Sei sulla pagina 1di 2

2003 Hewlett-Packard Development Company, L.P.

hp compaq d530 Series Personal Computer


illustrated parts map convertible minitower

HP and the HP logo are trademarks of Hewlett-Packard Development Company, L.P. All other product names mentioned herein may be trademarks of their respective companies.

HP shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided as is without warranty of any kind and is subject to change without notice. The warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. May 2003
Miscellaneous Parts

Document Number 335683-002

1 2 3 4 5 * * *# * * * * * * * * * * * *

Front I/O device Speaker PCI latch kit Hood sensor Solenoid lock with cable 5.25 Bay bezel blank Diskette drive bay bezel blank Heatsink with thermal grease and alcohol pad (see reverse side) Chassis fan Mouse, 2-Button, PS/2 with scroll wheel Mouse, 2-Button, USB, optical with scroll wheel Mouse, 2-Button, wireless with scroll wheel Mouse, 2-Button, USB, with scroll wheel Rubber foot (4 ea) Drive Key, 16 MB Drive Key, 64 MB Drive Key, 128 MB Return kit with buns Real-time-clock battery Port control cover PCI extender card tray

336446-001 326776-001 339808-001 267529-001 336442-001 335937-001 336581-001 333866-001 330457-001 323614-001 323617-001 323616-001 323615-001 336445-001 324780-001 331465-001 331466-001 337910-001 153099-001 340400-001 335817-001

Easy Access Keyboards (not illustrated) PS/2 Wireless USB USB Arabic Belgian BHCSY Brazilian Portuguese Czech Danish Finnish French French Arabic* French Canadian German Greek Hebrew System Unit 1 Front bezel assembly with sub panel, 5.25 bezel blank, and diskette drive bezel (unpainted, for Blue Angel use only) Front bezel assembly with sub panel, 5.25 bezel blank, and diskette drive bezel Computer access panel Chassis assembly Power supply, PFC 336441-001 Hungarian**# International International** 336443-001 336444-001 not spared 308615-001 Italian *not for 323686-xxx **for 324634-xxx only -171 -181 -B41 -181 -221 -081 -351 -051 -DE1 -121 -041 -151 -BB1 -211 -B31 -021 -061 323686-xxx 323745-xxx 324634-xxx 323746-xxx Japanese Korean (Hanguel) LA Spanish Norwegian PRC Polish# Portuguese Russian Slovakian Spanish Swedish Swiss## Taiwanese Thai Turkish U.S. U.K. #for 323686-xxx only ##not for 324634-xxx -291 -AD1 -161 -091 -AA1 -241 -131 -251 -231 -071 -101 -111 -AB1 -281 -141 -001 -031

*Not shown #See back side for more information

Standard and Optional Boards 1 2 PCI extender card System board with alcohol pad and thermal grease 252609-001 323091-001

Memory Modules * * * * * * * * 128 MB/400 MHz FSB 256 MB/400 MHz FSB 512 MB/400 MHz FSB 1.0 GB/400 MHZ FSB 128 MB/333 MHz FSB 256 MB/333 MHz FSB 512 MB/333 MHz FSB 1.0 GB/333 MHZ FSB 335697-001 335698-001 335699-001 335700-001 314795-001 314793-001 314796-001 314794-001

1 2 3 4

Intel Processors with alcohol pad and thermal grease Mass Storage Devices (not illustrated) 40 GB\5400 RPM Hard drive 80 GB\5400 RPM Hard drive 40 GB\7200 RPM Hard drive 80 GB\7200 RPM Hard drive 160 GB/7200 RPM Hard drive Diskette drive with mounting screws 48X CD-ROM drive with mounting screws 48X/24X/48X CDRW 48X/24X/48X +16X DVD/CD-RW 4X DVD+R/RW 16/40X DVD ROM Drive Zip 250 Drive with mounting bracket Zip 250 drive without mounting bracket PC MCIA drive bay reader MultiBay drive adapter 24X/10X/24X/8X CD-RW/DVD-ROM MultiBay drive 24X CED-ROM MultiBay drive 24/10/24X CD-RW MultiBay drive 8X/24X DVD-ROM MultiBay drive 236921-001 292208-001 286692-001 250185-001 325306-001 333505-001 326773-001 325308-001 325309-001 325317-001 325313-001 333504-001 326772-001 331589-001 335805-001 325312-001 325314-001 325315-001 325316-001 Cables 1 2 3 4 *# *# *# * IDE cable, 15.25, two device (108950-047) Power switch/LED cable with switch holder Diskette drive cable (143218-006) IDE cable, 12.5, two device (108950-046) DVI graphics cable VGA graphics cable DVI-VGA graphics adapter CD-ROM Audio cable (387527-001) 336448-001 336447-001 333875-001 333876-001 285380-001 285379-001 202997-001 149806-001 * * * * * * * * * * * * * Celeron 2.0 GHz processor Celeron 2.2 GHz processor Celeron 2.3 GHz processor Pentium 2.4 GHz processor Pentium 2.53 GHz processor Pentium 2.66 GHz processor Pentium 2.8 GHz processor Pentium 3.0 GHz processor Pentium 2.4 GHz processor with Hyperthreading Pentium 2.6 GHz processor with Hyperthreading Pentium 2.8 GHz processor with Hyperthreading Pentium 3.0 GHz processor with Hyperthreading Pentium 3.2 GHz processor with Hyperthreading 309578-001 321723-001 335136-001 288689-001 333485-001 305579-001 305051-001 315637-001 335812-001 333863-001 333864-001 333865-001 335813-001

Other Cards * * * * * * * * * TPM security module Broadcom Gigabit NIC Intel Gigabit NIC Wireless LAN PCI Adapter (802.11) nVidia GeForce2 MX400, 32 M, ATX bkt nVidia GeForce4 MX440, 64 M, ATX bkt nVidia Quadro4 400 NVS, 64M, ATX bkt nVidia Quadro4 200 NVS, 32 M, ATX bkt nVidia Quadro4 100 NVS, 64 M, ATX bkt nVidia Quadro4 100 NVS, PCI, 64 M, ATX bkt AGP card with DVI output, low profile bkt DVI ADD 4-layer card 320163-001 321793-001 314901-001 332963-001 309492-001 322891-001 274623-001 274622-001 322893-001 322892-001 335815-001 325833-001

*Not shown #Use with 322893-001, 274623-001, and 274622-001

Easy Access Keyboards (not illustrated) PS/2 Danish French German -081 -051 -041 325445-xxx International Italian Swedish -B31 -061 -101

Miscellaneous Screw Kit (not illustrated) Miscellaneous screw kit M3 x 5mm, hitop (263585-001) 4 ea #6-32 x .250, hitop (262508-001) 8 ea #6-32 x .250, pan head (101517-037) 3 ea #6-32 x .312, hitop (262508-002) 4 ea #6-19 x .312, pan head (101346-068) 2 ea #6-19 x .315, T15 head (331310-001) 2 ea 337237-001

* * *

*Not shown

Keyboard Diagnostic LEDs, PS/2 Keyboards O nly LED Num, Caps, Scroll Lock Num Lock Caps Lock Num, Caps, Scroll Lock Color Green Green Green Green LED Activity On (Rising Tone) On On Blink On in sequence, one at a time - N, C, SL State/Message ROM reflashed successfully ROMPaq diskette not present, is bad, or drive not ready.* Enter password. Keyboard locked in network mode

* Insert valid ROMPaq diskette in drive A. Turn power switch off, then on to reflash ROM. If ROM flash is successful, all three keyboard LEDs will light up, and you will hear a rising tone series of beeps. Remove diskette and turn power off, then on to restart the computer. For more information about flashing the ROM, refer to the Troubleshooting guide.

Clearing CMOS* The computer's configuration (CMOS) may occasionally be corrupted. If it is, it is necessary to clear the CMOS memory using switch SW50. To clear and reset the configuration, perform the following procedure: 1. Prepare the computer for disassembly.

System Board Connectors and Jumpers (position of some untitled components may vary in location) E49 J20 J21 J22 J30 J40 P1 P3 P5 P6 P7 P8 P10 P11 P14 P16 P20 Password jumper PCI slot 1 PCI slot 2 PCI slot 3 PCI slot extender AGP slot Main power (20 pin) CPU regulator power (4 pin) Front panel Internal chassis speaker CD audio in Chassis fan Diskette drive Aux audio in Boot block Power supply fan control Primary IDE P21 P23 P27 P29 P30 P31 P54 P70 P124 P125 SW50 XBT1 XMM1 XMM2 XMM3 XMM4 XU100 Secondary IDE Front audio/USB Miulti Bay SCSI LED Primary Serial ATA (SATA) Port Secondary Serial ATA (SATA) Port Serial Port B CPU fan Hood lock Hood sensor CMOS button Battery Memory socket Memory socket Memory socket Memory socket Security

2. 3. 4. 5.

CAUTION: The power cord must be disconnected from the power source before pushing the Clear CMOS Button (NOTE: All LEDs on the board should be OFF). Failure to do so may damage the system board Remove the access panel. Press the CMOS button located on the system board and keep it depressed for 5 seconds. Replace the access panel. Turn the computer on and run F10 Computer Setup (Setup-utility) to reconfigure the system.

*When the CMOS button is pushed or the jumper is removed, both the power-on password and the setup password become invalid because both are stored in the configuration memory. You will need to reset the passwords. Disabling or Clearing the Power-On and Setup Passwords* 1. 2. 3. 4. 5. 6. 7. 8. Turn off the computer and any external devices, and disconnect the power cord from the power outlet. Remove the access panel. Locate the header and jumper labeled E49. Remove the jumper from pins 1 and 2. Place the jumper over pin 2 only, in order to avoid losing it. Replace the access panel. Plug in the computer and turn on power. Allow the operating system to start. NOTE: Placing the jumper on pin 2 clears the current passwords and disables the password features. To re-enable the password features, repeat steps 1-3, then replace the jumper on pins 1 and 2. Repeat steps 5-6, then establish new passwords.

Refer to the Computer Setup (F10 Setup) instructions to establish new passwords. *When the CMOS button is pushed or the jumper is removed, both the power-on password and the setup password become invalid because both are stored in the configuration memory. You will need to reset the passwords.

Computer Setup (F10) Utility Features (not all features may be available) File Storage System Information About Set Time and date Device Configuration Options Setup Password Power-On Password Password Options Smart Cover Power-On Options Onboard devices Save to Diskette Restore From Diskette Set defaults and Exit IDE DPS Self-Test Controller Order Smart Sensor DriveLock Master Boot Record Security Save Master Boot Record PCI Devices Bus Options Ignore Changes and Exit Save Changes and Exit SCSI Narrow Termination Boot Order Restore Master Boot Record Device Security Network Service Boot System IDs Devise Options PCI VGA Configuration

Security

Advanced

Note: See Computer Setup (F10) Utility Guide on the Documentation Library CD. Interchangeable Heatsinks PCI Extender Card Connectors and Jumpers J23 J24 PCI slot 4 PCI slot 5 P30 Male expansion plug

System Hardware Interrupts IRQ 0 1 2 3 4 5 6 7 System Function Timer Interrupt Keyboard Interrupt Controller Cascade Serial Port (COM B) Serial Port (COM A) Unused, available for PCI Diskette Drive Parallel Port (LPT 1) IRQ 8 9 10 11 12 13 14 15 System Function Real-Time Clock Unused Unused, available for PCI Unused, available for PCI Mouse Coprocessor Primary ATA (IDE) Controller Secondary ATA (IDE) Controller Heat Sink Removal

Computer Diagnostic LEDs (on front of computer) LED Power Power Power Power Power Power Power Power Power Power Power Power Power Hard Drive Color Green Green Green Green Clear Red Red* Red* Red* Red* Red* Red* Red* Green LED Activity On 1 blink every 2 seconds 1 blink every 2 seconds Off Off 1 blink followed by 2-second pause - Repeat 2 blinks 1 second apart 3 blinks 1 second apart 4 blinks 1 second apart 5 blinks 1 second apart 6 blinks 1 second apart 7 blinks 1 second apart 8 blinks 1 second apart Blinking State/Message (S0) Computer on (S1) Suspend Mode (S3) Suspend to RAM (S4) Suspend to Disk (if applicable) (S5) Computer off Power Supply failure CPU thermal shutdown CPU not installed Power supply overload ( crow bar) No memory No graphics System board failure (detected prior to video) Invalid ROM Hard drive activity

*Blinking codes are repeated after a 2 second pause.

Potrebbero piacerti anche