Sei sulla pagina 1di 1

RP-2803

RP-2803 3-P Print Server

The external print servers enhance capability by letting you place your printers at convenient locations directly on the Ethernet network, and by
increasing network printer performance and management. Please note that the print server does not support printing with host-based printers,
e.g. CAPT, GDI, PPA.
The print servers support the Simple Network Management Protocol (SNMP), which remote printer management and a warning. A standard
SNMP agent is permanent on these print servers. Any standard SNMP-based application can be used to access and manage these print
servers.
The print servers provide an embedded web server that can be accessed via a proper web browser. We also subsidiary Windows-based
PSAdmin utility which help administrator to setup print server environment.

• Easy-to-use Setup Wizard •Supports SNMP & HP Web JetAdmin


• Supports Internet Printing Protocol (IPP) • Windows Print Monitor Technology
• Supports DHCP Client

CPU •High-performance RISC-cored SoC processor


Flash •1MBytes
System Memory •2MBytes SDRAM
•3 DB-36-pin male Centronics port, supporting bi-directional
Parallel Port
communication
LAN Port •10/100Mbps, auto-sensing, RJ-45(UTP) Connector
•Windows 95/98/98SE/Me, Windows NT 4.0/2000/XP, Mac OS 8.1 or higher, UNIX/Linux,
NOS Support
NetWare (Bindery/NDS)
Network Protocol Support •TCP/IP, IPX, NetBEUI, AppleTalk, LPR, SMB over IP, RAW TCP9100
•Web interface
Management
•Windows-based Setup Program
Default IP Address •192.168.0.10; DHCP: off.
Print Job Log • Yes
Rendezvous • Yes
•Web interface
Software Upgradeable • Window-based Setup Program
•TFTP
Reset Button •Yes
•Power/Status: Red
LED Indicators
•LAN Link: Yellow for 10Mbps, Green for 100Mbps
Power Supply •DC5V/ 2A
Dimension •228* 137 *36 mm
•Operating Temperature: 0 ~ 50℃
Environment •Storage Temperature: -5 ~ 65℃
•Operating Humidity: 0 ~ 70%
•Storage Humidity: 0 ~ 80%
Certifications •FCC Class B, CE

Potrebbero piacerti anche