Power Mate/16/18
RS-232C COMMUNICATION, Cable details for 0-
ON_PCR on CNC system 9 PIN ON PC(COM1)
SHORT PINS 5, 15 SHORT PINS 7, 8
SHORT PINS 3, 7, 13 SHORT PINS 1, 4, 6
PIN IL - PIN 2
PIN 1 PIN 3
PIN 2. PINS
ON PCR on CNC system 25 PIN ON PC(COM1.
SHORT PINS 5, 15 SHORT PINS 4, 5
SHORT PINS 3, 7, 13 SHORT PINS 20, 8, 6
PIN 11 - PIN3
PIN 4 PIN 2
PIN 2 ~ PIN7
For transfer of Parameters, Partprogram, Diagnosis bits,
Set following parameters in the FANUC system-0-I,PM/16/18/21 for transferring
pérameters, partprogram etc
ISO:
20
P 101.
P101.3=1
P 10:
P 10
11 for 9600 Baud
=10 for 4800 Baud
The above setting signifies 8 databits,2 stop bits and no parity. Hence set
corresponding parameters on your personal computer
For Ladder Transfer
For Transferring Ladder logic , the parameters have to be set inside PMC ~SPEED
menu
Press PMC then > key then SPEED menu . set the parameters here for 9600 baud,
2 stop bits and No parity
On the CNC go to PMC. then > key, MONIT, then ONLINE . Set RS-232 USE in
the USE/NOT USE tab.
Put it back to the NOT USE tab after transferring.