Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
BTS 3900
BTS 3900
Radio Frequency Unit GSM Antenna & TMA Control Module BaseBand processing Unit (CPU) Direct Current Distribution Unit
Overview
Overview
Hardware Components
TRX Evolution
DRFU (2 TRX)
GRFU (6 TRX)
ERICSSON RBS
HUAWEI BTS
Power Sharing
Advantage of SDR
GSM/UMTS co-exist
SCPA vs MCPA
ERICSSON RBS
HUAWEI BTS
Challenges of SCPA
Benefits of MCPA
47 dBm
43 dBm 40 dBm
Capacity Enhance
Antenna Reduction
3rd Cab
2nd Cab
3rd Cab
2nd Cab
MRFUBBU Topology
Comparison of Topology
TRX Board No/Slot No Board Type TRX Board Pass No RXU Name RXU Chain No RXU Chain HeadPN TRX Number Com/Uncom port TRX Power Type Band Solution Old Value
New Value Frequency Frequency Hopping mode Cell HSN Cell TSC BCCH frequency Cellwise frequency list(900) Cellwise frequency list(1800) Modification reason
TRX Frequ Trx Com/ Cell TRX Board Trx Sol ency Site Board Board RXU RXUChain RXU Chain Stat Unco Old New Frequ Cell BSC Nam Numb No/Sl Power Band utio HOPPI Name type Pass Name No Head PN us m value value ency HSN e er ot No Type n NG No port Mode
Cell wise BCCH Cell wise Cell freque MAIO freque frequency TSC ncy ncy list(900) list(18 00)
1.Open the LMT. 2.Select BSC name->site name->cell name. 3.Board type is here DRFU. 4. Select the DRFU(alternate name RXU) where the TRX will be add/del. 5.Define the Pass no (logical position of TRX in DRFU) of the TRX. Pass:0 is the 1st TRX Pass:1 is the 2nd TRX in a DRFU 6.Define the TRX No (logical TRX No) for TRX add. In LMT only active TRX No is shown. For deleting an active TRX, need to mention the active TRX NO.
7.Find the slot/board no of the DRFU(logical position of DRFU in cabinet) which is known as TRX Board/port no.
8.Find the RXU chain no and RXU chain head port no under which the DRFU is configured.
9. Status-> it means whether to activate or deactivate TRX. 10. Com/Uncom port-> Tx independent(No combining) or combining(Basically defines the send mode). 11. TRX Power type -> Defines the power type according to frequency band. 900 TRX power type=20W 1800 TRX power type=18W(for DBS 3900,power type=10W) 12. Band-> Frequency band type (GSM900/GSM1800) 13. Solution-> depends on install TRX value(uncombined/2 TRX combined+1 TRX uncombined/Nothing).In BTS 3900,solution type Nothing is very common.
14. Old value-> install TRX(UL+OL) and active TRX(UL+OL) before TRX add/del.
15. New Value-> active TRX(UL+OL) after TRX add/del.
16.Frequency-> Planned to be add/del in the case of 900 band. 17.Frequency Hopping mode-> baseband/synth in TRX level. 18.Cell HSN->important for 1800 band. Need to define in TRX level. 19.Cell TSC-> Need to define BCC value of the cell in each of its TRX level. 20.MAIO-> important for 1800 band. Need to define in TRX level. 21.BCCH frequency->BCCH frequency of the cell. 22.Cell wise frequency list(900)-> proposed cell wise 900 frequency list after add/del TRX in the cell. 24. Cell wise frequency list(1800)-> planned to be add/del in the case of 1800 band.
Glossary
Thank You
Q & A ??
DRFU
BBU
BTS 3900