Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The L&S-MRT is an innovative and cost-eective governing solution that oers high-performance and versatile control for new or existing hydro turbines.
Maintenance-free design eliminates service calls Off-the-shelf components ensure availability and cost-effective spare parts Powerful control algorithms offer fast system response Optimized regulation modes for all system conditions Easily replaces mechanical and electrical governors
High Performance and Versatile Control For Francis, Kaplan and Pelton (up to 2 needles) turbines Meets and exceeds international speed governor standards Speed, power, flow, and level control Isolated, off-line, on-line control (adaptive PID parameters) Optimized turbine efficiency with CAM or needle/deflector control Configurable position settings of Kaplan blades or Pelton deflectors
for start-up breakaway and overspeed shutdown conditions
Synchronous condense, brake, and creep control Auto-Manual, Local-Remote operation Automatic synchronization capability
Powerful and Cost-effective Design Modern PLC-based technology (Modicon, AB, or GE) Control software on Flash-card allows fast plug-&-play replacements Color touch-screen interface (HMI) to control/configure/tune the system Test and Alarm screens for easy troubleshooting Ability to force outputs for system & hardware verification Configurable I/O ports facilitate installation and functional expansion ModBus link easily integrates with plants IEDs and SCADA systems Multiple speed sensing capabilities Selectable interface language (English, French, Spanish or Portuguese)
ENGINEERING
1810 Cty. Hwy. XX Rothschild, WI 54474 800.283.8332
www.lselectric.com
Options Auto-synchronization hardware Power Transducer Redundant speed sensing Redundant power supply Up to 16 interposing relays Speed, position, level feedback transducers Mechanical Overspeed Trip Device Electrical-hydraulic interfaces, filters, distributing valves,
and other hardware required to work in both low and high pressure systems are also available from L&S Electric.
Communication interface Standard: ModBus TCP/IP port Optional: ModBus serial RS485 or RS232 Optional: Managed Ethernet Switch with 5 ports Optional: Remote Access Server for secured remote control
Environmental Storage and operating temperature: 32 F to 140 F (0 C to +60 C) Max relative humidity 95% (non-condensing) General Performance Speed dead band: 0.02% Speed input resolution: 5 10-5 Governor dead time: 0.2 s Standard Parameter Adjustment Proportional gain: 0 20 Integral action time: 0 9.999 1/s Derivative time: 0 9.999 s Permanent speed droop: 0 10%
Weight: Approximately 200 lb. (91 Kg) Power supply: Output: 24 VDC, 20A Universal Input: 100 VAC - 240 VAC (50/60Hz), or 125 VDC - 250 VDC Input/Output Modules Sixteen (16) digital inputs with 2500V of isolation through with a 24 VDC, 48 VDC, 125 VDC, 120 VAC, or 240 VAC isolator Sixteen (16) Digital outputs with 2500V of isolation with a 24 VDC coil/SPDT mechanical relay (5A@240 VAC or 30 VDC, 0.5A@125 VDC) Eight (8) Analog 0/4 20mA inputs Eight (8) Analog 0/4 20mA outputs
Modicon PLC
Allen-Bradley PLC