Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Marlborough School
Scheme of Work
Foundation Chemistry
Syllabus Content
5.1.1 Atoms, Molecules and Stoichiometry
Content
Assessment outcome
(The term relative formula mass or Mr will be used for ionic compounds.)
(a) define the terms relative atomic, isotopic, molecular and formula masses,
based on the 12C scale.
Content
• The nucleus of the atom: protons and neutrons, atomic (proton) and mass
(nucleon) numbers.
• Ionisation energies.
• Electrons: electronic energy levels, atomic orbitals, electronic
configuration.
Assessment outcomes
(f) explain the terms first ionisation energy and successive ionisation energy
of an element in terms of 1 mole of gaseous atoms or ions (see also 5.1.4(e),
(f)).
(g) explain that ionisation energies are influenced by nuclear charge, electron
shielding and the distance of the outermost electron from the nucleus.
(h) predict the number of electrons in each principal quantum shell of an
element from its successive ionisation energies.
(j) describe the numbers and relative energies of s-, p- and d- orbitals for the
principal quantum numbers 1, 2, 3 and also the 4s- and 4p- orbitals.
Content
• Ionic bonding.
• Covalent bonding and dative covalent (co-ordinate) bonding.
• The shapes of simple molecules.
• Electronegativity and bond polarity.
• Intermolecular forces.
• Metallic bonding.
• Bonding and physical properties.
Assessment outcomes
(b) describe, including the use of ‘dot-and-cross’ diagrams, ionic bonding, for
example, as in sodium chloride and magnesium oxide.
(g) predict the shapes of, and bond angles in, molecules and ions analogous
to those specified in (f).
(h) appreciate that, between the extremes of ionic and covalent bonding,
there is a gradual transition from one extreme to the other.
(l) describe hydrogen bonding between molecules containing –OH and –NH
groups, typified by water and ammonia.
(m) describe and explain the anomalous properties of water resulting from
hydrogen bonding, for example:
(i) the density of ice compared with water;
(ii) its relatively high freezing point and boiling point.
(n) describe, in simple terms, the giant molecular structures of diamond and
graphite.
Content
Assessment outcomes
(c) explain variations in (b) in terms of the structure and bonding of the
elements.
(f) describe and explain the variation of the first ionisation energies of
elements shown by
(i) a decrease down a group in terms of increasing atomic radius and
electron shielding;
(ii) a general increase across a period, in terms of increasing nuclear
charge;
(iii) the periodic decrease between Groups 2 and 3, in terms of the
higher energy level of the p sub-shell compared with that of the s sub-
shell;
(iv) the periodic decrease between Groups 5 and 6, in terms of an
increase in energy from mutual repulsion of paired electrons in a Group
6 p-orbital.
Content
Assessment outcomes
(a) describe and explain the trends in electronic configurations, atomic radii
and ionisation energies of the Group 2 elements, Mg to Ba.
(b) use the rules for assigning oxidation state (number) with elements,
compounds and ions.
(d) describe the redox reactions of the elements (Mg to Ba) with oxygen and
with water and explain the trend in reactivity in terms of ionisation energies.
(e) describe the reactions of Mg, MgO and MgCO3 with hydrochloric acid (see
also 5.3.3(f), (g)).
(g) describe lime water as an aqueous solution of Ca(OH)2 and state its
approximate pH.
(i) interpret and make predictions from the chemical and physical properties
of the Group 2 elements and their compounds.
(j) show awareness of the importance and use of Group 2 elements and their
compounds, with appropriate chemical explanations, for example: the use of
Ca(OH)2 in agriculture to neutralise acid soils; the use of Mg(OH)2 in some
indigestion tablets as an antacid.
Content
Assessment outcomes
(a) explain the trend in the volatilities of chlorine, bromine and iodine in
terms of van der Waals’forces.
(b) describe the relative reactivity of the elements Cl2, Br2 and I2 in
displacement reactions.
(c) explain the trend in (b) in terms of oxidising power, i.e. the relative ease
with which an electron can be captured.
(d) describe the characteristic reactions of the ions Cl–, Br– and I– with
aqueous silver ions followed by aqueous ammonia (knowledge of complex
formulae not required).
2 The mole (d) interpret mass spectra in terms of isotopic abundances. Use examples of mass Putting the mole in
(e) calculate the relative atomic mass of an element given the
spectra, calculate the context and using big
relative abundances of its isotopes, or its mass spectrum.
(f) define the mole in terms of the Avogadro constant; molar mass as RAM from these. numbers exercise
the mass of 1 mole of a substance. ‘courtesy Tim Joliff’ – RSC
(g) define the terms empirical formula and molecular formula. Balance simple chemical fellow’
(h) calculate empirical and molecular formulae, using composition by
reactions and use the
mass.
(i) construct balanced chemical equations (full and ionic). ‘rules’ to calculate how Write up of magnesium
(j) perform calculations (including use of the Mole Concept, formulae this can be done. experiment.
and equations) involving
(i) reacting masses;
(ii) volumes of gases;
Use ideas about the mole
(iii) volumes and concentrations of solutions in simple acid- to explain how masses of
base titrations. reacting chemicals can be
(k) deduce stoichiometric relationships from calculations such as calculated.
those in (j).
Experimentally calculate
the empirical formula of
Magnesium oxide – use
this to introduce errors.
3 Looking at (f) explain the terms first ionisation energy and successive ionisation Use ionisation energies to To prepare for a
energy of an element in terms of 1 mole of gaseous atoms or ions
Patterns try explain the model of presentation on the
(see also 5.1.4(e), (f)).
electron shells. history of the structure of
(g) explain that ionisation energies are influenced by nuclear charge, the atom – to be at least 5
electron shielding and the distance of the outermost electron from Show students that this minutes long and to
the nucleus.
model can be developed include handouts for
(h) predict the number of electrons in each principal quantum shell further to show that fellow students
of an element from its successive ionisation energies. electrons can be found in
orbitals within the
(i) describe the shapes of s- and p- orbitals.
quantum shells.
(j) describe the numbers and relative energies of s-, p- and d-
orbitals for the principal quantum numbers 1, 2, 3 and also the 4s- Students should relate
and 4p- orbitals. the orbitals to the relative
(k) deduce the electronic configurations of
energies.
(i) atoms, given the atomic number, up to Z=36;
(ii) ions, given the atomic number and ionic charge, limited Students should predict
to s and p blocks up to Z = 36. the arrangement of
electrons in a particular
element (max 36)
(b) describe, for the elements of Period 3, the variation in electronic Use data to show
configurations, atomic radii, electrical conductivities, melting points
variations as detailed in
and boiling points. syllabus.
(c) explain variations in (b) in terms of the structure and bonding of
the elements.
(e) interpret successive ionisation energies of an element in terms of
its position in the Periodic Table (see also 5.1.2(f)–(h)).
(f) describe and explain the variation of the first ionisation energies
of elements shown by
(i) a decrease down a group in terms of increasing atomic
radius and electron shielding;
(ii) a general increase across a period, in terms of
increasing nuclear charge;
(iii) the periodic decrease between Groups 2 and 3, in terms
of the higher energy level of the p sub-shell compared with
that of the s sub-shell;
(iv) the periodic decrease between Groups 5 and 6, in terms
of an increase in energy from mutual repulsion of paired
electrons in a Group 6 p-orbital.
(e) describe the reactions of Mg, MgO and MgCO3 with hydrochloric Students carry out
acid (see also 5.3.3(f), (g)).
reactions of Mg etc. with
HCl.
5 Reactions (f) describe the thermal decomposition of CaCO3 (limestone) to form Students carry out the To write up practical to
CaO (lime) and the subsequent formation of Ca(OH)2 (slaked lime)
of Calcium formation of limewater include details of
with water.
and then describe the procedure, diagrams,
(g) describe lime water as an aqueous solution of Ca(OH)2 and state reactions that are formed observations and fully
its approximate pH. balanced chemical
equations. Use
(h) describe the reaction of lime water
(i) with carbon dioxide forming CaCO3(s); knowledge of redox to
(ii) with excess carbon dioxide, forming Ca(HCO3)2(aq), as in hard identify redox reactions
water.
detailing oxidation states.
6 Titration (i) interpret and make predictions from the chemical and physical Students carry out a Revise for progress test
properties of the Group 2 elements and their compounds.
and uses of titration to calculate the
Group II (j) show awareness of the importance and use of Group 2 elements active ingredient in some Write up of titration to
elements and their compounds, with appropriate chemical explanations, for antacid powder. include, diagrams,
example: the use of Ca(OH)2 in agriculture to neutralise acid soils; procedure, mole
the use of Mg(OH)2 in some indigestion tablets as an antacid.
calculations and
percentage error
calculations.
7 Presentatio Students to complete
ns and progress test and then
progress undertake presentations
test to class.
8 Group VII (a) explain the trend in the volatilities of chlorine, bromine and iodine Demonstrate reactivity of Students to answer
in terms of van der Waals’forces.
elements halogens with iron wool. questions about the
(b) describe the relative reactivity of the elements Cl2, Br2 and I2 in relative activity of
displacement reactions. Students carry out halogens and halide ions.
qualitative test using
(c) explain the trend in (b) in terms of oxidising power, i.e. the
silver ions and aqueous
relative ease with which an electron can be captured.
ammonia.
(d) describe the characteristic reactions of the ions Cl–, Br– and I–
with aqueous silver ions followed by aqueous ammonia (knowledge
of complex formulae not required).
9 Ionic and (a) describe ionic bonding as the electrostatic attraction between Ionic and Covalent dot Questions on dot and
two oppositely-charged ions.
Covalent and cross diagrams. cross diagrams for
Bonding (b) describe, including the use of ‘dot-and-cross’ diagrams, ionic students to complete
bonding, for example, as in sodium chloride and magnesium oxide. Molecular models
(c) describe, in simple terms, the lattice structure of sodium chloride.
Students should use
(d) describe a covalent bond as a shared pair of electrons. bonding to practice
balancing of equations.
(e) describe, including the use of ‘dot-and-cross’ diagrams,
(i) covalent bonding, for example, as in hydrogen, chlorine,
oxygen, hydrogen chloride, water, ammonia, methane,
carbon dioxide and ethene;
(ii) dative covalent (co-ordinate) bonding, for example, as in
the ammonium ion.
10 Predicting (f) explain the shapes of, and bond angles in, molecules and ions by Use of molecular kits to Students to complete
using the qualitative model of electron-pair repulsion for up to 4
molecular demonstrate bond angle questions on bond angles
electron pairs (including lone pairs), for example, as in BF3 (trigonal),
shapes CO2 (linear), CH4 and NH4 and shapes
+ (tetrahedral), NH3 (pyramidal) and H2O (nonlinear).
Students to complete
(g) predict the shapes of, and bond angles in, molecules and ions questions on these
analogous to those specified in (f).
11 Other (k) describe intermolecular forces based on permanent dipoles, as in Definition of Van der Students to complete
hydrogen chloride, and instantaneous dipoles (van der Waals’
attractions Waals forces and H- questions about Van der
forces), as in the noble gases.
bonding – practical Waals and H-bonding.
(l) describe hydrogen bonding between molecules containing –OH involving the formation of
and –NH groups, typified by water and ammonia. ice and structure relating
to water
(m) describe and explain the anomalous properties of water resulting
from hydrogen bonding, for example:
(i) the density of ice compared with water;
(ii) its relatively high freezing point and boiling point.
12 What type (n) describe, in simple terms, the giant molecular structures of Practical where students Exam revision
diamond and graphite.
of bonding? have to decide the type
(o) describe metallic bonding, present in a giant metallic lattice of bonding in a samples
structure, as the attraction of a lattice of positive ions to a sea of of chemicals by carrying
mobile electrons. out chemical and physical
tests.
(p) describe, interpret and/or predict physical properties, for
example: melting and boiling points, electrical conductivity and
solubility in terms of
(i) the types, motion and arrangement of particles (atoms,
molecules and ions) and the forces between them;
(ii) the different types of bonding (ionic bonding, covalent
bonding, hydrogen bonding, other intermolecular
interactions, metallic bonding).