Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1. Introduction This power supply is exclusively designed for CO2 laser machine. The output current can be set by user within the max. 2. Specifications
Working Environment Condition Output
Input Accuracy Efficiency Protected Current Response Time Switch Power Adjustment Size Weight Temperature Moisture Voltage Current 2% 95% 28 1mA 0.2 ms O and 1, TTL 05V analog or PWM signal 245 185 100 mm Net 3.1 Kg, Gross 3.5Kg -10 +40 85 Max DC35KV DC (028) mA
3. Wiring Method Connect the RED wire to the laser tube positive end. Connect the BLACK wire to the laser tube negative end. Details refer to the Port Definition diagrams.
-1-
4. Caution Keep minimum 100 mm clear space out of the cooling fan! Be careful with GND connection for the laser machine! Must connect the RED wire to the laser tube positive end before power on! Must connect the Neutral wire. Three-end plug should be applied with FG10
Definition
Definition
Active-high Live wire Working Neutral wire Ground wire
-2-
Remark: BJ-801 is able to work with 60W CO2 laser cube as well. For 60W laser tube, the wiring method is as same as for 80W s. Please be ware of the current as below.
CO2 Laser Tube 80W 60W Rated Current (A) 26 22/23* Max. Current (A) 28 25/26*
Leetro Automation Co., Ltd Building 8-B, Dayi Zone of Incubating Hi-tech,
No.1 South 2nd Keyuan Road,