Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Document History
Document History
Topic
General
Description
The Traps and Alarms (formerly an Appendix to the system manual) has been separated from the manual. Addedd Sources: AVU-FAN# (applicable for rbShelfPeripheralEquipmentFaultOn/Off Traps) Sources for the rbConfigurationChanged Trap
Date Issued
SW Version 2.0, February 2006 SW Version 2.5, June 2006
Section 2
rbConfigurationChanged Trap
Section 5.3.1.
New NPU/Micro Base Station related traps (License)
Additional Sources added. Updated Additional Info options to support types of configuration changes: add, delete or modify. New traps: rbMbstLicense rbMbstCPEQuantityExceed rbLicenseFileLoadStatus
Section 5.4.5.
New SU related trap New trap: rbSuLicense
Section 5.5.4.
ODU CRC Error traps removed General Traps rbOduCrcErrorOn and rbOduCrcErrorOff traps are obsolete from SW Version 2.6 New trap: rbModeConflictOn Trap
Section 5.1.7
Changed trap severity Severity of rbOduBandMissmatchOn trap has been changed to Major. Source of Service Related traps (rbServiceDown, rbServiceUp, rbServiceChanged and rbServiceGeneralError) has been changed to NPU/BST New Alarms: auOduComError (28) and auOduBandMismatch (29).
SW Version 3.0 April 2007 SW Version 3.0 April 2007 SW Version 3.0 April 2007
Section 5.4.3
Service Related traps
Section 5.7
New Alarms
ii
Document History
Topic
Alarms
Description
Order of Alarms has been changed according to Alarm ID.
Date Issued
SW Version 3.0 April 2007
Section 6
iii
Legal Rights
Legal Rights
Copyright 2007 Alvarion Ltd. All rights reserved. The material contained herein is proprietary, privileged, and confidential and owned by Alvarion or its third party licensors. No disclosure thereof shall be made to third parties without the express written permission of Alvarion Ltd. Alvarion Ltd. reserves the right to alter the equipment specifications and descriptions in this publication without prior notice. No part of this publication shall be deemed to be part of any contract or warranty unless specifically incorporated by reference into such contract or warranty.
Trade Names
Alvarion, BreezeCOM, WALKair, WALKnet, BreezeNET, BreezeACCESS, BreezeMANAGE, BreezeLINK, BreezeCONFIG, BreezeMAX, AlvariSTAR, BreezeLITE, AlvariCRAFT, MGW, eMGW, and/or other products and/or services referenced here in are either registered trademarks, trademarks or service marks of Alvarion Ltd. All other names are or may be the trademarks of their respective owners.
Statement of Conditions
The information contained in this manual is subject to change without notice. Alvarion Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual or equipment supplied with it.
Exclusive Warranty
(a) Alvarion warrants that the Product hardware it supplies and the tangible media on which any software is installed, under normal use and conditions, will be free from significant defects in materials and workmanship for a period of fourteen (14) months from the date of shipment of a given Product to Purchaser (the "Warranty Period"). Alvarion will, at its sole option and as Purchaser's sole remedy, repair or replace any defective Product in accordance with Alvarion' standard R&R procedure. (b) With respect to the Firmware, Alvarion warrants the correct functionality according to the attached documentation, for a period of fourteen (14) month from
iv
Legal Rights
invoice date (the "Warranty Period")". During the Warranty Period, Alvarion may release to its Customers firmware updates, which include additional performance improvements and/or bug fixes, upon availability (the "Warranty"). Bug fixes, temporary patches and/or workarounds may be supplied as Firmware updates. Additional hardware, if required, to install or use Firmware updates must be purchased by the Customer. Alvarion will be obligated to support solely the two (2) most recent Software major releases. ALVARION SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY PURCHASER'S OR ANY THIRD PERSON'S MISUSE, NEGLIGENCE, IMPROPER INSTALLATION OR IMPROPER TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING OR OTHER HAZARD.
Disclaimer
(a) The Software is sold on an "AS IS" basis. Alvarion, its affiliates or its licensors MAKE NO WARRANTIES, WHATSOEVER, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THE SOFTWARE AND THE ACCOMPANYING DOCUMENTATION. ALVARION SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT WITH RESPECT TO THE SOFTWARE. UNITS OF PRODUCT (INCLUDING ALL THE SOFTWARE) DELIVERED TO PURCHASER HEREUNDER ARE NOT FAULT-TOLERANT AND ARE NOT DESIGNED, MANUFACTURED OR INTENDED FOR USE OR RESALE IN APPLICATIONS WHERE THE FAILURE, MALFUNCTION OR INACCURACY OF PRODUCTS CARRIES A RISK OF DEATH OR BODILY INJURY OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE ("HIGH RISK ACTIVITIES"). HIGH RISK ACTIVITIES MAY INCLUDE, BUT ARE NOT LIMITED TO, USE AS PART OF ON-LINE CONTROL SYSTEMS IN HAZARDOUS ENVIRONMENTS REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS IN THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT MACHINES, WEAPONS SYSTEMS OR OTHER APPLICATIONS REPRESENTING A SIMILAR DEGREE OF POTENTIAL HAZARD. ALVARION SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES. (b) PURCHASER'S SOLE REMEDY FOR BREACH OF THE EXPRESS WARRANTIES ABOVE SHALL BE REPLACEMENT OR REFUND OF THE PURCHASE PRICE AS SPECIFIED ABOVE, AT ALVARION'S OPTION. TO THE FULLEST EXTENT ALLOWED BY LAW, THE WARRANTIES AND REMEDIES SET FORTH IN THIS AGREEMENT ARE EXCLUSIVE AND IN LIEU OF ALL OTHER
Legal Rights
WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING BUT NOT LIMITED TO WARRANTIES, TERMS OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, NON-INFRINGEMENT, AND ACCURACY OF INFORMATION GENERATED. ALL OF WHICH ARE EXPRESSLY DISCLAIMED. ALVARION' WARRANTIES HEREIN RUN ONLY TO PURCHASER, AND ARE NOT EXTENDED TO ANY THIRD PARTIES. ALVARION NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS.
Limitation of Liability
(a) ALVARION SHALL NOT BE LIABLE TO THE PURCHASER OR TO ANY THIRD PARTY, FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF BUSINESS OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHER ARISING UNDER BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE AND WHETHER BASED ON THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. (b) TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE LIABILITY FOR DAMAGES HEREUNDER OF ALVARION OR ITS EMPLOYEES OR AGENTS EXCEED THE PURCHASE PRICE PAID FOR THE PRODUCT BY PURCHASER, NOR SHALL THE AGGREGATE LIABILITY FOR DAMAGES TO ALL PARTIES REGARDING ANY PRODUCT EXCEED THE PURCHASE PRICE PAID FOR THAT PRODUCT BY THAT PARTY (EXCEPT IN THE CASE OF A BREACH OF A PARTY'S CONFIDENTIALITY OBLIGATIONS).
vi
Legal Rights
Important Notice
This user manual is delivered subject to the following conditions and restrictions: This manual contains proprietary information belonging to Alvarion Ltd. Such information is supplied solely for the purpose of assisting properly authorized users of the respective Alvarion products. No part of its contents may be used for any other purpose, disclosed to any person or firm or reproduced by any means, electronic and mechanical, without the express prior written permission of Alvarion Ltd. The text and graphics are for the purpose of illustration and reference only. The specifications on which they are based are subject to change without notice. The software described in this document is furnished under a license. The software may be used or copied only in accordance with the terms of that license. Information in this document is subject to change without notice. Corporate and individual names and data used in examples herein are fictitious unless otherwise noted. Alvarion Ltd. reserves the right to alter the equipment specifications and descriptions in this publication without prior notice. No part of this publication shall be deemed to be part of any contract or warranty unless specifically incorporated by reference into such contract or warranty. The information contained herein is merely descriptive in nature, and does not constitute an offer for the sale of the product described herein. Any changes or modifications of equipment, including opening of the equipment not expressly approved by Alvarion Ltd. will void equipment warranty and any repair thereafter shall be charged for. It could also void the user's authority to operate the equipment.
vii
Contents
1 2 3 4 5 Traps and Alarms Structure .......................................................... 1 Traps and Alarms Sources ............................................................ 2 Traps and Alarms Severities ......................................................... 4 Trap/Alarm Categories................................................................... 5 BreezeMAX Traps .......................................................................... 6
5.1 General Traps ....................................................................................................... 6 5.1.1 5.1.2 5.1.3 5.1.4 5.1.5 5.1.6 5.1.7 5.2 rbResetOn Trap.......................................................................................... 6 rbDiagnosticsHwFaultOn Trap ................................................................... 7 rbDiagnosticsHwFaultOff Trap ................................................................... 8 rbMonitorAccessOn Trap............................................................................ 9 rbMonitorAccessOff Trap............................................................................ 9 rbAuNetworkEntryStatus Trap.................................................................. 10 rbModeConflictOn Trap ............................................................................ 10
Chassis/Micro Base Station Related Traps ..................................................... 11 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 rbShelfCardExtractionOn Trap ................................................................. 11 rbShelfCardInsertionOn Trap ................................................................... 11 rbShelfPeripheralEquipmentFaultOn Trap ............................................... 12 rbShelfPeripheralEquipmentFaultOff Trap ............................................... 12 rbShelfEnvParamFaultOn Trap ................................................................ 13 rbShelfEnvParamFaultOff Trap ................................................................ 14
5.3
NPU/Micro Base Station Related Traps ........................................................... 15 5.3.1 5.3.2 rbConfigurationChanged Trap .................................................................. 15 rbParameterSetFailure Trap..................................................................... 15
Contents
ODU Related Traps ............................................................................................ 19 5.4.1 5.4.2 5.4.3 5.4.4 5.4.5 rbOduCommErrorOn Trap........................................................................ 19 rbOduCommErrorOff Trap........................................................................ 19 rbOduBandMissmatchOn Trap................................................................. 20 rbOduBandMissmatchOff Trap................................................................. 20 rbOduPowerMissmatch Trap.................................................................... 20
5.5
SU Related Traps ............................................................................................... 21 5.5.1 5.5.2 5.5.3 5.5.4 5.5.5 rbSuMaxTxPowerReached Trap .............................................................. 21 rbSuMinTxPowerReached Trap ............................................................... 21 rbSuNetworkEntryStatus Trap.................................................................. 22 rbSuLicense Trap ..................................................................................... 22 rbSuDuplicateName Trap ......................................................................... 23
5.6
Software Download and BER Test Related Traps........................................... 24 5.6.1 5.6.2 5.6.3 5.6.4 5.6.5 5.6.6 5.6.7 rbSwDownloadStart Trap ......................................................................... 24 rbSwDownloadEnd Trap .......................................................................... 24 rbSwDownloadError Trap ......................................................................... 25 rbSwSwitchFailed Trap............................................................................. 27 rbSwSwitchSucceed Trap ........................................................................ 27 rbBERTestFinished Trap .......................................................................... 28 rbBERTestStarted Trap ............................................................................ 28
5.7
Service Related Traps ....................................................................................... 29 5.7.1 5.7.2 rbServiceDown Trap................................................................................. 29 rbServiceUp Trap ..................................................................................... 29
Contents
MIB II Traps......................................................................................................... 32 5.8.1 5.8.2 5.8.3 5.8.4 5.8.5 coldStart Trap ........................................................................................... 32 warmStart Trap......................................................................................... 32 linkDown Trap .......................................................................................... 32 linkUp Trap ............................................................................................... 33 authenticationFailure Trap........................................................................ 34
Active Alarms............................................................................... 35
6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 DiagnosticsHwFaultOn Alarm........................................................................... 35 MonitorAccessOn Alarm ................................................................................... 36 ShelfCardExtractionOn Alarm .......................................................................... 37 ShelfPeripheralEquipmentFaultOn Alarm ....................................................... 37 ShelfEnvParamFaultOn Alarm .......................................................................... 38 OduCommErrorOn Alarm.................................................................................. 38 OduBandMissmatchOn Alarm .......................................................................... 39 SwDownloadStart Alarm ................................................................................... 39 SwDownloadError Alarm................................................................................... 40
6.10 SwSwitchFailed Alarm....................................................................................... 40 6.11 LinkDown Alarm................................................................................................. 40 6.12 AuthenticationFailure Alarm ............................................................................. 41
xi
Trap Variable
rbTrapSeqNumber
Alarm Variable
NA
Description
Trap Sequential Number: A sequential number for the trap/alarm. Trap/Alarm Source: The device that is associated with the trap/alarm. For more information refer to Section 2. Trap/Alarm Severity: The severity of the trap/alarm. For more details refer to Section 3. Trap/Alarm Category: The category of the trap/alarm. For more details refer to Section 4. Trap/Alarm Additional Info: Optional information on the reason for the trap/alarm, if applicable.
rbTrapSource
src
rbTrapSeverity
sev
rbTrapCategory
cat
rbTrapAdditionalInfo
<Reason String>
Figure 1: Base Station's Chassis Slots Assignment Service: Identified through binding parameters rather than the source. The binding parameters used to identify a Service are: Service Index, Service Name, Subscriber Index, and Subscriber ID. The following are used as Sources only for the rbConfigurationChanged TRAP:
Radio Cluster (RC): RadioClusterId#. ODU: OduConfigId#. Channel (CHNL): AuSlot# ,ChannelId#. Subscriber (SBSCR): SubscriberIdx#. Service (SRVC): PipeIdx#>, Priority Classifier (POLICY): RuleIdx#>. QoS Profile (QOS): ProfileIdx#. Forwarding Rule (FRWRD): RuleIdx#. Service Profile (TMPL): ProfileIdx#. Layer 2 Filtering Rule (FLTR2): RuleIdx#. Layer 3/4 Filtering Rule (FLTR3): RuleIdx#. Interface Filter (FLTRIFC): FilteringIdx#. Filtering Rule (FLTR): RuleIdx#. Deny List (DENY): SUs MAC Address.
Description
Indicates that a service affecting condition has occurred and an immediate corrective action is required (e.g. when a managed object becomes completely out of service and its capability must be restored). Indicates that a service affecting condition has developed and an urgent corrective action is required (e.g. when there is severe degradation in the capability of the managed object and its full capability must be restored). Indicates the existence of a non-service affecting fault condition and that a corrective action should be taken in order to prevent a more serious (for example, service affecting) fault. Indicates the detection of a potential or impending service-affecting fault, before any significant effects have been felt. Action should be taken to further diagnose (if necessary) and correct the problem in order to prevent it from becoming a more serious service-affecting fault. Indicates a non service-affecting event, which doesn't require any further actions.
Major
Minor
Warning
Info
The severity of the alarm affects also the following: Unit Fault Status: The summarized severity of the unit's fault status. It reflects the severity of the alarm with the highest severity that is ON at a specific time. For a Base Station, this is the summarized severities of the NPU, AUs, PIUs, PSUs and AVU. System Fault Status: The summarized severity of the entire system fault status.
Trap/Alarm Categories
Trap/Alarm Categories
The type of trap/alarm categorizes it into one of the following five basic categories (as stated in ITU - CCITT Rec. X.733):
Denoting String
COMM
Description
Associated with the procedures and/or processes required to convey information from one point to another. Associated with degradation in the quality of a service. Associated with software or processing fault. Associated with an equipment fault. Associated with a condition relating to an enclosure in which the equipment resides.
BreezeMAX Traps
BreezeMAX Traps
BreezeMAX traps include the following trap groups: General Traps on page 6 Chassis/Micro Base Station Related Traps on page 11 NPU/Micro Base Station Related Traps on page 15 ODU Related Traps on page 19 SU Related Traps on page 21 Software Download and BER Test Related Traps on page 24 Service Related Traps on page 29 MIB II Traps on page 32
5.1
5.1.1
General Traps
rbResetOn Trap
Table 4: rbResetOn Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
1 The device/card is about to perform reset. BST/NPU/AU/SU Info Equipment 1, 2 (see details in the following table)
Description
External Reset Internal Fault Reset
BreezeMAX Traps
5.1.2
rbDiagnosticsHwFaultOn Trap
Table 6: rbDiagnosticsHwFaultOn Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
2 The device/card has detected a hardware fault. BST/NPU/AU/SU Major Equipment 3...8, 23...27 (see details in the following table)
BreezeMAX Traps
Description
SU HW fault. Manta's (ASIC) PLL is not locked for more than 5 msec. SU HW fault. Manta's (ASIC) PLL is not locked in steady state. SU HW fault. Host failed to download Manta's firmware (complete with CRC errors, or handshake error). SU HW fault. Radio's PLL is not locked after power up sequence. SU HW fault. Radio's PLL is not locked in steady state. SU, AU, NPU or BST HW fault. A Built In Test (BIT) has failed. BST/AU HW fault. Output Tx Power exceeds PMAX+5dB for more than 5 minutes. BST/AU HW fault. When a process to burn IDU table fails (CRC check on finish fails, FTP session failed, no place in FFS). BST/AU HW fault. IF synthesizer failed to lock on the frequency set on the synthesizer. BST/AU HW fault. BST/AU detected an error while downloading the ODU table. The string includes also the byte number of the ODU table where the error was detected. BST/AU HW fault. Connection between BST/AU and ODU has been lost.
6 7 8 23
24
25
26
27
5.1.3
rbDiagnosticsHwFaultOff Trap
Table 8: rbDiagnosticsHwFaultOff Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
3 A previously detected hardware fault has been fixed. BST/NPU/AU/SU Equipment Info 3...8, 23...27. For details see Additional Info in rbDiagnosticsHwFaultOn/Off Trap Additional Info table above.
BreezeMAX Traps
5.1.4
rbMonitorAccessOn Trap
Table 9: rbMonitorAccessOn Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
4 The device is accessed via LCI (Monitor port) or Telnet. BST/NPU/SU Info Equipment 140, 141. For details see the following table. In addition, the IP Address of the station accessing the device is sent as a binding parameter (rbTrapIpAddress).
Description
LCI (Monitor port) access has been detected. Telnet access has been detected.
5.1.5
rbMonitorAccessOff Trap
Table 11: rbMonitorAccessOff Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
5 LCI (Monitor port) or Telnet access to the device has been terminated. BST/NPU/SU Info Equipment 140, 141. For details see rbMonitorAccessOn/Off Trap Additional Info table above. In addition, the IP Address of the station accessing the device is sent as a binding parameter (rbTrapIpAddress).
BreezeMAX Traps
5.1.6
rbAuNetworkEntryStatus Trap
Table 12: rbAuNetworkEntryStatus Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
6 BST/AU Network Entry status has been changed BST/AU Info Communication 135...139
Description
BST/AU DHCP process failed BST/AU configuration download failed BST/AU set parameters failed BST/AU firmware download failed BST/AU is in service
5.1.7
rbModeConflictOn Trap
Table 14: rbModeConflictOn Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
7 Conflict between configuration and units capabilities has been detected. AU/SU Major Communication 144: Diversity Mode Mismatch: the AU does not support the configured diversity mode.
10
BreezeMAX Traps
5.2
5.2.1
rbShelfCardExtractionOn Trap
Table 15: rbShelfCardExtractionOn Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category
Description
21 The card is being extracted from the chassis. NPU/AU/PIU/PSU/AVU Info Equipment
5.2.2
rbShelfCardInsertionOn Trap
Table 16: rbShelfCardInsertionOn Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category
Description
22 The card is being inserted into the chassis. NPU/AU/PIU/AU/AVU Info Equipment
11
BreezeMAX Traps
5.2.3
rbShelfPeripheralEquipmentFaultOn Trap
Table 17: rbShelfPeripheralEquipmentFaultOn Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
23 A fault has been detected in a peripheral unit or a BST component. BST/PIU/PSU/AVU/AVU-FAN Minor Equipment 53...55
Description
A fault has been detected in a PSU, or BST has detected a power supply failure. A fault has been detected in a PIU (not applicable to BST). A fault has been detected in the AVU, or the BST has detected a problem in at least one of its fans.
54 55
5.2.4
rbShelfPeripheralEquipmentFaultOff Trap
Table 19: rbShelfPeripheralEquipmentFaultOff Trap
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
24 A fault in a peripheral unit has been corrected. BST/PIU/PSU/AVU/AVU-FAN Info Equipment 53...55. See details in the following table.
12
BreezeMAX Traps
Description
NPU/BST has detected that the faulty PSU/power supply has become fully operational. NPU has detected that the faulty PIU has become fully operational. NPU/BST has detected that the faulty AVU/fan has become fully operational
54 55
5.2.5
rbShelfEnvParamFaultOn Trap
Table 21: rbShelfEnvParamFaultOn Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
25 A fault has been detected in a chassis environmental parameter. BST/NPU Info Equipment 73...76. For details see the following table.
Description
A fault has been detected in the dry contacts of NPU/BST. An NPU/BST temperature fault has been detected. An AU-IDU temperature fault has been detected. An AU-ODU temperature fault has been detected.
13
BreezeMAX Traps
5.2.6
rbShelfEnvParamFaultOff Trap
Table 23: rbShelfEnvParamFaultOff Trap
Variable
Trap ID Description
Description
26 A previously detected fault in a chassis environmental parameter has been fixed. BST/NPU Info Equipment 73...76. For details see rbShelfEnvParamFaultOn/Off Trap Additional Info table above.
14
BreezeMAX Traps
5.3
5.3.1
Variable
Trap ID Description Trap Source
Description
41 A configuration change has been detected. BST/NPU/AU/SU/PSU/PIU/AVU/AVU-FAN/Radio Cluster/ODU/Channel/ Subscriber/Service/Priority Classifier/(Policy Rule)/QoS Profile/ Forwarding Rule/Service Profile (Template)/Layer 2 Filtering Rule, Layer 3/4 Filtering Rule/Interface Filtering/ Filtering Rule/MAC Address Deny List Info Equipment 30...33. For details see the following table.
Description
Configuration changed - element added event. Configuration changed - element deleted event. Configuration changed - element modified event. A Management Port parameter has been changed.
5.3.2
rbParameterSetFailure Trap
Table 26: rbParameterSetFailure Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
42 An error in configuration change has been detected. BST/NPU/AU/SU Info Equipment Provided in Table 27 below.
15
BreezeMAX Traps
Description
General Error Failed to update parameters CRC Set defaults to unknown type (internal error) Failed to set defaults (internal error) Log prefix is too long Failed to set Log Prefix (internal error) Cell Radius is invalid Failed to set Cell Radius Failed to set Base Station ID (internal error) Failed to set Base Station Mask (internal error) Failed to set ARQ mode (internal error) Failed to set Band (internal error) Tx Frequency is out of calculated limited range Tx frequency is invalid Tx frequency is out of maximum permitted range Tx Frequency set failed (internal error) Tx Power value is invalid Set Tx Power Failed (internal error) UL Basic rate is invalid Failed to set Uplink Basic Rate (internal error) DL Basic rate is invalid Failed to set Downlink Basic Rate (internal error) It is forbidden to set SU rate while Multirate is enabled Invalid Downlink rate Invalid Uplink rate Invalid Optimal RSSI Set Optimal RSSI failed (internal error) BER Test data size is less than minimum allowed BER Test data size is higher than the maximum allowed BER Test is already running Invalid BER Test Rate
16
BreezeMAX Traps
Description
Invalid BER Test Priority Failed to set Test Priority for BER Test (internal error) Invalid BER Test packet size Failed to set BER Test packet size (internal error) Failed to create connection for the BER test Failed to disconnect Telnet session Invalid Ethernet Port configuration mode Set Ethernet Port mode failed (internal error) SU Installer password is too long Set SU Installer password failed (internal error) Invalid Band Invalid Aging Time or internal error Invalid Limit of Supported devices or internal error Failed to set Limit mode - invalid value or internal error
5.3.3
rbMbstLicense Trap
Table 28: rbMbstLicense Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
50 License Grace Period warning. BST Info PROC 184, 185. For details see the following table.
Description
Grace Period started Grace Period expired
17
BreezeMAX Traps
5.3.4
rbMbstCPEQuantityExceed Trap
Table 30: rbMbstCPEQuantityExceed Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
51 Allowed quantity of CPEs has been exceeded. BST Info PROC The MAC Address of rejected SU (rbSuMacAddr) is sent as a binding parameter.
5.3.5
rbLicenseFileLoadStatus Trap
Table 31: rbLicenseFileLoadStatus Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
52 License file loading process status. BST/NPU Info PROC 187...191. For details see the following table.
Description
License file loaded to wrong device (MAC address conflict). Wrong signature of license file. License file syntax error. Wrong number of CPEs in Micro Base station Number of Supported CPEs license file. License file already exists in database.
191
18
BreezeMAX Traps
5.4
5.4.1
rbOduCommErrorOn Trap
Table 33: rbOduCommErrorOn Trap Variables
Variable
Trap ID Description
Description
63 An error has been detected in the communication with the ODU associated with the specified Channel ID. BST/AU Minor Communication
5.4.2
rbOduCommErrorOff Trap
Table 34: rbOduCommErrorOff Trap Variables
Variable
Trap ID Description
Description
64 A previously detected error in the communication with the ODU associated with the specified Channel ID has been fixed. BST/AU Info Communication
19
BreezeMAX Traps
5.4.3
rbOduBandMissmatchOn Trap
Table 35: rbOduBandMissmatchOn Trap Variables
Variable
Trap ID Description
Description
65 A mismatch was detected between the Configured Frequency Band and actual band supported by the HW of the ODU associated with the specified Channel ID. BST/AU Major Communication
5.4.4
rbOduBandMissmatchOff Trap
Table 36: rbOduBandMissmatchOff Trap Variables
Variable
Trap ID Description
Description
66 A previously detected mismatch between the Configured Frequency Band and actual band supported by the HW of the ODU associated with the specified Channel ID was fixed. BST/AU Info Communication
5.4.5
rbOduPowerMissmatch Trap
Table 37: rbOduPowerMissmatch Trap Variables
Variable
Trap ID Description
Description
67 Configured Tx Power of the ODU associated with the specified Channel ID is higher than the actual Maximum Tx Power of the ODU. BST/AU Info Communication
20
BreezeMAX Traps
5.5
5.5.1
SU Related Traps
rbSuMaxTxPowerReached Trap
Table 38: rbSuMaxTxPowerReached Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
81 The SU has reached the maximum allowed output power. SU Info PROC The Tx Power (rbSuTxPower) is sent as a binding parameter
5.5.2
rbSuMinTxPowerReached Trap
Table 39: rbSuMinTxPowerReached Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
82 The SU has reached the minimum allowed output power. SU Info PROC The Tx Power (rbSuTxPower) is sent as a binding parameter
21
BreezeMAX Traps
5.5.3
rbSuNetworkEntryStatus Trap
Table 40: rbSuNetworkEntryStatus Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
83 SU's network entry status has been changed. SU Info PROC 132...134. For details see the following table.
Description
Authentication process failed Registration process failed Registration process completed successfully
5.5.4
rbSuLicense Trap
Table 42: rrbSuLicense Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
84 License Grace Period warning. SU Info PROC 182...186. For details see the following table. In addition, rbLicenseId (Type of License) is sent as a binding parameter. The currently supported value for rbLicenseId is bandwidth (1).
Description
Temporary Grace Period started. Temporary Grace Period expired.
22
BreezeMAX Traps
Description
Grace Period started. Grace Period expired. Grace Period will expire in 3 days.
5.5.5
rbSuDuplicateName Trap
Table 44: 5.5.4rbSuDuplicateName Trap Variables
Variable
Trap ID Description
Description
85 The SU Name is already in use by another SU. Services to the SU will be denied until another, unique name is configured for the SU. The SU's name in the database is changed temporarily to SU@<MAC Address> until a new name is configured.The binding parameters include the MAC Address of the other SU with the same name, the duplicate name and the new temporary name. SU Major PROC
23
BreezeMAX Traps
5.6
5.6.1
rbSwDownloadStart Trap
Table 45: rbSwDownloadStart Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category
Description
101 SW download process has started. BST/NPU/AU/SU Info PROC
5.6.2
rbSwDownloadEnd Trap
Table 46: rbSwDownloadEnd Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category
Description
102 SW download process has been finished. BST/NPU/AU/SU Info PROC
24
BreezeMAX Traps
5.6.3
rbSwDownloadError Trap
Table 47: rbSwDownloadError Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
103 An error has been detected in the SW download process. BST/NPU/AU/SU Minor PROC 100...103, 150..181. See details in the following table.
NOTE
Additional Info 150181 details reasons for AU/SU SW download failures.
Description
Unsupported Software version has been detected. This trap is generated by a BST/NPU when there is no compatibility between versions (BST/NPU, AU or SU). It is generated by AU and SU when there is no compatibility with corresponding SU or AU versions. The requested SW version is not available at BST/NPU site. This trap is generated only by BST/NPU. SW download process failed. No space available in disk. There are already 3 SW versions in BST/NPU for AU/SU, and another version is being downloaded. Download is aborted by an external event. Header's "HW Version" is not compatible with the real unit's HW Header's "HW Config" is not compatible with the real unit's HW Failure to create a new file on Flash Failure to open file on Flash Failure to get file statistics (size..) Failure to read from file Failure to write to file Failure to write information about SW file to the "Info" file
101
102 103
25
BreezeMAX Traps
Description
Can not Access Flash using File System Old Shadow file is not accessible and can not be removed NPU/BST File Signature is not recognized File does not contain header File's header is too long Some header's field title or format is not recognized Header's "Unit Type" field does not match current Unit (Trying to Download wrong SW) RF Version should be checked but is not found in header Header's "RF Revision" is not compatible with the real unit's RF CRC calculation failed Calculated CRC does not match CRC in the header Calculated file size does not match file size in the header Failure to start TFTP client Error is received during TFTP Failure to read received data from TFTP data socket TFTP data socket is empty Another TFTP session is already in process File name is not set properly File size exceeds the maximum size that can be downloaded to AU/SU Files with extension other than ".bz" can not be downloaded to AU/SU File exists as Main and can not be removed File is not available Communication timeout
166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181
26
BreezeMAX Traps
5.6.4
rbSwSwitchFailed Trap
Table 49: rbSwSwitchFailed Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
104 Software switch-over failed BST/NPU/AU/SU Minor PROC 104, 105. See details in the following table
Description
Run from shadow action Set as Main action
5.6.5
rbSwSwitchSucceed Trap
Table 51: rbSwSwitchSucceed Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
105 Software switch-over succeeded BST/NPU/AU/SU Info PROC 105 (Set as Main action)
27
BreezeMAX Traps
5.6.6
rbBERTestFinished Trap
Table 52: rbBERTestFinished Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category
Description
106 BER Test finished SU Info PROC
5.6.7
rbBERTestStarted Trap
Table 53: rbBERTestStarted Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category
Description
107 BER Test has started SU Info PROC
28
BreezeMAX Traps
5.7
5.7.1
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
111 The Service is down NPU/BST Major QoS rbServiceIdx, rbSubscriberIdx, rbServiceName, rbSubscriberID included as binding parameters.
5.7.2
rbServiceUp Trap
Table 55: rbServiceUp Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
112 The service has become operational NPU/BST Info QoS rbServiceIdx, rbSubscriberIdx, rbServiceName, rbSubscriberID included as binding parameters.
29
BreezeMAX Traps
5.7.3
rbServiceChanged Trap
Table 56: rbServiceChanged Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
113 The Service properties have been modified NPU/BST Info QoS 119...122. See details in the following table. In addition, rbServiceIdx, rbSubscriberIdx, rbServiceName, rbSubscriberID included as binding parameters.
Description
Service Admin Status has been changed Service SU MAC Address has been changed Service VLAN List has been changed Service Profile has been changed (implies that another Service Profile has been set)
5.7.4
rbServiceGeneralError Trap
Table 58: rbServiceGeneralError Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
114 A Service error has been detected NPU/BST Minor QoS 111...118. See details in the following table. In addition, rbServiceIdx, rbSubscriberIdx, rbServiceName, rbSubscriberID included as binding parameters.
30
BreezeMAX Traps
Description
The maximum allowed number of Subscribers has been reached The maximum allowed number of Service configurations has been reached The maximum allowed number of Service Profile configurations has been reached The maximum allowed number of Forwarding Rules configurations has been reached The maximum allowed number of Policy Rules configurations has been reached The maximum allowed number of QoS Profiles configurations has been reached The maximum allowed number of calls has been reached There is no available bandwidth to allocate to a new VoIP call
114
115
116
117 118
5.7.5
rbNetworkingError Trap
Table 60: rbNetworkingError Trap Variables
Variable
Trap ID Description
Description
115 Networking error has been detected. Services to the SU are denied until the SU is reset from the wireless link side by the NPU/BST. SU Info PROC 10: Loop was detected on SU Ethernet port.
31
BreezeMAX Traps
5.8
5.8.1
MIB II Traps
coldStart Trap
Table 61: coldStart Trap Variables
Variable
Trap ID Description
Description
0 The device is rebooting itself and may change its configuration or the SNMP agent's configuration BST/NPU Info Equipment
5.8.2
warmStart Trap
Table 62: warmStart Trap Variables
Variable
Trap ID Description
Description
1 The device is rebooting itself but neither the device's nor the SNMP agent's configuration will change BST/NPU Info Equipment
5.8.3
linkDown Trap
Table 63: linkDown Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
2 A communication link failure BST/NPU/AU/SU Info Communication 127...131. See details in the following table.
32
BreezeMAX Traps
Description
The Ethernet connection to the backbone has been found to be down. A BST/NPU trap. The Management connection has been found to be down. A BST/NPU trap. The communication to an AU has failed. An AU trap. Radio link has failed completely (loss of communication to all SUs). A BST/AU trap. Radio link to a specific SU has failed. An SU trap.
131
5.8.4
linkUp Trap
Table 65: linkUp Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
3 A communication link that previously failed has become operational. BST/NPU/AU/SU Info Communication 127...131. See details in the following table.
Description
The Ethernet connection to the backbone has been found to be active. A BST/NPU trap. The Management connection has been found to be active. A BST/NPU trap. The communication to an AU has become active. An AU trap. Radio link has become active (at least one SU is synchronized). A BST/AU trap. A new SU has become synchronized (not necessarily registered). An SU trap.
131
33
BreezeMAX Traps
5.8.5
authenticationFailure Trap
Table 67: authenticationFailure Trap Variables
Variable
Trap ID Description Trap Source Trap Severity Trap Category Additional Info
Description
4 An authentication process has failed BST/NPU/SU Warning Communication 142...143. See details in the following table.
Description
LCI (Monitor port) authentication failure. A BST/NPU trap. Telnet authentication failure. A BST/NPU or SU trap.
34
Active Alarms
Active Alarms
Active alarms can be viewed in the Alarms Log of NPU/BST, which includes all the alarms that are currently on. The alarms are displayed in the format: ID=<id>,name=<Name>,cat=<Category>,sev=<Severity>,src=<Source>, <Reason String> Example: ID=21, name=ShelfCardExtractionOn, cat=EQUP, sev=Info, src=PIU#1, PIU CARD EXTR
6.1
DiagnosticsHwFaultOn Alarm
Table 69: DiagnosticsHwFaultOn Alarm Variables
Variable
ID Description Trap Source Trap Severity Trap Category Reason String
Description
2 The device/card has detected a hardware fault BST/NPU Major Equipment BIT Failed
35
Active Alarms
6.2
MonitorAccessOn Alarm
Table 70: MonitorAccessOn Alarm Variables
Variable
ID Description Trap Source Trap Severity Trap Category Reason String
Description
4 The device is accessed via LCI (Monitor port) or Telnet BST/NPU Info Equipment NPU/BST LCI ACCESS: LCI (Monitor port) access has been detected. NPU/BST TELNET ACCESS: Telnet access has been detected.
36
Active Alarms
6.3
ShelfCardExtractionOn Alarm
Table 71: ShelfCardExtractionOn Alarm Variables
Variable
ID Description Trap Source Trap Severity Trap Category Reason String
Description
21 The card is being extracted from the chassis NPU/AU Info Equipment AU CARD EXTR NPU CARD EXTR PIU CARD EXTR PSU CARD EXTR AVU CARD EXTR
6.4
ShelfPeripheralEquipmentFaultOn Alarm
Table 72: ShelfPeripheralEquipmentFaultOn Alarm Variables
Variable
ID Description Trap Source Trap Severity Trap Category Reason String
Description
23 A fault has been detected in a peripheral unit or a BST components BST/PIU/PSU/AVU Minor Equipment BST PER FAULT
37
Active Alarms
6.5
ShelfEnvParamFaultOn Alarm
Table 73: ShelfEnvParamFaultOn Alarm Variables
Variable
ID Description Trap Source Trap Severity Trap Category Reason String
Description
25 A fault has been detected in a chassis environmental parameter BST/NPU Info Equipment BST ENV FAULT
6.6
OduCommErrorOn Alarm
Table 74: OduCommErrorOn Alarm Variables
Variable
ID Description
Description
63 An error has been detected in the communication with the ODU associated with the specified Channel ID. BST/AU Minor Communication ODU COMMUNICATION ERROR
38
Active Alarms
6.7
OduBandMissmatchOn Alarm
Table 75: OduBandMissmatchOn Alarm Variables
Variable
ID Description
Description
65 A mismatch was detected between the Configured Frequency Band and actual band supported by the HW of the ODU associated with the specified Channel ID. BST/AU Major Communication AU ODU BAND MISMATCH
6.8
SwDownloadStart Alarm
Table 76: SwDownloadStart Alarm Variables
Variable
ID Description Trap Source Trap Severity Trap Category Reason String
Description
101 SW download process has started BST/NPU/AU Info PROC SW DNL START
39
Active Alarms
6.9
SwDownloadError Alarm
Table 77: SwDownloadError Alarm Variables
Variable
ID Description Trap Source Trap Severity Trap Category Reason String
Description
103 An error has been detected in the SW download process BST/NPU/AU Minor PROC SW DNL FAIL
6.10
SwSwitchFailed Alarm
Table 78: SwSwitchFailed Alarm Variables
Variable
ID Description Trap Source Trap Severity Trap Category Reason String
Description
104 Software switch-over failed BST/NPU/AU Minor PROC SW SWITCH
6.11
LinkDown Alarm
Table 79: LinkDown Alarm Variables
Variable
ID Description Trap Source Trap Severity Trap Category
Description
130 A communication link failure BST/NPU/AU Info Communication
40
Active Alarms
Description
NPU/BST ETH CONN: The Ethernet connection to the backbone has been found to be down. A BST/NPU alarm. NPU/BST MNG CONN: The Management connection has been found to be down. A BST/NPU alarm. NPU AU CONN: The communication to an AU has failed. An AU alarm. AU RLNK LOSS: Radio link has failed completely (loss of communication to all SUs). A BST/AU alarm.
6.12
AuthenticationFailure Alarm
Table 80: AuthenticationFailure Alarm Variables
Variable
ID Description Trap Source Trap Severity Trap Category Reason String
Description
132 An access authentication process has failed BST/NPU Warning Communication NPU LCI UNAUTH ACC: LCI (Monitor port) authentication failure. NPU TELNET UNAUTH ACC: Telnet authentication failure.
NOTE
Authentication Alarms remain on until expiration of the timeout.
41