Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
A 07/00
16RIA SERIES
MEDIUM POWER THYRISTORS Stud Version
Features
Improved glass passivation for high reliability and exceptional stability at high temperature High di/dt and dv/dt capabilities Standard package Low thermal resistance Metric threads version available Types up to 1600V V DRM / V RRM
16A
Typical Applications
Medium power switching Phase control applications Can be supplied to meet stringent military, aerospace and other high-reliability requirements
10 to 120
16 85 35
Units
A C A A A A 2s A 2s V s C
@ 50Hz @ 60Hz
I t
@ 50Hz @ 60Hz
VDRM/VRRM tq TJ typical
- 65 to 125
www.irf.com
16RIA Series
Bulletin I2404 rev. A 07/00
mA
20
10
(1) Units may be broken over non-repetitively in the off-state direction without damage, if dI/dt does not exceed 20A/s (2) For voltage pulses with tp 5ms
On-state Conduction
Parameter
IT(AV) IT(RMS) ITSM Max. average on-state current @ Case temperature Max. RMS on-state current Max. peak, one-cycle non-repetitive surge current
16RIA 10 to 120
16 85 35 340 360 285 300
140 to 160
16 85 35 225 235 190 200 255 235 180 165 2550 1.14 1.31 14.83 12.03 --1.80
Units
A C A A
Conditions
180 sinusoidal conduction
No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial TJ = TJ max.
I2t
A2s
I2t
A2s V
t = 0.1 to 10ms, no voltage reapplied, TJ = TJ max. (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max. (I > x IT(AV)), TJ = TJ max.
VT(TO)1 Low level value of threshold VT(TO)2 High level value of threshold voltage rt1 rt2 VTM Low level value of on-state slope resistance High level value of on-state slope resistance Max. on-state voltage
IH IL
130 200
mA
www.irf.com
16RIA Series
Bulletin I2404 rev. A 07/00
Switching
Parameter
di/dt Max. rate of rise of turned-on current VDRM 600V VDRM 800V VDRM 1000V VDRM 1600V tgt trr tq Typical turn-on time Typical reverse recovery time 200 180 160 150 0.9 4 s TJ = 25C, at = rated VDRM/VRRM, TJ = 125C TJ = TJ max., ITM = IT(AV), tp > 200s, di/dt = -10A/s Typical turn-off time 110 TJ = TJ max., ITM = IT(AV), tp > 200s, VR = 100V, di/dt = -10A/s, dv/dt = 20V/s linear to 67% VDRM, gate bias 0V-100W (*) tq = 10sup to 600V, tq = 30s up to 1600V available on special request. A/s
16RIA
Units
Conditions
TJ = TJ max., VDM = rated VDRM Gate pulse = 20V, 15, tp = 6s, tr = 0.1s max. ITM = (2x rated di/dt) A
Blocking
Parameter
dv/dt Max. critical rate of rise of off-state voltage
16RIA
100 300 (*)
Units
V/s
Conditions
TJ = TJ max. linear to 100% rated VDRM TJ = TJ max. linear to 67% rated VDRM
(**) Available with: dv/dt = 1000V/s, to complete code add S90 i.e. 16RIA160S90.
Triggering
Parameter
PGM IGM -VGM IGT Maximum peak gate power PG(AV) Maximum average gate power Max. peak positive gate current Maximum peak negative gate voltage DC gate current required to trigger 90 60 35 VGT DC gate voltage required to trigger IGD VGD DC gate current not to trigger DC gate voltage not to trigger 3.0 2.0 1.0 2.0 0.2 V V mA V mA TJ = - 65C TJ = 25C TJ = 125C TJ = - 65C TJ = 25C TJ = 125C TJ = TJ max., VDRM = rated value TJ = TJ max. VDRM = rated value Max. gate current/ voltage not to trigger is the max. value which will not trigger any unit with rated VDRM anode-to-cathode applied Max. required gate trigger current/ voltage are the lowest value which will trigger all units 6V anode-tocathode applied
16RIA
8.0 2.0 1.5 10
Units Conditions
W A V TJ = TJ max. TJ = TJ max. TJ = TJ max.
www.irf.com
16RIA Series
Bulletin I2404 rev. A 07/00
16RIA
- 65 to 125 - 65 to 125 0.86
Units Conditions
C C K/W DC operation
R thJC Max. thermal resistance, junction to case R thCS Max. thermal resistance, case to heatsink T Mounting torque to nut
0.35
K/W
to device 25 0.29 2.8 lbf-in kgf.m Nm g (oz) See Outline Table Lubricated threads (Non-lubricated threads)
14 (0.49)
TO-208AA (TO-48)
RthJC Conduction
(The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC)
Conduction angle
180 120 90 60 30
Conditions
TJ = TJ max.
16
1
RIA 160
2 3
M
4
S90
5
1 2 3 4
Current code Essential part number Voltage code: Code x 10 = VRRM (See Voltage Rating Table) None = Stud base TO-208AA (TO-48) 1/4" 28UNF-2A M = Stud base TO-208AA (TO-48) M6 X 1
Critical dv/dt: None = 300V/s (Standard value) S90 = 1000V/s (Special selection)
www.irf.com
16RIA Series
Bulletin I2404 rev. A 07/00
Outline Table
130
Conduction Angle
Conduction Period
90 80 70 60 50 0
30
30
60
60 90 120 180 DC 10 20 30 40
90
120
180
10
15
20
25
www.irf.com
16RIA Series
Bulletin I2404 rev. A 07/00
Maximum Average On-state Power Loss (W) 45 40 35 30 25 20 15 10 5 0 0 5 10
Conduction Angle
hS R t
K/ W
= 1 0. W K/
3K /W 4K /W 5K /W 7K /W
10 K/W
a elt -D R
25
50
75
100
125
DC 180 120 90 60 30
hS R t
K/ W
= 1 0. W K/
3K /W 4K /W 5K /W 7K /W
10 K/W
a elt -D R
25
50
75
100
125
350 Peak Half Sine Wave On-state Current (A) 325 300 275 250 225 200 175 150
Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial TJ= 125C No Voltage Reapplied Rated V RRM Reapplied
125 0.01
www.irf.com
16RIA Series
Bulletin I2404 rev. A 07/00
1000 Instantaneous On-state Current (A) 16RIA Series (100 to 1200V)
100
10
TJ = 25C TJ = 125C
1 0.5
1.5
2.5
3.5
120
110
Conduction Angle
100
30
60
90
120
90
180
180 DC 20 25 30
80
10
12 14
16 18
10
15
S R th
/W 1K W K/ 1.5 /W 2K W K/
5 2.
3. 5
K/ W
/W .5 K =0
5K /W
R elta -D
7K /W
Conduction Angle
10 K/W
www.irf.com
16RIA Series
Bulletin I2404 rev. A 07/00
Maximum Average On-state Power Loss (W) 40 35 30 25 DC 180 120 90 60 30
SA R th
/W 1K W K/
2 K/ W 2. 5K /W
3.5 K/W
5 1.
K/W .5 =0 aR elt -D
20 RMS Limit 15 10 5 0 0 4 8 12
Conduction Period
5K /W
7K /W
10 K /W
28 0
25
50
75
100
125
At Any Rated Load Condition And With Rated V RRMApplied Following Surge. Initial T J = 125C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s
Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial TJ = 125C No Voltage Reapplied Rated V Reapplied RRM
75 0.01
100
T = 25C J 10 T = 125C J 16RIA Series (1400 to 1600V) 1 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
www.irf.com
16RIA Series
Bulletin I2404 rev. A 07/00
Transient Thermal Impedance Z thJC (K/W) 10 Steady State Value RthJC = 1.15 K/W (DC Operation) 1
0.01 0.001
0.01
10
(1) PGM = 16W, (2) PGM = 30W, (3) PGM = 60W, (4) PGM = 60W, (a)
Tj = 125 C
(1)
(2) (3)
(4)
0.1 0.001
WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. IR CANADA: 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. IR ITALY: Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. IR FAR EAST: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. IR SOUTHEAST ASIA: 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. IR TAIWAN: 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. http://www.irf.com Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice.
www.irf.com
This datasheet has been downloaded from: www.DatasheetCatalog.com Datasheets for electronic components.