Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
BYK-345 BYK-348
BYK-346 BYK-349
BYK-347
Composition
BYK-345 BYK-347 BYK-348 BYK-349 BYK-346
Typical Properties
Density at 20C in g/ml BYK-345 BYK-346 BYK-347 BYK-348 BYK-349 1,04 Non-volatile matter in % 87,5 Effective substance in % 100 52 100 100 100 Flash point in C > 94 81 > 100 > 100 > 100
1,00 45 Solvents: Dipropyleneglycol monomethylether (48 %) 1,02 1,06 1,04 85 > 96 > 94
Values indicated in this data sheet describe typical properties and do not constitute specification limits. * The difference between effective substance and non volatile content is the synthesis excess of the low molecular weight polyether, which is determined with this measurement method as part of the volatile content.
Recommended Levels
% additive (as supplied) based upon total formulation BYK-345 BYK-347 BYK-348 BYK-349 BYK-346
0,05 - 0,5
0,1 - 1
Function
These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilization and they do not impair recoatability. These additives do not increase surface slip. If higher surface slip is required, the additional use of BYK-307 or BYK-333 (see data sheet S201) is recommended.
BYK-347
BYK-348
BYK-349
Special Note
These additives exhibit long term stability when used in coating systems with pH-ranges of 4-10. BYK-347, BYK-348 and BYK-349 may be used in systems without any organic co-solvents whereas BYK-345 and BYK-346 need a small amount of organic co-solvents (about 5% of the total solvent content) in order to avoid turbidity. In coating formulations that contain higher amounts of organic co-solvents the silicone surfactants show only reduced effectivity. For such formulations we recommend the use of BYK-307 and BYK-333 (see data sheet S201).
Page 2
0%
5%
15%
Page 3
BYK-Chemie GmbH P.O. Box 10 0245 46462 Wesel Germany Tel +49 281 670-0 Fax +49 281 65735 info@byk.com www.byk.com/additives
ANTI-TERRA, BYK, BYK-DYNWET, BYK-SILCLEAN, BYKANOL, BYKETOL, BYKOPLAST, BYKUMEN, DISPERBYK, DISPERPLAST, LACTIMON, NANOBYK, SILBYK and VISCOBYK are registered trademarks of BYK-Chemie. AQUACER, AQUAFLOUR, AQUAMAT, CERACOL, CERAFAK, CERAFLOUR, CERAMAT, CERATIX and MINERPOL are registered trademarks of BYK-Cera. This information is given to the best of our knowledge. Because of the multitude of formulations, production and application conditions, all the above-mentioned statements have to be adjusted to the circumstances of the processor. No liabilities, including those for patent rights, can be derived from this fact for individual cases. This data sheet replaces all previous issues - Printed in Germany