Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
ASTM D 5
See other applications under ASTM D 217 - D 937 - D 1321 - D 1403 SCOPE This test method covers the determination of the penetration of semi-solid and solid bitumous materials. OTHER STANDARDS IP 49 - NFT 66004 - ISO 3997 - DIN 52010
REF. 941734
This compact automated instrument uses the latest electronic technologies. It is equipped with keyboard, LCD display, user friendly software and stepper motor for penetration depth as low as 0.01 mm, needle (or cone) holder, magnifying lens and low voltage illuminator, centering guide, RS232C output and accessories for automatic level detection for conductive samples.
REF. 9417582
This compact twin-unit automated grease worker uses electronic counter to control the strokes number. ACCESSORIES (for all standards)
27674 941220 941732 9911504 9911532 9911533 Glass transf er bath (cryostat connection) Constant temperature w ater bath (max 100C) Calibration kit f or automatic penetrometer A STM thermometer 17C A STM thermometer 63C A STM thermometer 64C
Standard needle 2.5 g (up to 350 u.) Holder 47.5 g Outf it f or penetration of bitumous material A dditional w eight 100 g A dditional w eight 50 g Long needle 2.5 g (up to 500 u.) Sample container one use 55x35 mm (pack of 10)
S ample c ontainer A l. 55x 35 mm (pac k of 10)
picture not mandatory
Sample container A l. 55x70 mm (>200 u.) Sample container A l. 55x57 mm (up to 500 u.) Bitumen automatic level detection device
outfit is
outfit is
See overleaf
outfit is
outfit is
9417341
9417342 9417343
997421 - GREASE WORKER FOR CONE 997431 - GREASE WORKER FOR CONE
ASTM D 6
SCOPE This test method covers the determination of the loss in mass (exclusive of water) of oil and asphaltic compounds when heated. OTHER STANDARDS IP 45 - NFT 66011
REF. 941875
Strictly conform to ASTM requirements because of exclusive thermocouple sensor installed on the rotating shelf with the control thermometer, this is a double wall illuminated oven with glass window, 9 place revolving shelf, 9 aluminium containers, thermometer and instruction manual. ACCESSORY
9418172 Sample container brass nickel plated
ASTM D 36
SCOPE This test method covers the determination of the softening point of bitumen in the range from 30 to 157C using the ring and ball apparatus immersed in distilled water (30 to 80C), glycerin (80 to 157C), or ethylene glycol (30 to 110C). OTHER STANDARDS
REF. 9418324
Ring and ball apparatus four-test unit with shouldered rings and 15C thermometer
REF. 9418334
Ring and ball apparatus four-test unit with straight rings and 15C thermometer ACCESSORIES (for all ref.)
941612 941723 9418451 9418452 Hot plate (600 W) Electric stirrer Ball centering guide f or tapered or straight ring Ball centering guide f or shouldered ring
picture not mandatory
REF. 40100
The NBA 440 model, fully automatic tester, is equipped with ticket printer, Pt 100 probe and all equipment to perform test with shouldered rings. SPARE PARTS (2 years basis)
17487 20764 20765 25666 40103 40138 40139 40154 40390 9920766 Calibrated beaker Straight rings (pack of 10) Shouldered rings (pack of 10) Conical rings (pack of 10) Detection lamp Ring and ball craddle Pt 100 probe f or NBA 430/440 heating element (1000 W) Printer paper Seyko DPU 414 (roll) Balls (pack of 10)
ASTM D 56
SCOPE This test method covers the determination of the flash point, by tag manual and automated closed testers, of liquids with a viscosity below 9.5 cst at 25C and a flash point below 93C.
REF. 40600
The NTA 440 model, fully automatic tester, is equipped with ticket printer, cup and cover, cup support, Pt 100 probe, detection cable and gas tubing. OPTIONAL ACCESSORY
9923203 9923204 Cryostat TLC 30 - 5 liters (-30/+60C .1) Cryostat TLC 40 - 11 liters (-45/+20C .05)
40390
40602 40603 40605 40610 40612
ASTM D 70
SCOPE This test method covers the determination of the specific gravity and density of semi-solid bitumous materials, asphalts cements, and soft tar pitches by use of a pycnometer. OTHER STANDARDS NFT 66007
REF. 9924615
Thermostatic bath NECESSARY ACCESSORIES
9911532 A STM thermometer 63C
PYCNOMETER
OPTIONAL ACCESSORIES
20847 23229 23230 24624 Pycnometer Pycnometer Pycnometer Pycnometer A ( 24/30 ml) C ( 24/30 ml) D ( 24/30 ml) B ( 24/30 ml)
picture not mandatory
ASTM D 86
See other applications under ASTM D 850 - D 1078 SCOPE This test method covers the distillation of natural gasolines, motor gasiolines, aviation gasolines, aviation turbine fuels, special boiling point spirits, naphtas, white spirit, kerosines, gas oils, distillate fuel oils, and similar petroleum products, utilizing either manual or automated equipment. OTHER STANDARDS IP 123 - NFM 07002 - ISO 3405 - DIN 51751
REF. 941227
Front View distillation apparatus, single unit (receiver on left), with electric heater and temperature control by variotronic, complete with 2 thermometers and Ceran board 38 mm.
100 ml graduated receiver (D86) Ceran board hole 50 mm 125 ml distillation f lask (D86) Silicone stopper f or condenser (pack of 50) Silicone stopper thermometer (pack of 50)
Karanape board (38 mm)
Karanape board (32 mm) Heating element (1000W) A STM thermometer 7C A STM thermometer 8C
See overleaf
REF.40000
Model NDI 440, automatic stand alone unit operable through PC keyboard and standard 14 colour screen or alternatively connectable to external existing Pentium PC with Windows software. Basic unit with distillation flasks and CERAN boards as per mentioned methods, 100 ml receiver, 5 ml residue receiver, sensor adjuster, Pt 100 sensor, automatic dry point kit and more. MAIN CONSUMABLES
19096 19420 19422 24019 26111 40052 40065 40067 40073 40078 40079 Seepage f ingers (pack of 10) 100 ml distillation f lask (D86) 200 ml distillation f lask (D850) 125 ml distillation f lask (D86) 100 ml graduated receiver glass f oot (D86) 125 ml black bottom f lask Tef lon centering stopper f or Pt 100 probe Tef lon centering stopper f or dry point Dry point thermocouple Karanape board (38 mm) Karanape board (32 mm)
ASTM D 88
Saybolt Viscosity
See other application under ASTM D 244 SCOPE This test method covers the empirical procedures for determining the Saybolt Universal or Saybolt Furol Viscosities of petroleum products at specified temperatures between 21 and 99C.
QUOTATION ON REQUEST
ASTM D 91
See other applications under ASTM D 96 - D 893 - D 1796 - D 2273 D 2709 - D 2711 - D 4007 SCOPE This test method covers the determination of the precipitation number of steam cylinder stocks and black oils, and can be used for other lubricating oils.
REF. 9412911
This model without cooling/heating control is for ASTM D 91, D 893, D 2273, D 2709 and D 2711. The model includes rotor, bucket and adapters for 6 conical tubes 8 and 8 traces.
REF. 9412920
This model with heating control up to 60C for all standards (D96 to D4007). The model includes rotor, bucket and adapters for 6 conical tubes 8 and 8 traces. ACCESSORIES (various) 941220
941297 941298 9413120
ASTM D 92
SCOPE This test method describes the determination of the flash point of petroleum products by a manual or automated cleveland open cup apparatus. OTHER STANDARDS IP 36 - NF EN 22592 - ISO 2592
ON REQUEST
The semi-automatic tester NCL 210 is equipped with electronic regulator, Pt 100 and cup. The temperature slope is automatically controlled.
ASTM D 93
SCOPE This test method covers the determination of the flash point of petroleum products in the temperature range from 40 to 360C by manual or automated Pensky-Martens closed cup apparatus. OTHER STANDARDS IP 34 - NF M07019 - ISO 2719 - DIN 51758
REF. 941617
The model NPM 110/B, manual instrument, is delivered complete with cup and cover, thermometer and stirrer. This model follows method B. SPARE PARTS (2 years basis)
941620 997444 Heating element 230V Gloves (pair)
9411930
9411931 9900903 9901003
REF. 941619
The model NPM 210/B, semi-automatic instrument, is delivered complete with cup and cover, Pt100 probe and stirrer. The temperature slope is automatically controlled. This model follows method B. SPARE PARTS (2 years basis)
941621 Heating cartridge 230V
997444
9411930 9411931 9417908
Gloves (pair)
Cup f or NPM 110 and 210 Cover f or NPM 110 and 210 Pt 100 probe (70x3 mm)
Cup f or NPM 440 Cover w ithout probe f or NPM 440 Stirring connection cable Detection cable Pt 100 f or NPM 440 Electric ignitor
Printer paper Sey ko DPU 414 (roll)
10
ASTM D 95
SCOPE This test method covers the determination of water in petroleum products, tars, and other bitumous materials by the distillation method. OTHER STANDARDS IP 74 - NFT 60113 - ISO 3733
REF. 21454
This model complete delivered with electric heater. SPARE PARTS (2 years basis)
12852 13142 14571 16252 16324 16329 19357 21003 21455 21456 Round bottom f lask CN24/29 (500 ml) Liebig condenser CN24/29 (400 mm) Heating mantle 500 ml Clamp Stand w ith rod 12 x 800 mm Universal bosshead f or assembly Dean Stark trap (10ml in 0.1) Pulse regulator (2200 W) 5 ml : 1/10 Dean Stark w ith round bottom 25 ml : 1/5 Dean Stark w ith conical bottom
ASTM D 96
See instrument under ASTM D 91
SCOPE This test method covers the centrifuge method for determining sediment and water in crude oil during field custody transfers.
11
ASTM D 97
See other application under ASTM D 2500 SCOPE This test method is intended for use on any petroleum product. OTHER STANDARDS IP 15 - NFT 60105 - ISO 3016
REF. 941584
Model with single temperature bath with 5 wells, stirrer and 6 thermometers 5C. Cooled by dry ice. ACCESSORY
99597 Dry ice machine
REF. 941592
Cloud and pour test cabinet, mechanically refrigerated by CFC free gases, 4 compartments (0, -17, -34, -51 C), each with 4 sleeves including test tubes, felts, 15 thermometers 5C and 5 thermometers 6C. REFERENCE FLUID (see page 74)
REF. 51032
The NTE 452 allows automated determination of cloud and/or pour point. This double-unit analyser is equipped with sample holder automate, detectors and optical fibers and an integrated cooling unit (+30 to - 70 C). Monitoring is achieved by Windows (c) friendly software.
REF. 51031
Same as 51032 but single place. ALTERNATIVES
51011 51012 51021
51022
21147
51116
12
ASTM D 113
SCOPE The ductility of a bituminous material is measured by the distance to which it will elongate before breaking when two ends of a briquet specimen of the material are pulled apart at a specified speed and temperature. OTHER STANDARDS NFT 66006 - DIN 52013
REF. 9418641
Ductility machine new design with electronic regulation and digital display measurement, for three simultaneous tests at variable speeds of 1 to 99 mm/min by step of .1 mm, maximum pull length : 100 cm
REF. 9418642
Ductility machine new design with electronic regulation and digital display measurement, for three simultaneous tests at variable speeds of 1 to 99 mm/min by step of .1 mm, maximum pull length : 150 cm ACCESSORY
9923203 Cry os tat TLC 30 - 5 liters (-30/+60C .1)
V A Hz Kg mm mm mm
picture not mandatory
ASTM D 129
See other application under ASTM D 240 - D 808 SCOPE This test method covers the determination of sulfur in petroleum products, including lubricating oils containing additives, additive concentrates, and lubricating greases that cannot be burned completely in a wick lamp. OTHER STANDARDS IP 61 - NFT 60109 - DIN 51577 QUOTATION ON REQUEST
13
ASTM D 130
SCOPE This test method covers the detection of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, natural gasoline or other hydrocarbons having a Reid vapor pressure no greater than 18 psi. OTHER STANDARDS IP 154 - NFM 07015 - ISO 2160 - DIN 51811
REF. 941220
constant temperature test bath with plain cover and drain cock, controlled by electronic thermostat, Pt 100 sensor and led heating control (max 100C). NECESSARY ACCESSORIES FOR ASTM D 130
12780 99486 99493 941485 941491 941492 994871 9413109 9413125 9911499 9922505 Test tube 25x150mm Multistrip polishing vise Copper strip corrosion test standard Copper strip (pack of 24) Flat glass test tube Test cylinder Silicon carbide paper 240 grits (pack of 10) Support to hold 9 stainless steel vessel Support to hold 25 test tubes A STM thermometer 12C Silicon carbide pow der 150 mesh (1 kg)
941492
9412209 9414920 9417900 9922505
Test cylinder
Heating element (1500 W) O'ring seals (pack of 10) Pt 100 probe (30x6 mm) Silicon carbide pow der 150 mesh (1 kg)
14
ASTM D 156
SCOPE This test method covers the determination of the color of refined oils such as undyed motor and aviation gasoline, jet propulsion fuels, naphtas and kerozine, and, in addition, petroleum waxes and pharmaceutical white oils. OTHER STANDARDS NFM 07003 - DIN 51411
REF. 941520
Complete improved model with the daylight source built-in the base and a 3-position turret assembly (, 1 and 2) with certified Saybolt filters reducing the time required to make a determination and eliminating the handling of the standard filters and the possibility of loss and damage. OPTIONAL ACCESSORIES
941523 9925975 Wax tube w ith heater (pow er supply not included) Pow er supply for w ax tube 230V / 12V
AUTOMATIC APPARATUS
REF. 9929006
ON REQUEST
The Lovibond PFX 880/P is an easy to use, automatic instrument, which eliminates time-consuming procedures of visual methods. It is a spectrophotometer for objective colour analysis of petroleum fuels, oils, waxes and petrochemicals according to the Saybolt and ASTM Colour scales
ASTM D 189
See other application under ASTM D 4530 SCOPE This test method covers the determination of the amount of carbon residue left after evaporation and pyrolisis of an oil. It is intended to provide some indication of relative coke-forming propensities. The method is generally applicable to relatively non volatile petroleum products which partially decompose on distillation at atmospheric pressure. OTHER STANDARDS NFT 60116 - IP 13 - ISO 6615 - DIN 51551
REF. 941653
This model, single unit complete except gas burner is intended to be used manually. It includes porcelain crucible, skidmore crucible with cover, steel outer crucible with lid, support triangle, holder, chimney stand. ACCESSORY
9927083 Meker gas burner (butane/propane)
15
ASTM D 217
See instruments under ASTM D 5
SCOPE This test method covers four procedures for measuring the consistency of lubricating greases by the penetration of a cone of specified dimension, mass, and finish. The penetration is measured in 1/10 of a millimeter. OTHER STANDARDS IP 50 - NFT 60132 - ISO 2137 - DIN 51580
ASTM D 240
See instrument under ASTM D 129
SCOPE This test method covers the determination of the heat of combustion of liquid hydrocarbon fuels ranging in volatillty from that of light distillates to that of residual fuels.
ASTM D 244
See instrument under ASTM D 88
SCOPE These test methods and practices, given under the headings titled Composition, Consistency, Stability, and Examination of residue, cover the examination of asphalt emulsions composed principally of a semisolid or liquid asphaltic base, water and an emulsifying agent.
16
ASTM D 287
See other applications under ASTM D 941 - D 1217 - D 1298 - D1480 SCOPE This test method covers the determination by means of a glass hydrometer of the API gravity of crude petroleum and petroleum products normally handled as liquids and having a Reid vapor pressure no greater than 26 psi. OTHER STANDARDS ISO 3675
REF. 14854
6-unit ramp in stainless steel ACCESSORIES (for all standards)
10013 10741 9915287 9915288 9920800 9920801 9920802 9920803 9920804 9920805 9920806 9920807 9920808 9920809 Spare glassw are w ith cock Density cylinder 500 ml A FNOR thermometer, -15 to +45C A FNOR thermometer, +35 to +85C Hydrometer Hydrometer Hydrometer Hydrometer Hydrometer Hydrometer Hydrometer Hydrometer Hydrometer Hydrometer A PI 1H / -1 to 11 A PI 2H / 9 to 21 A PI 3H / 19 to 31 A PI 4H / 29 to 41 A PI 5H / 39 to 51 A PI 6H / 49 to 61 A PI 7H / 59 to 71 A PI 8H / 69 to 81 A PI 9H / 79 to 91 A PI 10H / 89 to 101
ON REQUEST
17
ASTM D 322
SCOPE This test method covers the determination of the amount of dilution in crankcase oils of engines when gasoline has been used has the fuel. OTHER STANDARDS IP 23 - DIN 51565
REF. 9916683
Complete tester with electric heating SPARE PARTS (2 years basis)
12852 13142 14572 16252 16324 16329 17966 21003 Round bottom f lask CN24/29 (500 ml) Liebig condenser CN24/29 (400 mm) Heating mantle w ith f eeder cable Clamp Stand w ith rod 12 x 800 mm Universal bosshead f or assembly Trap CN24/29 (5 ml) Pulse regulator (2200 W)
18
ASTM D 323
SCOPE This test method covers procedures for the determination of vapor pressure of gasoline, volatile crude oil, and other volatile petroleum products. OTHER STANDARDS IP 69 - NFM 07007 - ISO 3007 - EN 12
REF. 941432
Electronic constant thermostatic bath, 3 vessels capacity, with thermometer and digital display. Equipped with adjustable stirring device, low water cut-off, cooling coil for external cryostat and drain cock. REID VESSELS WITH SCREW COUPLING
941401 941405 RV P screw coupling test vessel (below 26 lb) RV P screw coupling test vessel (above 26 lb)
OPTIONAL ACCESSORIES
Saf ety burst disk capsule (add on vessel price) Mercury manometer Connection f or mercury manometer
19
ASTM D 381
REF. 941302
This model, air jet only with 5 wells, includes electronic temperature control and flowmeter, thermometer 3C, beakers, conical outlets.
REF. 941303
This model, air and steam jet with 5 wells, includes electronic temperature control and flowmeter, steam superheater, thermometer 3C, beakers, conical outlets. ACCESSORIES
12875 941301 941304 941307 941308 9413080 Filter f unnel 125 ml A ir calibration kit f or 941302/941303 V apour calibration kit f or 941303 Overpressure pump f or steam generator Steam generator (400V - 3 ph) A ir compressor 2 stages 300 l (400V - 3 ph)
V A Hz Kg mm mm mm
picture not mandatory
20
ASTM D 445
SCOPE This test method specifies a procedure for the determination of the kinematic viscosity of liquid petroleum products, both transparent and opaque, by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer. OTHER STANDARDS IP 71 - ISO 3104 - DIN 51366
REF. 941121
Constant temperature viscosity bath ROUTINE (max. 100C) with glass jar of 20 liters, digital temperature display and 5 places for common viscometers (support not included).
REF. 941122
Constant temperature viscosity bath ROUTINE (max. 100C) with glass jar of 30 liters, digital temperature display and 5 places for common viscometers (support not included).
REF. 941131
Constant temperature viscosity bath PRECISION (max. 120C) with glass jar of 30 liters, electronic digital temperature control and 8 places for common viscometers (support not included). NECESSARY ACCESSORIES
9411310 9411313 Suspension cover f or Ubbelohde (screw ) Suspension cover f or Cannon-Fenske (screw )
9417904
9916419 9916427 9921375
REF.18450
VISCOMETER WASHER apparatus supplied with 6 nozzle stoppers. This apparatus allows for external and internal washing of all current types of viscometer tubes. The viscometer tubes are suspended in BIOSANE T215 solvent vapors at 80C. - Very fast cleaning for 6 viscometer tubes in 5 to 15 min - Negligible solvent consumption SPARE PARTS (2 years basis)
18453 18454 18455 Heating element Injector stopper Glass cleaning bath
21694
9925699
Heating controller
RECOMMENDED SOLVENT
Biosane T215 solvent (5 l)
See overleaf
21
VISCOMETER TUBES (all with calibration certificate) 1. Ubbelohde viscometer for transparent liquids
14030 14031 14032 14034 14035 14036 14037 14038 14039 14041 14042 14043 14044 14045 13993 13994 0,3 to 1 cSt - size 0 0,6 to 3 cSt - size 0C 1 to 5 cSt - size 0B 2 to 10 cSt - size 1 6 to 30 cSt - size 1C 10 to 50 cSt - size 1B 20 to 100 cSt - size 2 60 to 300 cSt - size 2C 100 to 500 cSt - size 2B 200 to 1000 cSt - size 3 600 to 3000 cSt - size 3C 1000 to 5000 cSt - size 3B 2000 to 10000 cSt - size 4 6000 to 30000 cSt - size 4C 10000 to 50000 cSt - size 4B 20000 to100000 cSt - size 5
1. Ubbelohde
2. Cannon-fenske
3. Cannon-fenske
4. BS / IP U RF
See overleaf
22
VISCOMETER TUBES (all with calibration certificate) 5. Houillon viscometer for transparent liquids
13932 13933 13934 13935 13936 13937 13938 13939 13940 3.2 cSt 6.4 cSt 12 cSt 28 cSt 80 cSt 200 cSt 400 cSt 960 cSt 2000 cSt
5. Houillon
6. BS / IP SL
7. S.I.L.
8. BAUME VIGNERON
ALL ABOVE VISCOMETERS CAN BE SUPPLIED WITHOUT CERTIFICATE ON SPECIAL REQUEST See overleaf
23
VISCOMETER TUBES FOR AUTOMATIC VISCOMETER 10. CANNON UBBELOHDE viscometer for transparent liquids without connection to washer
15253 15255 15256 15257 15259 15260 15263 15264 15266 0.003 (approx. constant) 0.005 (approx. constant) 0.01 (approx. constant) 0.03 (approx. constant) 0.1 (approx. constant) 0.3 (approx. constant) 1 (approx. constant) 3 (approx. constant) 10 (approx. constant)
11. CANNON UBBELOHDE viscometer for transparent liquids with connection to washer
22882 22883 22884 22885 22886 22887 22888 22889 22890 0.005 (approx. constant) 0.003 (approx. constant) 0.01 (approx. constant) 0.03 (approx. constant) 0.1 (approx. constant) 0.3 (approx. constant) 1 (approx. constant) 3 (approx. constant) 10 (approx. constant)
24
ASTM D 473
SCOPE This test method covers the determination of sediment in crude oils and fuels oils by extraction with toluene. OTHER STANDARDS IP 53 - NFM 07010 - ISO 3735 - DIN 51789
REF. 941281
Extraction apparatus consisting of erlenmeyer extraction flask, 1000ml capacity, block-tin coil condenser, water cup and extraction thimble suspended by means of a corrosion resistant wire. ACCESSORY
941612 Hot plate (600 W)
99284
941282 941614 9412813 9412831
Extraction basket
Condenser heating element (600 W) Water cup w ith glass hook Extraction f lask (1 litre)
picture not mandatory
25
ASTM D 482
See other applications under ASTM D 874 - D 4530 SCOPE This test method covers the determination of ash in the range 0.001-0.180 mass %, from distillate and residual fuels, gas turbine fuels, crude oils, lubricating oils, waxes, and other petroleum products, in which any ash-forming materials present are normally considered to be undesirable impurities or contaminants. OTHER STANDARDS IP 4
REF. 23963
Muffle furnace model L3/11 with a capacity of 3 liters and max. temperature of 1100 C. NECESSARY ACCESSORIES (for D482)
10532 10687 10702 10770 10771 991307 Porcelain dish,100 ml,f lat bottom (pack of 6 ) Stainless curved crucible tong (pack of 2) Glass balls diam. 2mm (1 kg) Porcelain plate f or below dessicator Soda lime glass dessicator, button cover Platinum crucible (100 ml)
ASTM D 524
SCOPE This test method covers the determination of the amount of carbon residue left after evaporation and pyrolysis of an oil, and is intended to provide some indication of relative coke-forming propensity. OTHER STANDARDS IP 14 - NFT 60117 - ISO 4262
REF. 941671
This model with 5 wells and control bulb does not include test accessories. NECESSARY ACCESSORIES
99675 941673 941678 10 ml syringe w ith needie Filling device f or glass coking bulb Glass coking bulb
26
ASTM D 525
See other applications under ASTM D 873 SCOPE This test method covers the determination of the stability of gasoline in finished form only, under accelerated oxidation conditions. OTHER STANDARDS IP 40 - NFM 07012 - ISO 7536 - DIN 51780 AUTOMATIC EQUIPMENT MODEL NPI 420
REF. 40930
The oxygen filling and decompression valve adapter model NPC 210 is designed for all type of potential gums and indiuction period bombs. The kit provides the operator with a high level of safety. NECESSARY ACCESSORIES (for D525 and D873)
40903 40909 40911 40933 941354 941355 Stainless steel vessel w ith burst disk Filling and decompression (manual) Stand f or 2 vessels Gaskets viton f or cylinder (pack of 10) Glass test container Cover f or container
MANUAL EQUIPMENT
REF. 941372
4 place water bath NECESSARY ACCESSORIES
40903
40909
99362 99365 941354 941355 9911509 941373 9412209 9413621 9413622 9417902
Recording pressure gauge (2-pen) w ith tubings Charts f or recording gauge (pack of 100) Glass test container Cover f or container A STM thermometer 22C Glass condenser Heating element (1500 W) Red Pen f or recorder (pack of 5) Green Pen f or recorder (pack of 5) Pt 100 probe (60x5 mm)
27
ASTM D 566
SCOPE This test method covers the determination of the dropping point of lubricating grease. OTHER STANDARDS IP 132 - NFT 60102 - ISO 2176
QUOTATION ON REQUEST
ASTM D 611
Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon solvents
SCOPE This test method covers the determination of the aniline point of petroleum products and hydrocarbon solvents. OTHER STANDARDS IP 2 - NFM 07021 - ISO 2977 - DIN 51787
REF. 41100
Automatic Aniline Point Tester model NPA 410. Detection of clear to dark sample by infrared detection. NO HANDLING OF ANILINE. ACCESSORIES
41104 41105 41106 2 ml vials to crimp (pack of 1000) Crimp seal (pack of 500) Hand crimper
REF. 40500
Instrument model NAE 440 equipped with 2 independant station, heating system by metallic bath (+10/+150 C), automatic detection of clear, colored and dark samples. REFERENCE FLUID (see page 74)
28
ASTM D 613
Reference and Check Fuel Blending for Octane and Cetane Measurement
See other applications under ASTM D 2699 - D 2700 SCOPE NABLEND series of automatic blending units have been designed to automate the blending procedure for reference and check fuels used for octane and cetane number measurement. Due to the flexibility of the software the instrument can be used for other hydrocarbon blending purposes too where the accuracy and the speed of the blending procedure are critical. The units are operable locally from the embendded Windows CE based touch screen computer or can be remote controlled from any PC having an internet browser installed over the local area network. The intranet technology software allows complete remote management and service over the internet or phone line. The blending and calibration data being stored in an internal database, can be accessed over the local area network.
REF. 52000
Model NABLEND 8875 automatic stand alone unit with 2 fluid channels, for blending cetane reference fuels according ASTM D613 composed of two blending components: nCetane, AMN or HMN, or U and T components.
REF. 52100
Model NABLEND 8873 automatic stand alone unit with 3 fluid channels, for blending octane reference and check fuels according ASTM D2699 and ASTM D2700 composed of three blending components: iso-octane, normal heptane and toluene.
REF. 52200
Model NABLEND 8877 automatic stand alone unit with 5 fluid channels, for blending octane and cetane reference and check fuels according ASTM D613, ASTM D2699 and ASTM D2700 composed of three blending components: iso-octane, normal heptane and toluene for octane and two blending components: nCetane, AMN or HMN, or U and T components for cetane.
REF. 52300
Model NABLEND 8877 automatic stand alone unit with 6 fluid channels, for blending octane and cetane reference and check fuels according ASTM D613, ASTM D2699 and ASTM D2700 composed of four blending components: iso-octane, normal heptane, 80/20 blend and toluene for octane and two blending components: nCetane, AMN or HMN, or U and T components for cetane. OPTIONAL ACCESSORY
53000 52001 explosion-proof drum pump Bottle, solvent resistant w ith cock (1l)
MAIN CONSUMABLES
V A Hz Kg mm mm mm
picture not mandatory
29
ASTM D 664
SCOPE This test method covers procedures for the determination of acidic constituents in petroleum products and lubricants soluble or nearly soluble in mixture of toluene and propan-2-ol. OTHER STANDARDS IP 177 - ISO 6619
REF. 941708
neutralisation number apparatus by potentiometric titration, single unit, complete with pH test kit. SPARE PARTS (2 years basis)
941709 9417082 9417083 9417085 9417086 PH test kit Glass electrode (Beck. 39321) Calomel electrode (Beck. 39420) Burette (10ml in 0,05 ml) 250 ml beaker
30
ASTM D 665
SCOPE This test method is used to evaluate the ability of inhibited mineral oils, particularly steam-turbine oils, to aid in preventing the rusting of ferrous parts should water become mixed with the oil. This test method is also used for testing other oils, such as hydraulic oils and circulating oils. OTHER STANDARDS IP 135 - NFT 60151 - ISO 7120 - DIN 51585
REF. 9416306
this improved 6 places unit with digital tachometer includes beakers, covers, stainless steel stirrers, test rods with plastic holders and 9C thermometers. Polishing machine is not included. ACCESSORIES
941636 Polishing apparatus w ith electric motor
ASTM D 721
See other application under ASTM D 3235 SCOPE This test method covers the determination of oil in petroleum waxes having a congealing point of 30C or higher as determined in accordance with test method D 938, and containing not more than 15% of oil. OTHER STANDARDS IP 158 - NFT 60120 - ISO 2908 - DIN 51571
REF. 941795
Complete apparatus with cooling bath, 3 filter stick, air pressure regulator and evaporation assembly, with 4 weighing bottles and thermometer. SPARE PARTS (2 years basis)
23240 941797 9417902 9417971 9907203 Weighing bottle (15 ml) Filter stick B24 Pt 100 probe (60x5 mm) Cooling sample tube IP thermometer 72C
ASTM D 808
See instrument under ASTM D 129
SCOPE This test method covers the determination of chlorine in lubricating oils and greases containing additives, and in additive concentrates.
31
ASTM D 850
See instrument under ASTM D 86
SCOPE This test method covers the distillation of industrial aromatic hydrocarbons
ASTM D 873
See instruments under ASTM D 525
SCOPE This test method covers the determination of the tendency of aviation reciprocating, turbine, and jet engine fuels to form gum and deposits under accelerated aging conditions. OTHER STANDARDS IP 138 - NFM 07013 - DIN 51799
ASTM D 874
See instrument under ASTM D 128
SCOPE This test method covers the determination of the sulfated ash from unused lubricating oils containing additives and from additives concentrates used in compounding. OTHER STANDARDS IP 163 - NFT 60143 - ISO 3987 - DIN 51575
ASTM D 877
SCOPE This test method covers a referee and a routine procedure for determining the dielectric breakdown voltage of insulating liquids. OTHER STANDARDS IP 295 - NFC 27221
REF. 9923797
Complete Tester model OTS60AF/2 for Dielectric Breakdown Voltage, delivered with oil test vessel fitted with spherical electrodes and oil test set preparation kit comprising stirrers, mushroom and cylindrical electrodes, electrode spacing gauge and protective cover.
12 V rechargeable
REF. 9927196
Portable tester model OTS60PB for routine analysis, delivered with 4 oil vessels, 1 pair of spherical, mushroom and cylindrical electrodes, spacing gauge and protective carrying case. SPARE PARTS (2 years basis)
9923798 9923799 Test container + electrodes f or D877 Test container + electrodes f or NFC 27221
32
ASTM D 892
SCOPE This test method covers the determination of the foaming characteristics of lubricating oils at 24C and 93.5C. OTHER STANDARDS IP 146 - NFT 60129 - ISO 6247 230 V 16 A 50 Hz 36 Kg w 680 mm d 340 mm h 770 mm
picture not mandatory
REF. 941643
Twin test units for both 24 and 93.5 C. Complete with certified diffuser stone.
REF. 941640
single test unit for both 24 and 93.5 C. Complete with certified diffuser stone.
ASTM D 893
See instrument under ASTM D 91
SCOPE This test method covers the determination of pentane et toluene insolubles in used lubricating oils. OTHER STANDARDS NFT 60157
33
ASTM D 937
See instruments under ASTM D 5
SCOPE This test method covers measuring with a penetrometer the penetration of petrolatum as an empirical measure of consistency. OTHER STANDARDS IP 179 - NFT 60119 - DIN 51579
ASTM D 941
See instrument under ASTM D 287
SCOPE This practice covers the laboratory determination, using a glass hydrometer, of the density, relative density, or API gravity of crude petroleum, petroleum products, or mixtures of petroleum and non petroleum products normally handled as liquids, and having a Reid vapor pressure of 26 lb or less. OTHER STANDARDS IP 160 - ISO 3675
ASTM D 942
SCOPE This test method determines resistance of lubricating greases to oxidation when stored statically in an oxygen atmosphere in a sealed system at an elevated temperature under conditions of test. OTHER STANDARDS IP 142
REF. 941769
Constant temperature oil bath, double walled,for two Norma-Hoffman Test vessels
REF. 941770
Constant temperature oil bath, double walled,for 4 Norma-Hoffman Test vessels NECESSARY ACCESSORIES
99766 99767 941370 941761 941762 941763 941764 941765 9417611 9911509 Pressure gauge (0-160 psi) Recording pressure gauge (2-pen) w ith tubings Flexible polyethylene tubing w ith quick coupling Complete oxidation vessel Holder f or 5 dishes Glass dish Spare burst disc A ccessory f or closing vessel Complete oxidation vessel w ith burst disc A STM thermometer 22C
34
ASTM D 943
See other application under ASTM D 2274 - D 2893 SCOPE This test method was developed for, and is used to evaluate the oxidation stability of inhibited steam-turbine oils in the presence of oxygen, water, and copper and iron metals at an elevated temperature. OTHER STANDARDS IP 157 - NFT 60150 - ISO 4263 - DIN 51587
REF. 9416240
Steam-Turbine Oils oxidation test apparatus, 8 units, with digital temperature display, opaque magnetic screen, one bath thermometer and one set of flowmeters (3 l/h air) included for ASTM D 943.
REF. 9416250
Middle distillate petroleum fuel oxidation test apparatus, 8 units, with digital temperature display, opaque magnetic screen, one bath thermometer and one set of flowmeters (3 l/h oxygen) included for ASTM D 2274.
REF. 9416260
Oxidation Test apparatus, 8 units, with digital temperature display, opaque magnetic screen, one bath thermometer. This apparatus is delivered whithout flowmeter. NECESSARY ACCESSORIES
9416241 9416242 Complete set of 8 glassw are A ccessories catalyst, syringe, mandrel,
OPTIONAL ACCESSORIES
516597 516596 941628 996232 9411302 Reel of copper w ire catalyst (20 kg) Reel of iron w ire catalyst (1 kg) Winding f ixture f or w ire catalyst Syringe w ith sampling tube Borosilicate glass jar(300 x 450 mm)
9416231
9416233 9416251 9416252 9416253
Thermometer bracket
Sampling tube holder Flow meter f or 3 l/h air (D943) Flow meter f or 3 l/h oxygen (D2274) Flow meter f or 10 l/h air (D2893)
35
ASTM D 972
SCOPE This test method covers the determination of the loss in mass by evaporation of lubricating greases and oils for applications where evaporation loss is a factor.
REF. 941771
Evaporation cell with grease sample cup, equipped with flowmeter and needle control valve.
REF. 941772
Evaporation cell with oil sample cup, equipped with flowmeter and needle control valve. SPARE PARTS (2 years basis)
9417741 9417742 9911509 9911536 Grease sample cup Oil sample cup A STM thermometer 22C A STM thermometer 67C
ASTM D 1078
See instrument under ASTM D 86
SCOPE This test method specifies a procedure for the laboratory distillation of organic liquids boiling between 30 and 300 C which are chemically stable during the distillation process. OTHER STANDARDS IP 195
36
ASTM D 1142
SCOPE This test method covers the determination of the water vapor content of gaseous fuels by measurement of the dew-point temperature and the calculation therefrom of the water vapor content.
REF. 941975
Complete Tester 3 to 15 psi
REF. 9419751
Complete Tester 0 to 350 psi SPARE PARTS (2 years basis)
941977 999781 999782 9911515 Stainless steel mirror Bourdon manometer 3 to 15 psi Bourdon manometer 0 to 350 psi A STM thermometer 33C
picture not mandatory
ASTM D 1160
SCOPE This test method covers the determination, at reduced pressures, of the range of boiling points for petroleum products that can be partially or completely vaporized at a maximum liquid temperature of 400C. OTHER STANDARDS ISO 6616
REF. 9411280
Half-automated instrument built on a dedicated frame including water circulator, vacuum pump, computerized regulation of temperature and pressure (1 to 50 mmHg), printing dump of distillation report according to standard and full glassware. OPTIONAL ACCESSORIES
99597 9411292 9411305 Dry ice machine Quartz f lask w ith thermow ell (500 ml) Distillation column f or quartz f lask
V A Hz Kg mm mm mm
picture not mandatory
Set of glassw are Heating block and mantle (1000 W) 500 ml glass f lask w ith thermow ell 200 ml cylinder f or vacuum distillation Distillation column and condenser Dual cold trap V acuum / Pt100 adapter (top of column) Distillation column "O" ring
Seal gas ket f or Pt100
991303
997444
9411303 9417906 9911495
Gloves (pair)
Light recovery cylinder (12 ml) Pt 100 probe GDR (170x2 mm) A STM thermometer 8C
37
ASTM D 1177
SCOPE This test method covers the determination of the freezing point of engine antifreeze products. OTHER STANDARDS NFT 78102
REF. 9411520
Freezing point apparatus of engine antifreeze solutions complete with thermometers. SPARE PARTS (2 years basis)
23239 9411522 9915351 9915352 Dew ar f reezing tube (200 ml) Dew ar cooling bath A STM thermometer 75F A STM thermometer 76F
ASTM D 1217
See instrument under ASTM D 287
SCOPE This test method covers the measurement of the density of pure hydrocarbons or petroleum distillates boiling between 90 and 110C that can be handled in a normal fashion as a liquid at the specified test temperatures of 20 and 25C.
ASTM D 1263
SCOPE This test method covers the evaluation of the leakage tendencies of wheel bearing greases when tested under prescribed laboratory conditions.
QUOTATION ON REQUEST
38
ASTM D 1264
SCOPE This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 and 79C under the prescribed laboratory conditions.
QUOTATION ON REQUEST
ASTM D 1265
SCOPE This practice covers the procedures for obtaining representative samples of liquefied petroleum gases such as propane, butane, or mixture thereof, in containers other than those used in laboratory testing apparatus. OTHER STANDARDS NFM 41101 - ISO 4257 - DIN 51610
REF. 994541
Whitey stainless steel sampling vessel (1gallon) complete assembly.
SAMPLING OF LPG
REF. 992251
Whitey stainless steel sampling vessel (2250cc) complete assembly.
REF. 991001
Whitey stainless steel sampling vessel (1000cc) complete assembly.
REF. 99501
Whitey stainless steel sampling vessel (500 cc) complete assembly. SPARE PARTS
994546 992250 991000 99500 99031 99034 99046 99068 99400 99440 99464 991613 991819 992213 Stainless steel sampling vessel (1gallon) Stainless steel sampling vessel (2250 cc) Stainless steel sampling vessel (1000 cc) Stainless steel sampling vessel (500 cc) V alve D w ith tube 031 f or ref . 991000 V alve D w ith tube 034 f or ref . 99500 V alve D w ith tube 046 f or ref . 992250 V alve D w ith tube 068 f or ref . 994546 Quick coupling (QQ-QF4-B-400) 1m f lexible tubing (SS-TH4TA 4PF4-40) Inlet valve C f or vessel (SS-16DKM4-F4) Quick coupling male (SS-QF4-S-4PM) Connection M/F TE (SS-4-ST) V alve (SS-1 V M4)
picture not mandatory
39
ASTM D 1266
See other applications under ASTM D 2784 (Wickbold) SCOPE This test method covers the determination of total sulfur in liquid petroleum products in concentrations from 0.01 to 0.4 mass %. OTHER STANDARDS IP 107 - NFM07031- ISO 2192 - DIN 51771
QUOTATION ON REQUEST
40
ASTM D 1267
SCOPE This test method covers the determination of the gage vapor pressures of liquefied petroleum gas products at temperatures of 37.8C up to 70C. OTHER STANDARDS IP 161 - NFM 41010 - ISO 4256 - DIN 51616
REF. 941432
Electronic constant thermostatic bath, 3 vessels capacity, with thermometer and digital display. Equipped with adjustable stirring device, low water cut-off, cooling coil for external cryostat and drain cock. LPG TEST VESSEL (for D1267)
941921 LPG test vessel
OPTIONAL ACCESSORY
99920 Saf ety burst disk capsule (add on vessel price)
ASTM D 1298
See instrument under ASTM D 287
SCOPE This practice covers the laboratory determination, using a glass hydrometer, of the density, relative density, or API gravity of crude petroleum, petroleum products, or mixtures of petroleum and nonpetroleum products normally handled as liquids, and having a Reid vapor pressure of 26 lb or less. OTHER STANDARDS IP 160 - NFT 60101 - ISO 3675 - DIN 51757
41
ASTM D 1319
SCOPE This test method is for determining hydrocarbon types over the concentration ranges from 5 to 99 volume % aromatics, 0.3 to 55 volume % olefins, and 1 to 95 volume % saturates in petroleum fractions that distill below 315C. OTHER STANDARDS IP 156 - NFM 07024 - ISO 3837 - DIN 51791
REF. 941505
New designed Adsorption apparatus assembly, twin test, with standard column.
REF. 9415050
New designed Adsorption apparatus assembly, twin test, with true bore column. NECESSARY ACCESSORIES
995065 995067 995069 9415068 Silica gel 100 to 200 mesh (per 500 g) Certif ied silica gel w ith colored indicator (40 gr) Hypodermic syringe 1ml + Needle (10 cm) Hypodermic cleaning tube (2 m)
V A Hz Kg mm mm mm
picture not mandatory
ASTM D 1321
See instruments under ASTM D 5
SCOPE This test method covers the empirical estimation of the consistency of waxes derived from petroleum by measurement of the extent of penetration of a standard needle. OTHER STANDARDS NFT 60123 - ISO 3992 - DIN 51579
42
ASTM D 1322
SCOPE This test method covers a procedure for determination of the smoke point of kerosine and aviation turbine fuel. OTHER STANDARDS IP 57 - NFM 07028 - ISO 3014 - DIN 51406
REF. 941680
Smoke point apparatus, complete, delivered with one interchangeable oil container SPARE PARTS (2 years basis)
9416801 996802 Candle (oil container) Wick (pack of 12)
ASTM D 1401
SCOPE This test method covers measurement of the ability of petroleum oils or synthetic fluids to separate from water. OTHER STANDARDS NFT 60125 - ISO 6614
REF. 941550
Automated Demulsibility Tester, CE tested and approved, controlled by exclusive software with image processing, with the highest degree of repeatability and reproducibility because the layers detections are no longer evaluated by the human eyes but by using a CCD-Camera which takes pictures of every sample tube during testing SPARE PARTS (2 years basis)
11470 941551 9415450 9415459 9417904 Glass graduated cylinder (100 ml) Translucent plate f or bath bottom Stirring paddle Heating element (1000 W) Pt 100 probe (160x5 mm)
REF. 941545
Semi-automatic demulsibility tester microprocessored controlled , three test unit, electronic temperature control between 20 and 95C 0,1C, stirring speed and time control with digital parameters display, moving steel shaft with stirring motor, paddle and inside illumination. SPARE PARTS (2 years basis)
11470 9415450 Glass graduated cylinder (100 ml) Stirring paddle
9417901
9415459 9911489
43
ASTM D 1403
See instrument under ASTM D 5
Cone Penetration of Lubricating Grease Using 1/4 and 1/2 Scale Cone Equipment
SCOPE This test method covers two procedures for measuring the consistency of small samples of lubricating greases by penetration of a or scale cone. OTHER STANDARDS IP 310 - NFT 60140 - ISO 6298
ASTM D 1478
SCOPE This test method covers the determination of the extent to which a grease retards the rotation of a slow-speed ball bearing by measuring starting and running torques at low temperatures (below -20C). QUOTATION ON REQUEST
ASTM D 1480
See instrument under ASTM D 287
SCOPE This test method describes two procedures for the measurement of the density of materials which are fluid at the desired test temperature.
44
ASTM D 1500
SCOPE This test method covers the visual determination of the color of a wide variety of petroleum products such as lubricating oils, heating oils, diesel fuel oils, and petroleum waxes. OTHER STANDARDS IP 196 - NFT 60104 - ISO 2049 - DIN 51578
REF. 9924415
Manual colorimeter model AF650 with a 16 filters colorimetric scale from 0.5 to 8.0 units. It is a 3-field instrument for visually determining the ASTM colour of samples by direct comparison with coloured glass standards. The instrument is delivered with 3 glass sample jar and a calibration certificate for the filters. SPARE PARTS (2 years basis)
19353 22279 Glass sample tube Halogen lamp 12V / 20W
AUTOMATIC APPARATUS
REF. 9926936
ON REQUEST
The Lovibond PFX 190 is an easy to use, automatic instrument requiring no special skills to operate. It is supplied complete with Windows software, accessories and spares, optical glass cells for the colour scales included. Additional scales can be added to standard instruments on request.
REF. 9929006
ON REQUEST
The Lovibond PFX 880/P is an easy to use, automatic instrument, which eliminates time-consuming procedures of visual methods. It is a spectrophotometer for objective colour analysis of petroleum fuels, oils, waxes and petrochemicals according to the Saybolt and ASTM Colour scales
ASTM D 1552
SCOPE This test method covers three procedures for the determination of total sulfur in petroleum products including lubricating oils containing additives, and in additive concentrates. OTHER STANDARDS NFM 07025
REF. 99450
Equipment including electric tube furnace microprocessored digital setting and reading, gas washing bottles, calibrated flowmeter, porcelain combustion tube, combustion boats, boat pusher, bent tube, absorber, burettes with support and clamps. SPARE PARTS (2 years basis)
941472 994012 994024 994062 994501 9414003 9414564 9414701 Burette (25 ml in 0.1ml) Boat pusher Combustion boat (alundum) Combustion tube Heating element f or f urnace Oxygen drying train (3 f lask) A bsorber Right angle connector w ith standard joint
V A Hz Kg mm mm mm
picture not mandatory
45
ASTM D 1657
SCOPE This test method covers the determination of the relative density or density of light hydrocarbons including liquefied petroleum gases (LPG). OTHER STANDARDS IP 235 - NFM 41008 - ISO 3993
REF. 941911
Complete apparatus, mounted on a heavy base and suitable for immersion in a constant temperature water bath.
(3 place)
REF. 9419110
Complete apparatus with burst disk, mounted on a heavy base and suitable for immersion in a constant temperature water bath.
ACCESSORY (required)
941432 Constant temperature w ater bath (3 test)
ACCESSORY (optional)
9923203 Cry os tat TLC 30 - 5 liters (-30/+60C .1)
46
ASTM D 1742
SCOPE This test method covers the determination of the tendency of a lubricating grease to separate oil during storage in both normally filled and partially filled containers.
REF. 941778
6-test unit apparatus, complete, including air-pressure reducing valve and regulator, constant temperature oven, bleeding cups with cover and sieve strainers, with thermometer. SPARE PARTS (2 years basis)
997781 9417782 9418779 9911492 200 mesh stainless steel sieve (type A ) Beaker (20 ml) Heating element (500 W) A STM thermometer 5C
ASTM D 1744
See other application under ASTM D 4377 SCOPE This test method covers the determination of water in the concentration from 50 to 1000 mg/kg in liquid petroleum products. OTHER STANDARDS NFT 60154 - ISO 6296 - DIN 51777
QUOTATION ON REQUEST
ASTM D 1748
SCOPE This test method is used for evaluating the rust-preventive properties of metal preservatives under conditions of high humidity.
QUOTATION ON REQUEST
47
ASTM D 1754
SCOPE This test method covers the determination of the effects of heat and air on a film of semisolid asphaltic materials.
REF. 941876
Strictly conform to ASTM requirements, this is a double wall illuminated oven with glass window, 4 place revolving shelf, 4 aluminium containers and thermometer. ACCESSORIES
998761 A luminium sample container 140x10 mm
ASTM D 1796
See instrument under ASTM D 91
Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
SCOPE This test method covers the laboratory test for determination of water and sediment in fuel oils by using the centrifuge method in the range from 0 to 30 % volume. OTHER STANDARDS NFM 07020 - ISO 3734 - DIN 51793
ASTM D 1831
SCOPE This test method covers determination of the changes in the consistency, as measured by cone penetration, of lubricating greases when worked in the roll stability test apparatus.
REF. 941744
Specially designed twin-unit for long runs at elevated temperature up to 150 C. Delivered with 2 rolls/cylinders, tools and gloves. ACCESSORIES
9417441 9417442 Lubricating grease pump f or bearing (500g) Roller gasket
48
ASTM D 1837
SCOPE This test method is a measure of the relative purity of the various types of liquefied petroleum (LP) gases and helps to ensure suitable volatility performance. OTHER STANDARDS NFM41012 - ISO 6620
REF. 941940
Complete apparatus, with test tube, 2 Dewar flasks and armored thermometer SPARE PARTS (2 years basis)
941297 941942 9915164 9915165 8" cone-shaped tube (100 ml) Unsilvered Dew ar f lask A STM thermometer 99C Sleeve f or 99C thermometer
ASTM D 1838
SCOPE This test method detects the presence of components in liquefied petroleum gases which may be corrosive to copper. OTHER STANDARDS IP 411 - NFM 41007 - ISO 6251
REF. 941432
Electronic constant thermostatic bath , 3 vessels capacity, with thermometer and digital display. Equipped with adjustable stirring device, low water cut-off, cooling coil for external cryostat and drain cock. NECESSARY ACCESSORIES
99486 99493 941905 941906 994871 9414850 9911499 9922505 Multistrip polishing vise Copper strip corrosion test standard Corrosion test vessel (150 x 38 mm) Suspension f or test cylinder Silicon carbide paper 240 grits (pack of 10) Copper strip semi-f inished w ith hole (pack of 24) A STM thermometer 12C Silicon carbide pow der 150 mesh (1 kg)
9417905
9911499 9922505
ASTM D 2001
SCOPE This test method covers the removal of pentanes and lighter hydrocarbons from gasolines, naphthas and similar petroleum distillates to prepare samples suitable for the determination of hydrocarbon types in accordance with Test Method D 1319 or Test Method D 2789.
REF. 19398
Depentanization apparatus complete
49
ASTM D 2002
SCOPE This practice covers the isolation of a representative saturates fraction from depentanized hydrocarbon mixtures that distil below 221C and that contain less than 1 volume percent of olefinic hydrocarbons.
REF. 19399
Complete adsorption column for low olefinic concentration
ASTM D 2003
SCOPE This practice covers the isolation of a representative saturates fraction from depentanized hydrocarbon mixtures that distil below 221C.
REF. 19400
High efficiency column ACCESSORIES
13603 Spherical ground joint w ith nipple
ASTM D 2068
SCOPE This test method describes a procedure for determining the filter blocking tendency (FBT) of distillate fuel oils where the end use demands an exceptional degree of cleanliness. OTHER STANDARDS IP 387
REF. 41800
Automatic portable model NBF 210 with printer to determine FBT. The pressure/flow curve is printed at the end of the test as well as the calculation type and results.
REF. 41801
Automatic bench top model NBF 210 with printer to determine FBT. The pressure/flow curve is printed at the end of the test as well as the calculation type and results. SPARE PARTS (2 years basis)
40390 Printer paper Seyko DPU 414 (roll)
50
ASTM D 2112
See other application under ASTM D 2272 SCOPE This test method utilizes an oxygen-pressured bomb to evaluate the oxidation stability of inhibited mineral oils.
REF. 9416298
Oil thermostatic bath for 2 rotating test vessels
ON REQUEST
ASTM D 2158
SCOPE This test method covers the determination of the extraneous materials weathering above 38C that are present in liquefied petroleum gases. OTHER STANDARDS IP 317
REF. 941957
Apparatus for determining the extraneous residues above 100F Complete with thermometer. SPARE PARTS (2 years basis)
941297 941942 9911492 9911529 8" cone-shaped tube (100 ml) Unsilvered Dew ar f lask A STM thermometer 5C A STM thermometer 57C
picture not mandatory
51
ASTM D 2196
See other application under ASTM D 2669 - D 2983 - D 4287 SCOPE This test method covers the determination of rheological properties of nonnewtonian materials by rotational (Brookfield) viscometer.
QUOTATION ON REQUEST
ASTM D 2265
SCOPE This test method covers the determination of the dropping point of lubricating grease. OTHER STANDARDS ISO 6299
QUOTATION ON REQUEST
ASTM D 2272
See instrument under ASTM D 2112
SCOPE This test method utilizes an oxygen-pressured bomb to evaluate the oxidation stability of new and in service turbine oils having the same composition (base stock and additives) in the presence of water and a copper catalyst coilm at 150C. OTHER STANDARDS IP 229
ASTM D 2273
See instrument under ASTM D 91
SCOPE This test method covers the determination of trace amounts (less than 0.05 volume %) of sediment in lubricating oils.
ASTM D 2274
See instruments under ASTM D 943
SCOPE This test method covers the measurement of inherent stability of middle distillate petroleum fuel under accelerated oxidizing conditions. OTHER STANDARDS IP 388 - NFM 07047 - ISO 12205
52
ASTM D 2386
SCOPE This test method covers the determination of the temperature below which solid hydrocarbon crystals may form in aviation turbine fuels and aviation gasoline. OTHER STANDARDS IP 16 - NFM 07048 - ISO 3013 - DIN 51421
REF.941556
Complete freezing point apparatus, comprising : jacketed sample tube, brass packing gland for stirrer, brass wire stirrer, vacuum flask unsilvered with support and thermometer REFERENCE FLUID (see page 74)
REF. 51042
The NPC 452 allows automatic determination of the freezing point of aviation fuels and antifreeze products. This double-unit analyser is equiped with an integrated cooling unit (+30 to - 70 C). Monitoring is achieved by Windows (c) friendly software.
REF. 51041
Same as 51042 but single place. ALTERNATIVES
51001 51004 A nalyser (2 pl.) f or D2500, D97, D2386 A nalyser (2 pl.) f or D97, D2386
ACCESSOIRES NECESSAIRES
51000 Monitoring computer f or analyser
51146
Stirrer
53
ASTM D 2420
SCOPE This test method covers the detection of hydrogen sulfide in liquified petroleum (LP) gases. OTHER STANDARDS NFM 41011
REF. 941958
Apparatus for hydrogen sulfide in liquefied petroleum gases SPARE PARTS (2 years basis)
9419581 9412209 9417900 Set of glassw are Heating element (1500 W) Pt 100 probe (30x6 mm)
ASTM D 2440
See other application under IP 48 - IP 280 - IP 306 - IP 307 - IP 335 SCOPE This test method indicates the tendency of a mineral insulating oil to deteriorate on oxidation under specified conditions.
REF. 941650
12-test aluminium block bath with electronic controller with digital temperature display and setting, using PT 100 sensor. Temperature can be adjusted between 50 and 210C +/- 0,5C to comply with standards requests. This instrument is delivered without flowmeter, thermometer nor glassware (12 of each must be ordered separately). NECESSARY ACCESSORIES
9416501 9416502 9416503 9925959 9925960 9925961 Flow meter f or 15 l/h air (IP48) Flow meter f or 1 l/h oxygen (IP 280-306-307-335) Glassw are f or A LL methods (set of 2) IP thermometer 81C IP thermometer 15C w ith collar IP thermometer 22C
54
ASTM D 2500
See instruments under ASTM D 97
SCOPE This test method covers only petroleum products which are transparent in layers 40mm in thickness, and with a cloud point below 49C. OTHER STANDARDS IP 219 - NFT 60105 - ISO 3015
ASTM D 2595
SCOPE This test method covers the determination of evaporation loss of lubricating greases at temperatures between 93 and 316C. QUOTATION ON REQUEST
55
ASTM D 2602
See other application under ASTM D 5293 SCOPE This test method covers the laboratory determination of apparent viscosity of engine oils at 0F and at high shear rates. OTHER STANDARDS DIN 51377
QUOTATION ON REQUEST
ASTM D 2619
SCOPE This test method covers the determination of the hydrolytic stability of petroleum or synthetic-base hydraulic fluids.
REF. 941995
oven complete with filtration assembly, 12 bottles, crown cork, copper strips and protections. SPARE PARTS (2 years basis)
997444 999951 999952 999953 9419954 9419955 Gloves (pair) Membrane f ilters (pack of 100) Caps w ith inert seals (pack of 100) Bottle (200 ml) Copper strips (pack of 20) Heating elements f or oven (per set)
ASTM D 2624
SCOPE This test method covers the determination of the electrical conductivity of aviation and distillate fuels with and without a static dissipator additive. OTHER STANDARDS IP 274 - ISO 6297
Battery
REF. 99981
Portable Conductivity meter SPARE PARTS (2 years basis)
999811 Carbon/zinc spare battery (9 V )
56
ASTM D 2669
See instrument under under ASTM D 2196 SCOPE This test method covers the determination of the apparent viscosity of petroleum waxes compounded with additives (hot melts).
ASTM D 2699
See other applications under ASTM D 2700 SCOPE This test method covers the determination of the knock characteristics of motor gasolines, intended for use in spark-ignition engines, in terms of ASTMIP research octane numbers. OTHER STANDARDS IP 237 - NFM 07026 - ISO 5163 - DIN 51756
QUOTATION ON REQUEST
ASTM D 2700
See instruments under ASTM D 2699
SCOPE This test method covers the determination of the knock characteristics of motor and aviation gasolines, intended for use in spark-ignition engines. OTHER STANDARDS IP 236 - ISO 5164
QUOTATION ON REQUEST
ASTM D 2711
See instrument under ASTM D 91
SCOPE This test method covers the measurement of the ability of oil and water to separate from each other.
57
ASTM D 2784
SCOPE This test method covers the determination of total sulfur in liquefied petroleum gases containing more than 1g/g. OTHER STANDARDS IP 243 - NFM 41009 - ISO 4260 - DIN 51408
REF. 9924516
The tester includes metallic structure, stainless steel (not quartz) oxi-hydrogen burner, quartz combustion chamber cooled by water, gas supply system with flowmeters and adjustment valves, gas safeties, dry vacuum pump and protective screen, delivered without glassware NECESSARY ACCESSORIES
21343 9910689 Set of glassw are f or Wickbold Tester Liquef ied gas cylinder w ith valves
9910688
ASTM D 2872
SCOPE This test method is intended to measure the effect of heat and air on a moving film of semisolid asphaltic materials.
REF. 941877
Double wall illuminated oven with glass window, 8 places revolving vertical shelf, 8 glass containers, thermometer and instruction manual. SPARE PARTS (2 years basis)
998762 9418771 9418779 9911500 Bulb 230V /15W Standardized glass container Heating element (500 W) A STM thermometer 13C
ASTM D 2893
See instrument under ASTM D 943
SCOPE This test method covers determination of the oxidation characteristics of extreme-pressure fluid lubricants, gear oils, or mineral oils.
58
ASTM D 2983
SCOPE This test method describes the use of the Brookfield viscometer for the determination of the low-shear-rate viscosity of automotive fluid lubricants in the temperature range from -5 to -40C. OTHER STANDARDS IP 267 - NFT 60152 - ISO 9262 - DIN 51398
QUOTATION ON REQUEST
BROOKFIELD VISCOMETERS (See ASTM D 2196)
ASTM D 3230
SCOPE This test method covers the determination of salts in crude oil. OTHER STANDARDS IP 265
REF. 941287
Complete salt-in-crude analyzer, NEW DESIGNED MODEL, with test cell, electrode assembly and test leads, digital autoranging meter for reading the voltage and current. SPARE PARTS (2 years basis)
9412871 9412872 Electrode w ith cover Test cell
ASTM D 3235
See instrument under ASTM D 721
SCOPE This test method covers the determination of solvent extractables in petroleum waxes.
59
ASTM D 3278
See other applications under ASTM D 3828 SCOPE This test method covers the determination of flash points of liquids by the Setaflash closed cup tester .
QUOTATION ON REQUEST
ASTM D 3427
SCOPE This test method covers the ability of a petroleum-type steam turbine oil to separate entrained air. OTHER STANDARDS IP 313 - NFT 60149 - DIN 51381
REF. 941688
Complete equipment for determination of the ability of an oil to separate entrained air in hydraulic, turbine and other lubricating oils. ACCESSORIES
12628 12629 996885 9921375 5 ml plunger 10 ml plunger Balance w ith acquisition sof tw are (62 g / 0,1 mg) Electronic stopw atch
60
ASTM D 3828
See instruments under ASTM D 3278
SCOPE This test method covers procedure for the determination of the flash point by a small scale closed tester. OTHER STANDARDS IP 303 - ISO 3679
ASTM D 3829
See other application under ASTM D 4684 SCOPE This test method covers the prediction of the borderline pumping temperature (BPT) of engine oils through the use of a 16 h cooling cycle over the temperature range from 0 to -40C. OTHER STANDARDS SAE J300
QUOTATION ON REQUEST
ASTM D 3948
See other application under ASTM D 4860 SCOPE This test method provides a rapid portable means for field and laboratory use to rate the ability of aviation turbine fuels to release entrained or emulsified water when passed through fiberglass coalescing material.
QUOTATION ON REQUEST
ASTM D 4007
See instrument under ASTM D 91
Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
SCOPE This test method describes the laboratory determination of water and sediment in crude oils by means of the centrifuge procedure.
61
ASTM D 4057
SCOPE This practice covers procedures for manually obtaining representative samples of petroleum products of a liquid, semi-liquid, or solid state whose vapor pressure at ambient conditions is below 101 kPa. OTHER STANDARDS NFM 07001 - ISO 3170 - DIN 51750
REF.9922213
Brass weighted bottle, neck 19mm.
REF.9922214
Brass weighted bottle, neck 38mm
REF.9919032
Sampling thief, bomb type (1 liter) diameter 80 mm. NECESSARY ACCESSORIES
9919035 9919036 9919037 9919039 Chain Chain Chain Nylon nickel-plated brass 5 m length nickel-plated brass 10 m length nickel-plated brass 15 m length cable 50 m length
ASTM D 4287
See instrument under ASTM D 2196
SCOPE This test method covers the determination of high-shear viscosity using the ICI cone/plate viscometer.
ASTM D 4377
See instrument under ASTM D 1744
SCOPE This test method covers the determination of water in the range from 0.02 to 2% in crude oils. OTHER STANDARDS IP 356
62
ASTM D 4530
See other application under ASTM D 189 - D 482 SCOPE This test method covers the determination of the amount of carbon residue formed after evaporation and pyrolisis of petroleum materials under certain conditions and is intended to provide some indication of the relative coke forming tendency of such materials. OTHER STANDARDS IP 398 - ISO 10370 - DIN 51551
REF. 41023
The NMC 440 model, fully automatic tester, provides 3 preset methods plus 17 additional ones with 4 heating segments. It performs Conradson and ash test up to 750C under automatic controlled atmosphere. Test report including weights, results and temperature curve printed on any standard printer or send to computer throught RS232C output. NECESSARY ACCESSORIES
10510 41001 41002 41003 41004 Porcelain crucible,130 ml tall f orm (pack of 6 ) 2 ml borosilicate glass sample vial (MCR) 16 ml borosilicate glass sample vial (MCR) 2 ml quartz sample vial f or ash content 16 ml quartz sample vial f or ash content
OPTIONAL ACCESSORIES
41025 41026 41027 10508 10515 Gas connection kit-2 gas outputs 4 ml borosilicate glass sample tube (MCR) Holder f or 25-50-100 gr porcelain crucibles Porcelain crucible, 54 ml tall f orm (pack of 6 ) Porcelain crucible, 80 ml low f orm (pack of 6 )
63
ASTM D 4684
See instrument under ASTM D 3829
Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
SCOPE This test method covers the measurement of the yield stress and viscosity of engine oils after cooling at controlled rate over a period exceeding 45 h to a final test temperature between -10 and -40C.
ASTM D 4860
See instrument under ASTM D 3948
Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Rating)
SCOPE This test method provides a rapid, portable means for field and laboratory use to visually inspect for particulate matter and numerically rate free water in aviation turbine and distillate fuels.
ASTM D 5133
SCOPE This test method determines the temperature at which an oil can become unsuitable for lubrication of a mechanical device such as an engine, because of insufficient flow of the bulk oil in the sump to the oil screen.
QUOTATION ON REQUEST
ASTM D 5191
SCOPE This test method covers the use of automated vapor pressure instruments to determine the total vapor pressure exerted in vacuum by air-containing, volatile, liquid petroleum products.
QUOTATION ON REQUEST
64
ASTM D 5293
See instrument under ASTM D 2602
SCOPE This test method covers the laboratory determination of apparent viscosity of engine oils at temperatures between -5 and -30C at shear stresses of approximately 50000 to 100000 Pa and shear rates of approximately 100000 to 10000 s-1 and viscosities of approximately 500 to 10000 mPa*s.
ASTM D 5800
SCOPE This test method covers a procedure for determining the evaporation loss of lubricating oils (engine oils) using the Noack evaporative tester. OTHER STANDARDS NFT 60161 - DIN 51581- CEC L40 A93
REF. 941783
Evaporative capacity tester for lubricating oils, complete with P I D temperature regulator, set of glassware, manometer and liquid, one crucible with tools, one pair protecting gloves, thermometer with certificate. OPTIONAL ACCESSORIES
997837 997838 9417831 9417832 9921375 Standardization oil RL 172/4 (1 liter) V acuum pump model ME2C A utomated vacuum controller Graphic data recorder and printer Electronic stopw atch
ASTM D 6082
SCOPE This test method describes the procedure for determining the foaming characteristics of lubricating oils (specifically transmission fluid and motor oil) at 150 C.
REF. 9416432
Sequence Four test bath for 2 test at 150C. Ready to use and delivered with two test cylinders, calibrated flowmeters and stainless steel diffusers. OPTIONAL ACCESSORIES
9416431 9416434 A utomatic time sequencer Oil polyalphaolef in f or bath (can of 25 l)
65
ASTM D 6371
See other application under IP 309 - IP 419
SCOPE This test method covers the determination of the cold filter plugging point (CFPP) of diesel and domestic heating fuels using either manual or automated test equipment.
REF. 20878
This model, single unit includes double wall bath with insulation, jacket, test tube, insulating ring and spaces, jacket stand, 3-hole stopper, pipet, filtration set and thermometers. NECESSARY ACCESSORIES
27502 20879 V acuum pump V acuum regulator + manometer + 3w ay cock
REF. 41700
UNTIL STOCK EXHAUSTION Standard model NSF 420 delivered complete for the CFPP and SFPP test methods with printer. Cryostat is not included .
REF. 41702
UNTIL STOCK EXHAUSTION standard model NSF 420 without SFPP Kit. NECESSARY ACCESSORIES
21130 9923205 Insulated silicone tube connection (1 meter) Cryostat TLC 80 - 11 liters (-80/+20C .05)
REF. 51052
The NTL 452 allows automatic determination of cold filter plugging point. This double-unit analyser is equiped with an integrated cooling unit (+30 to - 70 C). Monitoring is achieved by Windows (c) friendly software.
REF. 51051
Same as 51052 but single place. ALTERNATIVES (all with cooling)
51002 51003 51005 A nalyser (2 pl.) f or D2500, D97, IP309 A nalyser (2 pl.) f or D2386, IP309 A nalyser (2 pl.) f or D97, IP309
NECESSARY ACCESSORIES
51000 Monitoring c omputer f or analys er
40809 40822
51116
66
IP 48
See instrument under ASTM D2440
SCOPE This test method indicates the tendency of a lubricating oil to deteriorate on oxidation under specified conditions.
IP 59
SCOPE This test method is used for the determination of the density or relative density of petroleum products as normally handled.
REF. 941960
Effusiometer Schilling, complete with thermometer but without stand. OPTIONAL ACCESSORY
941961 Metallic stand
IP 70
Redwood Viscosity
SCOPE The method is primarily intended for the determination of the viscosity of any petroleum product which flows in a Newtonian manner, i.e. possesses a linear relationship between shearing stress and rate of shear under the conditions of the test.
QUOTATION ON REQUEST
IP 72
SCOPE This test method provides a measure of the viscosity by determining the time of efflux of 50 ml of a cut-back bitumen, at 40C, through a 10mm orifice. OTHER STANDARDS NF T66005 - DIN 1995
REF.941826
BRTA viscometer (4 unit) with electronic controller, electric stirring, digital display, 4 receivers but without cup and valve. NECESSARY ACCESSORIES
941829 941830 941831 941832 941833 9417709 9417902 9921367 9921375 Graduated receiver Cup w ith orif ice 4 mm Cup w ith orif ice 10 mm Ball valve 4 mm Ball valve 10 mm Heating element (1000 W) Pt 100 probe (60x5 mm) IP thermometer 8C Electronic stopw atch
67
IP 80
SCOPE This test method determines the temperature below which a bitumen tends to break rather than flow when stressed. OTHER STANDARDS NF T66026 - DIN 52012 QUOTATION ON REQUEST
IP 143
SCOPE This test method specifies a procedure for the determination of the heptane insoluble asphaltene content of gas oil, diesel fuel, fuel oils, lubricating oil, bitumen and crude petroleum which has been topped to an oil temperature of 260C. OTHER STANDARDS NF T60115 - DIN 51595
REF. 10479
Complete manual apparatus including extractor, condenser, evaporation cup, heating mantle and filter paper. NECESSARY ACCESSORIES
14694 15643 23860 Evaporation cup Filter paper - diameter 110 mm (pack of 100) Electric heating mantle (1500 W)
REF. 24472
ASPHAN 02 semi-automatic extractor for stand-alone precipitation, filtration, washing, recycling, redissolution and evaporation processes of asphaltene. SPARE PARTS (2 years basis)
21364 21365 21368 21369 21372 500 ml low er boiler 1000 ml upper boiler w ith stopper Condenser of the collector 500 ml solvent collecting f lask Filter "Mitex" (box of 50)
V A Hz Kg mm mm mm
picture not mandatory
68
IP 161
See instrument under ASTM D1267
SCOPE This test method describes a method for the determination of gauge vapor pressures of liquefied petroleum gas products at temperatures within the approximate range of 35 to 70C.
IP 170
SCOPE This test method covers the determination of the closed cup flash point of petroleum products and other liquids having flash point between -30 and 70C. OTHER STANDARDS NFT 66009 - DIN 51755
REF. 941601
Manual apparatus Abel model NAB 110, with electric heater and gas test jet. OPTIONAL ACCESSORIES
941143 Energy regulator
REF. 41300
Automatic Abel Tester model NAB 440 equipped with very large display and printer, it is designed to operate from -30 to +110 C and can be connected to a cryostate for test under 40C. User-friendly software allows full configuration and recording of 100 test results. OPTIONAL ACCESSORIES
9923203 9923204 Cryostat TLC 30 - 5 liters (-30/+60C .1) Cryostat TLC 40 - 11 liters (-45/+20C .05)
69
IP 227
See instrument under ASTM D130
SCOPE This test method specifies a method for the determination of the corrosive tendencies towards silver, of aviation turbine fuels.
IP 280
See instrument under ASTM D2440
SCOPE This test method specifies a method for the determination of the resistance to oxidation under specified conditions of unused inhibited mineral turbine oils.
IP 294
SCOPE This test method covers procedures for evaluating the shear stability of polymer-containing oils in terms of the permanent viscosity loss resulting when a sample is mechanically stressed under the test conditions.
QUOTATION ON REQUEST
IP 306
See instrument under ASTM D2440
SCOPE This test method indicates the tendency of straight mineral oil to deteriorate on oxidation under specified conditions.
IP 307
See instrument under ASTM D2440
SCOPE This test method indicates the tendency of insulating oil to deteriorate on oxidation under specified conditions.
70
IP 309
See instrument under ASTM D 6371
SCOPE This test method covers the determination of the cold filter plugging point (CFPP) of diesel and domestic heating fuels using either manual or automated test equipment.
71
IP 335
See instrument underASTM D2440
SCOPE This test method gives a measure of the tendency of new, inhibited, mineral insulating oils to oxidize by measurement of an induction period.
IP 419
See instruments under ASTM D 6371
SCOPE This test method covers the automatic determination of the simulated filter plugging point (SFPP) of middle distillate fuels.
ISO 3679
SCOPE This test method covers determination of the flash point at set temperature in closed cup. OTHER STANDARDS NFT 30051
REF.41400
Complete Closed Cup Flash Point Tester. The model NPV 210 is designed for paint, supple, japan, laque, solvent, cosmetic, perfume, distillate and various petroleum products. NECESSARY ACCESSORIES
9921604 9926075 Loading syringe (pack of 100) Mercury thermometer f or calibration purposes
OPTIONAL ACCESSORIES
9923203 Cryostat TLC 30 - 5 liters (-30/+60C .1)
Detector lead
heating c artridge 250W
72
UOP 357
SCOPE This test method covers determination of traces of sulfur in petroleum distillates by the nickel reduction method.
REF.941489
Complete equipment with heating mantle, glassware and energy regulator. SPARE PARTS (2 years basis)
994891 994896 9414891 9414892 9414893 9414894 9414895 9414896 Heating mantle 100 ml (60 W) Nickel Reaney catalyst (100 g) Inlet tube Condenser Reaction f lask Funnel Test tube Outlet tube
73
VOLUME
PRICE
GASOLINE
9930101 9930102 9930103 9930104 9930105 9930106 9930107 9930109 9930110 9931101 9931102 9931103 9931104 9931107 9931109 9931110 9931111 9931112 9931113 9931114 9931116 9932101 9932103 9932104 9933101 9933103 9933104 9933106 9933107 9934101 9934102 9934103 9934104 9934105
D 4052 D 323 D 525 D 86 D 86 D 1319 D 130 D 2700 D 2699 D 4052 D 2500 D 97 IP 309 D 613 D 86 D 445 D 445 D 93 D 4294 D 5453 D 2500 D 4052 D 2386 D 445 D 4052 D 611 D 445 D 92 D 93 D 4530 D 5291 DIN 51900 D 5291 D 5291
density at 15 C reid vapour pressure induction period (benzine) automatic distillation (unleaded) automatic distillation (naphta) aromatics (unleaded) copper strip corrosion (naphta) motor octane index (unleaded) research octane index (unleaded) density at 15 C cloud point pour point cold filter plugging point cetane index (measured) automatic distillation kinematic viscosity at 20 C kinematic viscosity at 40 C Pensky-Martens flash point sulfur content sulfur content cloud point density at 15 C congeling point kinematic viscosity at -20 C density at 15 C aniline point kinematic viscosity at 50 C Cleveland flash point Pensky-Martens flash point conradson carbon nitrogen value calorific value carbon value hydrogen value
756 kg/m 56.5 kPa 43/175 C 112/165 C 12 % 1A 87.6 98.7 840 kg/m -5 C -30 C -18 C 48.8 180/370 C 3.5 cSt 2.4 cSt 60 C 355 mg/kg 40 mg/kg + 4C 790 kg/m -52 C 4.18 cSt 880 kg/m 106 57 cSt 263 C 216 C 15 % 0.33 % weight 42 Mj/kg 85 % weight 11 % weight
250 ml 250 ml 250 ml 250 ml 250 ml 250 ml 250 ml 1000 ml 1000 ml 250 ml 250 ml 250 ml 250 ml 1000 ml 250 ml 250 ml 250 ml 250 ml 50 ml 50 ml 250 ml 250 ml 250 ml 250 ml 250 ml 250 ml 250 ml 250 ml 250 ml 50 ml 50 ml 50 ml 50 ml 50 ml
DIESEL
KEROZENE
LUBRICANT
RESIDUE
NOTICE
N A : not available
74
ASTM E 1
ASTM ref. n 1C 2C 3C 5C 6C 7C 8C 9C 10C 11C 12C 13C 14C 15C 16C 17C 18C 19C 20C 21C 22C 23C 24C 25C 26C 27C 33C 34C 35C 36C 37C 38C 39C 40C 41C 42C 44C 45C 46C 47C 49C 52C 54C 56C 57C 58C 59C 60C 61C 62C 63C 64C 65C 66C 67C 68C 69C 70C 71C 72C 73C 74C 9911489 9911490 9911491 9911492 9911493 9911494 9911495 9911496 9911497 9911498 9911499 9911500 9911501 9911502 9911503 9911504 9911505 9911506 9911507 9911508 9911509 9911510 9911511 9911512 9911513 9911514 9911515 9911516 9911517 9911518 9911519 9911520 9911521 9911522 9911523 9911524 9915629 9915630 9915631 9915632 9911525 9911526 9920218 9911528 9911529 9905803 9905903 9906003 9911530 9911531 9911532 9911533 9911534 9911535 9911536 9911537 9911538 9911539 9920219 9902603 9915633 9902703 range C -20/+150 -5/+300 -5/+400 -38/+50 -80/+20 -2/+300 -2/+400 -7/+110 +90/+370 -6/+400 -20/+102 +155/+170 +38/+82 -2/+80 +30/+200 +19/+27 +34/+42 +49/+57 +57/+65 +79/+87 +95/+103 +18/+28 +39/+54 +95/+105 +130/+140 +147/+182 -38/+42 +25/+105 +90/+170 -2/+68 -2/+52 +24/+78 +48/+102 +72/+126 +98/+152 +95/+255 +18.5/+21.5 +23.6/+26.1 +48.6/+51.4 +58.6/+61.5 +20/+70 -10/+5 +20/+100 +19/+35 -20/+50 -34/+49 -18/+82 +77/+260 +32/+127 -38/+2 -8/+32 +25/+55 +50/+80 +75/+105 +95/+155 +145/+205 +195/+305 +295/+405 -37/+21 -19.4/-16.6 -41.4/-38.6 -55.4/-52.6
Thermometers
grad C 1 1 1 1 1 1 1 0.5 2 2 0.2 0.5 0.1 0.2 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.1 0.5 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.5 0.05 0.05 0.05 0.05 0.2 0.1 0.2 0.02 0.5 0.5 0.5 1 0.2 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.5 0.5 0.5 0.05 0.05 0.05 depth mm 76 76 76 108 76 total total 57 57 25 total total 79 total total total total total total total total 90 90 90 total 76 50 50 51 45 100 100 100 100 100 100 total total total total 65 total total total 57 total total total 79 total total total total total total total total total 76 total total total price ASTM ref. n 82C 83C 84C 85C 86C 87C 88C 89C 90C 91C 92C 93C 94C 95C 96C 97C 98C 99C 100C 101C 102C 103C 104C 105C 106C 107C 110C 111C 112C 113C 114C 116C 117C 118C 119C 120C 121C 122C 123C 124C 125C 126C 127C 128C 129C 9911540 9911541 9911542 9911543 9911544 9911545 9911546 9911547 9911548 9911549 9911550 9911551 9911552 9911553 9911554 9909703 9909803 9915164 9911555 9911556 9911557 9911558 9911559 9911560 9911561 9911562 9915634 9911563 9911564 9911565 9911566 9920220 9920221 9915635 9920222 9910025 9910026 9901223 9901233 9901243 9901253 9901263 9901273 9901283 9901293 range C -15/+105 +15/+70 +25/+80 +40/+150 +95/+175 +150/+205 +10/+200 -20/+10 0/+30 +20/+50 +40/+70 +60/+90 +80/+110 +100/+130 +130/+150 -18/+47 +16/+82 -40/+4 +145/+205 +195/+305 +123/+177 +148/+202 +173/+227 +198/+252 +223/+277 +248/+302 +133.6/+136.4 +170/+250 +4/+6 -1/+20 -80/+20 +18.9/+25.1 +23.9/+30.1 +28.6/+31.4 -38.3/-30 +38.5/+41.5 +98.5/+101.5 -45/-35 -35/-25 -25/-15 -15/-5 -27.4/-24.6 -21.4/-18.6 -1.4/+1.4 +91.6/+94.4
grad C 1 1 1 1 1 1 1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.5 0.5 0.2 0.2 0.5 0.2 0.2 0.2 0.2 0.2 0.2 0.05 0.2 0.02 0.5 0.5 0.01 0.01 0.05 0.1 0.05 0.05 0.1 0.1 0.1 0.1 0.05 0.05 0.05 0.05
depth mm 30 40 249 181 35 40 57 76 76 76 76 76 76 76 76 total total 35 76 76 100 100 100 100 100 100 total 100 total total total total total total 100 total total total total total total total total total total
price
Special with collar 9C 9900903 -7/+110 10C 9901003 +90/+370 23C 9902303 +18/+28 24C 9902403 +39/+54 25C 9902503 +95/+105 9915165
57 57 90 90 90
See overleaf
75
IP Thermometers
IP n 2C 3C 8C 9C 18C 22C 30C 37C 38C 39C 42C 44C 71C 72C 81C 91C 98C ref. range C -80/+20 -1/+105 0/+45 +40/+85 +20/+100.6 +195/+205 +23.6/+26.4 +144/+156 +23/+27 -1/+38 -38/+30 +15/+30 -27.4/-24.6 -37/+21 +98/+152 0/+110 +100/+300 grad C 1 0.5 0.2 0.2 0.2 0.1 0.05 0.2 0.1 0.1 0.5 0.2 0.05 0.5 0.2 1 2 depth mm 108 total 65 65 total 100 total 100 total total 250 22 total 76 100 44 44 price
9921229 9921049 9921367 9921369 9921826 9925961 9921651 9903703 9903803 9921675 9911337 9921915 9921650 9907203 9925959 9923184 9923185
special with collar 15C 9925960 -5/+110 74C 9921227 -35/+70 75C 9921228 -30/+80
Miscellaneous Thermometers
Ref. 9900010 9900040 9900060 9900080 9900100 9900759 9907839 9909124 9915287 Description General purpose 50/100C in 0,1C General purpose 20/40C in 0,05C General purpose 50/60C in 0,05C General purpose 60/80C in 0,05C General purpose 80/100C in 0,05C Thermometer for grease worker Thermometer with certificate +40/+260C Thermometer ISO 653 Thermometer AFNOR -15/+45C Price Ref. 9915288 9915351 9915352 9926075 9927251 9927252 Description Thermometer AFNOR +35/+85C Thermometer 75F for ASTM D1177 Thermometer 76F for ASTM D1177 Mercury thermometer for calibration Engler with ring +10/+55C in 0.5C Engler with ring +10/+110C in 1C Price
76
ASTM D113 ASTM D113 ASTM D1142 ASTM D1142 ASTM D1160 ASTM D1177 ASTM D1265 ASTM D1265 ASTM D1265 ASTM D1265 ASTM D1266 ASTM D1266 ASTM D1319 ASTM D1319 ASTM D1322 ASTM D1401 ASTM D1401 ASTM D1500 ASTM D1552 ASTM D156 ASTM D1657 ASTM D1657 ASTM D1742 ASTM D1754 ASTM D1831 ASTM D1837 ASTM D189 ASTM D2001 ASTM D2002 ASTM D2003 ASTM D2068 ASTM D2068 ASTM D2112 ASTM D2158 ASTM D2386 ASTM D2386 ASTM D2420 ASTM D2440 ASTM D2619 ASTM D2624 ASTM D2784 ASTM D287 ASTM D2872 ASTM D322 ASTM D322 ASTM D323 ASTM D3230 ASTM D3427 ASTM D36 ASTM D36 ASTM D36 ASTM D36 ASTM D381 ASTM D381 ASTM D4057 ASTM D4057 ASTM D4057
9418641 9418642 941975 9419751 9411280 9411520 99501 991001 992251 994541 941454 941455 941505 9415050 941680 941545 941550 9924415 99450 941520 941911 9419110 941778 941876 941744 941940 941653 19398 19399 19400 41800 41801 9416298 941957 941556 51042 941958 941650 941995 99981 9924516 14854 941877 9916682 9916683 941432 941287 941688 40100 9418314 9418324 9418334 941302 941303 9922213 9922214 9919032
Ductility meter (100 cm) Ductility meter (150 cm) Dew-point tester 3 to 15 psi Dew-point tester 0 to 350 psi Distillation at reduced pressure (1 to 50 mmHg) Freezing point Stainless steel sampling vessel (500 cc) Stainless steel sampling vessel (1000 cc) Stainless steel sampling vessel (2250 cc) Stainless steel sampling vessel (1gallon)
13 13 37 37 37 38 39 39 39 39 40 40 42 42 43 43 43 45 45 15 46 46 47 48 48 49 15 49 50 50 50 50 51 51 53 53 54 54 56 56 58 17 58 18 18 19 59 60 4 4 4 4 20 20 62 62 62
P 454 P455 P 505 P 505C P 680 P 545 P 550 P 450 P 520L P 911 P 778 P 876 P 744-2B P 940 P 653
Sulphur determination in petroleum (6-unit) Sulphur determination in LPG (6-unit) Adsorption apparatus 2 standard columns Adsorption apparatus twin true bore columns Smoke point apparatus Tester for demulsibility of oils Automated demulsibility tester Colorimeter with colour disc Tube furnace for sulphur determination Saybolt chromometer Tester for specific gravity of LPG Same apparatus with burst disc Oil separation from grease during storage Effect of heat and air on asphaltic material Roll stability Tester Tester for Volatility of LPG Conradson carbon residue apparatus Depentanization apparatus Complete absorption column (method B) High efficiency column Automatic FBT tester (NBF 210) Complete bench top model with printer
Oil thermostatic bath for 2 vessels Tester for determination of extraenous materials Complete freezing point apparatus Automated freezing point (NPC 452) Hydrogen sulfide in liquefied petroleum gases Oxidation tester for lubricating oils (12 test) Tester for hydrolytic stability of fluids Portable Conductivity meter Wickbold Tester for sulphur content 6-unit ramp in stainless steel
P 877
Complete RFTOT oven Gasoline diluent tester (gas heating) Gasoline diluent tester (electric heating)
Constant temperature water bath (3 test) Salts in crude oil tester Impinger test rig Automatic softening point tester (NBA 440) Ring and ball apparatus (tapered ring) Ring and ball apparatus (shouldered ring) Ring and ball apparatus (straight ring) Air jet apparatus for determination of gums Air/steam jet apparatus for determination of gums Brass weighted bottle (neck 19mm) Brass weighted bottle (neck 38mm) Sampling thief (vessel type)
77
78
79
page 32 62 6 15 20 19 25 27 32 14 10 48 28 42 45 57 43 40 52 53 49 46 58 41 54 49 39 72 21 41 28 44 13 11 15 26 9 34 31 42 43 33 16 43 32 60 35 31 59 47 33 65 2 13 5 4 69 3 38
DIN DIN 51377 DIN 51381 DIN 51406 DIN 51408 DIN 51411 DIN 51421 DIN 51550 DIN 51551 DIN 51560 DIN 51565 DIN 51571 DIN 51575 DIN 51577 DIN 51578 DIN 51579 DIN 51580 DIN 51580 DIN 51581 DIN 51585 DIN 51587 DIN 51595 DIN 51610 DIN 51616 DIN 51750 DIN 51751 DIN 51754 DIN 51756 DIN 51757 DIN 51758 DIN 51759 DIN 51771 DIN 51775 DIN 51776 DIN 51777 DIN 51780 DIN 51789 DIN 51791 DIN 51793 DIN 51799 DIN 52010 DIN 52011 DIN 52013 AUTRES UOP 357 SAE J300 CEC L40
ISO ISO 1523 ISO 2049 ISO 2137 ISO 2160 ISO 2176 ISO 2192 ISO 2592 ISO 2719 ISO 2908 ISO 2977 ISO 3007 ISO 3013 ISO 3014 ISO 3015 ISO 3016 ISO 3104 ISO 3170 ISO 3405 ISO 3675 ISO 3675 ISO 3679 ISO 3733 ISO 3734 ISO 3735 ISO 3837 ISO 3987 ISO 3992 ISO 3993
80