Roll No. .... J
Total No. of Questions : 13] [Total No. of Pages : 03
J-3377[S-1233] [2037]
B.Sc. (CST) (Semester - 1°)
BASIC ELECTRONICS (B.Sc. (CST) - 102) :
‘Time : 03 Hours Maximum Marks : 75
Instruction to Candidates:
1) Section - A is compulsory.
2) Attempt any,Nine questions from Section - B.
Section - A
Ql) . . *° (5x2=30)
a) How semiconductors differ from conductors?
b) What are the different types of electron emission in a metal? |
c) Whatis the difference between vacuum diode and semiconductor diode?
4) What do you mean by mobility of charge carriers?
e) What is Hall Effect?
£) Draw the sketch for the inputs put waveforms of half wave bride rectifier
circuit. . -
g) Why biasing is required in a transistor circuit?
h) Draw the symbol for p-channel field effect transistor?
i) What is OPAMP?
PIO.j) Give the truth table for NOR gate.
k) State De-Morgan’s theorem.
1) What are the components of a CRO?
m) What are the primary colours in colour television?
n) What are ground waves? Where are they used?
0) What do you mean by ionosphere?
Section - B
(9x5=45)
Q2) The space charge limited current in a plane parallel vacuum diode is 300 mA
for an anode voltage of 200V. What is the anode voltage for a space charge
limited current of 200 mA? :
93) A conductor material has free electron density of 10 electrons per cubic
meter. When a voltage is applied, a constant drift velocity of 1.5 x 10°? m/s is
attained by the electrons. If the cross-sectional area of the material is 1 cm?,
calculate the magnitude of current. Charge of an electron is 1.6 10"! coulomb.
04) What do you mean by Intrinsic, n-type and p-type semiconductors?
QS) What are the applications of Hall Effect?
Q6) Draw the I-V characteristics of a diode. What do you mean by reverse saturation
current?
Q7) Draw and explain the output characteristics of a bipolar transistor in CE mode.
J- 33778-1233] 2@8) Prove that in case of a JFET:
Amplification factor = Transconductance x AC Drain Resistance.
Q9) Explain how an OPAMP can be used as an adder?
Q10)Convert the decimal numbers (431)y» and (324), into binary numbers and
perform binary addition of those two numbers.
Q11)Simplify the Boolean expression:
v=[(a+a) +c/]
Q12)Explain briefly the working of a general purpose CRO with suitable block
diagram.
Q13)Draw the block diagram of frequency modulated Radio Transmitter and briefly *
explain the functions. .
J-3377[S-1233) 3