated Flow Cavity - Tooling (CA-16A-2N) Weight Fluids - Temperatures Testing Conditions - Seals Internal Leakage Filtration : 25 better m nominal or 5000 psi 39 gpm (350 bar) (150 l/min)
page CT.A.001.U 0.684 lbs (0.310 kg) page 7.01.040 page 7.01.040 page 7.01.040 page 7.01.050 0.7 ft-lb 13.3 ft-lb (1 Nm) (18 Nm) unrestricted
Adjustment Torque at 145 psi (10 bar) Adjustment Torque at 5000 psi (350 bar) Mounting Position
ORDERING OPTIONS
03 Socket Screw
70
3.15.040
NEEDLE RESTRICTOR, FREE REVERSE FLOW NEEDLE RESTRICTOR, FREE REVERSE FLOW COMMON CAVITY COMMON CAVITY
STVU-08A
SIZE 08
04.01.02 - X - 56.00
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 11 gpm (350 bar) (40 l/min)
Cavity : CA-08A-2N (see page CT.A.001.U) Installation torque : Weight: With flow from 2 to 1, the valve provides a fully adjustable orifice restriction. Free flow is permitted from 1 to 2, regardless of valve adjustment, by when pressure overcomes the spring bias of the valves check function. 25-30 ft-lb 0.353 lbs (34-41 Nm) (0.160 Kg)
X
03
ADJUSTMENTS
Leakproof hex. socket screw
Rev.0208
71
AA7.010
FLOW CONTROL, 2-WAY PRESSURE COMPENSATED FLOW CONTROL, 2-WAY PRESSURE COMPENSATED FIXED SETTING FIXED SETTING COMMON CAVITY COMMON CAVITY
VRFA-08A VRFA-08A
SIZE 08 SIZE 08
TECHNICAL DATA
Pressure min-max: 145-3000 psi (10-210 bar)
Flow: non adjustable (see below) Cavity : CA-08A-2N (see page CT.A.001.U) Installation torque : Weight: 25-30 ft-lb 0.265 lbs (34-41 Nm) (0.120 Kg)
A constant flow rate, regardless of system pressures, is established from 1 to 2 while a minimum pressure differential of 145 psi exists between the two ports. The valve cannot be adjusted for variable flow output. Flow from 2 to 1 is limited by the diameter of the selected control orifice and is not pressure compensated.
09 13 15 20 30 40 53 65 80
Rev.0208
72
FLOW CONTROL, 2-WAY PRESSURE COMPENSATED PARTIALLY ADJUSTABLE PARTIALLY ADJUSTABLE COMMON CAVITY COMMON CAVITY
VRFA-10A
SIZE 10
04.02.01 - X - 85 - Z
TECHNICAL DATA
Pressure min-max: 200-5000 psi (14-350 bar)
Flow range: see below Cavity : CA-10A-2N (see page CT.A.001.U) Installation torque : Weight: 30-35 ft-lb 0.573 lbs (41-47 Nm) (0.260 Kg)
A constant flow rate, regardless of system pressures, is established from 1 to 2 while a minimum pressure differential of 200 psi exists between the two ports. Output flow can be varied through a limited range of adjustment and coordinate change in minimum required pressure differential. Flow from 2 to 1 is limited by the diameter of the selected control orifice and is not pressure compensated.
ADJUSTMENTS
Z
04 06 08 11 14 20 26
Rev.0208
73
FLOW CONTROL, 2-WAY PRESSURE COMPENSATED FLOW CONTROL, 2-WAY PRESSURE COMPENSATED FULLY ADJUSTABLE FULLY ADJUSTABLE COMMON CAVITY COMMON CAVITY
VRFB-10A VRFB-10A
SIZE 10 SIZE 10
TECHNICAL DATA
Pressure min-max: 200-5000 psi (14-350 bar)
Flow range: see below Cavity : CA-10A-2N (see page CT.A.001.U) Installation torque : Weight: 30-35 ft-lb 0.595 lbs (41-47 Nm) (0.270 Kg)
A constant flow rate, regardless of system pressures, is established from 1 to 2 while a minimum pressure differential of 200 psi exists between the two ports. Output flow can be varied from closed to the nominal maximum rating for the valve. Flow from 2 to 1 is limited by the diameter of the selected control orifice and is not pressure compensated.
ADJUSTMENTS
20 0.01-5.28 40 0.03-7.93
Rev.0208
74
AA7.040
FLOW CONTROL, 3-WAY PRESSURE COMPENSATED FLOW CONTROL, 3-WAY PRESSURE COMPENSATED COMBINATION TYPE PARTIALLY ADJUSTABLE COMMON CAVITY COMMON CAVITY
VRFC-10A
SIZE 10
04.04.01 - X - 85 - Z
TECHNICAL DATA
Pressure min-max: Max inlet flow: 200-5000 psi 16 gpm (14-350 bar) (60 l/min)
Flow range: see below Cavity : CA-10A-3N (see page CT.A.003.U) Installation torque : Weight: A constant flow rate, regardless of system pressures, is established from 1 to 3 while a minimum pressure differential of 200 psi exists between the two ports. Input flow supplied to 1 in excess of the regulated output at 3 is by-passed to 2. Output flow can be varied through a limited range of adjustment and coordinate change in minimum required pressure differential. Flow from 3 to 1 is limited by the diameter of the selected control orifice and is not pressure compensated. Flow from 2 to 1 is not permitted. 30-35 ft-lb 0.573 lbs (41-47 Nm) (0.260 Kg)
ADJUSTMENTS
Z
04 06 08 09 11 14 20 26
Rev.0208
75
FLOW CONTROL, 3-WAY PRESSURE COMPENSATED FLOW CONTROL, 3-WAY PRESSURE COMPENSATED COMBINATION TYPE FULLY ADJUSTABLE COMBINATION TYPE FULLY ADJUSTABLE COMMON CAVITY COMMON CAVITY
VRFD-10A VRFD-10A
SIZE 10 SIZE 10
TECHNICAL DATA
Pressure min-max: Max inlet flow: 200-5000 psi 16 gpm (14-350 bar) (60 l/min)
Flow range: see below Cavity : CA-10A-3N (see page CT.A.003.U) Installation torque : Weight: A constant flow rate, regardless of system pressures, is established from 1 to 3 while a minimum pressure differential of 200 psi exists between the two ports. Input flow supplied to 1 in excess of the regulated output at 3 is by-passed to 2. Output flow can be varied from closed to the nominal maximum rating for the valve. Flow from 3 to 1 is limited by the diameter of the selected control orifice and is not pressure compensated. Flow from 2 to 1 is not permitted. 30-35 ft-lb 0.573 lbs (41-47 Nm) (0.260 Kg)
ADJUSTMENTS
20 0.01-5.28 40 0.03-7.93
Rev.0208
76
AA7.060
DSDN-10A
SIZE 10
04.05.04.00.85 - Z
TECHNICAL DATA
Pressure min-max: 145-5000 psi (10-350 bar)
Range of rated total flow: see table Z Division ratio: 50%-50% Cavity : CA-10A-4N (see page CT.A.004.U) Installation torque : Weight: Input flow at 3 will be divided and output equally to 2 and 4 independent of system pressures. Should either 2 or 4 become blocked in flow division mode, approximately 5% of the input flow will be transmitted to the open port. Flow combining is not permitted. 30-35 ft-lb 0.617 lbs (41-47 Nm) (0.280 Kg)
Slippage (tolerance) from theoretical divided flows: 5% to 10%, depending from inlet flow (see diagram). N.B.: slippage is lowest toward upper limit of nominal range.
Z
02 04 08 16 25 30 40
Rev.0208
77
DSDN-16A DSDN-16A
SIZE 16 SIZE 16
04.05.03.00.27 - -Z 04.05.03.00.27 Z
TECHNICAL DATA
Pressure min-max: 145-5000 psi (10-350 bar)
Range of rated total flow: see table Z Division ratio: 50%-50% Cavity : CA-16A-4N (see page CT.A.004.U) Installation torque : Weight: Input flow at 3 will be divided and output equally to 2 and 4 independent of system pressures. Should either 2 or 4 become blocked in flow division mode, approximately 5% of the input flow will be transmitted to the open port. Flow combining is not permitted. 80-90 ft-lb 0.904 lbs (108-122 Nm) (0.410 Kg)
Slippage (tolerance) from theoretical divided flows: 5% to 10%, depending from inlet flow (see diagram). N.B.: slippage is lowest toward upper limit of nominal range.
04 3.96-11.63 gpm 06 5.81-17.44 gpm 09 7.93-23.25 gpm 13 11.63-34.88 gpm 16 14.53-43.59 gpm
Rev. 0208
78
AA7.080
FLOW DIVIDER AND COMBINER FLOW DIVIDER AND COMBINER COMMON CAVITY COMMON CAVITY
DRFN-10A
SIZE 10
04.05.01.00.85 - Z
TECHNICAL DATA
Pressure min-max: 145-5000 psi (10-350 bar)
Range of rated total flow: see table Z Division or combination ratio: 50%-50% Cavity : CA-10A-4N (see page CT.A.004.U) Installation torque : Weight: Input flow at 3 will be divided and output equally to 2 and 4 independent of system pressures. Flow input at 2 and 4 will be combined and output at 3. Should either 2 or 4 become blocked in flow division mode, approximately 5% of the input flow will be transmitted to the open port. 30-35 ft-lb 0.617 lbs (41-47 Nm) (0.280 Kg)
Slippage (tolerance) from theoretical divided flows: 5% to 10%, depending from inlet flow (see diagram). N.B.: slippage is lowest toward upper limit of nominal range.
Z
02 04 08 16 25 30 40
Rev.0208
79
FLOW DIVIDER AND COMBINER FLOW DIVIDER AND COMBINER COMMON CAVITY COMMON CAVITY
DRFN-16A DRFN-16A
SIZE 16 SIZE 16
04.05.02.00.27 - -Z 04.05.02.00.27 Z
TECHNICAL DATA
Pressure min-max: 145-5000 psi (10-350 bar)
Range of rated total flow: see table Z Division or combination ratio: 50%-50% Cavity : CA-16A-4N (see page CT.A.004.U) Installation torque : Weight: Input flow at 3 will be divided and output equally to 2 and 4 independent of system pressures. Flow input at 2 and 4 will be combined and output at 3. Should either 2 or 4 become blocked in flow division mode, approximately 5% of the input flow will be transmitted to the open port. 80-90 ft-lb 0.904 lbs (108-122 Nm) (0.410 Kg)
Slippage (tolerance) from theoretical divided flows: 5% to 10%, depending from inlet flow (see diagram). N.B.: slippage is lowest toward upper limit of nominal range.
04 3.96-11.63 gpm 06 5.81-17.44 gpm 09 7.93-23.25 gpm 13 11.63-34.88 gpm 16 14.53-43.59 gpm
Rev.0208
80
AA7.100
VUCN-08A
SIZE 08
04.31.20.00.56 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 6000 psi 13 gpm (420 bar) (50 l/min)
Cavity : CA-08A-2N (see page CT.A.001.U) Installation torque : Weight: 25-30 ft-lb 0.265 lbs (34-41 Nm) (0.120 Kg)
When pressure at 1 rises above the spring bias pressure, the poppet is lifted and flow allowed from 1 to 2. The valve is closed (checked) from 2 to 1. Precision machining and hardening processes allow virtually leak-free performance in the checked condition.
Z
00 03 05 14
SPRINGS
Cracking pressure psi (bar) 15 (1) 39 (2.7) 75 (5) 200 (14)
Rev.0208
81
Page AA4.010
CHECK, POPPET TYPE CHECK, POPPET TYPE COMMON CAVITY COMMON CAVITY
VUCN-10A VUCN-10A
SIZE 10 SIZE 10
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 21 gpm (350 bar) (80 l/min)
Cavity : CA-10A-2N (see page CT.A.001.U) Installation torque : Weight: 30-35 ft-lb 0.331 lbs (41-47 Nm) (0.150 Kg)
When pressure at 1 rises above the spring bias pressure, the poppet is lifted and flow allowed from 1 to 2. The valve is closed (checked) from 2 to 1. Precision machining and hardening processes allow virtually leak-free performance in the checked condition.
Z
00 05 15
SPRINGS
Cracking pressure psi (bar) 7 (0.5) 75 (5) 220 (15)
Rev.0208
82
Page. AA4.020
VUCN-10A-TR
SIZE 10
04.31.37 - X - 85 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 21 gpm (350 bar) (80 l/min)
Cavity : CA-10A-2N (see page CT.A.001.U) Installation torque : Weight: 30-35 ft-lb 0.331 lbs (41-47 Nm) (0.150 Kg)
When pressure at 1 rises above the spring bias pressure, the poppet is lifted and flow allowed from 1 to 2. The valve is closed (checked) from 2 to 1. If the pressure at 2 increases to meet the thermal relief valve setting, a small amount of oil is allowed from 2 to 1, preventing damage from increasing pressure. Precision machining and hardening processes allow virtually leak-free performance in the checked condition.
X
35
Z
00
SPRINGS
Cracking pressure psi (bar) 7 (0.5)
Rev.0208
83
CHECK, POPPET TYPE CHECK, POPPET TYPE COMMON CAVITY COMMON CAVITY
VUCN-12A VUCN-12A
SIZE 12 SIZE 12
04.31.28.00.57 - - Z 04.31.28.00.57 Z
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 32 gpm (350 bar) (120 l/min)
Cavity : CA-12A-2N (see page CT.A.001.U) Installation torque : Weight: 60-70 ft-lb 0.397 lbs (81-95 Nm) (0.180 Kg)
When pressure at 1 rises above the spring bias pressure, the poppet is lifted and flow allowed from 1 to 2. The valve is closed (checked) from 2 to 1. Precision machining and hardening processes allow virtually leak-free performance in the checked condition.
Z
00 05 15
SPRINGS
Cracking pressure psi (bar) 15 (1) 75 (5) 220 (15)
Rev.0208
84
Page. AA4.030
VUCN-16A
SIZE 16
04.31.25.00.27 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 53 gpm (350 bar) (200 l/min)
Cavity : CA-16A-2N (see page CT.A.001.U) Installation torque : Weight: 80-90 ft-lb 0.595 lbs (108-122 Nm) (0.270 Kg)
When pressure at 1 rises above the spring bias pressure, the poppet is lifted and flow allowed from 1 to 2. The valve is closed (checked) from 2 to 1. Precision machining and hardening processes allow virtually leak-free performance in the checked condition.
Z
00 02
SPRINGS
Cracking pressure psi (bar) 15 (1) 30 (2)
Rev.0208
85
AA4.040
CHECK, POPPET TYPE CHECK, POPPET TYPE COMMON CAVITY COMMON CAVITY
VUCN-20A VUCN-20A
SIZE 20 SIZE 20
04.31.32.00.58 - -Z 04.31.32.00.58 Z
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 95 gpm (350 bar) (360 l/min)
Cavity : CA-20A-2N (see page CT.A.001.U) Installation torque : Weight: 95-110 ft-lb 0.838 lbs (128-149 Nm) (0.380 Kg)
When pressure at 1 rises above the spring bias pressure, the poppet is lifted and flow allowed from 1 to 2. The valve is closed (checked) from 2 to 1. Precision machining and hardening processes allow virtually leak-free performance in the checked condition.
Z
00 03 07
SPRINGS
Cracking pressure psi (bar) 5 (0.35) 51 (3.5) 102 (7)
Rev.0208
86
AA4.045
CHECK, POPPET REVERSE TYPE CHECK, POPPET REVERSE TYPE COMMON CAVITY COMMON CAVITY
VURN-08A
SIZE 08
04.31.21.00.56 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 6000 psi 7 gpm (420 bar) (25 l/min)
Cavity : CA-08A-2N (see page CT.A.001.U) Installation torque : Weight: 25-30 ft-lb 0.287 lbs (34-41 Nm) (0.130 Kg)
When pressure at 2 rises above the spring bias pressure, the poppet is pushed from its seat and flow is allowed from 2 to 1. The valve is closed (checked) from 1 to 2. Precision machining and hardening processes allow virtually leak-free performance in the checked condition.
Z
02
SPRINGS
Cracking pressure psi (bar) 30 (2)
Rev.0208
87
AA4.050
CHECK, POPPET REVERSE TYPE CHECK, POPPET REVERSE TYPE COMMON CAVITY COMMON CAVITY
VURN-10A VURN-10A
SIZE 10 SIZE 10
04.31.27.00.85 - - Z 04.31.27.00.85 Z
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 16 gpm (350 bar) (60 l/min)
Cavity : CA-10A-2N (see page CT.A.001.U) Installation torque : Weight: 30-35 ft-lb 0.265 lbs (41-47 Nm) (0.120 Kg)
When pressure at 2 rises above the spring bias pressure, the poppet is pushed from its seat and flow is allowed from 2 to 1. The valve is closed (checked) from 1 to 2. Precision machining and hardening processes allow virtually leak-free performance in the checked condition.
Z
00 02
SPRINGS
Cracking pressure psi (bar) 15 (1) 30 (2)
Rev.0208
88
AA4.060
CHECK, POPPET REVERSE TYPE CHECK, POPPET REVERSE TYPE COMMON CAVITY COMMON CAVITY
VURN-12A
SIZE 12
04.31.36.00.57 - Z
TECHNICAL DATA
Max. pressure: Max. flow: 5000 psi 24 gpm (350 bar) (90 l/min)
Cavity : CA-12A-2N (see page CT.A.001.U) Installation torque : Weight: 60-70 ft-lb 0.441 lbs (81-95 Nm) (0.200 Kg)
When pressure at 2 rises above the spring bias pressure, the poppet is pushed from its seat and flow is allowed from 2 to 1. The valve is closed (checked) from 1 to 2. Precision machining and hardening processes allow virtually leak-free performance in the checked condition.
Z
02
SPRINGS
Cracking pressure psi (bar) 30 (2)
Rev.0208
89
DIRECTIONAL POPPET TYPE, DIRECTIONAL POPPET TYPE, SHUTTLE SHUTTLE SPECIAL CAVITY SPECIAL CAVITY
SELC-04A SELC-04A
04.94.07.00.54.00 04.94.07.00.54.00
TECHNICAL DATA
Max. pressure: 5000 psi (350 bar)
Max. flow: see performance graph Nominal size DN 2.5 Special cavity : CA-04A-3Y (see page CT.S.002.U) Installation torque : Weight: The single ball shuttle allows flow from the higher pressure of two work ports 1 and 3 to the 2 port. 7 ft-lb 0.013 lbs (10 Nm) (0.006 Kg)
Rev.0208
90
DIRECTIONAL POPPET TYPE, DIRECTIONAL POPPET TYPE, SHUTTLE SHUTTLE COMMON CAVITY COMMON CAVITY
SELB-08A
SIZE 08
04.94.05.00.56.00
TECHNICAL DATA
Max. pressure: 5000 psi (350 bar)
Max. flow: see performance graph Nominal size DN 3 Cavity : CA-08A-3N (see page CT.A.003.U) Installation torque : Weight: The single ball shuttle allows flow from the higher pressure of two work ports 1 and 3 to the 2 port. 25-30 ft-lb 0.132 lbs (34-41 Nm) (0.060 Kg)
Rev.0208
91
DIRECTIONAL POPPET TYPE, DIRECTIONAL POPPET TYPE, SHUTTLE SHUTTLE COMMON CAVITY COMMON CAVITY
SELC-08A SELC-08A
SIZE 08 SIZE 08
TECHNICAL DATA
Max. pressure: 5000 psi (350 bar)
Max. flow: see performance graph Nominal size DN 3 Cavity : CA-08A-2N (see page CT.A.001.U) Installation torque : Weight: The single ball shuttle allows flow from the higher pressure of two work ports 1 and 2 to the A port, externally located in the hexagon of the cartridge. 25-30 ft-lb 0.141 lbs (34-41 Nm) (0.064 Kg)
X
09 55
PORT A
9/16-18 UNF
G 1/4
Rev.0208
92
DIRECTIONAL POPPET TYPE, DIRECTIONAL POPPET TYPE, SHUTTLE, DOUBLE CHECK SHUTTLE, DOUBLE CHECK COMMON CAVITY COMMON CAVITY
VUDN-08A
SIZE 08
04.39.01.00.56 - Z
TECHNICAL DATA
Max. pressure: Max flow: 5000 psi 2.6 gpm (350 bar) (10 l/min)
Cavity : CA-08A-3N (see page CT.A.003.U) Installation torque : Weight: 25-30 ft-lb 0.132 lbs (34-41 Nm) (0.060 Kg)
This valve combines two simple check valves into a single cartridge. It connects the work port with the higher pressure to the signal or common port. The signal is sensed at port 2.
Z
00
SPRINGS
Cracking pressure psi (bar) 15 (1)
Rev.0208
93
PILOT OPERATED CHECK, PILOT TO OPEN PILOT OPERATED CHECK, PILOT TO OPEN SUN CAVITY INTERCHANGE SUN CAVITY INTERCHANGE
VSON-08U VSON-08U
T-11A T-11A
TECHNICAL DATA
Max. pressure: Max. flow: Pilot ratio: Cavity : SUN T-11A Installation torque : When pressure at 2 rises above the spring bias pressure, the poppet is pushed from its seat and flow is allowed from 2 to 1. The valve is normally closed (checked) from 1 to 2. When sufficient pilot pressure is present at port 3, the pilot piston acts to push the poppet from its seat and flow is allowed from 1 to 2. Precision machining and hardening processes allow virtually leak-free performance in the checked condition. Available with manual override option. Weight: 30-37 ft-lb 0.265 lbs (40-50 Nm) (0.120 Kg) 5000 psi 16 gpm 3.2 : 1 (350 bar) (60 l/min)
X
00 10 01 11
OPTIONS
No O-Ring, No Manual Override With O-Ring, No Manual Override No O-Ring, With Manual Override With O-Ring, With Manual Override
Z
00
SPRINGS
Cracking pressure psi (bar) 30 (2)
Rev.0208
94
AB4.030
PILOT OPERATED CHECK, PILOT TO OPEN PILOT OPERATED CHECK, PILOT TO OPEN SUN CAVITY INTERCHANGE SUN CAVITY INTERCHANGE
VSON-12U
T-2A
04.33.07 - X - 86 - Z
TECHNICAL DATA
Max. pressure: Max. flow: Pilot ratio : Cavity : SUN T-2A Installation torque : Weight: When pressure at 2 rises above the spring bias pressure, the poppet is pushed from its seat and flow is allowed from 2 to 1. The valve is normally closed (checked) from 1 to 2. When sufficient pilot pressure is present at port 3, the pilot piston acts to push the poppet from its seat and flow is allowed from 1 to 2. Precision machining and hardening processes allow virtually leak-free performance in the checked condition. 44-52 ft-lb 0.551 lbs (60-70 Nm) (0.250 Kg) 5000 psi 32 gpm 3.2 : 1 (350 bar) (120 l/min)
X
00 10
With O-Ring
Z
00
SPRINGS
Cracking pressure psi (bar) 30 (2)
Rev.0208
95
AB4.040
PILOT OPERATED CHECK, PILOT TO OPEN PILOT OPERATED CHECK, PILOT TO OPEN SUN CAVITY INTERCHANGE SUN CAVITY INTERCHANGE
VSON-16U VSON-16U
T-17A T-17A
TECHNICAL DATA
Max. pressure: Max. flow: Pilot ratio: Cavity : SUN T-17A Installation torque : When pressure at 2 rises above the spring bias pressure, the poppet is pushed from its seat and flow is allowed from 2 to 1. The valve is normally closed (checked) from 1 to 2. When sufficient pilot pressure is present at port 3, the pilot piston acts to push the poppet from its seat and flow is allowed from 1 to 2. Precision machining and hardening processes allow virtually leak-free performance in the checked condition. Weight: 148-159 ft-lb 1.477 lbs (200-215 Nm) (0.670 Kg) 5000 psi 63 gpm 3:1 (350 bar) (240 l/min)
X
00 10
With O-Ring
Z
00
SPRINGS
Cracking pressure psi (bar) 22 (1.5)
Rev.0208
96
AB4.050