Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
09/2008
Operation speed in s
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.03
I/O Points
fP2
0.35s
A multifunctional PLC with a compact body. The FP2SH can execute a program of 20k steps in a scan time of 1ms.
fP2SH
0.03s
1600
384
The smart controller of the next generation. Mediumscale functionality provided in small size.
fP (Sigma)
0.32s
128
fP0
0.9s
fP-X
0.32s
Advanced compact model with high speed, large capacity and multifunction capability.
fP-e
14
Timer, counter, temperature controller, HMI and PLC in one unit.
0.9s
09/2008
Long-Life QuaLiTy
As with all Panasonic products, the PLCs undergo extremely rigorous testing during development that far exceeds the demands that will actually be placed on them. This is a guarantee for the long life of the product in the application.
ConTenTS:
Selection of products . . . . . . . . . . . . . . . . . . . . . . . . 25 Networking technology . . . . . . . . . . . . . . . . . . . . . . . 67 FP0 series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 812 FP (Sigma) series . . . . . . . . . . . . . . . . . . . . . . . 1315 FP-X series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1619 FP-e series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2021 FP2 series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2228 FP Web-Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 FP Modem-EU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Programming software FPWIN Pro . . . . . . . . . . . . . . 31 FP OPC server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 FP Data Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Control CommX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 GT series operator terminals . . . . . . . . . . . . . . . . . . . 35
09/2008
High performance ultra-compact controller Reliably supports the control of higher speed equipment with more functions featured
Excellent basic performance, including program capacity of 32k steps, operation speed of 0.32s/step, and 384 I/O points Built-in two-axis 100kHz pulse output capable of interpolation control Positioning units capable of controlling network servomotors Can be equipped with up to three ports for general-purpose serial communication Compatible with PROFIBUS, DeviceNet, and other open field networks
Features
Motor control by the built-in pulse output Heater control by the PWM output Serial communications by the RS232C/RS485 port
CPU (control unit) model Maximum controllable I/O points Connectable expansion units Program capacity Comment memory Operation speed Data register Internal relay Ethernet PROFIBUS DP DeviceNet CANopen Modbus-RTU Network compatibility CC-Link Computer link (MEWTOCOL) General-purpose serial (nonprocedural) PLC link W W0 W2 VE Remote I/O (MEWNET-F) S-LINK Built-in pulse output Motor control Positioning unit PWM output High-speed counter
Analog measurement
2.7k steps N/A 0.9s/step (basic instructions) 1660 words 1008 points (63 words) A (with FP Web-Server 2) N/A N/A N/A A (RS485 type) N/A A (Tool port, COM port) A (COM port) N/A N/A N/A N/A N/A N/A 2 axes/10kHz N/A 2 points/1kHz/1000 resolution 4 ch/10kHz N/A N/A N/A 2 ch (thermocouple) 4 ch/5kHz 2 axes/5kHz
2.7k steps
5k steps N/A
10k steps
32k steps A (Built-in memory) 0.32s/step (basic instructions) 32,765 words 4096 points (256 words) A (with FP Web-Server 2) A (Slave, FNS unit; master FMU) A (Slave, FNS unit; master FMU) A (Slave, FNS unit; master FMU) A (RS485 communication cassette) A (Slave, CC-Link unit) A (Tool port, communication cassette) A (Tool port, communication cassette) N/A A (RS485 communication cassette) N/A N/A A (64-point slave stations, I/O link unit) A (S-LINK unit) 2 axes/100kHz (Transistor output type) 2-axis/4-axis type unit, up to 16 axes 2 points/12kHz/1000 resolution (Transistor output type) 4 ch/50kHz 8 ch/unit 4 ch/unit 2-ch input and 1-ch output mixed unit
1008 points (63 words) A (with FP Web-Server 2) Slave N/A N/A N/A A (Slave, CC-Link unit) A (Tool port, COM port) A (COM port) N/A N/A N/A N/A A (64-point slave stations, I/O link unit) A (FP0-SL1 control unit) 2 axes/10kHz (C16,C32,T32) N/A 2 points/1kHz/1000 resolution (C16, C32, T32) 4 ch/10kHz 8 ch/unit 4 ch/unit 2-ch input and 1-ch output mixed unit
8 ch thermocouple unit, 6 ch RTD unit A (T32 only) Compatible with RS485 using C-NET adapter
09/2008
model
fP-X
fP2
fP2SH
High performance compact terminal-block type controller Wide selection of add-on cassettes allows space-saving use of the controller for a variety of purposes Features
Up to three add-on cassettes can be attached to the top of the control unit. The unit is of the terminal block type, but is space-saving and allows a variety of applications. Ethernet cassette available for data collection Built-in four-axis pulse output. Two axes for linear interpolation Comment memory for simple maintenance work USB port for direct connection to a PC
Standard of the compact medium-scale class Loaded with positioning and networking functions controller for a variety of purposes
Compact body of 140 x 100mm (WxH) (five modules) Wide selection of positioning units RTEX: Compatible with wire-saving network servomotors Multifunction type: Super-quick startup in 0.005ms Interpolation type (to be released): Three-axis helical interpolation, two-axis synchronization Compatible with Ethernet, CANopen, PROFIBUS, DeviceNet, CC-Link, and various other open field networks C1 C1D 2048 points 32 units (when the H type backplane is used) 16k steps (32k steps with expansion memory) A (optional memory) 0.35s/step (basic instructions) 6000 words (Exc. file register. See the end of this table.) 4048 points A (ET-LAN unit) A (Slave, FNS unit; master FMU) A (Slave, FNS unit; master FMU) A (Slave, FNS unit; master FMU) N/A N/A A (COM port, CCU, MCU) A (COM port, SDU, MCU) A (MW link unit) A (MCU) A (MW link unit) N/A A (Master: MW link unit) (Slave: RMS unit) A (FP2-C1SL, S-LINK unit) N/A RTEX, multifunction type, interpolation type 4 points/30kHz/100 resolution (Pulse I/O unit) 4 points/200kHz (FP2-HSCT, FP2-PXYT) 8 ch (FP2-AD8VI, FP2-AD8X) 4 ch (FP2-DA4) 8 ch thermocouple/RTD (FP2-AD8X, FP2-RTD) A (optional memory EM1, EM2, EM3) File register (0 to 14,333 words) C1SL
Scan time: 1ms/20k steps Advanced version of FP2 capable of ultrahigh speed processing
Ultra-high speed model that shares units with FP2, ideal for high-speed control of electronic device manufacturing equipment High program capacity of 120k steps 60k step type also available Compatible with Small PC Cards, which serve as a program backup or extended memory for processing a large volume of data 8192 I/O points max. (remote I/O system)
CPU (control unit) model Maximum controllable I/O points Connectable expansion units Program capacity Comment memory Operation speed Data register Internal relay Ethernet PROFIBUS DP DeviceNet CANopen Modbus-RTU Network compatibility CC-Link Computer link (MEWTOCOL) General-purpose serial (nonprocedural) PLC link W W0 W2 VE Remote I/O (MEWNET-F) S-LINK Built-in pulse output Motor control Positioning unit PWM output High-speed counter
Analog measurement
C2
C2P
C3P
2048 points (8192 points with remote I/O system) 32 units (when the H type backplane is used) 32k steps A (built-in memory) 0.03s/step (basic instructions) 10,240 words (Exc. file register. See the end of this table.) 14,192 points A (ET-LAN unit) A (Slave, FNS unit; master FMU) A (Slave, FNS unit; master FMU) A (Slave, FNS unit; master FMU) N/A N/A A (COM port, CCU, MCU) A (COM port, SDU, MCU) A (MW link unit) A (MCU) N/A A (VE link unit) A (Master: MW link unit) (Slave: RMS unit) A (S-LINK unit) N/A RTEX, multifunction type, interpolation type 4 points/30kHz/100 resolution (Pulse I/O unit) 4 points/200kHz (FP2-HSCT, FP2-PXYT) 8 ch (FP2-AD8VI, FP2-AD8X) 4 ch (FP2-DA4) 8 ch thermocouple/RTD (FP2-AD8X, FP2-RTD) A (built-in type) File register (32,765 words, 3 banks)
8 units + add-on cassettes (up to 3) 16k steps 32k steps A (built-in memory) 0.32s/step (basic instructions) 12,285 words 32,765 words
4096 points (256 words) A (Ethernet communication cassette) N/A N/A N/A A (RS485 communication cassette) A (Slave, FP0 CC-Link unit) A (Tool port, communication cassette) A (Tool port, communication cassette) N/A A (RS485 communication cassette) N/A N/A A (64-point slave stations, FP0 I/O link unit) N/A 2 axes/100kHz + 2 axes/20kHz (transistor output type) 1 axis/100kHz (pulse I/O add-on cassette) 4 points/12kHz/1000 resolution (transistor output type) 8 ch/50kHz 2 ch/cassette 2 ch/cassette 2-ch input and 1-ch output mixed cassette
09/2008
FP2SH
FP0
FP
FP-X
PROFIBUS-DP DeviceNet
CANopen
PROFIBUS-DP DeviceNet
CANopen CC-Link
Connectable as masters
Connectable as slaves
FP2
FMU
FP
FMU
FP2 FP2SH
FP
FP2 FP2SH
FPX
FP0
MEWNET-W0
MEWNET-W2
MEWNET-W
FP-X
FP
FP2 FP2SH
FP2 FP2SH
FP2 FP2SH
FP2 FP2SH
FP2 FP2SH
Remote I/O
(Bit processing) MEWNET-F S-LINK
FP2 FP2SH
C-NET (RS485)
1:N serial communications
C-NET
FP-X
FP
FP0
FP-e
KT Temperature Controller
KW Eco-Power Meter
RS232C
1:1 serial communications RS232C
GT Display
PV Imagechecker
09/2008
Transmission cable
UTP cable or transceiver cable CC-Link dedicated cable (twisted pair cable) Type A cable for PROFIBUS-DP (twisted pair cable)
Transmission speed
10Mbps/ 100Mbps
Transmission distance
Max segment: 500m Max. distance between nodes: 2500m
Supported function
PLC links MasterSlave Remote I/O systems Computer link FP2SH
Compatible PLCs
FP2 FP-X FPS (Sigma) FP0 FP-e
Ethernet
N/A
N/A
CC-Link
10Mbps (100m) 5Mbps (160m) 2.5Mbps (400m) 625kbps (900m) 156kbps (1200m)
N/A
N/A
N/A
N/A
N/A
12Mbps
N/A
N/A
A (Master/slave)
N/A
N/A
DeviceNet
N/A
N/A
A (Master/slave)
N/A
A (Master/ slave)
N/A
N/A
CANopen
Twisted-pair shielded cable Also compatible with fourwire power bus cables.
N/A
N/A
A (Master/slave)
N/A
A (Master/ slave)
N/A
N/A
Twisted-pair cable
115 kbps
1200 m
N/A
N/A
N/A
N/A
N/A
MEWNET-W2 MEWNET-W
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
MEWNET-F
500kbps
N/A
N/A
N/A
N/A
S-LINK
28.5kbps
N/A
N/A
N/A
N/A
N/A
Serial communications
C-NET (RS485)
19,200bp/ 9600bps
1200m
N/A
N/A
CCU (RS232C)
RS232C
19200bp/ 9600bps
15m
N/A
N/A
2400kbps
N/A
N/A
09/2008
CO M PACT BO DY 09/2008
fP0 series
Incredibly small, as single or even as multiple combined units
feaTureS
Measures only 25 x 90 x 60mm (WxHxD)
Industrys smallest class ideal for installation in equipment and size reduction of control panels * The 32-point type control unit is 30mm wide. The stacking connector allows a base-less expansion. Even when three expansion units are added to the control unit, the total width is as small as 105mm.
A wide variety of analog converter units ideal for measurement or temperature control
The lineup includes an 8-ch A/D converter unit, 4-ch D/A converter unit, mixed 2-ch A/D and 1-ch D/A converter unit, 4-ch and 8-ch type thermocouple units. Control of up to 24 ch of analog data is possible.
Performance specifications
Model Programming method/ Control method Number of I/O points No expansion (control unit only) W/expansion 1
*Same type of control and expansion units Max. 58 points Max. 62 points Max. 112 points Max. 128 points Expansion section: Max. 96 points Max. 106 points Max. 110 points Max. 112 points Max. 128 points Max. 128 points Max. 128 points 10 points [Input: 6, relay output: 4] 14 points [Input: 8, relay output: 6] C10 series (Relay output type only) C14 series C16 series C32 series (Relay output type only) (Transistor output type only) (Transistor output type only) Relay symbol/Cyclic operation 16 points [Input: 8, PNP output: 8] 32 points [Input: 16, PNP output: 16] S-LINK section: max. 128 points [Input: 64, PNP output: 64] 32 points [Input: 16, NPN output: 16] S-LINK type T32 series (Transistor output type only)
W/expansion 2
*Mix type of relay and transistor units
EEPROM (no back-up battery required) 5000 steps 0.9s/step (basic instruction) 83 115 0.9s/step (for basic instruction) 1008 points 144 points 1660 words 2 words 32 64 Unlimited 128 16 1 phase / 4 points (10kHz) or 2 phases / 2 points (2kHz in total)*) 2 points (output frequency up to 10kHz) 0.15Hz to 38Hz (ver. 2 or later: 1kHz max.) 6 inputs (catches pulses of 50s) 7 programs (external 6 inputs + periodical interrupt) 0.5ms to 30s Available One RS232C port is mounted on each of the models FP0- C10CR, C14CR, C16CT, C32CT, T32CT and SL1 type (3P terminal block) Transmission speed (Baud rate): 300 to 19,200bit/s, Transmission distance: 3m Communication method: half duplex Stored program and system register in EEPROM Backup is provided by secondary battery. The holding range for the timers, counters, internal relays, and data registers are specified with the programming tool. 1 program (internal 1 point) Available (same as 32 points series) 704 100 255 6144 words 16,384 words 10,000 steps
Basic High-speed Internal relay (R) Timer/Counter (T/C) Data register (DT)
Index register (IX,IY) Master control relay points (MCR) Labels (JMP + LOOP) Differential points Number of step ladder Number of subroutines High speed counter Pulse output PWM output Pulse catch input/ Interrupt input Interrupt program Periodical interrupt Constant scan RS232C port Program and system register
Stored fixed area in EEPROM Counter: 4 points Internal relay: 32 points Data register: 8 words
Memory back up
Maintenance
Operation memory
Stored fixed area in EEPROM Counter: 16 points Internal relay: 128 points Data register: 32 words Watchdog timer, program syntax check Not available Run time editing, password setting
Available
09/2008
fP0 series
A wide variety of both single and combined units
Control units
relay output type Transistor output type
32 points Input Output 16 points 16 points FP0-C32CPA (PNP) FP0-C32CTA (NPN) with 2nd RS232C
FP0-C10RSA
FP0-C14RSA
fP memory Loader
afP8670
ead or write programs R (up to 60k steps) from or to a PLC ersonal computer is not P required pplicable with FP0, FP-e, A FP (Sigma), FP-X, FP2 and FP2SH
FP0T32CPA (PNP) with 2nd RS232C FP0T32CTA (NPN) with 2nd RS232C
Control u nit
from 10 i/os
up to 128 i/os
Expansio
n unit
25mm
The photo shows an example of expanding by adding three expansion units to an I/O 32-point control unit.
90mm
input/output terminal The photo shows an I/O 14-point control unit. This size is uniform for all except the I/O 32-point control unit. Com port: 2nd rS232C interface (optional for all CPU units for serial communication)
TooLport Hooks up by using the programming software Panasonic Control FPWIN Pro or FPWIN GR and a single cable.
10
09/2008
fP0 series
A maximum of 3 expansion units can be added to the CPU unit
digital i/o units
relay output type input only type Transistor output type
8 points Input Output 4 points 4 points FP0-E8RSA option Output 8 points FP0-E8YRSA
FP0-A21A
nput (12 bit): I 10V, 0 5V, 0 20mA utput (12 bit): O 10V, 0 20mA
4 20mA
10V
, J, T, R type thermocouples K can be used esolution: 0.1C R ccuracy: .8C (R type: 3C) A 0 emperature range: T -100 to 1500C
networking units
ethernet fPweB2 (Web-Server Unit) ProfiBuS fP0-dPS2 (DP Slave) mewneT-f fP0-ioL (MEWNET-F Slave)
easy expansion
The expansion unit can be attached easily without any cables to the control unit. Special expansion cables, backplanes, and so forth, are unnecessary as the expansion unit employs a stacking system that uses expansion connectors and lock levers on the surface of the unit itself.
09/2008
Expansion unit Expansion unit Expansion unit
Control unit
11
fP0-PSa2 / fP-PS24-050e
24VDC power supplies
features
E incredibly small size: E multiple voltage input: E global approvals
FP0 power supply: FP power supply: FP0 power supply: FP power supply:
30.4mm
85 to 265VAC
E optimal protection:
fP0-PSa2 115/230VAC 85 to 265VAC 50/60Hz 40 to 70Hz < 50A at 55C 145mA (at 230VAC and 0.7A output current) PROTECTED 24VDC 23.5V to 24.5VDC 0.7A 0 to 0.7A < 60mVpp Electronic, automatic restart mode Yes Yes (switch off at approx. 0.8A and more) Min. 20ms at 230VAC
fP-PS24-050e
90mm
< 50A at 25C/< 70A at 55C 400mA (at 230VAC and 2.1A output current)
2.1A 0 to 2.1A < 240mVpp Continuous Yes (switch off at approx. 3.5A and more) Min. 110ms at 230VAC Yes
Output ripple Short circuit protected Over voltage protected Over load protected Holding time Power OK signal
general specifications
Ambient temperature Storage temperature Ambient humidity 115mm Storage humidity Vibration resistance Shock resistance Life time min. Mounting Size Input connection AC side Output connection DC side Status display Efficiency
NOTES: 1) Mounting distance between the FP0 power supply and the FP0 CPU is needed to permit heat radiation for the FP0-CPU 2) For side mounting, 2 additional blue clips are needed: order part-no. 677021-17101 (1pce.) for FP0-PSA2 3) Mounting distance between the power supply FP-PS24-050E and other devices is needed for cooling/ heat radiation.
0C to +55C -20C to +70C 5 to 95% non-condensing 5 to 95% non-condensing 10 to 55Hz, 1 cycle/min.: double amplitude of 0.75mm, 10 min. on 3 axes 10g min., 4 times on 3 axes 7 years at nom. load, 25C ambient temperature, 20,000h at 55C with full load/continuous operation DIN rail or FP0 flat attachment plate 90 x 60 x 30.4mm MC connector, 2 pin MC connector, 6 pin, 3 pin for + and 3 pin for - 80% DIN rail 115 x 75 x 42mm 2 pin 5 pin, 2 pin for + and 2 pin for -; 1 pin Power OK 85%
LED (green) at the front side for the secondary voltage indication
Standards
EMC LVD Others Protection EN 50082-2, EN50082-1, EN 50081-2, EN 50081-1 EN 60950, EN 50178 (overvoltage category 3) EN 55011/B, EN 55022/B, EN 61000-4-2, -4-3, -4-4, -4-5, -4-6, -4-11 EN 60950, EN 50178 (overvoltage category 2)
UL recognized according to UL 508, UL 1950, cUL recognized according to CAN/CSA-C22.2 No. 950.95 IP30 IP20 outside/IP67 inside
12
09/2008
fP (Sigma)
The next generation compact PLC
feaTureS
Abundant program capacity 32k steps
The 32k step program capacity can accommodate an increase in the number of programs accompanying functionality enhancements, expansions, or changes of equipment. All of 100,000 I/O comments, 5000 lines of line-space comments, and 5000 lines of remark comments are saved in FPS (Sigma) together with programs. Equipped with a RISC processor, achieving high-speed processing with a scan time of less than 2ms for 5000 steps.
Equipped with an independent comment memory Equipped with a high-speed RISC processor
The 4Mbps maximum frequency and startup speed of 0.005ms allow use for linear servo control. A temperature control program can be written in only one line by using the PID F356 (EZPID) instruction, facilitating temperature control by a PLC, which had previously been considered difficult.
Performance specifications
Part number Number of I/O points 32k type 12k type (discontinued in 2008) FPG-C32T2H-A FPG-C32T2HTM
32 points (DC input: 16, PNP output: 16) Max. 128 points (up to 3 units) When using transistor output type expansion units Max. 288 points (up to 4 units) When using transistor output type expansion units Max. 384 points When using transistor output type expansion units
FPG-C24R2H-A FPG-C24R2HTM
24 points (DC input: 16, relay output: 8) Max. 120 points (up to 3 units) When using transistor output type expansion units Max. 280 points (up to 4 units) When using transistor output type expansion units Max. 376 points When using transistor output type expansion units Relay symbol/cyclic operation Built-in flash ROM (without backup battery) 32k steps (32k type), 12k steps (12k type) 93
FPG-C28P2H-A FPG-C28P2HTM
28 points (DC input: 16, PNP output: 12) Max. 124 points (up to 3 units) When using transistor output type expansion units Max. 284 points (up to 4 units) When using NPN output type expansion units Max. 380 points When using NPN output type expansion units
Control unit
With FP0 expansion units With FPS (Sigma) expansion units With FP0 and FPS (Sigma) expansion units
216 Basic instruction: 0.32s/step (32k type), 0.4 s/step (12k type) 4096 points (32k type): R0 to R255F, 1568 points (12k type): R0 to R97F
1)
218
Operation speed
Relay 1024 points
1) 2)
Timer/Counter (T/C) Link relays (L) Data register (DT) Link data register (LD)
(for initial setting, timer: 1008 points (T0 to T1007), counter: 16 points (C1008 to C1023) Timer: Counts each unit up to 32767 times (units: 1ms, 10ms, 100ms, or 1s). Counter: Counts 1 to 32,767 2048 points (32k type), 1024 points (12k type) 32,765 words (DT0 to DT32764)
1) 1) 1)
Memory area
256 words (32k type), 128 words (12k type) 14 words (I0 to ID) 256 256 Unlimited 1000 stages 100 8 points (X0 to X7)
Index register (IX,IY) Master Control Relay points (MCR) Labels (JMP + LOOP) Differential points Number of step ladder Number of subroutines Pulse catch input Interrupt program Self-diagnostic function Clock/Calender function Potentiometer (Volume) input Battery life Comment storage Link function Other functions Linear/Circular interpolation for positioning
9 programs (8 external input points (X0 to X7), 1 periodical interrupt point '0.5ms to 30s') E. g. watchdog timer, program syntax check Available (year, month, day, hour, minute, second and day of week); however, this function can only be used when a battery has been installed 3). 2 points, resolution: 10 bits (K0 to K1000) 220 days or more (actual usage value: approx. 840 days (25C). Suggested replacement interval: 1 year. Value applies when no power at all is supplied. All kinds of comments, including I/O comments, remarks, and block comments, can be stored (without backup battery). Computer link (1:1, 1:N)
4)
4) 5)
PLC link
6)
Program edition during RUN, constant scan, forced on/off, password, floating-point operation, and PID processing Available Not available Available
Notes: 1) If no battery is used, only the fixed area is backed up (counters 16 points: C1008 to C1023, internal relays 128 points: R900 to R97F, data registers 55 words: DT32710 to DT32764). When the optional battery is used, data can be backed up. Areas to be held and not held can be specified using the system registers. 2) The number of points can be increased by using an auxiliary timer. 3) Precision of calendar timer: - At 0C 32F, less than 119 seconds error per month. - At 25C, less than 51 seconds error per month. - At 55C, less than 148 seconds error per month.
4) An optional communication cassette (RS232C type) is required in order to use 1:1 communication. (Re-send processing is recommended.) 5) An optional communication cassette (RS485 type) is required in order to use 1:N communication. (Re-send processing is recommended.) 6) An optional communication cassette (RS485 type) is required. The number of points actually available for use is determined by the hardware configuration.
09/2008
13
fP (Sigma) CPus
Outstanding performance in a compact design
fPS (Sigma) Transistor output type fPS (Sigma) relay output type fPS (Sigma) i/o expansion units
up to 384 i/o!
Parallel expansion BUS
14
09/2008
fPg-dPv1-m
fPg-Can-m
fPg-dev-m
fPg-SL
fPg-CCSL
2-axis fPg-Pn2an
4-axis fPg-Pn4an
8-axis fPg-Pn8an
Simplifies multi-axis high precision positioning with Panasonic Minas A4N network servo drives.
1 channel RS232C 2 channels RS232C 1 channel RS485 1 channel RS232C & 1 channel RS485
AFPN-AB6200: PROFIBUS plug-in unit AFPN-AB6201: DeviceNet plug-in unit AFPN-AB6218: CANopen plug-in unit
09/2008
15
XXXXXXXX
xxxxxxxxxxx xxxxx
16
09/2008
fP-X series
An advanced compact model
feaTureS
Abundant program capacity 32k steps
The 32k step program capacity can accommodate an increase in the number of programs accompanying functionality enhancements, expansions, or changes of equipment. All of 100,000 I/O comments, 5000 lines of line-space comments and 5000 lines of remark comments are saved in FP-X together with programs. Equipped with a RISC processor, achieving high-speed processing with a scan time of less than 2ms for 5000 steps.
Equipped with an independent comment memory Equipped with a high-speed RISC processor
Add-on cassettes can expand the functionality, maintaining the space-saving size
Up to three add-on cassettes can be attached to the control unit. Functionality can be enhanced without increasing the required footprint. The 16 types of add-on cassettes, including the communication and analog types, cover a wide variety of applications.
The transistor output type controller has a built-in pulse output that allows multi-axis control of the servo and stepping motors. C14: 3 axes, C30/C60: 4 axes.
Program protection with an 8-digit password and a function prohibiting uploads easy direct connection with a PC via a commercial uSB cable (aB type)
PLC type
Number of inputs Number of outputs Output capacity Max. number of digital I/O Max. number of analog I/O Processing speed Memory Memory type Program capacity Data register Special functions
afPX-C14
8 6 relays or transistors 366
afPX-C30
16 14 relays or transistors Relay outputs: 2A, transistor outputs: 0.5A 352 26 0.32s/step (basic instruction) Built-in Flash ROM C14: 16k steps, C30/C60: 32k steps C14: 12,285 words, C30/C60: 32,765 words Input of main unit: Transistor output types: Single-phase 8ch (50kHz x 4ch + 10kHz x 4ch), Two-phase 4ch (35kHz x 1ch, 25kHz x 1ch, 5kHz x 2ch) Relay output types: Single-phase 8ch (10kHz x 8ch), Two-phase 4ch (5kHz x 4ch) Input of pulse I/O cassette AFPX-PLS (for relay output types): Single-phase: 2 channels 80kHz or 4 channels 50kHz Two-phase: 1 channel: 30kHz or 2channels: 25 kHz
afPX-C60
32 28 relays or transistors 382
High-speed counter
Pulse output Serial interfaces Real-time clock Other functions Operating voltage range
Built-in transitor outputs: 100kHz x 2ch + 20kHz x 2ch Pulse I/O cassette AFPX-PLS (for relay output types only): One unit (one axis) 100kHz, or two units (two axes) 80kHz Up to 3 serial interfaces, C30/C60 also USB port Available when AFPX-MRTC installed Password (4 digits, 8 digits), upload protection, comment storage (328kByte) 85 to 264VAC (AC power), 20.4 to 28.8VDC (DC power)
09/2008
17
fP-X series
High adaptability
add THe CaSSeTTeS you need To meeT your individuaL needS
The add-on cassettes can easily be mounted onto the control unit, up to 2 cassettes on the C14 or 3 cassettes on the C30/C60. By using one communication cassette, which can be stacked on top of another expansion cassette, even the FP-Xs communication can be expanded.
BuiLT-in 4-aXiS PuLSe ouTPuT: 2-aXiS Linear inTerPoLaTion SimuLTaneouSLy in Two SeTS
The transistor output type C14 comes with 3-axis while C30/60 comes with 4-axis pulse output inside the control unit. The multi-axis control, which previously required a higher-level PLC or additional positioning unit, or two or more PLC units, can now be achieved with only one FP-X transistor output type unit in a small space at a low cost. FP-X transistor output type is capable of simultaneously controlling 2-axis linear interpolation, for the first time in the industry with a compact pulse-output PLC.
THe maSTer memory CaSSeTTe maKeS TranSferring a Program eaSy, and a reaL-Time CLoCK iS aLSo inCLuded
The built-in 1MB flash-ROM can store a 32k step program as well as the comments of FPWIN Pro source file. The master memory cassette allows you to conveniently update a program on an FP-X in the field. Because the master memory cassette can store password information, you can easily enjoy all the security features the FP-X offers even when transferring program in the field. The built-in real-time clock enables repeated periodical control and data logging.
To the field operation Master memory
Before
PC
FP1
afPX-C30/C60 AFPX-C30R/C60R
The conventionalRS232C port rS232C The conventional can also also be used port can be used
18
09/2008
fP-X series
Product lineup
THe HigHLy eXPandaBLe LineuP SaTiSfieS a wide range of demandS
Control unit
dC power supply afPX-C14rd
8-point input of 24VDC Program capacity: 16k steps 6-point output of 2A relay 2-point potentiometer
expansion unit
relay ouput
afPX-e16r
Remarks: 2 or more E16s cannot be connected serially because they cannot supply the power to other units. 8-point input of 24VDC 8-point output of 2A relay
add-on cassette
application cassette afPX-in4T3 afPX-in8 afPX-Tr8 afPX-Tr6P
Input/output cassette (4-point input of 24VDC, NPN 0.3A/3-point output of 24VDC) Input cassette (8-point input of 24VDC) Output cassette (NPN 0.3A/8-point output of 24VDC) Output cassette (PNP 0.5A/6-point output of 24VDC) Pulse I/O cassette (High-speed counter input: single phase 80kHz 2ch, 2-phase 30kHz 1ch) (Pulse output: 1 axis 100kHz < CW/CCW, pulse + sign >) *Cannot be built into a transistor output type. Analog input cassette (2 points, 0 to 10 V/0 to 20mA 12-bit non-insulated) Analog I/O cassette Input: 2ch (0 to 5V/0 to 10V or 0 to 20mA 12-bit insulated) Output: 1ch (0 to 10V or 0 to 20mA 12-bit insulated) Analog output cassette 2ch (0 to 10V or 0 to 20mA 12-bit insulated 2ch) Thermocouple input cassette, (K/J type, resolution: 0.2C, insulated 2ch) Master memory cassette with a real-time clock* (32k steps program memory + real-time clock in year/month/day/hour/minute) *Real-time clock requires an optional battery. (Real-time clock Calendar timer)
afPX-PLS
afPX-Com6
afPX-mrTC
09/2008
19
fP-e series
Timer, counter, hour meter, temperature controller and PLC in one unit
features
5-character, 2-line, 3-color display Front operation switch Equivalent to FP0-C14 intelligence of small PLCs Easy programming using wizard Smooth debug Panel mounted type
PV
PROG.
PROG.
Displays any characters and numerical values, and numerical data can be changed.
Can also display characters and numerical values. Operation switches can be used for input.
Operation memory in the controller can be monitored and its data can be changed.
Specifications
Performance specifications
Model Number of I/O points Control unit
Front switch input AFPE224300 Basic type (RS232C) AFPE224302 Basic type (RS485) AFPE224305 Calendar timer type (RS232C) AFPE214325 Thermocouple input type (RS232C) AFPE214322 Thermocouple input type (RS485)
14 points [Input: 8, Output: 6 (Tr. NPN: 5/Ry: 1)] 8 points Built-in EEPROM 2720 steps 0.9s/step (for basic instruction)
Program Built-in memory memory Program capacity Processing speed Clock/Calender function Battery life Pulse catch input/ Interrupt input COM port note Periodical interrupt High speed counter Special functions
* The combination of 1-phase x 2ch and 2-phase x 1ch is also possible for the highspeed counter.
Available (year, month, day, hour, minute, second and day of week). However, this can only be used when a battery has been installed. 220 days or more (actual usage value: approx. 870 days (25C) (Periodic replacement interval: 1 year) (Value applies when no power is supplied at all.) 6 points in total (X0 and X1: 50 s, X2 to X5: 100 s)
RS232C
RS485
RS232C
RS485
Pulse output
2 independent points (Y0 and Y1) (No interpolation function) 40Hz to 5kHz (Y0/Y1: 2-points) 2 points (Y0 and Y1) Frequency: 0.15Hz to 1kHz Duty: 0.1% to 99.9% 40Hz to 5kHz (1-point) 40Hz to 2.5kHz (2-points)
20
PWM output
09/2008
fP-e series
Optimized for a wide range of applications
equipped with rS485 and rS232C interfaces
up to 99 computer link stations possible with rS485 (rS485 type) Up to 32 computer link stations are possible using a C-NET adaptor and up to 99 are possible using a commercially available adaptor. You can easily monitor operation status or perform control.
ComPuTer LinK
Personal Computer Personal Computer RS232C RS232C FP-e FP-e FP-e FP-e FP-eFP-e FP-e FP-e FP-e FP-e RS232C RS232C RS232C Commercially available adapter Commercially FP-e FP-e FP-e FP-e FP-e FP-e FP-e FP-e RS232C RS232C Computer Personal Personal Computer Personal Computer Personal Computer Personal Computer Personal Computer FP-e FP-e RS232C FP-e FP-e
Personal Computer Personal Computer Personal Computer Personal Computer Image Processing Device, etc. Image Processing Device, etc. Image Processing Image Processing FP-e Device, etc. FP-e Device, etc. RS232C RS232C RS232C RS232C
+ -
RS232C RS232C
+ + + -
TooL PorT
RS485 RS485 RS232C RS232C
Com PorT
RS232C RS232C
+ + -
RS485 Commercially Commercially available adapter available available adapter RS485 adapter
Two-point K-type thermocouple (-30 to 300C) connection possible (equipped with thermocouple input) Can be used in place of a temperature controller or used to control them. FP-e
FP-e FP-e FP-e
Pid instruction function High-performance temperature control can be achieved with PID instruction.
Y0
Y0PID instruction
PID instruction
Y0 Y0
A0
A0
Thermocouple input
Temperature Temperature Temperature Temperature As a controller, FP-e FP-e controller etc. KT4controller, etc. KT4etc.Up to 32 controller, etc. controller, KT4 KT4 for temperature controllers controllersto KT4 KT4 Up 32 RS485
SV1 SV2 TX/RX AT OUT2 SV1 SV2 TX/RX AT OUT2 SV
MODE
OUT
SV
OUT2
OUT2
OUT2 SV SV A1
OUT2
A1
OFF
MODE
OUT
A1
SV
SV
OFF
A1
A1
A1
EVT
EVT
SV1
SV2
TX/RX
AT
SV1
SV2
TX/RX
AT
SV1
SV1 SV2
SV2 TX/RX
TX/RX AT
EVT AT
EVT
SV1
SV1 SV2
SV2 TX/RX
TX/RX AT
EVT AT
EVT
MODE
OUT
OFF
MODE
OUT
OFF
MODE
OUT MODE
OUT
OFF
OFF
MODE
OUT OFF
PV
PV
OUT1
PV
OUT1
PV
OUT1
KT4 KT4
OUT1
OUT2
OUT2
Up A0 Up to to 32 32 controllers controllers
A0
* Compatible with MODBUS, it canitbe used used slave. * Compatible with MODBUS, can be as a as a slave.
* Compatible withKT4 KT4 KT4 Compatible with a slave. MODBUS,*it can be used asMODBUS, can bebe used as slave. KT4 * Compatible with MODBUS, it it can used as a a slave. Up toUp to 32 32 controllers controllers RS485 RS485
MODE OFF MODE OUT MODE OFF OFF MODE OUT OFF
OUT
OUT
Pulse output function The unit comes equipped with 2 channels for pulse output of up to 10kHz pulses. Since these two channels can be separately controlled, the FP-e outputalso suitable for 2-axis independent is Pulse Motor positioning. Y0 Pulse output Pulse output
Y2
CW/CCW output Y0
Y2
CW/CCW output
Y2 Y2
MotorMotor driverdriver 1 1
Stepping motor Servo motor Stepping motor Servo motor Motor Motor driver driver 2 2
Y1 Y3
Y3
CW/CCW output
Motor Pulse output Y1Pulse outputStepping Y1driver 2 Stepping motormotor Motor Servo motor CW/CCW Servo driver 2output CW/CCW output motor
Y3 Y3
MotorMotor driverdriver 2 2
09/2008
21
XXXXXXXX
xxxxxxxxxxx xxxxx
22
09/2008
fP2 series
Basic CPUs
feaTureS
Compact body 140 x 100mm (WxH)*
The functions for a medium-scale PLC are squeezed into a compact body which requires minimal installation area for an overall reduction in the device size.
Real number data operation is supported, too, enabling you to simplify programs for data processing.
Performance specifications
PLC type Inputs / outputs Built-in memory Program memory capacity No. of instructions Basic instructions High-level instructions Operating speed Operation memory Internal relay (R) Timer/counter (T/C) Data register (DT) File register (FL) Master control relay (MCR) Jump labels (JMP + LOOP) Number of step ladders Number of subroutines Interrupt program Time interrupt Other functions 4048 points 1024 points in total 6000 words 0 to 14,333 words, optionally up to 30,717 words 256 256 1000 stages 100 1 0.5ms to 1.5s Runtime editing, watchdog function, I/O error check, battery, syntax, memory and password functions, test mode, machine code memory, constant cycle time 96 428 0.35s per basic instruction FP2-C1, FP2-C1D, FP2-C1SL Central: max. 1600 (with 25 units) locally expanded: max. 2048 (via MEWNET-F or S-LINK) RAM (EPROM or FROM optional) 16,000 steps, expandable to 32,000 steps
09/2008
23
fP2SH series
Ultra-high performance/Specifications
feaTureS
Scanning time of 1ms for 20k steps
With an operating speed at the top of its class, super high-speed processing is made possible. The result is a dramatically decreased tact time and high-speed device. Both the large programming capacities of 60k and 120k are available depending on the model. The small PC card is available for programming backup or data memory expansion. This allows data processing of great amounts of data. These functions, options with the FP2, are built right into the FP2SH. The I/O unit and intelligent unit are the same for the FP2 series.
Large programming capacity of up to 120k steps Optional small PC card is also available
Performance specifications
PLC type Inputs / outputs Built-in memory Program memory capacity No. of instructions Basic instructions High-level instructions Operating speed Operation memory Internal relay (R) Timer/counter (T/C) Data register (DT) File register (FL) Master control relay (MCR) Jump labels (JMP + LOOP) Number of step ladder Number of subroutines Interrupt program Time interrupt Other functions 14,192 points 3072 points in total 10,240 words 32,765 words x 3 banks 256 (1st program: 256 points / 2nd program: 256 points) 256 (1st program: 256 points / 2nd program: 256 points) 1000 100 1 0.5ms to 1.5s Test run operation, forced input/output, interrupt processing, batch conversion, function for multiple instructions in RUN mode, calendar time, computer link and modem control by the TOOL and COM port, IC card, 2MB SRAM, Flash-EEPROM, ROM operation, comment input function 95 434 0.03s per basic instruction FP2-C2, FP2-C2P, FP2-C3P Central: max. 1600 (with 25 units) locally expanded: max. 8192 (via MEWNET-F or S-LINK) RAM (EPROM or FROM and IC memory card optional) FP2-C2, FP2-C2P: 60,000 steps, FP2-C3P: 120,000 steps
24
09/2008
input units
i/o number 16 32 64 Part number FP2-X16D2 FP2-X32D2 FP2-X64D2 16 inputs 32 inputs 64 inputs voltage 1224VDC 24VDC 24VDC Connection Screw terminal MIL connector MIL connector
output units
i/o number 6 relays 16 relays voltage 250VAC 250VAC Connection rating Terminal Terminal Connector Connector 5A 2A 0.5A 0.1A 0.1A
16 transistors 1224VDC Terminal 32 transistors 524VDC 64 transistors 524VDC Part number FP2-Y6R FP2-Y16R FP2-Y16T FP2-Y16P FP2-Y32T FP2-Y32P FP2-Y64T FP2-Y64P 6 relay outputs 16 relay outputs 16 transistor outputs NPN 16 transistor outputs PNP 32 transistor outputs NPN 32 transistor outputs PNP 64 transistor outputs NPN 64 transistor outputs PNP
09/2008
25
An additional input/output mixed unit with ON pulse catch function is available. This useful function makes it possible to read ON pulses with extremly small widths.
Part number FP2-XY64D2P FP2-XY64D7P FP2-XY64D2T FP2-XY64D7T 32 In / 32 Out PNP 32 In / 32 Out PNP pulse catch 32 In / 32 Out NPN 32 In / 32 Out NPN pulse catch
FP2-AD8X FP2-RTD
8 8
Twenty types of input range such as voltage and temperature sensor are selectable and available for various connection devices (FP2-AD8X). RTD device and thermocouple can be directly connected (FP2-AD8X, FP2-RTD).
26
09/2008
Part number
FP2-PP21 FP2-PP22 FP2-PP41 FP2-PP42 2 axes, transistor output 2 axes, line driver output 4 axes, transistor output 4 axes, line driver output
Part number
FP2-PN2AN FP2-PN4AN FP2-PN8AN 2-axes positioning unit RTEX 4-axes positioning unit RTEX 8-axes positioning unit RTEX
09/2008
27
Part number
FP2-DPVI-M FP2-DEV-M FP2-CAN-M Master unit for PROFIBUS Master unit for DeviceNet Master unit for CANopen
Part number
FP2-FNS AFPN-AB6200 AFPN-AB6201 AFPN-AB6218 FP2 FNS expansion unit PROFIBUS plug-in unit DeviceNet plug-in unit CANopen plug-in unit
28
09/2008
fP web-Server
Safe, easy and cost-effective M2M communication
wordwide CommuniCaTionS
The FP Web-Server unit connects all FP-series controllers to the Ethernet. No changes to the PLC programs are necessary. Simply assign an IP address to the FP Web-Server and connect the PLC to the FP Web-Server via the serial RS232C interface. A standard browser, e.g. MS Internet Explorer, can be used for access at the PC. Configuration of the unit is easily done with the FP Web Configurator Tool, which has to be ordered once separately. fP web-Server main features: web-Server: PLC data presented as HTML pages Access via standard Internet browser HTML entry field for PLC data change Optional password protection Java applet functions library email: PLC can send Emails, also with PLC data attachments Email server access via LAN or Internet dial-up PLC defined or pre-stored mail text rS232C device server: Ethernet RS-232C conversion (MEWTOCOL) Transparent RS232C data tunnelling via Ethernet Programming and visualization access via Ethernet modem / ethernet gateway: FP Web-Server can be dialed up via modem for local or network access One remote gateway for multiple FP Web-Servers in a local Ethernet network Remote password handling modbus-TCP communication: Modbus-TCP server or client for a PLC Modbus-TCP server for multiple PLCs Modbus-TCP server gateway for Modbus-RTU slave unit(s) Modbus-TCP client gateway for any Modbus-RTU master Modbus-TCP master or slave interface for a PLC other functions: XML file delivery for PLC data exchange Network time server functions Part number
FP Web-Server Licence to upgrade an FP Web-Server to an IEC60870 Communicator FP Web Configurator Tool FPWEB2 Flash memory IEC60870LIS RAM memory Compliance with standards Dimensions (WxHxD)
fP web-Server advantages: Uses existing Intranet, saves wiring Uses standard browser, saves Scada software Remote control Remote monitoring Remote programming Alarm information via Email Interface / protocol converter
ieC60870 CommuniCaTor
Based on the same hardware as the FP Web-Server safe and easy telecontrol with FP-series PLCs using the widespread IEC 60870-5 telecontrol standard is possible. Thus remote process stations can easily be linked to supervisory control systems or telecontrol main stations. The IEC60870 Communicator supports both IEC 60870-5-101 communication via RS232C or modem and IEC 60870-5-104 communication via Ethernet in one unit.
Specifications
Operating voltage Current consumption LEDs Ambient temperature Ethernet connection PLC connection Modem connection Protocols and standards 24VDC (10.8 to 26.4VDC) 75mA Power, COM Ethernet connection, COM data exchange 0 to +55C Ethernet-COM: 100 BaseTX (via RJ 45 connector) PLC COM: RS232C (via 3-pin Phoenix screw terminal) Modem COM: RS232C (via 9-pin SUB-D with RTS, CTS) TCP/IP, UDP/IP, DHCP, FTP, TELNET, HTTP, SMTP, PPP, XML, IEC60870-5-101, IEC60870-5-104, Modbus-TCP 8 MB 8 MB CE, UL, cUL 25 x 90 x 64mm
FPWEBTOOL2
09/2008
29
fP modem-eu
Telecontrol
fP modem-eu
The FP Modem-EU is a universal device offering not only dial-up communication but also dedicated/leased line and multidropdedicated line communication. Also ASCII text facsimiles can be easily created without special fax software. A short text message (SMS) can be sent using special function blocks designed for the Control FPWIN Pro PLC programming software. Special features of the fP modem-eu for industrial telecontrol: Very small size Operating voltage 24VDC Attachable to a 35mm DIN rail Password protection and call back function Leased line mode (pier-to-pier) Multidrop-leased line mode according to V.23 at 1200 bps DCD output for connection to the digital input of a PLC DTMF-send function and DTMF-receive function for a simplified telecontrolling ASCII fax mode CLIP decoder for calling line identification Using the FP Web-Server (see previous page) there are different strong features which can be accomplished in combination with the FP Modem-EU. Compliant and certified, the CTR21 modem can be used in the following countries: Belgium, Denmark, Germany, Finland, France, Greece, Ireland, Iceland, Italy, Luxembourg, Netherlands, Norway, Austria, Portugal, Sweden, Switzerland, Spain, United Kingdom. The modem is not licensed for the US. User libraries make the integration of communication functions into PLC programs easy, saving programming time and money. Mistakes can be avoided by using well proven function blocks and program examples created by experienced programmers, e.g. Panasonic CONTROL LIBRARY MODEM (NCL-CM-LIB).
Specifications
Part number Operating voltage Current consumption LEDs Ambient temperature Connection to PLC, PC or FP Web-Server Connection to the telephone network Carrier detect connection Error correction Data compression Dialing method Control / Operation Operation modes DTE speed (RS232C baud rate) Line transmission speed Compliance with standards Dimensions (WxHxD) FPMODEMEUD 24VDC (16.6 to 26.4VDC) Approx. 90mA / max. 120mA Power, DCD (Carrier detect) 0 to +55C RS232C (Sub-D 9-pin female) RJ12 jack and RJ12 - RJ12 cable, national adapter is not enclosed 3-pin Phoenix screw terminal port plug V.42, LAPM, MNP4 V.42bis and MNP5 Pulse dialing, tone dialing (DTMF) Extended AT command set, Hayes compatible Automatic selection, V.17, V.21, V.22, V.23, V.22bis, V.27, V.29, V.32, V.32bis 600, 1200, 2400, 4800, 9600, 14,400, 19,200, 38,400, 57,600, 115,200 bps 14,400 bps, 300 (V.21) to 57,600 bps (V.32bis and V.42bis compression, depending on the type of data) CTR21 for PSTN CTR15 for dedicated / leased line CE 25 x 90 x 64mm EN60950 EN50082-2 EN50081-1 Electric safety Industrial E.M. immunity domestic E.M. emission
30
09/2008
Functions can be saved in libraries for future reuse One instruction for different data types (overloaded instructions) Navigator with tree representation of called functions provides an overview even for very complex projects Long variable names make the program self-explanatory
The SFC editor (Sequential Function Chart) allows you to easily visualize processes
Special functions for controlling the SFC program from another program
Using alliases names for PLC-independent access on the special data registers, e.g. RTC Structuring with selection statements The ST editor (Structured Text) solves complex programming tasks
Using STRING functions for analyzing incoming data or for generating formatted output strings
The most important highlights at a glance: One software for all FP-series PLCs 5 programming languages (instruction list, ladder diagram, function block diagram, sequential function chart, structured text) available for all PLCs Program organization units, task and project management provide clear structure. Reuse of ready-made functions and function blocks saves time for programming and debugging. Online monitoring and diagnostics Part numbers: Forcing turning off input and output contacts via the PC FPWINPROF: Full version supports all FP-series PLCs Modem and Ethernet communication for remote programming, service and diagnostics FPWINPROS: Small version, Extensive comments online documentation created hand in hand with the program supports FP-e, FP0, 6 languages are supported: English, German, French, Italian, Spanish and Japanese. FP-X and FPS (Sigma)
09/2008
31
fP oPC Server
Standardized connection to SCADA/HMI software
ConneCTS your favoriTe induSTriaL aPPLiCaTion To THe fP-SerieS PLCS
The Panasonic OPC server allows high-performance data transfer between applications supporting the universally accepted OPC DA Standard (v1-v3) and Panasonic FP-series PLCs.
Navigator pane shows the hierarchical structure of channel, device and tag group elements.
Tag pane shows the tag elements in a list structure. Multiple rows can be selected and changes applied to all selected elements.
System log pane displays information, warnings and error event messages.
Server staus pane shows actual status information about the server application, e.g. server time, up time, connected clients and number of tags.
Part number
FP OPC Server software with one license Additional FP OPC Server license AFPS03510D AFPS03517D
32
09/2008
fP data analyzer
Read and display PLC data
The FP Data Analyzer is a software tool for acquisition, logic analysis and representation of recorded data on multiple channels connected to any Panasonic PLC. The software is a stand-alone tool. You need not install any other software to run the FP Data Analyzer.
The FP Data Analyzer can be connected to any Panasonic PLC by utilizing the integrated MEWNET Manager, for instance via any COM port. Recording and analyzing remote PLCs, sensors, actuators, etc. via LAN or modem is just a matter of seconds. In addition, not only PLCs can be analyzed with the FP Data Analyzer! Via the integrated OLE interface, the P500 image processing software can also send samples to the analyzer.
09/2008
33
Control CommX
The connection in ActiveX technology
Connects your visual Basic application to Panasonic PLCs
feaTureS
No need for knowledge of Panasonics PLC communication Protocol (MEWTOCOL). Communication programs can be made simply by dropping a Control on to a form. Ethernet or modem connection is possible. Can be started simply by inputting a command. Your own application and Panasonic software can communicate at the same time. Length of time for starting is shortened drastically by using Panasonic PLC software.
SeTuP ProCeSS
Configuration of communication
Programming
Part number
Control CommX software with USB port dongle AFW20031
feaTureS
Real time display of the PLC memory area in the Excel cell Changing the PLC memory area directly from the Excel cell Saving the PLC data on the file and displaying the data that have been saved in the file Booting Excel macros automatically By combining the macro with PCWAY, it is possible to automatically generate reports or to change the colors of the charts based on the PLC information. Email function PCWAY monitors internal relays of the PLC and sends the equipment status information to a PC or a cellular phone via e-mail when the internal relay changes from OFF to ON. Part number
PCWAY software with USB port dongle USB port dongle for PCWAY and CommX AFW10031 AFW1033
34
09/2008
Completion
Servo driveS
Panasonic servo drives enable high performance motion control to be applied to almost all types of machines, including chip mounting machines and general industrial machines.
inverTerS
Easy to operate, ultra compact inverters offer cost-effective solutions for simple speed control up to sophisticated motion control applications.
SenSorS
SUNX is the brand name for our sensor products. Whatever type of sensor is required, our wide product range offers you the right solution.
09/2008
35
global network
North America
Europe
Asia Pacific
China
Japan
Panasonic Electric Works Italia Srl Nordic Countries Panasonic Electric Works Nordic AB PEW Fire & Security Technology Europe AB Poland Panasonic Electric Works Polska sp. z o.o Portugal Panasonic Electric Works Espaa S.A. Spain Panasonic Electric Works Espaa S.A. Switzerland Panasonic Electric Works Schweiz AG United Kingdom Panasonic Electric Works UK Ltd. North & South America USA PEW Corporation of America
629 Central Avenue, New Providence, N.J. 07974, Tel. 1-908-464-3550, Fax 1-908-464-8513, www.pewa.panasonic.com
Asia Pacific / China / Japan China Hong Kong Japan Singapore Panasonic Electric Works (China) Co., Ltd.
Level 2, Tower W3, The Towers Oriental Plaza, No. 2, East Chang An Ave., Dong Cheng District, Beijing 100738, Tel. (010) 8518-5988, Fax (010) 8518-1297 RM1205-9, 12/F, Tower 2, The Gateway, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong, Tel. (0852) 2956-3118, Fax (0852) 2956-0398
Panasonic Electric Works (Hong Kong) Co., Ltd. 1048 Kadoma, Kadoma-shi, Osaka 571-8686, Japan, Tel. (06) 6908-1050, Fax (06) 6908-5781, www.mew.co.jp/e-acg/ Matsushita Electric Works, Ltd. Panasonic Electric Works Asia Pacific Pte. Ltd. 101 Thomson Road, #25-03/05, United Square, Singapore 307591, Tel. (06255) 5473, Fax (06253) 5689
09/2008
Copyright2008PrintedinGermany 4104euen08/08