Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
No. 1
B.
Conveyance/distribution of Water
Items A.1 Water Treatment Chemical - Coagulant and flocculant - Adsorption agents - Fluoridation chemical - Disinfectant - Conditioning agent - Other oxidation agent A.2 Single treatment unit - membrane filter A.3 Complete small scale water treatment B.1 Pipes with material: - Polyethylene (PE) - Polyvinylchloride (PVC) - Acrylonitrile-butadiene-styrene (ABS) - Polypropylene (PP) - Polybutelene (PB) - Glass reinforced plastic (GRP) - Mild Steel Cement Lined (MS) - Stainless Steel (SS) - Ductile Iron (DI) - Copper tubes - Composite pipes B.2 Paip Fitting/ Joint/ Special Joints - Flanged joins - Welded joints - Gobout joints - Flexible mechanical coupling - Butt Fusion/electrifusion - Sleeve coupling - Push on spigot and socket - Sinle gland-machanical joint - Stepped coupling Fittings and Special - Tapers - Flange adaptors - Bends - Tees - Angle branches and Crosses - Puddle Flanges - Bellmouth - Rose strainer - Blank Flanges
No. 3.
Items C.1 Balancing and services reservoir Reinforce concrete Prestress concrete Precast concrete Glass Reinfirced Polyester Fiberglass RP Stainless steel Polyethelene Galvanized pressed steel D.1 Pump D.2 Valve - Sluice valves/gate valves - Check valves - Scour valves - Air valves/ air release valve - Stoppable valves/ lockable valves/servicing valves - Control valve/automatic control valve - Butterfly valves - Reflux valves - Ball or Float valves - Altitude valves - Pressure reducing valves - Pressure sustaining valves - Constant flow valves - Hydrants - Free Discharge Valve - In-Line Throttling Valve - Submerged Discharge Valve - Pressure Sustaining Valve - Constant Flow Valve - Backflow Preventer D.3 Meter - Bulk meters - Sub meters - Domestic meter D.4 Others (1) Air blower (2) Air compressors (3) Chemical dosing devices (4) Surge suppression devices (5) Instrumentation (6) Hydraulic controlled equipment (7) Bandscreen
2
No.
Items
4.
Taps Stop valves Ball valves Constant flow valves Flushing cisterns Bidets Drinking fountain
LIST OF TECHNICAL STANDARD FOR EQUIPMENT, DEVICE, MATERIAL, SYSTEM OR FACILITY FOR WATER SUPPLY SYSTEM CATEGORY A: TREATMENT OF WATER A.1 A.2 A.3 WATER TREATMENT CHEMICAL SINGLE TREATMENT UNIT COMPLETE SMALL SCALE WATER TREATMENT
STANDARDS MS 699:2008: Aluminium Sulphate for Use in Potable Water Supply Specification (Second Revision)
Polyaluminium chloride hydroxide / MS 1454:2007 Liquid polyaluminium chloride for use in potable water supply specification (first Polyaluminium chloride hydroxide revision), 2007 sulphate / Polyaluminium chloride hydroxide silicate sulphate Sodium Aluminate MS 1572:2003 Specification for Sodium Aluminate used for potable water supply
Iron (III) chloride Iron (III) chloride sulphate Iron (II) sulphate Iron (III) sulphate liquid Iron (III) sulphate solid
MS 1450:1999: Specification for liquid ferric chloride for potable water treatment MS 1452 1999 Specification for liquid ferric sulphate for potable water treatment
MS 1456:1999 : Guidelines for the application of liquid ferric based salts in potable water 1
PRODUCTS Application of liquid ferric based product in potable water treatment Product based on Polydiallyldimethyl ammonium chloride (PolyDADMAC) Anionic, Cationic Product based on polyacrylamides Anionic, Cationic and non-ionic Product based on Polyamines Anionic, Cationic Calcium carbonate Sodium carbonate Chlorine Sodium hypochlorite Calcium hypochlorite Sodium flouride Sodium silicofloride
STANDARDS treatment MS 1930:2007 : Poly(polydiallyldimethyl ammonium chloride) or polyDADMAC for use in potable water supply MS 1928:2007 : polyacrylamides for use in potable water supply (specification) MS 1929: 2007 : polyamines for use in potable water supply (specification) MS 1836:2005 Hydrated Lime and slurry lime for use in potable water supply MS 1551 : 2002 Specification for soda ash (sodium carbonate) used for potable water supply MS 171:2003 Specification for liquid chlorine used for potable water supply MS 1718:2003 : sodium hypochlorite for use in potable water supply MS 1548:2003 : specification for calcium hypochlorite use for potable water supply 2003 MS 1573 : 2003 Specification for sodium fluoride used for potable water supply MS 1724:2004 Sodium silicofloride for use in potable water supply specification 2004
potassium permanganate Copper sulphate Activated carbon (powder) Activated carbon (granular)
MS 1576: 2003 specification for potassium permanganate used for potable water supply MS 1576:2003: Specification for Copper Sulphate used for potable water. MS 873:2005 : powdered activated carbon for use in potable water supply specification Granular activated carbon for use in potable water supply (specification) 2
STANDARDS MS 847: 1983 - specification for silica sand for the manufacturer of sodium silicate. MS 700: 1981 (Specification) for sodium hydroxide (technical grades)
Sodium Hydroxide
Remarks
CATEGORY B PRODUCTS USED FOR THE CONVEYANCE OF WATER. B.1 Pipes B.1.1 Polyethylene (PE) Pipes MS 1058: Part 2: 2002 B.1.1.1 Polyethylene (PE) Pipes MS 1058: Part 2: 2005 Specification for Polyethylene (PE) Piping Systems for Water Supply : Part 2 : Pipes (Third Revision) Specification for Polyethylene (PE) Piping Systems for Water Supply : Part 2 : Pipes (Forth Revision)
Standards referred by industry No. Product Standard No. Standard Title Plastics Piping Systems Polyethylene (PE) Pipes and Fittings for Water Supply Part 2: Pipes Plastics Piping Systems for Hot and Cold Water Installations Polyethylene of Raised Temperature Resistance (PERT) : Part 2 : Pipes Plastics Piping Systems for Hot and Cold Water Installations Guidance for Classification and Design
Remarks
B.1.2 Polyvinyl Chloride (PVC) Pipes MS 628: Part 1: 1999 AMD.1: 2001 & AMD.2: 2002 B.1.2.1 Unplasticized Polyvinylchloride (uPVC) Pipes Specification for Unplasticised PVC (uPVC) Pipes for Water Supply : Part 1: Pipes (1st revision) Plastics Piping Systems for Industrial Applications Unplasticised Polyvinyl Chloride (PVC-U) Specifications for Components and the System (First Revision)
Standards referred by industry No. Product Standard No. Standard Title Specification for Unplasticized Polyvinyl Chloride (PVC-U) Pressure Pipes for Cold Potable Water. Specification for Unplasticized PVC Pipes for Industrial Uses Plastics Piping Systems for Water Supply and for Buried and Above-Ground Drainage and Sewerage Under Pressure. Unplasticized Poly(vinyl Chloride) (PVC U). Pipes Specification for Unplasticised PVC (uPVC) Pipes for Water Supply : Part 1: Pipes (1st revision) Standard Specification for Chlorinated Polyvinyl Chloride (cPVC) Plastic Hot and Cold Water Distribution System.
Remarks
BS 3505: 1986
BS 3506: 1969
B.1.2.2
MS 628: Part 1: 1999 AMD.1: 2001 & AMD.2: 2002 ASTM D2846 / D2846M 09b
MS 628: Part 1: 1999 AMD.1: 2001 & AMD.2: 2002 ASTM D2846 / D2846M 09b
B.1.2.3
Standards referred by industry No. Product Standard No. Standard Title Acrylonitrile-Butadiene Styrene (ABS) Piping Systems for Pressure Applications Part 1: Specification for Compounds, Pipes and Fittings (First Revision) Acrylonitrile-Butadiene Styrene (ABS) Piping Systems for Pressure Applications Part 2: Methods of Test Acrylonitrile Butadiene Styrene (ABS) Compounds, Pipes and Fittings for Pressure Application Plastics Piping Systems for Hot and Cold Water Installations Polypropylene (PP). Part 2: Pipes Polypropylene (PP) Pipes PPH, PP-B, PP-R, PP-RCT Dimensions Plastics Piping Systems for Hot and Cold Water Installations Polypropylene (PP). Part 2: Pipes
Remarks
B.1.3.1
AS/NZS 3518: 2004 B.1.4 Polypropylene (PP) Pipes ISO 15874: Part 2: 2003
B.1.4.1
B.1.4.2
Remarks
B.1.5 Polybutylene (PB) Pipes Polybutylene (PB) Pipes AS/NZS 2642-2: 1994 Polybutylene (PB) Plumbing Pipe Systems Polybutylene (PB) Pipe for Hot and Cold Water Applications. Plastics Piping System for Pressure and Non-pressure Water Supply Glass Reinforced Thermosetting Plastics (GRP) Systems Based On Unsaturated Polyester (UP) Resin AS/NZS 2642-2: 1994
B.1.5.1
B.1.6.1
B.1.7 Mild Steel Cement Lined (MS) Pipes B.1.7.1 Mild Steel Cement Lined (MS) Pipes BS 534: 1990 Steel Pipes, Joints and Specials for Water and Sewage BS 534: 1990
Standards referred by industry No. Product Standard No. ERW & SAW BS 3601: 1987 Standard Title Carbon Steel Pipes and Tubes with Specified Room Temperature Properties for Pressure Purposes Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption Technical delivery conditions. Carbon Steel Pipes and Tubes with Specified Room Temperature Properties for Pressure Purposes
Remarks
MS 1968: 2007 (BS EN 10224: 2002) B.1.7.2 Mild Steel Pipes (Bare tubes) ERW & SAW BS 3601: 1987 B.1.8 Stainless Steel (SS) Pipes B.1.8.1 Stainless Steel (SS) Pipes - Industrial MS 1841: 2010 (ASTM A 312)
Seamless, Welded and Heavily Cold Austenitic Stainless Steel Pipes - Specification Welded Stainless Steel Tubes for the Conveyance of Water and Other Aqueous Liquids Technical Delivery Conditions Light Gauge Stainless Steel Pipes for Ordinary Piping
B.1.8.2
Standards referred by industry No. Product Standard No. Standard Title Ductile Iron Pipes, Fittings, Accessories and Their Joints for Water Pipelines Requirement and Test Method Ductile Iron Pipes, Fittings, Accessories and Their Joints for Water Pipelines Requirement and Test Method
Remarks
BS EN 545: 2006 B.1.9.1 Ductile Iron (DI) Pipes MS 1919: 2006 (BS EN 545: 2002) B.1.10 Copper Tubes
B.1.10.1
Copper Tubes
BS EN 1057: 1996
Copper and Copper Alloys. Seamless, Round Copper Tubes for Water and Gas in Sanitary and Heating Applications
BS EN 1057: 1996
B.1.11 Composite Pipes Standard Specification for Polyethylene / Aluminium / Polyethylene (PE-AL-PE) Composite Pressure Pipes Steel Pipes of Lining Plastic for Water Supply
B.1.11.1
PE Aluminium Pipes
ASTM F1282 - 03
ASTM F1282 - 03 This standard is in Chinese Language. There is no english version available.
B.1.11.2
Polysteel Pipes
Standards referred by industry No. Product Standard No. B.2 Pipe Fittings B.2.1 Polyethylene (PE) Fittings BS EN 12201-3:2003 AS/NZS 4129: 2008 B.2.1. 1 Polyethylene (PE) Fittings MS 1058: Part 3: 2006 Polyethylene Pipes for Water Supply. Part 3 : Fittings Fittings for Polyethylene (PE) Pipes for Pressure Application Polyethylene (PE) Piping Systems for Water Supply Part 3 : Fittings Plastics Piping Systems Polyethylene (PE) Pipes and Fittings for Water Supply Part 3: Fittings Pipe Joint Assemblies and Fittings for High-Density Polyethylene (PE-HD) Pressure Pipes; Adaptors for Fusion Jointing, Flanges and Sealing Elements; Dimensions Standard Title
Remarks
B.2.1. 2
DIN 16963: Part 4: 1988, DIN 16963: Part 5: 1989 & DIN 16963: Part 6: 1989
10
Standards referred by industry No. Product Standard No. Standard Title Pipe Joints and Components of Polyethylene (PE) for Pipes Under Pressure, PE 80 and PE 100 Part 5: General Quality Requirements, Testing Pipe Joints Assemblies and Fittings for High-Density Polyethylene (PE-HD) Pressure Pipes; Injection-Moulded Fittings for Butt Welding: Dimensions Pipe Joints and Components of Polyethylene (PE) for Pipes Under Pressure, PE 80 and PE 100 Part 5: General Quality Requirements, Testing Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for SocketWelding, Dimensions Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for SocketWelding, Dimensions
Remarks
B.2.1. 3
DIN 16963: Part 5: 1989, DIN 16963: Part 8: 1980, DIN 16963: Part 9: 1980, DIN 16963: Part 10: 1980 & DIN 16963: Part 14: 1983
11
Standards referred by industry No. Product Standard No. Standard Title Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-Welding, Dimensions Pipe Joint Assemblies and Fittings for High-Density Polyethylene (HDPE) Pressure Pipes; Pipe Couplings; Dimensions Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends of Segmental Construction for ButtWelding, Dimensions Pipe Joint Assemblies and Fittings for Types 1 and 2 High Density Polyethylene (HDPE) Pressure Pipes; Tees and Branches Produced by Segment Inserts and Necking for Butt Welding; Dimensions
Remarks
DIN 16963: Part 1: 1980, DIN 16963: Part 2: 1983 & DIN 16963: Part 5: 1999
12
Standards referred by industry No. Product Standard No. Standard Title Pipe Joints and Components of Polyethylene (PE) for Pipes Under Pressure, PE 80 and PE 100 Part 5: General Quality Requirements, Testing Specification for Performance Requirements for Joints and Compression Fittings for Use with Polyethylene Pipes Plastics Piping Systems for Hot and Cold Water Installations Guidance for Classification and Design Specification for Unplasticised PVC (uPVC) Pipes for Water Supply : Part 2: Joints and Fittings for Use with uPVC Pipes: Section 2.1: uPVC Joints and Fittings
Remarks
B.2.1. 5
Nylon Joints and Compression Fittings for Use with HDPE Pipes
B.2.2 Unplasticized Polyvinyl Chloride (PVC) Fittings Unplasticized Polyvinylchloride (uPVC) Fittings
B.2.2. 1
13
Standards referred by industry No. Product Standard No. Standard Title Plastics Piping Systems for Water Supply and for Buried and Above-Ground Drainage and Sewerage Under Pressure. Unplasticized Poly(vinyl Chloride) (PVC U). Fittings. Joints and Fittings for use with Unplasticized PVC Pressure Pipes. Injection Moulded Unplasticized PVC Fittings for Solvent Welding for use with Pressure Pipes, Including Potable Water Supply. Joints and Fittings for use with Unplastisized PVC Pressure Pipes. Mechanical Joints and Fittings, Principally of Unplasticized PVC.
Remarks
BS 4346-1: 1969
BS 4346-2: 1970
B.2.2. 2
Standard Specification for Chlorinated Polyvinyl Chloride (cPVC) Plastic Hot and Cold Water Distribution System.
14
Standards referred by industry No. Product Standard No. B.2.3 Acrylonitrile-Butadiene-Styrene (ABS) Fittings MS 1419: Part 2: 1997 Acrylonitrile-Butadiene Styrene (ABS) Piping Systems for Pressure Applications Part 2: Methods of Test Acrylonitrile-Butadiene Styrene (ABS) Piping Systems for Pressure Applications Part 1: Specification for Compounds, Pipes and Fittings (First Revision) Acrylonitrile Butadiene Styrene (ABS) Compounds, Pipes and Fittings for Pressure Application Standard Title
Remarks
B.2.3. 1
AS/NZS 3518: 2004 B.2.4 Polypropylene (PP) Fittings B.2.4. 1 Polypropylene (PP-R, PP-B & PP-H) Fittings ISO 15874: Part 3: 2003
Plastics Piping Systems for Hot and Cold Water Installations Polypropylene (PP) Part 3 : Fittings
15
Standards referred by industry No. Product Standard No. Standard Title Pipe Joints and Elements for Polypropylene (PP) for Pipes Under Pressure, PP-H 100, PPB 80 and PP-R 80 Part 5: General Quality Requirements, Testing. Specification for Performance Requirements for Joints and Compression Fittings for Use with Polyethylene Pipes Assembled Joints Between Fittings and Polyethylene (PE) Pressure Pipes Test of Leakproofness Under Internal Pressure. Polyethylene (PE) Pressure Pipes Joints Assembled with Mechanical Fittings Internal Under-Pressure Test Method and Requirement. Assembled Joints Between Fittings and Polyethylene (PE) Pressure Pipes Test of Leakproofness Under Internal Pressure when Subjected to Bending.
Remarks
ISO 3458: 1976 B.2.4. 2 Polypropylene (PP) Compression Fittings for HDPE Pipes ISO 3459: 1976
16
Standards referred by industry No. Product Standard No. Standard Title Assembled Joints Between Fittings and Polyethylene (PE) Pressure Pipes Test of Resistance to Pull Out. Plastics Pipes and Fittings Mechanical-Joint Compression Fittings for Use with Polyethylene Pressure Pipes in Water Supply Systems. Plastics Piping System for Pressure and Non-pressure Water Supply Glass Reinforced Thermosetting Plastics (GRP) Systems Based On Unsaturated Polyester (UP) Resin
Remarks
B.2.5. 1
B.2.6 Mild Steel (MS) Cement Lined Fittings BS 534: 1990 B.2.6. 1 Mild Steel (MS) Cement Lined Specials (ERW & SAW) Steel Pipes, Joints and Specials for Water and Sewage Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption Technical delivery conditions. BS 534: 1990
MS 1968: 2007
17
Standards referred by industry No. Product Standard No. B.2.7 Stainless Steel (SS) Fittings B.2.7. 1 B.2.7. 2 B.2.7. 3 Stainless Steel (SS) Threaded Fittings Stainless Steel (SS) Welded Fittings Stainless Steel (SS) Press Fittings ISO 4144: 2003 Pipework Stainless Steel Fittings Threaded in Accordance with ISO 7-1. Wrought Austenitic Stainless Steel Piping Fittings Specification (First Revision). Stainless Steel Press Fittings Standard Title
Remarks
MS 1842: 2010 (ASTM A 403) This standard is in Japanese Language. There is no english version available.
B.2.8 Ductile Iron (DI) Fittings B.2.15 Ductile Iron (DI) Fittings MS 1919: 2006 (BS EN 545: 2002) Ductile Iron Pipes, Fittings, Accessories and Their Joints for Water Pipelines Requirement and Test Method Copper and Copper Alloys. Plumbing Fittings. Fittings with Short Ends for Capillary Brazing to Copper Tubes. Copper and Copper Alloys. Plumbing Fittings. Fittings with Compression Ends for Use with Copper Tubes. MS 1919: 2006 (BS EN 545: 2002)
B.2.9 Copper Fittings B.2.9. 1 Copper Fittings (Short Ends & Capillary) BS EN 1254-1: 1998 BS EN 1254-1: 1998
B.2.9. 2
BS EN 1254-2: 1998
BS EN 1254-2: 1998
18
Standards referred by industry No. Product Standard No. Standard Title Copper and Copper Alloys. Plumbing Fittings. Fittings Combining Other End Connections with Capillary or Compression Ends. Malleable Iron Threaded Fittings of Lining Plastic for Water Supply. Polyethylene / Aluminium and Cross-linked Polyethylene / Aluminium Macro-Composite Pipe Systems for Pressure Applications.
Remarks
B.2.9. 3
BS EN 1254-4: 1998
BS EN 1254-4: 1998
B.2.10 Composite Fittings B.2.10.1 Polysteel Fittings CJ/T 137: 2001 CJ/T 137: 2001 This standard is in Chinese Language. There is no english version available. This is only the nearest standard available. Standard specific for this product is not available.
B.2.10.2
AS 4176: 1994
AS 4176: 1994
B.2.11 Adapter Spesifikasi JKR 20200-0045-99 JKR Standard Specification for Detachable Joints and Variable Adaptors for uPVC, Ductile Iron and AC Pipes. JKR Standard Specification For Flexible Couplings and Flange Adaptors. Spesifikasi JKR 20200-0045-99
B.2.11.1
Variable Adapter
B.2.11.2
Flange Adapter
19
Standards referred by industry No. Product Standard No. B.2.11.3 Flexible Coupling Spesifikasi JKR 20200-0048-99 Standard Title JKR Standard Specification For Flexible Couplings and Flange Adaptors. JKR Standard Specification for Detachable Joints and Variable Adaptors for uPVC, Ductile Iron and AC Pipes.
Remarks
B.2.11.4
Detachable Joint
B.2.12 Saddle B.2.12.1 Ferrous Saddle 2 in 1 Adjustable Saddle Spesifikasi JKR 20200-0044-99 Spesifikasi JKR 20200-0044-99 CL. 17.10 JKR No. 1 95 (BA) JKR Standard Specification for Ferrous Saddles. JKR Standard Specification for Ferrous Saddles. JKR Standard Specification for Polypropylene (PP) Clamp Saddle to be Used with Polyethylene (PE) Pipes. Spesifikasi JKR 20200-0044-99 Spesifikasi JKR 20200-0044-99 CL. 17.10 JKR No. 1 95 (BA)
B.2.12.2
B.2.12.3
PP Clamp Saddle
B.2.13 Pillar Hydrant B.2.13.1 Pillar Hydrant Spesifikasi JKR 20200-0042-99 JKR Standard Specification for Ductile Iron Pillar Hydrants. Spesifikasi JKR 20200-0042-99
20
Remarks This MS Adopted the JKR No. 1 93 (BA) JKR Specification for Pillar Hydrants.
MS 1395: 1996
MS 1395: 1996
B.2.14 Strainer B.2.14.1 Ductile Iron (DI) Strainer Spesifikasi JKR 20200-0100-01 JKR Standard Specification for Ductile Iron Strainer (DN 50 to DN 600) Spesifikasi JKR 20200-0100-01
B.2.15 Ferrules B.2.15.1 B.2.15.2 Swivel Ferrules Under Pressure Vertical Ferrules Spesifikasi JKR 20200-0174-04 MS 1396: 2006 JKR Standard Specification for Ferrules Ferrules Specification (First Revision) Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends of Segmental Construction for ButtWelding, Dimensions DIN 16963: Part 1: 1980, DIN 16963: Part 2: 1983 & DIN 16963: Part 5: 1999
B.2.1.4
PE Fabricated Fittings
21
Standards referred by industry No. Product Standard No. Standard Title Pipe Joint Assemblies and Fittings for Types 1 and 2 High Density Polyethylene (HDPE) Pressure Pipes; Tees and Branches Produced by Segment Inserts and Necking for Butt Welding; Dimensions Pipe Joints and Components of Polyethylene (PE) for Pipes Under Pressure, PE 80 and PE 100 Part 5: General Quality Requirements, Testing Specification for Performance Requirements for Joints and Compression Fittings for Use with Polyethylene Pipes Plastics Piping Systems for Hot and Cold Water Installations Guidance for Classification and Design MS ISO 10508: 2009
Remarks
B.2.1.5
Nylon Joints and Compression Fittings for Use with HDPE Pipes
22
Standards referred by industry No. Product Standard No. B.2.2 Unplasticized Polyvinyl Chloride (PVC) Fittings Specification for Unplasticised PVC (uPVC) Pipes for Water Supply : Part 2: Joints and Fittings for Use with uPVC Pipes: Section 2.1: uPVC Joints and Fittings Plastics Piping Systems for Water Supply and for Buried and Above-Ground Drainage and Sewerage Under Pressure. Unplasticized Poly(vinyl Chloride) (PVC U). Fittings. Joints and Fittings for use with Unplasticized PVC Pressure Pipes. Injection Moulded Unplasticized PVC Fittings for Solvent Welding for use with Pressure Pipes, Including Potable Water Supply. Joints and Fittings for use with Unplastisized PVC Pressure Pipes. Mechanical Joints and Fittings, Principally of Unplasticized PVC. Standard Title
Remarks
BS EN ISO: 1452-3: 2009 B.2.2. 1 Unplasticized Polyvinylchloride (uPVC) Fittings BS 4346-1: 1969
BS 4346-2: 1970
23
Standards referred by industry No. Product Standard No. B.2.2. 2 Chlorinated Polyvinylchloride (cPVC) Fittings ASTM D2846 / D2846M 09b Standard Title Standard Specification for Chlorinated Polyvinyl Chloride (cPVC) Plastic Hot and Cold Water Distribution System.
Remarks
B.2.3 Acrylonitrile-Butadiene-Styrene (ABS) Fittings MS 1419: Part 2: 1997 Acrylonitrile-Butadiene Styrene (ABS) Piping Systems for Pressure Applications Part 2: Methods of Test Acrylonitrile-Butadiene Styrene (ABS) Piping Systems for Pressure Applications Part 1: Specification for Compounds, Pipes and Fittings (First Revision) Acrylonitrile Butadiene Styrene (ABS) Compounds, Pipes and Fittings for Pressure Application MS 1419: Part 2: 1997 & MS 1419: Part 1: 2007
B.2.3. 1
AS/NZS 3518: 2004 B.2.4 Polypropylene (PP) Fittings B.2.4. 1 Polypropylene (PP-R, PP-B & PP-H) Fittings ISO 15874: Part 3: 2003
Plastics Piping Systems for Hot and Cold Water Installations Polypropylene (PP) Part 3 : Fittings
24
Standards referred by industry No. Product Standard No. Standard Title Pipe Joints and Elements for Polypropylene (PP) for Pipes Under Pressure, PP-H 100, PPB 80 and PP-R 80 Part 5: General Quality Requirements, Testing. Specification for Performance Requirements for Joints and Compression Fittings for Use with Polyethylene Pipes Assembled Joints Between Fittings and Polyethylene (PE) Pressure Pipes Test of Leakproofness Under Internal Pressure. Polyethylene (PE) Pressure Pipes Joints Assembled with Mechanical Fittings Internal Under-Pressure Test Method and Requirement. Assembled Joints Between Fittings and Polyethylene (PE) Pressure Pipes Test of Leakproofness Under Internal Pressure when Subjected to Bending.
Remarks
ISO 3458: 1976 B.2.4. 2 Polypropylene (PP) Compression Fittings for HDPE Pipes ISO 3459: 1976
25
Standards referred by industry No. Product Standard No. Standard Title Assembled Joints Between Fittings and Polyethylene (PE) Pressure Pipes Test of Resistance to Pull Out. Plastics Pipes and Fittings Mechanical-Joint Compression Fittings for Use with Polyethylene Pressure Pipes in Water Supply Systems. Plastics Piping System for Pressure and Non-pressure Water Supply Glass Reinforced Thermosetting Plastics (GRP) Systems Based On Unsaturated Polyester (UP) Resin
Remarks
B.2.5. 1
B.2.6 Mild Steel (MS) Cement Lined Fittings BS 534: 1990 B.2.6. 1 Mild Steel (MS) Cement Lined Specials (ERW & SAW) Steel Pipes, Joints and Specials for Water and Sewage Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption Technical delivery conditions. BS 534: 1990
MS 1968: 2007
26
Standards referred by industry No. Product Standard No. B.2.7 Stainless Steel (SS) Fittings B.2.7. 1 B.2.7. 2 B.2.7. 3 Stainless Steel (SS) Threaded Fittings Stainless Steel (SS) Welded Fittings Stainless Steel (SS) Press Fittings ISO 4144: 2003 Pipework Stainless Steel Fittings Threaded in Accordance with ISO 7-1. Wrought Austenitic Stainless Steel Piping Fittings Specification (First Revision). Stainless Steel Press Fittings Standard Title
Remarks
MS 1842: 2010 (ASTM A 403) This standard is in Japanese Language. There is no english version available.
B.2.8 Ductile Iron (DI) Fittings B.2.15 Ductile Iron (DI) Fittings MS 1919: 2006 (BS EN 545: 2002) Ductile Iron Pipes, Fittings, Accessories and Their Joints for Water Pipelines Requirement and Test Method Copper and Copper Alloys. Plumbing Fittings. Fittings with Short Ends for Capillary Brazing to Copper Tubes. Copper and Copper Alloys. Plumbing Fittings. Fittings with Compression Ends for Use with Copper Tubes. MS 1919: 2006 (BS EN 545: 2002)
B.2.9 Copper Fittings B.2.9.1 Copper Fittings (Short Ends & Capillary) BS EN 1254-1: 1998 BS EN 1254-1: 1998
B.2.9.2
BS EN 1254-2: 1998
BS EN 1254-2: 1998
27
Standards referred by industry No. Product Standard No. Standard Title Copper and Copper Alloys. Plumbing Fittings. Fittings Combining Other End Connections with Capillary or Compression Ends. Malleable Iron Threaded Fittings of Lining Plastic for Water Supply. Polyethylene / Aluminium and Cross-linked Polyethylene / Aluminium Macro-Composite Pipe Systems for Pressure Applications.
Remarks
B.2.9.3
BS EN 1254-4: 1998
BS EN 1254-4: 1998
B.2.10 Composite Fittings B.2.10.1 Polysteel Fittings CJ/T 137: 2001 CJ/T 137: 2001 This standard is in Chinese Language. There is no english version available. This is only the nearest standard available. Standard specific for this product is not available.
B.2.10.2
AS 4176: 1994
AS 4176: 1994
B.2.11 Adapter Spesifikasi JKR 20200-0045-99 JKR Standard Specification for Detachable Joints and Variable Adaptors for uPVC, Ductile Iron and AC Pipes. JKR Standard Specification For Flexible Couplings and Flange Adaptors. Spesifikasi JKR 20200-0045-99
B.2.11.1
Variable Adapter
B.2.11.2
Flange Adapter
28
Standards referred by industry No. Product Standard No. B.2.11.3 Flexible Coupling Spesifikasi JKR 20200-0048-99 Standard Title JKR Standard Specification For Flexible Couplings and Flange Adaptors. JKR Standard Specification for Detachable Joints and Variable Adaptors for uPVC, Ductile Iron and AC Pipes.
Remarks
B.2.11.4
Detachable Joint
B.2.12 Saddle B.2.12.1 Ferrous Saddle 2 in 1 Adjustable Saddle Spesifikasi JKR 20200-0044-99 Spesifikasi JKR 20200-0044-99 CL. 17.10 JKR No. 1 95 (BA) JKR Standard Specification for Ferrous Saddles. JKR Standard Specification for Ferrous Saddles. JKR Standard Specification for Polypropylene (PP) Clamp Saddle to be Used with Polyethylene (PE) Pipes. Spesifikasi JKR 20200-0044-99 Spesifikasi JKR 20200-0044-99 CL. 17.10 JKR No. 1 95 (BA)
B.2.12.2
B.2.12.3
PP Clamp Saddle
B.2.13 Pillar Hydrant B.2.13.1 Pillar Hydrant Spesifikasi JKR 20200-0042-99 JKR Standard Specification for Ductile Iron Pillar Hydrants. Spesifikasi JKR 20200-0042-99
29
Remarks This MS Adopted the JKR No. 1 93 (BA) JKR Specification for Pillar Hydrants.
MS 1395: 1996
MS 1395: 1996
B.2.14 Strainer B.2.14.1 Ductile Iron (DI) Strainer Spesifikasi JKR 20200-0100-01 JKR Standard Specification for Ductile Iron Strainer (DN 50 to DN 600) Spesifikasi JKR 20200-0100-01
B.2.15 Ferrules B.2.15.1 B.2.15.2 Swivel Ferrules Under Pressure Vertical Ferrules Spesifikasi JKR 20200-0174-04 MS 1396: 2006 JKR Standard Specification for Ferrules Ferrules Specification (First Revision)
30
Standards referred by industry No. Product Standard No. CATEGORY C PRODUCT FOR STORAGE OF WATER C.1 TANKS C.1.1 Reinforced Concrete Reservoir / Tank C.1.1.1 Precast Concrete Tank C.1.2 Steel Tank C.1.2.1 Glass Coated / Glass Lined / Glass Fused / Epoxy Coated / Epoxy Lining Corrugated Steel Panel With Polyethylene-Lined Water Storage Tank AWWA D103-97 ANSI/AWWA D10309 BS 1449:Pt 1: 1991 Factory-Coated Bolted Steel Tanks For Water Storage Steel Plate, Sheet & Strip. Carbon and carbonmanganese, sheet and strip. Specification for Glass Reinforced Polyester Sectional Water Tank Structural Use of Steelwork in Building Part 1 : Code of Practice for Design Rolled and Welded Section. Standard Title
Remarks
No copy of the standard BS 1449-1.1:1991, BS 1449-1.8:1991 & BS 1449-1.14:1991 Cl 10.2.1 Leakage Test Cl 10.2.2 Deflection Test
C.1.2.2
C.1.2.3
BS 5950-1:2000
31
Standards referred by industry No. Product Standard No. C.1.3 GRP / FRP Tanks SS 245 : 1995 C.1.3.1 GRP / FRP Sectional Water Tank BS EN 13280: 2001 Specification for Glass Reinforced Polyester Sectional Water Tank Specification for glass fibre reinforced cistern of one-piece and sectional construction for storage above ground of cold water Glass Reinforced Polyester Panels And Panels Water Tanks Glass Fibre Reinforced Plastic Cisterns for Cold Water Storage. Specification for one piece cisterns of nominal capacity for 500L to 25000L. Specification for glass fibre reinforced cistern of one-piece and sectional construction for storage above ground of cold water Glass Fibre Reinforced Plastic Water Tanks (Amendment 1) Standard Title
Remarks
MS 1390 : 2010
BS 7491: Pt 2 : 1992
C.1.3.2
BS EN 13280: 2001
32
Standards referred by industry No. Product Standard No. C.1.3.3 Fibreglass Water Tank MS 1241:1991 Standard Title Specification for Fibreglass Water Tanks Effective Capacity of Less Than 2000L
Remarks
C.1.4 Stainless Steel Water Tank Stainless Steel Storage Tank JKR 20200-0041-99 CNS 9443 : 1989 C.1.5 Polyethylene (PE) Water Tank MS 1225: Pt 1: 2007 C.1.5.1 PE/HDPE Storage Tank MS 1225: Pt 2: 2006 C.1.6 Pressed Steel Water Tank C.1.6.1 C.1.6.2 Pressed Steel Sectional Rectangular Tank Panel Composite Stainless Steel Tanks BS 1564:1975 BS 1564:1975 Specification for Pressed Steel Sectional Rectangular Tanks Specification for Pressed Steel Sectional Rectangular Tanks Polyethylene (PE) Tanks For Cold Water Storage; Part 1: Capacity up to 600G (Second Revision) Polyethylene (PE) Tanks For Cold Water Storage; Part 2: Capacity more than 600G (First Revision) Stainless Steel Water Tanks (With Effective Capacity Up to 15,000L) Stainless Steel Storage Tanks For Rectangular / Panel Tank
C.1.4.1
33
CATEGORY D: OTHER MECHANICAL EQUIPMENT AND INSTALLATION D.1 PUMP (BELUM ADA) D.2 VALVE D.3 METER
Remarks
CATEGORY D OTHER WATERWORKS MECHANICAL EQUIPMENT AND INSTALLATION D.2 VALVES BS EN 593 : 2004 D.2.1 Butterfly Valve JKR 20200-0050-99* BS 5163 : 1986 Industrial Valves. Metallic Butterfly Valve Butterfly Valves Specification for Predominantly Key-Operated Cast Iron Gate Valve For Waterworks Purposes Specification for Cast Iron Gate Valve Industrial Valves. Cast Iron Gate Valves Ductile Iron Type B Large Sluice Valves (DN700 to DN 1800) Ductile Iron Air Valves (Revised Edition 1999) Ductile Iron Air Valves (Revised Edition 2001)
D.2.2
BS 5150 : 1990 BS EN 1171 : 2002 JKR 20200-0077-00 JKR 20200-0043-99 JKR 20200-0097-01
D.2.3
34
Standards referred by industry No. Product Standard No. ANSI / AWWA C5122004 BS EN 12334 : 2001 BS 5153 : 1974 Standard Title Air Release, Air Vacuum, And Combination Air Valve for Waterworks Service. Industrial Valves. Cast Iron Check Valve Specification for Cast Iron Check Valves for General Purposes. Industrial Valves. Cast Iron Check Valve
Remarks
D.2.4
Check Valve
TS EN 12334:2001
D.2.5
Scour Valve
Specification for Low Resistance Single Taps and Combination Tap Assemblies (Nominal Size and ) Suitable for Operation at PN 10 max. and a min. flow pressure of 0.01MPa (0.1 bar) Building Valves. Copper Alloy Stopvalves for Potable Water Supply in Buildings. Test & Requirement.
D.2.6
Stopvalve
BS 5412 : 1996
D.2.7
BS EN 1213 : 2000
35
Standards referred by industry No. Product Standard No. BS 6675 : 1986 D.2.8 D.2.9 D.2.9.1 D.2.9.2 D.2.9.3 Float Operated Valve Control Valve / Automatic Control Valve Pressure Reducing Valve Altitude Valve Free Discharge Valve JKR 20200-0059-99* JKR 20200-0114-01* Standard Title Specification for Servicing Valve (Copper Alloy) for Water Services Piston Type Float Operated Valves (Revised Edition 1999) Ductile Iron Automatic Control Valves for Waterworks Purposes (DN15-DN1000)
Remarks
No registration yet
D.2.9.4 In-Line Throttling Valve D.2.9.5 D.2.9.6 D.2.9.7 D.2.9.8 Submerged Discharge Valve Pressure Sustaining Valve Constant Flow Valve Reflux Valve
36
Standards referred by industry No. D.2.9.9 Product Standard No. Backflow Preventer Standard Title
Note : For Item D.2.9 up to D.2.9.8 The product had been registered with us but without a standard. Lately we had been informed by IKRAM about there is a standard for control valve which is JKR Spec.
37
Remarks
CATEGORY D OTHER WATERWORKS MECHANICAL EQUIPMENT AND INSTALLATION D.3 WATER METER D.3.1 D.3.1.1 D.3.1.2 D.3.2 D.3.2.1 D.3.2.2 D.3.3 D.3.3.1 D.3.3.2 D.3.4 Flowmeter Electromagnetic Flowmeter Ultrasonic Flowmeter Volumetric Piston Water Meter Plastic Volumetric Water Meter Brass Volumetric Water Meter Jet Water Meter Multi- Jet Water Meter Single Jet Water Meter Woltman Water Meter ISO 4064-1: 2005
Measurement of Water Flow in fully charged closed conduits Meters for cold potable water and hot water Part 1 Specification
38
CATEGORY E: WATER SUPPLY PLUMBING SYSTEM E.1 E.2 E.3 E.4 E.5 TAP VALVES FLUSHING CISTERNS BIDETS DRINKING FOUNTAIN
Standards referred by industry No. Product Standard No. CATEGORY E SANITARY FITTINGS Specification for Low Resistance Single Taps and Combination Tap Assemblies (Nominal Size and ) Suitable for Operation at PN 10 max. and a min. flow pressure of 0.01MPa (0.1 bar) Sanitary Tapware. Single Taps and combination Taps For Water Supply Systems of Type 1 and Type 2. General Technical Specification. Water Supply Tap ware Specification for WC Flushing Cisterns & Flush Pipes Specification for WC Flushing Standard Title
Remarks
BS 5412:1996 Pillar Tap / Bib Tap / Mixer / Faucet / Shower BS EN 200 : 2008
E.1.1
AS / NZS 3718 : 2005 E.2.1 E.2.2 WC Flushing Cistern & Flush Pipe Plastic WC Flushing MS 795 : 2002 MS 795 : 2002
39
Standards referred by industry No. Product Standard No. Cistern E.3 Vitreous China Water Closet Pans MS 1522 : 2007 Standard Title Cisterns & Flush Pipes Vitreous China Water Closet Pans Specification (Second Revision) Vitreous China Water Closet Pans Specification (Second Revision) Specification for WC Flushing Cisterns & Flush Pipes Specification For Quality of Vitreous China Sanitary Appliances (First Revision) Specification For Quality of Vitreous China Sanitary Appliances (First Revision) Specification For Quality of Vitreous China Sanitary Appliances (First Revision) Specification For Quality of Vitreous China Sanitary Appliances (First Revision) Specification For Quality of Vitreous China Sanitary Appliances (First Revision)
Remarks
MS 1522 : 2007 E.4 Vitreous China Moulded One-Piece Water Closet MS 795 : 2002 MS 147 : 2001 Vitreous China Sanitary Appliances Urinal
E.5
MS 147 : 2001
E.5.1
MS 147 : 2001
E.5.2
MS 147 : 2001
E.5.3
Wash Basin
MS 147 : 2001
40