Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PEV
1 12
Plug, type A
125
250
1 12
Plug, type A
125
250
1 12
48
48
H-rail mounting PEV-W PEV-W Mounting via screw-in thread PEV-SW27 08 08 M5 M5 Plug M8x1, 4-pin Screw terminal, 4-pin For plug socket PEV--A-WD 30 30 10 10
1 10
250
250
14
PEV-SW27
1 10
250
250
14
1 +1.6
Gx
Plug, type A
125
250
VPEV
1 +1.6
Gx
48
48
H-rail mounting VPEV-W VPEV-W 1 0 1 0 M5 M5 Plug M8x1, 4-pin Screw terminal, 4-pin 30 30 10 10
1)
Internet: www.festo.com/catalogue/...
-H2
Note
The vacuum switch VPEV is used as a pressure switch by repositioning the blanking screw supplied from the pressure supply port to the vacuum port.
6 3 7 5 3
Mounting attachments and accessories 1 Angled plug socket with switching status display PEV Plug socket without switching status display MSSD Connecting cable NEBU-M12 Mounting plate APL 17 21 21 19
Page/Internet
Mounting attachments and accessories 4 5 6 7 Mounting frame NRRQ Push-in fitting QS Quick connector CK-x, LCK-x Blanking screw VPEV-x (included in scope of delivery of VPEV) 20 qs ck
Page/Internet
2 3
Internet: www.festo.com/catalogue/...
Pneumatic connection x Gx G
Generation B B series
Electrical connection M12 Plug, type A, rectangular design, to EN 175301-803 Plug M12x1, 4-pin, round design, to EN 60947-5-2
Plug socket OD Included in the scope of delivery Not included in the scope of delivery
Internet: www.festo.com/catalogue/...
PEV/VPEV--M12
PEV--B(-OD) EN 60947-5-1
PEV--SC-OD
PEV--B-M12
VPEV-x
VPEV-x-M12
CE marking (see declaration of conformity) Note on materials Input signal/measuring element Measured variable Method of measurement Pressure measuring range Operating pressure Operating medium [bar] [bar]
Note about the operating/pilot medium Temperature of medium [C] Ambient temperature [C]
Relative pressure Pneumatic/electric pressure transducer With setting scale 1 +1.6 1 12 1 +1.6 Compressed air to ISO 8573-1:2010 [7::] Compressed air to ISO 8573-1:2010 [7:4:4] Mineral oil Water Lubricated operation possible (required during subsequent operation) 20 +80 20 +80
Internet: www.festo.com/catalogue/...
PEV--B(-OD) Changeover switch 3 250 125 5,000 1 (at 24 V) 10 (at 10 V) 100 (at 5 V)
PEV--SC-OD
PEV--B-M12
VPEV-x
VPEV-x-M12
48 48 4,000
48 48 4,000
Electronic components Utilisation category for inductive load Utilisation category for ohmic load
Pin 1 2 3 4
Pin 1 2 3 4
Mechanical components Type Type of mounting Mounting position Pneumatic connection Product weight Housing material information Switch contact material information Display/operation Type Switching output Switching status display Threshold value setting range Threshold value setting range after conversion
1) LED is integrated in the supplied plug socket.
PEV--B(-OD)
PEV--SC-OD
PEV--B-M12
VPEV-x
VPEV-x-M12
[g]
220
Gx 240
220
PEV--SC-OD
PEV--B-M12
VPEV-x-M12
[bar] [bar]
[C] CRC1)
20 +80 IP65 2
Corrosion resistance class 2 according to Festo standard 940 070 Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or lubricating agents.
Internet: www.festo.com/catalogue/...
1 Switching point adjusting screw 2 Hex nut for adjustment of hysteresis (under protective cover) 3 Protective cover Type B1 _0.2
PEV--B: 4 Push-in connector M16x1.5 to EN 175301-803-A, choice of cable outlet by turning socket inset 4x90 B2 _0.1 D1 D2 _0.2 5.2
D3
H1 _0.6
H2
H3 _0.5
L1
L2 _0.2
PEV--B PEV--B-OD
30
20
min. 5
77.3
56 40
18.5
78 56
11
www.festo.com
1 Switching point adjusting screw 2 Hex nut for adjustment of hysteresis (under protective cover) 3 Protective cover 4 Push-in connector suitable for plug socket M16x1.5 to EN 175301-803-A 5 Scale for reading off the set switching pressure Type B1 _0.2 30 B2 _0.1 20 D1 D2 _0.2 5.2 D3 H1 _0.6 77.3 H2 H3 _0.5 18.5 L1 L2 _0.2 1 1
PEV--SC-OD
min. 5
40
56
11
Internet: www.festo.com/catalogue/...
1 Switching point adjusting screw 2 Hex nut for adjustment of hysteresis (under protective cover) 3 Protective cover 4 Connection arrangement for plug connector M12x1 to EN 60947-5-2 Type B1 _0.2 30 B2 _0.1 20 B3 D1 D2 _0.2 5.2 D3 H1 _0.6 77.3 H2 H3 _0.5 18.5 L1 L2 _0.2 1 1
PEV--B-M12
12.5
min. 5
40
55.4
11
www.festo.com
1 Switching point adjusting screw 2 Hex nut for adjustment of hysteresis (under protective cover) 3 Protective cover Type B1 _0.2 B2 _0.1
VPEV-x: 6 Push-in connector M16x1.5 to EN 175301-803-A, choice of cable outlet by turning socket inset 4x90 D4 H1 H2 H3 _0.1 H4 H5
B3 0.1 12.5
D1
D2 _0.2 5.2
D3
H6
L1
L2 _0.2
L3
VPEV-x VPEV-x-M12
30
20
Gx
min. 5
M12x1
98 91
48
32
5.5
91
18.5
78 55.4
10
11
Internet: www.festo.com/catalogue/...
175250
PEV--B-OD
161760
PEV--SC-OD
192488
PEV--B-M12
Vacuum switch Gx Plug, type A, rectangular design, to EN 175301-803 Plug socket included in scope of delivery Plug M12x1, 4-pin, round design, to EN 60947-5-2 150261 VPEV-x
Gx
192489
VPEV-x-M12
Internet: www.festo.com/catalogue/...
Type codes PEV-W Type PEV-W VPEV-W Pressure switch Vacuum switch KL LED GH
10
Internet: www.festo.com/catalogue/...
General technical data Type General Approval CE marking (see declaration of conformity) Note on materials
PEV-W C-Tick To EU EMC Directive1) Contains PWIS (paint-wetting impairment substances) RoHS-compliant
VPEV-W
Input signal/measuring element Measured variable Method of measurement Pressure measuring range [bar] Operating pressure [bar] Operating medium Note about the operating/pilot medium Temperature of medium [C] Ambient temperature [C]
1)
Relative pressure Pneumatic/electric pressure transducer 28 0.8 0.2 08 1 0 Compressed air to ISO 8573-1:2010 [7::] Lubricated operation possible (required during subsequent operation) 0 +60 0 +60
For information about the applicability of the component see the manufacturers EC declaration of conformity at: www.festo.com Support User documentation. If the component is subject to restrictions on usage in residential, office or commercial environments or small businesses, further measures to reduce the emitted interference may be necessary.
Electrical data Type Switching output Switching element function Max. switching frequency Max. output current Operating voltage range Electromechanical components Electrical connection Pin allocation Plug M8x1, 4-pin
PEV-W-KL
VPEV-W-S
VPEV-W-KL
Pin 1 2 3 4
Pin 1 2 3 4
Internet: www.festo.com/catalogue/...
11
[g]
VPEV-W
[bar] [bar]
PEV-W-KL IP20
VPEV-W-S IP65
VPEV-W-KL IP20
Corrosion resistance class 2 according to Festo standard 940 070 Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or lubricating agents.
Dimensions PEV-W-S/VPEV-W-S
www.festo.com
1 Slot for inscription label 2 Foot mounting (included in scope of delivery) Type PEV-W-S/VPEV-W-S PEV-W-KL/VPEV-W-KL B1 B2
3 Clamping foot for G/H rail 4 Switching status display, yellow B3 D1 D2 3.2 D3 H1 73.4 72 H2
18
8.8
M5
3.4
66
60
54
2.6
42
34.7 18.4
12
15.8 7.9
12
Internet: www.festo.com/catalogue/...
Vacuum switch M5 Plug M8x1, 4-pin Screw terminal, 4-pin 152617 152619 VPEV-W-S-LED-GH VPEV-W-KL-LED-GH
Internet: www.festo.com/catalogue/...
13
Electrical connection B-OD For angled plug socket PEV--A-WD For angled plug socket PEV--WD-LED-
14
Internet: www.festo.com/catalogue/...
General technical data General CE marking (see declaration of conformity) Input signal/measuring element Measured variable Method of measurement Pressure measuring range [bar] Operating pressure [bar] Operating medium Note about the operating/pilot medium Temperature of medium [C] Ambient temperature [C] Electrical data Switching output Switching element function Max. switching frequency Max. switching output voltage Max. output current Operating voltage range Electromechanical components Electrical connection Pin allocation PEV--A-SW27 Changeover switch 3 250 250 4,000 12 250 To EU Low Voltage Directive
Relative pressure Pneumatic/electric pressure transducer 1 10 1 10 Compressed air to ISO 8573-1:2010 [7::] Lubricated operation possible (required during subsequent operation) 20 +80 20 +100
Plug, 4-pin
Pin 1 2 4
PEV--A-SW27-B-OD
Pin 1 2 4
Mechanical components Type of mounting Mounting position Pneumatic connection Product weight Housing material information Screw-in Any G 90 Galvanised steel
[g]
Internet: www.festo.com/catalogue/...
15
Dimensions PEV--A-SW27
www.festo.com
1 Max. tightening torque 50 Nm 2 Integral plug connector to DIN 46244 Type PEV--A-SW27 PEV--A-SW27-B-OD B1 30 D1 D2 30 34 D3 26 H1 58 74 H2 0.2 8
1 Max. tightening torque 50 Nm 2 Integral plug connector to EN 175201-803 3 Switching-point adjustment H3 2 H4 1.3 1
27
Ordering data Pneumatic connection Pressure switch G For angled plug socket PEV--A-WD 159259 PEV--A-SW27 Electrical connection Part No. Type
175252
PEV--A-SW27-B-OD
16
Internet: www.festo.com/catalogue/...
General technical data Type CE marking (see declaration of conformity) Note on materials Electronic components Type Operating voltage range [V AC] [V DC]
PEV--WD-LED-24 15 30
Electromechanical components Electrical connection Acceptable current load Mechanical components Type of mounting Housing material information Display/operation Ready status display Switching status display Immissions/emissions Ambient temperature Protection Dimensions [C] 40 +90 IP65 Download CAD data www.festo.com Green LED Yellow LED Via through-hole PA [A] Angled socket, 4-pin 8
1 Inserts can be rotated 90 Dimensions and ordering data Type B1 PEV--24 PEV--230
B2
D1
D2 22.5
D3
H1
H2
L1
L2
L3
Weight [g] 34 34
30
27.5
M3
Pg11
53
43
34.2
5.5
1.5
Internet: www.festo.com/catalogue/...
17
General technical data Note on materials Electromechanical components Electrical connection Mechanical components Type of mounting Housing material information Immissions/emissions Ambient temperature Protection [C] 40 +90 IP65 Via through-hole PA Angled socket, 4-pin RoHS-compliant
Dimensions
www.festo.com
D3 Pg9
H1 44
L1 51
Weight [g] 55
Type PEV--A-WD
18
Internet: www.festo.com/catalogue/...
www.festo.com
B2
B3
D1
D2
H1 87.3 101 L7 22
H2
H3
H4
H5
L1
27
16
4.4
4.4
M4
10
7.7
88.5
L3
L4 82 81
L5
L6
L8
Weight [g] 18 18
80.8
74
75
24
2.3
Internet: www.festo.com/catalogue/...
19
www.festo.com
1 2 3 4 5
Connecting piece NRV-2N Profile rail NRQ-8-480 Mounting bracket NRW-12/3 Bolt NRB-12/60 Socket head screw DIN 84-M6X12-4.8 6 Socket head screw DIN 84-M6X18-4.8 B1 480 B2 12 D1 12 D2 M6 H1 60 H2 15.5 H3 14 H4 8 H5 2.4 H6 1.2 H7 6.2 L1 97 L2 88.6 L3 88.2 L4 44.5 L5 16 L6 8
Dimensions and ordering data Part No. Mounting frame complete for 16 elements Mounting bracket for mounting sub-bases to the frame 9365 11571 Type NRRQ-2N NRW-9/1,5-B
20
Internet: www.festo.com/catalogue/...
Ordering data Connecting cable NEBU-M8 Electrical connection M8x1, straight socket
Number of wires 4
Internet: nebu
2.5 5
Ordering data Connecting cable NEBU-M12 Electrical connection M12x1, straight socket
Number of wires 4
Internet: nebu
2.5 5
Length 2m
Internet: nrc
Length 2m
Internet: nrh
Ordering data Mounting latch PENV Description For mounting on mounting rail
Internet: penv
Internet: www.festo.com/catalogue/...
21